Notice for TAIYO YUDEN products Please read this notice before using the TAIYO YUDEN products. REMINDERS Product information in this catalog is as of October 2011. All of the contents specified herein are subject to change without notice due to technical improvements, etc. Therefore, please check for the latest information carefully before practical application or usage of the Products. Please note that Taiyo Yuden Co., Ltd. shall not be responsible for any defects in products or equipment incorporating such products, which are caused under the conditions other than those specified in this catalog or individual specification. Please contact Taiyo Yuden Co., Ltd. for further details of product specifications as the individual specification is available. Please conduct validation and verification of products in actual condition of mounting and operating environment before commercial shipment of the equipment. All electronic components or functional modules listed in this catalog are developed, designed and intended for use in general electronics equipment.(for AV, office automation, household, office supply, information service, telecommunications, (such as mobile phone or PC) etc.). Before incorporating the components or devices into any equipment in the field such as transportation,( automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network (telephone exchange, base station) etc. which may have direct influence to harm or injure a human body, please contact Taiyo Yuden Co., Ltd. for more detail in advance. Do not incorporate the products into any equipment in fields such as aerospace, aviation, nuclear control, submarine system, military, etc. where higher safety and reliability are especially required. In addition, even electronic components or functional modules that are used for the general electronic equipment, if the equipment or the electric circuit require high safety or reliability function or performances, a sufficient reliability evaluation check for safety shall be performed before commercial shipment and moreover, due consideration to install a protective circuit is strongly recommended at customer's design stage. The contents of this catalog are applicable to the products which are purchased from our sales offices or distributors (so called"TAIYO YUDEN' s official sales channel"). It is only applicable to the products purchased from any of TAIYO YUDEN's official sales channel. Please note that Taiyo Yuden Co., Ltd. shall have no responsibility for any controversies or disputes that may occur in connection with a third party's intellectual property rights and other related rights arising from your usage of products in this catalog. Taiyo Yuden Co., Ltd. grants no license for such rights. Caution for export Certain items in this catalog may require specific procedures for export according to"Foreign Exchange and Foreign Trade Control Law"of Japan,"U.S. Export Administration Regulations", and other applicable regulations. Should you have any question or inquiry on this matter, please contact our sales staff. 12 notice_e-01 WIRE-WOUND CHIP POWER INDUCTORS (CB SERIES) REFLOW FEATURES APPLICATIONS CB-series are Wound Chip Inductors having wide line-up, which are suitable for any circuit designs. They are suitable for an anti-noise measure on the power supply circuit of DSC, DVC, HDD, LCD-TV, mobile phones,PC, game equipments, various communication equipments and etc.. CBC series has large rated current. They contribute to the miniaturization of the power supply circuit. CBL series has low profile characteristic. They contribute to the lowering of the equipments. CBMF series has a low loss characteristic. OPERATING TEMP. 40 105Including-self-generated heat ORDERING CODE B C 0 1 2 T Type Wound chip power inductor CB C L MF 2 0 External Dimensions mm 1608 0603 1.6x0.8 2012 0805 2.0x1.25 