!Note * This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Chip Monolithic Ceramic Capacitors Cat.No.C02E-15 C02E.pdf 09.9.18 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. CONTENTS Part Numbering 2 Selection Guide 7 1 for General Purpose GRM Series 8 1 Specifications and Test Methods 51 GRM Series Data 2 Capacitor Array GNM Series 2 Specifications and Test Methods 3 Low ESL LLL/LLA/LLM Series 3 Specifications and Test Methods 4 High-Q Type GJM Series 4 Specifications and Test Methods 5 High Frequency GQM Series 5 Specifications and Test Methods GQM Series Data 6 8 63 68 74 81 85 95 98 105 108 High Frequency Type ERB Series 109 6 Specifications and Test Methods 116 ERB Series Data 7 60 119 Monolithic Microchip GMA Series 121 7 Specifications and Test Methods 123 for Bonding GMD Series 8 Specifications and Test Methods 127 132 Package 136 !Caution 140 Notice 152 Reference Data 159 9 Medium Voltage Low Dissipation Factor 166 10 Medium Voltage High Capacitance for General Use 171 11 Only for LCD Backlight Inverter Circuit 176 12 Only for Information Devices 179 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 1 2 13 Only for Camera Flash Circuit 183 14 AC250V (r.m.s.) Type (Which Meet Japanese Law) 187 15 Safety Standard Certified Type GC (UL, IEC60384-14 Class X1/Y2) 191 16 Safety Standard Certified Type GD (IEC60384-14 Class Y3) 192 17 Safety Standard Certified Type GF (IEC60384-14 Class Y2, X1/Y2) 193 18 Safety Standard Certified Type GB (IEC60384-14 Class X2) 195 GA3 Series Specifications and Test Methods 196 GRM/GR4/GR7/GA2/GA3 Series Data (Typical Example) 200 Package 203 !Caution 206 Notice 214 ISO 9001 Certifications 217 3 4 5 6 7 8 9 10 Please refer to "Specifications and Test Methods" at the end of each chapter of 9 - 14 . 11 12 13 14 15 16 17 for EU RoHS Compliant * * * All the products in this catalog comply with EU RoHS. EU RoHS is "the European Directive 2002/95/EC on the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment". For more details, please refer to our website 'Murata's Approach for EU RoHS' (http://www.murata.com/info/rohs.html). Please check MURATA home page (http://www.murata.com/index.html) in case you can not find the part number on the catalog. 18 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. o Part Numbering Chip Monolithic Ceramic Capacitors (Part Number) GR M 18 8 q w e r t B1 1H y 102 K u i A01 D o !0 rDimension (T) qProduct ID wSeries Code Dimension (T) Code Series 2 0.2mm M Tin Plated Layer 2 2-elements (Array Type) GR 4 Only for Information Devices / Tip & Ring 3 0.3mm 7 Only for Camera Flash Circuit 4 4-elements (Array Type) ER B High Frequency Type 5 0.5mm M High Frequency for Flow/Reflow Soldering 6 0.6mm 7 0.7mm A Monolithic Microchip 8 0.8mm D for Bonding 9 0.85mm M Capacitor Array A 1.0mm L Low ESL Wide Width Type B 1.25mm Product ID GQ GM GN LL GJ GA A Eight-termination Low ESL Type C 1.6mm M Ten-termination Low ESL Type D 2.0mm M High Frequency Low Loss Type E 2.5mm 2 for AC250V (r.m.s.) F 3.2mm 3 Safety Standard Certified Type M 1.15mm eDimension (LgW) N 1.35mm Q 1.5mm R 1.8mm Code Dimension (LgW) EIA S 2.8mm 02 0.4g0.2mm 01005 X Depends on individual standards. 03 0.6g0.3mm 0201 05 0.5g0.5mm 0202 08 0.8g0.8mm 0303 0D 0.38g0.38mm 015015 0M 0.9g0.6mm 0302 11 1.25g1.0mm 0504 15 1.0g0.5mm 0402 18 1.6g0.8mm 0603 1M 1.37g1.0mm 0504 21 2.0g1.25mm 0805 22 2.8g2.8mm 1111 31 3.2g1.6mm 1206 32 3.2g2.5mm 1210 42 4.5g2.0mm 1808 43 4.5g3.2mm 1812 52 5.7g2.8mm 2211 55 5.7g5.0mm 2220 With the array type GNM series, "Dimension(T)" indicates the number of elements. Continued on the following page. Please check MURATA home page (http://www.murata.com/index.html) in case you can not find the part number on the catalog. 2 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Continued from the preceding page. tTemperature Characteristics Temperature Characteristic Codes Code Public STD Code Temperature Characteristics Reference Temperature Temperature Range Capacitance Change or Temperature Coefficient Operating Temperature Range 1X SL *1 JIS 20C 20 to 85C +350 to -1000ppm/C -55 to 125C 2C CH *1 JIS 20C 20 to 125C 060ppm/C -55 to 125C 2P PH *1 JIS 20C 20 to 85C -15060ppm/C -25 to 85C 2R RH *1 JIS 20C 20 to 85C -22060ppm/C -25 to 85C 2S SH *1 JIS 20C 20 to 85C -33060ppm/C -25 to 85C 2T TH *1 JIS 20C 20 to 85C -47060ppm/C -25 to 85C 3C CJ *1 JIS 20C 20 to 125C 0120ppm/C -55 to 125C 3P PJ *1 JIS 20C 20 to 85C -150120ppm/C -25 to 85C 3R RJ *1 JIS 20C 20 to 85C -220120ppm/C -25 to 85C 3S SJ *1 JIS 20C 20 to 85C -330120ppm/C -25 to 85C 3T TJ *1 JIS 20C 20 to 85C -470120ppm/C -25 to 85C 3U UJ *1 JIS 20C 20 to 85C -750120ppm/C -25 to 85C 4C CK *1 JIS 20C 20 to 125C 0250ppm/C -55 to 125C 5C C0G *1 EIA 25C 25 to 125C 030ppm/C -55 to 125C 5G X8G *1 EIA 25C 25 to 150C 030ppm/C -55 to 150C 6C C0H *1 EIA 25C 25 to 125C 060ppm/C -55 to 125C 6P P2H *1 EIA 25C 25 to 85C -15060ppm/C -55 to 125C 6R R2H *1 EIA 25C 25 to 85C -22060ppm/C -55 to 125C 6S S2H *1 EIA 25C 25 to 85C -33060ppm/C -55 to 125C 6T T2H *1 EIA 25C 25 to 85C -47060ppm/C -55 to 125C 7U U2J *1 EIA 25C 25 to 125C *6 -750120ppm/C -55 to 125C B1 B *2 JIS 20C -25 to 85C 10% -25 to 85C B3 B JIS 20C -25 to 85C 10% -25 to 85C C7 X7S EIA 25C -55 to 125C 22% -55 to 125C C8 X6S EIA 25C -55 to 105C 22% -55 to 105C D7 X7T EIA 25C -55 to 125C +22, -33% -55 to 125C D8 X6T EIA 25C -55 to 105C +22, -33% -55 to 105C E7 X7U EIA 25C -55 to 125C +22, -56% -55 to 125C -25 to 85C F1 F *2 JIS 20C -25 to 85C +30, -80% F5 Y5V EIA 25C -30 to 85C +22, -82% -30 to 85C L8 X8L *3 25C -55 to 150C +15, -40% -55 to 150C R1 R *2 JIS 20C -55 to 125C 15% -55 to 125C -55 to 125C R3 R JIS 20C -55 to 125C 15% R6 X5R EIA 25C -55 to 85C 15% -55 to 85C R7 X7R EIA 25C -55 to 125C 15% -55 to 125C R9 X8R EIA 25C -55 to 150C 15% -55 to 150C W0 - - 25C -55 to 125C 10% *4 -55 to 125C +22, -33% *5 *1 Please refer to table for Capacitance Change under reference temperature. *2 Capacitance change is specified with 50% rated voltage applied. *3 Murata Temperature Characteristic Code. *4 Apply DC350V bias. *5 No DC bias. *6 Rated Voltage 100Vdc max : 25 to 85C Continued on the following page. Please check MURATA home page (http://www.murata.com/index.html) in case you can not find the part number on the catalog. 