RFE International • Tel:(949)583-0808 • Fax:(949)583-9898 • E-Mail Sales@rfeinc.com
ALUMINUM ELECTROLYTIC CAPACITORS
LS Series: Snap-In Lug and Terminal Types
FEATURES
SPECIFICATIONS
SNAP-IN TERMINAL TYPE
PART NUMBER EXAMPLE
LS 101 M 2G 220 300
Case Size (22mm X 30mm)
Rate Voltage (400V)
Capacitance tolerance (±20%)
Capacitance
(100mF)
Series name
Item
Operating
Temperature Range
Capacitance Tolerance
Leakage Current
(at 20°C)
Dissipaton Factor Rated Voltage 16 25 35 50 63 100 160 200 250 350 400 450
Tan at 120 Hz, 20°C Tan (max) 0.40 0.30 0.25 0.20 0.15 0.15 0.10* 0.10* 0.10* 0.15 0.15 0.15
Low Temperature 16 25 35 50 63 100 160 200 250 350 400 450
Characteristics (at 120Hz) Z(-25°C) /Z(+20°C) 4 3 3 2 2 2 4 4 4 4 8 8
Z(-40°C) /Z(+20°C) 15 10 8 6 6 5 4 8 10 16 18 20
The above specification shall be satisfied when the capacitors are
restored to 20°C after rated voltage applied for 2000 hrs at 85°C
Shelf Life Test
The above specification shall be satisfied when the capacitors are
restored to 20°C after exposing them for 2000 hrs at 85°C
Freq. (Hz)
Ripple Current &
W.V.(V)
Frequency Multipliers Under 100 0.92 1.00 1.13 1.19 1.20
160 and up 0.81 1.00 1.32 1.45 1.50
350 and up 0.77 1.00 1.30 1.41 1.43
Ripple Current & Temperature (°C) 40 55 70 85
Temperature Multipliers Multiplier 2.10 1.80 1.50 1.00
Standards
± 20%
I = 0.02CV or 1.5 (mA) whichever is greater (after 5 minutes)
Where, C = rated capacitance in F. V=rated DC working voltage in V.
Impedance ratio shall not exceed the values given in the table below
2000 Hrs
Satisfies Characteristic W of JIS C 5141
Capacitance Change
Capacitance Change
Less than 200% of specifiec value
± 20%
Within specified values
Less than 200% of specifiec value
Within specified values
60 120
Performance
Rated Voltage
Impedance Ratio
Test Time
*: 0.15 for D = 35mm
± 20% (120Hz, 20°C)
-40°C ~ +85°C
500 1K 10K up
Load Life Test Dissipation Factor
Leakage Current
Leakage Current
Dissipation Factor
Test Time 1000 Hrs
C1CG02
REV 2004.7.29
Has a snap-in terminal which can solder to a PCB directly and need not
fixture to save processing time.
Suitable for electronic equipment with medium-high voltage circuits.
Printed circuit board terminal snap-in type and lug terminal type available.
RFE International • Tel:(949)583-0808 • Fax:(949)583-9898 • E-Mail Sales@rfeinc.com
VDC
D
F Code
6800 682 22 x 30 2.40 22 x 40 2.80 22 x 50 3.81 25 x 50 4.27
25 x 25 2.56 25 x 30 2.74 25 x 40 3.81 30 x 40 4.27
30 x 25 2.97 30 x 35 3.85 35 x 40 4.15
8200 822 22 x 25 2.51 22 x 35 2.72 22 x 45 3.47 25 x 50 4.37 30 x 45 4.83
25 x 35 3.10 30 x 40 4.36 35 x 35 4.79
35 x 30 4.41
10000 103 22 x 30 2.54 22 x 40 3.09 22 x 50 3.57 30 x 45 4.97 30 x 50 5.49
25 x 30 2.74 25 x 30 3.12 25 x 40 3.53 35 x 35 4.92 35 x 40 5.47
30 x 25 3.21 30 x 30 3.46
35 x 25 3.20
