SPECIFICATION CONTROL DRAWING MATERIALS 1. INSULATION SLEEVE: Heat-Shrinkable, transparent blue, radiation cross-linked modified polyvinylidene fluoride. 2. SOLDER PREFORM WITH FLUX: SOLDER: TYPE Pb36 per ANSI-J-STD-006. FLUX: TYPE ROL1 per ANSI-J-STD-004. APPLICATION 1. This controlled soldering device is designed for termination of a tin or silver plated copper shield on a cable having an insulation rated for at least +125C. 2. Temperature range: -55C to +150C. For application tooling, consult your local Raychem technical service. For best results, prepare the cable as shown: * A trademark of Raychem Corporation. Raychem THERMOFIT DEVICES Raychem Corporation 300 Constitution Drive Menlo Park, CA 94025 USA UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS. TOLERANCES: 0.00 N/A 0.0 N/A 0 N/A DRAWN BY: Raychem reserves the right to amend this drawing at any time. Users should evaluate the suitability of the product for their ROUGHNESS IN application. MICRON DATE: PROD. REV. ANGLES: N/A F M. FORONDA 06/23/98 If this document is printed it becomes uncontrolled. Check with the web for latest revision. TITLE: SHIELD TERMINATION DOCUMENT NO: B-004-00 DCR NUMBER: REPLACES: D980561 DOC ISSUE: 1 SCALE: None B00400 SIZE: A SHEET: 1 of 1