UNISONIC TECHNOLOGIES CO., LTD
2N3906 PNP EPITAXIAL PLANAR TRANSISTOR
www.unisonic.com.tw 1 of 3
Copyright © 2012 Unisonic Technologies Co., LTD QW-R201-028, C
GENERAL PURPOSE
APPLIATION
FEATURES
* Collector-Emitter Voltage: VCEO=40V
* Collector Dissipation: Pc(MAX)=625mW
* Complementary to UTC 2N3904
TO-92
1
ORDERING INFORMATION
Ordering Number Package Pin Assignment Packing
Lead Free Halogen Free 1 2 3
2N3906L-T92-B 2N3906G-T92-B TO-92 E B C Tape Box
2N3906L-T92-K 2N3906G-T92-K TO-92 E B C Bulk
2N3906L-T92-R 2N3906G-T92-R TO-92 E B C Tape Reel
Note: Pin Assignment: E: EMITTER B: BASE C: COLLECTOR
2N3906 PNP EPITAXIAL PLANAR TRANSISTOR
UNISONIC TECHNOLOGIES CO., LTD 2 of 3
www.unisonic.com.tw QW-R201-028, C
ABSOLUTE MAXIMUM RATING ( TA=25°С, unless otherwise specified )
PARAMETER SYMBOL RATINGS UNIT
Collector-Base Voltage VCBO -40 V
Collector-Emitter Voltage VCEO -40 V
Emitter-Base Voltage VEBO -5 V
Collector Current IC -200 mA
Base Current IB -50 mA
Collector dissipation PC 625 mW
Junction Temperature TJ 125 °С
Operating Temperature TOPR -20 ~ +85 °С
Storage Temperature TSTG -40 ~ +150 °С
Note: 1. Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.
ELECTRICAL CHARACTERISTICS (TA=25°С, unless otherwise specified)
PARAMETER SYMBOL TEST CONDITIONS MIN TYP MAX UNIT
Collector Cut-Off Current ICE
X
V
CE=-30V, VEB=-3V -50 nA
Base Cut-Off Current IBL V
CE=-30V, VEB=-3V -50 nA
Collector-Base Breakdown Voltage VCBO I
C=-10μA, IE=0 -40 V
Collector-Emitter Breakdown Voltage VCEO I
C=-1mA, IB=0 (Note) -40 V
Emitter-Base Breakdown Voltage VEBO I
E=-10μA, IC=0 -6 V
DC Current Gain (Note)
hFE1 V
CE=-1V, IC=-0.1mA 60
hFE2 V
CE=-1V, IC=-1mA 80
hFE3 V
CE=-1V, IC=-10mA 100 300
hFE4 V
CE=-1V, IC=-50mA 60
hFE5 V
CE=-1V, IC=-100mA 30
Collector-Emitter Saturation Voltage
(Note)
VCE
(
SAT
)
1IC=-10mA, IB=-1mA -0.25 V
VCE
(
SAT
)
2IC=-50mA, IB=-5mA -0.4
Base-Emitter Saturation Voltage VBE
(
SAT
)
1IC=-10mA, IB=-1mA -0.65 -0.85 V
VBE
(
SAT
)
2IC=-50mA, IB=-5mA -0.95
Transition Voltage fT V
CE=-20V, IC=-10mA, f=100MHz 250 MHz
Output Capacitance COB V
CB=-5V, IE=0, f=1MHz 4.5 pF
Turn On Time tON V
CC=-3V, VBE=-0.5V, IC=-10mA, IB1=-1mA 70 ns
Turn Off Time tOFF I
B1=1B2=-1mA 300 ns
Note: Pulse test: PW<=300μs, Duty Cycle<=2%
2N3906 PNP EPITAXIAL PLANAR TRANSISTOR
UNISONIC TECHNOLOGIES CO., LTD 3 of 3
www.unisonic.com.tw QW-R201-028, C
TYPICAL CHARACTERISTICS
Voltage, V(V)
Voltage, V(V)
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.
