Spectrum Analyzers 2395A 9 kHz to 26.5 GHz Spectrum Analyzer A spectrum analyzer with outstanding performance and a user friendly visual interface simplifying many complex measurements * 9 kHz to 26.5 GHz fully synthesized frequency range * Lightweight, portable and rugged construction at 12 kg (26.5 lbs) The 6.4 inch TFT color LCD in the 2395A provides a clear, bright, sharp display with a 640 x 480 pixel active display area viewable in high ambient light conditions. * Excellent TFT color display Comprehensive Marker System * Comprehensive marker facility * Wide input signal range +30 dBm to -110 dBm * Semi-automated measurements * USB 2.0 Interface * Extremely user friendly MMI reduces risk of operator error * Tune facility * GPIB as standard * AM/FM demodulation Color Display A "Value for Money" Product The 2395A is the latest in the range of spectrum analyzers from Aeroflex providing exceptional performance at an exceptional price. Frequency Accuracy The local oscillator system in the 2395A is fully synthesized thus providing accurate frequency measurements with 1 Hz resolution. Marker Table The marker system allows up to a maximum of 9 markers to be displayed on the screen at any one time. A marker table shows the frequency and level of each marker selected thus allowing multiple signals to be evaluated simultaneously. In addition to the Normal markers 2395A provides Delta, Peak Search, Peak Track, 1/Delta, Marker Track, Marker to Center, and Marker to Reference capabilities. Portability With a weight of only 12 kg (26.5 lbs) the 2395A is one of the lightest microwave spectrum analyzers available. A truly portable unit! Measurement Limits The Limits facility allows an Upper and/or a Lower Limit to be set on the screen of the 2395A. Should the signal being displayed fall For the very latest specifications visit www.aeroflex.com outside either limit a message will appear on the screen showing which limit has been exceeded and how many times this has happened. Wide Signal Measurement Range The 50 Ohm input on the 2395A can accept signals between +30 dBm and -110 dBm while providing protection to 50 VDC. Semi-Automated Measurements The MMI on the 2395A has been designed to simplify many of the measurements required for the evaluation of today's sophisticated communications systems. These include Adjacent Channel Power, X dB Down, Occupied Bandwidth, Channel Power and Harmonic Distortion. Tune Function Use of this function allows an unknown signal to be quickly captured and displayed on the screen. The 2395A will search its complete frequency range for the highest level signal, capture it, display it in the center of the screen with both the span and resolution bandwidths being automatically set to the optimal state for best viewing. X dB Down Spectral Purity The phase noise on the 2395A is specified at -90 dBc at 10 kHz offset which allows its use for evaluating the spectral purity and noise performance of systems and sub-systems. Signal Demodulation Demodulation of both AM and FM signals allows full testing on a wide range of communications systems. The demodulated signal can be viewed on the screen and is also available on the internal loudspeaker and on headphones via a connector on the front panel. The FM peak deviation and AM modulation depth can be measured using the markers provided in the 2395A. Occupied Bandwidth Information Storage The 2395A is provided with the capability of internally storing up to 