40 Watts Total Power: Input Voltage: LPT40 Series # of Outputs: 40-55 Watts 85-264 VAC 120-300 VDC Triple Electrical Specs Input Input range 85-264 VAC 120-300 VDC 47-440 Hz <18 A peak @ 115 VAC; <36 A peak @ 230 VAC, cold start @ 25C 1 A max. (RMS) @ 115 VAC 70% typical at full load (60% for LPT41) FCC Class B conducted CISPR 22 Class B conducted EN55022 Class B conducted VDE 0878 PT3 Class B conducted Frequency Inrush current Input current Efficiency EMI filter Safety ground leakage current Special Features * * * * * * * * * * <0.5 mA @ 50/60 Hz, 264 VAC input Output Universal input 3" x 5" footprint Remote sense on main output Built-in EMI filter Low output ripple Adjustable main output Overvoltage protection Overload protection 110 KHz switching frequency LPX40 enclosure kit available Maximum power Adjustment range Cross regulation Hold-up time Overload protection Overvoltage protection Environmental Remote sense Operating temperature: 0 to 50C ambient; derate each output at 2.5% per degree from 50 to 70C 40 W for convection, (LPT41, 25W); 55 W with 30 CFM forced air (LPT41, 41W) -5, +10% minimum 2% on output 1; 5% on outputs 2, 3 20 ms @ 40 W load, 115 VAC nominal line Short circuit protection on all outputs. Case overload protected @ 110-145% above peak rating 5.7 to 6.7 VDC on main output LPT41: 3.6 to 4.6 VDC Compensates for 0.5 V lead drop min. Will operate without remote sense connected. Reverse connection protected. Electromagnetic susceptibility: designed to meet IEC 801, -2, -3, -4, -5, -6, Level 3 Humidity: Operating; non-condensing 5% to 95% Vibration: Three orthogonal axes, sweep at 1 oct/min, 5 min. dwell at four major resonances 0.75 G peak 5 Hz to 500 Hz, operational Storage temperature: -40 to 85C Temperature coefficient: .04% per C MTBF demonstrated: >550,000 hours at full load and 25C ambient condition 84 America's (USA): 1-888-41-ASTEC Safety VDE 0805/EN60950 (IEC950) UL UL1950 CSA CSA 22.2-234 Level 3 NEMKO EN 60950/EMKO-TUE (74-sec) 203 BABT EN60950/BS7002 CB Certificate and report CE Mark (LVD) Europe (UK): 44 (1384) 842-211 11774-3336-1241 (LC# 84936) E132002 LR53982C P94100374 PS/604782 1118,1122,1123,1124 Asia (HK): 852-2437-9662 EUROPE ASIA Astec House, Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX, UK Telephone: 44 (1384) 842-211 Facsimile: 44(1384) 843-355 Units 2111-2116, Level 21 Tower1, Metroplaza 223, Hing Fong Road Fwai Fong, New Territories Hong Kong Telephone: 852-2437-9662 Facsimile: 852-2402-4426 AMERICAS 5810 Van Allen Way Carlsbad, CA 92008 Telephone: 760-930-4600 Facsimile: 760-930-0698 LPT40 Series Ordering Information Model Number Output Voltage Minimum Load Maximum Load with Convection Cooling Maximum Load with 30 CFM Forced Air Peak Load1 Regulation2 Ripple P/P (PARD)3 LPT41 +3.3 V +5 V +12 V 0.5 A 0 0 4A 1.5 