No. P-251-007 DATE 2008-10 PRODUCTS DATA SHEET Face-down terminal structure TANTALUM SOLID ELECTROLYTIC CAPACITOR RoHS COMPLIANT LEAD FREE Type 251 To meet the users' demands for smaller and high-function portable information devices, we developed compact and low profile tantalum capacitors with appropriately designed mounting area for high-density mounting ahead of other companies. The capacitors are widely used in portable information and telecommunication equipment, such as mobile phones and PHS, digital video cameras, digital still cameras and portable AV equipment. The tantalum capacitors designed for high-density mounting will considerably contribute to miniaturization and improvement of performance of these portable multimedia devices. FEATURES 1. Using the face-down terminal structure makes it possible to design the land in almost the same size as the terminal. As the result of this, parts can be downsized, and the mounting area can be reduced to 1/2 to 1/3 of that required by conventional structures. 2. Type 251 in size 1005 to 3528L are applicable to a wide capacitance range from 1 to 330 F. 3. This type of capacitors is suitable for ultra miniaturized, such as DVC, DSC and PCMCIA cards, and high-function compact portable devices, such as mobile phones and PHS. 4. Case M (face-down terminal type 1608) and case S (face-down terminal type 2012) of this type are listed in the Surface Mounting DeviceOutline Registration System of Electronic Device Registration Center of JEITA. 5. Lead-free and RoHS Compliant. RATING Remarks Rating Item Category Temperature Range (Operating Temperature Range) -55 ~ +125C Rated Temperature (Max. Operating Temp. at Rated Voltage) +85C Rated Voltage 2.0 ~ 35 VDC To be used at derated voltage when temperature exceeds 85C (At 125C, 2/3 x rated voltage) See CATALOG NUMBERS AND RATING OF STANDARD Capacitance 1.0 ~ 330 F Capacitance Tolerance 20%(M), 10%(K) Failure Rate Level 1%/1000 h PRODUCTS or LOW PROFILE PRODUCTS. 85C, rated voltage, 1000 hrs., Circuit resistance of 0.5 /V DIMENSIONS [STANDARD PRODUCTS] W L Case Code U M S A B T P1 P2 EIA Code 1005 1608 2012 3216L 3528L (mm) Max. height 0.55 0.9 1.2 1.2 1.2 L 0.1 1.05 0.05 1.6 2.0 3.2 3.5 W 0.1 0.55 0.05 0.85 1.25 1.6 2.8 T 0.1 0.5 0.05 0.8 1.1 1.1 1.1 P1 0.1 0.3 0.5 0.5 0.8 0.8 P2 0.1 0.45 0.65 1.05 1.65 1.95 C 0.1 0.4 0.7 0.9 1.2 2.2 L 0.1 2.0 3.2 3.5 W 0.1 1.25 1.6 2.8 T 0.1 0.9 0.9 0.9 P1 0.1 0.5 0.8 0.8 P2 0.1 1.05 1.65 1.95 C 0.1 0.9 1.2 2.2 [LOW PROFILE PRODUCTS] P1 Case Code S A B C EIA Code 2012 3216L 3528L (mm) Max. height 1.0 1.0 1.0 [CUSTOM PRODUCTS] (mm) Max. height L 0.1 W 0.1 T 0.1 P1 0.1 P2 0.1 C 0.1 1.3 2.0 1.25 1.2 0.5 1.05 0.9 0.9 3.2 1.6 0.8 0.8 1.65 1.2 A 3216L 1.3 3.2 1.6 1.2 0.8 1.65 1.2 The component height varies according to rating. For the details, see CATALOG NUMBERS AND RATING OF STANDARD PRODUCTS, LOW PROFILE PRODUCTS or CUSTOM PRODUCTS. Case Code S EIA Code 2012 ORDERING INFORMATION 251 M 4001 107 M R 0 TYPE SERIES RATED VOLTAGE CAPACITANCE CAPACITANCE TOLERANCE STYLE OF REELED PACKAGE HEIGHT S CASE CODE (Taping specification) Marking 2001 2501 3001 4001 6301 1002 1602 2002 2502 3502 Rated voltage 2 VDC 2.5 VDC 3 VDC 4 VDC 6.3 VDC 10 VDC 16 VDC 20 VDC 25 VDC 35 VDC Marking 105 155 225 335 475 685 106 156 226 336 476 686 107 157 227 337 Code R Capacitance 1 F 1.5 F 2.2 F 3.3 F 4.7 F 6.8 F 10 F 15 F 22 F 33 F 47 F 68 F 100 F 150 F 220 F 330 F Reel size f180 Anode notation Feed hole: - Case code U M S A B Max. height (mm) 0.55 0.9 1.3 1.2 1.0 1.3 1.2 1.0 0.9 1.2 1.0 EIA Code 1005 1608 2012 3216L 3528L Case code U M S A B Height code Blank Blank 3 2 0 3 2 0 9 2 0 MARKING [Case U (1005)] (1) The rated voltage is indicated with one alphabetic letter. [Case M (1608)] Rated Voltage (1) Rated voltage (VDC) 2.5 4 6.3 10 16 20 25 35 Rated voltage code e G J A C D E V The rated voltage of case A, B is indicated with a small letter g (4 V) or j (6.3 V). Polarity (anode notation) Mark anode notation only. Polarity (anode notation) [Case A (3216L), Case B (3528L)] [Case S (2012)] Capacitance (2) Rated Voltage (1) Capacitance Tolerance Without bar : 20% With bar : 10% Polarity (anode notation) g (2) The capacitance is indicated with one alphabetic letter or the alphabetic letter with an overbar or underbar. Capacitance (F) 1 1.5 2.2 3.3 4.7 6.8 Code A E J N S _ W To indicate a capacitance not listed above, _ (1/10), (10 times) or = (100 times) is used. (Ex.: J indicates 1/10 of J (2.2), 0.22). Capacitance (3) Rated Voltage (1) Capacitance Tolerance Without bar : 20% With bar : 10% Polarity (anode notation) -- (3) The capacitance is indicated with one alphabetic letter and one numeral. Code A6 E6 J6 N6 S6 Capacitance (F) 1.0 1.5 2.2 3.3 4.7 6.8 Code A7 E7 J7 N7 S7 W7 W6 Capacitance (F) 10 15 22 33 47 68 Code A8 E8 J8 N8 S8 W8 Capacitance (F) 100 150 220 330 470 680 CATALOG