ALUMINUM ELECTROLYTIC CAPACITORS LS Series: Snap-In Lug and Terminal Types FEATURES * Has a snap-in terminal which can solder to a PCB directly and need not fixture to save processing time. * Suitable for electronic equipment with medium-high voltage circuits. * Printed circuit board terminal snap-in type and lug terminal type available. SPECIFICATIONS Item Performance Operating Temperature Range -40C ~ +85C Capacitance Tolerance 20% (120Hz, 20C) I = 0.02CV or 1.5 (mA) whichever is greater (after 5 minutes) Where, C = rated capacitance in F. V=rated DC working voltage in V. Leakage Current (at 20C) Dissipaton Factor Tan at 120 Hz, 20C Rated Voltage 16 25 35 50 63 100 160 200 250 350 400 450 Tan (max) 0.40 0.30 0.25 0.20 0.15 0.15 0.10* 0.10* 0.10* 0.15 0.15 0.15 *: 0.15 for D = 35mm Impedance ratio shall not exceed the values given in the table below Rated Voltage Low Temperature Characteristics (at 120Hz) Impedance Ratio 16 25 35 50 63 100 160 200 250 350 400 Z(-25C) /Z(+20C) 4 3 3 2 2 2 4 4 4 4 8 8 Z(-40C) /Z(+20C) 15 10 8 6 6 5 4 8 10 16 18 20 Test Time Load Life Test 450 2000 Hrs Capacitance Change 20% Dissipation Factor Less than 200% of specifiec value Leakage Current Within specified values The above specification shall be satisfied when the capacitors are restored to 20C after rated voltage applied for 2000 hrs at 85C Test Time Shelf Life Test 1000 Hrs Capacitance Change 20% Dissipation Factor Less than 200% of specifiec value Leakage Current Within specified values The above specification shall be satisfied when the capacitors are restored to 20C after exposing them for 2000 hrs at 85C Freq. (Hz) W.V.(V) Ripple Current & Frequency Multipliers Ripple Current & Temperature Multipliers 60 120 500 1K 10K up Under 100 0.92 1.00 1.13 1.19 1.20 160 and up 0.81 1.00 1.32 1.45 1.50 350 and up 0.77 1.00 1.30 1.41 1.43 Temperature (C) 40 55 70 85 Multiplier 2.10 1.80 1.50 Standards 1.00 Satisfies Characteristic W of JIS C 5141 PART NUMBER EXAMPLE LS 101 M 2G 220 300 SNAP-IN TERMINAL TYPE Case Size (22mm X 30mm) Rate Voltage (400V) Capacitance tolerance (20%) (100mF) Capacitance Series name RFE International * Tel:(949)583-0808 * Fax:(949)583-9898 * E-Mail Sales@rfeinc.com C1CG02 REV 2004.7.29 ALUMINUM ELECTROLYTIC CAPACITORS LS Series: Snap-In Lug and Terminal Types DIMENSIONS & PERMISSABLE RIPPLE CURRENT Dimension: DxL(mm); Ripple Current: mA/RMS at 120Hz 85C VDC F 6800 16V D Code DxL 822 10000 103 12000 123 15000 153 18000 183 22000 223 22 1500 1800 2200 2700 3300 3900 4700 5600 D 25 2.51 A/rms DxL x 30 2.40 22 x 40 2.80 22 x 50 3.81 25 x 50 4.27 25 x 25 2.56 25 x 30 2.74 25 x 40 3.81 30 x 40 4.27 30 x 25 2.97 30 x 35 3.85 35 x 40 4.15 22 x 45 3.47 25 x 50 4.37 30 x 45 4.83 25 x 35 3.10 30 x 40 4.36 35 x 35 4.79 35 x 30 4.41 22 x 35 2.72 x 30 2.54 