CONTENT Specifications e Connectors according to: MIL C24308 - NFC93425 - HE507 Hybrid DSub series Materials and platings Electrical Data Shells Steel-Tin plating | Current rating Insulators High temperature black thermoplastic | Signal contacts 7.5 A. with 10 A. peaks Signal contacts Female: machined bronze | Power contacts Material Male: machined brass ee ferminations i 0 i e a Fini NF mi older cup terminations 040A. Plating finish Oy Au over 79y Ni min. Crimp prinations 101040 A, Or S0H"AL over 73u! Nimin. | Shielded contacts 05A Shielded contacts Female: machined bronze Voltage rating mais Male: machined brass Signal and power contacts 300 V.R.M-S. at 50 Hz Plating . sy, { Shielded contacts 150 V.RMS. at 50 Hz Inner conductor 16 Au or 30m Au over 79u Ni Shielded contacts Outer ring 10u Au over 79 Ni fe e ov, on 0-1 GHz Terminations Tinned hiesuati, rang 0.2dB Except solder cup and crimp terminations gold flash V SWE 14(400 4GHz) Power contacts Female: machined bronze | Characteristic impedance "B90 Ohms Material Male: machined brass | .. . . Bieta votage ces so VRMS. 60H Toniigtens "6 AU or 30p Au over le Insulation resistance 25000 M Ohms at 500 VDC Except solder cup and crimp terminations gold flash | Contact resistance < 5m Ohms Brackets Steel-Tin plating | Shell resistance < 1m Ohm Front jackscrews Brass-Tin plating (electrical grounding) Rear clinch nuts Brass-Tin plating Boardlocks Bronze-Tin plating Stand-off Brass-Tin plating Climatic Data Mechanical data Operating temperature -55C + 155C | Shells With or without dimples (with peaks up to 180C) | Contact retention force in dielectric material > 40N Damp heat 56 days (40C - 95% HR) | Maximum mating and unmating force Salt spray 48 hours | with dimples E size = 70 N Asize = 80 N B size = 100 N C size = 150 N D size = 180 N Without dimples E size =30N Asize=50N B size = 80 N C size = 120 N D size = 160 N Compatible with process IR - Air convectioned 260 for 20 s. Resistance to solder iron heat 260C for 30 s. Mating cycles 2 200 (classe Il) or 500 (classe !) Blind mating system Available upon request Polarization Available with locking accessories Consult factory DESCRIPTION APPLICATIONS Amphenol DSub TW Hybrid Series permits a mix of contacts including signal, power, shielded, high voltage and fiber optics in the same housing with 18 different contacts arrangements. This economic series was fist developed from our military series, and has improved features: - new contacts - new high temperature black thermoplastic insert - PCB configurations come preloaded with fixed contacts and brackets. These connectors are supplied with screw machined contacts which are fixed in the insulator. Acomplete range of housings are also available for cable application. A full range of anangements compatrhle wath refLow procen * Commercial Medical * Industrial * Telecom Any application requiring optimization of space TW/E1 Cea aii AmphenolTECHNICAL DATA Shell and contacts plating CLASS Il CLASS | 0.4ym (16u) Au contacts gold plating 0.76ym (30y) Au contacts gold plating 200 mating cycles 500 mating cycles Types Shells and plating Types Shells and plating Tin plated shell Tin plated shell m7 TW *Male and female aw *Male and female 717 TW Tin plated shell with dimples 777 TW Tin plated shell with dimples Male only Male only Housing arrangements Male front view ee e.8 (webs Arrangement...... 