3 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Continued from the preceding page. oCapacitance Change from each temperature JIS Code Capacitance Change from 20C (%) Murata Code -55C -25C -10C Max. Min. Max. Min. Max. 1X - - - - - Min. - 2C 0.82 -0.45 0.49 -0.27 0.33 -0.18 2P - - 1.32 0.41 0.88 0.27 2R - - 1.70 0.72 1.13 0.48 2S - - 2.30 1.22 1.54 0.81 2T - - 3.07 1.85 2.05 1.23 3C 1.37 -0.90 0.82 -0.54 0.55 -0.36 3P - - 1.65 0.14 1.10 0.09 3R - - 2.03 0.45 1.35 0.30 3S - - 2.63 0.95 1.76 0.63 3T - - 3.40 1.58 2.27 1.05 3U - - 4.94 2.84 3.29 1.89 4C 2.56 -1.88 1.54 -1.13 1.02 -0.75 EIA Code Capacitance Change from 25C (%) Murata Code -55C -30C -10C Max. Min. Max. Min. Max. Min. 5C/5G 0.58 -0.24 0.40 -0.17 0.25 -0.11 6C 0.87 -0.48 0.59 -0.33 0.38 -0.21 6P 2.33 0.72 1.61 0.50 1.02 0.32 6R 3.02 1.28 2.08 0.88 1.32 0.56 6S 4.09 2.16 2.81 1.49 1.79 0.95 6T 5.46 3.28 3.75 2.26 2.39 1.44 7U 8.78 5.04 6.04 3.47 3.84 2.21 Continued on the following page. Please check MURATA home page (http://www.murata.com/index.html) in case you can not find the part number on the catalog. 4 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Continued from the preceding page. yRated Voltage uCapacitance 0J DC6.3V Expressed by three-digit alphanumerics. The unit is pico-farad (pF). The first and second figures are significant digits, and the third figure expresses the number of zeros which follow the two numbers.If there is a decimal point, it is expressed by the capital letter "R". In this case, all figures are significant digits. 1A DC10V Ex.) Code Capacitance 1C DC16V R50 0.5pF 1E DC25V 1R0 1.0pF YA DC35V 100 10pF 1H DC50V 103 10000pF 2A DC100V 2D DC200V 2E DC250V YD DC300V 2H DC500V 2J DC630V 3A DC1kV Code Rated Voltage 0E DC2.5V 0G DC4V 3D DC2kV 3F DC3.15kV BB DC350V (for Camera Flash Circuit) E2 AC250V GB X2; AC250V (Safety Standard Certified Type GB) GC X1/Y2; AC250V (Safety Standard Certified Type GC) GD Y3; AC250V (Safety Standard Certified Type GD) GF Y2, X1/Y2; AC250V (Safety Standard Certified Type GF) Continued on the following page. Please check MURATA home page (http://www.murata.com/index.html) in case you can not find the part number on the catalog. 5 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Continued from the preceding page. iCapacitance Tolerance Capacitance Step Code Capacitance Tolerance TC Series W 0.05pF C GRM/GJM V9.9pF 0.1pF GRM/GJM V9.9pF 0.1pF V1pF 0.1pF 0.1pF B C GQM ERB V9.9pF 1pF Step and E24 Series C GRM/GJM V9.9pF 0.1pF except C GRM V5pF * 1pF ERB V9.9pF 1pF Step and E24 Series V1pF 0.1pF 0.25pF C C 0.5pF D GRM/GJM 5.1 to 9.9pF 0.1pF GRM 5.1 to 9.9pF * 1pF C ERB/GQM C GJM U10pF E12 Series C GQM/ERB U10pF E24 Series GRM/GA3 U10pF E12 Series C ERB/GQM/GJM U10pF E24 Series B, R, X7R, X5R, ZLM GRM/GR7/GA3 C0G GNM E6 Series B, R, X7R, X5R, ZLM GR4, GMD E12 Series B, R, X7R, X7S GRM/GMA E6 Series X5R, X7R, X7S GNM E3 Series E3 Series 20% M 5.1 to 9.9pF 1pF Step and E24 Series C-SL 10% K Z C 5% J 1.1 to 9.9pF 1pF Step and E24 Series except C 2% G GQM 1.1 to 9.9pF 1pF Step and E24 Series E6 Series X7R GA2 X5R, X7R, X7S, X6S LLL/LLA/LLM E3 Series F, Y5V GRM E3 Series +80%, -20% R Depends on individual standards. * E24 series is also available. oIndividual Specification Code Expressed by three figures. !0Packaging Code Packaging L o180mm Embossed Taping D o180mm Paper Taping E o180mm Paper Taping (LLL15) K o330mm Embossed Taping J o330mm Paper Taping F o330mm Paper Taping (LLL15) B Bulk C Bulk Case T Bulk Tray Please check MURATA home page (http://www.murata.com/index.html) in case you can not find the part number on the catalog. 6 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Selection Guide of Chip Monolithic Ceramic Capacitors Function Type High Capacitance Series GRM (X5R, X7R, Y5V etc.) 68pF-100F Decoupling, Smoothing Array (2 or 4 Elements) GNM 10pF-2.2F GRM (C0G) Frequency Control/Tuning, Impedance Matching 0.1pF-0.1F Class1 TC's; GRM (U2J etc.) Low Inductance (Reverse Geometry) LLL 2200pF-10F High Speed Decoupling Low Inductance (Multi Termination) Low ESR (50V to 500V) High Frequency Low ESR, Ultra Small Lowest ESR Start LLA/LLM (From 1GHz) 0.01F-4.7F ERB (1MHz to 1GHz) 0.5pF-1000pF GJM (500MHz to 10GHz) 0.1pF-33pF GQM (500MHz to 10GHz) 0.1pF-100pF GMA 100pF-0.47F GMD 100pF-1F Optical Communications Wire-Die-Bonding Medium Voltage High Frequency Snubber 250V/630V/1kV/2kV/3.15kV Low Dissipation Medium Voltage LCD Backlight Inverter 3.15kV Low Dissipation GRM (C0G) Medium Voltage Decoupling, Smoothing 250V/630V/1kV High Capacitance GRM (X7R) Medium Voltage Only for Camera Flash Circuit 350V High Capacitance 10000pF-47000pF 2kV High Capacitance 100pF-10000pF Safety Standard Certified Type GD 10pF-4700pF Type GF 10pF-4700pF Safety Standard Certified Type GC 100pF-330pF Type GF 470pF-4700pF Type GB 10000pF-33000pF AC250V which meet Japanese Law 470pF-0.1F Medium Voltage Only for Information Devices / Tip & Ring AC Lines Noise Removal Automotive (Power-train, Safety Equipment) Medium Voltage for Automotive (Power-train, Safety Equipment) High Capacitance Class1 TC's; 250V/630V Low Dissipation GRM (U2J) 10pF-10000pF 5pF-47pF 220pF-1F GR7 GR4 GA2 GCM (X7R etc.) 100pF-47F GCM (C0G etc.) 1.0pF-0.1F GCM (U2J) 10pF-10000pF 7 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Chip Monolithic Ceramic Capacitors 1 for General Purpose GRM Series 1. Higher resistance of solder-leaching due to the Ni-barriered termination, applicable for reflow-soldering, and flow-soldering (GRM18/21/31 type only). 2. The GRM series is lead free product. 3. Smaller size and higher capacitance value. 4. High reliability and no polarity. 5. Excellent pulse responsibility and noise reduction due to the low impedance at high frequency. 6. The GRM series is available in paper or embossed tape and reel packaging for automatic placement. Bulk case packaging is also available for GRM15/ 18/21(T=0.6,1.25). 7. Ta replacement. Applications General electronic equipment 8 Part Number GRM022 GRM033 GRM15X GRM153 GRM155 GRM185 GRM188* GRM216 GRM219 GRM21A GRM21B GRM316 GRM319 GRM31M GRM31C GRM329 GRM32A GRM32M GRM32N GRM32C GRM32R GRM32D GRM32E L Dimensions (mm) W T e 0.4 0.02 0.2 0.02 0.2 0.02 0.07 to 0.14 0.6 0.03 0.3 0.03 0.3 0.03 0.1 to 0.2 0.25 0.05 0.1 to 0.3 1.0 0.05 0.5 0.05 0.3 0.03 0.5 0.05 0.15 to 0.35 0.5 +0/-0.1 0.2 to 0.5 1.6 0.1 0.8 0.1 0.8 0.1 0.6 0.1 0.85 0.1 0.2 to 0.7 2.0 0.1 1.25 0.1 1.0 +0/-0.2 1.25 0.1 0.6 0.1 3.2 0.15 1.6 0.15 0.85 0.1 0.3 to 0.8 1.15 0.1 3.2 0.2 1.6 0.2 1.6 0.2 0.85 +0.15/-0.05 1.0 +0/-0.2 1.15 0.1 1.35 0.15 0.3 min. 3.2 0.3 2.5 0.2 1.6 0.2 1.8 0.2 2.0 0.2 2.5 0.2 g min. 0.13 0.2 0.4 0.3 0.5 0.7 1.5 e g e 1.0 * Bulk Case: 1.6 0.07(L)g0.8 0.07(W)g0.8 0.07(T) * The figure indicates typical Specification. T Features L W PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Capacitance Table 1 Temperature Compensating Type C0G(5C),U2J(7U) Characteristics 6 ex.6: T Dimension [mm] TC 0.4x0.2 (02) <01005> LxW [mm] C0G(5C) 0.6x0.3 1.0x0.5 1.6x0.8 (03) (15) (18) <0201> <0402> <0603> 2.0x1.25 (21) <0805> 3.2x1.6 (31) <1206> 0.6x0.3 (03) <0201> U2J(7U) 1.0x0.5 1.6x0.8 (15) (18) <0402> <0603> 2.0x1.25 3.2x1.6 (21) (31) <0805> <1206> Rated Voltage 16 10 6.3 50 50 100 50 100 50 100 50 50 25 50 10 50 10 50 10 50 [Vdc] (1C) (1A) (0J) (1H) (1H) (1E) (1H) (1E) (1H) (1E) (1H) (1H) (1E) (1H) (1A) (1H) (1A) (1H) (1A) (1H) Capacitance 