2016 0806 2.0x1.6 2518 1007 2.5x1.8 3225 1210 3.2x2.5 Characteristic Spec Standard High current Low profile Low loss 1 T Packaging Tape & Reel 0 Nominal InductanceH example 1R0 1 100 10 101 100 Inductance Tolerances K 10 M 20 Special code Standard products Low Rdc R type Internal code R=decimal point EXTERNAL DIMENSIONS/STANDARD QUANTITY Type L W T Standard Quantity [pcs] Paper Embossed Tape Tape e C A TYPE MF1608 2012 2016 2518 3218 3225 A 0.55 0.60 0.60 0.60 0.85 0.85 B 0.7 1.0 1.0 1.5 1.7 1.7 Unitmm C 1.0 1.45 1.8 2.0 2.0 2.7 B A Recommended Land Patterns Surface Mounting Mounting and soldering conditions should be checked beforehand. Applicable soldering process to those products is reflow soldering only. Recommended Land Patterns CBMF1608 1.60.2 0.80.2 0.80.2 0.450.15 0.0630.008 0.0310.008 0.0310.008 0.0160.006 3000 CBL2012 2.00.2 1.250.2 0.90.1 0.50.2 0.0790.008 0.0490.008 0.0350.004 0.0200.008 4000 CB2012 CBC2012 2.00.2 1.250.2 1.250.2 0.50.2 0.0790.008 0.0490.008 0.0490.008 0.0200.008 3000 CB2016 CBC2016 2.00.2 1.60.2 1.60.2 0.50.2 0.0790.008 0.0630.008 0.0630.008 0.0200.008 2000 CB2518 CBC2518 2.50.2 1.80.2 1.80.2 0.50.2 0.0980.008 0.0710.008 0.0710.008 0.0200.008 2000 CBC3225 3.20.2 2.50.2 2.50.2 0.60.3 0.1260.008 0.0980.008 0.0980.008 0.0240.012 1000 Unitmm inch AVAILABLE INDUCTANCE RANGE Type CBMF1608 Range CBL2012 CB2012 CBC2012 CB2016 CBC2016 CB2518 CBC2518 CBC3225 InductanceH ImaxmA Rdc30 ImaxmA Rdc30 ImaxmA Rdc30 ImaxmA Rdc30 ImaxmA Rdc30 ImaxmA Rdc30 ImaxmA Rdc30 ImaxmA Rdc30 ImaxmA Rdc30 1 290 1H 0.09 620 1H 0.15 500 1H 0.15 700 1H 0.19 600 1H 0.09 1100 1H 0.1 1200 1H 0.06 1000 1H 0.08 1440 1H 0.055 2.2 190 0.17 440 0.39 410 0.23 530 0.33 510 0.13 720 0.2 510 0.09 890 0.13 1130 0.08 10 115 0.36 205 1.0 190 0.7 240 1.2 250 0.5 350 0.82 250 0.25 480 0.36 900 0.133 2.5 100 4.2 90 3.7 120 5.8 110 2.4 150 4.3 110 0.95 240 1.90 390 0.67 4.5 110 8 60 2.1 160 3.7 270 1.4 60 28 47 50 47H 100 47H 47H 60 7 100H 70 100H 100H 1000 25 24 1000H 680H 100 13 1000H This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. 72 12 wound02_e-02 PART NUMBERS 1608 0603 TYPE Ordering code CBMF1608T1R0M CBMF1608T2R2M CBMF1608T3R3M CBMF1608T4R7M CBMF1608T100 CBMF1608T220 CBMF1608T470 EHS Environmental Hazardous Substances Inductance H RoHS RoHS RoHS RoHS RoHS RoHS RoHS 1.0 2.2 3.3 4.7 10 22 47 Self-resonant frequency MHz min. Resistance DC 30 100 80 60 45 32 16 11 0.09 0.17 0.22 0.24 0.36 1.0 2.5 Self-resonant frequency MHz min. Resistance DC 30 100 80 55 45 38 32 32 28 16 11 10 8 0.15 0.23 0.30 0.40 0.47 0.70 0.50 1.3 1.7 3.7 6.0 7.0 Self-resonant frequency MHz min. Resistance DC 30 100 70 45 40 16 11 0.19 0.33 0.50 1.2 3.7 5.8 Inductance Tolerance Self-resonant frequency MHz min. Resistance DC 30 0.15 0.39 0.66 1.0 2.1 4.2 Inductance Tolerance 20% 10% 20% Rated currentmA Temperature rise current Idc2 290 770 190 560 170 500 145 470 115 380 70 230 50 140 Saturation current Idc1 Measuring frequency MHz 7.96 2.52 Please specify the Inductance tolerance code or 2012(0805)TYPE CB 2012T1R0M CB 2012T2R2M CB 2012T3R3M CB 2012T4R7M CB 2012T6R8M CB 2012T100 CB 2012T100R CB 2012T150 CB 2012T220 CB 2012T470 CB 2012T680 CB 2012T101 EHS Environmental Hazardous Substances Inductance H RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS 1.0 2.2 3.3 4.7 6.8 10 10 15 22 47 68 100 Inductance Tolerance 20% 10% 20% Rated currentmA Temperature rise current Idc2 500 900 410 770 330 650 300 580 250 540 190 440 200 520 170 320 135 280 90 190 70 140 60 130 Saturation current Idc1 Measuring frequency MHz 7.96 2.52 0.796 Please specify the Inductance tolerance code or Ordering code CB C2012T1R0M CB C2012T2R2M CB C2012T4R7M CB C2012T100 CB C2012T220 CB C2012T470 EHS Environmental Hazardous Substances Inductance H RoHS RoHS RoHS RoHS RoHS RoHS 1.0 2.2 4.7 10 22 47 Inductance Tolerance 20% 10% 20% Rated currentmA Temperature