Infrared LUXEON IR Compact Line High power infrared emitters enabling the next level of design flexibility The LUXEON IR Compact Line is a product line of high power infrared emitters specifically designed for high efficiency as required in a small spaces. Their compact and well-defined light source geometry allows them to be easily coupled into secondary optics for tight beam control. LUXEON IR Compact Line is designed with innovative LUXEON technology to provide industry-leading performance. Through best-in-class thermal conductivity, LUXEON IR Compact Line has excellent performance at actual operating conditions. Features and Benefits Primary Applications Available in 850nm and 940nm wavelengths to provide optimized performance for each type of application Surveillance / CCTV Radiant Power: 1050mW (850nm) and 1150mW (940nm) for a greater system performance Machine Vision Compact package of 1.9mm x 1.37mm with a 2-pad configuration provides the highest power density in the industry for a new level of miniaturization 3D Scanning / Time of Flight Ultra-low Rth of 2.8C/W, solves thermal challenges and supports space saving designs Biometric Identification User Interface Control Augmented / Virtual Reality DS190 LUXEON IR Compact Line Product Datasheet (c)2018 Lumileds Holding B.V. All rights reserved. Table of Contents General Product Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Product Test Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Part Number Nomenclature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Radiometric Power Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Environmental Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Performance Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Product Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Electrical and Thermal Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Absolute Maximum Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Characteristic Curves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Spectral Power Distribution Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Light Output Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Forward Current Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Wavelength Shift Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Radiation Pattern Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Permissible Pulse Handling Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Product Bin and Labeling Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Decoding Product Bin Labeling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Radiometric Power Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Peak Wavelength Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Forward Voltage Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Mechanical Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Reflow Soldering Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 JEDEC Moisture Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Solder Pad Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Packaging Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Pocket Tape Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Reel Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 DS190 LUXEON IR Compact Line Product Datasheet 20180619 (c)2018 Lumileds Holding B.V. All rights reserved. i General Product Information Product Test Conditions LUXEON IR Compact Line emitters are tested and binned with a 20ms monopulse of 1000mA at a junction temperature, Tj, of 25C. Part Number Nomenclature Part numbers for LUXEON IR Compact Line follow the convention below: L 1 I Z - 0 A A A X X X X X X X X X Where: A A A - designates nominal peak wavelength X X X X X X X X X - reserved for further customization Therefore, the following part number is used for a LUXEON IR Compact emitter with a peak wavelength of 850nm: L 1 I Z - 0 8 5 0 0 0 0 0 0 0 0 0 0 Radiometric Power Maintenance Please contact your local Sales Representative or Lumileds Technical Solutions Manager for more information about the longterm performance of this product. Environmental Compliance Lumileds LLC is committed to providing environmentally friendly products to the solid-state lighting market. LUXEON IR Compact Line is compliant to the European Union directives on the restriction of hazardous substances in electronic equipment, namely the RoHS Directive 2011/65/EU and REACH Regulation (EC) 1907/2006. Lumileds LLC will not intentionally add the following restricted materials to its products: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or polybrominated diphenyl ethers (PBDE). DS190 LUXEON IR Compact Line Product Datasheet 20180619 (c)2018 Lumileds Holding B.V. All rights reserved. 