PDTC123Y series NPN resistor-equipped transistors; R1 = 2.2 k, R2 = 10 k Rev. 03 -- 24 March 2005 Product data sheet 1. Product profile 1.1 General description NPN Resistor-Equipped Transistors (RET) family. Table 1: Product overview Type number Package PNP complement Philips JEITA JEDEC PDTC123YE SOT416 SC-75 - PDTA123YE PDTC123YK SOT346 SC-59A TO-236 PDTA123YK PDTC123YM SOT883 SC-101 - PDTA123YM PDTC123YS [1] SOT54 SC-43A TO-92 PDTA123YS PDTC123YT SOT23 - TO-236AB PDTA123YT PDTC123YU SOT323 SC-70 - PDTA123YU [1] Also available in SOT54A and SOT54 variant packages (see Section 2). 1.2 Features Built-in bias resistors Simplifies circuit design Reduces component count Reduces pick and place costs 1.3 Applications General-purpose switching and amplification Inverter and interface circuits Circuit drivers 1.4 Quick reference data Table 2: Quick reference data Symbol Parameter Conditions Min Typ Max Unit VCEO collector-emitter voltage open base - - 50 V IO output current (DC) - - 100 mA R1 bias resistor 1 (input) 1.54 2.2 2.86 k R2/R1 bias resistor ratio 3.6 4.5 5.5 PDTC123Y series Philips Semiconductors NPN resistor-equipped transistors; R1 = 2.2 k, R2 = 10 k 2. Pinning information Table 3: Pinning Pin Description Simplified outline Symbol SOT54 1 input (base) 2 output (collector) 3 2 R1 GND (emitter) 1 2 3 1 R2 001aab347 3 006aaa145 SOT54A 1 input (base) 2 output (collector) 3 2 R1 GND (emitter) 1 2 1 R2 3 001aab348 3 006aaa145 SOT54 variant 1 input (base) 2 output (collector) 3 2 R1 GND (emitter) 1 2 3 1 R2 001aab447 3 006aaa145 SOT23; SOT323; SOT346; SOT416 1 input (base) 2 GND (emitter) 3 3 3 R1 output (collector) 1 R2 1 2 2 006aaa144 sym007 SOT883 1 input (base) 2 GND (emitter) 3 output (collector) 1 3 3 2 R1 1 Transparent top view R2 2 sym007 9397 750 14017 Product data sheet (c) Koninklijke Philips Electronics N.V. 2005. All rights reserved. Rev. 03 -- 24 March 2005 2 of 11 PDTC123Y series Philips Semiconductors NPN resistor-equipped transistors; R1 = 2.2 k, R2 = 10 k 3. Ordering information Table 4: Ordering information Type number Package Name Description Version PDTC123YE SC-75 plastic surface mounted package; 3 leads SOT416 PDTC123YK SC-59A plastic surface mounted package; 3 leads SOT346 PDTC123YM SC-101 leadless ultra small plastic package; 3 solder lands; body 1.0 x 0.6 x 0.5 mm SOT883 PDTC123YS [1] SC-43A plastic single-ended leaded (through hole) package; 3 leads SOT54 PDTC123YT - plastic surface mounted package; 3 leads SOT23 PDTC123YU SC-70 plastic surface mounted package; 3 leads SOT323 [1] Also available in SOT54A and SOT54 variant packages (see Section 2 and Section 9). 4. Marking Table 5: Marking codes Type number Marking code [1] PDTC123YE 19 PDTC123YK 31 PDTC123YM G7 PDTC123YS TC123Y PDTC123YT *AL PDTC123YU *19 [1] * = -: made in Hong Kong * = p: made in Hong Kong * = t: made in Malaysia * = W: made in China 9397 750 14017 Product data sheet (c) Koninklijke Philips Electronics N.V. 2005. All rights reserved. Rev. 03 -- 24 March 2005 3 of 11 PDTC123Y series Philips Semiconductors NPN resistor-equipped transistors; R1 = 2.2 k, R2 = 10 k 5. Limiting values Table 6: Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Symbol Parameter Conditions Min Max Unit VCBO collector-base voltage open emitter - 50 V VCEO collector-emitter voltage open base - 50 V VEBO emitter-base voltage open collector - 5 