Multi CERAMOS Enhanced optical Power LED (ThinFilm / ThinGaN) Lead (Pb) Free Product - RoHS Compliant LRTB C9TP Vorlaufige Daten / Preliminary Data Besondere Merkmale Features * Gehausetyp: Keramik Gehause fur RGB-Anzeigen mit diffusem Silikon Verguss. * Besonderheit des Bauteils: additive Farbmischung durch unabhangige Ansteuerung aller Chips; Kontrasterhohung durch schwarze Oberflache (RGB-Displays) * Wellenlange: 625 nm (rot), 528 nm (true green), 470 nm (blau) * Abstrahlwinkel: Lambertscher Strahler (120) * Technologie: ThinFilm (rot), ThinGaN (true green, blau) * optischer Wirkungsgrad: 45 lm/W (rot), 45 lm/W (true green), 15 lm/W (blau) * Gruppierungsparameter: Lichtstarke, Wellenlange * Verarbeitungsmethode: fur alle SMT-Bestucktechniken geeignet * Lotmethode: Reflow Loten * Vorbehandlung: nach JEDEC Level 2 * Gurtung: 12 mm Gurt mit 1000/Rolle, o180 mm * ESD-Festigkeit: ESD-sensitives Bauteil * package: ceramic package for RGB-Displays with diffused silicon resin. * feature of the device: additive mixture of color stimuli by independent driving of each chip; higher contrast by a black surface (RGB-Displays) * wavelength: 625 nm (red), 528 nm (true green), 470 nm (blue) * viewing angle: Lambertian Emitter (120) * technology: ThinFilm (red), ThinGaN (true green, blue) * optical efficiency: 45 lm/W (red), 45 lm/W (true green), 15 lm/W (blue) * grouping parameter: luminous intensity, wavelength * assembly methods: suitable for all SMT assembly methods * soldering methods: reflow soldering * preconditioning: acc. to JEDEC Level 2 * taping: 12 mm tape with 1000/reel, o180 mm * ESD-withstand voltage: ESD senitive Device Anwendungen * Anzeigen im Innen- und Auenbereich (z.B. im Verkehrsbereich; Laufschriftanzeigen) * Getrennte Anteuerung der Leuchtdiodenchips zur Darstellung verschiedener Farben inclusive wei * Vollfarbdisplays bzw. RGB-Displays * Hinterleuchtung (LCD, Schalter, Tasten, Werbebeleuchtung, Allgemeinbeleuchtung) * Einkopplung in Lichtleiter Applications * indoor and outdoor displays (e.g. displays for traffic; light writing displays) * LED chips can be controlled seperately to display various colors including white * full color displays, RGB-Displays * backlighting (LCD, switches, keys, illuminated advertising, general lighting) * coupling into light guides 2009-10-14 1 LRTB C9TP Bestellinformation Ordering Information Typ Emissionsfarbe Lichtstarke1) Seite 26 Type Color of Emission Luminous Intensity1) page 26 IF = 140 mA IV (mcd) LRTB C9TP red true green blue red true green blue 2.800...8.000 5.000 ...14.000 1.400 ...4.000 Bestellinformation Ordering Information Typ Type Bestellnummer Ordering Code LRTB C9TP-CWD5-1+D5E7-25+A7B9-47 Q65110A9468 Anm.: Die oben genannten Typbezeichnungen umfassen die bestellbaren Selektionen. Diese bestehen aus wenigen Helligkeitsgruppen (siehe Seite 7 fur nahere Informationen). Es wird nur eine einzige Helligkeitsgruppe pro Gurt geliefert. Z.B.: LRTB C9TP-CWD5-1+D5E7-25+A7B9-47 bedeutet, dass auf dem Gurt nur eine der Helligkeitsgruppen CW, C5, C7, C9, DW oder D5 enthalten ist. Um die Liefersicherheit zu gewahrleisten, konnen einzelne Helligkeitsgruppen nicht bestellt werden. Gleiches gilt fur die Farben, bei denen Wellenlangengruppen gemessen und gruppiert werden. Pro Gurt wird nur eine Wellenlangengruppe geliefert. Z.B.: LRTB C9TP-CWD5-1+D5E7-25+A7B9-47 bedeutet, dass auf dem Gurt nur eine der Wellenlangengruppen -2, -3, -4 oder -5 enthalten ist (siehe Seite 8 fur nahere