X00619MA2AL2 - STMicroelectronics

This is information on a product in full production.

May 2012 Doc ID 15755 Rev 2 1/10

X00619

0.8 A sensitive gate SCR

Datasheet − production data

Features

■IT(RMS) = 0.8 A

■VDRM, VRRM = 600 V

■IGT = 30 to 200 µA

Applications

■Limited gate current topologies

■Ground fault circuit interrupters

■Overvoltage crowbar protection in power

supplies

■Protection in electronic ballasts

■Capacitive discharge ignitions

■Ignitors (lighting, oven...)

Description

The X006 SCR can be used as on/off function in

applications where topology does not offer high

current for gate triggering.

This device is optimized in forward voltage drop

and inrush current capabilities for reduced power

losses and high reliability in harsh environments.

Table 1. Device summary

IT(RMS) 0.8 A

VDRM / VRRM 600 V

IGT 30 to 200 µA

TO-92

X00619-MA

SOT-223

X00619MN

www.st.com

Characteristics X00619

2/10 Doc ID 15755 Rev 2

1 Characteristics

Table 2. Absolute ratings (limiting values, Tj = 25 °C unless otherwise specified)

Symbol Parameter Value Unit

IT(RMS) On-state rms current (180 °Conduction angle) TO-92 TL = 83 °C 0.8 A

SOT-223 Tc = 107 °C

IT(AV) Average on-state current (180 °Conduction angle) TO-92 TL = 83 °C 0.5 A

SOT-223 Tc = 107 °C

ITSM Non repetitive surge peak on-state current tp = 8.3 ms Tj = 25 °C 10 A

tp = 10 ms 9

I²tI

²t Value for fusing tp = 10 ms Tj = 25 °C 0.4 A2s

di/dt Critical rate of rise of on-state current

IG = 2 x IGT

, tr ≤ 100 ns F = 60 Hz Tj = 125 °C 50 A/µs

IGM Peak gate current tp = 20 µs Tj = 125 °C 1 A

PG(AV) Average gate power dissipation Tj = 125 °C 0.1 W

Tstg

Storage junction temperature range

Operating junction temperature range

- 40 to + 150

- 40 to + 125 °C

Table 3. Electrical characteristics (Tj = 25 °C unless otherwise specified)

Symbol Test conditions Value Unit

IGT VD = 12 V, RL = 140 Ω

MIN. 30 µA

MAX. 200

VGT 0.8 V

VGD VD = VDRM, RL = 3.3 kΩ, RGK = 1 kΩTj = 125 °C MIN. 0.2 V

VRG IRG = 10 µA MIN. 5 V

IHIT = 50 mA, RGK = 1 kΩMAX. 5 mA

ILIG = 1 mA, RGK = 1 kΩ MAX. 6 mA

dV/dt VD = 67% VDRM, RGK = 1 kΩTj = 125 °C MIN. 40 V/µs

Table 4. Static electrical characteristics

Symbol Test conditions Value Unit

VTM ITM = 1 A, tp = 380 µs Tj = 25 °C

MAX

1.35 V

VTO Threshold voltage Tj = 125 °C 0.85 V

RdDynamic resistance 245 mΩ

IDRM IRRM VDRM = VRRM, RGK = 1 kΩTj = 25 °C 1 µA

Tj = 125 °C 100 µA

X00619 Characteristics

Doc ID 15755 Rev 2 3/10

Table 5. Thermal resistances

Symbol Parameter Value Unit

Rth(j-l) Junction to leads (DC) TO-92

Max.

°C/W

Rth(j-c) Junction to case (DC) SOT-223 30

Rth(j-a) Junction to ambient (DC) TO-92 150

S = 5 cm2SOT-223 60

Figure 1. Maximum average power

dissipation versus average

on-state current

Figure 2. Average and DC on-state current

versus case temperature (SOT-223)

P(W)

0.0

0.2

0.4

0.6

0.0 0.1 0.2 0.3 0.4 0.5 0.6

°°° °

°DC

I (A)

T(AV)

360°

α= 30°, 60°, 90°, 120°, 180°, DC

I (A)

T(AV)

0.0

0.2

0.4

0.6

0.8

1.0

0 25 50 75 100 125

SOT-223

T (°C)

α= 30°, 60°, 90°, 120°, 180°, DC

Figure 3. Average and DC on-state current

versus lead temperature (TO-92)

Figure 4. Average and DC on-state current

versus ambient temperature (free

air convection)

I (A)

T(AV)

0.0

0.2

0.4

0.6

0.8

1.0

0 25 50 75 100 125

TO-92

T (°C)

α= 30°, 60°, 90°, 120°, 180°, DC

I (A)

T(AV)

0.0

0.2

0.4

0.6

0.8

1.0

0 25 50 75 100 125

TO-92

= 0.5 cm²

T (°C)

amb

α= 180°

SOT-223

= 5 cm²

Characteristics X00619

4/10 Doc ID 15755 Rev 2

Figure 5. Relative variation of thermal

impedance junction to ambient

versus pulse duration

Figure 6. Relative variation of gate trigger,

holding and latching current versus

junction temperature

Z/R

th(j-a) th(j-a)

0.01

0.10

1.00

1.0E-02 1.0E-01 1.0E+00 1.0E+01 1.0E+02 1.0E+03

SOT-223

= 5 cm²

TO-92

= 0.5 cm²

t (s)

I,I,I[T] /

GTHL j

I ,I ,I [T =25°C]

GTHL j

0.0

0.2

0.4

0.6

0.8

1.0

1.2

1.4

1.6

-40 -20 0 20 40 60 80 100 120

and I

Typical values

T (°C)