12000 123 22 x 30 2.86 22 x 45 3.48 25 x 45 3.98 30 x 50 5.60 35 x 45 6.19
25 x 25 2.95 25 x 35 3.43 30 x 35 4.01 35 x 40 5.58
30 x 30 3.86 35 x 30 4.42
35 x 25 3.54
15000 153 22 x 35 3.29 22 x 50 4.00 30 x 40 4.52 35 x 45 6.44
25 x 30 3.46 25 x 40 3.95 35 x 35 5.01
30 x 25 3.66 30 x 35 4.12
18000 183 22 x 40 3.72 25 x 45 4.45 30 x 45 4.71
25 x 35 3.98 30 x 35 4.46 35 x 40 5.54
35 x 30 4.63
22000 223 22 x 50 4.37 30 x 45 5.21 35 x 45 6.04
25 x 40 4.26 35 x 35 5.16
30 x 30 4.21
35 x 25 4.15
DxL A/rms
DxL A/rms DxL A/rms
DxL A/rms DxL A/rms
16V 25 35 50 63
DIMENSIONS & PERMISSABLE RIPPLE CURRENT
Dimension: D×L(mm); Ripple Current: mA/RMS at 120Hz 85°C
ALUMINUM ELECTROLYTIC CAPACITORS
LS Series: Snap-In Lug and Terminal Types
VDC
D DxL A/rms DxL A/rms DxL A/rms DxL A/rms DxL A/rms
F Code
1500 152 22 x 25 1.82 22 x 35 2.41 30 x 45 3.42 30 x 50 3.70
25 x 30 2.43 30 x 40 3.42 35 x 50 4.04
30 x 25 2.46 35 x 40 3.54
35 x 35 3.54
1800 182 22 x 25 1.82 22 x 40 2.71 30 x 50 4.12 35 x 50 4.33
25 x 35 2.75 35 x 50 4.50
35 x 40 3.95
2200 222 22 x 25 1.91 22 x 30 2.31 22 x 45 3.08 35 x 50 4.74 35 x 50 4.69
25 x 40 3.13 35 x 45 4.53
30 x 30 3.09
25 x 25 2.30 35 x 25 3.14
2700 272 22 x 25 2.01 22 x 35 2.49 25 x 45 3.57
25 x 30 2.52 30 x 34 3.55
35 x 30 3.71
3300 332 22 x 30 2.37 22 x 35 2.62 25 x 50 4.06
25 x 25 2.38 25 x 30 2.64 30 x 40 4.05
30 x 25 2.78
3900 392 22 x 35 2.65 22 x 40 2.93 30 x 45 4.54
25 x 30 2.68 25 x 35 2.97 35 x 35 4.49
4700 472 22 x 30 2.41 22 x 30 2.41 22 x 40 2.99 22 x 50 3.39 30 x 50 5.13
25 x 25 2.42 25 x 25 2.42 25 x 35 3.03 25 x 40 3.36 35 x 40 5.11
30 x 25 2.81 30 x 30 3.32
35 x 25 3.36
5600 562 22 x 25 2.21 22 x 35 2.75 22 x 45 3.36 25 x 45 3.77 35 x 45 5.75
25 x 40 3.41 30 x 35 3.75
30 x 30 3.37
35 x 25 3.42
20016063 1003525 50
DxL A/rms
DxL A/rms
C1CG02
REV 2004.7.29
RFE International • Tel:(949)583-0808 • Fax:(949)583-9898 • E-Mail Sales@rfeinc.com
VDC
D
FCode
22 x 35 1.94 22 x 45 2.08 22 x 50 2.08 35 x 45 2.20 35 x 50 2.32
22 x 30 1.77 22 x 40 1.92 25 x 45 2.13 35 x 40 2.07 35 x 45 2.19
25 x 30 1.95 25 x 35 2.01 30 x 35 2.13
25 x 25 1.77 30 x 30 2.10 35 x 30 2.20
30 x 25 2.02 30 x 25 1.90 35 x 25 2.00
22 x 40 2.18 22 x 50 2.34 25 x 50 2.40 35 x 50 2.49 35 x 50 2.51
22 x 35 1.95 22 x 45 2.17 30 x 40 2.42
25 x 35 2.21 25 x 40 2.27 35 x 35 2.49
25 x 30 1.97 30 x 35 2.39 35 x 30 2.28
30 x 25 2.14 30 x 30 2.18
35 x 25 2.30
22 x 50 2.54 22 x 50 2.57 30 x 45 2.72
22 x 40 2.20 25 x 45 2.63 35 x 40 2.87
25 x 40 2.47 30 x 40 2.77 35 x 35 2.60
25 x 35 2.24 30 x 35 2.55
30 x 30 2.44 35 x 35 2.87
30 x 25 2.18 35 x 30 2.63
35 x 25 2.50
22 x 40 2.20 25 x 50 2.96 30 x 50 3.07
25 x 45 2.88 30 x 45 3.13 35 x 45 3.18
25 x 40 2.62 30 x 40 2.90 35 x 40 2.96
30 x 35 2.87 35 x 35 3.09
30 x 30 2.58
35 x 30 2.96
35 x 25 2.64
22 x 30 2.09 25 x 50 3.30 30 x 50 3.43 35 x 50 3.71