NUMBERS AND RATING OF STANDARD PRODUCTS Catalog number 251 251 251 251 251 251 251 251 251 251 251 251 251 251 251 251 251 251 251 251 251 251 251 251 251 251 251 251 251 251 251 251 251 251 251 251 251 251 251 251 251 251 251 251 251 251 251 251 251 251 251 251 251 251 251 251 251 251 251 251 251 251 251 251 251 251 251 251 251 251 251 251 251 251 251 251 251 251 251 251 M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M 2001 2001 2501 2501 2501 2501 2501 3001 3001 4001 4001 4001 4001 4001 4001 4001 4001 4001 4001 4001 4001 4001 4001 4001 4001 4001 4001 4001 6301 6301 6301 6301 6301 6301 6301 6301 6301 6301 6301 6301 6301 6301 6301 6301 6301 6301 6301 1002 1002 1002 1002 1002 1002 1002 1002 1002 1002 1002 1002 1002 1002 1002 1002 1602 1602 1602 1602 1602 2002 2002 2002 2002 2002 2502 2502 2502 2502 2502 3502 3502 475 106 106 107 157 227 337 225 106 105 155 225 335 475 475 685 685 106 106 156 226 336 476 686 107 157 227 227 105 105 155 225 225 335 335 475 475 685 106 156 226 226 336 476 686 107 157 105 105 155 155 225 225 335 475 685 106 106 156 226 336 476 107 105 155 225 685 106 105 155 225 335 475 105 155 225 335 475 105 225 (1) (2) M _2 U M _2 U M _2 U M _2 2S M _2 2S M _2 2S M _2 2A M _2 U M _2 U M _2 M M _2 M M _2 M M _2 M _1 _2 U M _2 M M _2 U M _2 M M _2 U M _2 M M _2 M _1 _2 M M _2 M M _2 2S M _2 2S M _2 2S M _2 2A _1 _2 2A M _2 2B _1 _2 U M _2 M M _2 M M _2 U M _2 M M _2 U M _2 M M _2 U M _2 M M _2 M M _2 M M _2 M M _2 M M _2 2S M _2 2S M _2 2S M _2 2S M _2 2A M _2 2B _1 _2 U M _2 M M _2 U M _2 M M _2 U M _2 M M _2 M M _2 M M _2 M M _2 M M _2 2S M _2 2S M _2 2S M _2 2A M _2 2A M _2 2B M _2 M M _2 M M _2 M M _2 2S M _2 2S M _2 2S M _2 2S M _2 2S M _2 2A M _2 2A M _2 2S M _2 2S M _2 2A M _2 2A M _2 2A M _2 2S M _2 2A Rated Surge voltage Capacitance Tolerance Case (VDC) voltage (F) (%) code (VDC) 85C 125C 2 2.3 1.5 2.5 2.8 1.9 3 3.45 2.3 4 4.6 3 6.3 10 7.2 11.5 4.8 7.6 16 18.4 12.2 20 23 15.3 25 28.7 19.1 35 40.2 26.8 4.7 10 10 100 150 220 330 2.2 10 1 1.5 2.2 3.3 4.7 4.7 6.8 6.8 10 10 15 22 33 47 68 100 150 220 220 1 1 1.5 2.2 2.2 3.3 3.3 4.7 4.7 6.8 10 15 22 22 33 47 68 100 150 1 1 1.5 1.5 2.2 2.2 3.3 4.7 6.8 10 10 15 22 33 47 100 1 1.5 2.2 6.8 10 1 1.5 2.2 3.3 4.7 1 1.5 2.2 3.3 4.7 1 2.2 20 20 20 20 20 20 20 20 20 20 20 20 20 10, 20 20 20 20 20 20 20 10, 20 20 20 20 20 20 10, 20 20 10, 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 10, 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 U U U S S S A U U M M M M U M U M U M M M M S S S A A B U M M U M U M U M M M M M S S S S A B U M U M U M M M M M S S S A A B M M M S S S S S A A S S A A A S A Capacitance change (C/C) (%) Lct. (A) 20C 0.5 0.5 0.5 2.5 3.7 5.5 8.2 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.6 0.9 1.3 1.9 2.7 4.0 6.0 8.8 8.8 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.6 0.9 1.4 1.4 2.1 3.0 4.2 6.3 9.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.7 1.0 1.0 1.5 2.2 3.3 4.7 10 0.5 0.5 0.5 1.1 1.6 0.5 0.5 0.5 0.7 0.9 0.5 0.5 0.6 0.8 1.2 0.5 0.8 Max. Dissipation factor ESR 85C 125C -55C 85C 125C -55C 20C 85C 125C 100 kHz 5 5 5 50 75 110 165 5 5 5 5 5 5 5 5 5 5 5 8 12 18 26 38 54 80 120 176 176 5 5 5 5 5 5 5 5 5 5 6 19 28 14 42 59 85 126 189 5 5 5 5 5 5 5 5 14 20 10 15 44 66 94 200 5 5 5 22 32 5 5 5 6.6 9.4 5 5 5.5 8 12 5 8 -30/0 -30/0 -30/0 -30/0 -30/0 -30/0 -30/0 -30/0 -30/0 -15/0 -15/0 -15/0 -15/0 -30/0 -15/0 -30/0 -15/0 -30/0 -15/0 -30/0 -15/0 -30/0 -15/0 -30/0 -30/0 -30/0 -30/0 -30/0 -30/0 -15/0 -15/0 -30/0 -15/0 -30/0 -15/0 -30/0 -15/0 -15/0 -15/0 -30/0 -30/0 -30/0 -30/0 -30/0 -30/0 -30/0 -30/0 -30/0 -15/0 -30/0 -15/0 -30/0 -15/0 -15/0 -15/0 -30/0 -30/0 -15/0 -30/0 -30/0 -30/0 -30/0 -30/0 -15/0 -15/0 -15/0 -15/0 -30/0 -15/0 -15/0 -15/0 -15/0 -15/0 -15/0 -15/0 -15/0 -15/0 -15/0 -15/0 -15/0 0/+20 0/+20 0/+20 0/+20 0/+20 0/+20 0/+20 0/+20 0/+20 0/+10 0/+10 0/+10 0/+10 0/+20 0/+10 0/+20 0/+10 0/+20 0/+10 0/+20 0/+10 0/+20 0/+10 0/+20 0/+20 0/+20 0/+20 0/+20 0/+20 0/+10 0/+10 0/+20 0/+10 0/+20 0/+10 0/+20 0/+10 0/+10 0/+10 0/+20 0/+20 0/+20 0/+20 0/+20 0/+20 0/+20 0/+20 0/+20 0/+10 0/+20 0/+10 0/+20 0/+10 0/+10 0/+10 0/+20 0/+20 0/+10 0/+20 0/+20 0/+20 0/+20 0/+20 0/+10 0/+10 0/+10 0/+10 0/+20 0/+10 0/+10 0/+10 0/+10 0/+10 0/+10 0/+10 0/+10 0/+10 0/+10 0/+10 0/+10 0/+20 0/+20 0/+20 0/+20 0/+20 0/+20 0/+20 0/+20 0/+20 0/+15 0/+15 0/+15 0/+15 0/+20 0/+15 0/+20 0/+15 0/+20 0/+15 0/+20 0/+15 0/+20 0/+15 0/+20 0/+20 0/+20 0/+20 0/+20 0/+20 0/+15 0/+15 0/+20 0/+15 0/+20 0/+15 0/+20 0/+15 0/+15 0/+15 0/+20 0/+20 0/+20 0/+20 0/+20 0/+20 0/+20 0/+20 0/+20 0/+15 0/+20 0/+15 0/+20 0/+15 0/+15 0/+15 0/+20 0/+20 0/+15 0/+20 0/+20 0/+20 0/+20 0/+20 0/+15 0/+15 0/+15 0/+15 0/+20 0/+15 0/+15 0/+15 0/+15 0/+15 0/+15 0/+15 0/+15 0/+15 0/+15 0/+15 0/+15 0.36 0.45 0.45 0.40 0.12 0.15 0.15 0.20 0.24 0.30 0.30 0.24 0.30 0.30 15 0.60 0.30 0.18 0.45 0.16 0.06 0.15 0.08 0.36 0.40 0.12 0.30 0.16 