Dimensions in Inches (mm)
Hubbell Wiring Device-Kellems • Hubbell Incorporated (Delaware) • 40 Waterview Drive • Shelton, CT 06484
Phone (800) 288-6000 • Fax (800) 255-1031Specifications subject to change without notice.
H-MOSS® Controls
Passive Infrared
Wall Switches
Features
Designed for use on 120 or 277V AC circuits, no neutral required,
fast retrofits. Built in photocell prevents lights from turning ON with
sufficient natural light.
3-Way capable
Matching wallplate included
Ordering Information
Description UPC Number Catalog Number
Manual adjusting;
dual-voltage 120/277V;
manual/auto ON
operation
783585256306 WS2000I
Listings
cULus listed to UL 773A
Specifications
Housing Flame retardant UL 94 V-0 ABS
Lens Polyethylene
Dimensions Face 2.59"H x 1.30"W, 0.61"D (from wall out)
Mounting Height 42 to 54 inches above floor
Mounting Strap Steel
Performance
Controls
Ambient Light Photocell, 10 to 500 foot candles
Service Switch OFF (service); vacancy (manual-ON); occupancy
(auto-ON)
Time Delay Manual 20 seconds to 30 minutes
Electrical
Load Capacity Incandescent - 0 to 1000 watts, 120V; Ballast - 0 to 1000
watts, 277V; Horsepower rating 1/6
Environmental
Operating Temperature 32°F to 122°F (0°C to 50°C) with rate of change not
exceeding 20°F(11°C) per hour
Storage -40°F to 150°F (-40°C to 65°C); 20% to 90% non
condensing relative humidity
Sensing Indicators
Passive Infrared Red LED
Complementary Products
SS Wallplate SS26
Snap-On Wallplate RCW1I
Online Resources
Customer Use Drawing
eCatalog
Installation Instructions