PDS-60 c a 7 . 5 V Color Kinetics(R) PDS-60ca 7.5V intelligent, indoor/outdoor, power/data supply is specifically designed for Color Kinetics 7.5 volt Chromasic(R) fixtures. PDS-60ca 7.5V provides a robust 62W power source and a choice of intelligent data interfaces. The available data interfaces condition data supplied from Ethernet or DMX512 controllers to a format compatible with the fixtures. PDS-60ca 7.5V is also available as a preprogrammed unit. The integration of power and data simplifies wiring installation, and the selection of control configurations expands the versatility of the PDS-60ca 7.5V. pds-60ca 7.5v dmx/Ethernet. The DMX interface is used for installations using a DMX controller such as an iPlayer 2, ColorDial, or a third party DMX controller. The Ethernet interface is designed to work with Light System Manager or Video System Manager for large installations. pds-60ca 7.5v preprogrammed. The preprogrammed unit is best suited for installations using simple effects across all light nodes. The preprogrammed unit controls a maximum of 144 nodes. The preprogrammed shows are: Chasing Rainbow, Fixed Color, Color Wash, Random Fade, Tile Burst, and Tile Spiral. features * * * * * * * Economical Compact size Ease of installation Ethernet/DMX ready Preprogrammed interface Robust 62W power source Wet/Damp NEMA 4 housing PDS-60ca 7.5V is housed in a compact NEMA 4 (IP66) enclosure designed for use in wet locations and complies with National Electrical Code (NEC) requirements. Each PDS-60ca 7.5V features multiple standard conduit entries sized for 1/2-inch (15.8 mm) and 3/4-inch (20.9 mm) trade sized conduit. The data drive circuitry has been specifically designed with short circuit protection to prevent failures due to incorrect wiring. PDS-60ca 7.5V automatically accommodates supply voltages ranging from 100VAC to 240VAC, which must be hard-wired to the supply. Color Kinetics 7.5V Chromasic fixtures are pre-attached connectors for easy fixture connection to output terminals. RJ45 data input accepts data from Ethernet or DMX Cat 5 data cables. If you use the DMX interface on the DMX/Ethernet power/data supply or if you use the Preprogrammed power/data supply, the data output connectors let you daisy-chain DMX data to other DMX supplies. DRY WET & DAMP PDS - 6 0 c a 7 . 5 V S p e c i f i c a t i o n s PDS-60ca 7.5V iColor Flex SL iColor Tile FX 2:2 AC 100-240V 370-144mA - iColor Flex SL 430-200mA - iColor Tile FX 2:2 ITEM# 109-000015-00 (Preprogrammed) 109-000015-03 (DMX/Ethernet) For use under one or more of the following patents: U.S. Patent Nos. 6,016,038, 6,150,774, 6,777,891, and other patents listed at http://colorkinetics.com/patents/. Other patents pending. (c)2003-2006 Color Kinetics Incorporated. All rights reserved. Chromacore, Chromasic, CK, the CK logo, Color Kinetics, the Color Kinetics logo, Color Kinetics The Leader in Intelligent Light, ColorBlast, ColorBlaze, ColorBurst, ColorCast, ColorPlay, ColorScape, DIMand, Direct Light, EssentialWhite, eW, iColor, iColor Cove, IntelliWhite, iW, iPlayer, Light Without Limits, Optibin, Powercore, QuickPlay, Sauce, the Sauce logo, and Smartjuice are either registered trademarks or trademarks of Color Kinetics Incorporated in the United States and/or other countries. All other brand or product names are trademarks or registered trademarks of their respective owners. BR0128 Rev 07 Specifications subject to change without notice. Refer to www.colorkinetics.com for the most recent version. power output 7.5VDC, 62W power input 100VAC-240VAC (auto ranging), 50Hz - 60Hz; 1.7A Power factor correction (PFC) heat dissipation 25 percent of total power output ambient operating temp 14F to 104F (-10C to 40C) housing NEMA 4 enclosure dimensions 8.8" (22.4 cm) x 5.5" (14 