Information). Z.B.:LRTB C9TP-CWD5-1+D5E7-25+A7B9-47 bedeutet, dass das Bauteil innerhalb der auf Seite 4 spezifizierten Grenzen geliefert wird. Um die Liefersicherheit zu gewahrleisten, konnen einzelne Wellenlangengruppen nicht bestellt werden. Note: The above Type Numbers represent the order groups which include only a few brightness groups (see page 7 for explanation). Only one group will be shipped on each reel (there will be no mixing of two groups on each reel). E.g. LRTB C9TP-CWD5-1+D5E7-25+A7B9-47 means that only one group CW, C5, C7, C9, DW or D5 will be shippable for any one reel. In order to ensure availability, single brightness groups will not be orderable. In a similar manner for colors where wavelength groups are measured and binned, single wavelength groups will be shipped on any one reel. E.g. LRTB C9TP-CWD5-1+D5E7-25+A7B9-47 means that only 1 wavelength group -2, -3, -4 or -5 will be shippable (see page 8 for explanation). E.g. LRTB C9TP-CWD5-1+D5E7-25+A7B9-47 means that the device will be shiped within the specified limits as stated on page 4. In order to ensure availability, single wavelength groups will not be orderable. 2009-10-14 2 LRTB C9TP Grenzwerte Maximum Ratings Bezeichnung Parameter Symbol Symbol Werte Values red Einheit Unit true green blue Betriebstemperatur (auf PC-Board FR4/G30) Operating temperature range (on PC-Board FR4/G30) Top - 40 ... + 110* C Lagertemperatur Storage temperature range Tstg - 40 ... + 110 C Sperrschichttemperatur Junction temperature Tj + 150 C 30 250 mA Durchlassstrom Forward current (TS=25C) (min.) IF (max.) IF Stostrom Surge current tp = 10 s, D = 0.005, TS=25C IFM 1000 Sperrspannung2) Seite 26 Reverse voltage2) page 26 (TS=25C) VR 12 750 750 5 mA V *auf Grund von unterschiedlichen thermischen Ausdehnungskoeffizienten nicht empfehlenswert fur MCPCB on MCPCB not recommended due to thermal mismatch issue 2009-10-14 3 LRTB C9TP Kennwerte Characteristics (TS = 25 C) Bezeichnung Parameter Wellenlange des emittierten Lichtes Wavelength at peak emission IF = 140 mA Dominantwellenlange3) Seite 26 Dominant wavelength3) page 26 IF = 140 mA Symbol Symbol Werte Values Einheit Unit red true green blue (typ.) peak 632 523 465 nm (min.) (typ.) (max.) dom 619 625 631 518 528* 544 459 466* 471 nm nm nm Spektrale Bandbreite bei 50 % Irel max Spectral bandwidth at 50 % Irel max IF = 140 mA (typ.) 18 33 25 nm Abstrahlwinkel bei 50 % IV (Vollwinkel) Viewing angle at 50 % IV (typ.) 2 120 120 120 Grad deg. Durchlassspannung4) Seite 26 Forward voltage4) page 26 IF = 140 mA (min.) (typ.) (max.) VF VF VF 1.9 2.1 2.65 2.9 3.4 4.1 2.9 3.3 4.1 V V V Sperrstrom Reverse current VR = 5 V (blue / true green); 12 V (red) (typ.) (max.) IR IR 0.01 10 0.01 10 0.01 10 A A Warmewiderstand Thermal resistance Sperrschicht/Lotpad 1 chip on Junction/solder point 1 chip on (typ.) (max.) Rth JS Rth JS 41 55 K/W K/W Sperrschicht/Lotpad 3 chip on Junction/solder point 3 chip on (typ.) (max.) Rth JS Rth JS 50 82 K/W K/W * Einzelgruppen siehe Seite 8 Individual groups on page 8 **Rth(max) basiert auf statistischen Werten Rth(max) is based on statistic values 2009-10-14 4 LRTB C9TP Farbortgruppen5) Seite 26 5) page 26 Chromaticity Coordinate Groups 7 OHA04233 0.9 520 530 0.8 540 510 550 0.7 505 2 3 4 5 true green 0.6 560 570 500 0.5 580 590 600 610 620 1 630 red 495 0.4 490 0.3 485 0.2 480 7 0.1 0 2009-10-14 6 blue 5 4 0 460 0.1 0.2 0.3 0.4 5 0.5 0.6 0.7 0.8 0.9 LRTB C9TP Gruppe Group 2 3 4 5 1 Anm.: Note: Cx Cy Gruppe Group Cx Cy 