H11F1M, H11F2M, H11F3M Photo FET Optocouplers Features General Description As a remote variable resistor: 100 to 300M 15pF shunt capacitance 100G I/O isolation resistance The H11FXM series consists of a Gallium-AluminumArsenide IRED emitting diode coupled to a symmetrical bilateral silicon photo-detector. The detector is electrically isolated from the input and performs like an ideal isolated FET designed for distortion-free control of low level AC and DC analog signals. The H11FXM series devices are mounted in dual in-line packages. As an analog switch: Extremely low offset voltage 60 Vpk-pk signal capability No charge injection or latch-up ton, toff 15S UL recognized (File #E90700) Applications As a remote variable resistor: Isolated variable attenuator Automatic gain control Active filter fine tuning/band switching As an analog switch: Isolated sample and hold circuit Multiplexed, optically isolated A/D conversion Schematic Package Outlines ANODE 1 6 CATHODE 2 5 3 4 (c)2007 Fairchild Semiconductor Corporation H11F1M, H11F2M, H11F3M Rev. 1.0.4 OUTPUT TERM. OUTPUT TERM. www.fairchildsemi.com H11F1M, H11F2M, H11F3M -- Photo FET Optocouplers September 2009 Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Symbol Parameter Device Value Units TOTAL DEVICE TSTG Storage Temperature All -40 to +150 C TOPR Operating Temperature All -40 to +100 C TSOL Lead Solder Temperature All 260 for 10 sec C IF Continuous Forward Current All 60 mA VR Reverse Voltage All 5 V EMITTER IF(pk) PD Forward Current - Peak (10s pulse, 1% duty cycle) All 1 A LED Power Dissipation 25C Ambient All 100 mW 1.33 mW/C Derate Linearly from 25C DETECTOR PD Detector Power Dissipation @ 25C All Derate linearly from 25C BV4-6 I4-6 Breakdown Voltage (either polarity) H11F1M, H11F2M Continuous Detector Current (either polarity) (c)2007 Fairchild Semiconductor Corporation H11F1M, H11F2M, H11F3M Rev. 1.0.4 300 mW 4.0 mW/C 30 V H11F3M 15 V All 100 mA www.fairchildsemi.com 2 H11F1M, H11F2M, H11F3M -- Photo FET Optocouplers Absolute Maximum Ratings (TA = 25C unless otherwise specified) Individual Component Characteristics Symbol Parameter Test Conditions Device Min. Typ.* Max. Unit 1.3 1.75 V 10 A EMITTER VF Input Forward Voltage IF = 16mA All IR Reverse Leakage Current VR = 5V All CJ Capacitance V = 0 V, f = 1.0MHz All 50 pF OUTPUT DETECTOR BV4-6 I4-6 Breakdown Voltage Either Polarity Off-State Dark Current I4-6 = 10A, IF = 0 H11F1M, H11F2M 30 H11F3M 15 V V4-6 = 15 V, IF = 0 All 50 nA V4-6 = 15 V, IF = 0, TA = 100C All 50 A R4-6 Off-State Resistance V4-6 = 15 V, IF = 0 All C4-6 Capacitance V4-6 = 15 V, IF = 0, f = 1MHz All M 300 15 pF Transfer Characteristics Symbol Characteristics Test Conditions Device Min Typ* Max Units DC CHARACTERISTICS R4-6 R6-4 On-State Resistance On-State Resistance Resistance, non-linearity and assymetry IF = 16mA, I4-6 = 100A H11F1M 200 H11F2M 330 H11F3M 470 IF = 16mA, I6-4 = 100A H11F1M 200 H11F2M 330 H11F3M 470 IF = 16mA, I4-6 = 25A RMS, f = 1kHz All 2 % AC CHARACTERISTICS ton Turn-On Time RL = 50, IF = 16mA, V4-6 = 5V All 25 s toff Turn-Off Time RL = 50, IF = 16mA, V4-6 = 5V All 25 s Isolation Characteristics Symbol Device Min. VISO Isolation Voltage Characteristic f = 60Hz, t = 1 sec. Test Conditions All 7500 RISO Isolation Resistance VI-O = 500 VDC All 1011 CISO Isolation Capacitance f = 1MHz All Typ.