0.1pF(R10) 3 3, 5 0.2pF(R20) 2 3 3, 5 0.3pF(R30) 2 3 3, 5 0.4pF(R40) 2 3 3, 5 0.5pF(R50) 2 3 3, 5 0.6pF(R60) 2 3 3, 5 0.7pF(R70) 2 3 3, 5 0.8pF(R80) 2 3 3, 5 0.9pF(R90) 2 3 3, 5 1.0pF(1R0) 2 3 3, 5 1.1pF(1R1) 2 3 3, 5 1.2pF(1R2) 2 3 3, 5 1.3pF(1R3) 2 3 3, 5 1.4pF(1R4) 2 3 3, 5 1.5pF(1R5) 2 3 3, 5 1.6pF(1R6) 2 3 3, 5 1.7pF(1R7) 2 3 3, 5 1.8pF(1R8) 2 3 3, 5 1.9pF(1R9) 2 3 3, 5 2.0pF(2R0) 2 3 3, 5 2.1pF(2R1) 2 3 3, 5 2.2pF(2R2) 2 3 3, 5 2.3pF(2R3) 2 3 3, 5 2.4pF(2R4) 2 3 3, 5 2.5pF(2R5) 2 3 3, 5 2.6pF(2R6) 2 3 3, 5 2.7pF(2R7) 2 3 3, 5 2.8pF(2R8) 2 3 3, 5 2.9pF(2R9) 2 3 3, 5 3.0pF(3R0) 2 3 3, 5 3.1pF(3R1) 2 3 3, 5 3.2pF(3R2) 2 3 3, 5 3.3pF(3R3) 2 3 3, 5 3.4pF(3R4) 2 3 3, 5 3.5pF(3R5) 2 3 3, 5 3.6pF(3R6) 2 3 3, 5 3.7pF(3R7) 2 3 3, 5 3.8pF(3R8) 2 3 3, 5 3.9pF(3R9) 2 3 3, 5 4.0pF(4R0) 2 3 3, 5 4.1pF(4R1) 2 3 3, 5 4.2pF(4R2) 2 3 3, 5 4.3pF(4R3) 2 3 3, 5 4.4pF(4R4) 2 3 3, 5 4.5pF(4R5) 2 3 3, 5 4.6pF(4R6) 2 3 3, 5 4.7pF(4R7) 2 3 3, 5 4.8pF(4R8) 2 3 3, 5 4.9pF(4R9) 2 3 3, 5 The part number code is shown in ( ) and Unit is shown in [ ]. 3 5 3 5 3 5 3 5 < >: EIA [inch] Code Continued on the following page. 9 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 1 Capacitance Table Continued from the preceding page. 6 ex.6: T Dimension [mm] TC 0.4x0.2 (02) <01005> LxW [mm] C0G(5C) 0.6x0.3 1.0x0.5 1.6x0.8 (03) (15) (18) <0201> <0402> <0603> 2.0x1.25 (21) <0805> 3.2x1.6 (31) <1206> 0.6x0.3 (03) <0201> U2J(7U) 1.0x0.5 1.6x0.8 (15) (18) <0402> <0603> 2.0x1.25 3.2x1.6 (21) (31) <0805> <1206> Rated Voltage 16 10 6.3 50 50 100 50 100 50 100 50 50 25 50 10 50 10 50 10 50 [Vdc] (1C) (1A) (0J) (1H) (1H) (1E) (1H) (1E) (1H) (1E) (1H) (1H) (1E) (1H) (1A) (1H) (1A) (1H) (1A) (1H) Capacitance 5.0pF(5R0) 2 3 3, 5 5.1pF(5R1) 2 3 3, 5 5.2pF(5R2) 2 3 3, 5 5.3pF(5R3) 2 3 3, 5 5.4pF(5R4) 2 3 3, 5 5.5pF(5R5) 2 3 3, 5 5.6pF(5R6) 2 3 3, 5 5.7pF(5R7) 2 3 3, 5 5.8pF(5R8) 2 3 3, 5 5.9pF(5R9) 2 3 3, 5 6.0pF(6R0) 2 3 3, 5 6.1pF(6R1) 2 3 3, 5 6.2pF(6R2) 2 3 3, 5 6.3pF(6R3) 2 3 3, 5 6.4pF(6R4) 2 3 3, 5 6.5pF(6R5) 2 3 3, 5 6.6pF(6R6) 2 3 3, 5 6.7pF(6R7) 2 3 3, 5 6.8pF(6R8) 2 3 3, 5 6.9pF(6R9) 2 3 3, 5 7.0pF(7R0) 2 3 3, 5 7.1pF(7R1) 2 3 3, 5 7.2pF(7R2) 2 3 3, 5 7.3pF(7R3) 2 3 3, 5 7.4pF(7R4) 2 3 3, 5 7.5pF(7R5) 2 3 3, 5 7.6pF(7R6) 2 3 3, 5 7.7pF(7R7) 2 3 3, 5 7.8pF(7R8) 2 3 3, 5 7.9pF(7R9) 2 3 3, 5 8.0pF(8R0) 2 3 3, 5 8.1pF(8R1) 2 3 3, 5 8.2pF(8R2) 2 3 3, 5 8.3pF(8R3) 2 3 3, 5 8.4pF(8R4) 2 3 3, 5 8.5pF(8R5) 2 3 3, 5 8.6pF(8R6) 2 3 3, 5 8.7pF(8R7) 2 3 3, 5 8.8pF(8R8) 2 3 3, 5 8.9pF(8R9) 2 3 3, 5 9.0pF(9R0) 2 3 3, 5 9.1pF(9R1) 2 3 3, 5 9.2pF(9R2) 2 3 3, 5 9.3pF(9R3) 2 3 3, 5 9.4pF(9R4) 2 3 3, 5 9.5pF(9R5) 2 3 3, 5 9.6pF(9R6) 2 3 3, 5 9.7pF(9R7) 2 3 3, 5 9.8pF(9R8) 2 3 3, 5 9.9pF(9R9) 2 3 3, 5 The part number code is shown in ( ) and Unit is shown in [ ]. 3 5 3 5 3 5 3 5 3 5 < >: EIA [inch] Code Continued on the following page. 10 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Capacitance Table Continued from the preceding page. 6 ex.6: T Dimension [mm] C0G(5C) 0.6x0.3 1.0x0.5 1.6x0.8 (03) (15) (18) <0201> <0402> <0603> TC 0.4x0.2 (02) <01005> LxW [mm] 2.0x1.25 (21) <0805> 3.2x1.6 (31) <1206> 0.6x0.3 (03) <0201> U2J(7U) 1.0x0.5 1.6x0.8 (15) (18) <0402> <0603> 2.0x1.25 3.2x1.6 (21) (31) <0805> <1206> Rated Voltage 16 10 6.3 50 50 100 50 100 50 100 50 50 25 50 10 50 10 50 10 50 [Vdc] (1C) (1A) (0J) (1H) (1H) (1E) (1H) (1E) (1H) (1E) (1H) (1H) (1E) (1H) (1A) (1H) (1A) (1H) (1A) (1H) Capacitance 10pF(100) 2 3 3, 5 8 8 3 5 12pF(120) 2 3 3, 5 8 8 3 5 15pF(150) 2 3 3, 5 8 8 3 18pF(180) 2 3 3, 5 8 8 3 5 22pF(220) 2 3 3, 5 8 8 3 5 27pF(270) 2 3 3, 5 8 8 3 5 33pF(330) 2 3 3, 5 8 8 3 5 39pF(390) 2 3 3, 5 8 8 3 5 47pF(470) 2 3 3, 5 8 8 3 5 5 56pF(560) 2 2 3 3, 5 8 8 3 5 68pF(680) 2 2 3 3, 5 8 8 3 5 82pF(820) 2 2 3 3, 5 8 8 3 5 100pF(101) 2 2 3 3, 5 8 8 6 3 5 120pF(121) 3, 5 8 8 6 5 150pF(151) 3, 5 8 8 6 5 180pF(181) 3, 5 8 8 6 5 220pF(221) 3, 5 8 8 6 270pF(271) 3, 5 8 8 6 330pF(331) 3, 5 8 8 6 390pF(391) 3, 5 8 8 6 470pF(471) 3, 5 8 8 6 560pF(561) 3, 5 8 8 6 680pF(681) 3, 5 8 8 6 820pF(821) 5 8 8 6 1000pF(102) 5 8 8 6 1200pF(122) 8 8 6 6 1500pF(152) 8 8 5 8 5 8 8 6 6 1800pF(182) 8 6 6 9 5 8 2200pF(222) 8 6 6 9 5 5, 8 2700pF(272) 8 6 6 9 5 5, 8 3300pF(332) 8 6 6 9 5 5, 8 3900pF(392) 8 6 9 4700pF(472) 6 9 9 5600pF(562) 9 9 9 8 5 6800pF(682) 9 9 9 8 5 8200pF(822) 9 9 9 8 5 10000pF(103) 9 9 9 8 5 6 12000pF(123) 9 9 8 6 15000pF(153) 9 9 8 6 18000pF(183) B 9 8 6 22000pF(223) B 9 8 9 5 5, 8 5 5, 8 27000pF(273) 9 9 33000pF(333) 9 A 39000pF(393) 9 B 47000pF(473) M B 56000pF(563) M 9 9 68000pF(683) C B M 82000pF(823) C B M 0.1F(104) C B M The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code Continued on the following page. 11 1 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 1 Capacitance Table Continued from the preceding page. Temperature Compensating Type P2H(6P),R2H(6R),S2H(6S),T2H(6T) Characteristics 6 ex.6: T Dimension [mm] TC P2H (6P) R2H (6R) S2H (6S) T2H (6T) LxW 1.0x0.5 0.6x0.3 1.0x0.5 0.6x0.3 1.0x0.5 0.6x0.3 1.0x0.5 (15) (03) (15) (03) (15) (03) (15) [mm] <0402> <0201> <0402> <0201> <0402> <0201> <0402> Rated Voltage 50 25 50 25 50 25 50 [Vdc] (1H) (1E) (1H) (1E) (1H) (1E) (1H) Capacitance 1.0pF(1R0) 5 3 5 3 5 3 5 2.0pF(2R0) 5 3 5 3 5 3 5 3.0pF(3R0) 5 3 5 3 5 3 5 4.0pF(4R0) 5 3 5 3 5 3 5 5.0pF(5R0) 5 3 5 3 5 3 5 6.0pF(6R0) 5 3 5 3 5 3 5 7.0pF(7R0) 5 3 5 3 5 3 5 8.0pF(8R0) 5 3 5 3 5 3 5 9.0pF(9R0) 5 3 5 3 5 3 5 10pF(100) 5 3 5 3 5 3 5 12pF(120) 5 3 5 3 5 3 5 15pF(150) 5 3 5 3 5 3 5 18pF(180) 5 3 5 3 5 3 5 22pF(220) 5 3 5 3 5 3 5 27pF(270) 5 3 5 3 5 3 5 33pF(330) 3 5 3 5 3 5 39pF(390) 3 3 5 3 5 47pF(470) 3 3 3 5 56pF(560) 3 3 3 5 68pF(680) 3 3 3 5 5 82pF(820) 3 3 3 100pF(101) 3 3 3 The part number code is shown in ( ) and Unit is shown in [ ]. 5 < >: EIA [inch] Code Continued on the following page. 12 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Capacitance Table Continued from the preceding page. High Dielectric Constant Type X7R(R7)/X7S(C7)/X7T(D7)/X7U(E7) Characteristics 5 ex.5: T Dimension [mm] LxW 0.4x0.2 (02) [mm] <01005> 0.6x0.3 (03) <0201> 1.0x0.5 (15) <0402> 1.6x0.8 (18) <0603> 2.0x1.25 (21) <0805> Rated Voltage 10 25 16 10 100 50 25 16 10 100 50 25 16 10 6.3 4 100 50 25 16 10 6.3 4 [Vdc] (1A) (1E) (1C) (1A) (2A) (1H) (1E) (1C) (1A) (2A) (1H) (1E) (1C) (1A) (0J) (0G) (2A) (1H) (1E) (1C) (1A) (0J) (0G) Capacitance 68pF(680) 100pF(101) 150pF(151) 220pF(221) 330pF(331) 470pF(471) 680pF(681) 1000pF(102) 1500pF(152) 2200pF(222) 3300pF(332) 4700pF(472) 6800pF(682) 10000pF(103) 15000pF(153) 22000pF(223) 33000pF(333) 47000pF(473) 68000pF(683) 0.10F(104) 0.15F(154) 0.22F(224) 0.33F(334) 0.47F(474) 0.68F(684) 1.0F(105) 2.2F(225) 4.7F(475) 10F(106) 22F(226) 2 2 3 2 3 2 3 5 X, 5 8 8 2 3 5 X, 5 8 8 2 3 5 X, 5 8 8 3 5 X, 5 8 8 3 5 X, 5 8 8 3 5 X, 5 8 8 3 5 5 8 8 3 5 5 X 8 8 5 5 5 X 8 8 3 