V VI input voltage positive - +12 V negative - -5 V - 100 mA - 100 mA IO output current (DC) ICM peak collector current single pulse; tp 1ms Ptot total power dissipation Tamb 25 C SOT416 [1] - 150 mW SOT346 [1] - 250 mW SOT883 [2] [3] - 250 mW SOT54 [1] - 500 mW SOT23 [1] - 250 mW SOT323 [1] - 200 mW -65 +150 C Tstg storage temperature Tj junction temperature - 150 C Tamb ambient temperature -65 +150 C [1] Device mounted on an FR4 Printed-Circuit Board (PCB), single-sided copper, tin-plated and standard footprint. [2] Reflow soldering is the only recommended soldering method. [3] Device mounted on an FR4 PCB with 60 m copper strip line, standard footprint. 6. Thermal characteristics Table 7: Thermal characteristics Symbol Parameter Conditions Rth(j-a) thermal resistance from junction to ambient in free air Typ Max Unit SOT416 [1] - - 833 K/W SOT346 [1] - - 500 K/W SOT883 [2] [3] - - 500 K/W SOT54 [1] - - 250 K/W SOT23 [1] - - 500 K/W SOT323 [1] - - 625 K/W [1] Device mounted on an FR4 PCB, single-sided copper, tin-plated and standard footprint. [2] Reflow soldering is the only recommended soldering method. [3] Device mounted on an FR4 PCB with 60 m copper strip line, standard footprint. 9397 750 14017 Product data sheet Min (c) Koninklijke Philips Electronics N.V. 2005. All rights reserved. Rev. 03 -- 24 March 2005 4 of 11 PDTC123Y series Philips Semiconductors NPN resistor-equipped transistors; R1 = 2.2 k, R2 = 10 k 7. Characteristics Table 8: Characteristics Tamb = 25 C unless otherwise specified. Symbol Parameter Conditions Min Typ Max Unit ICBO collector-base cut-off current VCB = 50 V; IE = 0 A - - 100 nA ICEO collector-emitter cut-off current VCE = 30 V; IB = 0 A - - 1 A VCE = 30 V; IB = 0 A; Tj = 150 C - - 50 A A IEBO emitter-base cut-off current VEB = 5 V; IC = 0 A - - 700 hFE DC current gain VCE = 5 V; IC = 5 mA 35 - - VCEsat collector-emitter saturation voltage IC =10 mA; IB = 0.5 mA - - 150 mV VI(off) off-state input voltage VCE = 5 V; IC = 100 A - 0.75 0.3 V VI(on) on-state input voltage VCE = 300 mV; IC = 20 mA 2.5 1.15 - V R1 bias resistor 1 (input) 1.54 2.2 2.86 k R2/R1 bias resistor ratio 3.6 4.5 5.5 Cc collector capacitance - - 2 VCB = 10 V; IE = ie = 0 A; f = 1 MHz 9397 750 14017 Product data sheet pF (c) Koninklijke Philips Electronics N.V. 2005. All rights reserved. Rev. 03 -- 24 March 2005 5 of 11 PDTC123Y series Philips Semiconductors NPN resistor-equipped transistors; R1 = 2.2 k, R2 = 10 k 006aaa095 103 hFE (2) (1) 006aaa096 1 VCEsat (V) (3) 102 10-1 (1) (2) 10 (3) 1 10-1 1 102 10 10-2 1 102 10 IC (mA) I C (mA) VCE = 5 V IC/IB = 20 (1) Tamb = 100 C (1) Tamb = 100 C (2) Tamb = 25 C (2) Tamb = 25 C (3) Tamb = -40 C (3) Tamb = -40 C Fig 1. DC current gain as a function of collector current; typical values 006aaa097 10 Fig 2. Collector-emitter saturation voltage as a function of collector current; typical values 006aaa098 10 VI(off) (V) VI(on) (V) (1) 1 (1) 1 (2) (2) (3) (3) 10-1 10-1 1 102 10 10-1 10-1 IC (mA) 10 IC (mA) VCE = 0.3 V VCE = 5 V (1) Tamb = -40 C (1) Tamb = -40 C (2) Tamb = 25 C (2) Tamb = 25 C (3) Tamb = 100 C (3) Tamb = 100 C Fig 3. On-state input voltage as a function of collector current; typical values Fig 4. Off-state input voltage as a function of collector current; typical values 9397 750 14017 Product data sheet 1 (c) Koninklijke Philips Electronics N.V. 2005. All rights