0.36 0.40 0.12 0.30 0.16 2 1 15 0.36 0.12 0.36 0.15 0.45 0.15 0.30 0.24 0.12 0.24 0.15 0.30 0.15 0.30 0.24 0.12 0.24 0.15 0.30 0.15 0.30 0.40 0.30 0.40 0.12 0.06 0.12 0.08 0.15 0.08 0.20 0.106 0.20 0.15 0.20 0.48 0.24 0.32 0.18 0.16 0.16 0.06 0.08 0.32 0.12 0.16 0.32 0.12 0.16 0.18 0.16 0.30 0.16 0.36 0.12 0.15 0.06 0.08 0.10 0.08 0.12 0.06 0.08 0.12 0.16 0.20 0.16 0.24 0.12 0.15 0.12 0.16 0.20 0.16 0.24 0.12 0.15 0.30 0.40 0.30 0.20 0.30 0.30 0.36 0.28 0.18 0.16 0.18 0.16 0.18 0.16 0.18 0.14 0.06 0.08 0.06 0.08 0.06 0.08 0.32 0.28 0.12 0.16 0.12 0.16 0.12 0.16 0.32 0.28 0.12 0.16 0.12 0.16 0.12 0.16 0.12 0.30 0.06 0.20 0.12 0.30 0.12 0.30 10 8 0.16 0.30 0.08 0.15 0.16 0.30 0.16 0.30 4 0.24 0.28 0.20 0.16 0.12 0.14 0.10 0.08 0.24 0.28 0.20 0.16 0.24 0.28 0.20 0.16 2 0.14 0.10 0.10 0.05 0.10 0.10 0.12 0.10 0.12 0.06 0.12 0.12 0.12 0.06 0.12 0.12 6 4 6 0.10 0.12 0.05 0.06 0.10 0.12 0.10 0.12 4 8 6 6.3 6.3 6.3 62 93 137 206 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 10 15 22 33 47 68 100 150 220 220 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 7.9 24 35 17 52 74 107 157 236 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 17 25 13 19 55 82 117 250 6.3 6.3 6.3 27 40 6.3 6.3 6.3 8.3 12 6.3 6.3 6.9 10 15 6.3 9.6 15 4 15 10 15 8 15 8 4 4 2 1 15 10 8 4 0.15 0.8 2 1 15 1 15 2 8 October, 2008 Rapid change of Resistance to temperature high Endurance soldering heat temperature/Moisture C/C Lct. C/C C/C% C/C% (3) % % 20 B 30 20 20 20 B 30 20 20 20 B 30 20 20 20 A 30 20 20 20 B 30 20 20 20 B 30 20 20 20 B 30 20 20 20 B 30 20 20 20 B 30 20 20 15 A 15 15 15 15 A 15 15 15 15 A 15 15 15 15 A 15 15 15 20 B 30 20 20 15 A 15 15 15 20 B 30 20 20 15 A 15 15 15 20 B 30 20 20 15 A 15 15 15 20 B 30 20 20 15 A 15 15 15 20 B 30 20 20 15 A 15 15 15 20 B 30 20 20 20 B 30 20 20 20 B 30 20 20 20 B 30 20 20 20 B 30 20 20 20 B 30 20 20 15 A 15 15 15 15 A 15 15 15 20 B 30 20 20 15 A 15 15 15 20 B 30 20 20 15 A 15 15 15 20 B 20 20 20 15 A 15 15 15 15 A 15 15 15 15 A 15 15 15 20 B 30 20 20 20 B 30 20 20 20 A 30 20 20 20 B 30 20 20 20 B 30 20 20 20 B 30 20 20 20 B 30 20 20 20 B 30 20 20 20 B 30 20 20 15 A 15 15 15 20 B 30 20 20 15 A 15 15 15 20 B 30 20 20 15 A 15 15 15 15 A 15 15 15 15 A 15 15 15 20 B 30 20 20 20 B 30 20 20 15 A 15 15 15 20 A 30 20 20 20 B 30 20 20 20 B 30 20 20 20 B 30 20 20 20 B 30 20 20 15 A 15 15 15 15 A 15 15 15 15 A 15 15 15 15 A 15 15 15 20 B 30 20 20 15 A 15 15 15 15 A 15 15 15 15 A 15 15 15 15 A 15 15 15 15 A 15 15 15 15 A 15 15 15 15 A 15 15 15 15 A 15 15 15 15 A 15 15 15 15 A 15 15 15 15 A 15 15 15 15 A 15 15 15 Surge Lct. (3) B B B B B B B B B A A A A B A B A B A B A B A B B B B B B A A B A B A B A A A B B A B B B B B B A B A B A A A B B A A B B B B A A A A B A A A A A A A A A A A A Notes (1) _1: Permissible tolerance K ( 10%) or M ( 20%) (2) _2: No code for single item. "R" for taping specification. (3) Lct. A: Not exceeding the initial specification, B: Not exceeding twice the initial specification CATALOG NUMBERS AND RATING OF LOW PROFILE PRODUCTS Capacitance change Rated Surge voltage Lct. (A) Capacitance Tolerance Case (VDC) (C/C) (%) voltage (F) (%) code (VDC) 85C 125C 20C 85C 125C -55C 85C 125C 100 1.9 2.8 2.5 251 M 2501 107 M _2 0S 20 S 2.5 50 62 -30/0 0/+20 0/+20 2 47 3 4.6 4 251 M 4001 476 M _ 0S 20 S 1.9 38 47 -30/0 0/+20 0/+20 68 251 M 4001 686 M _2 0S 20 S 2.7 54 68 -30/0 0/+20 0/+20 100 251 M 4001 107 M _2 0S 20 S 4.0 80 100 -30/0 0/+20 0/+20 100 251 M 4001 107 M _2 0A 20 A 4.0 80 100 -30/0 0/+20 0/+20 150 251 M 4001 157 M _2 0A 20 A 6.0 120 150 -30/0 0/+20 0/+20 220 251 M 4001 227 M _2 0A 20 A 8.8 176 220 -30/0 0/+20 0/+20 4.8 22 7.2 6.3 251 M 6301 226 M _2 0S 20 S 1.4 28 35 -30/0 0/+20 0/+20 33 251 M 6301 336 M _2 0S 20 S 2.1 42 52 -30/0 0/+20 0/+20 47 251 M 6301 476 M _2 0S 20 S 3.0 59 74 -30/0 0/+20 0/+20 47 251 M 6301 476 M _2 0A 20 A 3.0 59 74 -30/0 0/+20 0/+20 68 251 M 6301 686 M _2 0A 20 A 4.2 85 107 -30/0 0/+20 0/+20 100 251 M 6301 107 M _2 0A 20 A 6.3 126 157 -30/0 0/+20 0/+20 7.6 11.5 10 10 251 M 1002 106 M _2 0S 20 S 1.0 20 25 -30/0 0/+20 0/+20 251 M 1002 156 M _2 0S 15 20 S 1.5 30 38 -30/0 0/+20 0/+20 251 M 1002 226 M _2 0S 22 20 S 2.2 44 55 -30/0 0/+20 0/+20 251 M 1002 336 M _2 0A 33 20 A 3.3 66 82 -30/0 0/+20 0/+20 251 M 1002 476 M _2 0A 47 20 A 4.7 94 117 -30/0 0/+20 0/+20 12.2 18.4 16 251 M 1602 685 M _2 0S 6.8 20 S 1.1 22 27 -30/0 0/+20 0/+20 251 M 1602 106 M _2 0S 10 20 S 1.6 32 40 -30/0 0/+20 0/+20 15.3 23 20 251 M 2002 335 M _2 0A 3.3 20 A 0.7 6.6 8.3 -15/0 0/+10 0/+15 251 M 2002 475 M _2 0A 4.7 20 A 0.9 9.4 12 -15/0 0/+10 0/+15 19.1 28.7 25 251 M 2502 225 M _2 0A 2.2 20 A 0.6 5.5 6.9 -15/0 0/+10 0/+15 251 M 2502 335 M _2 0A 3.3 20 A 0.8 8 10 -15/0 0/+10 0/+15 251 M 2502 475 M _2 0A 4.7 20 A 1.2 12 15 -15/0 0/+10 0/+15 251 M 2502 685 M _2 0B 6.8 20 B 1.7 17 21 -15/0 0/+10 0/+15 251 M 2502 106 M _2 0B 10 20 B 2.5 25 31 -15/0 