rise current Idc2 700 840 530 640 360 520 240 340 170 190 120 150 Saturation current Idc1 Measuring frequency MHz POWER INDUCTORS INDUCTORS Ordering code 7.96 2.52 Please specify the Inductance tolerance code or Ordering code CB L2012T1R0M CB L2012T2R2M CB L2012T4R7M CB L2012T100M CB L2012T220M CB L2012T470M EHS Environmental Hazardous Substances Inductance H RoHS RoHS RoHS RoHS RoHS RoHS 1.0 2.2 4.7 10 22 47 20% 100 80 45 32 23 11 EHS Environmental Hazardous Substances Inductance H Inductance Tolerance Self-resonant frequency MHz min. Resistance DC 30 RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 68 100 100 80 70 55 45 38 32 28 16 14 11 10 8 0.09 0.11 0.13 0.20 0.25 0.35 0.50 0.70 1.0 1.7 2.4 3.0 4.5 Rated currentmA Temperature rise current Idc2 620 950 440 590 275 490 205 370 150 250 100 140 Saturation current Idc1 Measuring frequency MHz 0.1 Please specify the Inductance tolerance code or 2016 0806 TYPE Ordering code CB 2016T1R0M CB 2016T1R5M CB 2016T2R2M CB 2016T3R3M CB 2016T4R7M CB 2016T6R8M CB 2016T100 CB 2016T150 CB 2016T220 CB 2016T330 CB 2016T470 CB 2016T680 CB 2016T101 20% 10% 20% Rated currentmA Temperature rise Saturation current current Idc1 Idc2 600 1100 550 1000 510 1000 400 800 340 740 300 600 250 520 210 440 165 370 130 270 110 240 90 210 70 170 Measuring frequency MHz 7.96 2.52 0.796 Please specify the Inductance tolerance code or The saturation current value Idc1is the DC current value having inductance decrease down to 30%.at 20 The temperature rise current value Idc2is the DC current value having temperature increase up to 40.at 20 This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. wound02_e-02 12 73 PART NUMBERS Ordering code CB C2016T1R0M CB C2016T1R5M CB C2016T2R2M CB C2016T3R3M CB C2016T4R7M CB C2016T6R8M CB C2016T100 CB C2016T150 CB C2016T220 CB C2016T330 CB C2016T470 CB C2016T680 CB C2016T101 EHS Environmental Hazardous Substances Inductance H RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 68 100 Inductance Tolerance 20% 10% 20% Self-resonant frequency MHz min. Resistance DC 30 100 80 70 55 45 38 32 28 16 14 11 10 8 0.10 0.15 0.20 0.27 0.37 0.59 0.82 1.2 1.8 2.8 4.3 7.0 8.0 Self-resonant frequency MHz min. Resistance DC 30 100 80 68 54 46 46 38 30 23 19 15 12 9.5 9.0 7.0 5.5 4.5 3.5 3.0 2.4 0.06 0.07 0.09 0.11 0.10 0.13 0.15 0.25 0.32 0.50 0.70 0.95 1.5 2.1 3.2 4.5 7.0 10 17 24 Self-resonant frequency MHz min. Resistance DC 30 100 80 68 54 41 38 30 23 19 15 12 9.5 9.0 7.0 5.5 4.5 3.5 3.0 0.08 0.11 0.13 0.16 0.20 0.30 0.36 0.65 0.77 1.5 1.9 2.8 3.7 6.1 8.4 12.3 22 28 Rated currentmA Temperature rise Saturation current current Idc1 Idc2 1100 1100 1000 1000 750 720 600 610 550 530 450 450 380 350 300 300 250 240 220 220 150 150 130 130 110 110 Measuring frequency MHz 7.96 2.52 0.796 Please specify the Inductance tolerance code or 2518 1007 TYPE Ordering code CB 2518T1R0M CB 2518T1R5M CB 2518T2R2M CB 2518T3R3M CB 2518T4R7MR CB 2518T4R7M CB 2518T6R8M CB 2518T100 CB 2518T150 CB 2518T220 CB 2518T330 CB 2518T470 CB 2518T680 CB 2518T101 CB 2518T151 CB 2518T221 CB 2518T331 CB 2518T471 CB 2518T681 CB 2518T102 EHS Environmental Hazardous Substances Inductance H RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS 1.0 1.5 2.2 3.3 4.7 4.7 6.8 10 15 22 33 47 68 100 150 220 330 470 680 1000 Inductance Tolerance 20% 10% 20% Rated currentmA Temperature rise current Idc2 1200 1500 650 1400 510 1300 440 1200 310 1200 340 1100 270 930 250 820 180 650 165 580 130 460 110 420 70 310 60 260 210 55 50 180 40 140 35 120 30 90 25 75 Saturation current Idc1 Measuring frequency MHz 7.96 2.52 0.796 0.252 Please specify the Inductance tolerance code or Ordering code CB C2518T1R0M CB C2518T1R5M CB C2518T2R2M CB C2518T3R3M CB C2518T4R7M CB C2518T6R8M CB C2518T100 CB C2518T150 CB C2518T220 CB C2518T330 CB C2518T470 CB C2518T680 CB C2518T101 CB C2518T151 CB C2518T221 CB