Dimensions are in inches [mm]
HG Series
2 / 27
www.hypertronics.com
HyperGrip®- Push/Pull
Plastic Circular Connectors
• For medical and other high reliability applications
• Customer-keyable (6 positions)
• 12 (HG2), 19 (HG3), 33 (HG4), or 80 (HG6)
contact positions
• Other contact configurations available upon request
• 1 Amp per contact
• Color coding
• Overmoldable plug design
• Front or rear panel mount receptacle design
• High-end engineering plastic components meet medical
sterilizing and cleaning requirements
• Crimp and solder cup contact terminations available
(printed circuit tails available on panel mount receptacle)
• Sealing option: IP67 (temporary immersion) when mated
• Meets fingerproofing requirements of UL544
and IEC60601
“E” Receptacle
“P” Plug
Plug/Receptacle Mated with Strain Relief
HG2 HG3 HG4
AØ1.014
[25.76]
Ø1.172
[29.77]
Ø1.250
[31.77]
B1.220
[30.98]
1.137
[28.87]
1.137
[28.87]
CØ0.866
[22.00]
Ø1.007
[25.59]
Ø1.090
[27.80]
D0.272
[6.91]
0.272
[6.91]
0.272
[6.91]
E1.637
[41.59]
1.637
[41.59]
1.637
[41.59]
F3.265
[82.93]
3.500
[88.88]
3.500
[88.88]
GØ0.502
[12.75]
Ø0.650
[16.50]
Ø0.710
[18.15]
HØ0.656
[16.66]
Ø0.800
[20.36]
Ø0.880
[22.47]
J2.700
[68.56]
2.890
[73.47]
2.890
[73.47]
K3.724
[94.60]
3.880
[98.45]
3.880
[98.45]
HYP_08_2sec11.qxd:Layout 1 7/31/08 10:49 AM Page 27
HG Series
2 / 28 www.hypertronics.com
Dimensions are in inches [mm]
HG6
AØ2.026
[51.45]
B1.452
[36.87]
CØ1.789
[45.45]
D0.669
[17.00]
E2.224
[56.50]
F4.950
[125.72]
GØ1.452
[36.88]
HØ1.467
[37.00]
J4.371
[111.02]
K5.265
[133.72]
Plug/Cable Receptacle Mated
HG2 Only
“C” Cable Receptacle
HG2 Only
HG6 Only
NOTE:
HG6 drawings are reduced to 50 percent and show optional strain relief.
HYP_08_2sec11.qxd:Layout 1 7/31/08 10:49 AM Page 28
Dimensions are in inches [mm]
HG Series
2 / 29
www.hypertronics.com
Front Mounting
Installation
Rear Mounting
Installation
General Specifications - HyperGrip
Contact Diameter 0.016 [0.40]
Current Rating 1 Amp
Contact Resistance < 8 milliohms
Contact Extraction Force Each 0.5 – 1.6 oz.
Contact Life Cycles Up to 100,000
Plug Cycle Life Up to 20,000
Breakdown Voltage Between Contacts > 1000V
Dielectric Withstanding Voltage > 750V
Contact
Material and Plating
Sockets:
Beryllium copper wires and brass body components
50µin gold over nickel on wires, gold flash over nickel
on termination
Pins:
Brass
50µin gold over nickel
Insulation Resistance > 5 x 104megohms at 500 VDC
Temperature Rating
Polyetherimide, LCP, Silicone
-40º C to 125º C
Up to 185º C processing
Sterilization Steam autoclave, Gamma, ETO
HYP_08_2sec11.qxd:Layout 1 7/31/08 10:49 AM Page 29
HG Series
2 / 30 www.hypertronics.com
Dimensions are in inches [mm]
Ordering Information
HG 2 P 4 G M R HG 12 043
Size Size: (2), (3), (4), (6)
HyperGrip
Plastic Circular
Color
Coding
G = LT Gray (standard)
D = Blue
M* = Brown
R = Red
V = Green
B* = Black
Y = Yellow
W* = White
N1= No color code
Outer
Shell Color G = LT gray
Contact
Gender
F = Female sockets
(standard receptacle)
M =Male pins (standard plug)
N = No contacts
Strain
Relief Size
Options
