R752-R75L MKP Series metallized polyPROPYLENE film capacitor Loose Fig. 1 Taped Fig. 2 Typical applications: This special release is specifically designed for application in serial with the main, with particular protection against severe ambiente conditions. Please contact our Technical Service for more details Fig. 3 PRODUCT CODE: R752 (Digit 12: 0 to 9) R75L Digit 12: 0 to 9) 15p27.5 0.8 Od0.05 p = 37.5 1.0 Pitch (mm) Box thickness (mm) 15.0 15.0 22.5 27.5 37.5 <7.5 7.5 All All All Maximum dimensions (mm) B max H max L max B +0.2 B +0.2 B +0.2 B +0.2 B +0.3 H +0.1 H +0.1 H +0.1 H +0.1 H +0.1 L +0.3 L +0.5 L +0.3 L +0.3 L +0.3 All dimensions are in mm. Product code system The part number, comprising 14 digits, is formed as follows: 1 2 3 4 5 6 7 8 9 10 11 12 R 7 5 13 14 - Digit 1 to 3 Series code. Digit 4 a.c. rated voltage: 2 = 230V L = 250V Digit 5 Pitch: I=15mm; N= 22.5.mm; R=27.5mm; W=37.5mm Digit 6 to 9 Digits 7 - 8 - 9 indicate the first three digits of Capacitance value and the 6th digit indicates the number of zeros that must be added to obtain the Rated Capacitance in pF. Digit 10 to 11 Mechanical version and/or packaging (table 1) Digit 12 Identifies the dimensions and electrical characteristics (0 to 9). Digit 13 Internal use. Digit 14 Capacitance tolerance: K=10%; M=20% Tolerance 5% (J) available upon request GENERAL TECHNICAL DAta Dielectric: polypropylene film. Plates: aluminium layer deposited by evaporation under vacuum. Winding: non-inductive type. Leads: tinned wire. Protection: plastic case, thermosetting resin filled. Box material is solvent resistant and flame retardant according to UL94 V0. Marking: manufacturer's logo, series (R75), dielectric code (MKP), capacitance, tolerance, A.C. rated voltage, manufacturing date code. Climatic category: 55/105/56 IEC 60068-1 Operating temperature range: -55 to +105C Related documents:IEC 60384-16 Winding scheme Table 1 Standard packaging style Lead length (mm) AMMO-PACK AMMO-PACK REEL O 355mm REEL O 500mm REEL O 500mm Loose, short leads Loose, long leads (p15mm) Taping style P2 (mm) 12.70 19.05 12.70 12.70 19.05 Fig. (No.) 2 3 2 2 3 Ordering code single sided metallized polypropylene film (Digit 10 to 11) DQ DQ GY CK CK AA 40 50 Pitch (mm) 15.0 22.5 15.0 15.0 22.5/27.5 04+2 30+5 25+2/-1 Note: Ammo-pack is the preferred packaging for taped version. 185 05/2007 R752-R75L MKP Series metallized polyPROPYLENE film capacitor PRODUCT CODE: R752 (Digit 12: 0 to 9) R75L (Digit 12: 0 to 9) Rated Cap. 0.082 0.10 0.15 0.18 0.22 0.27 0.33 0.47 0.27 0.33 0.47 0.56 0.68 0.82 1.0 1.5 0.47 0.56 0.68 1.0 1.5 2.2 3.3 4.7 1.8 2.2 3.3 4.7 5.6 6.8 F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F 230Vac / 400Vdc* Std dimensions B H L p 5.0 11.0 18.0 15.0 5.0 11.0 18.0 15.0 6.0 12.0 18.0 15.0 6.0 12.0 18.0 15.0 7.5 13.5 18.0 15.0 8.5 14.5 18.0 15.0 8.5 14.5 18.0 15.0 10.0 16.0 18.0 15.0 6.0 15.0 26.5 22.5 6.0 15.0 26.5 22.5 7.0 16.0 26.5 22.5 8.5 17.0 26.5 22.5 10.0 18.5 26.5 22.5 10.0 18.5 26.5 22.5 11.0 20.0 26.5 22.5 13.0 