Figure 7. Relative variation of holding

current versus gate-cathode

resistance (typical values)

Figure 8. Relative variation of dV/dt immunity

versus gate-cathode resistance

(typical values)

I [R ] / I [ =1k ]

HGK H

ΩR

0.0

0.5

1.0

1.5

2.0

2.5

3.0

3.5

1.E-02 1.E-01 1.E+00 1.E+01 1.E+02

R(k)

GK Ω

dV/dt[R ] / dV/dt[ =1k ]

GK ΩRGK

0.1

1.0

10.0

100.0

1.0E-01 1.0E+00 1.0E+01

VD= 0.67xVDRM

R(k)

GK Ω

Figure 9. Relative variation of dV/dt immunity

versus gate-cathode capacitance

(typical values)

Figure 10. Surge peak on-state current versus

number of cycles

dV/dt[C ] / dV/dt[ =1k ]

GK ΩRGK

100

1 10

= 0.67xV

DRM

= 1 kΩ

C (nF)

1 10 100 1000

Non repetitive

initial=25 °C

Repetitive

= 25 °C

One cycle

tp=10ms

Number of cycles

I (A)

TSM

X00619 Characteristics

Doc ID 15755 Rev 2 5/10

Figure 13. Thermal resistance junction to ambient versus copper surface under tab (SOT-223)

Figure 11. Non repetitive surge peak on state

current for a sinusoidal pulse and

corresponding value of I2T

Figure 12. On-state characteristics (maximum

values)

I (A), I t (A s)

TSM 22

100

0.01 0.10 1.00 10.00

ITSM

I²t

Tjinitial=25 °C

t(ms)

I (A)

0.1

1.0

10.0

0.5 1.0 1.5 2.0 2.5 3.0

Tjmax

Vto =0.85 V

Rd=245 mΩ

TJ=125 C

TJ=25 C

V (V)

R (°C/W)

th(j-a)

100

110

120

130

0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0

Epoxy printed circuit board FR4

copper thickness = 35 µm

S(cm²)

Ordering information scheme X00619

6/10 Doc ID 15755 Rev 2

2 Ordering information scheme

Figure 14. Ordering information scheme

X 006 19 M A 1AA2

Sensitive SCR series

Sensitivity

Voltage

Package

Current

006 = 0.8 A

2AL2 = Ammopack (TO-92)

5AL2 = Tape and reel (TO-92 and SOT-223)

19 = 30 µA to 200 µA

M = 600 V

A = TO-92

N = SOT-223

1AA2 = Bulk (TO-92)

X00619 Package information

Doc ID 15755 Rev 2 7/10

3 Package information

●Epoxy meets UL94, V0

●Lead-free packages

In order to meet environmental requirements, ST offers these devices in different grades of

ECOPACK® packages, depending on their level of environmental compliance. ECOPACK®

specifications, grade definitions and product status are available at: www.st.com.

ECOPACK® is an ST trademark.

Table 6. TO-92 (plastic) dimensions

Ref.

Dimensions

Millimeters Inches

Min. Typ. Max. Min. Typ. Max.

A - 1.35 - - 0.053 -

B - - 4.70 - - 0.185

C - 2.54 - - 0.100 -

D 4.40 - - 0.173 - -

E 12.70 - - 0.500 - -

F - - 3.70 - - 0.146

a - - 0.50 - - 0.019

Package information X00619

8/10 Doc ID 15755 Rev 2

Figure 15. SOT-223 footprint

Table 7. SOT-223 dimensions

Ref.

Dimensions

Millimeters Inches

Min. Typ. Max. Min. Typ. Max.

A1.800.071

A1 0.02 0.10 0.001 0.004

B 0.60 0.70 0.85 0.024 0.027 0.033

B1 2.90 3.00 3.15 0.114 0.118 0.124

c 0.24 0.26 0.35 0.009 0.010 0.014

D(1)

1. Do not include mold flash or protrusions. Mold flash or protrusions shall not exceed 0.15mm (0.006inches)

6.30 6.50 6.70 0.248 0.256 0.264

e 2.3 0.090

e1 4.6 0.181

E(1) 3.30 3.50 3.70 0.130 0.138 0.146

H 6.70 7.00 7.30 0.264 0.276 0.287

V 10° max

3.25

1.32

7.80

5.16

1.32

2.30 0.95

X00619 Ordering information

Doc ID 15755 Rev 2 9/10

4 Ordering information

5 Revision history

Table 8. Ordering information

Order code Marking Package Weight Base qty Delivery mode

X00619MA1AA2

X0619 MA TO-92 0.2 g

2500 Bulk

X00619MA2AL2 2000 Ammopack

X00619MA5AL2 2000 Tape and reel

X00619MN5AL2 X0 619 MN SOT-223 0.12 g 1000

Table 9. Document revision history

Date Revision Changes

26-May-2009 1 First issue

03-May-2012 2 Added SOT-223 package.

X00619

10/10 Doc ID 15755 Rev 2

Please Read Carefully:

Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the

right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any

time, without notice.

All ST products are sold pursuant to ST’s terms and conditions of sale.

Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no

liability whatsoever relating to the choice, selection or use of the ST products and services described herein.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this

document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products

or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such

third party products or services or any intellectual property contained therein.

UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED

WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED

WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS

OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.

UNLESS EXPRESSLY APPROVED IN WRITING BY TWO AUTHORIZED ST REPRESENTATIVES, ST PRODUCTS ARE NOT

RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING

APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,

DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE

GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.

Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void

any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any

liability of ST.

ST and the ST logo are trademarks or registered trademarks of ST in various countries.

Information in this document supersedes and replaces all information previously supplied.

The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.

STMicroelectronics group of companies

Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -

Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America