1,000 screen traces and 2,000 operational states. The spectrum analyzer is also fitted with a USB 2.0 interface for download to bulk storage. Input Connector The 2395A input connector is a Planar Crown(R) adapter and both type N and PC 2.92 mm adapters are supplied. The PC 2.92 mm is required for operation to 26.5 GHz and input specifications are measured with this adapter fitted. The type N adapter can be used for operation up to 18 GHz or where low frequency operation in a type N cable system demands the appropriate connector. (R) Planar Crown is a trade mark of Weinschel Corporation. Interfaces IEEE 488-2, RS-232 and Printer (PCL5) interfaces are provided as standard on the 2395A allowing its integration into automated test systems and the print-out of screen displays. The 2395A has been designed with future flexibility and expansion in mind. The operating system and system memory has the capability to have additional facilities incorporated. Channel Power AMPLITUDE Measurement Range +30 dBm to -110 dBm DANL 50 kHz to 100 kHz <-105 dBm, typically -105 dBm 100 kHz to 2.8 GHz <-110 dBm, typically -110 dBm 2.8 GHz to 3.0 GHz <-95 dBm, typically -105 dBm 3.0 GHz to 13.2 GHz <-110 dBm, typically -115 dBm 13.2 GHz to 26.5 GHz <-100 dBm 300 Hz RBW, 10 Hz VBW 1 dB Compression Point >-10 dBm, 100 kHz to 26.5 GHz at 0 dB attenuation Displayed Range 100 dB in 10 dB/div log scale 50 dB in 5 dB/div log scale 20 dB in 2 dB/div log scale 10 dB in 1 dB/div log scale 10 divisions with linear amplitude scale Harmonic Distortion SPECIFICATION Amplitude Units FREQUENCY Log scale mode dBm and dBmV. Linear scale mode V (V, mV, etc.) or dBV (dBmV only). Quasi Peak mode dBV, dBmV or dBm Tuning Range Display Linearity 9 kHz to 26.5 GHz Range Band Mixing Mode 9 kHz to 3 GHz 0 1 2.9 to 6.4 GHz 1 1 6.3 to 13 GHz 2 2 12.9 to 26.5 GHz 3 4 Resolution 1 Hz Frequency Span Width 100 Hz/div to 2000 MHz/div in 1, 2, 5 step selections (auto-selected) Zero span and Full span (9 kHz to 26.5 GHz) Manual selection of Start, Stop and Span 5 and 10 dB/div, 0.1 dB/dB, 1.0 dB over 10 divisions 1 and 2 dB/div, 0.5 dB over 10 divisions Linear, 10 % of Reference Level over 10 divisions Frequency Response Flatness 9 kHz to 5 MHz -3 dB to +1 dB 5 MHz to 2.9 GHz 1.0 dB 2.9 GHz to 6.4 GHz <1.5 dB 6.4 GHz to 13.2 GHz <2.2 dB 13.2 GHz to 26.5 GHz <3.0 dB Measured with 10 dB of input attenuation at 23C 3C ATTENUATOR Span Accuracy <3% of indicated span width Readout Accuracy (Span Accuracy + Frequency Standard Accuracy + 50% of RBW) Range 0 dB to 55 dB in 5 dB steps selected manually or automatically coupled to the Reference Level Accuracy Stability Residual FM 100 x N Hz p-p at 1 kHz RBW, 1 kHz VBW (p-p in 200 ms) Noise Sidebands <-90 +20 LogN dBc/Hz where N is mixing mode shown in frequency table (previous page) 0.5 dB/step up to 1.0 dB maximum REFERENCE LEVEL Range -110 dBm to +30 dBm with 1 kHz filter using 1 dB/div scale Accuracy FREQUENCY COUNTER Resolution 1.0 dB (50 kHz to 26.5 GHz) Resolution 1 Hz, 10 Hz, 100 Hz and 1 kHz Accuracy 0.1 dB steps Residual Spurious (Reference frequency error + frequency readout accuracy + counter resolution 1 count) Sensitivity <-70 dBm from 50 kHz to 26.5 GHz For the very latest specifications visit -85 dBm (input terminated, 0 dB attenuation) Harmonic Distortion -60 dBc (-40 dBm input at 0 dB attenuation) www.aeroflex.com Intermodulation Distortion -70 dBc 100 MHz to 26.5 GHz -65 dBc 1 MHz to 100 MHz (at -30 dBm input, 0 dB