BAS16WS-G
www.vishay.com Vishay Semiconductors
Rev. 1.1, 13-May-13 1Document Number: 85152
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Small Signal Fast Switching Diode
MECHANICAL DATA
Case: SOD-323
Weight: approx. 4 mg
Packaging codes/options:
18/10K per 13" reel (8 mm tape), 10K/box
08/3K per 7" reel (8 mm tape), 15K/box
FEATURES
Silicon epitaxial planar diode
Fast switching diode
AEC-Q101 qualified
Base P/N-G3 - green, commercial grade
Material categorization: For definitions of
compliance please see
www.vishay.com/doc?99912
PARTS TABLE
PART ORDERING CODE INTERNAL CONSTRUCTION TYPE MARKING REMARKS
BAS16WS-G BAS16WS-G3-08 or BAS16WS-G3-18 Single diode AK Tape and reel
ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)
PARAMETER TEST CONDITION SYMBOL VALUE UNIT
Reverse voltage VR75 V
Repetitive peak reverse voltage VRRM 100 V
Forward current (continuous) IF250 mA
Non-repetitive peak forward current
t = 1 μs IFSM 2A
t = 1 ms IFSM 1A
t = 1 s IFSM 0.5 A
Power dissipation Ptot 200 mW
THERMAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER TEST CONDITION SYMBOL VALUE UNIT
Thermal resistance junction to ambient air RthJA 650 K/W
Junction temperature Tj150 °C
Storage temperature range Tstg - 65 to + 150 °C
Operating temperature range Top - 55 to + 150 °C
BAS16WS-G
www.vishay.com Vishay Semiconductors
Rev. 1.1, 13-May-13 2Document Number: 85152
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
Fig. 1 - Forward Characteristics
Fig. 2 - Dynamic Forward Resistance vs. Forward Current
Fig. 3 - Admissible Power Dissipation vs. Ambient Temperature
Fig. 4 - Relative Capacitance vs. Reverse Voltage
ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT
Forward voltage
IF = 1 mA VF0.715 V
IF = 10 mA VF0.855 V
IF = 50 mA VF1V
IF = 150 mA VF1.250 V
Leakage current
VR = 25 V, TJ = 150 °C IR30 μA
VR = 75 V IRA
VR = 75 V, TJ = 150 °C IR50 μA
Diode capacitance VR = 0, f = 1 MHz CD2pF
Reverse recovery time IF = 10 mA, IR = 10 mA,
iR = 1 mA, RL = 100 trr 6ns
18105
I
F
(mA)
V
F
(V)
T
j
= 100 °C
T
j
= 25 °C
10- 2
10- 1
102
103
1
10
120
17438
f = 1 kHz
Tj = 25 °C
IF (mA)
Rf (Ω)
10
102
103
104
10-2 10-1 110
2
10
2
5
2
5
2
5
2
5
18185
P
tot
(mW)
T
amb
(°C)
0
100
400
500
200
300
100 2000
17440 VR (V)
0.7
0.8
0.9
1.0
1.1 f = 1 MHz
Tj = 25 °C
2086410
CD (VR)
CD (0 V)
BAS16WS-G
www.vishay.com Vishay Semiconductors
Rev. 1.1, 13-May-13 3Document Number: 85152
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Fig. 5 - Leakage Current vs. Junction Temperature
PACKAGE DIMENSIONS in millimeters (inches): SOD-323
17441 Tj (°C)
IR (nA)
10
102
103
104
100 200
2
5
2
5
2
5
2
5
V
R
= 20 V
1
0
Foot print recommendation:
Rev. 5 - Date: 23.Sept.2009
17443
Document no.:S8-V-3910.02-001 (4)
0.6 (0.024)
0.6 (0.024)0.6 (0.024)
1.6 (0.063)
0.10 (0.004)
Cathode bar
0.20 (0.008)
0.40 (0.016)
2.50 (0.098)
1.1 (0.043)
1.5 (0.059)
2.85 (0.112)
1.60 (0.063)
1.95 (0.077)
0.15 (0.006)
0.1 (0.004) max.
1.15 (0.045)
0.8 (0.031)
Created - Date: 24.August.2004
0.40 (0.016)
0.25 (0.010)
0.2 (0.008)
to 8°
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 02-Oct-12 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Vishay:
BAS16WS-G3-08 BAS16WS-G3-18