22.0 26.5 22.5 9.0 17.0 32.0 27.5 9.0 17.0 32.0 27.5 9.0 17.0 32.0 27.5 11.0 20.0 32.0 27.5 13.0 22.0 32.0 27.5 14.0 28.0 32.0 27.5 18.0 33.0 32.0 27.5 22.0 37.0 32.0 37.5 11.0 22.0 41.5 37.5 13.0 24.0 41.5 37.5 16.0 28.5 41.5 37.5 19.0 32.0 41.5 37.5 19.0 32.0 41.5 37.5 20.0 40.0 41.5 37.5 Max dv/dt (V/s) 400 400 400 400 400 400 400 400 200 200 200 200 200 200 200 200 130 130 130 130 130 130 130 130 70 70 70 70 70 70 Max K0 (V /s) 240 E3 240 E3 240 E3 240 E3 240 E3 240 E3 240 E3 240 E3 144 E3 144 E3 144 E3 144 E3 144 E3 144 E3 144 E3 144 E3 104 E3 104 E3 104 E3 104 E3 104 E3 104 E3 104 E3 104 E3 56 E3 56 E3 56 E3 56 E3 56 E3 56 E3 Rated Cap. Part Number 2 Mechanical version and packaging (Table1) Internal use Tolerance: K (10%); M (20%) R752I 2820--0-R752I 3100--0-R752I 3150--0-R752I 3180--0-R752I 3220--0-R752I 3270--0-R752I 3330--0-R752I 3470--0-R752N 3270--0-R752N 3330--0-R752N 3470--0-R752N 3560--0-R752N 3680--0-R752N 3820--0-R752N 4100--0-R752N 4150--0-R752R 3470--0-R752R 3560--0-R752R 3680--0-R752R 4100--0-R752R 4150--0-R752R 4220--0-R752R 4330--0-R752R 4470--0-R752W 4180--0-R752W 4220--0-R752W 4330--0-R752W4470--0-R752W4560--0-R752W4680--0-- 0.056 0.068 0.082 0.10 0.15 0.18 0.22 0.27 0.33 0.22 0.27 0.33 0.47 0.56 0.68 0.82 1.0 0.33 0.47 0.56 0.68 1.0 1.5 2.2 3.3 3.9 1.2 1.5 2.2 3.3 4.7 5.6 6.8 10.0 F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F 250Vac / 560Vdc* Std dimensions B H L p 5.0 11.0 18.0 15.0 5.0 11.0 18.0 15.0 5.0 11.0 18.0 15.0 6.0 12.0 18.0 15.0 7.5 13.5 18.0 15.0 7.5 13.5 18.0 15.0 8.5 14.5 18.0 15.0 10.0 16.0 18.0 15.0 10.0 16.0 18.0 15.0 6.0 15.0 26.5 22.5 6.0 15.0 26.5 22.5 7.0 16.0 26.5 22.5 8.5 17.0 26.5 22.5 10.0 18.5 26.5 22.5 11.0 20.0 26.5 22.5 11.0 20.0 26.5 22.5 13.0 22.0 26.5 22.5 9.0 17.0 32.0 27.5 9.0 17.0 32.0 27.5 9.0 17.0 32.0 27.5 11.0 20.0 32.0 27.5 13.0 22.0 32.0 27.5 13.0 25.0 32.0 27.5 18.0 33.0 32.0 27.5 22.0 37.0 32.0 27.5 22.0 37.0 32.0 27.5 11.0 22.0 41.5 37.5 13.0 24.0 41.5 37.5 16.0 28.5 41.5 37.5 19.0 32.0 41.5 37.5 20.0 40.0 41.5 37.5 20.0 40.0 41.5 37.5 24.0 44.0 41.5 37.5 30.0 45.0 41.5 37.5 Max dv/dt (V/s) 500 500 500 500 500 500 500 500 500 250 250 250 250 250 250 250 250 150 150 150 150 150 150 150 150 150 90 90 90 90 90 90 90 90 Max K0 Part Number (V /s) 504 E3 504 E3 504 E3 504 E3 504 E3 504 E3 504 E3 504 E3 504 E3 315 E3 315 E3 315 E3 315 E3 315 E3 315 E3 315 E3 315 E3 188 E3 188 E3 188 E3 188 E3 188 E3 188 E3 188 E3 188 E3 188 E3 113 E3 113 E3 113 E3 113 E3 113 E3 113 E3 113 E3 113 E3 R75LI 2560--0-R75LI 2680--0-R75LI 2820--0-R75LI 3100--0-R75LI 3150--0-R75LI 3180--0-R75LI 3220--0-R75LI 3270--0-R75LI 3330--0-R75LN 3220--0-R75LN 3270--0-R75LN 3330--0-R75LN 3470--0-R75LN 3560--0-R75LN 3680--0-R75LN 3820--0-R75LN 4100--0-R75LR 3330--0-R75LR 3470--0-R75LR 3560--0-R75LR 3680--0-R75LR 4100--0-R75LR 4150--0-R75LR 4220--0-R75LR 4330--0-R75LR 4390--0-R75LW 4120--0-R75LW 4150--0-R75LW 4220--0-R75LW 4330--0-R75LW 4470--0-R75LW 4560--0-R75LW 4680--0-R75LW 5100--0-- 2 Mechanical version and packaging (Table1) Internal