0/+10 0/+15 26.8 40.2 35 251 M 3502 225 M _2 0A 2.2 20 A 0.8 8 9.6 -15/0 0/+10 0/+15 1 Notes (1) _ : Permissible tolerance K ( 10%) or M ( 20%) (2) _2: No code for single item. "R" for taping specification. (3) Lct. A: Not exceeding the initial specification, B: Not exceeding twice the initial specification Catalog number (1) (2) -- ESR 85C 125C 100 kHz 4 0.30 0.30 4 0.30 0.30 Max. Dissipation factor -55C 0.40 0.30 0.40 20C 0.20 0.15 0.20 0.36 0.48 0.18 0.24 0.30 0.15 0.30 0.30 4 0.28 0.32 0.36 0.30 0.14 0.16 0.18 0.15 0.28 0.32 0.28 0.32 2 0.30 0.30 4 0.24 0.28 0.14 0.12 0.14 0.10 0.24 0.28 0.10 0.24 0.28 0.12 2 0.12 0.06 0.12 0.12 0.12 0.06 0.12 0.12 2 4 2 6 4 6 4 1 0.12 0.06 0.12 0.12 6 Rapid change of Resistance to temperature high Endurance soldering heat temperature/Moisture C/C Lct. C/C C/C% C/C% (3) % % A 20 30 20 20 B 20 30 20 20 B 20 30 20 20 B 20 30 20 20 B 20 30 20 20 B 20 30 20 20 B 20 30 20 20 B 20 30 20 20 B 20 30 20 20 B 20 30 20 20 B 20 30 20 20 B 20 30 20 20 B 20 30 20 20 B 20 30 20 20 B 20 30 20 20 B 20 30 20 20 B 20 30 20 20 B 20 30 20 20 B 20 30 20 20 B 20 30 20 20 A 15 15 15 15 A 15 15 15 15 A 15 15 15 15 A 15 15 15 15 A 15 15 15 15 A 15 15 15 15 A 15 15 15 15 A 15 15 15 15 Surge Lct. (3) B B B B B B B B B B B B B B B B B B B B A A A A A A A A October, 2008 CATALOG NUMBERS AND RATING OF CUSTOM PRODUCTS Catalog number 251 251 251 251 251 251 251 251 M M M M M M M M 4001 4001 4001 6301 1002 1002 1602 2502 157 227 227 107 336 686 156 475 M M M M M M M M Rated Surge voltage Capacitance Tolerance Case (VDC) voltage (F) (%) code (VDC) 85C 125C (1) (2) _2 _2 _2 _2 _2 _2 _2 _2 3S 3S 3A 3S 3S 3A 3S 9A 4 4.6 3 6.3 10 7.2 11.5 4.8 7.6 16 25 18.4 28.7 12.2 19.1 20 20 20 20 20 20 20 20 150 220 220 100 33 68 15 4.7 Capacitance change (C/C) (%) Lct. (A) 20C 6.0 44 8.8 6.3 3.3 6.8 2.4 1.2 S S A S S A S A 85C 125C 150 220 220 157 82.5 170 60 15 120 176 176 126 66 136 48 12 Max. Dissipation factor October, 2008 ESR -55C 85C 125C -55C 20C 85C 125C 100 kHz -30/0 -30/0 -30/0 -30/0 -30/0 -30/0 -30/0 -15/0 0/+20 0/+20 0/+20 0/+20 0/+20 0/+20 0/+20 0/+10 0/+20 0/+20 0/+20 0/+20 0/+20 0/+20 0/+20 0/+15 0.48 0.80 0.48 0.48 0.30 0.24 0.40 0.24 0.30 0.15 0.12 0.12 0.06 0.30 0.50 0.30 0.30 0.30 0.24 0.12 0.12 0.18 0.12 0.30 0.50 0.30 0.30 0.30 0.24 0.14 0.12 2 2 4 2 1.5 4 Rapid change of Resistance to Surge temperature high Endurance soldering heat temperature/Moisture Lct. C/C Lct. C/C C/C% C/C% (3) (3) % % 20 30 B B 20 20 40 40 B B 40 40 20 20 B B 20 20 B 20 35 B 20 30 B 20 30 B 20 20 B 20 30 B 20 20 B 20 30 B 20 20 A 15 15 A 15 15 Notes (1) _1: Permissible tolerance K ( 10%) or M ( 20%) (2) _2: No code for single item. "R" for taping specification. (3) Lct. A: Not exceeding the initial specification, B: Not exceeding twice the initial specification STANDARD RATING R.V. (VDC) Cap. (F) 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 68 100 150 220 330 2 2.5 October, 2008 3 U U U U U S S S A 4 6.3 10 16 20 25 35 M M M M U, M U, M U, M M M M S S S A A, B U, M M U, M U, M U, M M M M M, S S S S A B U, M U, M U, M M M M M, S S S A A M M M S S S A A S S A A A S 20 25 35 A(1.0) A(1.0) A(1.0) B(1.0) B(1.0) A(1.0) 25 35 LOW PROFILE PRODUCT RATING R.V. (VDC) 2 2.5 3 4 6.3 Cap. (F) 1.0 1.5 2.2 3.3 4.7 6.8 10 15 S(1.0) 22 S(1.0) 33 S(1.0), A(1.0) S(1.0) 47 A(1.0) S(1.0) 68 A(1.0) S(1.0), A(1.0) S(1.0) 100 A(1.0) 150 A(1.0) 220 330 The parenthesized values show the component heights (maximum values in mm). CUSTOM PRODUCTS RATING A S S B October, 2008 10 16 A(1.0) A(1.0) S(1.0) S(1.0) S(1.0) A(1.0) A(1.0) S(1.0) S(1.0) October, 2008 R.V. (VDC) 2 2.5 3 4 6.3 Cap. (F) 2.2 3.3 4.7 6.8 10 15 22 33 47 68 S(1.3) 100 S(1.3) 150 S(1.3), A(1.3) 220 330 The parenthesized values show the component heights (maximum values in mm). 10 16 20 A(0.9) S(1.3) S(1.3) A(1.3) RECOMMENDED PAD DIMENSIONS STRUCTURE (TYPICAL) Cathode layer b Resin case c Tantalum wire a Tantalum element (mm) Case size U M S A B EIA Code 1005 1608 2012 3216L 3528L a b c More than 0.30 More than 0.50 More than 0.50 More than 0.80 More than 0.80 0.3 0.65 0.8 1.1 2.1 0.45 0.65 1.05 1.65 1.95 Mask Thickness 100m 100m 100m 100m 100m In order to expect the self alignment effect, it is recommended that land width is almost the same size as terminal of capacitor, and space between lands (c) nearly equal to the space between terminals for appropriate soldering. Auxiliary electrode Anode terminal Insulating resin -- Conductive adhesive Cathode terminal PERFORMANCE Item (1) No. Performance Test method 1 Leakage Current (A) Larger value of 0.01 CV or 0.5 A JIS C 5101-1, 4.9 Applied voltage : Rated voltage Duration : 5 min Measuring temperature : Room temperature 2 Capacitance (F) Shall be within the specified tolerance. JIS C 5101-1, 4.7 Measuring frequency : 120 Hz 20% Measuring voltage : 0.5 Vrms +1.5 ~ 2 VDC Measuring temperature : Room