OHM4031035LKST3040-20.00M - Pletronics, Inc.

to specifications per the terms of the Pletronics standard warranty. Production

processsing does not necessarily include testing of all parameters.

Stratum 3

Oven Controlled Oscillators

March 2007

• Ovenized quartz crystal high precision square

wave generator with a CMOS output.

• 3.3V or 5.0V operation available

• Tube packaging is available.

• 10 to 40 MHz

• Full Size Thru-Hole DIP package

• Electronic Frequency Control (EFC) optional

• Low Jitter - Good phase noise characteristics

Pletronics Inc. certifies this device is in accordance with the

RoHS 6/6 (2002/95/EC) and WEEE (2002/96/EC) directives.

Pletronics Inc. guarantees the device does not contain the following:

Cadmium, Hexavalent Chromium, Lead, Mercury, PBB’s, PBDE’s

Weight of the Device: 6.2 grams

Moisture Sensitivity Level: 1 As defined in J-STD-020C

Second Level Interconnect code: e1

Absolute Maximum Ratings:

Parameter Unit

VCC Supply Voltage -0.5V to +7.0V

Vi Input Voltage -0.5V to VCC + 0.5V

Vo Output Voltage -0.5V to VCC + 0.5V

Reliability: Environmental Compliance

Parameter Condition

Vibration 10 to 2000 Hz / 10 g

Shock 2000 g, 0.3 mS, ½ sine

Solderability MIL-STD-883 Method 2003

Thermal Shock MIL-STD-883 Method 1011, Condition A

Stratum 3

Oven Controlled Oscillators

March 2007

www.pletronics.com 425-776-1880 2

Part Number:

OHM4 048052 LKST3 000 - 19.44M -XX

Internal code or blank

Frequency MHZ (Standards Shown)

12.800 16.384 19.440

20.000 40.000

Electronic Frequency Control

000 = No EFC (Standard)

020 = +_ 2.0 ppm minimum

040 = +_ 4.0 ppm minimum

150 = +_ 15.0 ppm minimum

999 = +_ 4.0 ppm with 0 to 10K ohm

Stratum 3

Supply Voltage

048052 = 5.0V +_ 0.20V operation

031035 = 3.3V +_ 0.20V operation

Series Model

Part Marking:

PLE PLE Where: c= N for no EFC, R for resistor, V for voltage

OHM4050c or OHM403c fff.fff = Frequency in MHz

fff.fff M fff.fff M Ymda = Date code (Year Month Day plus internal code)

ymdannn ymdannn nnn = Device number

Standard values are listed, consult Pletronics Inc. for other options. Specifications such as frequency

stability and operating temperature range, etc. are not identified from the marking. External

packaging labels and packing list will correctly identify the ordered Pletronics part number.

Codes for Date Code YMD

Code 6 7 8 9 0 1 2

Year 2006 2007 2008 2009 2010 2011 2012

Code A B C D E F G H J K L M

Month JAN FEB MAR APR MAY JUN JUL AUG SEP OCT NOV DEC

Code123456789ABC

Day 123456789101112

Code D E F G H J K L M N P R

Day 13 14 15 16 17 18 19 20 21 22 23 24

Code T U V W X Y Z

Day 25 26 27 28 29 30 31

Stratum 3

Oven Controlled Oscillators

March 2007

www.pletronics.com 425-776-1880 3

Specification for 3.30V and 5.00V +_ 0 .20V over the specified temperature range

Item Min Max Unit Condition

Frequency Range 10 40 MHz See list of standard frequencies

Frequency Accuracy vs.

Temperature, Power Supply,

Load and 15 years aging

-4.6 +4.6 ppm

Frequency Stability for 24 hours

vs. Temperature, Power Supply

and Load

-0.28 +0.28 ppb

Short Term Stability -0.5 +0.5 ppb 0.1 second to 30 seconds

-0.05 +0.05 ppb for 1 second

Initial Calibration -1.0 +1.0 ppm

Phase Noise 1 Hz

10 Hz

100 Hz

1,000Hz

-70

-100

-130

-140

dBc/Hz

Warmup -- 30 sec within specification after turn on at 0oC

Output Waveform CMOS

Output High Level 0.5 -- V Below VCC See Load Circuit

Cload = 45 pF

Output Low Level -- 0.4 V

Output Symmetry 45 55 % at 50% of VCC

Trise and Tfall -- 7 nS 10% to 90% of VCC

Power Supply Current

-- 160 mA Vcc = 3.3V at -20oC

70 mA Vcc = 5.0V

-- 110 mA Vcc = 3.3V at +30oC

70 mA Vcc = 5.0v

Warmup -- 250 mA for 30 seconds maximum

Operating Temperature Range -40 +85 oC

Storage Temperature Range -65 +125 oC

Stratum 3

Oven Controlled Oscillators

March 2007

www.pletronics.com 425-776-1880 4

Trise

10% * Vcc

Ground

Vlow

50% * Vcc

90% * Vcc

Vhigh

Tfall

Symmetry

Load Circuit and Test Waveform

ESD Rating

Model Minimum Voltage Conditions

Human Body Model 2000 MIL-STD-883 Method 3115

Charged Device Model 2000 JESD 22-C101

Package Labeling

Label is 1" x 2.6" (25.4mm x 66.7mm) Label is 1" x 2.6" (25.4mm x 66.7mm)

