5/29/13 MW40 - ICCNexergy MW40 Series 40 Watt Medical Desktop Power Supply High Efficiency: Level V Fully Regulated DC Output Lifetime Expectation >5 years Hold-up Time >16ms at full load Medical Approval - EN60601-1 Class I Elpac Part Number Output Voltage Output Current Peak Total Typical Current1 Regulation2 Efficiency3 MW4009-760F-NC-BK 9.0V 4.4A 5.3A 5% 84% MW4012-760F-NC-BK 12.0V 3.3A 4.0A 5% 86% MW4015-760F-NC-BK 15.0v 2.6A 3.2A 5% 87% MW4018-760F-NC-BK 18.0V 2.2A 2.6A 5% 87% MW4024-760F-NC-BK 24.0V 1.7A 2.0A 5% 88% Notes 1 Maximum peak load (48W) lasting 500ms with a maximum 10% duty cycle. 2 Includes initial setting, line regulation, load, regulation, and thermal drift. 3 Typical at 115VAC Input Input Voltage 85 - 264VAC 100 - 240VAC Nominal Input Frequency 47 - 63Hz Input Current <1A rms Inrush Current <37A at 230VAC cold start Zero Load Pow er Consumption 0.3W Touch Leakage Current <50A @ 132VAC @ 60Hz <75A @ 264VAC @ 60Hz Output Output Voltage See Table Total Regulation +/-5% Minimum Load No minimum load required Start-Up Delay <.25s www.iccnexergy.com/elpac/medical-power-supplies/external/mw40/ 1/3 5/29/13 MW40 - ICCNexergy Hold-Up Time >16ms Ripple & Noise <1% pk-pk ** * Over Voltage Protection 110-135% Over Temperature Protection Active - Recoverable; plus Passive - Non Recoverable Over Current Protetion 120 - 180% Short Circuit Protection shutdow n, auto-restart (hiccup mode) Notes * Ripple and noise measured with 20MHz bandwidth; 10F tantalum capacitor in parallel with a 0.1F ceramic capacitor. General Efficiency Avg Efficiency 86.4% @ 115VAC; 85.7% @ 230VAC MTBF min. 200,000 hours demonstrated Size 5.0 (127.0mm) x 3.0 (76.2 mm) x 1.3 (33.0mm) Weight 0.8 lbs (.36 kg) Environmental Operating Temperature 0 - 40C, linearly derated to 50% load at 60C Storage Temperature -40C to +85C Relative Humidity 5-95%, non-condensing Cooling Natural Convection Vibration All units production tested to 19.6m/s2 EMC & Safety Emissions FCC class B, CISPR11 class B EN61000-3-2, -3 Immunity EN61000-4-2, -3, -4, -5, -6, -8, -11 Certified by TUV to the follow ing: cTUVus UL 60601-1 CAN/CSA-22.2 No.601.1-M90 CB per IEC60601-1 CE marked to LVD Input Configuration Standard Input Cable Not Provided Connection on Pow er Supply Body IEC 320 C14 Receptacle www.iccnexergy.com/elpac/medical-power-supplies/external/mw40/ 2/3 5/29/13 MW40 - ICCNexergy Output Configuration Standard Output Cable 6 ft. Cord Size 2x16aw g Connector (PSU side) Sw itchcraft 760 or equivalent Mating Connector Sw itchcraft 712A or equivalent Output Pin Assignments Center +v1 Outside Return MW40 | ICCNEXERGY | (c) 2012 | www.iccnexergy.com/elpac/medical-power-supplies/external/mw40/ 3/3