temperature 3 Dissipation Factor Shall not exceed the values shown in CATALOG NUMBERS AND RATING OF STANDARD PRODUCTS or LOW PROFILE PRODUCTS. JIS C 5101-1, 4.8 Measuring frequency : 120 Hz 20% Measuring voltage : 0.5 Vrms +1.5 ~ 2 VDC Measuring temperature : Room temperature 4 Characteristics at High and Low Temperature Step 1 Step 2 JIS C 5101-1, 4.29 Shall not exceed the value in No.1. Shall be within the specified tolerance. Shall not exceed the values shown in CATALOG NUMBERS AND RATING OF STANDARD PRODUCTS or LOW PROFILE PRODUCTS. Capacitance Change Shall be within any of the following ranges and specified according to CATALOG Measuring temperature : -55 3C NUMBERS AND RATING OF STANDARD PRODUCTS or LOW PROFILE PRODUCTS. 0 0 * Within -15 % of the value at Step 1 * Within -30 % of the value at Step 1 Shall not exceed the values shown in CATALOG NUMBERS AND RATING OF STANDARD PRODUCTS or LOW PROFILE PRODUCTS. Dissipation Factor Step 3 Step 4 Leakage Current Capacitance Change Dissipation Factor Shall not exceed the value in No.1. Measuring temperature : 20 2C Shall be within 2% of the value at Step 1. Shall not exceed the values shown in CATALOG NUMBERS AND RATING OF STANDARD PRODUCTS or LOW PROFILE PRODUCTS. Leakage Current Shall be within any of the following ranges and specified according to CATALOG Measuring temperature : 85 2C NUMBERS AND RATING OF STANDARD PRODUCTS or LOW PROFILE PRODUCTS. * Larger value of 0.1 CV or 5 A * 0.2 CV or less Shall be within any of the following ranges and specified according to CATALOG NUMBERS AND RATING OF STANDARD PRODUCTS or LOW PROFILE PRODUCTS. * Within +10 * Within +20 0 % of the value at Step 1 0 % of the value at Step 1 Shall not exceed the values shown in CATALOG NUMBERS AND RATING OF STANDARD PRODUCTS or LOW PROFILE PRODUCTS. Capacitance Change Dissipation Factor Dissipation Factor Shall be within any of the following ranges and specified according to CATALOG Measuring temperature : 125 2C NUMBERS AND RATING OF STANDARD PRODUCTS or LOW PROFILE PRODUCTS. Measuring voltage : Derated voltage at 125C * Larger value of 0.125 CV or 6.3 A * 0.25 CV or less Shall be within any of the following ranges and specified according to CATALOG NUMBERS AND RATING OF STANDARD PRODUCTS or LOW PROFILE PRODUCTS. * Within +15 * Within +20 0 % of the value at Step 1 0 % of the value at Step 1 Shall not exceed the values shown in CATALOG NUMBERS AND RATING OF STANDARD PRODUCTS or LOW PROFILE PRODUCTS. Leakage Current Capacitance Change Dissipation Factor Shall not exceed the value in No.1. Shall be within 2% of the value at Step 1. Shall not exceed the values shown in CATALOG NUMBERS AND RATING OF STANDARD PRODUCTS or LOW PROFILE PRODUCTS. Measuring temperature : 20 2C Leakage Current Shall be within any of the following ranges and specified according to CATALOG NUMBERS AND RATING OF STANDARD PRODUCTS or LOW PROFILE PRODUCTS. * Not exceeding the value in No.1 : Leakage current code A * Not exceeding twice the value in No.1 : Leakage current code B Shall be within any of the following ranges and specified according to CATALOG NUMBERS AND RATING OF STANDARD PRODUCTS or LOW PROFILE PRODUCTS. * Within 15% of the value before test * Within 20% of the value before test Shall not exceed the values shown in CATALOG NUMBERS AND RATING OF STANDARD PRODUCTS or LOW PROFILE PRODUCTS. There shall be no evidence of mechanical damage. JIS C 5101-1, 4.26 Test temperature and applied voltage : To each half of specimens * 85 2C, rated voltage x 1.15 * 125 2C, 2/3 x rated voltage x 1.15 Series protective resistance : 1000 Discharge resistance : 1000 There shall be no evidence of mechanical damage. JIS C 5101-1, 4.34 Capacitors mounted under the following conditions are used as specimens. * Indirect heating method (reflow) * Temperature : 240 10C / Time : Less than 10 sec Pressure : Case U : 2N Case M, S, A, B : 5N Duration : 10 1 sec Leakage Current Step 5 Step 6 5 Surge (Surge Voltage) Measuring temperature : 20 2C Leakage Current Capacitance Dissipation Factor Capacitance Change Capacitance Change Dissipation Factor Appearance 6 Shear Test 7 Substrate Bending Test (Terminal Strength) Capacitance Appearance Initial value to remain steady during measurement. There shall be no evidence of mechanical damage. JIS C 5101-1, 4.35 Bending : 1 mm 8 Vibration (Vibration Resistance) Capacitance Appearance Initial value to remain steady during measurement. There shall be no evidence of mechanical damage. JIS C 5101-1, 4.17 Frequency range : 10 ~ 55 Hz Swing width : 1.5 mm Vibration direction : 3 directions with mutually right-angled Duration : 2 hours in each of these mutually perpendicular directions (total 6 hours) Mounting : Solder terminal to the printed board 9 Shock There shall be no intermittent contact of 0.5 ms or greater, short, or open. Nor shall there be any spark discharge, insulation breakdown, or evidence of mechanical damage. JIS C 5101-1, 4.19 Peak acceleration : 490 m/s2 Duration : 11 ms Wave form : Half-sine 10 Solderability Solder shall completely cover the terminal surface (there shall be no pin holes, JIS C 5101-1, 4.15 Solder temperature : 235 5C nonwetting or solder repelling). Dipping time : 2 0.5 sec Dipping depth : Terminal shall be dipped into melted solder. 