5W1 7W2 Wt Shell size ............ E A A Se @ 082 ( ee Arrangement ...... 3W3 * 9Ww4 Shell size ............ A B (662256) 60258 (are @eoces) Arrangement ...... 13W3 17W2 211 Shell size wo... B B B (6 erresccees 6) | (PECTS SS) | (CCA ESS) Arrangement ...... 27W2 13W6 17W5 Shell size ............ Cc Cc Cc (6 eS Sa e 6) (6 eS @ @ @ FE) ) 6 bia | Arrangement ...... 21W4 8W8 25W3 Shell size ............ Cc Cc Cc (deeded e | \s 6 6 688220586 | | se e Arrangement ...... 24W7 36W4 43W2 - Shell size ............ D D D @ 2 C4Shell size dimensions . 15-F J Hy 10 "09 cn 031 \ Jel Sho: (Conlact| A || B | BY) Ch (eo ES ee ie. S size ge, +0.25 Bees a 0.10 ies +0.25/0 +0.20 te ont aes 0.10 yes ioe (.010) | (Ol-.008) | (+.008/0) | (4.004) | (O/-.010) | (+.010/0) | (+.008) _|(+.002/-.008) |(+.004/-.008)] +.004/-.008)| (4.004) _|(+.004/-.016)| _(0/-.020) 5 16.8 8.2 10.9 5.9 7 30.7 (.661) | 25.0 (323")| 124 (429) (232")| 19.4 | 11.0 g_ |('-209)| 164 (.984) | 8.0 (.488") | 41.1 6.2 (.764") | (.433") (.646) (315") (437) (.244) p 25.1 8.2 10.9 59 39.0 (.988") | 33.3 (.323)| 12.4 (429) (.232")| 27.7 | 11.0 A g _|(1.535")| 248 (1.311) 8.0 (.488") 41.1 6.2 (1.091")| (.433) (.976") (.315") (437) (244) p 38.8 8.2 11.0 58 52.9 (1.528)| 47.0 (.323")| 124 (433") (228")| 41.4 | 11.0 B g __|(2.083")| 385 (1.850")| 8.0 (.488") | 41.1 6.2 (1.630"} (.433") (1.513") (315) (437) (244) p 55.3 82 11.0 58 69.2 (2.177")| 63.5 (.323")} 12.4 (.433") (.228")} 57.9 | 11.0 C g (| (2.724")| 549 (2.500")| 8.0 (488) | 41.4 6.2 (2.280") (.433) (2.161) (315) (437) (.244") fi 52.7 11.0 11.0 58 66.8 (2.075")| 64.1 (.433")} 15.2 (433) (.228)| 555 | 13.8 D g _|(2.630")] 525 (2.406")| 10.9 (.598") | 41.1 6.2 (2.185")| (.543) (2.067) (429") (437) (.244) Panel cutouts Optimal cutout for rear mounting Standard cutout Shell |Mounting) A B C D E F G H J size metho fen) ceans) 008) 08) 008) 008) 008) (008) toe) 22.2 11.1 13.0 21 Front | (874%) | (437) 25.0 12.5 | (512") | (.256) 3.0 1.5 (.083) E 205 10.2 | (.984) | (492) |" 114 57 118") | (.059") 34 Rear | (go7") | (402") (449) | (.224) (.0134) 305 15.3 13.0 6.5 21 Front | 1.201") | 602" 33.3 16.7 | (.512") | (.256) 3.0 15 (.083") A 28.8 44] (1.311) | (657) | 114 57 (.118") | (.059") 34 Rear | (1134) | (567) (449") | (.224) (.0134") 443 22.1 13.0 65 21 Front | (4.744) | (870) | 47.0 235 | (512") | (.256") 3.0 15 (.083") e 425 213 | (1.850") | (925) | 114 Wi (118") | (.059") 34 Rear | (1.673') | (.839") (.449") | (.224") (.0134") 60.7 304 73.0 65 21 Front} 2.390") | (1.197) | 635 31.7 | (512") | (.256") 3.0 15 (.083") re} c 59.1 295 | (2.500) | (4.248) | 114 57 (118") | (.059) 34 Rear " " (2.327") | (1.161) (449) | (.224) (.0134") @ i 58.3 | 292 68 | 79 21 ror Front | (2.2957) | (1.150) | 611 | 306 | (622 | (31) | 30 1.5 |_ (083!) = D 56.3 28.2 | (2.406") | (1.205") | 147 71 (118) | (.059") 34 4 Rear | (2217) | (1.110) (.555") | (.280") (.0134) TECHNICAL DATA TW/E1TECHNICAL DATA Straight connector footprint y tf Signal tail 0.6 mm Dia. (.0236) 1.6 mm (.063)PCB For other PCB thickness: consult factory. Dimensions Description a b a 4.80 mm 7.2mm Power (.126 tail dia. 