* Max. Units VACPEAK 0.2 pF *All Typical values at TA = 25C (c)2007 Fairchild Semiconductor Corporation H11F1M, H11F2M, H11F3M Rev. 1.0.4 www.fairchildsemi.com 3 H11F1M, H11F2M, H11F3M -- Photo FET Optocouplers Electrical Characteristics (TA = 25C unless otherwise specified.) As per IEC 60747-5-2, this optocoupler is suitable for "safe electrical insulation" only within the safety limit data. Compliance with the safety ratings shall be ensured by means of protective circuits. Symbol Parameter Min. Typ. Max. Unit Installation Classifications per DIN VDE 0110/1.89 Table 1 For Rated Main Voltage < 150Vrms I-IV For Rated Main voltage < 300Vrms I-IV Climatic Classification 55/100/21 Pollution Degree (DIN VDE 0110/1.89) 2 CTI Comparative Tracking Index 175 VPR Input to Output Test Voltage, Method b, VIORM x 1.875 = VPR, 100% Production Test with tm = 1 sec, Partial Discharge < 5pC 1594 Vpeak Input to Output Test Voltage, Method a, VIORM x 1.5 = VPR, Type and Sample Test with tm = 60 sec, Partial Discharge < 5pC 1275 Vpeak VIORM Max. Working Insulation Voltage 850 Vpeak VIOTM Highest Allowable Over Voltage 6000 Vpeak External Creepage 7 mm External Clearance 7 mm Insulation Thickness 0.5 mm Insulation Resistance at Ts, VIO = 500V 109 RIO (c)2007 Fairchild Semiconductor Corporation H11F1M, H11F2M, H11F3M Rev. 1.0.4 www.fairchildsemi.com 4 H11F1M, H11F2M, H11F3M -- Photo FET Optocouplers Safety and Insulation Ratings Figure 1. Resistance vs. Input Current Figure 2. Output Characteristics I46 - OUTPUT CURRENT (A) r(on) - NORMALIZED RESISTANCE 800 10 1 IF = 14mA 400 IF = 10mA IF = 6mA 200 IF = 6mA -200 IF = 10mA -400 IF = 14mA IF = 18mA -800 1 1 0 -0.2 100 -0.1 Figure 3. LED Forward Voltage vs. Forward Current 0.2 Figure 4. Off-state Current vs. Ambient Temperature I46 - NORMALIZED DARK CURRENT 1.8 VF - FOR WARD VOLTAGE (V) 0.1 10000 2.0 1.6 TA = -55C TA = 25C 1.2 1.0 0.0 V46 - OUTPUT VOLTAGE (V) IF - INPUT CURRENT (mA) 1.4 IF = 2mA IF = 2mA 0 -600 Normalized to: IF = 16mA I46 = 5A RMS 0.1 IF = 18mA 600 TA = 100C 0.8 NORMALIZED TO: V46 = 15V IF = 0mA TA = 25C 1000 100 10 1 0.1 1 10 0 100 20 40 60 80 100 TA - AMBIENT TEMPERATURE (C) IF - LED FOR WARD CURRENT (mA) Figure 5. Resistive Non-Linearity vs. D.C. Bias r(on) - CHANGE IN RESISTANCE (%) 5 4 3 2 I4-6 = 10A RMS r(on) = 200 1 0 1 50 100 150 200 250 300 350 V4-6 - D.C. BIAS VOLTAGE (mV) (c)2007 Fairchild Semiconductor Corporation H11F1M, H11F2M, H11F3M Rev. 1.0.4 www.fairchildsemi.com 5 H11F1M, H11F2M, H11F3M -- Photo FET Optocouplers Typical Performance Curves As a Variable Resistor As an Analog Signal Switch ISOLATED SAMPLE AND HOLD CIRCUIT ISOLATED VARIABLE ATTENUATORS 500K + VIN VOUT VIN VIN 50 - VOUT VIN H11F1M H11F1M C IF IF IF VOUT H11F1M VOUT t IF LOW FREQUENCY HIGH FREQUENCY @1MHz DYNAMIC RANGE 50db FOR 0 IF 30mA @10KHz DYNAMIC RANGE 70db FOR 0 IF 30mA Distortion free attenuation of low level A.C. signals is accomplished by varying the IRED current, IF Note the wide dynamic range and absence of coupling capacitors; D.C. level shifting or parasitic feedback to the controlling function. AUTOMATIC GAIN CONTROL Accuracy and range are improved over conventional FET switches because the H11FXM has no charge injection from the control signal. The H11FXM also provides switching of either polarity input signal up to 30V magnitude. . MULTIPLEXED, OPTICALLY-ISOLATED A/D CONVERSION CALL V1 H11F1M CALL Vn DATA ACQUISITION VOUT V1 V2 + H74A1 A/D CONVERTER Vn H11F1M MSB MSB - DATA INPUT VIN LSB H74A1 500K PROCESS CONTROL LOGIC SYSTEM LSB H11F1M IF AGC SIGNAL This simple circuit provides over 70db of stable gain control for an AGC signal range of from 0 to 30mA. This basic circuit can be used to provide programmable fade and attack for electronic music. The