11 Resistance to Soldering Heat Leakage Current Capacitance Change Dissipation Factor Appearance 12 Rapid Change of Temperature (Temperature Cycle) Leakage Current Capacitance Change Dissipation Factor Appearance 13 High Temperature/ Moisture (Moisture Resistance) Leakage Current Capacitance Change Dissipation Factor Appearance 14 Endurance (High Temperature Load) Leakage Current Capacitance Change Dissipation Factor Appearance Shall be within any of the following ranges and specified according to CATALOG NUMBERS AND RATING OF STANDARD PRODUCTS or LOW PROFILE PRODUCTS. * Not exceeding the value in No.1 : Leakage current code A * Not exceeding twice the value in No.1 : Leakage current code B Shall be within any of the following ranges and specified according to CATALOG NUMBERS AND RATING OF STANDARD PRODUCTS or LOW PROFILE PRODUCTS. * Within 15% of the value before test * Within 20% of the value before test Shall not exceed the values shown in CATALOG NUMBERS AND RATING OF STANDARD PRODUCTS or LOW PROFILE PRODUCTS. There shall be no evidence of mechanical damage. IR reflow method Preheating : 130 ~ 160C for about 60 sec Reflow : 200C, less than 60 sec, 260C max. Number of cycles : 2 Shall not exceed twice the value in No.1. Shall be within any of the following ranges and specified according to CATALOG NUMBERS AND RATING OF STANDARD PRODUCTS or LOW PROFILE PRODUCTS. * Within 15% of the value before test * Within 20% of the value before test Shall not exceed 150% of the values shown in CATALOG NUMBERS AND RATING OF STANDARD PRODUCTS or LOW PROFILE PRODUCTS. There shall be no evidence of mechanical damage. JIS C 5101-1, 4.16 Step 1 : -55 3C, 30 3 min Step 2 : 25 +10 -5 C, 3 min or less Step 3 : 125 2C, 30 3 min Step 4 : 25 +10 -5 C, 3 min or less Number of cycles : 5 Shall not exceed twice the value in No.1. Shall be within any of the following ranges and specified according to CATALOG NUMBERS AND RATING OF STANDARD PRODUCTS or LOW PROFILE PRODUCTS. * Within 15% of the value before test * Within 20% of the value before test Shall not exceed 150% of the values shown in CATALOG NUMBERS AND RATING OF STANDARD PRODUCTS or LOW PROFILE PRODUCTS. There shall be no evidence of mechanical damage, and marking shall be legible. JIS C 5101-1, 4.22 Temperature : 40 2C Moisture : 90 ~ 95%RH Duration : 500 +24 0 hrs Shall not exceed twice the value in No.1. Shall be within any of the following ranges and specified according to CATALOG NUMBERS AND RATING OF STANDARD PRODUCTS or LOW PROFILE PRODUCTS. * Within 15% of the value before test * Within 30% of the value before test Shall not exceed 150% of the values shown in CATALOG NUMBERS AND RATING OF STANDARD PRODUCTS or LOW PROFILE PRODUCTS. There shall be no evidence of mechanical damage, and marking shall be legible. JIS C 5101-1, 4.23 Test temperature and applied voltage : 85 2C and rated voltage or 125 3C and 2/3 x rated voltage Duration : 2000 +72 0 hrs Power supply impedance : 3 or less -- FREQUENCY CHARACTERISTICS 251 M 6.3 VDC-10 F M-case, Sample : 5 pcs. 10000 1000 Impedance & ESR () 100 Impedance 10 ESR 1 0.1 0.01 0.1 1 10 100 Frequency (kHz) 1000 10000 TEMPERATURE CHARACTERISTICS 251 M 6.3 VDC-10 F M-case, Sample : 12 pcs. 12 Max. Mean Min. 10 8 100 4 2 10 0 -2 -4 -6 Dissipation factor -8 -60 0.16 0.14 0.12 0.10 0.08 0.06 0.04 0.02 0.00 -60 -40 -20 0 20 40 60 Temperature (C) 80 100 120 Leakage current (A) Capacitance change (%) 6 1 0.1 0.01 0.001 -40 -20 0 20 40 60 Temperature (C) -- 80 100 120 0 20 40 60 80 100 120 Temperature (C) SURGE VOLTAGE 85C, RATED VOLTAGE 1.15 THERMAL SHOCK -55/+125C 0.1 0.08 0.06 0.04 0.02 0 100 Capacitance change (%) 251 M 6.3 VDC-10 F M-case, Sample : 12 pcs. 8 4 0 -4 -8 -12 -16 -20 Dissipation factor 8 4 0 -4 -8 -12 -16 -20 Max. Mean Min. 0.1 0.08 0.06 0.04 0.02 0 251 M 6.3 VDC-10 F M-case, Sample : 10 pcs. 100 10 Leakage current (A) Leakage current (A) Dissipation factor Capacitance change (%) Max. Mean Min. 1 0.1 0.01 10 1 0.1 0.01 INITIAL REFLOW VALUE 260C peak 100 1000 INITIAL VALUE 10000 REFLOW 260C peak Cycles 100 Cycles MOISTURE RESISTANCE 40C, 95%RH HIGH TEMPERATURE LOAD 85C, RATED VOLTAGE Max. Mean Min. Capacitance change (%) 251 M 6.3 VDC-10 F M-case, Sample : 10 pcs. 0.1 0.08 0.06 0.04 0.02 0 100 Dissipation factor Dissipation factor Capacitance change (%) Max. Mean Min. 8 4 0 -4 -8 -12 -16 -20 8 4 0 -4 -8 -12 -16 -20 251 M 6.3 VDC-10 F M-case, Sample : 24 pcs. 0.1 0.08 0.06 0.04 0.02 0 100 10 