FRS1GL........FRS1ML 0.8 Amp. Surface Mounted Glass Passivated Fast Recovery Rectifier Dimensions in mm. Voltage 400 to 1000 V CASE: M1F(DO219AA) Current 0.8 A R * For surface mounted application * Glass Passivated junction chip * Built-in strain relief, ideal for automated placement * Plastic material used carries Underwriters Laboratory Classification 94V-0 * Fast switching for high efficiency * High temperature soldering: 260 C / 10 seconds at terminals MECHANICAL DATA * Cases: Molded plastic * Terminals: Solder plated * Polarity: Indicated by cathode band * Packaging: 8 mm /12 mm tape per EIA STD RS-481 * Weight: 15 mg Maximun Ratings and Electrical Characteristics at 25 C FRS1GL FRS1JL FRS1ML RGLYM RJLYM RMLYM Marking Code (See note) VRRM Maximum Recurrent Peak Reverse Voltage (V) 400 600 1000 VRMS Maximum RMS Voltage (V) 280 420 700 VDC Maximum DC Blocking Voltage (V) 400 600 1000 I(AV) Maximum average Forward Rectified Current See Fig. 1 at TL = 90 C 0.8 A IFSM Peak Forward Surge Current 8.3 ms Single Half Sine-Wave Superimposed on Rated Load (Jedec Method) 30 A VF Maximum Instantaneous Forward Voltage at 1.0A 1.3 V IR Maximum DC Reverse Current @ Ta = 25 C at Rated DC Blocking Voltage @ Ta = 125 C 5 A 50 A Trr Maximum Reverse Recovery Time (0.5/1/0.25A) Cj Typical Junction Capacitance (1MHz; -4V) Rth (j-a) Typical Thermal Resistance 2 150 nS 250 nS 500 nS 10 pF 105 C/W Rth (j-l) (5x5 mm x 130 Copper Area) 32 C/W Tj Operating Temperature Range -55 to + 150 C Tstg Storage Temperature Range -55 to + 150 C Note: RGLYM: R=1A, G=400V, L-LOW Profile, Y-Year Code, M-Month Code Feb - 08 FRS1GL........FRS1ML Rating And Characteristic Curves MAXIMUM FORWARD CURRENT DERATING CURVE TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS PER LEG IF, instantaneous forward current (A) IF(AV), average forward current (A) 1.2 RESISTIVE OR INDUCTIVE LOAD 1.0 0.8 0.6 0.4 0.2 P.C.B. Mounted on 5x5mm Copper Pad Areas 0 30 10 Tj = 125 C 1 Tj = 25 C 0.1 0.01 Pulse Width=300 s 1% Duty Cycle 0.001 0.4 0.6 0.8 0 20 40 60 80 100 120 140 160 180 Lead temperature (C) TYPICAL JUNCTION CAPACITANCE 40 50 8.3ms Single Half Sine Wave (JEDEC Method) at TL=90 C Cj, junction capacitance (pF) IFSM, peak forward current (A) 1.2 1.4 1.6 1.8 VF, forward voltage (V) MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 40 30 20 10 Tj = 25 C f = 1.0 MHz Vsig = 50mVp-p 10 0 1 10 1 100 10 1 Number of cycles at 60 Hz TYPICAL REVERSE CHARACTERISTICS IR, instantaneous reverse current (A) 1 30 REVERSE RECOVERY TIME CHARACTERISTIC AND TEST CIRCUIT DIAGRAM 50 NON INDUCTIVE 10 100 VR, reverse voltage (V) trr 10 NON INDUCTIVE +0.5A Tj = 150 C (-) DUT 1 Tj = 100 C 0.1 PULSE GENERATOR (NOTE 2) (+) 50vDC (APPROX) (-) 1 NON INDUCTIVE OSCILLOSCOPE (NOTE 1) 0 -0.25A (+) -1.0A 0.01 Tj = 25 C NOTES: 1. Rise Time = 7ns max. Input Impedance = 1 megohm 22 pf 2. Rise Time = 10 ns max. Sourse Impedance = 50 ohms 1cm SET TIME BASE FOR 5/ 10ns/ cm 0.001 0 20 40 60 80 100 120 140 Percent of rated peak reverse voltage (%) Feb - 08