0.109 0.739 4 0.146 0.029 0.148 0.670 0.157 0.047 0.178 0.694 0.152 0.058 0.148 0.763 0.139 0.038 0.139 0.757 0.142 0.034 0.171 0.688 0.155 0.053 0.206 0.695 0.149 0.065 0.184 0.757 0.135 0.044 0.173 0.759 0.138 0.039 0.198 0.692 0.151 0.059 0.238 0.682 0.145 0.075 0.221 0.743 0.129 0.053 0.209 0.748 0.134 0.046 0.228 0.685 0.149 0.067 0.271 0.665 0.141 0.087 0.260 0.723 0.123 0.065 0.689 0.310 0.677 0.311 0.696 0.292 0.709 0.291 5 6 7 Die Farbkoordinaten des Mischlichtes konnen innerhalb des gekennzeichneten Bereichs des Farbdreiecks erwartet werden. The color coordinates of the mixed light can be expected within the marked area of the color triangle 2009-10-14 6 LRTB C9TP Floating Bins red CW = 2.800... 4.500 [mcd] C5 = 3.153 ... 5.000 mcd] C7 = 3.550... 5.600 [mcd] C9 = 4.000... 6.300 [mcd] DW = 4.500.. 7.100 [mcd] D5 = 5.000... 8.000 [mcd] Floating Bins true green D5 = 5.020... 7.994 [mcd] D7 = 5.600 ... 9.000 [mcd] D9 = 6.300 ... 10.000 [mcd] EW = 7.100 ... 11.200 [mcd] E5 = 8.000 ... 12.000 [mcd] E7 = 9.000 ... 14.000 [mcd] Floating Bins blue A7 = 1.400... 2.240 [mcd] A9 = 1.590... 2.500 [mcd] BW = 1.800... 2.800 [mcd] B5 = 2.010... 3.150 [mcd] B7 = 2.440... 3.550 [mcd] B9 = 2.500... 4.000 [mcd] 2009-10-14 7 LRTB C9TP Wellenlangengruppen (Dominantwellenlange)3) Seite 26 Wavelength Groups (Dominant Wavelength)3) page 26 Gruppe Group true green Einheit Unit Gruppe Group 526 nm 532 nm 530 538 536 544 min. max. 2 518 3 524 4 5 blue Einheit Unit min. max. 4 459.0 463.5 nm 5 461.5 466.0 nm nm 6 464.0 468.5 nm nm 7 466.5 471.0 nm Gruppenbezeichnung auf Etikett Group Name on Label Beispiel: CW-1+DW-2+A7-3 Example: CW-1+DW-2+A7-3 Helligkeitsgruppe Helligkeitsgruppe Wellenlange Helligkeitsgruppe Wellenlange Brightness Group Wellenlange (keine Gruppierung) Wavelength (no grouping) Brightness Group Wavelength Brightness Group Wavelength (red) (red) (true green) (true green) (blue) (blue) 1 D5 2 A7 4 CW Anm.: In einer Verpackungseinheit / Gurt ist immer nur eine Helligkeitsgruppe pro Farbe enthalten. Note: No packing unit / tape ever contains more than one brightness group per color. 2009-10-14 8 LRTB C9TP Relative spektrale Emission5) Seite 26 Relative Spectral Emission5) page 26 V() = spektrale Augenempfindlichkeit / Standard eye response curve Irel = f (); TS = 25 C; IF = 140 mA OHL02514 100 % I rel 80 V 60 red blue true green 40 20 0 400 450 500 550 600 650 nm 700 Abstrahlcharakteristik5) Seite 26 Radiation Characteristic5) page 26 Irel = f (); TS = 25 C 40 30 20 10 0 50 OHL01660 1.0 0.8 0.6 60 0.4 70 0.2 80 0 90 100 1.0 2009-10-14 0.8 0.6 0.4 0 20 9 40 60 80 100 120 LRTB C9TP Durchlassstrom6) Seite 26 Forward Current6) page 26 IF = f (VF); TS = 25 C, red solid line: specified DC-range IF Durchlassstrom6) Seite 26 Forward Current6) page 26 IF = f (VF); TS = 25 C, true green solid line: specified DC-range OHL04234 250 mA IF 200 200 150 150 100 100 50 50 0 1.7 1.8 1.9 0 2 2.1 2.2 V 2.4 Durchlassstrom6) Seite 26 Forward Current6) page 26 IF = f (VF); TS = 25 C, blue solid line: specified DC-range IF OHL04236 200 150 100 50 0 2.7 2.9 3.1 3.3 V 3.5 VF 2009-10-14 2.7 2.9 3.1 3.3 3.5 V 3.7 VF VF 250 mA OHL04235 250 mA 10 LRTB C9TP Relative Lichtstarke6)7) Seite 26 Relative Luminous Intensity6) 7) page 26 V/V(140 mA) = f (IF); TS = 25 C; red 1.9 Relative Lichtstarke6)7) Seite 26 Relative Luminous Intensity6) 7) page 26 IV/IV(140 mA) = f (IF); TS = 25 C; true green OHL04237 1.6 IV I V (140 mA) OHL04238 IV I V (140 mA) 1.5 1.2 1.3 1.0 1.1 