Leakage current (A) 10 Leakage current (A) 1000 1 0.1 1 0.1 0.01 0.01 INITIAL REFLOW VALUE 260C peak 100 1000 INITIAL REFLOW VALUE 260C peak 10000 Hours -- 100 Hours 1000 10000 Application Notes for Tantalum Solid Electrolytic Capacitor 1. Operating Voltage Tantalum Solid Electrolytic Capacitor shall be operated at the rated voltage or lower. Rated voltage: The "rated voltage" refers to the maximum DC voltage that is allowed to be continuously applied between the capacitor terminals at the rated temperature. Surge voltage: The "surge voltage" refers to the voltage that is allowed to be instantaneously applied to the capacitor at the rated temperature or the maximum working temperature. The capacitor shall withstand the voltage when a 30-second cycle of application of the voltage through a 1000 series resistance is repeated 1000 times in 6minute periods. When designing the circuit, the equipment's required reliability must be considered and appropriate voltage derating must be performed. b) Near and Far IR Ray Due to the heat absorption of the capacitor's body, the internal temperature of the capacitors may be 20 ~ 30C higher than the setting temperature and may exceed 260C. Temperature control is crucial in maintaining a temperature of 260C or lower. c) Convention Oven An infrared ray is the main source of heat in this process. The temperature of the substrate and the capacitors can be maintained at a similar level by the circulation of heated air, or an inert gas. (3) Soldering with a Soldering Iron Soldering with a soldering iron cannot be recommended due to the lack of consistency in maintaining temperatures and process times. If this method should be necessary, the iron should never touch the capacitor's terminals, and the temperature of the soldering iron should never exceed 290C. The application of the iron should not exceed 3 seconds. (4) Please consult us for other methods. 2. Application that contain AC Voltage Special attention to the following 3 items. (1) The sum of the DC bias voltage and the positive peak value of the AC voltage should not exceed the rated voltage. (2) Reverse voltage should not exceed the allowable values of the negative peak AC voltage. (3) Ripple voltage should not exceed the allowable values. 8. Solvent cleaning 3. Permissible Reverse Voltage If reverse voltage exceeding the value shown in the following table is applied to the capacitor, there is a fear of a fluctuation of leakage current and an increase in failure rate. To avoid the permissible reverse voltage, use the capacitor under bias voltage as required. Ambient temperature Permissible reverse voltage 25C 55C 10% of rated voltage 6% of rated voltage 85C 125C 3% of rated voltage 1% of rated voltage The above voltage or 0.5 V, whichever is greater. 10. Vibration Approximately 300 G shall be applied to a capacitor, when dropped from 1 meter to a concrete floor. Although capacitors are made to withstand this drop test, stress from shock due to falling or striking does cause damage to the capacitors and increases failure rates. Do not subject capacitors to this type of mechanical stress. 4. Permissible Ripple Voltage Permissible ripple voltage is determined by the loss of element and heat radiation of case and lead wire. This is influenced by capacitance, frequency of ripple, ESR and operating temperature. The permissible ripple voltage values are shown in our technical document. 11. Ultrasonic cleaning 5. Application on low-impedance circuit The failure rate of low impedance circuit at 0.1 /V is about five times greater than that of a 1 /V circuit. To curtail this higher failure rate, tantalum capacitors used in low impedance circuits, such as filters for power supplies, particularly switching power supplies, or for noise by-passing, require that operating voltage be derated to less than half of the rated voltage. Actually, 1/3 of the rated voltage is recommended. 6. Non Polar Application A - C1 + C2 Matsuo does not recommend Ultrasonic cleaning. This may cause damage to the capacitors, and may even cause broken terminals. If the Ultrasonic cleaning process will be used, please note the following: (1)The solvent should not be boiled. (Lower the ultrasonic wave output or use solvent with the high boiling point.) (2)The recommended wattage is less than 0.5 watts per cm2. (3)The cleaning time should be kept to a minimum. Also, samples must be swang in the solvlent. Please consult us. 12. Additional Notes Tantalum capacitors can be used as a non-polar unit if two capacitors are connected "BACK-TO-BACK" when reserve voltage is applied at a more than permissible value, or in a purely AC circuit. The two capacitors should both be of the same rated voltage and capacitance tolerance, and they should both be twice the required capacitance value. Ripple Voltage: Permissible Ripple Voltage shall not