1 ( ) (.198) (.283) i 4.80 mm 7.2mm Power (.0787 tail dia. 1 ( ) (.198) (.283) ; 4.00 mm 7.2 mm Shielded 3 (.157) (.283) Signal 9 5.00 mm 11.50 mm (.196) (.453) Straight contact combinations Arrangement with signal contacts Arrangement without signal contacts 3W3 - SW5 - SW3 See above dimensions Size 8 and 20 Contacts See above dimensions Size 8 Contacts P 3SY Power 3.2 mm DIA. (.126) Power only (20 to 40 A) and signal P 3Y 3.2 mm DIA. (.126) (20 to 40 A) Power 2 mm DIA. (.0787) P2sy (10 to 20 A) and signal Power only P2yY 2 mm DIA. (.0787") cSY Shielded and signal (tO tae) ) f Signal only CY Shielded only E Signal (Size 20) cP) No reference with solder cup terminations ri eo Housing preloaded with contacts rs |Right angle connector footprint a Signal tail 0.6 mm Dia. (.0236) : 1 8 mm (.083") PCB Europe Mix MIL For other PCB thickness: consult factory. | HE 5 pattern = Mixed pattern = MIL pattern = - Europ. height - MIL height - MIL height - Europ. footprint | - Furop. ootprint | - MIL footprint pitch between pitch between pitch between 2 rows: .100 2 rows: .100 2 rows: .112 Description a b c a b C a b C : 10.30mm) 6.30mm |10.00mm/ 10.30mm| 6.30mm | 10.00mm Shielded (406") | (248) | (394") ] (406) | (248) | (394 Signal 9 10.30mm} 7.20mm | 11.20mm}10.30mm) 6.30mm | 9.50mm | 8.10mm | 6.30mm | 9.50mm gna (406") | (.283") | (441) | 406") | (.248") } (.374") | (319) } (.248") | (:374) Day op 11.57mm| 7.20mm |10.50mm)11.57mm} 6.30mm | 9.50mm | 9.52mm | 6.30mm| 9.50mm Power (.0787" tail dia.) 3 | (4567) | (283) | (413) | (456) | (248) | (374) | (3757) | (248) | 374 p 426" tail di 3 21.46mm| 7.20mm }10.50mm)21.46mm] 6.30mm | 9.50mm |21.46mm| 6.30mm | 9.50mm ower (. ail dia.) (.845") | (.283") | (443) | (.845") | (.248") | (.374") | (.845") | (.248") | (.374") Arrangement with signal contacts Note: above dimensions correpond to sizes E to C. Consult factory for D sizes. Connector comes equiped with contacts and brackets. Right angle contacts combinations 3W3 - SW5 - 8W8 Arrangement without signal contacts 2 eo: S 4 European Mixed MIL (U.S.) Size 8 and European Mixed MIL (U.S.) Size 8 contacts footprint | footprint footprint 20 Contacts footprint footprint footprint only Power 3.2 mm Power only EP3SV HP3SV MP3SV DIA. (.126) (20 to EP3V HP3V MP3V 3.2 mm DIA. (.126) 40 A) and signal (20 to 40 A) Power 2mm Power only EP2SV HP2SV MP2SV | DIA. (.0787) (10 to EP2V HP2V MP2V = |2.0 mm DIA. (.0787) 20 A) and signal (10 to 20 A) | - | Hesv | Mcsv | Shielded and signal | | HCV Mcv | Shielded only _| [ esv [| sv | Msv | Signalony | TECHNICAL DATA TW/E1TECHNICAL DATA Mounting options Right angle version Connectors come equiped with metal brackets BLANK: 3.10mm (.122) dia mounting hole RM6: metal brackets + boardlock eI Metal bracket RM6 Straight version BLANK: 3.10mm (.122) dia mounting hole 1.5 max. A514: blind mating system RM54: RM5 4.40 threaded RM53: RM5 M3 threaded 7.2 (.283) RM84: RM8 4.40 threaded RM83: RM8 M3 threaded FM: float mounting system + 0.25 CG (.118) 03 62.2 (.086) 3.6 max. (.144 max.) Straight and right angle version 4R: 4.40 rear nut 3R: M3 rear nut 4F: 4.40 front female screwlock 3F: M3 front female screwlock re) = o = om = = High power contacts TECHNICAL DATA 5.20 Solder cup version Fe A