C2518T331 CB C2518T471 CB C2518T681 EHS Environmental Hazardous Substances Inductance H RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 68 100 150 220 330 470 680 Inductance Tolerance 20% 10% 20% Rated currentmA Temperature rise current Idc2 1000 1200 950 1190 890 1100 730 1020 680 920 550 740 480 680 350 500 320 460 270 320 240 290 200 200 160 170 140 130 110 115 100 90 80 70 65 60 Saturation current Idc1 Measuring frequency MHz 7.96 2.52 0.796 Please specify the Inductance tolerance code or The saturation current value Idc1is the DC current value having inductance decrease down to 30%.at 20 The temperature rise current value Idc2is the DC current value having temperature increase up to 40.at 20 This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. 74 12 wound02_e-02 PART NUMBERS 3225 1210 TYPE Ordering code Inductance H RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 68 100 220 820 1000 CB C3225T1R0MR CB C3225T1R5MR CB C3225T2R2MR CB C3225T3R3MR CB C3225T4R7MR CB C3225T6R8MR CB C3225T100R CB C3225T150R CB C3225T220R CB C3225T330R CB C3225T470R CB C3225T680R CB C3225T101R CB C3225T221R CB C3225T821R CB C3225T102R Inductance Tolerance 20% 10% 20% Self-resonant frequency MHz min. Resistance DC 30 250 220 190 160 70 50 23 20 17 13 10 8 6 3 1.8 1.6 0.055 0.060 0.080 0.095 0.100 0.120 0.133 0.195 0.27 0.41 0.67 1.0 1.4 2.5 12 13 Rated currentmA Temperature rise current Idc2 2000 1440 2000 1310 2000 1130 2000 1040 1250 1010 950 940 900 900 730 850 620 780 500 570 390 480 320 410 270 340 190 190 110 110 100 100 Measuring frequency MHz Saturation current Idc1 0.1 Please specify the Inductance tolerance code or The saturation current value Idc1is the DC current value having inductance decrease down to 30%.at 20 The temperature rise current value Idc2is the DC current value having temperature increase up to 40.at 20 ELECTRICAL CHARACTERISTICS DC Bias characteristics Measured by HP4285A42841A CBMF1608 CBL2012 CB2012 100 Inductance H Inductance H 1R0M 10 100M 4R7M 1 10 100 DC Bias mA 1 1000 1 10 100 DC Bias mA CB2016 100 1R0M 1 0.1 Inductance H Inductance H 101 10 1 10 1R0M 1 1 10 100 1000 DC Bias mA 10000 101 100 10 1R0M 1 1 10 1R0M 1 0.1 10000 1 10 100 DC Bias mA 100 1000 DC Bias mA 10000 1000 101 100 100 10 1R0M 1 0.1 1000 CBC2518 1000 100 0.1 100 1000 DC Bias mA 100 10 CB2518 1000 100 100 10 CBC2016 1000 470 101 100 0.1 1000 Inductance H 1 100 Inductance H 470M 4R7M 10 CBC2012 1000 Inductance H 100 Inductance H 100 POWER INDUCTORS INDUCTORS EHS Environmental Hazardous Substances 1 10 100 1000 DC Bias mA 10000 101 100 100 10 1R0M 1 0.1 1 10 100 1000 DC Bias mA 10000 CBC3225 1000 Inductance H 102R 100 101R 10 100R 1 1R0MR 0.1 1 10 100 1000 DC Bias mA 10000 This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. wound02_e-02 12 75 PACKAGING Minimum Quantity Leader and Blank Portion Type LBC3225/CBC3225 LB3218 LBR2518/LBC2518/LB251 /CB2518/CBC2518/LEM2520 LBM2016/LBC2016/ LB2016/CB2016/CBC2016 LB2012/LBC2012/LBR202 /CB2012/CBC2012 CBL2012 LB1608 LBMF1608/CBMF1608 Standard Quantitypcs Papar Tape Embossed Tape 1000 2000 2000 2000 3000 4000 4000 3000 (10 pitches or more) (10 pitches or more) 150mm or more (5.9 inches or more) Reel Size 0.039 60 1 ) -02.36 -0 Embossed tape 180 0 7.09 0 -3 -0.118 ) 2.5 max 0.098 Tape material 10.01.5 (0.3940.059) Top Tape Strength The top tape requires a peel-off force 0.2 to 0.7N in the direction of the arrow as illustrated below. Pull direction Taping Dimensions Embossed Tape0.315 inches wide Card board carrier tape0.315 inches wide Chip cavity Type LBM 2016 LEM 2520 LBC3225/ CBC3225 LB3218 A Insertion pitch B F Tape thickness T K 2.10.1 4.00.1 0.30.05 1.9max. 1.750.1 0.0690.0040.0830.0040.1570.0040.0120.002 0.075max. 2.70.1 4.00.1 0.30.05 2.10.1 2.30.1 0.0910.004 0.1060.0040.1570.0040.0120.0020.0830.004 2.80.1 3.50.1 4.00.1 0.30.05 4.0max. 