0.8 0.9 0.6 0.7 0.5 0.4 0.3 0.2 0.1 0 30 60 90 120 150 180 210 mA 270 IF IF Relative Lichtstarke6)7) Seite 26 Relative Luminous Intensity6) 7) page 26 V/V(140 mA) = f (IF); TS = 25 C; blue 1.6 OHL04239 IV I V (140 mA) 1.2 1.0 0.8 0.6 0.4 0.2 0 30 60 90 120 150 180 210 mA 270 IF 2009-10-14 30 60 90 120 150 180 210 mA 270 11 LRTB C9TP Relative Vorwartsspannung6) Seite 26 Relative Forward Voltage6) page 26 VF = VF - VF(25 C); IF = 140 mA, red OHL04242 0.5 VF Relative Vorwartsspannung6) Seite 26 Relative Forward Voltage6) page 26 VF = VF - VF(25 C); IF = 140 mA, true green V VF V 0.3 0.3 0.2 0.2 0.1 0.1 0 0 -0.1 -0.1 -0.2 -0.2 -0.3 -0.3 -0.4 -0.4 -0.5 -40 -20 0 20 40 60 80 -0.5 -40 -20 0 C 120 Relative Vorwartsspannung6) Seite 26 Relative Forward Voltage6) page 26 VF = VF - VF(25 C); IF = 140 mA, blue VF OHL04244 V 0.3 0.2 0.1 0 -0.1 -0.2 -0.3 -0.4 -0.5 -40 -20 0 20 40 60 80 C 120 Tj 2009-10-14 20 40 60 80 C 120 Tj Tj 0.5 OHL04243 0.5 12 LRTB C9TP Relative Lichtstarke6) Seite 26 Relative Luminous Intensity6) page 26 V/V(25 C)= f (Tj); IF = 140 mA, red Relative Lichtstarke6) Seite 26 Relative Luminous Intensity6) page 26 IV/IV(25 C) = f (Tj); IF = 140 mA, true green OHL04245 1.6 OHL04246 1.2 IV IV I V (25 C) I V (25 C) 1.2 0.8 1.0 0.8 0.6 0.6 0.4 0.4 0.2 0.2 0 -40 -20 0 20 40 60 80 0 -40 -20 0 C 120 Tj OHL04247 IV I V (25 C) 0.8 0.6 0.4 0.2 0 -40 -20 0 20 40 60 80 C 120 Tj 2009-10-14 C 120 Tj Relative Lichtstarke6) Seite 26 Relative Luminous Intensity6) page 26 IV/IV(25 C) = f (Tj); IF = 140 mA, blue 1.2 20 40 60 80 13 LRTB C9TP Dominante Wellenlange6) Seite 26 Dominant Wavelength6) page 26 dom = f (IF); TS = 25 C; true green 10 nm Dominante Wellenlange6) Seite 26 Dominant Wavelength6) page 26 dom = f (IF); TS = 25 C; blue OHL04240 3.0 nm dom OHL04241 dom 8 2.0 6 1.5 4 1.0 2 0.5 0 0 -2 -4 -0.5 -1.0 30 60 90 120 150 180 210 mA 270 IF 2009-10-14 30 60 90 120 150 180 210 mA 270 IF 14 LRTB C9TP Dominante Wellenlange6) Seite 26 Dominant Wavelength6) page 26 dom = f (Tj); IF = 140 mA, red Dominante Wellenlange6) Seite 26 Dominant Wavelength6) page 26 dom = f (Tj); IF = 140 mA, true green OHL04248 8 nm OHL04249 4.0 nm dom dom 6 3.0 4 2.5 2.0 2 1.5 0 1.0 0.5 -2 0 -4 -0.5 -6 -40 -20 0 20 40 60 80 -1.0 -40 -20 0 C 120 Tj OHL04250 dom 4 3 2 1 0 -1 -2 -3 -40 -20 0 20 40 60 80 C 120 Tj 2009-10-14 C 120 Tj Dominante Wellenlange6) Seite 26 Dominant Wavelength6) page 26 dom = f (Tj); IF = 140 mA, blue 6 nm 20 40 60 80 15 LRTB C9TP Maximal zulassiger Durchlassstrom Max. Permissible Forward Current IF = f (TS); (1 chip on); red IF Maximal zulassiger Durchlassstrom Max. Permissible Forward Current IF = f (TS); (3 chips on); red OHL04260 300 mA IF OHL04262 300 mA 250 250 200 200 150 150 100 100 50 50 Do not use current below 30 mA 0 0 20 40 60 80 Do not use current below 30 mA 0 C 120 0 20 40 60 80 TS Maximal zulassiger Durchlassstrom Max. Permissible Forward Current IF = f (TS); (1 chip on); true green, blue IF Maximal zulassiger Durchlassstrom Max. Permissible Forward Current IF = f (TS); (3 chips on); true green, blue OHL04259 300 mA IF OHL04261 300 mA 250 250 200 200 150 150 100 100 50 50 Do not use current below 30 mA 0 0 20 40 60 80 Do not use current below 30 mA 0 C 120 TS 2009-10-14 C 120 TS 0 20 40 60 80 C 120 TS 16 LRTB C9TP Zulassige Impulsbelastbarkeit Permissible Pulse Handling Capability Duty cycle D = parameter, TS= 25 C IF = f (tp); (1 Chip on); red IF Zulassige Impulsbelastbarkeit Permissible Pulse Handling Capability Duty cycle D = parameter, TS= 85 C IF = f (tp); (1 Chip on); red OHL04253 1.1 A tP t IF IF D = TP T 0.9 0.6 0.5 0.4 0.3 0.5 0.4 0.3 0.2 0.1 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 tp tp Zulassige Impulsbelastbarkeit Permissible Pulse Handling Capability Duty cycle D = parameter, TS= 25 C IF = f (tp); (1 Chip on); true green, blue 0.6 0.5 0.4 1 IF T t 0.005 0.01 0.02 0.05 0.1 0.2 0.33 0.5 0.4 0.2 0.1 0.1 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 IF T D= 0.5 0.3 tP D = TP 0.6 0.2 1 0.005 0.01 0.02 0.05 0.1 0.2 0.33 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 tp 2009-10-14 OHL04252 0.8 IF A 0.7 tP D= 0.5 0.3 Zulassige Impulsbelastbarkeit Permissible Pulse Handling Capability Duty cycle D = parameter, TS= 85 C IF = f (tp); (1 Chip on); true green, blue OHL04251 t 0.005 0.01 0.02 0.05 0.1 0.2 0.33 0.5 1 0.6 0.2 D = TP IF T D= 0.7 0.1 0.8 IF A 0.7 t D = TP 0.8 0.005 0.01 0.02 0.05 0.1 0.2 0.33 0.5 1 0.7 tP 0.9 D= 0.8 OHL04254 1.1 A tp 17 LRTB C9TP Zulassige Impulsbelastbarkeit Permissible Pulse Handling Capability Duty cycle D = parameter, TS= 25 C IF = f (tp); (3 Chip on); red IF Zulassige Impulsbelastbarkeit Permissible Pulse Handling Capability Duty cycle D = parameter, TS= 85 C IF = f (tp); (3 Chip on); red OHL04257 1.1 A t tP IF IF D = TP T 0.9 0.6 0.5 0.4 0.3 IF D = TP T D= 0.8 0.005 0.01 0.02 0.05 0.1 0.2 0.33 0.5 1 0.7 t tP 0.9 D= 0.8 OHL04258 1.1 A 0.005 0.01 0.02 0.05 0.1 0.2 0.33 0.5 1 0.7 0.6 0.5 0.4 0.3 0.2 0.2 0.1 0.1 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 tp tp Zulassige Impulsbelastbarkeit Permissible Pulse Handling Capability Duty cycle D = parameter, TS= 25 C IF = f (tp); (3 Chip on); true green, blue OHL04255 0.8 IF A 0.7 t D = TP 0.6 0.5 0.4 1 IF T t D = TP 0.6 0.005 0.01 0.02 0.05 0.1 0.2 0.33 0.3 0.1 0.1 IF T 0.005 0.01 0.02 0.05 0.1 0.2 0.33 0.5 0.4 0.2 tP D= 0.5 0.2 1 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 tp tp 2009-10-14 OHL04256 0.8 IF A 0.7 tP D= 0.5 0.3 Zulassige Impulsbelastbarkeit Permissible Pulse Handling Capability Duty cycle D = parameter, TS= 85 C IF = f (tp); (3 Chip on); true green, blue 18 LRTB C9TP Exemplarische durchschnittliche Lebensdauer fur mittlere Helligkeitsgruppe6) Seite 26 Exemplary median Lifetime for median Brightness Group6) page 26 Bedingungen mittlere Lebensdauer median Lifetime Conditions IF = 125 mA (1 Chip on red, true green or blue)) TS = 25C Einheit Unit >100.000* Betriebsstunden operating hours IF = 250 mA (red Chip on) TS = 85C >100.000* Betriebsstunden operating hours IF = 250 mA (true green or blue Chip on) TS = 85C >100.000* Betriebsstunden operating hours * lifetime L50 / B50 2009-10-14 19 LRTB C9TP Mazeichnung7) Seite 26 Package Outlines7) page 26 C1 Cathode Red (R) A1 Anode Red (R) C2 Cathode True Green (T) A2 Anode True Green (T) C3 Cathode Blue (B) A3 Anode Blue (B) Gewicht / Approx. weight: 45 mg Gurtung / Polaritat und Lage7) Seite 26 Method of Taping / Polarity and Orientation 2009-10-14 Verpackungseinheit 1000/Rolle, o180 mm 7) page 26 Packing unit 1000/reel, o180 mm 20 LRTB C9TP Cathode/Collector Side o1.5 (0.059) 4.85 (0.191) 3.45 (0.136) 8 (0.315) 5 max. 1.2 (0.047) 12 (0.472) 2 (0.079) 5.5 (0.217) 4 (0.157) 1.75 (0.069) 1.5 (0.059) 0.3 (0.012) OHAY2958 Empfohlenes Lotpaddesign7) 8) Seite 26 Recommended Solder Pad7) 8) page 26 Reflow Loten Reflow Soldering 2.3 (0.091) 2 (0.079) 4.6 (0.0.181) 3.1 (0.0.122) 1.75 (0.069) 1.5 (0.059) 2.85 (0.0.112) 1.4 (0.055) 1.1 (0.043) 3.4 (0.134) OHPY2921 2009-10-14 21 LRTB C9TP