CD43__60B POW-R-BLOKTM Dual SCR Isolated Module 60 Amperes / Up to 1800 Volts Powerex, Inc., Hillis Street, Youngwood, Pennsylvania 15697 (724) 925-7272 Description: Powerex Dual SCR Modules are designed for use in applications requiring phase control and isolated packaging. The modules are isolated for easy mounting with other components on a common heatsink. TM POW-R-BLOK has been tested and recognized by the Underwriters Laboratories. OUTLINE DRAWING A C F G H 3 B 45 67 2 1 T J K "U" THREAD "S" FASTON TAB L D M N 6 7 1 ~ + 2 - Features: Q P Electrically Isolated Heatsinking DBC Alumina (Al2O3) Insulator Copper Baseplate Low Thermal Impedance for Improved Current Capability UL Recognized (E78240) CD43__60B Dual SCR Isolated POW-R-BLOKTM Module 60 Amperes / Up to 1800 Volts 3 5 4 Benefits: CONNECTION DIAGRAM Ordering Information: CD43 Outline Dimensions Dimension Inches Millimeters A 3.66 93 B 0.79 20 C 3.15 80 D 1.18 30 F 0.61 15.5 G 0.79 20 H 0.79 20 J 0.16 4 K 0.22 5.7 L 0.59 15 M 1.10 28 N 0.31 8 P 0.94 24 Q 1.16 29.4 S 0.11 x .03 2.8 x 0.8 T 0.25 6.4 U M5 M5 Select the complete nine digit module part number from the table below. Example: CD431660B is a 1600Volt, 60 Ampere Dual SCR Isolated POW-R-BLOKTM Module Type CD43 Voltage Current Volts Amperes (x100) 08 12 14 16 18 60 Version No Additional Insulation Components Required Easy Installation No Clamping Components Required Reduce Engineering Time Applications: Bridge Circuits AC & DC Motor Drives Battery Supplies Power Supplies Large IGBT Circuit Front Ends Lighting Control Heat & Temperature Control Welders B Note: Dimensions are for reference only. Revision Date: 04/28/2009 http://store.iiic.cc/ CD43__60B Powerex, Inc., Hillis Street, Youngwood, Pennsylvania 15697 (724) 925-7272 POW-R-BLOKTM Dual SCR Isolated Module 60 Amperes / Up to 1800 Volts Absolute Maximum Ratings Characteristics Conditions Symbol Units Repetitive Peak Forward and Reverse Blocking Voltage VDRM & VRRM up to 1800 V Non-Repetitive Peak Reverse Blocking Voltage (t < 5 msec) VRSM VRRM + 100 V 180 Conduction, TC=85C IT(RMS) 110 A RMS Forward Current Average Forward Current Peak One Cycle Surge Current, Non-Repetitive 2 I t for Fusing for One Cycle, 8.3 milliseconds 180 Conduction, TC=85C IT(AV) 70 A 60 Hz, 100% VRRM reapplied, Tj=125C ITSM 1,470 A 60 Hz, No VRRM reapplied, Tj=125C ITSM 1,740 A 60 Hz, No VRRM reapplied, Tj=25C ITSM 1,940 A 50 Hz, 100% VRRM reapplied, Tj=125C ITSM 1,400 A 50 Hz, No VRRM reapplied, Tj=125C ITSM 1,665 A 50 Hz, No VRRM reapplied, Tj=25C ITSM 1,850 A 8.3 ms, 100% VRRM reapplied, Tj=125C It 2 It 2 8,960 12,560 A sec 2 A sec It 2 15,600 A sec 2 It 9,800 A sec 2 It 13,860 A sec 2 It 17,110 A sec di/dt 150 A/s 8.3 ms, No VRRM reapplied, Tj=125C 8.3 ms, No VRRM reapplied, Tj=25C 10 ms, 100% VRRM reapplied, Tj=125C 10 ms, No VRRM reapplied, Tj=125C 10 ms, No VRRM reapplied, Tj=25C Maximum Rate-of-Rise of On-State Current, (Non-Repetitive) Operating Temperature Tj=125C Storage Temperature 2 2 2 TJ -40 to +125 C -40 to +125 C 25 3 44 5 95 in.-Lb. Nm in.