EVERLIGHT ELECTRONICS CO.,LTD.
Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 1 of 10
Device No. : DSE-673-036 Prepared date: 18-Aug-2005 Prepared by: Venis Wu
Technical Data Sheet
Full Color Top View LEDs
67-23SDRSYGUBC/TR8
Features
P-LCC-4 package.
White package.
Optical indicator.
Colorless clear window.
Ideal for backlight and light pipe application.
Inter reflector.
Low (2mA) current operation.
Wide viewing angle.
Suitable for vapor-phase reflow, Infrared reflow and
wave solder processes.
Computable with automatic placement equipment.
Available on tape and reel (8mm Tape).
Pb-free.
The product itself will remain within RoHS compliant version.
Descriptions
The 67-23 series is available in soft orange, green,blue
and yellow. Due to the package design, the LED has wide
viewing angle and optimized light coupling by inter
reflector. This feature makes the ideal for light pipe
application. The low current requirement makes this
device ideal for portable equipment or any other
application where power is at a premium.
Applications
Automotive: backlighting in dashboard and switch.
Telecommunication: indicator and backlighting in
telephone and fax.
Flat backlight for LCD’s, switches and symbols.
Light pipe application.
General use.
Device Selection Guide
Chip
Type Material Emitted Color Lens Color
SDR AlGaInP Deep-Red
SYG AlGaInP Brilliant Yellow Green
UB InGaN/SiC Blue
Water Clear
EVERLIGHT ELECTRONICS CO.,LTD.
Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 2 of 10
Device No. : DSE-673-036 Prepared date: 18-Aug-2005 Prepared by: Venis Wu
67-23SDRSYGUBC/TR8
Package Dimensions
For reflow soldering (propose)
L
C
L
C
0.8±0.1
0.15±0.05
1
2
3
4-
-
4
-
Red
+2Green
Blue
3
1
Note: The tolerances unless mentioned is 0.1mm ;Unit = mm.
EVERLIGHT ELECTRONICS CO.,LTD.
Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 3 of 10
Device No. : DSE-673-036 Prepared date: 18-Aug-2005 Prepared by: Venis Wu
67-23SDRSYGUBC/TR8
Absolute Maximum Ratings (Ta=25)
Parameter Symbol Rating Unit
Reverse Voltage VR 5 V
SDR 25
SYG 25
Forward Current IF
UB 30
mA
Operating Temperature Topr -40 ~ +85
Storage Temperature Tstg -40~ +100
SDR 2000
SYG 2000
Electrostatic Discharge(HBM) ESD
UB 1000
V
SDR 60
SYG 60
Power Dissipation Pd
UB 130
mW
SDR 60
SYG 60
Peak Forward Current
(Duty 1/10 @ 1KHZ) IFP UB 100 mA
Soldering Temperature Tsol Reflow Soldering : 260 for 10 sec.
Hand Soldering : 350 for 3 sec.
EVERLIGHT ELECTRONICS CO.,LTD.
Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 4 of 10
Device No. : DSE-673-036 Prepared date: 18-Aug-2005 Prepared by: Venis Wu
67-23SDRSYGUBC/TR8
Electro-Optical Characteristics (Ta=25)
Parameter Symbol Min. Typ. Max. Unit Condition
SDR 63 112 -----
SYG 13 20 -----
Luminous Intensity IV
UB 11 18 -----
mcd IF=20mA
SDR ----- 650 -----
SYG ----- 575 -----
Peak Wavelength p
UB ----- 468 -----
nm IF=20mA
SDR ----- 639 -----
SYG ----- 573 -----
Dominant Wavelength d
UB ----- 470 -----
nm IF=20mA
SDR ----- 20 -----
SYG ----- 20 -----
Spectrum Radiation
Bandwidth
UB ----- 26 -----
nm IF=20mA
SDR ----- 2.0 2.4
SYG ----- 2.0 2.4
Forward Voltage VF
UB ----- 3.5 4.0
V IF=20mA
Viewing Angle 21/2 ----- 120 ----- deg IF=20mA
Reverse Current IR ----- ----- 10 A VR=5V
EVERLIGHT ELECTRONICS CO.,LTD.
Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 5 of 10
Device No. : DSE-673-036 Prepared date: 18-Aug-2005 Prepared by: Venis Wu
67-23SDRSYGUBC/TR8
Typical Electro-Optical Characteristics Curves
EVERLIGHT ELECTRONICS CO.,LTD.
Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 6 of 10
Device No. : DSE-673-036 Prepared date: 18-Aug-2005 Prepared by: Venis Wu
67-23SDRSYGUBC/TR8
Label explanation
CAT: Luminous Intensity Rank
HUE: Dom. Wavelength Rank
REF: Forward Voltage Rank
Reel Dimensions
Note: Tolerances Unless Dimension 0.1mm,Unit = mm
EVERLIGHT ELECTRONICS CO.,LTD.
Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 7 of 10
Device No. : DSE-673-036 Prepared date: 18-Aug-2005 Prepared by: Venis Wu
67-23SDRSYGUBC/TR8
Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel
Note: Tolerances Unless Dimension 0.1mm Unit = mm
Moisture Resistant Packaging
Label Desiccant Label
Aluminum moisture-proof bag
EVERLIGHT ELECTRONICS CO.,LTD.
Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 8 of 10
Device No. : DSE-673-036 Prepared date: 18-Aug-2005 Prepared by: Venis Wu
67-23SDRSYGUBC/TR8
Reliability Test Items And Conditions
The reliability of products shall be satisfied with items listed below.
Confidence level90%
LTPD10%
No. Items Test Condition
Test
Hours/Cycles Sample
Size Ac/Re
1 Reflow Soldering
Temp. : 2605
Min. 5sec. 6 min 22 PCS. 0/1
2 Temperature Cycle
H : +100 15min
5 min
L : -40 15min
300 Cycles 22 PCS. 0/1
3 Thermal Shock
H : +100 5min
10 sec
L : -10 5min
300 Cycles 22 PCS. 0/1
4 High Temperature
Storage Temp. : 100 1000 Hrs. 22 PCS. 0/1
5 Low Temperature
Storage Temp. : -40 1000 Hrs. 22 PCS. 0/1
6 DC Operating Life IF = 20 mA 1000 Hrs. 22 PCS. 0/1
7 High Temperature /
High Humidity 85/ 85%RH 1000 Hrs. 22 PCS. 0/1
EVERLIGHT ELECTRONICS CO.,LTD.
Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 9 of 10
Device No. : DSE-673-036 Prepared date: 18-Aug-2005 Prepared by: Venis Wu
67-23SDRSYGUBC/TR8
Precautions For Use
1. Over-current-proof
Customer must apply resistors for protection, otherwise slight voltage shift will cause big
current change ( Burn out will happen ).
2. Storage
2.1 Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package: The LEDs should be kept at 30 or less and 90%RH or less.
2.3 After opening the package: The LED's floor life is 1 year under 30 deg C or less and 60% RH or less.
If unused LEDs remain, it should be stored in moisture proof packages.
2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the
storage time, baking treatment should be performed using the following conditions.
Baking treatment : 605 for 24 hours.
3. Soldering Condition
3.1 Pb-free solder temperature profile
3.2 Reflow soldering should not be done more than two times.
3.3 When soldering, do not put stress on the LEDs during heating.
3.4 After soldering, do not warp the circuit board.
4.Soldering Iron
Each terminal is to go to the tip of soldering iron temperature less than 350 for 3
seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more
intervals, and do soldering of each terminal. Be careful because the damage of the product is often
started at the time of the hand solder.
EVERLIGHT ELECTRONICS CO.,LTD.
Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 10 of 10
Device No. : DSE-673-036 Prepared date: 18-Aug-2005 Prepared by: Venis Wu
67-23SDRSYGUBC/TR8
5.Repairing
Repair should not be done after the LEDs have been soldered. When repairing is
unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed
beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.
E
VERLIGHT ELECTRONICS CO., LTD. Tel: 886-2-2267-2000, 2267-9936
Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Fax: 886-2267-6244, 2267-6189, 2267-6306
Tucheng, Taipei 236, Taiwan, R.O.C http://www.everlight.com