5 5 X 8 8 3 5 5 X 8 8 8 B 5 5 5 8 8 B 5 5 5 8 8 B 5 5 8 8 B 9 5 5 8 8 B B 8 8 B 9 8 8 B B 3 X 5 5 5 5 8 9 8 8 8 8 8 B B A B B 8 8 A 9 B 8 8 B B 9 9 9 B 9, B B B B B B B 8 8 8 5, 8 8 8 8 B B B 3.2x1.6 (31) <1206> LxW [mm] 3.2x2.5 (32) <1210> Rated Voltage 100 50 25 16 10 6.3 4 100 50 35 25 16 10 6.3 [Vdc] (2A) (1H) (1E) (1C) (1A) (0J) (0G) (2A) (1H) (YA) (1E) (1C) (1A) (0J) Capacitance 15000pF(153) 22000pF(223) 33000pF(333) 47000pF(473) 68000pF(683) 0.10F(104) 0.15F(154) 0.22F(224) 0.33F(334) 0.47F(474) 0.68F(684) 1.0F(105) 2.2F(225) 4.7F(475) 10F(106) 22F(226) 47F(476) 9 M M M M 9 M M M M M M M M C C M C 9 C M M C C C C C N E E E C C C The part number code is shown in ( ) and Unit is shown in [ ]. D E C E E E < >: EIA [inch] Code Continued on the following page. 13 1 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 1 Capacitance Table Continued from the preceding page. High Dielectric Constant Type X6S(C8)/X6T(D8) Characteristics 5 ex.5: T Dimension [mm] LxW 0.6x0.3 (03) [mm] <0201> 1.0x0.5 (15) <0402> 1.6x0.8 (18) <0603> 2.0x1.25 (21) <0805> 3.2x1.6 (31) <1206> 3.2x2.5 (32) <1210> Rated Voltage 6.3 25 6.3 4 10 6.3 4 2.5 25 16 10 6.3 4 25 16 10 6.3 4 25 10 6.3 [Vdc] (0J) (1E) (0J) (0G) (1A) (0J) (0G) (0E) (1E) (1C) (1A) (0J) (0G) (1E) (1C) (1A) (0J) (0G) (1E) (1A) (0J) Capacitance 15000pF(153) 3 22000pF(223) 3 33000pF(333) 3 47000pF(473) 3 68000pF(683) 5 0.10F(104) 5 0.15F(154) 5 5 0.22F(224) 5 5 0.33F(334) 5 5 0.47F(474) 5 5 0.68F(684) 5 1.0F(105) 5 5 2.2F(225) 8 8 4.7F(475) 10F(106) 8 6 B 8 22F(226) B 9 9 B 9, B 9 9 B 47F(476) D C C E C C 100F(107) The part number code is shown in ( ) and Unit is shown in [ ]. 6 9 8 C E E C < >: EIA [inch] Code Continued on the following page. 14 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Capacitance Table Continued from the preceding page. High Dielectric Constant Type X5R(R6) Characteristics 5 ex.5: T Dimension [mm] LxW 0.4x0.2 (02) [mm] <01005> : Please refer to X7R(R7) etc Characteristics. 0.6x0.3 (03) <0201> 1.0x0.5 (15) <0402> 1.6x0.8 (18) <0603> Rated Voltage 10 6.3 25 16 10 6.3 100 50 25 16 10 6.3 4 100 50 25 16 10 6.3 4 [Vdc] (1A) (0J) (1E) (1C) (1A) (0J) (2A) (1H) (1E) (1C) (1A) (0J) (0G) (2A) (1H) (1E) (1C) (1A) (0J) (0G) Capacitance 68pF(680) 100pF(101) 150pF(151) 220pF(221) 330pF(331) 470pF(471) 680pF(681) 1000pF(102) 1500pF(152) 2200pF(222) 3300pF(332) 4700pF(472) 6800pF(682) 10000pF(103) 15000pF(153) 22000pF(223) 33000pF(333) 47000pF(473) 68000pF(683) 0.10F(104) 0.15F(154) 0.22F(224) 0.33F(334) 0.47F(474) 0.68F(684) 1.0F(105) 2.2F(225) 4.7F(475) 10F(106) 2 2 2 2 2 2 2 2 2 3 2 3 2 3 2 3 2 3 2 3 5 8 5 8 5 8 8 3 8 3 5 3 5 5 5 5 5 5 5 5 5 5 3 5 5 5 5 5 5 5 5 5 5 8 8 8 8 8 8 8 8 8 5, 8 5 8 8 8 5 5 8 8 2.0x1.25 (21) <0805> LxW [mm] 3.2x1.6 (31) <1206> 8 3.2x2.5 (32) <1210> Rated Voltage 100 50 25 16 10 6.3 4 100 50 25 16 10 6.3 4 100 50 35 25 16 10 6.3 [Vdc] (2A) (1H) (1E) (1C) (1A) (0J) (0G) (2A) (1H) (1E) (1C) (1A) (0J) (0G) (2A) (1H) (YA) (1E) (1C) (1A) (0J) Capacitance 6800pF(682) 10000pF(103) 15000pF(153) 22000pF(223) 33000pF(333) 47000pF(473) 68000pF(683) 0.10F(104) 0.15F(154) 0.22F(224) 0.33F(334) 0.47F(474) 0.68F(684) 1.0F(105) 2.2F(225) 4.7F(475) 10F(106) 22F(226) 47F(476) 100F(107) B B 6 B 9, B 9, B B 9, B 9 B 9, B B C 6 9,C 9,C C 9 B The part number code is shown in ( ) and Unit is shown in [ ]. 9 9, C 9 C C E E C C D E C E C < >: EIA [inch] Code 15 1 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 1 Temperature Compensating Type C0G(5C) Characteristics LxW [mm] 0.4x0.2(02)<01005> 0.6x0.3(03)<0201> 1.0x0.5(15)<0402> 16(1C) 50(1H) 50(1H) Rated Volt. [Vdc] Capacitance Tolerance Part Number 0.1pF(R10) 0.05pF(W) 0.2pF(R20) 0.05pF(W) 0.1pF(B) GRM0225C1CR20BD05L GRM0335C1HR20BD01D GRM1555C1HR20BA01D 0.3pF(R30) 0.05pF(W) GRM0225C1CR30WD05L GRM0335C1HR30WD01D GRM1555C1HR30WA01D 0.1pF(B) GRM0225C1CR30BD05L GRM0335C1HR30BD01D GRM1555C1HR30BA01D 0.4pF(R40) 0.05pF(W) GRM0225C1CR40WD05L GRM0335C1HR40WD01D GRM1555C1HR40WA01D 0.1pF(B) GRM0225C1CR40BD05L GRM0335C1HR40BD01D GRM1555C1HR40BA01D 0.5pF(R50) 0.05pF(W) GRM0225C1CR50WD05L GRM0335C1HR50WD01D GRM1555C1HR50WA01D 0.1pF(B) GRM0225C1CR50BD05L GRM0335C1HR50BD01D GRM1555C1HR50BA01D 0.6pF(R60) 0.05pF(W) GRM0225C1CR60WD05L GRM0335C1HR60WD01D GRM1555C1HR60WA01D 0.1pF(B) GRM0225C1CR60BD05L GRM0335C1HR60BD01D GRM1555C1HR60BA01D 0.7pF(R70) 0.05pF(W) GRM0225C1CR70WD05L GRM0335C1HR70WD01D GRM1555C1HR70WA01D 0.1pF(B) GRM0225C1CR70BD05L GRM0335C1HR70BD01D GRM1555C1HR70BA01D 0.8pF(R80) 0.05pF(W) GRM0225C1CR80WD05L GRM0335C1HR80WD01D GRM1555C1HR80WA01D 0.1pF(B) GRM0225C1CR80BD05L GRM0335C1HR80BD01D GRM1555C1HR80BA01D 0.05pF(W) GRM0225C1CR90WD05L GRM0335C1HR90WD01D GRM1555C1HR90WA01D 0.1pF(B) GRM0225C1CR90BD05L GRM0335C1HR90BD01D GRM1555C1HR90BA01D 0.05pF(W) GRM0225C1C1R0WD05L GRM0335C1H1R0WD01D GRM1555C1H1R0WA01D GRM1555C1H1R0BA01D GRM0335C1HR10WD01D 0.1pF(B) 0.9pF(R90) 1.0pF(1R0) 1.1pF(1R1) 1.2pF(1R2) 1.3pF(1R3) 1.4pF(1R4) 1.5pF(1R5) 1.6pF(1R6) 1.7pF(1R7) 1.8pF(1R8) 1.9pF(1R9) 2.0pF(2R0) GRM0225C1CR20WD05L GRM1555C1HR10WA01D GRM0335C1HR10BD01D GRM1555C1HR10BA01D GRM0335C1HR20WD01D GRM1555C1HR20WA01D 0.1pF(B) GRM0225C1C1R0BD05L GRM0335C1H1R0BD01D 0.25pF(C) GRM0225C1C1R0CD05L GRM0335C1H1R0CD01D GRM1555C1H1R0CA01D 0.05pF(W) GRM0225C1C1R1WD05L GRM0335C1H1R1WD01D GRM1555C1H1R1WA01D GRM1555C1H1R1BA01D 0.1pF(B) GRM0225C1C1R1BD05L GRM0335C1H1R1BD01D 0.25pF(C) GRM0225C1C1R1CD05L GRM0335C1H1R1CD01D GRM1555C1H1R1CA01D 0.05pF(W) GRM0225C1C1R2WD05L GRM0335C1H1R2WD01D GRM1555C1H1R2WA01D GRM1555C1H1R2BA01D 0.1pF(B) GRM0225C1C1R2BD05L GRM0335C1H1R2BD01D 0.25pF(C) GRM0225C1C1R2CD05L GRM0335C1H1R2CD01D GRM1555C1H1R2CA01D 0.05pF(W) GRM0225C1C1R3WD05L GRM0335C1H1R3WD01D GRM1555C1H1R3WA01D GRM1555C1H1R3BA01D 0.1pF(B) GRM0225C1C1R3BD05L GRM0335C1H1R3BD01D 0.25pF(C) GRM0225C1C1R3CD05L GRM0335C1H1R3CD01D GRM1555C1H1R3CA01D 0.05pF(W) GRM0225C1C1R4WD05L GRM0335C1H1R4WD01D GRM1555C1H1R4WA01D 0.1pF(B) GRM0225C1C1R4BD05L GRM0335C1H1R4BD01D GRM1555C1H1R4BA01D 0.25pF(C) GRM0225C1C1R4CD05L GRM0335C1H1R4CD01D GRM1555C1H1R4CA01D 0.05pF(W) GRM0225C1C1R5WD05L GRM0335C1H1R5WD01D GRM1555C1H1R5WA01D GRM1555C1H1R5BA01D 0.1pF(B) GRM0225C1C1R5BD05L GRM0335C1H1R5BD01D 0.25pF(C) GRM0225C1C1R5CD05L GRM0335C1H1R5CD01D GRM1555C1H1R5CA01D 0.05pF(W) GRM0225C1C1R6WD05L GRM0335C1H1R6WD01D GRM1555C1H1R6WA01D GRM1555C1H1R6BA01D 0.1pF(B) GRM0225C1C1R6BD05L GRM0335C1H1R6BD01D 0.25pF(C) GRM0225C1C1R6CD05L GRM0335C1H1R6CD01D GRM1555C1H1R6CA01D 0.05pF(W) GRM0225C1C1R7WD05L GRM0335C1H1R7WD01D GRM1555C1H1R7WA01D GRM1555C1H1R7BA01D 0.1pF(B) GRM0225C1C1R7BD05L GRM0335C1H1R7BD01D 0.25pF(C) GRM0225C1C1R7CD05L GRM0335C1H1R7CD01D GRM1555C1H1R7CA01D 0.05pF(W) GRM0225C1C1R8WD05L GRM0335C1H1R8WD01D GRM1555C1H1R8WA01D GRM1555C1H1R8BA01D 0.1pF(B) GRM0225C1C1R8BD05L GRM0335C1H1R8BD01D 0.25pF(C) GRM0225C1C1R8CD05L GRM0335C1H1R8CD01D GRM1555C1H1R8CA01D 