22 x 40 3.09 22 x 50 3.57 30 x 45 4.97 30 x 50 5.49 25 x 30 2.74 25 x 30 3.12 25 x 40 3.53 35 x 35 4.92 35 x 40 5.47 30 x 25 3.21 30 x 30 3.46 35 x 25 3.20 35 x 45 6.19 22 x 30 2.86 22 x 45 3.48 25 x 45 3.98 30 x 50 5.60 25 x 25 2.95 25 x 35 3.43 30 x 35 4.01 35 x 40 5.58 30 x 30 3.86 35 x 30 4.42 35 x 25 3.54 22 x 35 3.29 22 x 50 4.00 30 x 40 4.52 25 x 30 3.46 25 x 40 3.95 35 x 35 5.01 4.12 30 x 25 3.66 30 x 35 22 x 40 3.72 25 x 45 4.45 30 x 45 4.71 25 x 35 3.98 30 x 35 4.46 35 x 40 5.54 35 x 30 4.63 35 x 45 6.04 22 x 50 4.37 30 x 45 5.21 25 x 40 4.26 35 x 35 5.16 30 x 30 4.21 35 x 25 4.15 25 DxL 35 A/rms DxL 50 A/rms DxL 22 x 25 272 22 x 25 332 392 1.91 2.01 45 100 160 DxL A/rms DxL A/rms DxL A/rms 22 x 25 1.82 22 x 35 2.41 30 x 45 3.42 30 x 50 3.70 25 x 30 2.43 30 x 40 3.42 35 x 50 4.04 30 x 25 2.46 35 x 40 3.54 35 x 35 3.54 22 x 40 2.71 30 x 50 4.12 35 x 50 4.33 25 x 35 2.75 35 x 50 4.50 35 x 40 3.95 22 x 45 3.08 35 x 50 4.74 35 x 50 4.69 25 x 40 3.13 35 x 45 4.53 22 x 30 1.82 2.31 30 x 30 3.09 25 x 25 2.30 35 x 25 3.14 22 x 35 2.49 25 x 45 3.57 25 x 30 2.52 30 x 34 3.55 35 x 30 3.71 22 x 30 2.37 22 x 35 2.62 25 x 50 4.06 25 x 25 2.38 25 x 30 2.64 30 x 40 4.05 30 x 25 2.78 22 x 35 2.65 22 x 40 2.93 30 x 45 4.54 25 x 30 2.68 25 x 35 2.97 35 x 35 4.49 2.41 22 x 30 2.41 22 x 40 2.99 22 x 50 3.39 30 x 50 5.13 25 x 25 2.42 25 x 25 2.42 25 x 35 3.03 25 x 40 3.36 35 x 40 5.11 30 x 25 2.81 30 x 30 3.32 35 x 25 3.36 22 x 45 3.36 25 x 45 3.77 35 x 45 5.75 25 x 40 3.41 30 x 35 3.75 30 x 30 3.37 35 x 25 3.42 2.21 22 x 35 2.75 200 A/rms 22 x 30 22 x 25 6.44 DxL 22 x 25 222 35 x 63 A/rms 182 562 63 A/rms DxL 22 152 472 50 A/rms DxL 22 VDC Code x 35 A/rms DxL 682 8200 F 25 A/rms RFE International * Tel:(949)583-0808 * Fax:(949)583-9898 * E-Mail Sales@rfeinc.com C1CG02 REV 2004.7.29 ALUMINUM ELECTROLYTIC CAPACITORS LS Series: Snap-In Lug and Terminal Types DIMENSIONS & PERMISSABLE RIPPLE CURRENT Dimension: DxL(mm); Ripple Current: mA/RMS at 120Hz 85C VDC F 560 680 820 1000 1200 Code D 100 DxL 160 A/rms 561 681 821 102 122 DxL 200 A/rms DxL 250 A/rms DxL 350 A/rms DxL 400 A/rms DxL A/rms 22 x 35 1.94 22 x 45 2.08 22 x 50 2.08 35 x 45 2.20 35 x 50 2.32 22 x 30 1.77 22 x 40 1.92 25 x 45 2.13 35 x 40 2.07 35 x 45 2.19 25 x 30 1.95 25 x 35 2.01 30 x 35 2.13 25 x 25 1.77 30 x 30 2.10 35 x 30 2.20 30 x 25 2.02 30 x 25 1.90 35 x 25 2.00 22 x 40 2.18 22 x 50 2.34 25 x 50 2.40 35 x 50 2.49 35 x 50 2.51 22 x 35 1.95 22 x 45 2.17 30 x 40 2.42 25 x 35 2.21 25 x 40 2.27 35 x 35 2.49 25 x 30 1.97 30 x 35 2.39 35 x 30 2.28 30 x 25 2.14 30 x 30 2.18 35 x 25 2.30 22 x 50 2.54 22 x 50 2.57 30 x 45 2.72 22 x 40 2.20 25 x 45 2.63 35 x 40 2.87 25 x 40 2.47 30 x 40 2.77 35 x 35 2.60 25 x 35 2.24 30 x 35 2.55 30 x 30 2.44 35 x 35 2.87 30 x 25 2.18 35 x 30 2.63 35 x 25 2.50 22 x 40 