/&( Transient Voltage Suppressors Series MERITEK UL E223045 FEATURES Plastic package has Underwriters Laboratory Flammability Classification 94V-O. Glass passivated junction. 1,500W peak pulse power capability with a 10/1000s waveform, repetition rate(duty cycle): 0.05%. Excellent clamping capability. Low incremental surge resistance. Fast response time: typically less than 5.0ns from 0 volt to VBR min. Ideal for data line applications. DO-201 High temperature soldering guaranteed: 265/10 seconds/.375", (9.5mm) lead length, 5lbs., (2.3kg) tension. ECHANICAL DATA MM Case: JEDEC DO-201 Molded Plastic. Terminals: Axial leads, solderable per MIL-STD-750, Method 2026. Polarity: Color band denotescathode. Mounting Position: Any. Weight: 0.045 ounce, 1.2 grams. MAXIMUM RATINGS AND CHARACTERISTICS M Ratings at 25 ambient temperature unless otherwise specified. RATING SYMBOL VALUE Peak Pulse Power Dissipation on 10/1000s waveform. (Note1Fig.1) PPPM Peak Pulse Current on 10/1000s waveform. (Note1Fig.3) IPPM6He Table Steady State Power Dissipation at TL =75Lead length .375" (9.5mm). (Fig.5) Operating junction and Storage Temperature Range. PM(AV) TJ , TSTG Minimum 1500 UNIT Watts Amps 6.5 Watts -55 to +175 Note: Non-repetitive current pulse, per Fig. 3 and derated above TA = 25 per Fig. 2. All specifications are subject to change without notice. 1 Rev 7 /&( Transient Voltage Suppressors Series MERITEK P d PACKAGE DIMENSIONS DIA. s DIA. L L DO-201 Millimeters Item E T Inches Min. Max. Min. Max. L 25.40 - 1.000 - T 7.20 9.50 0.285 0.375 d 4.80 5.30 0.190 0.210 s 0.96 1.07 0.038 0.042 SPECIFICATIONS Reverse Breakdown Breakdown Part Number Stand-Off Voltage Voltage Voltage Min.@IT Max.@IT VRWM(V) Maximum Maximum Maximum Maximum Working Working Peak Test Reverse Junction Inverse Blocking Inverse Current Leakage Current Voltage Capacitance Blocking Leakage Blocking @VRWM Per fig.3 @IPP @0V Voltage Current Voltage IR(A) IPP(A) VC(V) (pF) VWIB(V) IIB(mA) VPIB(V) VBR MIN.(V) VBR MAX.(V) IT(mA) Peak Pulse Clamping LCE6.5A 6.5 7.22 7.98 10 1000 100 11.2 100 75 1.0 100 LCE7.0A 7.0 7.78 8.60 10 500 100 12.0 100 75 1.0 100 LCE7.5A 7.5 8.33 9.21 10 250 100 12.9 100 75 1.0 100 LCE8.0A 8.0 8.89 9.83 1 100 100 13.6 100 75 1.0 100 LCE8.5A 8.5 9.44 10.40 1 50 100 14.4 100 75 1.0 100 LCE9.0A 9.0 10.00 11.10 1 10 97 15.4 100 75 1.0 100 LCE10A 10.0 11.10 12.30 1 5 88 17.0 100 75 1.0 100 LCE11A 11.0 12.20 13.50 1 1 82 18.2 100 75 1.0 100 LCE12A 12.0 13.30 14.70 1 1 75 19.9 100 75 1.0 100 LCE13A 13.0 14.40 15.90 1 1 70 21.5 100 75 1.0 100 LCE14A 14.0 15.60 17.20 1 1 65 23.2 100 75 1.0 100 LCE15A 15.0 16.70 18.50 1 1 61 24.4 100 75 1.0 100 LCE16A 16.0 17.80 19.70 1 1 57 26.0 100 75 1.0 100 LCE17A 17.0 18.90 20.90 1 1 54 27.6 100 75 1.0 100 LCE18A 18.0 20.00 22.10 1 1 51 29.2 100 75 1.0 100 LCE20A 20.0 22.20 24.50 1 1 46 32.4 100 75 1.0 100 LCE22A 22.0 24.40 26.90 1 1 42 35.5 100 75 1.0 100 LCE24A 24.0 26.70 29.50 1 1 39 38.9 100 75 1.0 100 LCE26A 26.0 28.90 31.90 1 1 36 42.1 100 75 1.0 100 LCE28A 28.0 31.10 34.40 1 1 33 45.5 100 75 1.0 100 2 Rev 7 /&( Transient 9ROWDJH6XSSUHVVRUV Series MERITEK RATING AND CHARACTERISTIC CURVES (TA: 25C UNLESS OTHERWISE SPECIFIED) Figure 1 - Peak Pulse Power Rating Curve Figure 2 - Pulse Derating Curve 100 Percentage of Rated Power (%) PPPM - Peak Pulse Power (kW) 1000 100 10 1 0.1 0.000001 0.00001 0.0001 A verage Power 75 50 25 0 0.001 td-Pluse Width (Sec.) Figure 3 - Pulse Waveform Peak Power (Single Pulse) 0 25 50 75 100 125 150 TL Lead Temperature (C) 175 Figure 4 - AC Line Protection Application 150 I IPPM - Peak Pulse Current, % RSM tr=10sec T J =2 5C Pulse Width(td) is defined as the point where the peak current decays to5 0% of IPPM Peak Value IPPM 10 0 Half Value IPPM IPPM ( 50 2 ) 10/1000sec. Waveform as defined by R.E.A Low Capacitance Application Note: Device must be used with two units in parallel, opposite in polarity as shown in circuit for AC signal line protection. td 0 1.0 0 2.0 3.0 4.0 t-Time (ms) Steady State Power Dissipation (W) Figure 5 - Steady State Power Dissipation Derating Curve 6.5 6 5.5 5 4.5 4 3.5 3 2.5 2 1.5 1 0.5 0 0 25 50 75 100 125 150 175 200 TL-Lead Temperature (C) 3 Rev 7