A 0.5 A 7A 2.0 A 0.7 A 7A 2.5 A 0.7 A 2% 2% 5% 50 mV 50 mV 120 mV LPT42 +5 V +12 V -12 V 0.4 A 0.2 A 0A 4A 2A 0.5 A 5A 2.5 A 0.7 A 7A 4A 1A 2% 5% 5% 50 mV 120 mV 120 mV LPT43 +5 V +12 V -12 V 0.5 A 0A 0A 6A 0.5 A 0.5 A 8A 0.7 A 0.7 A 9A 1A 1A 2% 5% 5% 50 mV 120 mV 120 mV LPT44 +5 V +12 V -5 V 0.4 A 0.2 A 0A 4A 2A 0.5 A 5A 2.5 A 0.7 A 7A 4A 1A 2% 5% 5% 50 mV 120 mV 50 mV LPT45 +5 V +15 V -15 V 0.4 A 0.2 A 0A 4A 2A 0.5 A 5A 2.5 A 0.7 A 7A 3A 1A 2% 5% 5% 50 mV 150 mV 150 mV LPT46 +5 V +24 V +12 V 0.4 A 0.1 A 0A 4A 1.0 A 0.5 A 5A 1.5 A 0.7 A 6A 2A 1A 2% 7% 5% 50 mV 240 mV 120 mV LPT47 +5 V +24 V -12 V 0.4 A 0.2 A 0A 4A 1.0 A 0.5 A 5A 1.5 A 0.7 A 6A 2A 1A 2% 7% 5% 50 mV 240 mV 120 mV LPT48 +5 V +24 V -5 V 0.4 A 0.1 A 0A 4A 1.0 A 0.5 A 5A 1.5 A 0.7 A 6A 2A 1A 2% 7% 5% 50 mV 240 mV 50 mV 1. 2. 3. 4. Peak current lasting <30 seconds with a maximum 10% duty cycle. At 25C including initial tolerance, line voltage, load currents and output voltages adjusted to factory settings. Peak-to-peak with 20 MHz bandwidth and 10 F in parallel with a 0.1 F capacitor at rated line voltage and load ranges. Minimum Loads are required. Power Derating Curve 55W 30 CFM Forced Air Cooling Pin Assignments Connector LPT41 LPT42 LPT43 LPT44 LPT45 40W LPT46 LPT47 Output Power (Watts) LPT48 SK1-1 SK1-3 Neutral Line Neutral Line Neutral Line Neutral Line Neutral Line Neutral Line Neutral Line Neutral Line SK2-1 SK2-2 SK2-3 SK2-4 SK2-5 SK2-6 SK201-1 SK201-2 5V 3.3 V 3.3 V Common Common 12 V +Sense -Sense +12 V +5 V +5 V Common Common -12 V +Sense -Sense +12 V +5 V +5 V Common Common -12 V +Sense -Sense +12 V +5 V +5 V Common Common -5 V +Sense -Sense +15 V +5 V +5 V Common Common -15 V +Sense -Sense +24 V +5 V +5 V Common Common +12 V +Sense -Sense +24 V +5 V +5 V Common Common -12 V +Sense -Sense +24 V +5 V +5 V Common Common -5 V +Sense -Sense 30W 20W Natural Convection Cooling 27.5W 20W 10W 0W 0C 10C 20C 30C 40C 50C 60C 70C TA - Ambient Temperature - C 0.22" (5.6) 4.55" (115.6) 5.00" (127) M1 GND Mating Connectors AC Input: Molex 09-50-8031 (USA) 09-91-0300 (UK) PINS: 08-58-0111 DC Outputs: Molex 09-50-8061 (USA) 09-91-0600 (UK) PINS: 08-58-0111 Remote Sense: Molex 22-01-2025 PINS: 08-50-0114 Astec Connector Kit #70-841-006, includes all of the above. Notes: 1. Specifications subject to change without notice. 2. All dimensions in inches (mm), tolerance is .02". 3. Mounting holes M1 and M2 should be grounded for EMI purposes. 4. Mounting hole M1 is safety ground connection. 5. Specifications are for convection rating at factory settings at 115 VAC input, 25C unless otherwise stated. 6. Warranty: 1 year 7. Weight: 0.5 lb. / 0.23 kg SK201 3.00" (76.2) 2.55" (64.8) 1 SK 1 3 N M2 _ + 1 2 3 4 5 6 Remote Sense Connector Voltage Adj. Pot SK 2 L 0.15" (4) DIA (4 places) 1.14" (29) 0.12" (3) www.astec.com 85