Automotive Relays Plug-in Mini ISO Relays VF4A (Standard, Shrouded and Weatherproof) Pin assignment similar to ISO 7588 part 1 Plug-in terminals Customized versions on request - Integrated components (e.g. resistor, diode) - Customized marking - Special covers (e.g. brackets, shrouded) Typical applications Cross carline up to 40A for example: ABS control, blower fans, car alarm, cooling fan, Electric Power Steering, energy management, engine control, fuel pump, heated front screen, lamps: front, rear, fog light, main switch/ supply relay, valves, wiper control. FVF4Aco_fcw1_bw Contact Data Contact arrangement 1 form C, 1 CO Rated voltage 12VDC Limiting continuous current, form A/form B NO/NC 23C 60/45A 85C 40/30A 125C 17/12A Limiting making current1), form A/form B 120/45A Limiting breaking current, form A/form B 60/40A Limiting short-time current overload current, ISO 8820-32) 1.35 x 40A, 1800s 2.00 x 40A, 60s 6.00 x 40A, 1s Jump start test, ISO 16750-1 24VDC for 5min, conducting nominal current at 23C Contact material silver based Min. recommended contact load3) 1A at 5VDC Initial voltage drop at 10A, form A (NO) contact, typ./max. 15mW/200mV form B (NC) contact, typ./max. 20mW/250mV Frequency of operation at nominal load 6 ops./min (0.1Hz) Operate/release time typ. 7/2ms4) Electrical endurance >1x105 ops. resistive load, form A (NO) contact 40A, 14VDC resistive load, form B (NC) contact 30A, 14VDC Contact Data (continued) >1x106 ops. Mechanical endurance 1) The values apply to a resistive or inductive load with suitable spark suppression and at maximum 14VDC for 12VDC or 28VDC for 24VDC load voltages. For a load current duration of maximum 3s for a make/break ratio of 1:10. 2) Current and time are compatible with circuit protection by a typical automotive fuse. Relay will make, carry and break the specified current. 3) See chapter Diagnostics of Relays in our Application Notes or consult the internet at http://relays.te.com/appnotes/ 4) For unsuppressed relay coil. A low resistive suppression device in parallel to the relay coil increases the release time and reduces the lifetime caused by increased erosion and/or higher risk of contact tack welding. Coil Data Rated coil voltage 12/24VDC Coil versions, DC coil Coil code F H Rated voltage VDC 12 24 Operate voltage VDC 7.2 14.4 Release voltage VDC 1.2 2.4 Coil resistance5) 10% 90 360 Rated coil power5) W 1.6 1.6 5) Without components in parallel. All figures are given for coil without pre-energization, at ambient temperature +23C. Coil operating range TEVF4_OVR1 Max. DC load breaking capacity Does not t the tempe the contac E = pre-en Does not take into account the temperature rise due to the contact current E = pre-energization. Load limit curve 1: arc extinguishes during transit time (changeover contact). Load limit curve 2: safe shutdown, no stationary arc (make contact). Load limit curves measured with low inductive resistors verified for 1000 switching events. 01-2016, Rev. 0116 www.te.com (c) 2016 TE Connectivity. Datasheets and product specification according to IEC 61810-1 and to be used only together with the `Definitions' section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the `Definitions' section, available at http://relays.te.com/definitions Datasheets, product data, `Definitions' section, application notes and all specifications are subject to change. 1 Automotive Relays Plug-in Mini ISO Relays VF4A (Standard, Shrouded and Weatherproof) (Continued) Insulation Data Initial dielectric strength between open contacts between contact and coil between adjacent contacts Other Data (continued) Terminal type plug-in, QC Cover retention axial force 150N pull force 200N push force 200N Terminal retention pull force 100N push force 100N resistance to bending 10N7) force applied to side 10N7) torque 0.3Nm Weightapprox. 35 to 60g (1.2 to 2.1oz) Packaging unit cover type VF4-1 357 pcs. VF4-4 200 pcs. VF4-5, VF4-6 110 pcs. 500Vrms 500Vrms 500Vrms Other Data EU RoHS/ELV compliance compliant Protection to heat and fire according UL94 UL94-HB or better Ambient temperature -40 to 125C Category of environmental protection, IEC 61810 RT I (dustproof), RT III (sealed/sealed - shrouded) Degree of protection, IEC 60529 IP54 (dustproof), IP67 (sealed) IP67 (sealed - shrouded), only with special connector Vibration resistance (functional) IEC 60068-2-6 (sine sweep) 10 to 500Hz, min. 5g6) Shock resistance (functional) IEC 60068-2-27 (half sine) 11ms, min. 20g6) Drop test, free fall, IEC 60068-2-32 1m onto concrete 6) No change in the switching state >1s. Valid for NC contacts, NO contact values significantly higher. 