exceed the value allowed for either C1 or C2 (This will be the same, as the capacitors should be identical.) C1 x C2 Capacitance: C1 + C2 Leakage Current: If terminal A is (+), the Leakage Current will be equal to C1's Leakage Current. If terminal B is (+), the Leakage Current will be equal to C2's Leakage Current. - 9. Protective Resin Coating After components are assembled to substrate, a protective resin coating is sometimes applied. As this resin coating cures, it gives mechanical and thermal stress to Tantalum capacitors. This stress can cause damage to the capacitors, which affects their reliability. Before using a resin coating, proper research must be done in regards to the material and process to insure that excessive stress will not be applied to capacitors and other components. The above specifications apply for accidental reverse voltage. If reverse voltage is constantly applied to the capacitor, use it with non-polar connection. + Cleaning by organic solvent may damage capacitor's appearance and performance. However, our capacitors are not effected even when soaked at 20 ~ 30C 2-propanol for 5 minutes. When introducing new cleaning methods or changing the cleaning term, please consult us. B 7. Soldering 7.1. Preheating To obtain optimal reliability and solderability conditions, capacitors should be pre-heated at 170 to 190C for approximately 1 minute. 7.2. Soldering The body of the capacitor shall not exceed 260C during soldering. (1) Reflow Soldering Reflow soldering is a process in which the capacitors are mounted on a printed board with solder paste. There are two methods of Reflow Soldering: Direct and Atmospheric Heat. * Direct Heat (Hot plate) During the Direct Heat method, the capacitor has been positioned on a printed board, which is then placed upon a hot plate. The capacitor maintains a lower temperature than the substrate, which in turn stays at a lower temperature than the hot plate. * Atmospheric Heat a) VPS (Vapor Phase Soldering) During VPS,the substrate is heated by an inert liquid with a high boiling point. The temperature of the capacitor's body and the temperature of the substrate are about the same as the atmosphere. This temperature should be below 240C. * When more than one capacitor is connected in series, a resistor that can distribute the voltage equally to the capacitors shall be connected in parallel. * The capacitor cases shall not be cut even if the mounting space is insufficient. * During a customers aging process, voltage should remain under the rated voltage at all times. * Capacitors should never be touched or manipulated while operating. * Capacitors are not meant to be dismantled. * When testing capacitors, please examine the power source before conducting test to insure the tester's polarity and applied voltage. * In the event of a capacitor burning, smoking, or emitting an offensive smell during operation, please turn the circuit "off" and keep hands and face away from the burning capacitor. * If a capacitor be electrical shorted, it becomes hot, and the capacitor element may ignite. In this case, the printed board may be burnt out. * Capacitors should be stored at room temperature under low humidity. Capacitors should never be stored under direct sunlight, and should be stored in an environment containing dust. * If the capacitors will be operated in a humid environment, they should be sealed with a compound under proper conditions. * Capacitors should not be stored or operated in environments containing acids, alkalis or active gasses. * When capacitors are disposed of as "scrap" or waste, they should be treated as Industrial Waste since they contain various metals and polymers. * Capacitors submitted as samples should not be used for production purposes. These application notes are prepared based on "Guideline of notabilia for fixed tantalum electrolytic capacitors with solid electrolyte for use in electronic equipment" (EIAJ RCR-2386) issued by Japan Electronics and Information Technology Industries Association (EIAJ). For the details of the instructions (explanation, reasons and concrete examples), please refer to this guideline, or consult our Sales Department. Please feel free to ask our Sales Department for more information on the Tantalum Solid Electrolytic Capacitor. Overseas Sales Dep.: 3-5, 3-Chome, Sennari-cho, Toyonaka-shi, Osaka 561-8558, Japan Tel : 06-6332-0883 Fax : 06-6332-0920 USA: Matsuo Electronics of America, Inc. 2134 Main Street, Suite 200, Huntington Beach, CA 92648 Tel : 714-969-2491 Fax : 714-960-6492 Head Office: 3-5, 3-Chome, Sennari-cho, Toyonaka-shi, Osaka 561-8558, Japan Tel : 06-6332-0871 Fax : 06-6331-1386 URL: http://www.ncc-matsuo.co.jp/ Specifications on this catalog are subject to change without prior notice. Department to confirm specifications prior to use. -- Please inquire of our Sales