Font is Courier New Font is Arial

Bar code is 39-Full ASCII

Stratum 3

Oven Controlled Oscillators

March 2007

www.pletronics.com 425-776-1880 5

PLE

PCB Mounting (typical for lead free processing)

Hand soldering is recommended at 245oC +_ 5oC for 5 seconds maximum per pin

Mechanical:

Inches mm

Cover:

Kovar

Electroless Nickel Plated

1 μinch (25 μm) typical

Resistance welded to base

Label:

Laser Engraved – or –

White Kapton with Black Letters

Base:

Kovar

Glass to metal sealed leads

Pin 7 Connected to case

Not to scale

A 0.800 +_0.005 20.3 max

B 0.52 +_0.005 13.2 max

C 0.315 max 8.00 max

D10.250 6.35

E10.020 0.51

F10.040 max 1.0 max

G10.110 2.79

H 0.300 7.62

I10.600 15.24

J10.100 2.53

1 Nominal dimension

Pin Function Note

1 EFC Connected to Ground (standard)

–OR–

10 K ohm to ground

–OR–

0.5 to Vsupply control voltage, depends on option ordered.

Use the 30% value for initial operation

7 Ground (GND)

8 Output

14 Supply Voltage

(VCC)

Recommend connecting appropriate power supply bypass capacitors as close as

possible.

Layout and application information

For Optimum Jitter Performance, Pletronics recommends:

• Minimize air flow over the oscillator

• Stabilize the power supply voltage for best performance.

Stratum 3

Oven Controlled Oscillators

March 2007

www.pletronics.com 425-776-1880 6

IMPORTA NT NOTICE

Pletronics Incorporated (PLE) reserves the right to make corrections, improvements, modifications and

other changes to this product at anytime. PLE reserves the right to discontinue any product or service

without notice. Customers are responsible for obtaining the latest relevant information before placing

orders and should verify that such information is current and complete. All products are sold subject to

PLE’s terms and conditions of sale supplied at the time of order acknowledgment.

PLE warrants performance of this product to the specifications applicable at the time of sale in accordance

with PLE’s limited warranty. Testing and other quality control techniques are used to the extent PLE

deems necessary to support this warranty. Except where mandated by specific contractual documents,

testing of all parameters of each product is not necessarily performed.

PLE assumes no liability for application assistance or customer product design. Customers are

responsible for their products and applications using PLE components. To minimize the risks associated

with the customer products and applications, customers should provide adequate design and operating

safeguards.

PLE products are not designed, intended, authorized or warranted to be suitable for use in life support

applications, devices or systems or other critical applications that may involve potential risks of death,

personal injury or severe property or environmental damage. Inclusion of PLE products in such

applications is understood to be fully at the risk of the customer. Use of PLE products in such applications

requires the written approval of an appropriate PLE officer. Questions concerning potential risk

applications should be directed to PLE.

PLE does not warrant or represent that any license, either express or implied, is granted under any PLE

patent right, copyright, artwork or other intellectual property right relating to any combination, machine or

process which PLE product or services are used. Information published by PLE regarding third-party

products or services does not constitute a license from PLE to use such products or services or a

warranty or endorsement thereof. Use of such information may require a license from a third party under

the patents or other intellectual property of the third party, or a license from PLE under the patents or other

intellectual property of PLE.

Reproduction of information in PLE data sheets or web site is permissible only if the reproduction is

without alteration and is accompanied by associated warranties, conditions, limitations and notices.

Reproduction of this information with alteration is an unfair and deceptive business practice. PLE is not

responsible or liable for such altered documents.

Resale of PLE products or services with statements different from or beyond the parameters stated by

PLE for that product or service voids all express and implied warranties for the associated PLE product or

service and is an unfair or deceptive business practice. PLE is not responsible for any such statements.

Contacting Pletronics Inc.

Pletronics Inc. Tel: 425-776-1880

19013 36th Ave. West Fax: 425-776-2760

Lynnwood, WA 98036-5761 USA E-mail: ple-sales@pletronics.com

URL: www.pletronics.com