Rubber Bumpers Specifications: Material Colour : Polyurethane : Clear Part Number W 0.02 [0.5] H 0.02 [0.5 6 x 12 Matrix Kiss Cut Pad PCC/PAD 2558 0.4 [10.2] 0.1 [2.5] 242 2559 0.5 [12.7] 0.12 [3.1] 2560 0.5 [12.7] 0.23 [5.8] 200 Type Pyramid Dimensions : Inches (Millimetres) 6 x 12 Matrix Kiss Cut Pad PCC/PAD Part Number W 0.02 [0.5] H 0.02 [0.5 2561 0.5 [12.7] 0.14 [3.6] 2562 0.5 [12.7] 0.06 [1.5] 2563 0.5 [12.7] 0.25 [6.4] 2564 0.81 [20.6] 0.12 [3] 72 2565 0.37 [9.4] 0.19 [4.8] 200 Type 200 Cylindrical Dimensions : Inches (Millimetres) www.element14.com www.farnell.com www.newark.com Page <1> 18/06/13 V1.1 Rubber Bumpers Part Number W 0.02 [0.5] H 0.02 [0.5 6 x 12 Matrix Kiss Cut Pad PCC/PAD 2566 0.44 [11.2] 0.2 [5.1] 242 2567 0.7 [17.8] 0.38 [9.7] 98 2568 0.375 [9.5] 0.15 [3.8] 72 2569 0.62 [15.7] 0.31 [7.9] 128 Type Domes Dimensions : Inches (Millimetres) Part Number W 0.02 [0.5] H 0.02 [0.5 6 x 12 Matrix Kiss Cut Pad PCC/PAD Type 2598 0.88 [22.4] 0.4 [10.2] 72 Round Dimensions : Inches (Millimetres) Important Notice : This data sheet and its contents (the "Information") belong to the members of the Premier Farnell group of companies (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. Multicomp is the registered trademark of the Group. (c) Premier Farnell plc 2012. www.element14.com www.farnell.com www.newark.com Page <2> 18/06/13 V1.1