optical isolation, linearity and low offset voltage of the H11FXM allows the remote multiplexing of low level analog signals from such transducers as thermocouplers, Hall effect devices, strain gauges, etc. to a single A/D converter. ACTIVE FILTER FINE TUNING/BAND SWITCHING IF1 TEST EQUIPMENT - KELVIN CONTACT POLARITY IF2 H11F1M H11F1M H11F1M IF H11F1M IF A A1 A2 C ITEST A3 DEVICE UNDER TEST PARAMETER SENSING BOARD H11F1M C & D FOR POLARITY 2 D B IF IF TO A & B FOR POLARITY 1 IF H11F1M IF1 ADJUSTS f1, IF2 ADJUSTS f2 The linearity of resistance and the low offset voltage of the H11FXM allows the remote tuning or band-switching of active filters without switching glitches or distortion. This schematic illustrates the concept, with current to the H11F1M IRED's controlling the filter's transfer characteristic. (c)2007 Fairchild Semiconductor Corporation H11F1M, H11F2M, H11F3M Rev. 1.0.4 In many test equipment designs the auto polarity function uses reed relay contacts to switch the Kelvin Contact polarity. These reeds are normally one of the highest maintenance cost items due to sticking contacts and mechanical problems. The totally solid-State H11FXM eliminates these troubles while providing faster switching. www.fairchildsemi.com 6 H11F1M, H11F2M, H11F3M -- Photo FET Optocouplers Typical Applications Through Hole 0.4" Lead Spacing 8.13-8.89 6 4 8.13-8.89 6 4 1 3 6.10-6.60 6.10-6.60 Pin 1 1 3 Pin 1 5.08 (Max.) 0.25-0.36 7.62 (Typ.) 3.28-3.53 5.08 (Max.) 0.25-0.36 3.28-3.53 0.38 (Min.) 2.54-3.81 0.38 (Min.) 2.54-3.81 0.20-0.30 2.54 (Bsc) (0.86) 15 (Typ.) 2.54 (Bsc) (0.86) 0.41-0.51 1.02-1.78 0.20-0.30 0.41-0.51 0.76-1.14 10.16-10.80 1.02-1.78 0.76-1.14 Surface Mount (1.78) 8.13-8.89 6 4 (1.52) (2.54) (7.49) 6.10-6.60 8.43-9.90 (10.54) 1 3 (0.76) Pin 1 Rcommended Pad Layout 0.25-0.36 3.28-3.53 5.08 (Max.) 0.38 (Min.) 0.20-0.30 2.54 (Bsc) (0.86) 0.16-0.88 (8.13) 0.41-0.51 1.02-1.78 0.76-1.14 Note: All dimensions in mm. (c)2007 Fairchild Semiconductor Corporation H11F1M, H11F2M, H11F3M Rev. 1.0.4 www.fairchildsemi.com 7 H11F1M, H11F2M, H11F3M -- Photo FET Optocouplers Package Dimensions Option Order Entry Identifier (Example) No option H11F1M S H11F1SM SR2 H11F1SR2M V H11F1VM TV H11F1TVM IEC60747-5-2 approval, 0.4" Lead Spacing SV H11F1SVM IEC60747-5-2 approval, Surface Mount SR2V H11F1SR2VM Description Standard Through Hole Device Surface Mount Lead Bend Surface Mount; Tape and Reel IEC60747-5-2 approval IEC60747-5-2 approval, Surface Mount, Tape and Reel Marking Information 1 V 3 H11F1 2 X YY Q 6 4 5 Definitions (c)2007 Fairchild Semiconductor Corporation H11F1M, H11F2M, H11F3M Rev. 1.0.4 1 Fairchild logo 2 Device number 3 VDE mark (Note: Only appears on parts ordered with VDE option - See order entry table) 4 One digit year code, e.g., `7' 5 Two digit work week ranging from `01' to `53' 6 Assembly package code www.fairchildsemi.com 8 H11F1M, H11F2M, H11F3M -- Photo FET Optocouplers Ordering Information 12.0 0.1 4.5 0.20 2.0 0.05 0.30 0.05 4.0 0.1 O1.5 MIN 1.75 0.10 11.5 1.0 21.0 0.1 9.1 0.20 0.1 MAX 10.1 0.20 24.0 0.3 O1.5 0.1/-0 User Direction of Feed (c)2007 Fairchild Semiconductor Corporation H11F1M, H11F2M, H11F3M Rev. 1.0.4 www.fairchildsemi.com 9 H11F1M, H11F2M, H11F3M -- Photo FET Optocouplers Carrier Tape Specification H11F1M, H11F2M, H11F3M -- Photo FET Optocouplers Reflow Profile Temperature (C) TP 260 240 TL 220 200 180 160 140 120 100 80 60 40 20 0 Max. Ramp-up Rate = 3C/S Max. Ramp-down Rate = 6C/S tP Tsmax tL Preheat Area Tsmin ts 120 240 360 Time 25C to Peak Time (seconds) Profile