UG(F,B)15HT & UG(F,B)15JT Vishay General Semiconductor High Voltage Ultrafast Rectifier TO-220AC FEATURES * Glass passivated chip junction ITO-220AC * Ultrafast recovery times * Soft recovery charateristics * Low switching losses, high efficiency 1 1 UG15xT * High forward surge capability 2 2 * Meets MSL level 1, per J-STD-020, LF maximum peak of 245 C (for TO-263AB package) UGF15xT PIN 1 PIN 1 * Solder dip 260 C, 40 s (for TO-220AC and ITO-220AC package) CASE PIN 2 PIN 2 TO-263AB * Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC K 2 TYPICAL APPLICATIONS For use in high voltage, high frequency power factor correctors, switching mode power supplies, freewheeling diodes and secondary dc-to-dc rectification application. 1 UGB15xT K PIN 1 PIN 2 HEATSINK MECHANICAL DATA Case: TO-220AC, ITO-220AC, TO-263AB Epoxy meets UL 94V-0 flammability rating Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD22-B102 E3 suffix for consumer grade, meets JESD 201 class 1A whisker test, HE3 suffix for high reliability grade (AEC-Q101 qualified), meets JESD 201 class 2 whisker test Polarity: As marked Mounting Torque: 10 in-lbs maximum PRIMARY CHARACTERISTICS IF(AV) 15 A VRRM 500 V, 600 V IFSM 135 A trr 35 ns VF 1.5 V TJ max. 150 C MAXIMUM RATINGS (TC = 25 C unless otherwise noted) PARAMETER SYMBOL UG15HT UG15JT UNIT Maximum repetitive peak reverse voltage VRRM 500 600 V Maximum working reverse voltage VRWM 400 480 V Maximum RMS voltage VRMS 350 420 V Maximum DC blocking voltage VDC 500 Maximum average forward rectified current (Fig. 1) IF(AV) 15 A Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load IFSM 135 A TJ, TSTG - 55 to + 150 C VAC 1500 V Operating junction and storage temperature range Isolation voltage (ITO-220AC only) from terminal to heatsink t = 1 min Document Number: 88828 Revision: 27-Aug-08 600 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com V www.vishay.com 881 UG(F,B)15HT & UG(F,B)15JT Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TC = 25 C unless otherwise noted) PARAMETER TEST CONDITIONS Maximum instantaneous forward voltage (1) IF = 15 A Maximum DC reverse current at VRWM SYMBOL UG15HT UG15JT UNIT TJ = 25 C TJ = 125 C VF 1.75 1.50 V TJ = 25 C TJ = 125 C IR 30 4.0 A mA Maximum reverse recovery time IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A trr 35 ns Maximum reverse recovery time IF = 1.0 A, dI/dt = 50 A/s, VR = 30 V, Irr = 0.1 IRM trr 50 ns Typical softness factor (tb/ta) IF = 15 A, dI/dt = 240 A/s, VR = 400 V, Irr = 0.1 IRM S 0.9 - Maximum reverse recovery current IF = 15 A, dI/dt = 120 A/s, VR = 400 V, TC = 125 C IRM 9.0 A Peak forward recovery time IF = 15 A, dI/dt = 120 A/s, VF = 1.1 x VF max. tfr 500 ns THERMAL CHARACTERISTICS (TC = 25 C unless otherwise noted) PARAMETER Typical thermal resistance from junction to case SYMBOL UG15 UGF15 UGB15 UNIT RJC 1.5 3.0 1.5 C/W Note: (1) Pulse test: 300 s pulse width, 1 % duty cycle ORDERING INFORMATION (Example) PACKAGE PREFERRED P/N UNIT WEIGHT (g) PACKAGE CODE BASE QUANTITY DELIVERY MODE TO-220AC UG15JT-E3/45 1.85 45 50/tube Tube ITO-220AC UGF15JT-E3/45 1.98 45 50/tube Tube TO-263AB UGB15JT-E3/45 1.35 45 50/tube Tube TO-263AB UGB15JT-E3/81 1.35 81 800/reel Tape and reel TO-220AC UG15JTHE3/45 (1) 1.85 45 50/tube Tube ITO-220AC UGF15JTHE3/45 (1) 1.98 45 50/tube Tube TO-263AB UGB15JTHE3/45 (1) 1.35 45 50/tube Tube TO-263AB UGB15JTHE3/81 (1) 1.35 81 800/reel Tape