0.1100.0040.1380.0040.1570.0040.0120.002 0.157max. 3.50.1 4.00.1 0.30.05 2.2max. 2.10.1 0.0830.004 0.1380.0040.1570.0040.0120.002 0.087max. LB2518 / CB2518 2.150.1 2.70.1 4.00.1 0.30.05 2.2max. LBC2518 / CBC2518 0.0850.004 0.1060.0040.1570.0040.0120.002 0.087max. LBR2518 LB2016/ CB2016 1.750.1 2.10.1 4.00.1 0.30.05 1.9max. LBC2016 / CBC2016 0.0690.0040.0830.0040.1570.0040.0120.002 0.075max. LB2012 / CB2012 1.450.1 2.250.1 4.00.1 0.250.05 1.45max. LBC2012 / CBC2012 0.0570.004 0.0890.004 0.1570.0040.0100.002 0.057max. LBR2012 2.30.1 4.00.1 1.1max. 1.1max. 1.550.1 CBL2012 0.0610.004 0.0910.004 0.1570.004 0.043max. 0.043max. 1.80.1 4.00.1 1.1max. 1.1max. 1.00.1 LB1608 0.0390.004 0.0710.004 0.1570.004 0.043max. 0.043max. 1.10.1 1.90.1 4.00.1 0.250.05 1.2max. LBMF1608 / CBMF1608 0.0430.004 0.0750.004 0.1570.0040.0100.002 0.047max. Unitmm inch This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. wound0103_reli_e-01 12 wound0103_reli-PRP1 RELIABILITY DATA 1.Operating temperature Range LB, LBC, LBR, LBMF Series CB, CBC, CBL, CBMF Series LBM Series LEM Series Including self-generated heat 40105 4085 2.Storage LB, LBC, LBR, LBMF Series CB, CBC, CBL, CBMF Series LBM, LEM Series Test Methods and Remarks Please refer the term of "7. storage conditions" in precautions. 4085 3.Rated Current LB, LBC, LBR, LBMF Series CB, CBC, CBL, CBMF Series Within the specified tolerance LBM, LEM Series Test Methods and Remarks LEM Series The maximum DC value having inductance decrease within 10 and temperature increase within 20 by the application of DC bias. 4.Inductance LB, LBC, LBR, LBMF Series CB, CBC, CBL, CBMF Series LBM, LEM Series Test Methods and Remarks LEM Series Within the specified tolerance LBLBCLBRCBCBCCBLLBMFCBMFLBM Series Measuring equipmentLCR Meter HP4285A42851A or its equivalent Measuring frequencySpecified frequency Measuring equipmentLCR Mater HP4285A or its equivalent 5.Q LB, LBC, LBR, LBMF Series CB, CBC, CBL, CBMF Series LBM, LEM Series Test Methods and Remarks LEM Series Measuring equipmentLCR MeterHP4285A42851A or its equivalent Measuring frequencySpecified frequency LBM Series Measuring equipmentLCR Mater HP4285A or its equivalent 6.DC Resisitance LB, LBC, LBR, LBMF Series CB, CBC, CBL, CBMF Series LBM, LEM Series Test Methods and Remarks Measuring equipmentDC Ohmmeter HIOKI 3227 or its equivalent Within the specified tolerance 7.Self-Resonant Frequency LB, LBC, LBR, LBMF Series CB, CBC, CBL, CBMF Series LBM, LEM Series Test Methods and Remarks Measuring equipmentImpedance analyzer HP4291A or its equivalent 8.Temperature Characteristic LBM2016 LEM2520 CB2012 CBL2012 LB1608 LB2012 LBR2012 CB2016 LB2518 LBR2518 CB2518 LBC3225 CBC2016 LBC2518 LBMF1608 CBMF1608 LBC2016 CBC2518 LB3218 LBC2012 CBC2012 Test Methods and Remarks Change of maximum inductance deviation in step 1-5 LB, CB Series Step 1 2 LEM2520 Within the specified tolerance Within the specified tolerance Inductance change:Within5 LB2016 CBC3225 Inductance change:Within20 Inductance change:Within25 Inductance change:Within35 Temperture 20 40 3 4 20Reference temperature 85Maximum operating temperature 5 20 Step Temperture 1 20 2 25 3 4 20Reference temperature 85Maximum operating temperature 5 20 9.Rasistance to Flexure of Substrate LB, LBC, LBR, LBMF Series CB, CBC, CBL, CBMF Series LBM, LEM Series Test Methods and Remarks Warp 2mm LBLBCLBRCBCBCCBLLBMLBMFCBMF Series 3mm LEM2520 Test substrate: Board according to JIS C0051 No damage. Pressing jig LEM25201.6mm LBLBMF CBMF1608 0.8mm Others1.0mm Board This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. wound0103_reli-PRP2 12 wound0103_reli_e-01 RELIABILITY DATA 10.Body Strength LB, LBC, LBR, LBMF Series CB, CBC, CBL, CBMF Series LBM, LEM Series Test Methods and Remarks LBLBCLBRCBCBCCBLLBMLEM2520 LB1608LBMF1608CBMF1608 No damage. Applied force10N Duration10sec. Applied force5N Duration10sec. 11.Adhesion