GL05-HT3 to GL24-HT3 Vishay Semiconductors Low Capacitance ESD Protection Diodes for High-Speed Data Interfaces Features * Transient protection for data lines as per IEC 61000-4-2 (ESD) 15 kV (air) 8 kV e3 (contact) IEC 61000-4-5 (Lightning) see IPPM below * Small package for use in portable electronics * Low capacitance for high speed data lines, cellular handsets, USB port protection, LAN equipment, peripherals * Space saving LLP package * Lead (Pb)-free component * Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC 3 Top view 1 2 Pin 1 17914 Mechanical Data Case: LLP75-3B Plastic case Molding Compound Flammability Rating: UL 94 V-0 Terminals: High temperature soldering guaranteed: 260 C/10 sec. at terminals Weight: approx. 5.2 mg Parts Table Part Ordering code Marking Remarks GL05-HT3 GL05-HT3-GS08 50 Tape and Reel GL12-HT3 GL12-HT3-GS08 51 Tape and Reel GL15-HT3 GL15-HT3-GS08 52 Tape and Reel GL24-HT3 GL24-HT3-GS08 53 Tape and Reel Absolute Maximum Ratings Ratings at 25 C, ambient temperature unless otherwise specified Parameter Peak pulse power Test condition 8/20 s waveform Peak repetitive reverse voltage (rectifier) ESD voltage ESD per IEC 61000-4-2 Symbol Value Unit PPK 300 W VRRM 70 V VESD >25 kV Symbol Value Unit TJ - 55 to + 125 C Tstg, TSTG - 55 to + 150 C Thermal Characteristics Ratings at 25 C, ambient temperature unless otherwise specified Parameter Operation temperature Storage temperature Document Number 85823 Rev. 1.7, 29-Apr-05 Test condition www.vishay.com 1 GL05-HT3 to GL24-HT3 Vishay Semiconductors Electrical Characteristic Partnumber Marking Code VRWM VBR(min) IR(max) @ It = 1.0 mA @ VRWM VC(max) IPP = 1.0 A IPP = 5.0 A IPPM Cj Pin1 to Pin2 Pin3 NC tp = 8/20 s VR = 0V f = 1 MHz pF V V A V V A GL05-HT3 50 5 6 20 9.8 11 17 5 GL12-HT3 51 12 13.3 1 19 24 12 5 GL15-HT3 52 15 16.7 1 24 33 10 5 GL24-HT3 53 24 26.7 1 43 55 5 5 Package Dimensions in mm (Inches) 1 (0.039) 0.3 (0.012) 2 3 0.3 (0.012) 0.25 (0.010) 0.4 (0.016) 1 1.6 (0.062) 1.6 (0.062) 0.15 (0.006) 0.7 (0.027) 1 (0.039) ISO Method E Top View 18057 www.vishay.com 2 Document Number 85823 Rev. 1.7, 29-Apr-05 GL05-HT3 to GL24-HT3 Vishay Semiconductors Ozone Depleting Substances Policy Statement It is the policy of Vishay Semiconductor GmbH to 1. Meet all present and future national and international statutory requirements. 2. Regularly and continuously improve the performance of our products, processes, distribution and operating systems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances (ODSs). The Montreal Protocol (1987) and its London Amendments (1990) intend to severely restrict the use of ODSs and forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances. Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in the following documents. 1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively 2. Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental Protection Agency (EPA) in the USA 3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C (transitional substances) respectively. Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances. We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. Should the buyer use Vishay Semiconductors products for any unintended or unauthorized application, the buyer shall indemnify Vishay Semiconductors against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany Document Number 85823 Rev. 1.7, 29-Apr-05 www.vishay.com 3 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1