input attenuation) Other Spurious Modes Normal, Delta, Peak Search, Peak Track, 1/Delta, Marker Track, Marker to Center, Marker to Reference, All Markers to peak Marker Marker Track, Marker to Center, Marker to Reference, Marker to Peak -60 dBc (10 MHz to 26.5 GHz at -30 dBm input) MEMORY RESOLUTION BANDWIDTH Trace storage Selection 300 Hz, 1 kHz, 3 kHz, 10 kHz, 30 kHz, 100 kHz, 300 kHz, 1 MHz, 3 MHz 9 kHz and 120 kHz (Quasi-Peak Detector Option) 100 Hz, 30 Hz, 10 Hz (Digital Resolution Bandwidth Option) Accuracy 20% Selectivity -60 dB/3 dB ratio <15:1 except 3 MHz filter 50 dB/3 dB ratio <15:1, 60 dB/6 dB ratio <12:1 for 9 kHz and 120 kHz Quasi Peak filters RBW Switching Error <1.0 dB referred to 3 kHz resolution bandwidth Video Bandwidth 1 Hz to 1 MHz in 1-3-10 sequence plus full BW Up to 1,000 stored traces stored internally Setup Storage Up to 2,000 operational states stored internally External USB 2.0 interface for bulk storage (USB 1.1 compatible) Display Traces 2 max INPUTS RF Input 50 Ohm Planar Crown(R) connector Supplied with Type (N) and PC 2.92 mm (f) adapters Input VSWR (9 kHz - 26.5 GHz) 1.5 : 1 with 10 dB Input Attenuation, with 2.92 mm female adapter Maximum Input SWEEP Rate (full screen) 20 ms to 1000 s in 1-2-5 sequence, 25 s to 100 s in Zero Span +30 dBm with 10 dB attenuation, 50 VDC LO Emissions -70 dBm with 0 dB attenuation Sweep Rate Accuracy <20% for <100 ms, 10 % for all other sweep rates Trigger Source External, Line, Video, Free run Trigger Modes Continuous, Single Trigger Level Internal Trigger: Adjustable over 10 divisions External Trigger (Rear): TTL Level Trigger Delay One sweep time DISPLAY Type 6.4 in. TFT Color LCD Digital Resolution 640 H x 480 V active display area MARKERS Number Up to 9 colored Markers available plus Delta Marker OUTPUTS IF Output 10.7 MHz nominal Video Output 0 to 5 VDC, VGA output Printer Drivers PCL5 compatible via standard 25 pin female D-Sub Parallel Printer Probe Power +15 V, -12 V and Ground Cal Signal 20 MHz, -20 dBm 0.3 dB from front panel BNC connector FREQUENCY STANDARD Frequency 10 MHz Output Level +5 dBm nominal Temperature Stability <2 ppm Aging Rate GENERAL CHARACTERISTICS <1 ppm/year DIMENSIONS Connector 350 mm (13.78 in.) W, 185 mm (7.28 in.) H, 395 mm (15.5 in.) D including handle BNC female Weight External Input -5 dBm to +15 dBm <12 kg/26.5 lbs (without options) Warm-up Time INTERFACES 15 minutes for specified accuracy GPIB Conforms to IEEE 488.1 - 1987, 488.2 - 1992 POWER REQUIREMENTS Voltage Subsets SH1, AH1, T6, L4, SR1, RL1, PP0, DC1, C0, LE0, TE0 90 to 250 VAC 10 % Frequency RS-232C 50-60 Hz Full Duplex Power Consumption Baud Rate 110 bps, 300 bps, 600 bps, 1200 bps, 2400 bps, 4800 bps, 9600 bps, 19.2 kbps, 38.4 kbps, 57.6 kbps, 115.2 kbps 100 W max without options fitted HARDWARE OPTIONS Parity Check Odd, Even or None High Stability Timebase (Option 03) Data Length 7 bit or 8 bit selectable Stop Bits Temperature Stability <0.2 ppm Ageing Rate 1 bit or 2 bit <0.1 ppm/year Protocol None, Xon-Xoff, RTS-CTS, DTR-DSR ENVIRONMENTAL Quasi-Peak Detector (Option 04) Quasi-Peak detector and EMC filters RBW Frequency Range Charge Time (ms) Discharge Time (ms) Display Time (ms) Operating 0 to 40C Storage -20 to +60C Temperature & Humidity Meets MIL-T-28800E for Type 2, Class 5, non-condensing (85% operating, 90 % storage) Vibration/Shock 9 kHz Band B 150 kHz to 30 MHz 1 20% 160 20% 160 20% 120 kHz Band C 30 MHz to 1 GHz 1 20% 550 20% 100 20% Digital