of terminal electrode LB, LBC, LBR, LBMF Series CB, CBC, CBL, CBMF Series LBM, LEM Series Test Methods and Remarks LBLBCLBRCBCBCCBLLBMLBMFCBMFLEM2520 LB1608CBMF1608LBMF1608 No abnormality. Applied force10N to X and Y directions Duration5 sec. Test substratePrinted board Applied force5N to X and Y directions Duration5 sec. Test substratePrinted board 12.Resistance to vibration LB, LBC, LBR, LBMF Series Inductance change:Within10 CB, CBC, CBL, CBMF Series LBM, LEM Series Inductance change:Within5 Test Methods and Remarks LEMLBLBCLBRCBCBCCBLLBMLBMFCBMFAccording to JIS C5102 clause 8.2. Vibration typeA Directions2 hrs each in X, Y and Z directions. Total6 hrs Frequency range10 to 55 to 10 Hz1min. Amplitude1.5mm Mounting methodSoldering onto printed board RecoveryAt least 2 hrs of recovery under the standard condition after the test, followed by the measurement within 48 hrs. LEMRecovery At least 1 hr of recovery under the standard condition after the test, followed by the measurement within 2 hrs. 13.Drop test LB, LBC, LBR, LBMF Series CB, CBC, CBL, CBMF Series LBM Series LEM Series Inductance change:Within5 Test Methods and Remarks LEM Acceleration980m/sec2 Duration6msec Number of times6 sides x 3 times Mounting methodSoldering onto printed board RecoveryAt least 2 hrs of recovery under the standard condition after the test, followed by the measurement within 48 hrs. LEMRecovery At least 1 hr of recovery under the standard condition after the test, followed by the measurement within 2 hrs. 14.Solderability LB, LBC, LBR, LBMF Series CB, CBC, CBL, CBMF Series LBM, LEM Series Test Methods and Remarks LEM No significant abnormality in appearance. No significant abnormality in appearance. No significant abnormality in appearance. At least 90 of surface of terminal electrode is covered by new Solder temperature2305 Duration50.5sec. FluxMethanol solution with 25 of colophony LBLBCLBRCBCBCCBLLBMLBMFCBMF Solder temperature2455 Duration50.5sec FluxMethanol solution with 25 of colophony This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. wound0103_reli_e-01 12 wound0103_reli-PRP3 RELIABILITY DATA 15.Resistance to soldering LB, LBC, LBR, LBMF Series Inductance change:Within10 CB, CBC, CBL, CBMF Series LEM Series Inductance change:Within5 LEM2520 No significant abnormality in appearance. Test Methods and Remarks LEM Reflow condition 3 times of reflow over at 2205 for 40sec. MAX, With Peak temperature at 2405 for 5 sec. MAX.Refer to a Profile of chart below. Flow condition Solder temperature2605 Duration101sec. Once LBLBCLBRCBCBCCBLLBMLBMFCBMF 3 times of reflow oven at 230 MIN for 40sec. with peak temperature at 260 for 5sec. 16.Resisitance to solvent LB, LBC, LBR, LBMF Series CB, CBC, CBL, CBMF Series LBM, LEM Series Test Methods and Remarks Solvent temperatureRoom temperature Type of solventIsopropyl alcohol Cleaning conditions90s. Immersion and cleaning. No significant abnormality in appearance 17.Thermal shock LB, LBC, LBR, LBMF Series CB, CBC, CBL, CBMF Series LBM Series Inductance change:Within10 Inductance change :Within10 Q R124R730 min. 5R633025 min. 39082020 min. 10115 min. LEM Series Test Methods and Remarks LEM : Conditions for 1cycle No significant abnormality in appearance. Step 1 2 Temperature 40 85 Duration min 30 30 Number of cycle100 cycle RecoveryAt least 1 hr of recovery under the standard condition after the test, followed by the measurement within 2 hrs. LBLBCLBRCBCBCCBLLBMLBMFCBMF 4085, maintain times 30min. ,100 cycle RecoveryAt least 2 hrs of recovery under the standard condition after the test, followed by the measurement within 48 hrs. 18.Damp heat life test LB, LBC, LBR, LBMF Series CB, CBC, CBL, CBMF Series LBM Series LEM Series Inductance change:Within10 No significant abnormality in appearance. Inductance change :Within10 Q R124R730 min. 5R633025 min. 39082020 min. 10115 