2 Performance Characteristics Product Selection Guide Table 1. Product performance and optical characteristics of LUXEON IR Compact Line at 1000mA, Tj=25C. Radiometric Power [2] (mW) Typical Spectrum FWHM (nm) Part Number Typical Typical Radiant Intensity (mW/sr) 900 1050 250 35 L1IZ-0850000000000 1000 1150 300 50 L1IZ-0940000000000 Peak WAVELENGTH [1] (nm) Typical FWHM Beam Angle () Minimum 850 150 940 150 Notes for Table 1: 1. Lumileds maintains a tolerance of 0.5nm on peak wavelength measurements. 1. Lumileds maintains a tolerance of 7% on radiometric power measurements. Electrical and Thermal Characteristics Table 2. Electrical and thermal characteristics for LUXEON IR Compact Line at 1000mA, Tj=25C. Typical Temperature Coefficient of Forward Voltage [2] MAXIMUM (mV/C) Forward Voltage [1] (Vf) Part Number Typical Temperature Coefficient of Peak Wavelength [2] (nm/C) Typical Thermal Resistance--Junction to Solder Pad (C/W) Minimum Typical L1IZ-0850000000000 2.7 3.2 3.7 -4.6 0.26 2.8 L1IZ-0940000000000 2.3 2.9 3.4 -2.6 0.29 2.8 Notes for Table 2: 1. Lumileds maintains a tolerance of 1% on forward voltage measurements. 2. Measured between 25C and 85C. Absolute Maximum Ratings Table 3. Absolute maximum ratings for LUXEON IR Compact Line. Parameter Maximum Performance DC Forward Current 1000mA [1, 2] 3000mA Peak Pulsed Forward Current [1, 3] Emitter Junction Temperature [1] (DC & Pulse) 145C ESD Sensitivity (ANSI/ESDA/JEDEC JS-001-2012) Class 3B Operating Case Temperature [1] -40C to 125C Emitter Storage Temperature -40C to 125C SMD Process Classification Temperature 260C per JEDEC J-STD-020E Allowable Reflow Cycles 3 Reverse Voltage (Vreverse) LUXEON IR LEDs are not designed to be driven in reverse bias Notes for Table 3: 1. Proper current derating must be observed to maintain the junction temperature below the maximum allowable junction temperature. 2. Residual periodic variations due to power conversion from alternating current (AC) to direct current (DC), also called "ripple," are acceptable if the following conditions are met: - The frequency of the ripple current is 100Hz or higher - The average current for each cycle does not exceed the maximum allowable DC forward current - The maximum amplitude of the ripple does not exceed the maximum peak pulsed forward current 3. For pulse handling capability details see figure 9. DS190 LUXEON IR Compact Line Product Datasheet 20180619 (c)2018 Lumileds Holding B.V. All rights reserved. 3 Characteristic Curves Spectral Power Distribution Characteristics Figure 1. Typical normalized power vs. wavelength for LUXEON IR Compact Line at 1000mA, Tj=25C. Light Output Characteristics Figure 2. Typical normalized radiant power vs. case temperature for LUXEON IR Compact Line at 1000mA. DS190 LUXEON IR Compact Line Product Datasheet 20180619 (c)2018 Lumileds Holding B.V. All rights reserved. 4 3.5 850nm 940nm Normalized Radiant Power [-] 3.0 2.5 2.0 1.5 1.0 0.5 0.0 0 500 1000 1500 2000 2500 3000 Forward Current [mA] Figure 3. Typical normalized radiant power vs. forward current for LUXEON IR Compact Line at Tj=25C. 40 t_rise t_fall 35 30 Time [ns] 25 20 15 10 5 0 0 500 1000 1500 Forward Current [mA] 2000 2500 3000 Figure 4. Typical rise and fall times of optical signal vs. forward current for LUXEON IR Compact Line at Tj=25C. DS190 LUXEON IR Compact Line Product Datasheet 20180619 (c)2018 Lumileds Holding B.V. All rights reserved. 5 Forward Current Characteristics 3500 850nm 940nm 3000 Forward Current [mA] 2500 2000 1500 1000 500 0 2.4 2.8 3.2 3.6 4 Forward Voltage [V] Figure 5. Typical forward current vs. forward voltage for LUXEON IR Compact Line at Tj=25C. Wavelength Shift Characteristics Figure 6. Typical peak wavelength shift vs. case temperature for LUXEON IR Compact Line at 1000mA. DS190 LUXEON IR Compact Line Product Datasheet 20180619 (c)2018 Lumileds Holding B.V. All rights reserved. 