0 = No strain relief
3 = 3.00 - 4.50mm cable dia. range (HG2 only - optional)
4 = 4.50 - 6.50mm cable dia. range (HG2 only - standard)
5 = 7.00 - 9.00mm cable dia. range (HG3 only)
6 = 9.00 - 11.00mm cable dia. range (HG4 only)
Sealing
Option
1 = Sealed
4 = Unsealed
Type P = Plug
E = Receptacle/panel
C = Receptacle/cable
(C available on HG2 only)
Plating H = Pins: 50µin gold on
contact surfaces, gold flash
on terminations
AH = Sockets: 50µin gold
on contact surfaces, gold
flash on terminations
(Omit for no contacts)
Termination S = Solder cup (optional)
R = Crimp (standard)
D = Straight dip printed circuit (optional)
Panel receptacle only
(Omit for no contacts)
Accessories Part Numbers
Crimp Tool
Positioner
Insertion Tool
Receptacle Insulator Extraction Tool
AFM8 or M22520/2-01
T2030
T1916
T2057 (HG2)
T2085-20 (HG3)
T2085-34 (HG4)
T2085-85 (HG6)
Available Contacts Wire Gauge (AWG)
Female Receptacle - Standard
Crimp Socket (standard)
Solder Cup Socket (optional)
Printed Circuit Terminal Socket (optional)
26 – 28
26 Max.
N/A
Male Plug - Standard
Crimp Pin (standard)
Solder Cup Pin (optional)
26 – 28
26 Max.
Male Receptacle - Special Order Only
Crimp Pin
Solder Cup Pin
Printed Circuit Terminal Pin
26 – 28
26 Max.
N/A
Female Plug - Special Order Only
Crimp Pin
Solder Cup Pin
26 – 28
26 Max.
Size HG2 HG3 HG4 HG6
Contact
Diameter 0.40mm 0.40mm 0.40mm 0.40mm
Positions 12 19 33 80
* Color is special order only.
NOTE:
1) If N applies: Plug and cable receptacle - specify no strain relief.
Panel receptacle - specify unsealed (no panel color code).
HYP_08_2sec11.qxd:Layout 1 7/31/08 10:49 AM Page 30
Dimensions are in inches [mm]
HG Series
2 / 31
www.hypertronics.com
Keying Position A
(Receptacle Wiring End)
Keying Position B
(Receptacle Wiring End)
NOTE:
6 different keying positions possible - A through F.
HG6
HG4
HG3
HG2
HYP_08_2sec11.qxd:Layout 1 7/31/08 10:49 AM Page 31
HG Series
2 / 32 www.hypertronics.com
Dimensions are in inches [mm]
HG2 Panel Receptacles
12 Position Printed Circuit Board Cutout
“A” Key (D Termination)
12 Position Printed Circuit Board Cutout
“B” Key (D Termination)
HYP_08_2sec11.qxd:Layout 1 7/31/08 10:49 AM Page 32
Dimensions are in inches [mm]
HG Series
2 / 33
www.hypertronics.com
HG3 Panel Receptacles
19 Position Printed Circuit Board Cutout
“A” Key (D Termination)
19 Position Printed Circuit Board Cutout
“B” Key (D Termination)
HYP_08_2sec11.qxd:Layout 1 7/31/08 10:49 AM Page 33
HG Series
2 / 34 www.hypertronics.com
Dimensions are in inches [mm]
HG4 Panel Receptacles
33 Position Printed Circuit Board Cutout
“A” Key (D Termination)
33 Position Printed Circuit Board Cutout
“B” Key (D Termination)
HYP_08_2sec11.qxd:Layout 1 7/31/08 10:49 AM Page 34
Dimensions are in inches [mm]
HG Series
2 / 35
www.hypertronics.com
HG6 Panel Receptacles
80 Position Printed Circuit Board Cutout
“A” Key (D Termination)
HYP_08_2sec11.qxd:Layout 1 7/31/08 10:49 AM Page 35
HG Series
2 / 36 www.hypertronics.com
Dimensions are in inches [mm]
Panel Cutouts
HG2
HG3
HG4
HG6
HYP_08_2sec11.qxd:Layout 1 7/31/08 10:49 AM Page 36