0.05pF(W) GRM0225C1C1R9WD05L GRM0335C1H1R9WD01D GRM1555C1H1R9WA01D 0.1pF(B) GRM0225C1C1R9BD05L GRM0335C1H1R9BD01D GRM1555C1H1R9BA01D 0.25pF(C) GRM0225C1C1R9CD05L GRM0335C1H1R9CD01D GRM1555C1H1R9CA01D 0.05pF(W) GRM0225C1C2R0WD05L GRM0335C1H2R0WD01D GRM1555C1H2R0WA01D 0.1pF(B) GRM0225C1C2R0BD05L GRM0335C1H2R0BD01D GRM1555C1H2R0BA01D 0.25pF(C) GRM0225C1C2R0CD05L GRM0335C1H2R0CD01D GRM1555C1H2R0CA01D The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code qProduct ID wSeries tTemperature Characteristics u i o !0 iCapacitance Tolerance q w e r t y Packaging Code in Part Number is a code shows STD 180mm Reel Taping. (Part Number) GR 16 M 02 2 5C 1C R20 W D05 L eDimension (LxW) rDimension (T) yRated Voltage uCapacitance oIndividual Specification Code !0Packaging* *GRM022: D is applicable. PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 1 Temperature Compensating Type C0G(5C) Characteristics LxW [mm] Rated Volt. [Vdc] Capacitance 2.1pF(2R1) 2.2pF(2R2) 2.3pF(2R3) 2.4pF(2R4) 2.5pF(2R5) 2.6pF(2R6) 2.7pF(2R7) 2.8pF(2R8) 2.9pF(2R9) 3.0pF(3R0) 3.1pF(3R1) 3.2pF(3R2) 3.3pF(3R3) 3.4pF(3R4) 3.5pF(3R5) 3.6pF(3R6) 3.7pF(3R7) 0.4x0.2(02)<01005> 0.6x0.3(03)<0201> 1.0x0.5(15)<0402> 16(1C) 50(1H) 50(1H) Tolerance Part Number 0.05pF(W) GRM0225C1C2R1WD05L GRM0335C1H2R1WD01D GRM1555C1H2R1WA01D 0.1pF(B) GRM0225C1C2R1BD05L GRM0335C1H2R1BD01D GRM1555C1H2R1BA01D 0.25pF(C) GRM0225C1C2R1CD05L GRM0335C1H2R1CD01D GRM1555C1H2R1CA01D 0.05pF(W) GRM0225C1C2R2WD05L GRM0335C1H2R2WD01D GRM1555C1H2R2WA01D 0.1pF(B) GRM0225C1C2R2BD05L GRM0335C1H2R2BD01D GRM1555C1H2R2BA01D 0.25pF(C) GRM0225C1C2R2CD05L GRM0335C1H2R2CD01D GRM1555C1H2R2CA01D 0.05pF(W) GRM0225C1C2R3WD05L GRM0335C1H2R3WD01D GRM1555C1H2R3WA01D GRM1555C1H2R3BA01D 0.1pF(B) GRM0225C1C2R3BD05L GRM0335C1H2R3BD01D 0.25pF(C) GRM0225C1C2R3CD05L GRM0335C1H2R3CD01D GRM1555C1H2R3CA01D 0.05pF(W) GRM0225C1C2R4WD05L GRM0335C1H2R4WD01D GRM1555C1H2R4WA01D GRM1555C1H2R4BA01D 0.1pF(B) GRM0225C1C2R4BD05L GRM0335C1H2R4BD01D 0.25pF(C) GRM0225C1C2R4CD05L GRM0335C1H2R4CD01D GRM1555C1H2R4CA01D 0.05pF(W) GRM0225C1C2R5WD05L GRM0335C1H2R5WD01D GRM1555C1H2R5WA01D GRM1555C1H2R5BA01D 0.1pF(B) GRM0225C1C2R5BD05L GRM0335C1H2R5BD01D 0.25pF(C) GRM0225C1C2R5CD05L GRM0335C1H2R5CD01D GRM1555C1H2R5CA01D 0.05pF(W) GRM0225C1C2R6WD05L GRM0335C1H2R6WD01D GRM1555C1H2R6WA01D GRM1555C1H2R6BA01D 0.1pF(B) GRM0225C1C2R6BD05L GRM0335C1H2R6BD01D 0.25pF(C) GRM0225C1C2R6CD05L GRM0335C1H2R6CD01D GRM1555C1H2R6CA01D 0.05pF(W) GRM0225C1C2R7WD05L GRM0335C1H2R7WD01D GRM1555C1H2R7WA01D 0.1pF(B) GRM0225C1C2R7BD05L GRM0335C1H2R7BD01D GRM1555C1H2R7BA01D 0.25pF(C) GRM0225C1C2R7CD05L GRM0335C1H2R7CD01D GRM1555C1H2R7CA01D 0.05pF(W) GRM0225C1C2R8WD05L GRM0335C1H2R8WD01D GRM1555C1H2R8WA01D 0.1pF(B) GRM0225C1C2R8BD05L GRM0335C1H2R8BD01D GRM1555C1H2R8BA01D 0.25pF(C) GRM0225C1C2R8CD05L GRM0335C1H2R8CD01D GRM1555C1H2R8CA01D 0.05pF(W) GRM0225C1C2R9WD05L GRM0335C1H2R9WD01D GRM1555C1H2R9WA01D 0.1pF(B) GRM0225C1C2R9BD05L GRM0335C1H2R9BD01D GRM1555C1H2R9BA01D 0.25pF(C) GRM0225C1C2R9CD05L GRM0335C1H2R9CD01D GRM1555C1H2R9CA01D 0.05pF(W) GRM0225C1C3R0WD05L GRM0335C1H3R0WD01D GRM1555C1H3R0WA01D GRM1555C1H3R0BA01D 0.1pF(B) GRM0225C1C3R0BD05L GRM0335C1H3R0BD01D 0.25pF(C) GRM0225C1C3R0CD05L GRM0335C1H3R0CD01D GRM1555C1H3R0CA01D 0.05pF(W) GRM0225C1C3R1WD05L GRM0335C1H3R1WD01D GRM1555C1H3R1WA01D 0.1pF(B) GRM0225C1C3R1BD05L GRM0335C1H3R1BD01D GRM1555C1H3R1BA01D 0.25pF(C) GRM0225C1C3R1CD05L GRM0335C1H3R1CD01D GRM1555C1H3R1CA01D 0.05pF(W) GRM0225C1C3R2WD05L GRM0335C1H3R2WD01D GRM1555C1H3R2WA01D GRM1555C1H3R2BA01D 0.1pF(B) GRM0225C1C3R2BD05L GRM0335C1H3R2BD01D 0.25pF(C) GRM0225C1C3R2CD05L GRM0335C1H3R2CD01D GRM1555C1H3R2CA01D 0.05pF(W) GRM0225C1C3R3WD05L GRM0335C1H3R3WD01D GRM1555C1H3R3WA01D GRM1555C1H3R3BA01D 0.1pF(B) GRM0225C1C3R3BD05L GRM0335C1H3R3BD01D 0.25pF(C) GRM0225C1C3R3CD05L GRM0335C1H3R3CD01D GRM1555C1H3R3CA01D 0.05pF(W) GRM0225C1C3R4WD05L GRM0335C1H3R4WD01D GRM1555C1H3R4WA01D 0.1pF(B) GRM0225C1C3R4BD05L GRM0335C1H3R4BD01D GRM1555C1H3R4BA01D 0.25pF(C) GRM0225C1C3R4CD05L GRM0335C1H3R4CD01D GRM1555C1H3R4CA01D 0.05pF(W) GRM0225C1C3R5WD05L GRM0335C1H3R5WD01D GRM1555C1H3R5WA01D 0.1pF(B) GRM0225C1C3R5BD05L GRM0335C1H3R5BD01D GRM1555C1H3R5BA01D 0.25pF(C) GRM0225C1C3R5CD05L GRM0335C1H3R5CD01D GRM1555C1H3R5CA01D 0.05pF(W) GRM0225C1C3R6WD05L GRM0335C1H3R6WD01D GRM1555C1H3R6WA01D 0.1pF(B) GRM0225C1C3R6BD05L GRM0335C1H3R6BD01D GRM1555C1H3R6BA01D 0.25pF(C) GRM0225C1C3R6CD05L GRM0335C1H3R6CD01D GRM1555C1H3R6CA01D 0.05pF(W) GRM0225C1C3R7WD05L GRM0335C1H3R7WD01D GRM1555C1H3R7WA01D 0.1pF(B) GRM0225C1C3R7BD05L GRM0335C1H3R7BD01D GRM1555C1H3R7BA01D 0.25pF(C) GRM0225C1C3R7CD05L GRM0335C1H3R7CD01D GRM1555C1H3R7CA01D The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code 17 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 1 Temperature Compensating Type C0G(5C) Characteristics LxW [mm] 0.4x0.2(02)<01005> 0.6x0.3(03)<0201> 1.0x0.5(15)<0402> 16(1C) 50(1H) 50(1H) Rated Volt. [Vdc] Capacitance Tolerance 3.8pF(3R8) 3.9pF(3R9) 4.0pF(4R0) 4.1pF(4R1) 4.2pF(4R2) 4.3pF(4R3) 4.4pF(4R4) 4.5pF(4R5) 4.6pF(4R6) 4.7pF(4R7) 4.8pF(4R8) 4.9pF(4R9) 5.0pF(5R0) 5.1pF(5R1) 5.2pF(5R2) Part Number 0.05pF(W) GRM0225C1C3R8WD05L GRM0335C1H3R8WD01D GRM1555C1H3R8WA01D 0.1pF(B) GRM0225C1C3R8BD05L GRM0335C1H3R8BD01D GRM1555C1H3R8BA01D 0.25pF(C) GRM0225C1C3R8CD05L GRM0335C1H3R8CD01D GRM1555C1H3R8CA01D 0.05pF(W) GRM0225C1C3R9WD05L GRM0335C1H3R9WD01D GRM1555C1H3R9WA01D 0.1pF(B) GRM0225C1C3R9BD05L GRM0335C1H3R9BD01D GRM1555C1H3R9BA01D 0.25pF(C) GRM0225C1C3R9CD05L GRM0335C1H3R9CD01D GRM1555C1H3R9CA01D 0.05pF(W) GRM0225C1C4R0WD05L GRM0335C1H4R0WD01D GRM1555C1H4R0WA01D GRM1555C1H4R0BA01D 0.1pF(B) GRM0225C1C4R0BD05L GRM0335C1H4R0BD01D 0.25pF(C) GRM0225C1C4R0CD05L GRM0335C1H4R0CD01D GRM1555C1H4R0CA01D 0.05pF(W) GRM0225C1C4R1WD05L GRM0335C1H4R1WD01D GRM1555C1H4R1WA01D GRM1555C1H4R1BA01D 0.1pF(B) GRM0225C1C4R1BD05L GRM0335C1H4R1BD01D 0.25pF(C) GRM0225C1C4R1CD05L GRM0335C1H4R1CD01D GRM1555C1H4R1CA01D 0.05pF(W) GRM0225C1C4R2WD05L GRM0335C1H4R2WD01D GRM1555C1H4R2WA01D GRM1555C1H4R2BA01D 0.1pF(B) GRM0225C1C4R2BD05L GRM0335C1H4R2BD01D 0.25pF(C) GRM0225C1C4R2CD05L GRM0335C1H4R2CD01D GRM1555C1H4R2CA01D 0.05pF(W) GRM0225C1C4R3WD05L GRM0335C1H4R3WD01D GRM1555C1H4R3WA01D GRM1555C1H4R3BA01D 0.1pF(B) GRM0225C1C4R3BD05L GRM0335C1H4R3BD01D 0.25pF(C) GRM0225C1C4R3CD05L GRM0335C1H4R3CD01D GRM1555C1H4R3CA01D 0.05pF(W) GRM0225C1C4R4WD05L GRM0335C1H4R4WD01D GRM1555C1H4R4WA01D 0.1pF(B) GRM0225C1C4R4BD05L GRM0335C1H4R4BD01D GRM1555C1H4R4BA01D 0.25pF(C) GRM0225C1C4R4CD05L GRM0335C1H4R4CD01D GRM1555C1H4R4CA01D 0.05pF(W) GRM0225C1C4R5WD05L GRM0335C1H4R5WD01D GRM1555C1H4R5WA01D 0.1pF(B) GRM0225C1C4R5BD05L GRM0335C1H4R5BD01D GRM1555C1H4R5BA01D 0.25pF(C) GRM0225C1C4R5CD05L GRM0335C1H4R5CD01D GRM1555C1H4R5CA01D 0.05pF(W) GRM0225C1C4R6WD05L GRM0335C1H4R6WD01D GRM1555C1H4R6WA01D 0.1pF(B) GRM0225C1C4R6BD05L GRM0335C1H4R6BD01D