cm) x 3.6" (9 cm) weight 4.5 lbs. (2 kg) connectors Data: RJ45 input and output connectors Power: 4-pin output connectors data input DMX: Color Kinetics DMX controllers or DMX512 compatible Ethernet: Color Kinetics Light System Manager or Video System Manager Preprogrammed: No external data input Chromasic 7.5V IP66 Two 4amp, 3AG fuses Class 2 UL/cUL, CE, PSE data output protection rating fused protection classification listings Philips Solid-State Lighting Solutions * 3 Burlington Woods Drive * Burlington, MA 01803 * USA Tel 888 FULL RGB * Tel 617 423 9999 * Fax 617 423 9998 * info@colorkinetics.com * www.colorkinetics.com PDS-60ca 7.5V physical dimensions DMX/ETHERNET 8.8" 22.4 cm OVERALL DIMENSIONS 5.5" 14 cm DMX IN DMX OUT OUT 2 ETHERNET OUT 1 2 1 Sized for 1/2" trade size conduit (15.8 mm) 3.6" 9 cm Sized for 3/4" trade size conduit (20.9 mm) MOUNTING DIMENSIONS 8.3" (21 cm) Mounting Slots 1" (2.5 cm) 2" (5 cm) DMX IN DMX OUT OUT 2 1 ETHERNET OUT 1 2 Power Out/ Data Connection 0.8" (2 cm) PDS - 6 0 c a 7 . 5 V ( DMX / E t h e r n e t ) item# 109-000015-03 data connector Input and output: RJ45 output connector 4-pin supply connector Flying leads weight 4.5 lbs. (2 kg) Philips Solid-State Lighting Solutions * 3 Burlington Woods Drive * Burlington, MA 01803 * USA Tel 888 FULL RGB * Tel 617 423 9999 * Fax 617 423 9998 * info@colorkinetics.com * www.colorkinetics.com PDS-60ca 7.5V physical dimensions PREPROGRAMMED 8.3" (21 cm) OVERALL DIMENSIONS 1" (2.5 cm) 2" (5 cm) OUT 1 DMX/ETHERNET IN OUT 2 DMX OUT Sized for 1/2" trade size conduit (15.8 mm) 3.6" 9 cm Sized for 3/4" trade size conduit (20.9 mm) MOUNTING DIMENSIONS 8.3" (21 cm) Mounting Slots 1" (2.5 cm) 2" (5 cm) DMX/ETHERNET IN OUT 1 DMX OUT OUT 2 0.8" (2 cm) Power Out/ Data Connection PDS - 6 0 c a 7 . 5 V ( PR E PROGRAMM E D ) item# 109-000015-00 data connector Input and output: RJ45 output connector 4-pin supply connector Flying leads weight 4.5 lbs. (2 kg) Philips Solid-State Lighting Solutions * 3 Burlington Woods Drive * Burlington, MA 01803 * USA Tel 888 FULL RGB * Tel 617 423 9999 * Fax 617 423 9998 * info@colorkinetics.com * www.colorkinetics.com 0.8" (2 cm) PDS-60ca 7.5V functional flow diagram DMX OPTIONAL DAISY CHAIN To Lights To Lights PDS-60ca 7.5V (DMX/Ethernet) PDS-60ca 7.5V (DMX/Ethernet) DMX IN DMX OUT OUT 2 1 DMX OUT ETHERNET OUT 1 2 DMX IN OUT 2 1 ETHERNET OUT 1 2 Terminator DMX OUT 100-240VAC Color Kinetics Controller DMX IN 100-240VAC DMX IN (CAT5/RJ45) PREPROGRAMMED To Lights PDS-60ca 7.5V (Preprogrammed) DMX/ ETHERNET IN DMX OUT 100-240VAC DAISY CHAIN PREPROGRAMMED TO DMX PDS-60ca 7.5V (Preprogrammed) To Lights To Lights PDS-60ca 7.5V (DMX/Ethernet) OUT 2 1 DMX OUT DMX OUT ETHERNET DMX IN 2 OUT 1 DMX/ ETHERNET IN 100-240VAC DMX IN Terminator DMX OUT 100-240VAC For complete installation instructions and safety precautions, refer to the PDS-60ca 7.5V/12V User Guide and wiring diagrams located at www.colorkinetics.com/support. Philips Solid-State Lighting Solutions * 3 Burlington Woods Drive * Burlington, MA 01803 * USA Tel 888 FULL RGB * Tel 617 423 9999 * Fax 617 423 9998 * info@colorkinetics.com * www.colorkinetics.com PDS-60ca 7.5V functional flow detail ETHERNET DMX IN DMX OUT Ethernet IN ETHERNET OUT 1 PDS-60ca 7.5V (DMX/Ethernet) OUT 2 2 1 To Lights DMX IN DMX OUT ETHERNET OUT 1 PDS-60ca 7.5V (DMX/Ethernet) OUT 2 Ethernet IN Ethernet Switch 2 1 Light System Engine PC To Lights For complete installation instructions and safety precautions, refer to the PDS-60ca 7.5V/12V User Guide and wiring diagrams located at www.colorkinetics.com/support. Philips Solid-State Lighting Solutions * 3 Burlington Woods Drive * Burlington, MA 01803 * USA Tel 888 FULL RGB * Tel 617 423 9999 * Fax 617 423 9998 * info@colorkinetics.com * www.colorkinetics.com