USA 858 674 8100
••
UK 44 1483 401 700
••
France 33 3 84 35 04 04
••
Singapore 65 6287 8998
••
Shanghai
86 21 54643211 / 2
••
China 86 769 5538070
••
Taiwan 886 3 4641811
www.pulseeng.com
76 SPM2006 (4/06)
In Circuit Operating Parameters 1
Package
Pulse 5Pulse 4,5 National Nominal Rated Max 2Nominal
THT Part SMT Part Part Inductance Current ETOP DCR Through Surface Lead
Number Number Number (µH) (ADC) (V-µSec) (Ω)Hole Mount Diameter
P0841 — LM267X-L41 22.8 4.9 23.3 .036 KM-3.0 — .035
P0845 — LM267X-L45 10.2 4.3 10.0 .026 KM-1.1 — .031
P0846 — LM267X-L46 14.8 5.0 17.0 .023 KM-2.1 — .035
P0847 — LM267X-L47 10 5.0 13.0 .025 KM-2.0 — .031
P0848 — LM267X-L48 50 5.0 40.0 .050 KM-4.0 — .039
P0849 — LM267X-L49 33 5.0 36.0 .047 KM-4.0 — .035
P0850 — LM267X-L50 23 5.0 24.0 .026 KM-3.0 — .043
—P0841S LM267X-L41 22.8 4.9 23.3 .036 — HCI-68
—P0845S LM267X-L45 10 4.3 10.0 .050 — LCI-44
—P0846S LM267X-L46 15 5.0 17.0 .027 — LCI-50
—P0847S LM267X-L47 11 5.0 13.0 .025 — LCI-50
—P0848S LM267X-L48 52 65.0 40.0 .025 — Bigfoot
—P0849S LM267X-L49 36 65.0 36.0 .019 — Bigfoot
—P0850S LM267X-L50 24.7 65.0 24.0 .013 — Bigfoot
Electrical Specifications @ 25°C— Operating Temperature -40°C to +130°C 7
Tested and recommended by National
Semiconductor for the LM267X series
Base material meets flammability
requirements of UL 94V-0
Available in surface mount and through
hole versions
PKG A B C D E
KM-1.1 .350 .580 .715 .290 .110
8,89 14,74 18,17 7,37 2,80
KM-2.0 .450 .650 .700 .325 .150
11,43 21,08 17,78 8,26 3,81
KM-2.1 .460 .670 .750 .335 .150
11,69 17,02 19,05 8,51 3,81
KM-3.0 .450 .830 .950 .415 .150
11,43 21,09 24,13 10,55 3,81
KM-4.0 .600 .950 1.350 .475 .225
15,24 24,13 34,29 12,07 5,72
KlipMount™
Series
Dimensions: Inches
mm
Unless otherwise specified, all tolerances are ± .010
0,25
THT/SMT POWER INDUCTORS
Toroid - Designed for National’s 260kHz
Simple Switcher
™
Notes :
1. Inductance values may vary ±20%.
2. ETop rated at 260kHz.
3. SIMPLE SWITCHER™ is a trademark of National Semiconductor Corporation.
4. For SMT parts, optional Tape & Reel packaging can be ordered by adding a
"T" suffix to the part number (i.e. P0841S becomes P0841ST). Pulse complies
to industry standard tape and reel specification EIA481.
5. To order RoHS compliant part, add the suffix "NL" to the part number
(i.e. P0841 becomes P0841NL and P0841T becomes P0841NLT).
6. Series connection (pins 2-4 connected)
7. The temperature of the component (ambient plus temperature rise)
must be within the stated operating temperature range.