GRM1555C1H4R6BA01D 0.25pF(C) GRM0225C1C4R6CD05L GRM0335C1H4R6CD01D GRM1555C1H4R6CA01D 0.05pF(W) GRM0225C1C4R7WD05L GRM0335C1H4R7WD01D GRM1555C1H4R7WA01D GRM1555C1H4R7BA01D 0.1pF(B) GRM0225C1C4R7BD05L GRM0335C1H4R7BD01D 0.25pF(C) GRM0225C1C4R7CD05L GRM0335C1H4R7CD01D GRM1555C1H4R7CA01D 0.05pF(W) GRM0225C1C4R8WD05L GRM0335C1H4R8WD01D GRM1555C1H4R8WA01D 0.1pF(B) GRM0225C1C4R8BD05L GRM0335C1H4R8BD01D GRM1555C1H4R8BA01D 0.25pF(C) GRM0225C1C4R8CD05L GRM0335C1H4R8CD01D GRM1555C1H4R8CA01D 0.05pF(W) GRM0225C1C4R9WD05L GRM0335C1H4R9WD01D GRM1555C1H4R9WA01D GRM1555C1H4R9BA01D 0.1pF(B) GRM0225C1C4R9BD05L GRM0335C1H4R9BD01D 0.25pF(C) GRM0225C1C4R9CD05L GRM0335C1H4R9CD01D GRM1555C1H4R9CA01D 0.05pF(W) GRM0225C1C5R0WD05L GRM0335C1H5R0WD01D GRM1555C1H5R0WA01D GRM1555C1H5R0BA01D 0.1pF(B) GRM0225C1C5R0BD05L GRM0335C1H5R0BD01D 0.25pF(C) GRM0225C1C5R0CD05L GRM0335C1H5R0CD01D GRM1555C1H5R0CA01D 0.05pF(W) GRM0225C1C5R1WD05L GRM0335C1H5R1WD01D GRM1555C1H5R1WA01D 0.1pF(B) GRM0225C1C5R1BD05L GRM0335C1H5R1BD01D GRM1555C1H5R1BA01D 0.25pF(C) GRM0225C1C5R1CD05L GRM0335C1H5R1CD01D GRM1555C1H5R1CA01D 0.5pF(D) GRM0225C1C5R1DD05L GRM0335C1H5R1DD01D GRM1555C1H5R1DA01D 0.05pF(W) GRM0225C1C5R2WD05L GRM0335C1H5R2WD01D GRM1555C1H5R2WA01D 0.1pF(B) GRM0225C1C5R2BD05L GRM0335C1H5R2BD01D GRM1555C1H5R2BA01D 0.25pF(C) GRM0225C1C5R2CD05L GRM0335C1H5R2CD01D GRM1555C1H5R2CA01D 0.5pF(D) GRM0225C1C5R2DD05L GRM0335C1H5R2DD01D GRM1555C1H5R2DA01D The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code qProduct ID wSeries tTemperature Characteristics u i o !0 iCapacitance Tolerance q w e r t y Packaging Code in Part Number is a code shows STD 180mm Reel Taping. (Part Number) GR 18 M 02 2 5C 1C 3R8 W D05 L eDimension (LxW) rDimension (T) yRated Voltage uCapacitance oIndividual Specification Code !0Packaging* *GRM022: D is applicable. PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 1 Temperature Compensating Type C0G(5C) Characteristics LxW [mm] Rated Volt. [Vdc] Capacitance 5.3pF(5R3) 5.4pF(5R4) 5.5pF(5R5) 5.6pF(5R6) 5.7pF(5R7) 5.8pF(5R8) 5.9pF(5R9) 6.0pF(6R0) 6.1pF(6R1) 6.2pF(6R2) 6.3pF(6R3) 6.4pF(6R4) 6.5pF(6R5) 0.4x0.2(02)<01005> 0.6x0.3(03)<0201> 1.0x0.5(15)<0402> 16(1C) 50(1H) 50(1H) Tolerance Part Number 0.05pF(W) GRM0225C1C5R3WD05L GRM0335C1H5R3WD01D GRM1555C1H5R3WA01D 0.1pF(B) GRM0225C1C5R3BD05L GRM0335C1H5R3BD01D GRM1555C1H5R3BA01D 0.25pF(C) GRM0225C1C5R3CD05L GRM0335C1H5R3CD01D GRM1555C1H5R3CA01D 0.5pF(D) GRM0225C1C5R3DD05L GRM0335C1H5R3DD01D GRM1555C1H5R3DA01D 0.05pF(W) GRM0225C1C5R4WD05L GRM0335C1H5R4WD01D GRM1555C1H5R4WA01D 0.1pF(B) GRM0225C1C5R4BD05L GRM0335C1H5R4BD01D GRM1555C1H5R4BA01D 0.25pF(C) GRM0225C1C5R4CD05L GRM0335C1H5R4CD01D GRM1555C1H5R4CA01D 0.5pF(D) GRM0225C1C5R4DD05L GRM0335C1H5R4DD01D GRM1555C1H5R4DA01D 0.05pF(W) GRM0225C1C5R5WD05L GRM0335C1H5R5WD01D GRM1555C1H5R5WA01D 0.1pF(B) GRM0225C1C5R5BD05L GRM0335C1H5R5BD01D GRM1555C1H5R5BA01D 0.25pF(C) GRM0225C1C5R5CD05L GRM0335C1H5R5CD01D GRM1555C1H5R5CA01D 0.5pF(D) GRM0225C1C5R5DD05L GRM0335C1H5R5DD01D GRM1555C1H5R5DA01D 0.05pF(W) GRM0225C1C5R6WD05L GRM0335C1H5R6WD01D GRM1555C1H5R6WA01D 0.1pF(B) GRM0225C1C5R6BD05L GRM0335C1H5R6BD01D GRM1555C1H5R6BA01D 0.25pF(C) GRM0225C1C5R6CD05L GRM0335C1H5R6CD01D GRM1555C1H5R6CA01D 0.5pF(D) GRM0225C1C5R6DD05L GRM0335C1H5R6DD01D GRM1555C1H5R6DA01D 0.05pF(W) GRM0225C1C5R7WD05L GRM0335C1H5R7WD01D GRM1555C1H5R7WA01D 0.1pF(B) GRM0225C1C5R7BD05L GRM0335C1H5R7BD01D GRM1555C1H5R7BA01D 0.25pF(C) GRM0225C1C5R7CD05L GRM0335C1H5R7CD01D GRM1555C1H5R7CA01D 0.5pF(D) GRM0225C1C5R7DD05L GRM0335C1H5R7DD01D GRM1555C1H5R7DA01D 0.05pF(W) GRM0225C1C5R8WD05L GRM0335C1H5R8WD01D GRM1555C1H5R8WA01D 0.1pF(B) GRM0225C1C5R8BD05L GRM0335C1H5R8BD01D GRM1555C1H5R8BA01D 0.25pF(C) GRM0225C1C5R8CD05L GRM0335C1H5R8CD01D GRM1555C1H5R8CA01D 0.5pF(D) GRM0225C1C5R8DD05L GRM0335C1H5R8DD01D GRM1555C1H5R8DA01D 0.05pF(W) GRM0225C1C5R9WD05L GRM0335C1H5R9WD01D GRM1555C1H5R9WA01D 0.1pF(B) GRM0225C1C5R9BD05L GRM0335C1H5R9BD01D GRM1555C1H5R9BA01D 0.25pF(C) GRM0225C1C5R9CD05L GRM0335C1H5R9CD01D GRM1555C1H5R9CA01D 0.5pF(D) GRM0225C1C5R9DD05L GRM0335C1H5R9DD01D GRM1555C1H5R9DA01D 0.05pF(W) GRM0225C1C6R0WD05L GRM0335C1H6R0WD01D GRM1555C1H6R0WA01D 0.1pF(B) GRM0225C1C6R0BD05L GRM0335C1H6R0BD01D GRM1555C1H6R0BA01D 0.25pF(C) GRM0225C1C6R0CD05L GRM0335C1H6R0CD01D GRM1555C1H6R0CA01D 0.5pF(D) GRM0225C1C6R0DD05L GRM0335C1H6R0DD01D GRM1555C1H6R0DA01D 0.05pF(W) GRM0225C1C6R1WD05L GRM0335C1H6R1WD01D GRM1555C1H6R1WA01D 0.1pF(B) GRM0225C1C6R1BD05L GRM0335C1H6R1BD01D GRM1555C1H6R1BA01D 0.25pF(C) GRM0225C1C6R1CD05L GRM0335C1H6R1CD01D GRM1555C1H6R1CA01D 0.5pF(D) GRM0225C1C6R1DD05L GRM0335C1H6R1DD01D GRM1555C1H6R1DA01D 0.05pF(W) GRM0225C1C6R2WD05L GRM0335C1H6R2WD01D GRM1555C1H6R2WA01D 0.1pF(B) GRM0225C1C6R2BD05L GRM0335C1H6R2BD01D GRM1555C1H6R2BA01D 0.25pF(C) GRM0225C1C6R2CD05L GRM0335C1H6R2CD01D GRM1555C1H6R2CA01D 0.5pF(D) GRM0225C1C6R2DD05L GRM0335C1H6R2DD01D GRM1555C1H6R2DA01D 0.05pF(W) GRM0225C1C6R3WD05L GRM0335C1H6R3WD01D GRM1555C1H6R3WA01D 0.1pF(B) GRM0225C1C6R3BD05L GRM0335C1H6R3BD01D GRM1555C1H6R3BA01D 0.25pF(C) GRM0225C1C6R3CD05L GRM0335C1H6R3CD01D GRM1555C1H6R3CA01D 0.5pF(D) GRM0225C1C6R3DD05L GRM0335C1H6R3DD01D GRM1555C1H6R3DA01D 0.05pF(W) GRM0225C1C6R4WD05L GRM0335C1H6R4WD01D GRM1555C1H6R4WA01D 0.1pF(B) GRM0225C1C6R4BD05L GRM0335C1H6R4BD01D GRM1555C1H6R4BA01D 0.25pF(C) GRM0225C1C6R4CD05L GRM0335C1H6R4CD01D GRM1555C1H6R4CA01D 0.5pF(D) GRM0225C1C6R4DD05L GRM0335C1H6R4DD01D GRM1555C1H6R4DA01D 0.05pF(W) GRM0225C1C6R5WD05L GRM0335C1H6R5WD01D GRM1555C1H6R5WA01D 0.1pF(B) GRM0225C1C6R5BD05L GRM0335C1H6R5BD01D GRM1555C1H6R5BA01D 0.25pF(C) GRM0225C1C6R5CD05L GRM0335C1H6R5CD01D GRM1555C1H6R5CA01D 0.5pF(D) GRM0225C1C6R5DD05L GRM0335C1H6R5DD01D GRM1555C1H6R5DA01D The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code 19 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 1 Temperature Compensating Type C0G(5C) Characteristics LxW [mm] 0.4x0.2(02)<01005> 0.6x0.3(03)<0201> 1.0x0.5(15)<0402> 16(1C) 50(1H) 50(1H) Rated Volt. [Vdc] Capacitance Tolerance 6.6pF(6R6) 6.7pF(6R7) 6.8pF(6R8) 6.9pF(6R9) 7.0pF(7R0) 7.1pF(7R1) 7.2pF(7R2) 7.3pF(7R3) 7.4pF(7R4) 7.5pF(7R5) 7.6pF(7R6) 7.7pF(7R7) Part Number 0.05pF(W) GRM0225C1C6R6WD05L GRM0335C1H6R6WD01D GRM1555C1H6R6WA01D 0.1pF(B) GRM0225C1C6R6BD05L GRM0335C1H6R6BD01D GRM1555C1H6R6BA01D 0.25pF(C) GRM0225C1C6R6CD05L GRM0335C1H6R6CD01D GRM1555C1H6R6CA01D 0.5pF(D) GRM0225C1C6R6DD05L GRM0335C1H6R6DD01D GRM1555C1H6R6DA01D 0.05pF(W) GRM0225C1C6R7WD05L GRM0335C1H6R7WD01D GRM1555C1H6R7WA01D 0.1pF(B) GRM0225C1C6R7BD05L GRM0335C1H6R7BD01D GRM1555C1H6R7BA01D 0.25pF(C) GRM0225C1C6R7CD05L GRM0335C1H6R7CD01D GRM1555C1H6R7CA01D 0.5pF(D) GRM0225C1C6R7DD05L GRM0335C1H6R7DD01D GRM1555C1H6R7DA01D 0.05pF(W) GRM0225C1C6R8WD05L GRM0335C1H6R8WD01D GRM1555C1H6R8WA01D 0.1pF(B) GRM0225C1C6R8BD05L GRM0335C1H6R8BD01D GRM1555C1H6R8BA01D 0.25pF(C) GRM0225C1C6R8CD05L