Freature Pb-Free Assembly Profile Temperature Min. (Tsmin) 150C Temperature Max. (Tsmax) 200C Time (tS) from (Tsmin to Tsmax) 60-120 seconds Ramp-up Rate (tL to tP) 3C/second max. Liquidous Temperature (TL) 217C Time (tL) Maintained Above (TL) 60-150 seconds Peak Body Package Temperature 260C +0C / -5C Time (tP) within 5C of 260C 30 seconds Ramp-down Rate (TP to TL) 6C/second max. Time 25C to Peak Temperature (c)2007 Fairchild Semiconductor Corporation H11F1M, H11F2M, H11F3M Rev. 1.0.4 8 minutes max. www.fairchildsemi.com 10 Auto-SPMTM Build it NowTM CorePLUSTM CorePOWERTM CROSSVOLTTM CTLTM Current Transfer LogicTM EcoSPARK(R) EfficentMaxTM EZSWITCHTM* TM* (R) (R) Fairchild Fairchild Semiconductor(R) FACT Quiet SeriesTM FACT(R) FAST(R) FastvCoreTM FETBenchTM FlashWriter(R)* FPSTM F-PFSTM FRFET(R) SM Global Power Resource Green FPSTM Green FPSTM e-SeriesTM GmaxTM GTOTM IntelliMAXTM ISOPLANARTM MegaBuckTM MICROCOUPLERTM MicroFETTM MicroPakTM MillerDriveTM MotionMaxTM Motion-SPMTM OPTOLOGIC(R) (R) OPTOPLANAR (R) PDP SPMTM Power-SPMTM PowerTrench(R) PowerXSTM Programmable Active DroopTM QFET(R) QSTM Quiet SeriesTM RapidConfigureTM TM Saving our world, 1mW/W/kW at a timeTM SmartMaxTM SMART STARTTM SPM(R) STEALTHTM SuperFETTM SuperSOTTM-3 SuperSOTTM-6 SuperSOTTM-8 SupreMOSTM SyncFETTM Sync-LockTM (R) * The Power Franchise(R) TinyBoostTM TinyBuckTM TinyLogic(R) TINYOPTOTM TinyPowerTM TinyPWMTM TinyWireTM TriFault DetectTM TRUECURRENTTM* SerDesTM UHC(R) Ultra FRFETTM UniFETTM VCXTM VisualMaxTM XSTM * Trademarks of System General Corporation, used under license by Fairchild Semiconductor. DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD'S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support, device, or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. ANTI-COUNTERFEITING POLICY Fairchild Semiconductor Corporation's Anti-Counterfeiting Policy. Fairchild's Anti-Counterfeiting Policy is also stated on our external website, www.fairchildsemi.com, under Sales Support. Counterfeiting of semiconductor parts is a growing problem in the industry. All manufacturers of semiconductor products are experiencing counterfeiting of their parts. Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, failed applications, and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized Fairchild Distributors who are listed by country on our web page cited above. Products customers buy either from Fairchild directly or from Authorized Fairchild Distributors are genuine parts, have full traceability, meet Fairchild's quality standards for handling and storage and provide access to Fairchild's full range of up-to-date technical and product information. Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address any warranty issues that may arise. Fairchild will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Advance Information Formative / In Design Preliminary First Production No Identification Needed Full Production Obsolete Not In Production Definition Datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. Datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve the design. Datasheet contains specifications on a product that is discontinued by Fairchild Semiconductor. The datasheet is for reference information only. Rev. I40 (c)2007 Fairchild Semiconductor Corporation H11F1M, H11F2M, H11F3M Rev. 1.0.4 www.fairchildsemi.com 11 H11F1M, H11F2M, H11F3M -- Photo FET Optocouplers TRADEMARKS The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not intended to be an exhaustive list of all such trademarks.