F-212 TM TCSD TMM .26" (6,6mm) (2,00mm) .0787" TCSD-08-D-02.00-01-N-R ******************* TCSD SERIES TM TIGER EYE IDC SOCKET CABLE Mates with: TMM, TMMH, STMM, MMT, TW, MTMM, EHT, ETMM (-SR), ZSTMM TYPE STRIP END OPTION NO. PINS PER ROW 01 LENGTH PLATING OPTION OTHER OPTION N SPECIFICATIONS -05, -08, -10, -12, -13, -15, -17, -20, -22, -25 For complete specifications see www.samtec.com?TCSD Insulator Material: Black Glass Filled Polyester Contact: BeCu Plating: Au or Sn over 50" (1,27m) Ni Wire: 28 AWG 7/36 Stranded, Tinned, Copper with Gray PVC Insulator Current Rating: 1A Operating Temp Range: -40C to +105C Lead Size Accepted: (0,48mm) .019" to (0,53mm) .021" Contact Resistance: 15 m maximum delta from initial Insertion Depth: (2,87mm) .113" to (3,17mm) .125" Insertion Force: (Single contact only) 2 oz. (0,56N) average Withdrawal Force: (Single contact only) 1.4 oz (0,39N) average RoHS Compliant: Yes -N -"XX.XX" = Notch Polarization = Assembled Length Assembled Length in INCHES (1/8") 2 inches minimum -F = Gold flash on contact (Call for other sizes) Leave blank for standard plating: 30"(0,76m) Gold on contact area -S -D = Single End = Double End -SR -P "XX" = Position Polarization No. of positions x (2,00) .0787 + (7,874) .3100 01 Specify "XX" as position number. Same position will be polarized on both ends. 1 = Socket Strip (1,02) .040 Not available with -O, -M, -R, -DXX or -BXX 02 TCSD (3,17) .125 -B "XX" 01 (4,00) .158 -D "XX" = Daisy Chain 2" min. = Breakout ALSO AVAILABLE = Strain Relief "XX" Double Row Connectors Specify "XX" as number of conductors to be broken out. No. of positions x (2,00) .0787 + (4,00) .157 (1,00) .039 1/8" 4" minimum Outer Most (End of assembly) 4 "XX" (5,08) .200 Cost effective IDC socket. See www.samtec.com?TLSD (2,00) .0787 (2,00) .0787 -R = Reversed 5"max. 2"min. Breakout starts with Number 1 lead indicated by brown wire or red stripe. Shown on top side. 5 POLARIZING KEY Specify PK-01-07 for polarizing key (Available in wheels of six each). Also polarizes SMM Series socket strips. Note: Other Gold plating options available. Contact Samtec. Note: TCSD Series assemblies are nonstandard, non-returnable. 2 EJECTOR HEADERS & LOCKING CLIPS -M -RW = Middle Reverse = Reverse Wiring See TMM Series. Requires -DXX * Ejector headers * Locking clips 5 -O 01 = Outside Reverse * Strain relief option 02 See EHT Series. Blue or black wire opposite position #1. 3 WWW.SAMTEC.COM Requires -DXX 5