GRM0335C1H6R8CD01D GRM1555C1H6R8CA01D 0.5pF(D) GRM0225C1C6R8DD05L GRM0335C1H6R8DD01D GRM1555C1H6R8DA01D 0.05pF(W) GRM0225C1C6R9WD05L GRM0335C1H6R9WD01D GRM1555C1H6R9WA01D 0.1pF(B) GRM0225C1C6R9BD05L GRM0335C1H6R9BD01D GRM1555C1H6R9BA01D 0.25pF(C) GRM0225C1C6R9CD05L GRM0335C1H6R9CD01D GRM1555C1H6R9CA01D 0.5pF(D) GRM0225C1C6R9DD05L GRM0335C1H6R9DD01D GRM1555C1H6R9DA01D 0.05pF(W) GRM0225C1C7R0WD05L GRM0335C1H7R0WD01D GRM1555C1H7R0WA01D 0.1pF(B) GRM0225C1C7R0BD05L GRM0335C1H7R0BD01D GRM1555C1H7R0BA01D 0.25pF(C) GRM0225C1C7R0CD05L GRM0335C1H7R0CD01D GRM1555C1H7R0CA01D 0.5pF(D) GRM0225C1C7R0DD05L GRM0335C1H7R0DD01D GRM1555C1H7R0DA01D 0.05pF(W) GRM0225C1C7R1WD05L GRM0335C1H7R1WD01D GRM1555C1H7R1WA01D 0.1pF(B) GRM0225C1C7R1BD05L GRM0335C1H7R1BD01D GRM1555C1H7R1BA01D 0.25pF(C) GRM0225C1C7R1CD05L GRM0335C1H7R1CD01D GRM1555C1H7R1CA01D 0.5pF(D) GRM0225C1C7R1DD05L GRM0335C1H7R1DD01D GRM1555C1H7R1DA01D 0.05pF(W) GRM0225C1C7R2WD05L GRM0335C1H7R2WD01D GRM1555C1H7R2WA01D 0.1pF(B) GRM0225C1C7R2BD05L GRM0335C1H7R2BD01D GRM1555C1H7R2BA01D 0.25pF(C) GRM0225C1C7R2CD05L GRM0335C1H7R2CD01D GRM1555C1H7R2CA01D 0.5pF(D) GRM0225C1C7R2DD05L GRM0335C1H7R2DD01D GRM1555C1H7R2DA01D 0.05pF(W) GRM0225C1C7R3WD05L GRM0335C1H7R3WD01D GRM1555C1H7R3WA01D 0.1pF(B) GRM0225C1C7R3BD05L GRM0335C1H7R3BD01D GRM1555C1H7R3BA01D 0.25pF(C) GRM0225C1C7R3CD05L GRM0335C1H7R3CD01D GRM1555C1H7R3CA01D 0.5pF(D) GRM0225C1C7R3DD05L GRM0335C1H7R3DD01D GRM1555C1H7R3DA01D 0.05pF(W) GRM0225C1C7R4WD05L GRM0335C1H7R4WD01D GRM1555C1H7R4WA01D 0.1pF(B) GRM0225C1C7R4BD05L GRM0335C1H7R4BD01D GRM1555C1H7R4BA01D 0.25pF(C) GRM0225C1C7R4CD05L GRM0335C1H7R4CD01D GRM1555C1H7R4CA01D 0.5pF(D) GRM0225C1C7R4DD05L GRM0335C1H7R4DD01D GRM1555C1H7R4DA01D 0.05pF(W) GRM0225C1C7R5WD05L GRM0335C1H7R5WD01D GRM1555C1H7R5WA01D 0.1pF(B) GRM0225C1C7R5BD05L GRM0335C1H7R5BD01D GRM1555C1H7R5BA01D 0.25pF(C) GRM0225C1C7R5CD05L GRM0335C1H7R5CD01D GRM1555C1H7R5CA01D 0.5pF(D) GRM0225C1C7R5DD05L GRM0335C1H7R5DD01D GRM1555C1H7R5DA01D 0.05pF(W) GRM0225C1C7R6WD05L GRM0335C1H7R6WD01D GRM1555C1H7R6WA01D 0.1pF(B) GRM0225C1C7R6BD05L GRM0335C1H7R6BD01D GRM1555C1H7R6BA01D 0.25pF(C) GRM0225C1C7R6CD05L GRM0335C1H7R6CD01D GRM1555C1H7R6CA01D 0.5pF(D) GRM0225C1C7R6DD05L GRM0335C1H7R6DD01D GRM1555C1H7R6DA01D 0.05pF(W) GRM0225C1C7R7WD05L GRM0335C1H7R7WD01D GRM1555C1H7R7WA01D 0.1pF(B) GRM0225C1C7R7BD05L GRM0335C1H7R7BD01D GRM1555C1H7R7BA01D 0.25pF(C) GRM0225C1C7R7CD05L GRM0335C1H7R7CD01D GRM1555C1H7R7CA01D 0.5pF(D) GRM0225C1C7R7DD05L GRM0335C1H7R7DD01D GRM1555C1H7R7DA01D The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code qProduct ID wSeries tTemperature Characteristics u i o !0 iCapacitance Tolerance q w e r t y Packaging Code in Part Number is a code shows STD 180mm Reel Taping. (Part Number) GR 20 M 02 2 5C 1C 6R6 W D05 L eDimension (LxW) rDimension (T) yRated Voltage uCapacitance oIndividual Specification Code !0Packaging* *GRM022: D is applicable. PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 1 Temperature Compensating Type C0G(5C) Characteristics LxW [mm] Rated Volt. [Vdc] Capacitance 7.8pF(7R8) 7.9pF(7R9) 8.0pF(8R0) 8.1pF(8R1) 8.2pF(8R2) 8.3pF(8R3) 8.4pF(8R4) 8.5pF(8R5) 8.6pF(8R6) 8.7pF(8R7) 8.8pF(8R8) 8.9pF(8R9) 9.0pF(9R0) 0.4x0.2(02)<01005> 0.6x0.3(03)<0201> 1.0x0.5(15)<0402> 16(1C) 50(1H) 50(1H) Tolerance Part Number 0.05pF(W) GRM0225C1C7R8WD05L GRM0335C1H7R8WD01D GRM1555C1H7R8WA01D 0.1pF(B) GRM0225C1C7R8BD05L GRM0335C1H7R8BD01D GRM1555C1H7R8BA01D 0.25pF(C) GRM0225C1C7R8CD05L GRM0335C1H7R8CD01D GRM1555C1H7R8CA01D 0.5pF(D) GRM0225C1C7R8DD05L GRM0335C1H7R8DD01D GRM1555C1H7R8DA01D 0.05pF(W) GRM0225C1C7R9WD05L GRM0335C1H7R9WD01D GRM1555C1H7R9WA01D 0.1pF(B) GRM0225C1C7R9BD05L GRM0335C1H7R9BD01D GRM1555C1H7R9BA01D 0.25pF(C) GRM0225C1C7R9CD05L GRM0335C1H7R9CD01D GRM1555C1H7R9CA01D 0.5pF(D) GRM0225C1C7R9DD05L GRM0335C1H7R9DD01D GRM1555C1H7R9DA01D 0.05pF(W) GRM0225C1C8R0WD05L GRM0335C1H8R0WD01D GRM1555C1H8R0WA01D 0.1pF(B) GRM0225C1C8R0BD05L GRM0335C1H8R0BD01D GRM1555C1H8R0BA01D 0.25pF(C) GRM0225C1C8R0CD05L GRM0335C1H8R0CD01D GRM1555C1H8R0CA01D 0.5pF(D) GRM0225C1C8R0DD05L GRM0335C1H8R0DD01D GRM1555C1H8R0DA01D 0.05pF(W) GRM0225C1C8R1WD05L GRM0335C1H8R1WD01D GRM1555C1H8R1WA01D 0.1pF(B) GRM0225C1C8R1BD05L GRM0335C1H8R1BD01D GRM1555C1H8R1BA01D 0.25pF(C) GRM0225C1C8R1CD05L GRM0335C1H8R1CD01D GRM1555C1H8R1CA01D 0.5pF(D) GRM0225C1C8R1DD05L GRM0335C1H8R1DD01D GRM1555C1H8R1DA01D 0.05pF(W) GRM0225C1C8R2WD05L GRM0335C1H8R2WD01D GRM1555C1H8R2WA01D 0.1pF(B) GRM0225C1C8R2BD05L GRM0335C1H8R2BD01D GRM1555C1H8R2BA01D 0.25pF(C) GRM0225C1C8R2CD05L GRM0335C1H8R2CD01D GRM1555C1H8R2CA01D 0.5pF(D) GRM0225C1C8R2DD05L GRM0335C1H8R2DD01D GRM1555C1H8R2DA01D 0.05pF(W) GRM0225C1C8R3WD05L GRM0335C1H8R3WD01D GRM1555C1H8R3WA01D 0.1pF(B) GRM0225C1C8R3BD05L GRM0335C1H8R3BD01D GRM1555C1H8R3BA01D 0.25pF(C) GRM0225C1C8R3CD05L GRM0335C1H8R3CD01D GRM1555C1H8R3CA01D 0.5pF(D) GRM0225C1C8R3DD05L GRM0335C1H8R3DD01D GRM1555C1H8R3DA01D 0.05pF(W) GRM0225C1C8R4WD05L GRM0335C1H8R4WD01D GRM1555C1H8R4WA01D 0.1pF(B) GRM0225C1C8R4BD05L GRM0335C1H8R4BD01D GRM1555C1H8R4BA01D 0.25pF(C) GRM0225C1C8R4CD05L GRM0335C1H8R4CD01D GRM1555C1H8R4CA01D 0.5pF(D) GRM0225C1C8R4DD05L GRM0335C1H8R4DD01D GRM1555C1H8R4DA01D 0.05pF(W) GRM0225C1C8R5WD05L GRM0335C1H8R5WD01D GRM1555C1H8R5WA01D 0.1pF(B) GRM0225C1C8R5BD05L GRM0335C1H8R5BD01D GRM1555C1H8R5BA01D 0.25pF(C) GRM0225C1C8R5CD05L GRM0335C1H8R5CD01D GRM1555C1H8R5CA01D 0.5pF(D) GRM0225C1C8R5DD05L GRM0335C1H8R5DD01D GRM1555C1H8R5DA01D 0.05pF(W) GRM0225C1C8R6WD05L GRM0335C1H8R6WD01D GRM1555C1H8R6WA01D 0.1pF(B) GRM0225C1C8R6BD05L GRM0335C1H8R6BD01D GRM1555C1H8R6BA01D 0.25pF(C) GRM0225C1C8R6CD05L GRM0335C1H8R6CD01D GRM1555C1H8R6CA01D 0.5pF(D) GRM0225C1C8R6DD05L GRM0335C1H8R6DD01D GRM1555C1H8R6DA01D 0.05pF(W) GRM0225C1C8R7WD05L GRM0335C1H8R7WD01D GRM1555C1H8R7WA01D 0.1pF(B) GRM0225C1C8R7BD05L GRM0335C1H8R7BD01D GRM1555C1H8R7BA01D 0.25pF(C) GRM0225C1C8R7CD05L GRM0335C1H8R7CD01D GRM1555C1H8R7CA01D 0.5pF(D) GRM0225C1C8R7DD05L GRM0335C1H8R7DD01D GRM1555C1H8R7DA01D 0.05pF(W) GRM0225C1C8R8WD05L GRM0335C1H8R8WD01D GRM1555C1H8R8WA01D 0.1pF(B) GRM0225C1C8R8BD05L GRM0335C1H8R8BD01D GRM1555C1H8R8BA01D 0.25pF(C) GRM0225C1C8R8CD05L GRM0335C1H8R8CD01D GRM1555C1H8R8CA01D 0.5pF(D) GRM0225C1C8R8DD05L GRM0335C1H8R8DD01D GRM1555C1H8R8DA01D 0.05pF(W) GRM0225C1C8R9WD05L GRM0335C1H8R9WD01D GRM1555C1H8R9WA01D 0.1pF(B) GRM0225C1C8R9BD05L GRM0335C1H8R9BD01D GRM1555C1H8R9BA01D 0.25pF(C) GRM0225C1C8R9CD05L GRM0335C1H8R9CD01D GRM1555C1H8R9CA01D 0.5pF(D) GRM0225C1C8R9DD05L GRM0335C1H8R9DD01D GRM1555C1H8R9DA01D 0.05pF(W) GRM0225C1C9R0WD05L GRM0335C1H9R0WD01D GRM1555C1H9R0WA01D 0.1pF(B) GRM0225C1C9R0BD05L GRM0335C1H9R0BD01D GRM1555C1H9R0BA01D 0.25pF(C) GRM0225C1C9R0CD05L GRM0335C1H9R0CD01D GRM1555C1H9R0CA01D 0.5pF(D) GRM0225C1C9R0DD05L GRM0335C1H9R0DD01D GRM1555C1H9R0DA01D The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code 21 