Resolution Bandwidth Filters (Option 05) Bandwidths 100 Hz, 30 Hz, 10 Hz Meets MIL-T-28800E for Type 2, Class 5 Altitude Operational up to 3,000 meters, non-operational to 12,200 meters PRODUCT SAFETY Conforms to EN61010-1 for Class 1 portable equipment and is for use in a pollution degree 2 environment. The instrument is designed to operate from an Installation Category II. ELECTROMAGNETIC COMPATABILITY Complies with the limits specified in the following standard: EN61326 For the very latest specifications visit Bandwidth accuracy 20% Selectivity (-60 dB/-3 dB) <5:1 Maximum span 1 MHz Sweep times for 10 kHz span RBW 100 Hz <0.9 sec 30 Hz <3 sec 10 Hz <4.5 sec Displayed Average Noise Levels (DANL) between 1 MHz and 13 GHz reduces DANL by typically 5 dB from the values in the 300 Hz resolution bandwidth filter. www.aeroflex.com SOFTWARE OPTIONS VERSIONS, OPTIONS AND ACCESSORIES Option 12 - Marker Label Edit When ordering please quote the full ordering number information. This software option allows the user to change the marker label from the normal numeric format to a user defined 4-digit alpha-numeric label. Ordering Numbers Versions 2395A/0 9 kHz to 26.5 GHz Spectrum Analyzer Option 13 - EMC Options This software option, which must be used in conjunction with Option 04 (Quasi-peak detectors and filters) provides the user with some of the facilities required for EMC pre-compliance testing. Features include: Entry of correction factors for: Test Antenna Cable loss Transducer characteristics Addition of limit lines Choice of Log or Linear frequency scales Semi-automated operation of quasi-peak functions 03 High stability timebase 04 Quasi-peak detectors and filters 05 Digital resolution bandwidth filters 06 AC/DC power supply 12 Marker label edit software 13 EMC software Supplied Accessories Front cover Operation manual Programming manual AC supply lead RS-232 cable 2 x 250 V, 3.15 A fuses 3.5 mm (f) and type (N) Planar Crown(R) adapters 80010 Soft carry case Optional Accessories Maintenance manual AC2621 Rack mount kit AC5008 DC block N type 80010 Soft carry case For the very latest specifications visit www.aeroflex.com CHINA Beijing Tel: [+86] (10) 6539 1166 Fax: [+86] (10) 6539 1778 GERMANY Tel: [+49] 8131 2926-0 Fax: [+49] 8131 2926-130 SCANDINAVIA Tel: [+45] 9614 0045 Fax: [+45] 9614 0047 CHINA Shanghai Tel: [+86] (21) 5109 5128 Fax: [+86] (21) 5150 6112 HONG KONG Tel: [+852] 2832 7988 Fax: [+852] 2834 5364 SPAIN Tel: [+34] (91) 640 11 34 Fax: [+34] (91) 640 06 40 FINLAND Tel: [+358] (9) 2709 5541 Fax: [+358] (9) 804 2441 INDIA Tel: [+91] 80 5115 4501 Fax: [+91] 80 5115 4502 UK Burnham Tel: [+44] (0) 1628 604455 Fax: [+44] (0) 1628 662017 FRANCE Tel: [+33] 1 60 79 96 00 Fax: [+33] 1 60 77 69 22 KOREA Tel: [+82] (2) 3424 2719 Fax: [+82] (2) 3424 8620 UK Cambridge Tel: [+44] (0) 1763 262277 Fax: [+44] (0) 1763 285353 As we are always seeking to improve our products, the information in this document gives only a general indication of the product capacity, performance and suitability, none of which shall form part of any contract. We reserve the right to make design changes without notice. All trademarks are acknowledged. Parent company Aeroflex, Inc. (c)Aeroflex 2006. UK Stevenage Tel: [+44] (0) 1438 742200 Fax: [+44] (0) 1438 727601 Freephone: 0800 282388 USA Tel: [+1] (316) 522 4981 Fax: [+1] (316) 522 1360 Toll Free: 800 835 2352 w w w.aeroflex.com info-test@aeroflex.com Part No. 46891/149, Issue 5, 03/07