7) Values apply 2mm from the end of the terminal. When the force is removed, the terminal must not have moved by more than 0.3mm. Accessories For details see datasheet Connectors for Mini, Mini (Shrouded) and Maxi ISO Relays Terminal Assignment CO 1 form C, 1 CO 85 COD 1 form C, 1 CO with diode 87 87a 85 30 86 COR 1 form C, 1 CO with resistor 87 87a 85 30 86 87 87a 30 86 Dimensions VF4A with dust cover VF4-1**** (without bracket) and VF4-4**** (with bracket) View of the terminals (bottom view) 28.0 MAX. 6.0 15.0 Terminal thickness 0.81 + 0.03 5.0 8.0 16.2 28.0 MAX. 3.1 5.3 16.8 30 87A 86 25.5 MAX. 87 85 11.5 MAX. 8.4 17.9 6.3 2 01-2016, Rev. 0116 www.te.com (c) 2016 TE Connectivity. 6.3 TE1344-I2 Datasheets and product specification according to IEC 61810-1 and to be used only together with the `Definitions' section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the `Definitions' section, available at http://relays.te.com/definitions Datasheets, product data, `Definitions' section, application notes and all specifications are subject to change. 6.4 Automotive Relays Plug-in Mini ISO Relays 0.39 MAX. VF4A (Standard, Shrouded and Weatherproof) (Continued) 11.5 MAX. 12.25 Dimensions 4.1 MAX. 4.25 VF4A with shrouded dust cover VF4-2**** (without bracket) and VF4-5**** (with bracket) 18.6 9.0 View of the terminals (bottom view) 6.3 TYP. 4.0 TE1347-82 9.0 22.5 32.0 MAX. 6.4 30 0.39 0.39 MAX. MAX. 16.6 0.15 6.6 9.0 12.25 12.25 7.25 87 11.5 11.5 MAX. MAX. 7.25 8.0 4.1 MAX. 4.1 MAX. 4.25 6.3 TYP. 6.3 TYP. 4.5 18.5 0.25 32.0 MAX. 32.0 MAX. 4.0 25.0 MAX. 25.0 MAX. 17.9 86 85 87A 8.4 4.25 32.0 MAX. 25.0 MAX. 18.6 22.5 6.4 7.25 45.0 0.5 16.8 4.0 4.20 0. TE1347-82 TE1347-82 11.5 MAX. 32.0 MAX. 32.0 MAX. 30 30 6.3 View of the terminals (bottom view) 19.7 0.15 7.5 0.45 36.1 MAX. 86 36.1 MAX. 16.6 0.15 8.4 87 87 6.6 86 8.4 85 85 VF4A with weatherproof cover 87Abracket) 17.9 17.9(with bracket) VF4-3**** (without 87A and VF4-6**** 9.0 8.0 4.5 8.0 4.5 16.8 16.8 18.5 0.25 30 45.0 0.5 85 87a 17.9 4.20 0.15 8.4 87 86 11.5 MAX. 8.0 6.3 19.7 0.15 7.5 0.45 12.0 0.38 36.1 MAX. 36.1 MAX. 11.50 0.15 16.8 7.0 REF. TE1348-91 30 85 87a 17.9 8.4 87 86 8.0 12.0 0.38 16.8 01-2016, Rev. 0116 www.te.com (c) 2016 TE Connectivity. Datasheets and product specification according to IEC 61810-1 and to be used only together with the `Definitions' section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the `Definitions' section, available at http://relays.te.com/definitions Datasheets, product data, `Definitions' section, application notes and all specifications are subject to change. 3 Automotive Relays Plug-in Mini ISO Relays VF4A (Standard, Shrouded and Weatherproof) (Continued) Product code structure Typical product code VF4 -1 5 F 11 -S01 Circuit1) Contact material Terminals Part number CO Silver based Plug-in, QC 6-1393298-0 6-1393298-2 6-1393298-4 6-1393298-5 7-1393298-3 8-1393298-1 5-1393305-7 8-1393298-8 1-1393302-0 1-1393302-1 8-1393305-7 9-1393305-5 9-1393305-9 Type VF4A VF4A Cover type 1 Dust cover standard 3 Weatherproof cover standard 5 Shrouded dust cover with bracket Contact arrangement 5 1 form C, 1 CO Coil F 12VDC Contact material 11 Silver based Coil suppression S01 Resistor in parallel (680) S08 Resistor in parallel (2700) Product code VF4A-15F11 VF4A-15F11-C05 VF4A-15F11-S01 VF4A-15F11-S05 VF4A-15F21-S01 VF4A-15H11 VF4A-15H11-S08 VF4A-45F11 VF4A-45F11-S01 VF4A-45H11 VF4A-55F11-S01 VF4A-65F11-S01 VF4A-65H11-S08 Superseded by V23136-A0004-X058 - V23136-A0004-X059 V23136-A0004-X086 V23136-A0004-X075 V23234-A0004-X055 V23234-A0004-X053 V23234-A1001-X036 V23234-A1001-X033 V23234-A1004-X050 - - - 2 4 6 Shrouded dust cover standard Dust cover with bracket Weatherproof cover with bracket H 24VDC 21 Silver based for capacitive loads S05 Diode in parallel (cathode 86) Arrangement 1-1414686-0 1 form C, - 1 CO 1-1414687-0 4-1414992-7 7-1414985-1 2-1904025-6 2-1904025-5 3-1904022-2 1-1904022-1 1-1904027-1 - - - Cover Standard Sealed Standard Bracket Shrouded Weatherproof Coil suppression Resistor 680 Diode (cathode 86) Resistor 680 Resistor 2700 Resistor 680 Resistor 680 COR COD COR CO COR CO COR CO COR Silver based2) Silver based Resistor 2700 1) See terminal assignment diagrams. 2) Special contact material for capacitive loads. Other types on request. This list represents the most common types and does not show all variants covered by this datasheet. 4 01-2016, Rev. 0116 www.te.com (c) 2016 TE Connectivity. Datasheets and product specification according to IEC 61810-1 and to be used only together with the `Definitions' section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the `Definitions' section, available at http://relays.te.com/definitions Datasheets, product data, `Definitions' section, application notes and all specifications are subject to change.