1N6469US thru 1N6476US Voidless-Hermetically-Sealed Surface Mount Unidirectional Transient Suppressors SCOTTSDALE DIVISION APPEARANCE This surface mount series of industry recognized voidless-hermetically-sealed Unidirectional Transient Voltage Suppressor (TVS) designs is military qualified to MILPRF-19500/552 and are ideal for high-reliability applications where a failure cannot be tolerated. They provide a Working Peak "Standoff" Voltage selection from 5.0 to 51.6 Volts with 1500 W ratings. They are very robust in hard-glass construction and also use an internal metallurgical bond identified as Category I for high reliability applications. The 1500 W series is military qualified to MIL-PRF-19500/552. These devices are also available in axial-leaded packages for thru-hole mounting by deleting the "US" suffix (see separate data sheet for 1N6469 thru 1N6476A). Microsemi also offers numerous other TVS products to meet higher and lower peak pulse power and voltage ratings in both through-hole and surface-mount packages. Package "G" (or "D-5C") WWW . Microsemi . C OM DESCRIPTION IMPORTANT: For the most current data, consult MICROSEMI's website: http://www.microsemi.com FEATURES * * * * * * * APPLICATIONS / BENEFITS High surge current and peak pulse power provides transient voltage protection for sensitive circuits Triple-layer passivation Internal "Category I" metallurgical bonds Voidless hermetically sealed glass package JAN/TX/TXV military qualifications available per MILPRF-19500/552 by adding JAN, JANTX, or JANTXV prefix Further options for screening in accordance with MILPRF-19500 for JANS by using a "SP" prefix, e.g. SP6469, SP6476, etc. Axial-leaded equivalents are also available (see separate data sheet for 1N6469 thru 1N6476) MAXIMUM RATINGS * * * * * * * * * Military and other high reliability transient protection Extremely robust construction Working Peak "Standoff" Voltage (VWM) from 5.0 to 51.6 V Available as 1500 W Peak Pulse Power (PPP) ESD and EFT protection per IEC61000-4-2 and IEC61000-4-4 respectively Secondary lightning protection per select levels in IEC61000-4-5 Square-end-cap terminals for easy mounting Nonsensitive to ESD per MIL-STD-750 Method 1020 Inherently radiation hard as described in Microsemi MicroNote 050 MECHANICAL AND PACKAGING * CASE: Hermetically sealed voidless hard glass * Operating & Storage Temperature: -55 C to +175 C o with Tungsten slugs * Peak Pulse Power at 25 C: 1500 Watts @ 10/1000 s * TERMINATIONS: End caps are Copper with (also see Figures 1,2 and 4) Tin/Lead (Sn/Pb) finish. Note: Previous inventory * Impulse repetition rate (duty factor): 0.01% had solid Silver end caps with Tin/Lead (Sn/Pb) * Forward Surge Current: 130 Amps@ 8.33 ms onefinish. half sine wave * MARKING: Body painted and part number, etc. * Forward Voltage: 1.5 V @ 4 Amps dc and 4.8 V at * POLARITY: Cathode band 100 Amps (pulsed) o * Tape & Reel option: Standard per EIA-481-B * Steady-State Power: 3.0 W @ TA = 25 C (see note * Weight: 1100 mg below and Figure 4) o * See package dimensions on last page * Thermal Resistance Junction to End Cap: 20.0 C/W * Solder Temperatures: 260oC for 10 s (maximum) NOTE: Steady-state power ratings with reference to ambient are for PC boards where thermal resistance from mounting point to ambient is sufficiently controlled where TJ(MAX) is not exceeded. o Microsemi Scottsdale Division 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503 Page 1 1N6469US - 1N6476US Copyright (c) 2007 10-03-2007 REV D o 1N6469US thru 1N6476US Voidless-Hermetically-Sealed Surface Mount Unidirectional Transient Suppressors SCOTTSDALE DIVISION TYPE 1N6469US 1N6470US 1N6471US 1N6472US 1N6473US 1N6474US 1N6475US 1N6476US Symbol VBR BREAK DOWN VOLTAGE V(BR) MIN. Volts 5.6 6.5 13.6 16.4 27.0 33.0 43.7 54.0 BREAKDOWN CURRENT I (BR) mAdc 50 50 10 10 5 1 1 1 WORKING PEAK VOLTAGE VWM MAX LEAKAGE CURRENT ID Vdc 5 6 12 15 24 30.5 40.3 51.6 Adc 1500 1000 20 10 5 5 5 5 MAXIMUM CLAMPING VOLTAGE VC MAXIMUM PEAK PULSE CURRENT IPP @ 10/1000 s V(pk) 9.0 11.0 22.6 26.5 41.4 47.5 63.5 78.5 @8/20 s A(pk) 945 775 374 322 207 181 135 107 @10/1000 s A(pk) 167 137 66 57 36.5 32 24 19 MAXIMUM TEMP. COEF. OF V(BR) o %/ C -.03, +0.04 0.06 0.085 0.085 .096 .098 .101 .103 WWW . Microsemi .C OM ELECTRICAL CHARACTERISTICS SYMBOLS & DEFINITIONS Definition Minimum Breakdown Voltage: The minimum voltage the device will exhibit at a specified current. Working Peak Voltage: The maximum peak voltage that can be applied over the operating temperature range. This is also referred to as Standoff Voltage. Maximum Standoff Current: The maximum current that will flow at the specified voltage and temperature. Maximum clamping voltage at specified IPP (Peak Pulse Current) at the specified pulse conditions. Peak Pulse Power: The peak power dissipation resulting from the peak impulse current IPP. VWM ID VC PPP FIG. 1 - Non-repetive peak pulse power rating curve NOTE: Peak power defined as peak voltage times peak current Copyright (c) 2007 10-03-2007 REV D Peak Value IPP Pulse time duration (tp) is defined as that point where IP decays to 50% of peak value (IPP). time (t) in milliseconds FIG. 2 Pulse wave form for exponential surge for 10/1000 s Microsemi Scottsdale Division 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503 Page 2 1N6469US - 1N6476US Pulse current (IP) in percent of IPP GRAPHS 1N6469US thru 1N6476US WWW . Microsemi .C OM Peak Pulse Power (Ppp), Current (Ipp), and DC Power in Percent of 25oC Rating SCOTTSDALE DIVISION Voidless-Hermetically-Sealed Surface Mount Unidirectional Transient Suppressors T - Temperature - oC FIGURE 3 8/20 s CURRENT IMPULSE WAVEFORM FIGURE 4 DERATING CURVE PACKAGE DIMENSIONS Inches [mm] 1N6469US - 1N6476US G-MELF-PKG (D-5C) Note: If mounting requires adhesive separate from the solder, an additional 0.090 inch diameter contact may be placed in the center between the pads as an optional spot for cement as shown in the pad layout. Copyright (c) 2007 10-03-2007 REV D Microsemi Scottsdale Division 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503 Page 3 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Microsemi: JANTX1N6473US JANTX1N6474US JAN1N6470US 1N6473US 1N6475US 1N6472US JANTXV1N6476US 1N6470US JAN1N6471US JANTX1N6471US JANTXV1N6472US JANTX1N6469US JANTX1N6476US 1N6471US JAN1N6469US JANTX1N6470US 1N6474US 1N6476US JAN1N6472US JAN1N6474US JAN1N6475US JANTXV1N6470US JAN1N6476US JANTXV1N6473US JANTXV1N6469US JANTX1N6475US JANTXV1N6474US JANTX1N6472US JANTXV1N6471US JANTXV1N6475US JAN1N6473US 1N6469US