E < 22 7 (866 olf Lt Dimensions Plug Socket ceteet A mm (inch) B mm (inch) L 17DM 53745-8 L 17DM 53744-7 10 to 20 Amp. 1.80 (.071) 2.55 (.100) L 17DM 53745-7 L 17DM 53744-6 | 20t030Amp. | 2.80 (.110) 3.70 (.145) L 17DM 53745-1 L 17DM 53744-1 30 to 40 Amp. 4.80 (.189) 5.60 (.220) Trim dimensions: 7.5 mm (.295) Crimp version 0B 22 / 2B Is assy 4) || e069 1" pil a (an Ore P/N Dimensions Plug Socket Amam (inch) B mm (inch) L 17DM 53745-208 | L17DM 53744-207 10 to 20 Amp. 1.80 (.071) 2.55 (.100) L 17DM 53745-207 L 17DM 53744-206 20 to 30 Amp. 2.80 (.110) 3.70 (.145) L 17DM 53745-2041 L 17DM 53744-2011 30 to 40 Amp. 4.80 (.189) 5.60 (.220) Trim dimensions: 7.5 mm (.295) Crimping tool for all sizes L17D479SP Extraction tool for sizes 8 cts TW/E1TECHNICAL DATA Straight shielded contacts Crimp ferrule and inner solder @D | | Type P/N Dimensions (inch) Cable - RG Trim dimensions (inch) A Max B D E E G plug L17DM 53740 | 18.8 (740) | 23.6 (.929")| 1.0 (.039) 178 B/U 9 (.311) | 6.3 (.248) | 2 (.078") plug | Li7DM 53740-1 | 18.8 (740) | 23.6 (.929)| 1.7 (.066) 479 B/U 346 B/U) 7.9 (.311) | 6.3 (.248) | 2 (.078) plug | Li7DM 53740-3 | 21.5 (846) | 23.6 (.929") | 2.8 (.110) 180 B/U 5 (.374)| 7.9 (.311) | 2 (.078) | plug | Li7DM 53740-5 | 21.5 (846) | 23.6 (.929) | 3.2 (.126") 58 C/U 9 (.374") | 7.9 (.311) | 2 (.078) socket | Li7DM 53742 | 18.8 (740) | 23.6 (.929)| 1.0 (.039) 178 B/U 7.9 (.311) ) 6.3 (.248) | 2 (.078) socket | L17DM 53742-1 | 18.8 (740) | 23.6 (.929)| 1.7 (.066) }479 B/U 316 B/U| 7.9 (.311)| 6.3 (.248)| 2 (.078) socket | L17DM 53742-3 | 21.5 (846) | 23.6 (.929) | 2.8 (.110) 180 B/U 5 (.374) | 7.9 (.311) | 2 (.078") socket | L17DM 53742-5 | 21.5 (846) | 23.6 (.929) | 3.2 (.126) 58 C/U 5 (.374") | 7.9 (.311") | 2 (.078) Ferrule and inner solder )) ) jit I Type P/N Dimensions (inch) Cable -RG | Trim dimensions (inch) A Max B D E F G short plug|L17DM 53740-5000 | 17.0 (669) | 21.8 (.858) | 1.0 (.039) 178 BIU 9 (.311) | 6.3 (.248")| 2 (.078) plug |L17DM 53740-5001 | 18.8 (740") | 23.6 (.929) | 1.7 (.066)|179 B/U 316 B/U| 7.9 (.311) | 6.3 (.248)| 2 (.078) plug |L17DM 53740-5002 |21.5 (846) |26.3 (1.035)| 2.8 (.110) 180 B/U 5 (.374)| 7.9 (.311")| 2 (.078") plug |L17DM 53740-5005 | 21.5 (846) 26.3 (1.035), 3.2 (.126) 58 C/U 5 (.374) | 7.9 (.311)| 2 (.078) plug |L17DM 53740-5008 | 18.8 (740) | 23.6 (.929) | 1.0 (.039) 178 BIU 9 (.311) | 6.3 (.248)| 2 (.078") short socket |L17DM 53742-5000 | 17.0 (669) | 21.8 (.858) | 1.0 (.039) 178 BIU 7.9 (.311") | 6.3 (.248")| 2 (.078) socket_|L17DM 53742-5004 | 18.8 (740") | 23.6 (.929) | 1.7 (.066")|179 B/U 346 B/U] 7.9 (.311) | 6.3 (.248)| 2 (.078) socket |L17DM 53742-5002 |21.5 (846) 26.3 (1.035)| 2.8 (.110) 180 B/U 5 (.374) | 7.9 (.311)| 2 (.078) socket /L17DM 53742-5004 | 21.5 (846) 26.3 (1.035)| 3.2 (.126) 58 C/U 5 (.374)| 7.9 (.311)| 2 (.078) socket L17DM 53742-50060 18.8 (740) | 23.6 (.929) | 1.0 (.039) 178 BIU 9 (.311) |6.3 (.248) | 2 (.078) oe = Ft = <qRight angled shielded contact fe Crimp ferrule and inner solder 5 : S = i Type Dimensions (inch) Cable - RG Trim dimensions (inch) A Max B D E E G plug | L17DM 53741 | 13.5 (.531) | 18.6 (.732) | 1.0 (.039) 178 B/U 9.5 (.374) | 5.9 (.232) |1.6 (.062) plug | L17DM 53741-1 | 13.5 (.531) | 18.6 (.732)| 1.7 (.066")| 179 B/U 316 B/U} 9.5 te 9 (.232) |1.6 (.062) plug | L17DM 5374-3 | 13.5 (.531) | 18.6 (.732)| 2.8 (.110) 180 B/U 10.7 (.421)| 7.9 (.311) }2.4 (.094) plug | L17DM 53741-4 | 13.5 (.531) | 18.6 (.732) | 3.2 (.126) 58 C/U 10.7 (.421)| 7.9 (.311) )2.4 (.094) socket | L17DM 53743-2 | 13.5 (.531) | 18.6 (.732)| 1.0 (.039) 178 BIU 9.5 (.374) | 5.9 (.232) |1.6 (.062) socket | L17DM 53743-3 | 13.5 (.531) | 18.6 (.732) | 1.7 (.066)| 179 B/U 346 BJU) 9.5 (.374) | 5.9 (.232) |1.6 (.062) socket | L17DM 53743-5 | 13.5 (.531) | 18.6 (.732)| 2.8 (.110) 180 B/JU 10.7 (.421)| 7.9 (.311) |2.4 (.094) socket | L17DM 53743-6 | 13.5 (.531) | 18.6 (.732)| 3.2 (.126) 58 C/U 10.7 (.421)| 7.9 (.311) |2.4 (.094) Ferrule and inner solder C C E G | | y F | a, Q = tb Type P/N Dimensions (inch) Trim dimensions (inch) A Max B D Cable - RG E F G plug |L17DM 53741-5000 | 13.5 (.531) | 18.6 (.732) | 1.0 (.039) 178 BIU 9.5 (.374") | 5.9 (.232) | 1.6 (.062) plug |L17DM 53741-5001 | 13.5 (.531) | 18.6 (.732)| 1.7 (.066) | 179 B/U 316 B/U| 9.5 (.374) | 5.9 (.232) | 1.6 (.062) plug |L17DM 53741-5003 | 13.5 (.531) | 18.6 (.732)| 2.8 (.110) 180B/U = |10.7 (.421) | 7.9 (.311) | 2.4 (.094) plug /L17DM 53741-5004 | 13.5 (.531) | 18.6 (.732) | 3.2 (.126) 58 C/U 10.7 (.421) | 7.9 (.311) | 2.4 (.094) socket | L17DM 53743-5000 | 13.5 (.531) | 18.6 (.732) 1.0 (.039) 178 BIU 9.5 (.374) | 5.9 (.232) | 1.6 (.062) socket | L17DM 53743-5001 | 13.5 (.531) | 18.6 (.732)| 1.7 (.066) | 179 BIU 346 B/U| 9.5 (.374) | 5.9 (.232) | 1.6 (.062) socket | L17DM 53743-5003 | 13.5 (.531) | 18.6 (.732)| 2.8 (.110) 180B/U = |10.7 (.421) | 7.9 (.311) | 2.4 (.094) socket | L17DM 53743-5004 | 13.5 (.531) | 18.6 (.732)| 3.2 (.126) 58 C/U 10.7 (.421) | 7.9 (.311) | 2.4 (.094) Crimping tool Hand crimp tool 227-0944 (without dies) (M 22 520/5-01) RG cables MIL reference Amphenol P/N dim. between 2 flat surface cavity A cavity B = RG 58 C/U M 22 520/5-05 227 1221-05 5.41 - WI RG 178 B/U M 22 520/5-03 227 1221-03 - 2.67 = RG 179 B/U M 22 520/5-03 227 1221-03 3.25 - RG 180 B/U M 22 520/5-05 227 1221-05 - 4.52 Extraction tool ties Extraction tool for sizes 8 cts ae L17D429SP ez C CASSEMBLY INSTRUCTIONS Cabling instructions for shielded contacts Straight crimp shielded contacts: inner solder contact outer crimp contact soft solder outer ring \ outer ring coaxial shell braided shield inner sleeve Right angle crimp shielded contacts: inner solder contact outer crimp contact inner sleeve . outer ting outer ring coaxial shell ey soft solder. Emp soft solder cap into shell after cable 3.20 = assembly on 90 type coaxes Assembly method - Slide the outer ring over the cable jacket. Trim the cable - Slide the outer ring towards the inner sleeve ans recover according to the recommended dimensions. the braid. - Insert the cable dielectric and the center conductor inside | - Using crimp hand tool equipped with the appropriate dies, the inner sleeve. crimp in the area defined. - Solder the central conductor to the shielded center contacts. Solder straight shielded contacts: soft solder outer ring : outer ring coaxial shell SS re | _ | eer | SL solder inner sleeve Solder right angle shielded contacts: . . coaxial shell inner sleeve outer ring ~ outer ring 1 C Sel solder, ft sold