The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. 2.5mm Pitch Connector for Discrete Wire Connection HNC Series Features 1. Full Lock Mechanism The connector is equipped with the full lock mechanism so as not be removed, unless locks are reset on both sides. This mechanism is activated effectively to prevent extraction by cable hooking or other causes. 2. Thin Type Connector Mounting height when the connector is used at the right angle : 4.8mm 3. Mechanism to Prevent Mis-insertion This thin type connector is equipped with the mechanism to prevent misinsertion. 4. Tin Plating and Gold Plating Variation Two kinds of tin plating and gold plating types are available, and can be chosen according to application. The tin plating is also set to a light operating touch. Applications Various business equipment, financial terminals Mechanism to prevent false-insertion Full lock mechanism B169 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or Connector will be discontinued Please check theConnection products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. HNC Series2.5mm Pitch forsoon. Discrete Wire Product Specifications AWG 22 : 3A AWG 24 : 3A Current rating Rating AWG 26 : 2A (Note1) AWG 28 : 1A AWG 30 : 0.5A Voltage rating 250V AC Item Operating Temperature Range -25 to +85c (Note2) Operating Moisture Range -40 to 80% Storage Temperature Range -10 to +60c (Note3) Storage Moisture Range -40 to 70% (Note3) Specification Condition 1. Insulation Resistance 1000M ohms min. 500V DC 2. Withstanding voltage No flashover or insulation breakdown. 1000V AC/1 minute 3. Contact Resistance 10m ohms Max 1A 4. Insertor/Extraction Force 0.4N (40gf) min.,4.4N (450gf) max. Measure at the square steel pin of 0.6350.002mm 5. Vibration Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. No electrical discontinuity of 1s or more 6. Humidity (Steady state) Contact resistance: 10m ohms max.Insulation resistance: 1000M ohms min. 96 hours at temperature of 402c and humidity of 90% to 95% 7. Temperature Cycle Contact resistance: 10m ohms max:Insulation resistance: 1000M ohms min. (-85c: 30 minutes 5 to 35c: 10 minutes) 5 cycles Tin plating 8. Durability (Mating/un-mating) Contact resistance: 20m ohms max. 9. Resistance to Soldering heat (-25c: 30 minutes 5 to 35c: 10 minutes : 30 cycles Gold plating : 50 cycles Flow: 250c for 5 seconds No deformation of components affecting performance. Manual soldering: 300c for 2 seconds Note 1: The rated current will be changed according to cable sizes for use. The header rating only t is 3A. Note 2: Includes temperature rise caused by current flow. Note 3: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. Note 4: Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for a specific part number shown. Material Product Crimping Socket Contact Pin Header Part Insulator Contact Insulator Contact Material Polyamide Phosphor Bronze Polyamide Brass Finish Black Tin plated or gold plated Black Tin plated or gold plated Ordering Information Crimping Plug HNC 2 - 2.5 P - * DSL q q Series Name w Series No. e Contact Pitch r Connector Type S : Socket P : Pin Header Contact w e : HNC : 2, 1 : 2.5mm t y t Number of Contacts : 2 to 8,10,12,15 y Contact Type None : Crimping socket DS : Straight DSL : Right angle HNC - 2.5S - C - A q q Type: 2.5mm pitch socket w Packaging Type C : Reel D : Bag B170 r w e e Applicable cable size A : AWG22 to 26 B : AWG26 to 30 Remarks UL94V-2 ----- UL94V-2 ----- The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose RoHS search at Pitch