The MPC8360 COM Express System on Module (SOM) is a
compact, product-ready hardware and software solution that
fast forwards embedded designs.
The MPC8360 SOM adheres to the COM Express Compact
form factor and is based on the Type III pin-out specification. This
combination offers the essential features for industrial, networking,
and medical applications. Using a SOM allows engineers to
design a custom baseboard that meets their specific needs and is
compatible with other Logic SOMs. This compatibility makes it easy
for developers to upgrade their product for greater functionality and
performance—while still using their original baseboard design.
By starting with the corresponding Zoom™ PowerQUICC™
Development Kit, developers can write application software on the
same hardware that will be used in the final product.
The MPC8360 PowerQUICC™ processor from Freescale
Semiconductor provides both control and communications
processing in a single chip, making it a cost-effective solution for
any product requiring deterministic industrial networking protocols.
MPC8360 COM EXPRESS :: HIGHLIGHTS:
+ Product-ready SOM with the Freescale
PowerQUICC™ MPC8360 processor
running at 400 MHz or MPC8360E
processor running at 667 MHz
+ COM Express Compact form factor
95 mm x 95 mm x 14.5 mm
+ Long product life-cycle
+ U-Boot bootloader installed in flash
+ Linux Board Support Packages (BSPs)
+ 0 ˚C to 70 ˚C (commercial temp) or
-40 ˚C to 85 ˚C (industrial temp)
+ RoHS compliant
ZOOM™ PowerQUICC™ KIT :: FEATURES:
+ Application baseboard
+ MPC8360 COM Express SOM
(COMMPC8360E-10-2752FCR)
+ Production-ready QUICCEngine™
micro-code for PROFIBUS, IEEE(R) 1588,
and Ethernet PowerLink available from
third-parties
+ Necessary accessories to immediately get
up and running
+ Kit available from Freescale
(MPC8360E-RDK)
+ See Zoom™ PowerQUICC™ Development
Kit product brief for more information
MPC8360 COM Express SOM
PRODUCT BRIEF:
Logic :: Freescale
MPC8360 COM Express System on Module
Designing a product around Logic’s SOM
allows developers to easily combine their core
technologies with the high performance of the
MPC8360 PowerQUICC™ processor.
embedded product solutions
411 N. Washington Ave. Suite 400 Minneapolis, MN 55401
T : 612.672.9495 F : 612.672.9489 I : www.logicpd.com PN: 1007946 Rev B© 2007 Logic Product Development. All rights reserved.
Product Features
Processor
+ Freescale PowerQUICC™ MPC8360 processor
running at 400 MHz or MPC8360E processor
running at 667 MHz
SDRAM Memory
+ DDR2; 128, 256, 512 MB, or 1 GB
+ ECC support
Flash Memory
+ NOR flash; 8 or 16 MB (8 MB standard)
+ NAND flash; 64 or 128 MB (64 MB standard)
Display
+ Programmable color graphics controller
(Fujitsu MB86277)
+ Built-in driver supports up to 1024 x 768 with
LVDS interface
+ LVDS can be converted to 18-bit LCD on
baseboard
Touch Screen
+ Integrated 4-wire touch screen controller
Network Support
+ Two 10/100 Base-T Ethernet controllers for
application/debug
+ Two 10/100/1000 Base-T Ethernet controllers
for application/debug
PC Card Expansion
+ 32-bit PCI connection
USB
+ Four USB 2.0 full-speed host interfaces
Serial Ports
+ Four 16C550 compatible UARTs
GPIO
+ Programmable I/O depending on peripheral
requirements
Software
+ U-Boot bootloader
+ Linux BSP
Mechanical
+ COM Express Compact form factor
95 mm wide x 95 mm long x 14.5 mm high
RoHS Compliant
ZOOM™ PowerQUICC™ Development Kit Ordering Information
Model Number COM Express Configuration Recommended Resale
MPC8360E-RDK COMMPC8360E-10-2752FCR $999
SPI
USB Host
Transceiver
Touch
Controller*
Graphics
Controller*
DDR2
SDRAM
NOR Flash
NAND Flash
4-Port
USB Hub
10/100
Ethernet (x2)
10/100/1000
Ethernet (x2)*
UART
(x4)
MPC8360
or
MPC8360E
Processor
*on select configurations
MPC8360 COM Express Block Diagram
LOGIC WEBSITE :: DESIGN RESOURCES:
+ Logic Technical Support : http://www.logicpd.com/support/
+ Technical Discussion Group : http://www.logicpd.com/support/tdg/
+ Frequently Asked Questions (FAQ) : http://www.logicpd.com/support/faq/
+ For more information contact Logic Sales : product.sales@logicpd.com
MPC8360 COM Express Ordering Information
Model Number
Speed
(MHz)
SDRAM
(MB)
NAND Flash
(MB)
NOR Flash
(MB)
Graphics/
Touch Ethernet Temperature
COMMPC8360-10-1652LCR 400 128 64 8 N 10/100 0 ˚C to 70 ˚C
COMMPC8360E-10-2752FCR 667 256 64 8 Y 10/100/1000 0 ˚C to 70 ˚C
+ Contact Logic for availability of industrial temp configurations.
