InterfaceConnectors
IEEE1394 4PConnectors
■ Features
1. Most suitable for multimedia operations such as MPEG
system image transfer through the isochronous transfer
mode.
2. Use-friendly with a fine and flexible cable measuring only
φ4mm with 4 signal wires.
3. Smaller than a 6P IEEE 1394 connector yet sufficiently
strong enough to help design smaller equipment.
■ Specification
1. Rating : 0.5A, 5V DC
2. Contact Resistance : 30mΩmax.
3. Insulation Resistance : 100MΩmin. at 100V DC
4. Withstanding Voltage : 100V AC (for one minute)
5. Operating Life : 3,000 cycles
■ Material and Plating
●Socket
Housing : Thermoplastic Resin, Black, 94V-0
Terminal : Cu Alloy, Selective Au Plating or Au Plating
Shield Case : Cu Alloy, Sn Cu Plating or Ni Plating
●Plug
Housing : Thermoplastic Resin, Black, 94V-0
Contact : Cu Alloy, Au Plating
Cover : Thermoplastic Resin, Black, 94V-0
■ Outline
A connector applicable for the IEEE 1394 standards for a
serial bus and interface. Peripherals of audio-visual
equipment and personal computers which are increasingly
digitalized can be connected through the same interface
meeting IEEE 1394 requirements.
■ 概 要
シリアル・バス・インタフェース規格であるIEEE1394の通信
フォーマットに対応した4Pコネクタです。デジタル化が進
むAV機器やパソコンの周辺機器をIEEE1394という同一イン
タフェースで接続可能です。
■ 特 長
1. Isochronous転送モードによりMPEG方式の画像転送など
マルチメディア用途に最適です。
2. 信号線は4本のみであり、ケーブルはφ4と細くフレキシブ
ルなため、ユーザーフレンドリーに仕上ってます。
3. 機器の小型化に貢献すべく、IEEE1394の6Pタイプより
小型ですが十分な強度を確保しています。
■ 仕 様
1. 定格電圧電流:DC 5V 0.5A
2. 接触抵抗:30mΩ以下
3. 絶縁抵抗:DC 100V 100MΩ以上
4. 耐 電 圧:AC 100V(1分間)
5. 挿抜寿命:3,000回
■ 材質・表面処理
●ソケット
ハウジング:熱可塑性樹脂 黒色 94V-0
ターミナル:銅合金 部分金めっき 又は金めっき
シールドケース:銅合金 すず銅めっき 又はニッケルめっき
●プラグ
ハウジング:熱可塑性樹脂 黒色 94V-0
コンタクト:銅合金 金めっき
カ バ ー:熱可塑性樹脂 黒色 94V-0