min. Test Methods and Remarks Temperature602 Humidity9095RH Duration1000 hrs RecoveryAt least 2 hrs of recovery under the standard condition after the test, followed by the measurement within 48 hrs. LEMRecovery At least 1 hr of recovery under the standard condition after the test, followed by the measurement within 2 hrs. 19.Loading under damp heat life test LB, LBC, LBR, LBMF Series CB, CBC, CBL, CBMF Series LBM Series LEM Series Inductance change:Within10 No significant abnormality in appearance. Inductance change :Within10 Q R124R730 min. 5R633025 min. 39082020 min. 10115 min. Test Methods and Remarks Temperature602 Humidity9095RH Duration1000 hrs Applied currentRated current RecoveryAt least 2 hrs of recovery under the standard condition after the test, followed by the measurement within 48 hrs. LEMRecovery At least 1 hr of recovery under the standard condition after the test, followed by the measurement within 2 hrs. This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. wound0103_reli-PRP4 12 wound0103_reli_e-01 RELIABILITY DATA 20.High temperature life test LB, LBC, LBR, LBMF Series CB, CBC, CBL, CBMF Series LBM Series LEM Series Inductance change:Within10 No significant abnormality in appearance. Inductance change :Within10 Q R124R730 min. 5R633025 min. 39082020 min. 10115 min. Test Methods and Remarks Temperature852 Duration1000 hrs RecoveryAt least 2 hrs of recovery under the standard condition after the test, followed by the measurement within 48 hrs. LEMRecovery At least 1 hr of recovery under the standard condition after the test, followed by the measurement within 2 hrs. 21.Loading at high temperature life test LB, LBC, LBR, LBMF Series Inductance change:Within10 CB, CBC, CBL, CBMF Series LBM, LEM Series Test Methods and Remarks Temperature852 Duration1000 hrs Applied currentRated current RecoveryAt least 2 hrs of recovery under the standard condition after the test, followed by the measurement within 48 hrs. 22.Low temperature life test LB, LBC, LBR, LBMF Series CB, CBC, CBL, CBMF Series LBM Series LEM Series Inductance change:Within10 No significant abnormality in appearance. No significant abnormality in appearance. Inductance change :Within10 Q R124R730 min. 5R633025 min. 39082020 min. 10115 min. Test Methods and Remarks Temperature402 Duration1000 hrs RecoveryAt least 2 hrs of recovery under the standard condition after the test, followed by the measurement within 48 hrs. LEMRecovery At least 1 hr of recovery under the standard condition after the test, followed by the measurement within 2 hrs. 23.Standard condition LB, LBC, LBR, LBMF Series CB, CBC, CBL, CBMF Series LBM, LEM Series Standard test conditions Unless specified, Ambient temperature is 2015 and the Relative humidity is 65 20. If there is any doubt about the test results, further measurement shall be had within the following limits: Ambient Temperature: 202 Relative humidity: 655 Inductance value is based on our standard measurement systems. This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. wound0103_reli_e-01 12 wound0103_reli-PRP5 PRECAUTIONS LEM TypeLB TypeCB Type 1Circuit Design Operating environment 1The products described in this specification are intended for use in general electronic equipment,(office supply equipment, telecommunications systems, measuring equipment, and household equipment). They are not intended for use in mission-critical equipment or systems requiring special quality and high Precautions reliability (traffic systems, safety equipment, aerospace systems, nuclear control systems and medical equipment including life-support systems,) where product failure might result in loss of life, injury or damage. For such uses, contact TAIYO YUDEN Sales Department in advance. 