Dual Surface Mount Low Leakage Diode Features: * * * Medium Speed Current Applications Very Low Leakage Current Surface Mount Package Ideally Suited for Automatic Insertion Applications: Small signal switching Max. Rating @ Ta = 25C unless otherwise specified Parameter Symbol Limits Unit Vrrm Vrms Vr 85 V Vr(rms) 60 V Repetitive peak reverse voltage Working peak reverse voltage DC reverse voltage RMS reverse voltage Peak forward surge current @t= 1.0s @t=1.0ms @t=1.0s Ifsm Forward continuous current Single diode Double diode Ifm 160 140 mA Repetitive peak forward current Ifrm 500 mA Pd 250 mW Thermal resistance junction to ambient air Rja 500 C/W Operating and storage temperature range Tj, Tstg -65 to +150 C Power dissipation 4 1 0.5 A Electrical Characteristics @ Ta = 25C unless otherwise specified Parameter Reverse breakdown voltage Symbol V(br) Conditions Ir = 100A Min. Max. Unit 85 - V - 5 80 nA mV Ir Vr = 75V Vr = 75V, Tj = 150C Forward voltage Vf If = 1mA If = 10mA If = 50mA If = 150mA - 900 1,000 1,100 1,250 Junction capacitance Cj Vr = 0V, f = 1MHz - 5 ns trr If = Ir = 10mA, Irr = 0.1 x Ir, Rl = 100 - 3 pF Reverse voltage leakage current Reverse recovery time www.element14.com www.farnell.com www.newark.com Page <1> 25/02/13 V1.0 Dual Surface Mount Low Leakage Diode Typical Characteristics @ Ta = 25C unless otherwise specified Plastic surface mounted package www.element14.com www.farnell.com www.newark.com Page <2> 25/02/13 V1.0 Dual Surface Mount Low Leakage Diode Soldering Footprint Package Information Device Package Shipping BAV199-7-F SOT-23 3,000 / Tape & Reel Part Number Table Description Part Number Dual surface mount low leakage diode BAV199-7-F Important Notice : This data sheet and its contents (the "Information") belong to the members of the Premier Farnell group of companies (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. Multicomp is the registered trademark of the Group. (c) Premier Farnell plc 2012. www.element14.com www.farnell.com www.newark.com Page <3> 25/02/13 V1.0