Lotbedingungen Soldering Conditions Vorbehandlung nach JEDEC Level 2 Preconditioning acc. to JEDEC Level 2 Reflow Lotprofil fur bleifreies Loten Reflow Soldering Profile for lead free soldering (nach J-STD-020B) (acc. to J-STD-020B) OHLA0687 300 Maximum Solder Profile Recommended Solder Profile Minimum Solder Profile C 255 C 240 C T 250 C 260 C +0 -5 C 245 C 5 C C 235 C +5 -0 C 217 C 10 s min 200 30 s max Ramp Down 6 K/s (max) 150 100 s max 120 s max 100 Ramp Up 3 K/s (max) 50 25 C 0 0 50 100 150 200 250 s 300 t Wellenloten (TTW) TTW Soldering (nach CECC 00802) (acc. to CECC 00802) OHLY0598 300 C T 10 s 250 Normalkurve standard curve 235 C ... 260 C Grenzkurven limit curves 2. Welle 2. wave 200 1. Welle 1. wave 150 ca 200 K/s 2 K/s 5 K/s 100 C ... 130 C 100 2 K/s 50 Zwangskuhlung forced cooling 0 0 50 100 150 200 t 2009-10-14 22 s 250 LRTB C9TP Barcode-Produkt-Etikett (BPL) Barcode-Product-Label (BPL) OSRAM Opto Lxxx xxxx Bin1: Bin Information Color 1 Bin2: Bin Information Color 2 Product Name Bin3: Bin Information Color 3 pl e Semiconductors RoHS Compliant ML Temp ST 2 245 C RT (6P) BATCH NO: Batch Number Bar Code Additional TEXT (9D) D/C: Date Code Sa m (1T) LOT NO: Lot Number R077 Bar Code (X) PROD NO: Product Code (Q)QTY: Product Quantity per Reel DEMY PACKVAR: Packing Type Color 1 Color 2 Color 3 (G) GROUP: X-X-X+X-X-X+X-X-X Bar Code Forward Voltage Group Wavelength Group Brightness Group OHA32043 Gurtverpackung Tape and Reel W1 D0 P0 A N F W E 13.0 0.25 P2 Label P1 Direction of unreeling Direction of unreeling W2 Gurtvorlauf: 400 mm 400 mm Leader: Gurtende: Trailer: 160 mm 160 mm OHAY0324 Tape dimensions in mm (inch) W P0 P1 P2 D0 E F 12 + 0.3 - 0.1 4 0.1 8 0.1 2 0.05 1.5 + 0.1 1.75 0.1 5.5 0.05 (0.157 0.004) (0.315 0.004) (0.079 0.002) (0.059 + 0.004) (0.069 0.004) (0.217 0.002) Reel dimensions in mm (inch) A 180 (7) 2009-10-14 W Nmin W1 W2 max 12 (0.472) 60 (2.362) 12.4 + 2 (0.488 + 0.079) 18.4 (0.724) 23 LRTB C9TP Trockenverpackung und Materialien Dry Packing Process and Materials Moisture-sensitive label or print L VE LE Barcode label l see labe k, If code blan bar ). (RH . RH idity hum 0% e tive d C/6 kag rela are 30 s _ < infr pac IVE RS of TO rs 90% to ak tain SIT rs < ns ed (pe UC e). or rs con Hou SEN rs Hou ND and ject ditio cod C, 72 sing Hou e 5 bag E 48 C sub Hou con s UR ICO ces 24 6 dat 40 be time C ory ThiISTSEM pro < time . or 23 time at t will l with or fact entC) . MO Flo time s TO at or at Flo l tica d tha or ival ure nth OP Flo 4 if: rea w Flo labe mo ices iden 5 ced equ el n e 5a is el ing, belo or 24 pro 6 Lev e dev : el e cod , unt whe Lev el re ow, see bag Lev l dat re mo bak bar ned Lev refl istu 10% re led time sea for istu ore> re ope e Mo see istu k, is or . sea is has k, Mo bef istu d 033 Mo in Flo RH blan Mo or-p blan in bag Car ing, r TDlife (if If with t. r lf 10%bak or J-S thisvapp. Yea _ eks rs < r ed icat med, C 1 Yea tem She ow, at uire not > y 1 WeHou DE unt Afte Ind 4 uire refl is red req 2. bod Mo /JE time 168 req : 2b a) Sto ices idity time or is IPC or time b) ned Flo or Hum ing ce time or Dev 2a e Flo a) ope or 3. b) bakren Flo 1 l dat Flo If 2 refe time el 2a 4. el sea 3 Lev el and Lev el re Bag e Lev re Lev istu Dat re istu re Mo istu Mo istu Mo Mo N O TI U A C 1. M RA OS Humidity indicator Barcode label Please check the HIC immidiately after bag opening. Discard if circles overrun. Avoid metal contact. Do not eat. Comparator check dot WET If wet, examine units, if necessary bake