1
G3VM-201G2
MOS FET Relays
Ultrasensitive MOS FET Relays in 200-V Load series
for electric power saving.
•Continuous load current of 200 mA.
■Application Examples ■
Terminal Arrangement/Internal Connections
■List of Models
*The AC peak and DC value are given for the load voltage.
■Absolute Maximum Ratings (Ta = 25°C)
■Electrical Characteristics (Ta = 25°C)
RoHS compliant
Note: The actual product is marked differently from the
image shown here.
•Communication equipment
•Test & Measurement equipment
•Security equipment
•Amusement equipment
•Industrial equipment
•Various battery-driven devices
43
12
OMRON logo
Pin 1 mark
Model name
LOT.No.
932
Mold pin
mark *
-201G2
Note: The actual product is marked differently from the image shown here.
*The indentation in the corner diagonally opposite from the pin 1 mark is from
a pin on the mold.
Package type Contact form Terminals Load voltage
(peak value) *Model Minimum package quantity
Number per tube
Number per tape and reel
SOP4 1a
(SPST-NO) Surface-mounting Terminals 200 V G3VM-201G2 100 -
G3VM-201G2 (TR) -2,500
Item Symbol Rating Unit Measurement conditions
Input
LED forward current IF30 mA
Note: 1. The dielectric strength between the input and
output was checked by applying voltage
between all pins as a group on the LED side and
all pins as a group on the light-receiving side.
Repetitive peak LED forward current
IFP 1 A 100 μs pulses, 100 pps
LED forward current reduction rate
ΔIF/°C−0.3 mA/°C Ta ≥ 25°C
LED reverse voltage VR5 V
Connection temperature
TJ125 °C
Output
Load voltage (AC peak/DC)
VOFF 200 V
Continuous load current (AC peak/DC)
IO200 mA
ON current reduction rate
ΔIO/°C−2.0 mA/°C Ta ≥ 25°C
Pulse ON current
IOP 0.6 A t = 100 ms, Duty = 1/10
Connection temperature
TJ125 °C
Dielectric strength between I/O (See note 1.)
VI-O 1500 Vrms AC for 1 min
Ambient operating temperature
Ta −40 to +85 °C With no icing or condensation
Ambient storage temperature
Tstg −55 to +125 °C With no icing or condensation
Soldering temperature - 260 °C 10 s
Item Symbol
Minimum
Typical
Maximum
Unit Measurement conditions
Input
LED forward voltage VF1.11.271.4 V IF = 10 mA Note: 2. Turn-ON and Turn-OFF Times
Reverse current IR- - 10 μA VR = 5 V
Capacity between terminals
CT- 30 - pF V = 0, f = 1 MHz
Trigger LED forward current
IFT --0.2mA IO = 200 mA
Turn-OFF LED forward current
IFC 0.1 - - mA IOFF = 100 μA
Output
Maximum resistance with output ON
RON - 5 8 Ω
I
F
= 0.5mA, I
O
= 200 mA, t < 1 s
Current leakage when the relay is open
ILEAK - 1 1000 nA VOFF = 200 V
Capacity between terminals
Coff - 90 - pF V = 0, f = 1 MHz
Capacity between I/O terminals
CI-O - 0.8 - pF f = 1 MHz, VS = 0 V
Insulation resistance between I/O terminals
RI-O 1000 108-MΩ
V
I-O
= 500 VDC, R
O
H
≤
60 %
Turn-ON time tON -3.510ms
IF = 0.5 mA, RL = 200 Ω,
VDD = 20 V (See note 2.)
Turn-OFF time tOFF -15ms
VOUT
IF
tONtOFF
10%90%
IF1
2
4
3
RLVDD
VOUT