reserved. Rev. 03 -- 24 March 2005 6 of 11 PDTC123Y series Philips Semiconductors NPN resistor-equipped transistors; R1 = 2.2 k, R2 = 10 k 8. Package outline 3 3 0.45 0.15 0.6 0.2 3.0 1.7 2.5 1.3 1.75 0.9 1.45 0.7 1 2 1 0.30 0.15 2 0.25 0.10 Dimensions in mm 04-11-04 Fig 5. Package outline SOT416 (SC-75) 0.62 0.55 0.55 0.47 0.50 0.35 1.9 1 0.26 0.10 Dimensions in mm 04-11-11 Fig 6. Package outline SOT346 (SC-59A/TO-236) 0.50 0.46 0.45 0.38 4.2 3.6 3 0.30 0.22 2 0.48 0.40 1.02 0.95 0.65 0.30 0.22 1.3 1.0 3.1 2.7 0.95 0.60 1.8 1.4 1 2 4.8 4.4 1 0.20 0.12 2.54 3 5.2 5.0 0.35 Dimensions in mm 03-04-03 Fig 7. Package outline SOT883 (SC-101) 14.5 12.7 Dimensions in mm 04-11-16 Fig 8. Package outline SOT54 (SC-43A/TO-92) 0.45 0.38 0.45 0.38 4.2 3.6 1.27 4.2 3.6 1.27 0.48 0.40 3 max 1 2.5 max 0.48 0.40 1 2 4.8 4.4 5.08 2.54 2 4.8 4.4 2.54 3 1.27 3 5.2 5.0 5.2 5.0 14.5 12.7 Dimensions in mm Fig 9. Package outline SOT54A 04-06-28 Dimensions in mm 05-01-10 Fig 10. Package outline SOT54 variant 9397 750 14017 Product data sheet 14.5 12.7 (c) Koninklijke Philips Electronics N.V. 2005. All rights reserved. Rev. 03 -- 24 March 2005 7 of 11 PDTC123Y series Philips Semiconductors NPN resistor-equipped transistors; R1 = 2.2 k, R2 = 10 k 3.0 2.8 1.1 0.9 2.2 1.8 1.1 0.8 0.45 0.15 3 3 0.45 0.15 2.5 1.4 2.1 1.2 2.2 1.35 2.0 1.15 1 1 2 1.9 0.48 0.38 2 0.4 0.3 0.15 0.09 Dimensions in mm 1.3 04-11-04 Fig 11. Package outline SOT23 (TO-236AB) 0.25 0.10 Dimensions in mm 04-11-04 Fig 12. Package outline SOT323 (SC-70) 9. Packing information Table 9: Packing methods The indicated -xxx are the last three digits of the 12NC ordering code. [1] Type number Package Description Packing quantity 3000 5000 10000 PDTC123YE SOT416 4 mm pitch, 8 mm tape and reel -115 - -135 PDTC123YK SOT346 4 mm pitch, 8 mm tape and reel -115 - -135 PDTC123YM SOT883 2 mm pitch, 8 mm tape and reel - - -315 PDTC123YS SOT54 bulk, straight leads - -412 - SOT54A tape and reel, wide pitch - - -116 tape ammopack, wide pitch - - -126 SOT54 variant bulk, delta pinning - -112 - PDTC123YT SOT23 4 mm pitch, 8 mm tape and reel -215 - -235 PDTC123YU SOT323 4 mm pitch, 8 mm tape and reel -115 - -135 [1] For further information and the availability of packing methods, see Section 14. 9397 750 14017 Product data sheet (c) Koninklijke Philips Electronics N.V. 2005. All rights reserved. Rev. 03 -- 24 March 2005 8 of 11 PDTC123Y series Philips Semiconductors NPN resistor-equipped transistors; R1 = 2.2 k, R2 = 10 k 10. Revision history Table 10: Revision history Document ID Release date Data sheet status Change notice Doc. number Supersedes PDTC123Y_SER_3 20050324 Product data sheet - 9397 750 14017 PDTC123YT_2 Modifications: * The types PDTC123YE, PDTC123YK, PDTC123YM, PDTC123YS and PDTC123YU were added. * * * * * Table 1 "Product overview" added Table 8 "Characteristics" Vi(on) redefined to VI(on) on-state input voltage Table 8 "Characteristics" Vi(off) redefined to VI(off) off-state input voltage Figure 1, 2, 3 and 4 added Section 9 "Packing information" added PDTC123YT_2 20040510 Objective data sheet - 9397 750 13208 PDTC123YT_1 PDTC123YT_1 20040406 Objective data sheet - 9397 750 12555 - 9397 750 14017 Product data sheet (c) Koninklijke Philips Electronics N.V. 2005. All rights reserved. Rev. 03 -- 24 March 2005 9 of 11 PDTC123Y series Philips Semiconductors NPN resistor-equipped