relays SOCKETS FOR C2 RELAYS * Built in retaining clip * Removable label marking facility * Coding ring compatible * One or two level terminals * DIN rail, solder tag or PCB mount S2-B S2-S One level. S2-L Two level. Integrated clip and marking label Integrated clip and marking label Accepts the exclusive Releco coding ring for coding both the relay and base. DIN rail or panel mountable. Removable label. EN/DIN and sequential numbering. According to EN60947 Accepts the exclusive Releco coding ring for coding both the relay and base. DIN rail or panel mountable. Removable label. EN/DIN and sequential numbering. According to EN60947 Wiring diagram Wiring diagram S2-PO 8 pin, solder and printed circuit tags S2-L Flange panel mountable. S2-PO Printed circuit tags with flange. Printed circuit lay-out 45 6 ( 24 ) 5 ( 22 ) 1 ( 11 ) 4 ( 12 ) 2 ( A1) 3 ( 14 ) Specifications 8 ( 21 ) 6 ( 24 ) o1.3 5 ( 22 ) 2 ( A1) 3 ( 14 ) 1( 11 ) S2-B 3 8 1 Specifications Nominal load 10A/300V Dielectric strength (adjacent screws) 2,5 KV Dielectric strength (screws/rail) 2,5 KV Max. screw torque 1,2 Nm Screw dimensions M3, Pozi Wire in-lets capacity: Solid wire 4 mm2 or 2 x 2,25 mm2 Multi-core 22 - 14 AWG o8.2 S2-S Nominal load 10 A/300 V Dielectric strength (adjacent pin) 2,5 KV Hard brass, tin-plated terminals S2-L S2-PO 6 38 7.2 24 25 3.4 o8.2 2 7 4 ( 12 ) Specifications Nominal load 10A/300V Dielectric strength (adjacent screws) 2,5 KV Dielectric strength (screws/rail) 2,5 KV Max. screw torque 1,2 Nm Screw dimensions M3, Pozi Wire in-lets capacity: Solid wire 4 mm2 or 2 x 2,25 mm2 Multi-core 22 - 14 AWG 4 5 6 17.5 7 ( A2 ) 8 ( 21 ) 7 ( A2 ) o5.3 o 5.3 39 49 4 8 M3 10 M3 M3.5 o29.5 7 L 2 4 12 3 14 1 11 2 A1 S2-PO 15 10 15 4 3 S2-S PO 4.7 1 38 30 38 4 29.75 5 22 6 24 5 Label 5 RELECO 7 6 24 22 12 14 2 S3-B 2 S2-BC 8 21 7 A2 7 1 A2 21 11 A1 8 RELECO 7 68 S2-L 80 Coding Ring Can be used to code a specific relay to fit a specific socket up to 8 combinations. Supplied in a pack of 5 pieces. 138 0800 731 3186 www.oem.co.uk