2PCB Design Land pattern design Precautions 1Please contact any of our offices for a land pattern, and refer to a recommended land pattern of a right figure or specifications. PRECAUTIONS Technical Recommended Land Patterns considerSurface Mounting ations Mounting and soldering conditions should be checked beforehand. Applicable soldering process to those products is reflow soldering only. 3Considerations for automatic placement Adjustment of mounting machine Precautions 1. Excessive impact load should not be imposed on the products when mounting onto the PC boards. 2. Mounting and soldering conditions should be checked beforehand. Technical consider- 1. When installing products, care should be taken not to apply distortion stress as it may deform the products. ations 4Soldering Wave solderingLEM Type only 1For wave soldering,please apply conditions meeting the range of the specifed conditions in our catalog or the relevant specifications. Reflow solderingLB and CB Types 1For reflow soldering with either leaded or lead-free solder,the profile specified in "point for controlling" is recommended. Precautions Reflow solderingLEM 1For reflow soldering, please apply conditions meeting the range of the specified conditions in our catalog or the relevant specifications. Recommended conditions for using a soldering iron 1Put the soldering iron on the land-pattern. Soldering iron's temperature - Below 350 Duration-3 seconds or less. The soldering iron shoud not come in contact with inductor directly. Wave solderingLEM Type only 1Components can be damaged by excessive heat where soldering conditions exceed the specified range. Reflow solderingLB and CB Types 1Reflow profile 300 Peak Temp: 2600/5 5 sec Max 250 Technical considerations 200 180 230 Minn Pre-heat zone 150 150 100 9030 sec 3010 sec 50 0 Recommended conditions for using a soldering iron 1Components can be damaged by excessive heat where soldering conditions exceed the specified range. 5Cleaning Precautions Technical considerations Cleaning conditions Washing by supersonic waves shall be avoided. Cleaning conditions If washed by supersonic waves, the products might be broken. 6Handling Handling 1There is a case that a characteristic varies with magnetic influence. Breakaway PC boardssplitting along perforations Precautions 1Planning pattern configurations and the position of products should be carefully performed to minimize stress. Mechanical considerations 1There is a case to be damaged by a mechanical shock. Handling 1Keep the inductors away from all magnets and magnetic objects. Technical Breakaway PC boardssplitting along perforations 1When splitting the PC board after mounting inductors, care should be taken not to give any stresses of deflection or twisting to the board. consider2Board separation should not be done manually, but by using the appropriate devices. ations Mechanical considerations 1Please do not give the inductors any excessive mechanical shocks. 7Storage conditions Storage Precautions 1Under a high temperature and humidity environment, problems such as reduced solderability caused by oxidation of terminal electrodes and deterioration of taping/packaging materials may take place. Storage 1To maintain the solderability of terminal electrodes and to keep the packing material in good condition, temperature and humidity in the storage area should be controlled. Recommended conditions Technical Ambient temperature040 HumidityBelow 70% RH considerThe ambient temperature must be kept below 30 even under ideal storage conditions, solderability of products electrodes may decrease as time passes. For ations this reason, LE type inductors should be used within one year from the time of delivery. LB typeShould be used within 6 months from the time of delivery. LE typeIn case of storage over 6 months, solderability shall be checked before actual usage. This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. wound0103_reli-PRP6 12 wound0103_reli_e-01