use Tolerance: K (10%); M (20%) All dimensions are in mm E12 Series available upon request Note: If the working voltage (V) is lower than the rated voltage (VR), the capacitor may work at higher dv/dt. In this case the maximum value allowed is obtained multiplying the above value (see table dv/dt) with the ratio VR /V. The pulse characteristic K0 depends on the voltage wave-form and in any case it cannot overcome the value given in the above table. The dv/dt test is carried out at 2 times the above values. *Not suitable for EMI filtering applications. 05/2007 186 R752-R75L MKP Series metallized polyPROPYLENE film capacitor PRODUCT CODE: R752 (Digit 12: 0 to 9) R75L (Digit 12: 0 to 9) electrical characteristics test method and performance Rated voltage (VR): 230Vac (400Vdc) - 250Vac (560Vdc) Rated temperature (TR):+85C Damp heat, steady state: Test conditions 1st Temperature derated voltage: The following decreasing factor has to be applied on the rated voltage: +85C to +105C: 2.00% per C for VR (d.c.) +85C to +105C: 0.5% per C for VR (a.c.) Temperature: Relative humidity (RH): Test duration: Performance Capacitance change |C/C|: 2% DF change (tg): 10x10-4 at 1kHz Insulation resistance: 50% of initial limit. Capacitance range: 0.056 F to 10 F. Capacitance values: E12 series (IEC 60063 Norm). Test conditions 2nd Capacitance tolerances (measured at 1 kHz): 10% (K); 20% (M). Temperature: Relative humidity (RH): Test duration: Voltage applied: Total self-inductance (L): (Lead length ~2 mm) Pitch (mm) L (nH) 15 10 22.5 18 27.5 18 37.5 20 C0.1F 04 06 25 0.1<C1.0F 5 8 1<C3.3F 6 Performance 3.3<C10F 10 Test conditions 3rd Temperature: Relative humidity (RH): Test duration: Voltage applied: Insulation resistance: Test conditions Performance +85C2C 85% 2% 250 h VR Performance Temperature: +25C5C Voltage charge time: 1min Voltage charge: 100Vdc 1x105 M for C0.33F (5x105 M)* 30000 s for C >0.33F (150000 s)* * Typical value. +40C2C 93% 2% 56 days VR Capacitance change |C/C|: 5% DF change (tg): 10x10-4 at 1kHz Insulation resistance: 50% of initial limit. Dissipation factor (DF): tgx10-4 at +25C5C kHz 1 10 100 +40C2C 93% 2% 56 days Capacitance change |C/C|: 5% DF change (tg): 10x10-4 at 1kHz Insulation resistance: 50% of initial limit. Endurance: Test conditions Temperature: Test duration: Voltage applied: Test voltage between terminations: 1.6xVR applied for 2 s at +25C5C +85C2C 2000 h 1.25xVR Performance Capacitance change |C/C|: 5% DF change (tg): 10x10-4 at 10kHz for C1F 10x10-4 at 01kHz for C>1F Insulation resistance: 50% of initial limit. Resistance to soldering heat: Test conditions Solder bath temperature: +260C5C Dipping time (with heat screen):10 s1 s Performance Capacitance change |C/C|: 1% DF change (tg): 10x10-4 at 10kHz for C1F 10x10-4 at 01kHz for C>1F Insulation resistance: initial limit. Long term stability (after two years): Storage: standard environmental conditions (see page 12 of DC film capacitors catalogue) Performance Capacitance change |C/C|: 0.5% 187 05/2007