into shell after cable soft solder. * assembly on 90 type coaxes Assembly method - Slide the outer ring over the cable jacket. Trim the cable - Slide the outer ring towards the inner sleeve ans recover according to the recommended dimensions. the braid. - Insert the cable dielectric and the center conductor inside - Solder by introducing metal through the outer ring hole. the inner sleeve. - Solder the central conductor to the shielded center contacts. @ : <How to build your part number re) a te ro = 4 I TT 777 | RoHS Compliant | Contacts and Shell Contact Plating Shell Tinned | Tinned & Indents; Plug only 0.4um(16u") Au | 77 717 0.76um(30p) Au} 177 777 Shell size and Configuration: ESW1, A3W3, A7W2, A11W1, B5W5, BOW4, B13W3, B17W2, B21W1, C8W8, C13W6, C17W5, C21WA4 C25W3, C27W2, D24W7, D36W4, D43w2 Gender: P: Pin a S: Socket Contacts: For straight BLANK: Solder-cup signal contacts only P3SY: 20-40 Amp power & signal mix P2SY: 10-20 Amp power & signal mix CSY: Coax & signal mix SY: Signal only P3Y: 20-40 Amp power only (3W3, 5W5, 8W8) P2Y: 10-20 Amp power only (3W3, 5W5, 8W8) CY: Coax only (3W3, 5W5, 8W8) For right angle MP3SV: US Footprint, 20-40 Amp power & signal mix MP2SV: US Footprint, 10-20 Amp power & signal mix MCSV: US Footprint, Coax & signal mix MSV: US Footprint, Signal only MP3V: US Footprint, 20-40 Amp power only (3W3, 5W5, 8W8) MP2V: US Footprint, 10-20 Amp power only (3W3, 5W5, 8W8) MCV: US Footprint, Coax only (3W3, 5W5, 8W8) EP3SV: European Footprint, 20-40 Amp power & signal mix EP2SV: European Footprint, 10-20 Amp power & signal mix ESV: European Footprint, Signal only EP3V: European Footprint, 20-40 Amp power only (3W3, 5W5, 8W8) EP2V: European Footprint, 10-20 Amp power only (3W3, 5W5, 8W8) HP3SV: Mixed Footprint, 20-40 Amp power & signal mix HP2SV: Mixed Footprint, 10-20 Amp power & signal mix HCSV: Mixed Footprint, Coax & signal mix HSV: Mixed Footprint, Signal only HP3V: Mixed Footprint, 20-40 Amp power only (3W3, 5/5, 8W8) HP2V: Mixed Footprint, 10-20 Amp power only (3W3, 5W5, 8W8) HCV: Mixed Footprint, Coax only (3W3, 5W5, 8W8) Special Deviations Please consult factory Board Mounting Options For Straight Blank: .120(3.05mm) Clear Hole RM53: M3 Threaded (panel side) standoff with boarlock RM54: 4-40UNC Threaded (panel side) standoff with boardlock RM84: Non-Removable M3 screwlock, with standoff and boardlock For Right Angle RM6: Metal bracket with boardlocks | panel Mounting Options For right angle & cable mount Blank: .120"(3.05mm) Clear Hole 3F: M3 Front Screwlock 3R: M3 Rear Threaded Insert 4F: #4-40 Front Screwlock 4R: #4-40 Threaded Rear Insert FM: Float mount system A514: Blind Mate Guide Pin HOW TO ORDER TW/E1 | (i \~ NOTES Memo Do not hesitate to contact us for further information Amphenol Amphenol IT & Communication Products Block A3/A4, The 4th Industrial District of Industrial Headquarters, Dong Keng Road Gong Ming Town, Shen Zhen China Fax:+86(0)755 2754 9955 Technical Support Tel:+86(0)755 2717 7945 Info-dsub@amphenol.com.cn http:/Awww.dsubconnector.com The information given in this document are as a guideline only. We reserve the right to modify our products in any way we deem necessary. Any duplication is prohibited, unless approved in writing. E13/B