transistors; R1 = 2.2 k, R2 = 10 k 11. Data sheet status Level Data sheet status [1] Product status [2] [3] Definition I Objective data Development This data sheet contains data from the objective specification for product development. Philips Semiconductors reserves the right to change the specification in any manner without notice. II Preliminary data Qualification This data sheet contains data from the preliminary specification. Supplementary data will be published at a later date. Philips Semiconductors reserves the right to change the specification without notice, in order to improve the design and supply the best possible product. III Product data Production This data sheet contains data from the product specification. Philips Semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. Relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). [1] Please consult the most recently issued data sheet before initiating or completing a design. [2] The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com. [3] For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status. 12. Definitions 13. Disclaimers Short-form specification -- The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Life support -- These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Limiting values definition -- Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information -- Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Right to make changes -- Philips Semiconductors reserves the right to make changes in the products - including circuits, standard cells, and/or software - described or contained herein in order to improve design and/or performance. When the product is in full production (status `Production'), relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. 14. Contact information For additional information, please visit: http://www.semiconductors.philips.com For sales office addresses, send an email to: sales.addresses@www.semiconductors.philips.com 9397 750 14017 Product data sheet (c) Koninklijke Philips Electronics N.V. 2005. All rights reserved. Rev. 03 -- 24 March 2005 10 of 11 PDTC123Y series Philips Semiconductors NPN resistor-equipped transistors; R1 = 2.2 k, R2 = 10 k 15. Contents 1 1.1 1.2 1.3 1.4 2 3 4 5 6 7 8 9 10 11 12 13 14 Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . 1 General description. . . . . . . . . . . . . . . . . . . . . . 1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Quick reference data. . . . . . . . . . . . . . . . . . . . . 1 Pinning information . . . . . . . . . . . . . . . . . . . . . . 2 Ordering information . . . . . . . . . . . . . . . . . . . . . 3 Marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 4 Thermal characteristics. . . . . . . . . . . . . . . . . . . 4 Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Package outline . . . . . . . . . . . . . . . . . . . . . . . . . 7 Packing information. . . . . . . . . . . . . . . . . . . . . . 8 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . 9 Data sheet status . . . . . . . . . . . . . . . . . . . . . . . 10 Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Contact information . . . . . . . . . . . . . . . . . . . . 10 (c) Koninklijke Philips Electronics N.V. 2005 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Date of release: 24 March 2005 Document number: 9397 750 14017 Published in The Netherlands