and reel Note: (1) Automotive grade AEC-Q101 qualified www.vishay.com 882 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com Document Number: 88828 Revision: 27-Aug-08 UG(F,B)15HT & UG(F,B)15JT Vishay General Semiconductor RATINGS AND CHARACTERISTICS CURVES (TA = 25 C unless otherwise noted) 10 000 16 Instantaneous Reverse Leakage Current (A) Average Forward Current (A) UG15JT, UGB15JT 14 12 10 8 UGF15JT 6 4 2 1000 TJ = 100 C 100 10 TJ = 25 C 1 0 25 50 75 100 125 150 175 0 20 40 60 80 100 Case Temperature (C) Percent of Rated Peak Reverse Voltage (%) Figure 1. Forward Current Derating Curve Figure 4. Typical Reverse Leakage Characteristics 160 1000 140 Junction Capacitance (pF) Peak Forward Surge Current (A) TJ = 125 C 120 100 80 60 40 100 10 20 0 1 10 1 0.1 100 1 10 100 Number of Cycles at 60 Hz Reverse Voltage (V) Figure 2. Maximum Non-Repetitive Peak Forward Surge Current Figure 5. Typical Junction Capacitance 10 450 TJ = 125 C 1 TJ = 100 C TJ = 25 C 0.1 0.01 0.1 Stored Charge/Recovery Time (nC/ns) Instantaneous Forward Current (A) 100 trr Qrr 400 350 300 15 A, 240 A/s, 400 V 250 200 15 A, 240 A/s, 400 V 150 15 A, 120 A/s, 400 V 100 1 A, 50 A/s, 30 V 50 0 0.5 0.9 1.3 1.7 2.1 25 50 75 100 125 Instantaneous Forward Voltage (V) Junction Temperature (C) Figure 3. Typical Instantaneous Forward Characteristics Figure 6. Reverse Switching Characteristics Document Number: 88828 Revision: 27-Aug-08 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com www.vishay.com 883 UG(F,B)15HT & UG(F,B)15JT Vishay General Semiconductor PACKAGE OUTLINE DIMENSIONS in inches (millimeters) ITO-220AC TO-220AC 0.404 (10.26) 0.384 (9.75) 0.415 (10.54) MAX. 0.370 (9.40) 0.360 (9.14) 0.154 (3.91) DIA. 0.148 (3.74) DIA. 0.113 (2.87) 0.103 (2.62) 0.145 (3.68) 0.135 (3.43) 1 PIN 2 0.560 (14.22) 0.530 (13.46) 0.110 (2.79) 0.100 (2.54) 0.057 (1.45) 0.045 (1.14) 0.035 (0.89) 0.025 (0.64) 0.025 (0.64) 0.015 (0.38) 0.022 (0.56) 0.014 (0.36) 0.205 (5.20) 0.195 (4.95) 7 REF. 0.191 (4.85) 0.171 (4.35) CASE 0.037 (0.94) 0.027 (0.68) 7 REF. 2 1 0.560 (14.22) 0.530 (13.46) PIN 1 0.135 (3.43) DIA. 0.122 (3.08) DIA. 0.350 (8.89) 0.330 (8.38) 0.110 (2.79) 0.100 (2.54) PIN 2 0.105 (2.67) 0.095 (2.41) 0.671 (17.04) 0.651 (16.54) PIN 1.148 (29.16) 1.118 (28.40) 0.160 (4.06) 0.140 (3.56) 0.057 (1.45) 0.045 (1.14) 0.140 (3.56) DIA. 0.125 (3.17) DIA. 0.600 (15.24) 0.580 (14.73) 0.603 (15.32) 0.573 (14.55) 0.350 (8.89) 0.330 (8.38) 7 REF. 0.076 (1.93) REF. 45 REF. 0.635 (16.13) 0.625 (15.87) 0.190 (4.83) 0.170 (4.32) 0.110 (2.79) 0.100 (2.54) 0.076 (1.93) REF. 0.185 (4.70) 0.175 (4.44) 0.055 (1.39) 0.045 (1.14) 0.028 (0.71) 0.020 (0.51) 0.205 (5.21) 0.195 (4.95) TO-263AB 0.411 (10.45) 0.380 (9.65) 0.190 (4.83) 0.160 (4.06) 0.245 (6.22) MIN. 0.055 (1.40) 0.045 (1.14) Mounting Pad Layout 0.42 (10.66) MIN. K 0.360 (9.14) 0.320 (8.13) 1 K 2 0.624 (15.85) 0.591 (15.00) 0 to 0.01 (0 to 0.254) 0.110 (2.79) 0.090 (2.29) 0.021 (0.53) 0.014 (0.36) 0.037 (0.940) 0.027 (0.686) 0.105 (2.67) 0.095 (2.41) www.vishay.com 884 0.055 (1.40) 0.047 (1.19) 0.205 (5.20) 0.195 (4.95) 0.140 (3.56) 0.110 (2.79) 0.33 (8.38) MIN. 0.670 (17.02) 0.591 (15.00) 0.15 (3.81) MIN. 0.08 (2.032) MIN. 0.105 (2.67) 0.095 (2.41) For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com Document Number: 88828 Revision: 27-Aug-08 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Revision: 12-Mar-12 1 Document Number: 91000