6 Radiation Pattern Characteristics Figure 7. Typical radiation pattern for LUXEON IR Compact Line at 1000mA, Tj=25C. Figure 8. Typical polar radiation pattern for LUXEON IR Compact Line at 1000mA, Tj=25C. DS190 LUXEON IR Compact Line Product Datasheet 20180619 (c)2018 Lumileds Holding B.V. All rights reserved. 7 Permissible Pulse Handling Characteristics 3.5 D = 0.005 D = 0.01 D = 0.02 D = 0.05 D = 0.10 D = 0.20 D = 0.50 D = 0.75 3.0 Forward Current [A] 2.5 2.0 1.5 1.0 0.5 85C 0.0 1E-5 1E-4 1E-3 1E-2 1E-1 1E+0 1E+1 1E+2 Pulse Width [s] Figure 9. Permissible pulse handling capability for LUXEON IR Compact Line at Tj=85C for various duty cycles (D). DS190 LUXEON IR Compact Line Product Datasheet 20180619 (c)2018 Lumileds Holding B.V. All rights reserved. 8 Product Bin and Labeling Definitions Decoding Product Bin Labeling In the manufacturing of semiconductor products, there are variations in performance around the average values given in the technical datasheet. For this reason, Lumileds bins components for luminous flux or radiometric power, color point, peak or dominant wavelength and forward voltage. LUXEON IR Compact Line emitters are labeled using a 4-digit alphanumeric CAT code following the format below: A B C D Where: A - designates radiometric power bin (example: J=900 to 950mW, N=1200 to 1300mW) B C - designates peak wavelength bin (example: 8K=845nm to 850nm, 9H=935nm to 940nm) D designates forward voltage bin (example: D=2.5 to 3.0V, F=3.5 to 4.0V) - Therefore, a LUXEON IR Compact emitter with a radiometric power range of 1200 to 1300mW, peak wavelength range of 845 to 850nm and a forward voltage range of 2.5 to 3.0V has the following CAT code: N 8 K D Radiometric Power Bins Table 4 lists the standard radiometric power bins for LUXEON IR Compact Line emitters. Although several bins are outlined, product availability in a particular bin varies by production run and by product performance. Not all bins are available in all CCTs. Table 4. Radiometric power bin definitions for LUXEON IR Compact Line at 1000mA, Tj=25C. Bin Radiometric Power [1] (mW) Minimum Maximum 900 950 K 950 1000 L 1000 1100 M 1100 1200 N 1200 1300 J Notes for Table 4: 1. Lumileds maintains a tolerance of 7% on radiometric power measurements. DS190 LUXEON IR Compact Line Product Datasheet 20180619 (c)2018 Lumileds Holding B.V. All rights reserved. 9 Peak Wavelength Bins Table 5. Peak wavelength bins for LUXEON IR Compact Line at 1000mA, Tj=25C. Bin Peak Wavelength [1] (nm) Minimum Maximum 8J 840 845 8K 845 850 8L 850 855 8M 855 860 8N 860 865 8P 865 870 8Q 870 875 9F 925 930 9G 930 935 9H 935 940 9J 940 945 9K 945 950 9L 950 955 9M 955 960 Notes for Table 5: 1. Lumileds maintains a tolerance of 0.5nm on peak wavelength measurements. Forward Voltage Bins Table 6. Forward voltage bin definitions for LUXEON IR Compact Line at 1000mA, Tj=25C. Bin C Forward Voltage [1] (Vf) Minimum Maximum 2.0 2.5 D 2.5 3.0 E 3.0 3.5 F 3.5 4.0 Notes for Table 6: 1. Lumileds maintains a tolerance of 1% on forward voltage measurements. DS190 LUXEON IR Compact Line Product Datasheet 20180619 (c)2018 Lumileds Holding B.V. All rights reserved. 10 Mechanical Dimensions 0.90 0.10* 0.25 0.49 0.49 CATHODE 1.75 1.90 0.07* 0.685 1.37 0.07* ANODE Theoretical Optical Center TOP VIEW SIDE VIEW BOTTOM VIEW Figure 10. Mechanical dimensions for LUXEON IR Compact Line. Notes for Figure 10: 1. Drawings are not to scale. 2. All dimensions are in millimeters. DS190 LUXEON IR Compact Line Product Datasheet 20180619 (c)2018 Lumileds Holding B.V. All rights reserved. 