25 x 25 2.10 25 x 25 3.02 30 x 45 3.17
30 x 40 3.32 35 x 40 3.40
30 x 35 3.01 35 x 35 3.12
35 x 35 3.43
35 x 30 3.10
1000 102
1200 122
680 681
250
820 821
100
DxL A/rms
560 561
DxL A/rms
350 400
DxL A/rms DxL A/rms
200160
DxL A/rms DxL A/rms
ALUMINUM ELECTROLYTIC CAPACITORS
LS Series: Snap-In Lug and Terminal Types
DIMENSIONS & PERMISSABLE RIPPLE CURRENT
Dimension: D×L(mm); Ripple Current: mA/RMS at 120Hz 85°C
C1CG02
REV 2004.7.29
RFE International • Tel:(949)583-0808 • Fax:(949)583-9898 • E-Mail Sales@rfeinc.com
ALUMINUM ELECTROLYTIC CAPACITORS
LS Series: Snap-In Lug and Terminal Types
DIMENSIONS & PERMISSABLE RIPPLE CURRENT
Dimension: D×L(mm); Ripple Current: mA/RMS at 120Hz 85°C
VDC
D
FCode
56 560 22 x 25 0.49
22 x 25 0.54 22 x 30 0.59
22 x 25 0.53
22 x 25 0.60 22 x 25 0.60 22 x 30 0.64
25 x 25 0.64
22 x 25 0.66 22 x 30 0.71 22 x 35 0.72
22 x 25 0.71 25 x 30 0.68
22 x 35 0.83 22 x 40 0.78
25 x 35 0.78 25 x 35 0.79
25 x 30 0.73
30 x 25 0.77
22 x 25 0.95 22 x 25 0.95 22 x 25 0.91 22 x 35 0.83 22 x 40 0.90 22 x 50 0.94
25 x 30 0.84 22 x 35 0.84 22 x 45 0.88
30 x 25 0.87 25 x 30 0.86 25 x 40 0.92
30 x 25 0.89 25 x 35 0.85
30 x 30 0.91
22 x 25 1.04 22 x 25 1.04 22 x 25 1.01 22 x 40 0.99 22 x 45 1.02 22 x 50 1.07
25 x 35 1.01 22 x 40 0.96 25 x 45 1.10
25 x 30 0.92 25 x 35 0.98 25 x 40 1.02
30 x 25 0.98 30 x 30 1.03 30 x 35 1.10
30 x 25 0.94 30 x 30 1.01
35 x 25 1.05 35 x 30 1.13
22 x 25 1.15 22 x 25 1.15 22 x 35 1.27 22 x 45 1.14 22 x 50 1.15 25 x 50 1.27
22 x 30 1.16 25 x 40 1.14 25 x 40 1.12 25 x 45 1.19
25 x 25 1.19 25 x 35 1.05 30 x 35 1.18 30 x 40 1.28
30 x 30 1.12 30 x 30 1.08 30 x 35 1.18
35 x 25 1.13 35 x 30 1.25
22 x 25 1.27 22 x 25 1.27 22 x 35 1.38 22 x 50 1.27 25 x 45 1.28 30 x 45 1.41
22 x 30 1.26 25 x 45 1.30 30 x 40 1.35 30 x 40 1.32
25 x 25 1.29 25 x 40 1.21 30 x 35 1.25 35 x 35 1.39
30 x 35 1.29 35 x 30 1.31
35 x 30 1.33
35 x 25 1.21
22 x 25 1.40 22 x 30 1.43 22 x 40 1.53 25 x 50 1.53 25 x 50 1.46 30 x 50 1.63
25 x 25 1.43 22 x 35 1.40 30 x 40 1.45 30 x 45 1.53 35 x 45 1.70
25 x 30 1.46 35 x 30 1.50 30 x 40 1.44 35 x 40 1.59
30 x 25 1.51 35 x 35 1.51
35 x 30 1.40
22 x 30 1.62 22 x 35 1.63 22 x 45 1.72 30 x 45 1.65 30 x 50 1.83 30 x 50 1.77
22 x 30 1.50 22 x 40 1.57 30 x 40 1.55 30 x 45 1.73 35 x 50 1.94
25 x 30 1.67 25 x 35 1.64 35 x 35 1.63 35 x 40 1.82
25 x 25 1.50 30 x 30 1.72 35 x 35 1.70
30 x 25 1.55
22 x 30 1.73 22 x 40 1.87 22 x 50 1.91 30 x 50 1.93 30 x 50 1.99 35 x 50 2.13
25 x 25 1.75 22 x 35 1.71 22 x 45 1.77 30 x 45 1.81 35 x 45 2.07
25 x 30 1.78 25 x 40 1.86 35 x 40 1.92 35 x 40 1.94
30 x 25 1.84 30 x 30 1.83 35 x 35 1.79
200160
A/rms
450
DxL A/rms
DxL A/rms DxL A/rms DxL A/rms
250 350 400
390 391
470 471
270 271
330 331
120 121
150 151
180 181
220 221
82
820
100 101
DxL
A/rms
DxL
68 680
C1CG02
REV 2004.7.29