units 15% If wet, examine units, if necessary bake units 10% 5% If wet, parts still adequately dry. change desiccant Humidity Indicator MIL-I-8835 AM OSR Desiccant OHA00539 Anm.: Feuchteempfindliche Produkte sind verpackt in einem Trockenbeutel zusammen mit einem Trockenmittel und einer Feuchteindikatorkarte Bezuglich Trockenverpackung finden Sie weitere Hinweise im Internet und in unserem Short Form Catalog im Kapitel "Gurtung und Verpackung" unter dem Punkt "Trockenverpackung". Hier sind Normenbezuge, unter anderem ein Auszug der JEDEC-Norm, enthalten. Note: Moisture-senisitve product is packed in a dry bag containing desiccant and a humidity card. Regarding dry pack you will find further information in the internet and in the Short Form Catalog in chapter "Tape and Reel" under the topic "Dry Pack". Here you will also find the normative references like JEDEC. Kartonverpackung und Materialien Transportation Packing and Materials 8 Q- 1 R1 lti LS TO Y T6 PL 76 1+ P- Mu rs D/C : 01 to uc nd 00 (9D ) 4 co 20 NO : 23 O SR mi AM H1 Se BA TC H 3G (6P ) LO T (1T ) NO : 8 P- 1+ Q- 1 R1 lti LS TO Y T6 PL 76 DE MY (X) PR OD 5 14 2 110 0 (Q) QT Y: O pt o 998 021 210 (G) AM 99 8 D/C : 01 21 00 (9D ) 00 SR 21 : 4 20 23 O (6P ) (X) PR OD O NO : (1T ) 11 00 LO T 14 2 5 NO : 12 3G BA TC H H1 (Q) QT Y: Se SR m A ico M nd O uc pt to o rs NO 44 Mu 44 ). NO : 12 see labe N ED Bin Bin 1: Bin 2: P-1 3: Q-1 -20 ML -20 2 Te 2a 220 mp 3 240 ST Ad 260 C R C R0 diti R ona C RT PA 77 l TE CK VA XT R: TIO GR OU P: U Muster A (G) l k, C GR OU P: Muster L VE LE code (RH blan If y bar . idit RH hum 60% e tive d C/ kag rela are 30 E S s _ < infr pac OR of tainITIV 90% to ak urs CT < e). or urs ted (pe ons con NS Ho g urs SE DU Ho and jec diti cod C, 72 sin Ho urs e 5 bag E ON 48 C sub e Ho con ces is UR 24 6 dat e MIC 40 be tim h C e ThISTSE pro < tory tim . or t wit 23 tim e at t will C) or fac MO . Flo al len tim TO s at or at Flo d or iva ure el nth s tha OP ntic Flo 4 if: rea Flo , lab ow mo ice equ ide 5 ced el e 5a is el ingen bel or 24 pro 6 Lev e dev, : el cod e , unt wh Lev el re ow see bag Lev l dat re mo bak e bar ned Lev refl istu 10% re led tim sea for istu ore> re ope se Mo see 3 istu is or . sea is Mo nk, bef istu pha nk, Flo , rd -03 Mo in RH bla Mo orbag bla hin ingCa TD life (if ar If wit t. vapp. 10%baktor J-S this elf Ye ar eks , _ < ed ica med, C 1 urs Ye erow tem Sh at uire not > y 1 WeHo unt DE Aft Ind 1. e 4 uire refl red req 2. bod Mo e ity is /JE tim 168 req : e 2b a) Sto es tim or mid is IPC or tim e vic b) ned Flo or Hu tim ing ce or De e 2a Flo a) ope or 3. b) bakren Flo e 1 l dat Flo If 2 el refe tim 2a 4. el sea 3 Lev g el and Lev el re Ba te Lev re Lev istu Da re istu re Mo istu Mo istu Mo Mo DE MY Barcode label ED Bin Bin 1: Bin 2: P-1 3: Q-1 -20 ML -20 2 Tem 2a 220 3 240 p ST Ad 260 C R C R0 diti R ona C RT PA 77 l TE CK VA XT R: Barcode label Packing Sealing label 2009-10-14 24 OHA02044 LRTB C9TP Revision History: 2009-10-14 Previous Version: 2009-07-28 Page Subjects (major changes since last revision) Date of change all Preliminary Data Sheet 2009-07-28 2, 6, 7, 8 ordering code changed 2009-10-14 4, 8 Dominant wavelength: Color blue: groups 8 and 9 removed 2009-10-14 5, 6 Chromaticity Coordinate Groups: Color blue: groups 8 and 9 removed 2009-10-14 Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. If printed or downloaded, please find the latest version in the Internet. Packing Please use the recycling operators known