www.hirose-connectors.com, contact yourWire Hirose sales representative. HNCwebsite Series2.5mm Connector for or Discrete Connection Crimping Socket [Figure 1] [Figure 2] Unit: mm Part Number CL No. Number of Contacts A B C HNC2-2.5S- 2 218-0011-1 2 12.4 6 2.5 HNC2-2.5S- 3 218-0022-8 3 14.9 8.5 5 HNC2-2.5S- 4 218-0039-0 4 17.4 11 HNC2-2.5S- 5 218-0027-1 5 19.9 13.5 10 HNC2-2.5S- 6 218-0042-5 6 22.4 16 12.5 HNC2-2.5S- 7 218-0030-6 7 24.9 18.5 15 HNC2-2.5S- 8 218-0014-0 8 27.4 21 17.5 HNC2-2.5S-10 218-0017-8 10 32.4 26 22.5 HNC1-2.5S-12 218-0008-7 12 37 31 27.5 Figure 2 HNC2-2.5S-15 218-0045-3 15 44.9 38.5 35 Figure 1 Dimensions RoHS 7.5 Figure 1 Yes Note1: Please order a quantity multiplied by 100 pcs. (Not per bag, but per pcs.) Note2: The series name of 12 contacts connector is HNC1, and partially will be changed in the style. B171 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or Connector will be discontinued Please check theConnection products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. HNC Series2.5mm Pitch forsoon. Discrete Wire Straight Pin Header [Figure 3] Board Through-hole Diameter: o1.1++00.1 [Figure 4] Unit: mm B172 Part Number CL No. Number of Contacts A HNC2-2.5P- 2DS(**) 218-0012-4-** 2 12.5 HNC2-2.5P- 3DS(**) 218-0023-0-** 3 15 10.4 HNC2-2.5P- 4DS(**) 218-0040-0-** 4 17.5 12.9 HNC2-2.5P- 5DS(**) 218-0028-4-** 5 20 15.4 10 HNC2-2.5P- 6DS(**) 218-0043-8-** 6 22.5 17.9 HNC2-2.5P- 7DS(**) 218-0031-9-** 7 25 HNC2-2.5P- 8DS(**) 218-0015-2-** 8 HNC2-2.5P-10DS(**) 218-0018-0-** 10 HNC1-2.5P-12DS(**) 218-0009-0-** 12 B C 7.8 Specific No. Dimensions Tin plating Gold plating 2.5 55 02 5 55 02 7.5 55 01 55 02 12.5 55 01 20.4 15 55 02 27.5 22.8 17.5 55 02 32.5 27.8 22.5 55 02 35.5 32.8 27.5 55 02 Figure 4 45 15 55 40.4 35 01 HNC2-2.5P-15DS(**) 218-0046-6-** Note1: Please order a quantity multiplied by 100 pcs. (Not per bag, but per piece) Note2: The series name of the 12 contacts connector is HNC1 and the style will be partially changed. Figure 3 RoHS Figure 3 Yes The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose RoHS search at Pitch www.hirose-connectors.com, contact yourWire Hirose sales representative. HNCwebsite Series2.5mm Connector for or Discrete Connection Right Angle Pin Header [Figure 5] Board Through-hole Diameter: o1.1++00.1 [Figure 6] Unit: mm Part Number CL No. Number of Contacts A HNC2-2.5P- 2DSL(**) 218-0013-7-** 2 12.5 HNC2-2.5P- 3DSL(**) 218-0024-3-** 3 15 10.4 HNC2-2.5P- 4DSL(**) 218-0041-2-** 4 17.5 12.9 HNC2-2.5P- 5DSL(**) 218-0029-7-** 5 20 15.4 10 HNC2-2.5P- 6DSL(**) 218-0044-0-** 6 22.5 17.9 HNC2-2.5P- 7DSL(**) 218-0032-1-** 7 25 HNC2-2.5P- 8DSL(**) 218-0016-5-** 8 HNC2-2.5P-10DSL(**) 218-0019-3-** 10 HNC1-2.5P-12DSL(**) 218-0010-9-** 12 B C 7.8 Specific No. Dimensions Tin plating Gold plating 2.5 55 02 5 55 02 7.5 55 01 55 02 12.5 55 01 20.4 15 55 02 27.5 22.8 17.5 55 02 32.5 27.8 22.5 55 02 35.5 32.8 27.5 55 02 Figure 6 45 15 55 40.4 35 01 HNC2-2.5P-15DSL(**) 218-0047-9-** Note1: Please order a quantity multiplied by 100 pcs. (Not per bag, but per piece) Note2: The series name of the 12 contacts connector is HNC1 and the style will be partially changed. Figure 5 RoHS Figure 5 Yes B173 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or Connector will be discontinued Please check theConnection products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. HNC Series2.5mm Pitch forsoon. Discrete Wire Crimping Contact for Socket Applicable Cable (Tin Plated Annealing Copper Wire) Conductor Size (Contact wire construction) Jacket