11 Reflow Soldering Guidelines tp Tp Critical Zone TL to Tp Ramp-up TL Temperature tL Tsmax Tsmin Ramp-down ts Preheat Area 25 Time 25C to Peak JEDEC J-STD-020D Time Figure 11. Visualization of the acceptable reflow temperature profile as specified in Table 7. Table 7. Reflow profile characteristics for LUXEON IR Compact Line. PROFILE FEATURE Lead-Free Assembly Preheat Minimum Temperature (Tsmin) 150C Preheat Maximum Temperature (Tsmax) 200C Preheat Time (tsmin to tsmax) 120 seconds Ramp-Up Rate (TL to Tp) 3C / second maximum Liquidus Temperature (TL) 217C Time Maintained Above Temperature TL (tL) 150 seconds Peak / Classification Temperature (Tp) 260C Time Within 5C of Actual Temperature (tp) 10 to 30 seconds Ramp-Down Rate (Tp to TL) 6C / second maximum Time 25C to Peak Temperature 8 minutes maximum JEDEC Moisture Sensitivity Table 8. Moisture sensitivity levels for LUXEON IR Compact Line. level 1 Floor Life Soak Requirements Standard TIme Conditions Time Conditions Unlimited 30C / 85% RH 168 Hours +5 / -0 85C / 85% RH DS190 LUXEON IR Compact Line Product Datasheet 20180619 (c)2018 Lumileds Holding B.V. All rights reserved. 12 Solder Pad Design Center of package LUXEON IR Compact pkg outline Stencil pattern Solder mask opening Figure 12. Recommended PCB solder pad layout for LUXEON IR Compact Line. Notes for Figure 12: 1. Drawings are not to scale. 2. All dimensions are in millimeters. 3. Electrode pads are symmetric. Packaging Information Pocket Tape Dimensions 4.00 0.10 1.50 0.10 1.75 0.10 2.00 0.05 1.411 0.063 B 1 3.50 0.05 +0.30 8.00 - 0.10 2.10 0.05 (Bo) A A B SECTION B-B 4.00 0.10 2 TOLERANCES (UNLESS OTHERWISE SPECIFIED) XX.X XX.XX 1.35 0.05 0.25mm 0.10mm 0.80 0.05 1.10 0.05 (Ko) 0.25 0.02 1.57 0.05 (Ao) 1 Carrier tape 2 Cover tape, thickness 0.061 0.013 SECTION A-A Figure 13. Pocket tape dimensions for LUXEON IR Compact Line. Notes for Figure 13: 1. Drawings are not to scale. 2. All dimensions are in millimeters. DS190 LUXEON IR Compact Line Product Datasheet 20180619 (c)2018 Lumileds Holding B.V. All rights reserved. 13 Reel Dimensions 0.0 3.0 -0.2 ENVIRONMENTAL SPROCKET HOLE CATHODE 329.0 1.0 HUB DIA 100.0 0.5 THRU HOLE ANODE B THRU HOLE LED ELECTRICAL ORIENTATION Unit A 38.0 1.0 INTERNAL LABEL 12.3 0.5 (3x) 14.4 MAX DIRECTION OF UNREELING THRU HOLE CUSTOMER LABEL 1) LEADER LENGTH 150 POCKETS (MINIMUM) 2) TRAILER LENGTH 90 POCKETS (MINIMUM) 1.5 MIN 20.20 MIN 13.0 ARBOR HOLE ANODE PAD TOLERANCES (UNLESS OTHERWISE SPECIFIED) CATHODE PAD XX.X XX.XX 0.25mm 0.10mm DETAIL B DETAIL A Figure 14. Reel dimensions for LUXEON IR Compact Line. Notes for Figure 14: 1. Drawings are not to scale. 2. All dimensions are in millimeters. DS190 LUXEON IR Compact Line Product Datasheet 20180619 (c)2018 Lumileds Holding B.V. All rights reserved. 14 About Lumileds Companies developing automotive, mobile, IoT and illumination lighting applications need a partner who can collaborate with them to push the boundaries of light. With over 100 years of inventions and industry firsts, Lumileds is a global lighting solutions company that helps customers around the world deliver differentiated solutions to gain and maintain a competitive edge. As the inventor of Xenon technology, a pioneer in halogen lighting and the leader in high performance LEDs, Lumileds builds innovation, quality and reliability into its technology, products and every customer engagement. Together with its customers, Lumileds is making the world safer, better and more beautiful--with light. To learn more about our lighting solutions, visit lumileds.com. (c)2018 Lumileds Holding B.V. All rights reserved. LUXEON is a registered trademark of the Lumileds Holding B.V. in the United States and other countries. lumileds.com DS190 LUXEON IR Compact Line Product Datasheet 20180619 Neither Lumileds Holding B.V. nor its affiliates shall be liable for any kind of loss of data or any other damages, direct, indirect or consequential, resulting from the use of the provided information and data. Although Lumileds Holding B.V. and/or its affiliates have attempted to provide the most accurate information and data, the materials and services information and data are provided "as is," and neither Lumileds Holding B.V. nor its affiliates warrants or guarantees the contents and correctness of the provided information and data. Lumileds Holding B.V. and its affiliates reserve the right to make changes without notice. You as user agree to this disclaimer and user agreement with the download or use of the provided materials, information and data. A listing of Lumileds product/patent coverage may be accessed at lumileds.com/patents.