-Lb. Nm g 3.35 oz. 3000 3500 V V Module Weight, Typical 50 - 60 Hz, 1 minute 50 - 60 Hz, 1 second 2 Tstg Max. Mounting Torque, M5 Mounting Screw on Terminals Max. Mounting Torque, Module to Heatsink V Isolation @ 25C Circuit to base, all terminals shorted together 2 Vrms Vrms Information presented is based upon manufacturers testing and projected capabilities. This information is subject to change without notice. The manufacturer makes no claim as to the suitability of use, reliability, capability, or future availability of this product. Revision Date: 04/28/2009 http://store.iiic.cc/ CD43__60B POW-R-BLOKTM Dual SCR Isolated Module 60 Amperes / Up to 1800 Volts Powerex, Inc., Hillis Street, Youngwood, Pennsylvania 15697 (724) 925-7272 Electrical Characteristics, TJ=25C unless otherwise specified Characteristics Symbol Test Conditions Repetitive Peak Forward Leakage Current IDRM Up to 1800V, TJ=125C 20 mA Repetitive Peak Reverse Leakage Current IRRM Up to 1800V, TJ=125C 20 mA V TM / VFM ITM / IFM =300A 1.9 V Threshold Voltage, Low-level Slope Resistance, Low-level V(TO)1 rT1 TJ = 125C, I = 16.7% x IT(AV) to IT(AV) 0.9 3.5 V m Minimum dV/dt dV/dt Tj=125C, Up to 800V Tj=125C, 1200V - 800V Peak On-State Voltage Turn-Off Time (Typical) t off Min. Max. Units 500 V/s 1000 V/s 40 - 100 (Typical) s Gate Trigger Current IGT TJ = 25C, IT= 2A Vr = 50V, -dI/dt=10 A/s Re-Applied dV/dt = 200 V/s, Linear to 900 V Tj= 25C, VD=6V, Resistive Load 150 mA Gate Trigger Voltage VGT Tj= 25C, VD=6V, Resistive Load 3.0 Volts Non-Triggering Gate Voltage VGDM Tj=125C, VD=VDRM 0.25 Volts Non-Triggering Gate Current IGDM Tj=125C, VD=VDRM 6 mA Holding Current IH Tj= 25C 150 mA Latching Current IL Tj= 25C 300 mA Thermal Characteristics Characteristics Symbol Max. Units Thermal Resistance, Junction to Case DC Operation RJ-C Per Module, both conducting Per Junction, both conducting 0.18 0.35 C/W C/W Thermal Resistance, Case to Sink Lubricated RC-S Per Module 0.1 C/W Revision Date: 04/28/2009 http://store.iiic.cc/ CD43__60B POW-R-BLOKTM Dual SCR Isolated Module 60 Amperes / Up to 1800 Volts Powerex, Inc., Hillis Street, Youngwood, Pennsylvania 15697 (724) 925-7272 Maximum On-State Forward Voltage Drop Maximum Transient Thermal Impedance (Junction to Case) ( Tj = 125 C ) 0.40 5 Thermal Impedance - Rjc - C/W On-State Voltage - Vtm - Volts 0.35 4 3 2 1 0.30 0.25 0.20 0.15 0.10 0.05 0 10 100 0.00 0.001 1000 0.01 0.1 Instantaneous On-State Current - Itm - Amperes Maximum On-State Power Dissipation 10 100 Maximum Allowable Case Temperature (Sinusoidal Waveform) (Sinusoidal Waveform) 120 125 180 120 100 Max. Case Temperature - Tcase - C Maximum Power Dissipation Per SCR - Watts 1 Time - t - Seconds 90 60 80 15 60 30 40 180 0 20 360 CONDUCTION ANGLE 120 115 180 0 110 105 15 100 30 95 60 90 90 0 10 20 30 40 50 60 70 0 80 180 120 85 0 360 CONDUCTION ANGLE 10 20 Average On-State Current - It(av) - Amperes 30 40 50 60 70 80 Average On-State Current - It(av) - Amperes Maximum Allowable Case Temperature Maximum On-State Power Dissipation (Rectangular Waveform) (Rectangular Waveform) 140 270 120 360 180 120 100 60 80 15 90 120 30 60 40 180 0 20 360 Max. Case Temperature - Tcase - C Maximum Power Dissipation Per SCR - Watts 160 110 180 0 360 CONDUCTION ANGLE 100 90 30 80 60 90 15 120 180 CONDUCTION ANGLE 270 70 0 0 20 40 60 80 100 120 0 20 40 60 80 100 360 120 Average On-State Current - It(av) - Amperes Average On-State Current - It(av) - Amperes Revision Date: 04/28/2009 http://store.iiic.cc/