Diameter UL1061, UL1007 AWG 22 (17pieces/0.16mm) AWG 24 (11pieces/0.16mm) O1.35 to O1.7mm Strip Length 2.8 to 3.3mm AWG 26 (07pieces/0.16mm) AWG 28 (07pieces/0.127mm) AWG 30 (07pieces/0.1mm) Recommended Cable O1.0 to O1.35mm Note: If other cables are used instead of the applicable cable, please contact Hirose sales department. Unit: mm Conductor Size Part Number CL No. HNC-2.5S-D-A(**) 218-0037-5-** HNC-2.5S-C-A(**) 218-0021-5-** HNC-2.5S-D-B(**) 218-0038-8-** HNC-2.5S-C-B(**) 218-0020-2-** Jacket A Diameter AWG 22 to 26 O1.35 to 1.7mm AWG 26 to 30 O1.0 to 1.35mm B Packaging Type Quantity 1.8 2.6 Bag 100 1.8 2.6 Reel 10,000 1.5 1.7 Bag 100 1.5 1.7 Reel 10,000 Specific No. Tin plating Gold plating 15 02 Applicable Crimping Tool Type Applicator Press Main Unit Manual Crimping Tool Extraction Tool Part Number CL No. Applicable Contact AP105-HNC 901-4502-0 HNC-2.5S-C-A(**)/HNC-2.5S-C-B(**) CM105 901-0005-4 ------------------------ TC-HNC-B 250-0005-7 HNC-2.5S-D-B(**) TC-HNC-A 250-0006-0 HNC-2.5S-D-A(**) DF1-C-PO 550-0177-7 HNC-2.5S-C-A/HNC-2.5S-C-B(**) Note: If a trouble has occurred due to tools which are not designated by Hirose, Hirose won't guarantee any product. Application Pattern B174 RoHS Yes The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose RoHS search at Pitch www.hirose-connectors.com, contact yourWire Hirose sales representative. HNCwebsite Series2.5mm Connector for or Discrete Connection BPrecautions 1. Recommended Soldering Condition Flow: 250c for 5 seconds Manual soldering: 300c for 2 seconds 2. Cleaning Condition Refer to Nylon Connector Use Hand book. 3. Connection Condition Refer to Nylon Connector Use Hand book. B175 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Hirose Electric: HNC2-2.5P-2DSL(55) HNC2-2.5P-3DSL(55) HNC1-2.5P-12DS(02) HNC1-2.5P-12DS(07) HNC1-2.5P-12DS(55) HNC1-2.5P-12DSL(02) HNC1-2.5P-12DSL(07) HNC1-2.5P-12DSL(55) HNC-2.5S-C-A(03) HNC-2.5S-C-B(03) HNC2.5S-SP HNC2-2.5P-10DS(01) HNC2-2.5P-10DS(02) HNC2-2.5P-10DS(07) HNC2-2.5P-10DS(55) HNC2-2.5P10DSL(01) HNC2-2.5P-10DSL(02) HNC2-2.5P-10DSL(07) HNC2-2.5P-10DSL(55) HNC2-2.5P-15DS(01) HNC22.5P-15DS(07) HNC2-2.5P-15DS(55) HNC2-2.5P-15DSL(01) HNC2-2.5P-15DSL(07) HNC2-2.5P-15DSL(55) HNC22.5P-2DS(01) HNC2-2.5P-2DS(02) HNC2-2.5P-2DS(05) HNC2-2.5P-2DS(07) HNC2-2.5P-2DS(54) HNC2-2.5P2DS(55) HNC2-2.5P-2DSL(01) HNC2-2.5P-2DSL(02) HNC2-2.5P-2DSL(05) HNC2-2.5P-2DSL(07) HNC2-2.5P2DSL(54) HNC2-2.5P-3DS(01) HNC2-2.5P-3DS(02) HNC2-2.5P-3DS(07) HNC2-2.5P-3DS(12) HNC2-2.5P-3DS(54) HNC2-2.5P-3DS(55) HNC2-2.5P-3DSL(01) HNC2-2.5P-3DSL(02) HNC2-2.5P-3DSL(05) HNC2-2.5P-3DSL(07) HNC2-2.5P-3DSL(54) HNC2-2.5P-4DS(01) HNC2-2.5P-4DS(07) HNC2-2.5P-4DS(54) HNC2-2.5P-4DS(55) HNC22.5P-4DSL(05) HNC2-2.5P-4DSL(07) HNC2-2.5P-4DSL(54) HNC2-2.5P-4DSL(55) HNC2-2.5P-5DS(01) HNC2-2.5P5DS(02) HNC2-2.5P-5DS(07) HNC2-2.5P-5DS(54) HNC2-2.5P-5DS(55) HNC2-2.5P-5DSL(01) HNC2-2.5P5DSL(02) HNC2-2.5P-5DSL(05) HNC2-2.5P-5DSL(55) HNC2-2.5P-6DS(01) HNC2-2.5P-6DS(07) HNC2-2.5P6DS(55) HNC2-2.5P-6DSL(01) HNC2-2.5P-6DSL(55) HNC2-2.5P-7DS(01) HNC2-2.5P-7DS(02) HNC2-2.5P7DS(07) HNC2-2.5P-7DS(55) HNC2-2.5P-7DSL(01) HNC2-2.5P-7DSL(02) HNC2-2.5P-7DSL(07) HNC2-2.5P7DSL(55) HNC2-2.5P-8DS(01) HNC2-2.5P-8DS(02) HNC2-2.5P-8DS(07) HNC2-2.5P-8DS(55) HNC2-2.5P8DSL(01) HNC2-2.5P-8DSL(02) HNC2-2.5P-8DSL(05) HNC2-2.5P-8DSL(55) HNC-2.5S-C-A(02) HNC-2.5S-C-A(12) HNC-2.5S-C-A(15) HNC-2.5S-C-B(01) HNC-2.5S-C-B(02) HNC-2.5S-C-B(15) HNC-2.5S-D-A(05) HNC-2.5S-DA(07) HNC-2.5S-D-B(01) HNC-2.5S-D-B(02) HNC-2.5S-D-B(05) HNC-2.5S-D-B(15) HNC-2.5S-C-A(01) HNC2-2.5S2 HNC2-2.5S-3