2.20 25 x 50 2.96 30 x 50 3.07 25 x 45 2.88 30 x 45 3.13 35 x 45 3.18 25 x 40 2.62 30 x 40 2.90 35 x 40 2.96 30 x 35 2.87 35 x 35 3.09 30 x 30 2.58 35 x 30 2.96 35 x 50 3.71 35 x 25 2.64 22 x 30 2.09 25 x 50 3.30 30 x 50 3.43 25 x 25 2.10 25 x 25 3.02 30 x 45 3.17 30 x 40 3.32 35 x 40 3.40 30 x 35 3.01 35 x 35 3.12 35 x 35 3.43 35 x 30 3.10 RFE International * Tel:(949)583-0808 * Fax:(949)583-9898 * E-Mail Sales@rfeinc.com C1CG02 REV 2004.7.29 ALUMINUM ELECTROLYTIC CAPACITORS LS Series: Snap-In Lug and Terminal Types DIMENSIONS & PERMISSABLE RIPPLE CURRENT Dimension: DxL(mm); Ripple Current: mA/RMS at 120Hz 85C VDC F 56 68 Code D 160 DxL 200 A/rms DxL 250 A/rms DxL 350 A/rms DxL 400 A/rms DxL 450 A/rms 560 22 680 22 82 x 25 0.60 22 x x 25 25 0.54 0.60 820 100 120 22 101 470 1.04 22 x 25 1.04 1.15 22 x 25 1.15 1.27 22 x 25 1.27 1.40 0.66 22 x 25 0.91 22 x 25 1.01 1.62 391 471 A/rms 22 x 25 0.49 22 x 30 0.59 22 x 25 0.53 22 x 30 0.64 25 x 25 0.64 22 x 30 0.71 22 x 35 0.72 22 x 25 0.71 25 x 30 0.68 22 x 35 0.83 22 x 40 0.78 25 x 35 0.78 25 x 35 0.79 25 x 30 0.73 30 x 25 0.77 22 x 35 0.83 22 x 40 0.90 22 x 50 0.94 25 x 30 0.84 22 x 35 0.84 22 x 45 0.88 30 x 25 0.87 25 x 30 0.86 25 x 40 0.92 30 x 25 0.89 25 x 35 0.85 30 x 30 0.91 22 x 40 0.99 22 x 45 1.02 22 x 50 1.07 25 x 35 1.01 22 x 40 0.96 25 x 45 1.10 25 x 30 0.92 25 x 35 0.98 25 x 40 1.02 30 x 25 0.98 30 x 30 1.03 30 x 35 1.10 30 x 25 0.94 30 x 30 1.01 35 x 25 1.05 35 x 30 1.13 22 x 35 1.27 22 x 45 1.14 22 x 50 1.15 25 x 50 1.27 22 x 30 1.16 25 x 40 1.14 25 x 40 1.12 25 x 45 1.19 25 x 25 1.19 25 x 35 1.05 30 x 35 1.18 30 x 40 1.28 30 x 30 1.12 30 x 30 1.08 30 x 35 1.18 35 x 25 1.13 35 x 30 1.25 22 x 35 1.38 22 x 50 1.27 25 x 45 1.28 30 x 45 1.41 22 x 30 1.26 25 x 45 1.30 30 x 40 1.35 30 x 40 1.32 25 x 25 1.29 25 x 40 1.21 30 x 35 1.25 35 x 35 1.39 30 x 35 1.29 35 x 30 1.31 35 x 30 1.33 35 x 25 1.21 22 x 30 1.43 22 x 40 1.53 25 x 50 1.53 25 x 50 1.46 30 x 50 1.63 25 x 25 1.43 22 x 35 1.40 30 x 40 1.45 30 x 45 1.53 35 x 45 1.70 25 x 30 1.46 35 x 30 1.50 30 x 40 1.44 35 x 40 1.59 30 x 25 1.51 35 x 35 1.51 331 22 x 30 390 0.95 271 22 x 25 330 25 221 22 x 25 270 x 181 22 x 25 220 0.95 22 151 22 x 25 180 25 121 22 x 25 150 x DxL 35 x 30 1.40 22 x 35 1.63 22 x 45 1.72 30 x 45 1.65 30 x 50 1.83 30 x 50 1.77 22 x 30 1.50 22 x 40 1.57 30 x 40 1.55 30 x 45 1.73 35 x 50 1.94 25 x 30 1.67 25 x 35 1.64 35 x 35 1.63 35 x 40 1.82 25 x 25 1.50 30 x 30 1.72 35 x 35 1.70 30 x 25 1.55 35 x 50 2.13 22 x 30 1.73 22 x 40 1.87 22 x 50 1.91 30 x 50 1.93 30 x 50 1.99 25 x 25 1.75 22 x 35 1.71 22 x 45 1.77 30 x 45 1.81 35 x 45 2.07 25 x 30 1.78 25 x 40 1.86 35 x 40 1.92 35 x 40 1.94 30 x 25 1.84 30 x 30 1.83 35 x 35 1.79 RFE International * Tel:(949)583-0808 * Fax:(949)583-9898 * E-Mail Sales@rfeinc.com C1CG02 REV 2004.7.29