to you. We can also help you - get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components9) page 26 may only be used in life-support devices or systems10) page 26 with the express written approval of OSRAM OS. 2009-10-14 25 LRTB C9TP Funoten: 1) 2) 3) 4) 5) 6) 7) 8) 9) 10) Remarks: 1) Brightness groups are tested at a current pulse duration of 25 ms and a tolerance of 11%. Helligkeitswerte werden mit einer und einer Stromeinpragedauer von 25 ms Genauigkeit von 11% ermittelt. Die LED kann kurzzeitig in Sperrichtung betrieben werden. Wellenlangen werden mit einer Stromeinpragedauer von 25 ms und einer Genauigkeit von 1 nm ermittelt. Spannungswerte werden mit einer Stromeinpragedauer von 1 ms und einer Genauigkeit von 0,1 V ermittelt. Wegen der besonderen Prozessbedingungen bei der Herstellung von LED konnen typische oder abgeleitete technische Parameter nur aufgrund statistischer Werte wiedergegeben werden. Diese stimmen nicht notwendigerweise mit den Werten jedes einzelnen Produktes uberein, dessen Werte sich von typischen und abgeleiteten Werten oder typischen Kennlinien unterscheiden konnen. Falls erforderlich, z.B. aufgrund technischer Verbesserungen, werden diese typischen Werte ohne weitere Ankundigung geandert. Im gestrichelten Bereich der Kennlinien muss mit erhohten Helligkeitsunterschieden zwischen Leuchtdioden innerhalb einer Verpackungseinheit gerechnet werden. Dimmverhaltnis im Gleichstrom-Betrieb max. 5:1 fur red Mae werden wie folgt angegeben: mm (inch) Gehause halt TTW-Lothitze aus nach CECC 00802 2) 3) 4) 5) 6) 7) 8) 9) Ein kritisches Bauteil ist ein Bauteil, das in lebenserhaltenden Apparaten oder Systemen eingesetzt wird und dessen Defekt voraussichtlich zu einer Fehlfunktion dieses lebenserhaltenden Apparates oder Systems fuhren wird oder die Sicherheit oder Effektivitat dieses Apparates oder Systems beeintrachtigt. Lebenserhaltende Apparate oder Systeme sind fur (a) die Implantierung in den menschlichen Korper oder (b) fur die Lebenserhaltung bestimmt. Falls sie versagen, kann davon ausgegangen werden, dass die Gesundheit und das Leben des Patienten in Gefahr ist. 10) Published by OSRAM Opto Semiconductors GmbH Leibnizstrasse 4, D-93055 Regensburg www.osram-os.com (c) All Rights Reserved. 2009-10-14 26 Driving the LED in reverse direction is suitable for short term application. Wavelengths are tested at a current pulse duration of 25 ms and a tolerance of 1 nm. Forward voltages are tested at a current pulse duration of 1 ms and a tolerance of 0.1 V. Due to the special conditions of the manufacturing processes of LED, the typical data or calculated correlations of technical parameters can only reflect statistical figures. These do not necessarily correspond to the actual parameters of each single product, which could differ from the typical data and calculated correlations or the typical characteristic line. If requested, e.g. because of technical improvements, these typ. data will be changed without any further notice. In the range where the line of the graph is broken, you must expect higher brightness differences between single LEDs within one packing unit. Dimming range for direct current mode max. 5:1 for red Dimensions are specified as follows: mm (inch) Package able to withstand TTW-soldering heat acc. to CECC 00802 A critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that device or system. Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health and the life of the user may be endangered.