SINGLE TURN CERMET TRIMMERS RoHS compliant FT-63 INTERNAL STRUCTURE 2 1 3 4 5 9 8 Part name FEATURES 1 Housing RoHS compliant Resistance tolerance 10 % "O" ring sealed (Washable: Refer to A-328) Suitable for automatic insertion and automatic adjustment Increase in the level of characteristics in the highfrequency field (In house comparison) 2 Rotor 3 Wiper 4 "O" ring 5 Resistive element 6 Terminal pin 7 Adhesive 8 Base element 9 Electrode 6 7 Material Flammability Polybutyleneterephthalate UL-94V-0 Nickel silver -- Silicone rubber UL-94HB RuO2 cermet Copper, Tin-plated -- Epoxy UL-94V-0 Ceramic -- Ag-Pd cermet PART NUMBER DESIGNATION FT-63 E T V 5k (502) Series name Resistance code Terminal pin Resistance value ESn (Lead-free) Product shape Form of packaging PTop adjustment VTop adjustment TTaping (Ammo pack type) BlankBulk in plastic bag Please refer to the LIST OF PART NUMBERS when placing orders. Specifications are subject to change without notice. SSide adjustment XSide adjustment HSide adjustment NSide adjustment COPAL ELECTRONICS FT-63 CERMET TRIMMERS LIST OF PART NUMBERS Form of packaging Adjustment position Taping (Ammo pack type) Plastic bag FT-63ETP FT-63EP FT-63ETV FT-63EV FT-63ETS FT-63ES FT-63ETH FT-63EH Top adjustment Side adjustment FT-63EX FT-63EN Nominal resistance values Fig. 1 A 10 A 20 50 100 200 300 500 1 k 2 k 3 k 5 k 10 k 20 k 30 k 50 k 100 k 200 k 300 k 500 k 1 M 2 M The above part numbers are all available with the respective combination of <Nominal resistance values> (Fig. 1). Verify the above part numbers when placing orders. Taping specification is not sold separately and must be purchased in taping unit. The products indicated by A mark are manufactured upon receipt of order basis. Not manufactured ELECTRICAL CHARACTERISTICS Nominal resistance range Resistance tolerance MECHANICAL CHARACTERISTICS 10 ~ 2 M Mechanical angle 260 (1 turn) 10 % Operating torque 20 mN*m {204 gf*cm} maximum Power ratings 0.5 W (70 C) 0 W (125 C) Stop strength 50 mN*m {510 gf*cm} minimum Resistance law Linear law Rotational life 100 cycles [R/R (2 +3 %)] Terminal strength 10 N {1.02 kgf} minimum Tensile strength Power ratings Thrust to rotor 10 N {1.02 kgf} minimum 220 (1 turn) Solderability Maximum input voltage DC200 V or power rating, whichever is smaller Maximum wiper current Effective electrical angle End resistance 1 % or 2 , whichever is greater C.R.V. 2 % or 3 , whichever is greater Operating temp. range Temp. coefficient Insulation resistance Dielectric strength Net weight 245 3 C, 2 ~ 3 s { }Reference only -55 ~ 125 C 10 ~ 20 : 150 10-6/C maximum 50 ~ 2 M : 100 10-6/C maximum 1000 M minimum (DC500 V) AC900 V, 60 s Approx. 0.52 g (FT-63EP, EV) Approx. 0.66 g (FT-63ES, EH, EX, EN) Specifications are subject to change without notice. Specifications in this catalog are for reference. The formal specification sheets will be submitted upon request. COPAL ELECTRONICS FT-63 CERMET TRIMMERS ENVIRONMENTAL CHARACTERISTICS Test item Test conditions Specifications -65 ~ 125 C (0.5 h), 5 cycles -10 ~ 65 C (80 ~ 98 %), 10 cycles, 240 h 981 m/s2, 6 ms 6 directions for 3 times each [R/R 1 %] [S.S. 1 %] Vibration Amplitude 1.52 mm or Acceleration 196 m/s2, 10 ~ 2000 Hz, 3 directions, 12 times each [R/R 1 %] [S.S. 1 %] Load life 70 C, 0.5 W 1000 h Low temp. operation -55 C, 2 h High temp. exposure 125 C, 250 h [R/R 3 %] [S.S. 1 %] [R/R 2 %] [S.S. 2 %] [R/R 3 %] [S.S. 2 %] Immersion seal 85 C, 60 s Thermal shock Humidity Shock [R/R 2 %] No leaks (No continuous bubbles) Flow soldering Soldering heat 260 3 C, 5 ~ 6 s, two times maximum Manual soldering 380 10 C, 3 ~ 4 s [R/R 1 %] MAXIMUM INPUT RATINGS Maximum input Maximum wiper Nominal resistance Resistance code voltage (V) values () current (mA) A A 10 20 50 100 200 300 500 100 200 500 101 201 301 501 2.24 3.16 5.00 7.07 10.0 12.2 15.8 223 158 100 70.7 50.0 40.8 31.6 1k 2k 3k 5k 10 k 20 k 30 k 50 k 102 202 302 502 103 203 303 503 22.4 31.6 38.7 50.0 70.7 100 122 158 22.4 15.8 12.9 10.0 7.07 5.00 4.08 3.16 100 k 200 k 300 k 500 k 1M 2M 104 204 304 504 105 205 200 200 200 200 200 200 2.00 1.00 0.66 0.40 0.20 0.10 The products indicated by A mark are manufactured upon receipt of order basis. R/RChange in total resistance S.S. Setting stability Specifications are subject to change without notice. Specifications in this catalog