Model 100 Vishay Spectrol 1 5/16" (33.3 mm) Single Turn Wirewound Precision Potentiometer FEATURES * Gangable up to 6 sections * Extra taps on request RoHS * Bushing and servo mount types available COMPLIANT * Ohmic value range: 5 up to 35 k ELECTRICAL SPECIFICATIONS PARAMETER SPECIAL to 35 k 1% 3% STANDARD 5 to 20 k 3% 5% Total Resistance: Tolerance: 50 and Above Below 50 End Voltage Linearity x total applied voltage for total resistance above 20 . 2.0 % of total applied voltage for 20 and below Linearity (Independent): 5 to 100 100 to 500 500 to 3 k 3 k to 15 k 15 k and above STANDARD 1.0 % 0.5 % 0.5 % 0.5 % 0.5 % BEST PRACTICAL 0.50 % 0.35 % 0.25 % 0.20 % 0.15 % 100 ENR (MIL-R-12934) Noise Electrical Angle 352 2 Power Rating 2.75 W at 40 C ambient Insulation Resistance 100 M min, 500 VDC Dielectric Strength 1000 VRMS, 60 Hz Taps (Extra) Up to 13 (position tolerance: 1) CCW taps of multiple sections aligned with CCW tap of section 1 to 1 Phasing Linearity x total resistance or 0.5 , whichever is greater Absolute Minimum Resistance ORDERING INFORMATION/DESCRIPTION The Model 100 can be ordered from this data sheet with a variety of alternate characteristics, as shown. For most rapid service on your order, please state: 100 S 1 10K BO1 MODEL MOUNTING TYPE NUMBER OF SECTIONS OHMIC VALUE PACKAGING B: Bushing S: Servo Up to 6 sections Box of 1 piece Other characteristics will be standard as described on this data sheet. If special characteristics are required, such as: special linearity tolerance, special resistance tolerance, extra taps, non-linear functions, etc., please state these on your order and allow additional lead time for delivery. SAP PART NUMBERING GUIDELINES 100 B 2 203 502 B01 MODEL STYLE NUMBER OF SECTIONS OHMIC VALUE OHMIC VALUE PACKAGING Section NO 1: 20K Section NO 2: 5K Box of 1 piece Bushing www.vishay.com 80 For technical questions, contact: sfer@vishay.com Document Number: 57034 Revision: 28-Jun-07 Model 100 1 5/16" (33.3 mm) Single Turn Wirewound Precision Potentiometer Vishay Spectrol DIMENSIONS in inches (millimeters) BUSHING MOUNT: 100B... 0.010 0.705 (17.91) 1 0.242 MIN. (6.15) 0.031 0.875 (22.22) 0.375 (9.52) 3 22 1/2 TYP. + 0.0000 - 0.0010 0.031 1 O 0.4062 MTG. (10.32) 0.062 (1.57) 0.2497 (6.34) 2 + 0.0000 - 0.0003 0.875R (22.22) MAX. O 1.312 (33.32) 0.562 (14.27) 0.031 3/ 8 0.062 (1.57) - 32 UNEF 2A O 0.125 (3.18) MTG. FACE SERVO MOUNT: 100S... 0.031 0.010 1 0.562 0.800 (20.32) (14.27) 0.337 MIN. (8.56) 2 0.073 (1.85) 0.062 (1.57) 1 + 0.0000 3 CW SCHEMATIC 0.062 (1.57) - 0.0003 O 0.2497 (6.34) + 0.0000 - 0.0005 O 1.1875 O 1.312 (30.16) (33.32) MTG. O 1.312 (33.32) O 1.187 (30.15) MAX. 1 ADD 0.566 0.002 (14.38) FOR EACH ADDITIONAL SECTION TOLERANCES: UNLESS OTHERWISE NOTED. DECIMALS 0.005 ANGLES 2 MTG. FACE MECHANICAL SPECIFICATIONS PARAMETER Rotation Bearing Type Ganging Torque (Maximums) Servo, 1 Section Bushing, 1 Section Each Additional Section Mechanical Tolerances (Maximums): Shaft Runout (TIR/In) Pilot Dia. Runout (TIR) Lateral Runout (TIR) Shaft End Play Shaft Radial Play Moment of Inertia Weight Single Section Each Additional Section Document Number: 57034 Revision: 28-Jun-07 360 (continuous) Servo mount: Ball bearing Bushing mount: Sleeve bearing 6 sections maximum, terminal alignment, added sections, within 10 of section 1 terminals STARTING 0.60 oz. - in (43.20 g - cm) 1.00 oz. - in (72.00 g - cm) 0.30 oz. - in (21.60 g - cm) RUNNING 0.30 oz. - in (21.60 g - cm) 0.75 oz. - in (54.00 g - cm) 0.30 oz. - in (21.60 g - cm) BUSHING 0.002" (0.05 cm) 0.002" (0.05 cm) 0.005" (0.13 cm) 0.005" (0.13 cm) 0.004" (0.10 cm) SERVO 0.002" (0.05 cm) 0.002" (0.05 cm) 0.002" (0.05 cm) 0.005" (0.13 cm) 0.002" (0.05 cm) 1.0 g - cm2 per section maximum 2.0 oz. maximum (56.7 g) 0.75 oz. maximum (21.3 g) For technical questions, contact: sfer@vishay.com www.vishay.com 81 Model 100 1 5/16" (33.3 mm) Single Turn Wirewound Precision Potentiometer Vishay Spectrol MATERIAL SPECIFICATIONS ENVIRONMENTAL SPECIFICATIONS Housing and Lids Vibration Aluminum, anodized Stainless steel, non-magnetic non-passivated Shaft Terminals Brass, plated for solderability Bushing Mount Hardware Lockwasher Internal Tooth: Panel Nut: 15 g thru 2000 CPS Shock 50 g Salt Spray 96 h Rotational Life 1 million shaft revolutions Load Life Steel, nickel plated Brass, nickel plated 900 h Temperature Range - 55 C to + 105 C MARKING Unit Identification Units shall be marked with Vishay Spectrol name, model number and data code and on each section, resistance, resistance tolerance, linearity and terminal identification RATED POWER IN W POWER RATING CHART RESISTANCE ELEMENT DATA RESISTANCE VALUES () 4.0 3.5 RESOLUTION (%) 3.0 MAXIMUM MAXIMUM OHMS CURRENT VOLTAGE AT 70 C ACROSS PER COIL TURN AMBIENT (V) (mA) WIRE TEMP. COEF. (ppm/C) 2.5 5 0.346 0.017 742 3.7 800 2.0 10 0.298 0.030 524 5.2 800 1.5 20 0.236 0.047 371 7.4 800 1.0 50 0.244 0.122 235 12 20 0.5 100 0.222 0.222 166 17 20 200 0.181 0.361 117 23 20 500 0.178 0.885 74 37 20 1K 0.138 1.38 52 52 20 2K 0.105 2.09 37 74 20 5K 0.085 4.23 23 117 20 10K 0.069 6.84 17 166 20 20K 0.058 11.5 12 235 20 35K 0.058 20.0 8.8 310 20 0 25 50 75 100 AMBIENT TEMPERATURE IN C www.vishay.com 82 125 For technical questions, contact: sfer@vishay.com Document Number: 57034 Revision: 28-Jun-07 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1