Voltage
400 to 1000 V Current
0.8 A
• For surface mounted application
• Glass Passivated junction chip
• Plastic material used carries Underwriters
Laboratory Classification 94V-0
• Fast switching for high efficiency
• High temperature soldering:
260 °C / 10 seconds at terminals
Dimensions in mm. CASE:
M1F(DO219AA)
Maxim un Ratings and Electrical Characteristics at 25 °C
Maximum Recurrent Peak Reverse Voltage (V)
Maximum RMS Voltage (V)
Maximum DC Blocking Voltage (V)
Maximum average Forward Rectified Current
See Fig. 1 at TL = 90 °C
VRRM
VRMS
VDC
I(AV)
MECHANICAL DATA
• Terminals: Solder plated
• Packaging: 8 mm /12 mm tape per EIA STD
RS-481
• Weight: 15 mg
Marking Code (See note)
Typical Junction Capacitance (1MHz; -4V)
Cj
Typical Thermal Resistance
(5x5 mm2 x 130 µ Copper Area)
Operating Temperature Range
Storage Temperature Range
Tstg
Rth (j-a)
0.8 A
105 °C/W
32 °C/W
-55 to + 150 °C
Feb - 08
R
30 A
50 µA
250 nS
IFSM
VF
IR
Maximum Instantaneous Forward Voltage at 1.0A
Maximum Reverse Recovery Time (0.5/1/0.25A)
Trr
Rth (j-l)
FRS1GL........FRS1ML
0.8 Amp. Surface Mounted Glass Passivated Fast Recovery Rectifier
FRS1ML
1000
700
1000
FRS1JL
600
420
600
FRS1GL
400
280
400
RMLYMRGLYM RJLYM
• Cases: Molded plastic
• Polarity: Indicated by cathode band
Note: RGLYM: R=1A, G=400V, L-LOW Profile, Y-Year Code, M-Month Code
• Built-in strain relief, ideal for automated
placement
1.3 V
10 pF
Peak Forward Surge Current 8.3 ms Single
Half Sine-Wave Superimposed on Rated Load
(Jedec Method)
Maximum DC Reverse Current @ Ta = 25 °C
at Rated DC Blocking Voltage @ Ta = 125 °C
5 µA
150 nS 500 nS
Tj
-55 to + 150 °C
Rating And Characteristic Curves
MAXIMUM NON-REPETITIVE
FORWARD SURGE CURRENT
1Number of cycles at 60 Hz
10 100
50
40
30
20
10
IFSM, peak forward current (A)
TYPICAL INSTANTANEOUS FORWARD
CHARACTERISTICS PER LEG
0.4 0.6 1 1.2 1.4
30
IF, instantaneous forward current (A)
10
1
0.1
0.001
MAXIMUM FORWARD CURRENT
DERATING CURVE
Lead temperature (ºC)
0 40 18020 60 12010080
1.2
1.0
0.8
0.6
0.4
0.2
0
IF(AV), average forward current (A)
40
TYPICAL JUNCTION CAPACITANCE
1 100
1
10
10
Cj, junction capacitance (pF)
VR, reverse voltage (V)
FRS1GL........FRS1ML
0.8 1.8
1.6
0
VF, forward voltage (V)
Feb - 08
NON INDUCTIVE
50Ω
PULSE
GENERATOR
(NOTE 2)
SET TIME BASE FOR
5/ 10ns/ cm
1cm
trr
+0.5A
0
-0.25A
-1.0A
1Ω
NON
INDUCTIVE
DUT
OSCILLOSCOPE
(NOTE 1)
NON INDUCTIVE
10
Ω
(+)
50vDC
(APPROX)
(-) (+)
(-)
REVERSE RECOVERY TIME CHARACTERISTIC AND TEST CIRCUIT DIAGRAM
NOTES: 1. Rise Time = 7ns max. Input Impedance =
1 megohm 22 pf
2. Rise Time = 10 ns max. Sourse Impedance =
50 ohms
TYPICAL REVERSE CHARACTERISTICS
20 60
30
Percent of rated peak
reverse voltage (%)
10
0.1
0.001 40 80 100 1200 140
0.01
1
RESISTIVE OR
INDUCTIVE LOAD
P.C.B. Mounted on 5x5mm
Copper Pad Areas
140 160
0.01
Tj = 125 °C
Tj = 25 °C
Pulse Width=300 µs
1% Duty Cycle
8.3ms Single Half Sine Wave
(JEDEC Method) at TL=90 °C
Tj = 150 ºC
Tj = 25 ºC
Tj = 100 ºC
IR, instantaneous reverse current (µA)
Tj = 25 °C
f = 1.0 MHz
Vsig = 50mVp-p