are for reference. The formal specification sheets will be submitted upon request. COPAL ELECTRONICS FT-63 CERMET TRIMMERS OUTLINE DIMENSIONS Unless otherwise specified, tolerance: 0.3 (Unit: mm) FT-63EP Top adjustment 1 3 CW rotation 260 Nom. Lead-free Identification mark 2 3 - 0.45 2 7 2.5 0.7W x 3L x 1.6D 3 7 1 2.5 72 5.8 2.5 Resistance code & Production date code FT-63ES Side adjustment Lead-free Identification mark 260 Nom. 0.7W x 3L x 1.6D Resistance code & Production date code +0.4 7 -0.2 Adjustment 8.2 1 3 4.6 2.5 2 3.5 7 +0.4 0 2.5 7.52 2.5 3 - 0.45 FT-63EX Side adjustment Resistance code & Production date code 7 +0.4 0 7 +0.4 -0.2 Adjustment 2.5 8.2 3.5 2 4.6 260 Nom. 0.7W x 3L x 1.6D 3 1 2.5 2.5 102 Lead-free Identification mark 3 - 0.45 Specifications are subject to change without notice. Specifications in this catalog are for reference. The formal specification sheets will be submitted upon request. COPAL ELECTRONICS FT-63 CERMET TRIMMERS OUTLINE DIMENSIONS Unless otherwise specified, tolerance: 0.3 (Unit: mm) FT-63EV Top adjustment 1 3 CW rotation Lead-free Identification mark 260 Nom. 1 2 7 0.7W x 3L x 1.6D 2 3 3 - 0.45 7 Resistance code & Production date code 13.5 2 16 2 5.8 2.5 2.5 FT-63EH Side adjustment 0.7W x 3L x 1.6D Lead-free Identification mark Resistance code & Production date code 260 Nom. 7 +0.4 -0.2 Adjustment 2 3 2.5 9.5 2 72 4.6 8.2 1 3.5 7 +0.4 0 2.5 3 - 0.45 FT-63EN Side adjustment 0.7W x 3L x 1.6D 7 +0.4 Resistance code & Production date code 260 Nom. 7 -0.2 Adjustment 2 4.6 2.5 8.2 3.5 Lead-free Identification mark +0.4 0 7.5 2 1 2.5 2.5 3 3 - 0.45 Terminals 1 & 3 position in N type is different from X type. Specifications are subject to change without notice. Specifications in this catalog are for reference. The formal specification sheets will be submitted upon request. COPAL ELECTRONICS FT-63 CERMET TRIMMERS OUTLINE DIMENSIONS Unless otherwise specified, tolerance: 0.3 (Unit: mm) 1 3 CW rotation 2 FT-63ETP Top adjustment 0.7W x 3L x 1.6D 260 Nom. Resistance code & Production date code Lead-free Identification mark 0.7W x 3L x 1.6D 260 Nom. 12.71 2 max. 7 12.71 2 max. 2 max. 7 2.5 12.70.3 5.8 0.5 max. 60.5 0.450.02 180.5 3 min. 161 3 0.9 40.2 12.70.3 0.450.02 FT-63ETS Side adjustment 3 2 max. 0.7W x 3L x 1.6D 180.5 +0.7 2.5 0.9 40.2 6.350.5 12.70.3 0.450.02 1 2.5 2.5 3 0.9 40.2 6.350.5 12.70.3 2 max. 4.6 8.2 60.5 3.5 9 -0.5 0.5 max. 3 min. 161 180.5 2.5 7 260 Nom. Resistance code & Production date code 27.21 8.2 60.5 Lead-free Identification mark 2 max. 3.5 +0.7 9 -0.5 0.5 max. 190.75 3 min. Resistance code & Production date code +0.4 0 30.5 2 max. 0.7W x 3L x 1.6D 190.75 7 +0.4 0 260 Nom. 7 +0.4 -0.2 12.71 7 +0.4 -0.2 4.6 Lead-free Identification mark 2.5 2.5 6.350.5 12.71 27.21 2.5 1 FT-63ETH Side adjustment 1 2 max. 2.5 +0.7 9 -0.5 0.9 3 40.2 6.350.5 190.75 24.81 9 +0.7 -0.5 2.5 1 180.5 0.5 max. 60.5 3 min. 190.75 24.81 5.8 7 Resistance code & Production date code Lead-free Identification mark 7 30.5 FT-63ETV Top adjustment 0.450.02 Specifications are subject to change without notice. Specifications in this catalog are for reference. The formal specification sheets will be submitted upon request. COPAL ELECTRONICS FT-63 CERMET TRIMMERS PACKAGING SPECIFICATIONS <Taping packaging specifications> Taping version is packaged in 1000 pcs. per reel. Orders will be accepted for units of 1000 pcs., i.e., 1000, 2000, 3000 pcs., etc. Tape & reel version contains 1000 pcs. in one box. <Bulk pack specifications> Unit of bulk pack in a plastic bag is 100 pcs. per pack. Boxing of bulk in a plastic bag is performed with 1000 pcs. per box. Direction of feed 45 #1 terminal 1 3 Direction of feed 33 0 0 33 #3 terminal Ammo pack type Ammo Pack Package size: 330 mm x 330 mm x 45 mm The leader and end of the tape have an empty part of minimum 300 mm respectively. There are two tape outlets on the package for different terminal alignment directions, for which details refer to the sketch above. (e.g.) When the tape is fed from the right outlet marked 3, #3 terminal comes out first. Gross weight of the boxing version ETV : Approx. 850 g ETH : Approx. 940 g ETP : Approx. 820 g ETS : Approx. 940 g Specifications are subject to change without notice. Specifications in this catalog are for reference. The formal specification sheets will be submitted upon request.