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 1 Temperature Compensating Type C0G(5C) Characteristics LxW [mm] 0.4x0.2(02)<01005> 0.6x0.3(03)<0201> 1.0x0.5(15)<0402> 16(1C) 50(1H) 50(1H) Rated Volt. [Vdc] Capacitance Tolerance 9.1pF(9R1) 9.2pF(9R2) 9.3pF(9R3) 9.4pF(9R4) 9.5pF(9R5) 9.6pF(9R6) 9.7pF(9R7) 9.8pF(9R8) 9.9pF(9R9) Part Number 0.05pF(W) GRM0225C1C9R1WD05L GRM0335C1H9R1WD01D GRM1555C1H9R1WA01D 0.1pF(B) GRM0225C1C9R1BD05L GRM0335C1H9R1BD01D GRM1555C1H9R1BA01D 0.25pF(C) GRM0225C1C9R1CD05L GRM0335C1H9R1CD01D GRM1555C1H9R1CA01D 0.5pF(D) GRM0225C1C9R1DD05L GRM0335C1H9R1DD01D GRM1555C1H9R1DA01D 0.05pF(W) GRM0225C1C9R2WD05L GRM0335C1H9R2WD01D GRM1555C1H9R2WA01D 0.1pF(B) GRM0225C1C9R2BD05L GRM0335C1H9R2BD01D GRM1555C1H9R2BA01D 0.25pF(C) GRM0225C1C9R2CD05L GRM0335C1H9R2CD01D GRM1555C1H9R2CA01D 0.5pF(D) GRM0225C1C9R2DD05L GRM0335C1H9R2DD01D GRM1555C1H9R2DA01D 0.05pF(W) GRM0225C1C9R3WD05L GRM0335C1H9R3WD01D GRM1555C1H9R3WA01D 0.1pF(B) GRM0225C1C9R3BD05L GRM0335C1H9R3BD01D GRM1555C1H9R3BA01D 0.25pF(C) GRM0225C1C9R3CD05L GRM0335C1H9R3CD01D GRM1555C1H9R3CA01D 0.5pF(D) GRM0225C1C9R3DD05L GRM0335C1H9R3DD01D GRM1555C1H9R3DA01D 0.05pF(W) GRM0225C1C9R4WD05L GRM0335C1H9R4WD01D GRM1555C1H9R4WA01D 0.1pF(B) GRM0225C1C9R4BD05L GRM0335C1H9R4BD01D GRM1555C1H9R4BA01D 0.25pF(C) GRM0225C1C9R4CD05L GRM0335C1H9R4CD01D GRM1555C1H9R4CA01D 0.5pF(D) GRM0225C1C9R4DD05L GRM0335C1H9R4DD01D GRM1555C1H9R4DA01D 0.05pF(W) GRM0225C1C9R5WD05L GRM0335C1H9R5WD01D GRM1555C1H9R5WA01D 0.1pF(B) GRM0225C1C9R5BD05L GRM0335C1H9R5BD01D GRM1555C1H9R5BA01D 0.25pF(C) GRM0225C1C9R5CD05L GRM0335C1H9R5CD01D GRM1555C1H9R5CA01D 0.5pF(D) GRM0225C1C9R5DD05L GRM0335C1H9R5DD01D GRM1555C1H9R5DA01D 0.05pF(W) GRM0225C1C9R6WD05L GRM0335C1H9R6WD01D GRM1555C1H9R6WA01D 0.1pF(B) GRM0225C1C9R6BD05L GRM0335C1H9R6BD01D GRM1555C1H9R6BA01D 0.25pF(C) GRM0225C1C9R6CD05L GRM0335C1H9R6CD01D GRM1555C1H9R6CA01D 0.5pF(D) GRM0225C1C9R6DD05L GRM0335C1H9R6DD01D GRM1555C1H9R6DA01D 0.05pF(W) GRM0225C1C9R7WD05L GRM0335C1H9R7WD01D GRM1555C1H9R7WA01D 0.1pF(B) GRM0225C1C9R7BD05L GRM0335C1H9R7BD01D GRM1555C1H9R7BA01D 0.25pF(C) GRM0225C1C9R7CD05L GRM0335C1H9R7CD01D GRM1555C1H9R7CA01D 0.5pF(D) GRM0225C1C9R7DD05L GRM0335C1H9R7DD01D GRM1555C1H9R7DA01D 0.05pF(W) GRM0225C1C9R8WD05L GRM0335C1H9R8WD01D GRM1555C1H9R8WA01D 0.1pF(B) GRM0225C1C9R8BD05L GRM0335C1H9R8BD01D GRM1555C1H9R8BA01D 0.25pF(C) GRM0225C1C9R8CD05L GRM0335C1H9R8CD01D GRM1555C1H9R8CA01D 0.5pF(D) GRM0225C1C9R8DD05L GRM0335C1H9R8DD01D GRM1555C1H9R8DA01D 0.05pF(W) GRM0225C1C9R9WD05L GRM0335C1H9R9WD01D GRM1555C1H9R9WA01D 0.1pF(B) GRM0225C1C9R9BD05L GRM0335C1H9R9BD01D GRM1555C1H9R9BA01D 0.25pF(C) GRM0225C1C9R9CD05L GRM0335C1H9R9CD01D GRM1555C1H9R9CA01D 0.5pF(D) GRM0225C1C9R9DD05L GRM0335C1H9R9DD01D GRM1555C1H9R9DA01D The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code qProduct ID wSeries tTemperature Characteristics u i o !0 iCapacitance Tolerance q w e r t y Packaging Code in Part Number is a code shows STD 180mm Reel Taping. (Part Number) GR 22 M 02 2 5C 1C 9R1 W D05 L eDimension (LxW) rDimension (T) yRated Voltage uCapacitance oIndividual Specification Code !0Packaging* *GRM022: D is applicable. PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 1 Temperature Compensating Type C0G(5C) Characteristics 0.4x0.2(02)<01005> LxW [mm] 16(1C) Rated Volt. [Vdc] Capacitance 0.6x0.3(03)<0201> 10(1A) Tolerance 6.3(0J) 50(1H) Part Number 2%(G) GRM0225C1C100GD05L 5%(J) GRM0225C1C100JD05L GRM0335C1H100JD01D 12pF(120) 2%(G) GRM0225C1C120GD05L GRM0335C1H120GD01D 5%(J) GRM0225C1C120JD05L GRM0335C1H120JD01D 15pF(150) 2%(G) GRM0225C1C150GD05L GRM0335C1H150GD01D 5%(J) GRM0225C1C150JD05L GRM0335C1H150JD01D 18pF(180) 2%(G) GRM0225C1C180GD05L GRM0335C1H180GD01D 5%(J) GRM0225C1C180JD05L GRM0335C1H180JD01D 22pF(220) 2%(G) GRM0225C1C220GD05L GRM0335C1H220GD01D 5%(J) GRM0225C1C220JD05L GRM0335C1H220JD01D 2%(G) GRM0225C1C270GD05L GRM0335C1H270GD01D 5%(J) GRM0225C1C270JD05L GRM0335C1H270JD01D 33pF(330) 2%(G) GRM0225C1C330GD05L GRM0335C1H330GD01D 5%(J) GRM0225C1C330JD05L GRM0335C1H330JD01D 39pF(390) 2%(G) GRM0225C1C390GD05L GRM0335C1H390GD01D 5%(J) GRM0225C1C390JD05L GRM0335C1H390JD01D 2%(G) GRM0225C1C470GD05L GRM0335C1H470GD01D 5%(J) GRM0225C1C470JD05L 10pF(100) 27pF(270) 47pF(470) GRM0335C1H100GD01D GRM0335C1H470JD01D 56pF(560) 2%(G) 5%(J) GRM0225C1A560JD05L GRM0225C0J560JD05L GRM0335C1H560JD01D 68pF(680) 2%(G) GRM0225C1A680GD05L GRM0225C0J680GD05L GRM0335C1H680GD01D 5%(J) GRM0225C1A680JD05L GRM0225C0J680JD05L GRM0335C1H680JD01D 82pF(820) 2%(G) GRM0225C1A820GD05L GRM0225C0J820GD05L GRM0335C1H820GD01D 5%(J) GRM0225C1A820JD05L GRM0225C0J820JD05L GRM0335C1H820JD01D 100pF(101) 2%(G) GRM0225C1A101GD05L GRM0225C0J101GD05L GRM0335C1H101GD01D 5%(J) GRM0225C1A101JD05L GRM0225C0J101JD05L GRM0335C1H101JD01D The part number code is shown in ( ) and Unit is shown in [ ]. GRM0225C1A560GD05L GRM0225C0J560GD05L GRM0335C1H560GD01D < >: EIA [inch] Code 23 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 1 Temperature Compensating Type C0G(5C) Characteristics 1.0x0.5(15)<0402> LxW [mm] 50(1H) Rated Volt. [Vdc] C0G(5C) TC Capacitance Tolerance Part Number 10pF(100) 2%(G) 5%(J) GRM1555C1H100JA01D 12pF(120) 2%(G) GRM1555C1H120GA01D 5%(J) GRM1555C1H120JA01D 15pF(150) 2%(G) GRM1555C1H150GA01D 5%(J) GRM1555C1H150JA01D 18pF(180) 2%(G) GRM1555C1H180GA01D 5%(J) GRM1555C1H180JA01D 22pF(220) 2%(G) GRM1555C1H220GA01D 5%(J) GRM1555C1H220JA01D 27pF(270) 2%(G) GRM1555C1H270GA01D 5%(J) GRM1555C1H270JA01D 33pF(330) 2%(G) GRM1555C1H330GA01D GRM1555C1H100GA01D 5%(J) GRM1555C1H330JA01D 39pF(390) 2%(G) GRM1555C1H390GA01D 5%(J) GRM1555C1H390JA01D 47pF(470) 2%(G) GRM1555C1H470GA01D 5%(J) GRM1555C1H470JA01D 56pF(560) 2%(G) GRM1555C1H560GA01D 5%(J) GRM1555C1H560JA01D 68pF(680) 2%(G) GRM1555C1H680GA01D 5%(J) GRM1555C1H680JA01D 82pF(820) 2%(G) GRM1555C1H820GA01D 5%(J) GRM1555C1H820JA01D 100pF(101) 2%(G) GRM1555C1H101GA01D 5%(J) GRM1555C1H101JA01D 120pF(121) 2%(G) GRM1555C1H121GA01D 5%(J) GRM1555C1H121JA01D 150pF(151) 2%(G) GRM1555C1H151GA01D 5%(J) GRM1555C1H151JA01D 180pF(181) 2%(G) GRM1555C1H181GA01D 5%(J) GRM1555C1H181JA01D 220pF(221) 2%(G) GRM1555C1H221GA01D 5%(J) GRM1555C1H221JA01D 270pF(271) 2%(G) GRM1555C1H271GA01D 5%(J) GRM1555C1H271JA01D 330pF(331) 2%(G) GRM1555C1H331GA01D 5%(J) GRM1555C1H331JA01D 390pF(391) 2%(G) GRM1555C1H391GA01D 5%(J) GRM1555C1H391JA01D 470pF(471) 2%(G) GRM1555C1H471GA01D 5%(J) GRM1555C1H471JA01D 560pF(561) 2%(G) GRM1555C1H561GA01D 5%(J) GRM1555C1H561JA01D 2%(G) GRM1555C1H681GA01D 680pF(681) 5%(J) GRM1555C1H681JA01D 820pF(821) 2%(G) GRM1555C1H821GA01D 5%(J) GRM1555C1H821JA01D 1000pF(102) 2%(G) GRM1555C1H102GA01D 5%(J) GRM1555C1H102JA01D The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code qProduct ID wSeries tTemperature Characteristics u i o !0 iCapacitance Tolerance q w e r t y Packaging Code in Part Number is a code shows STD 180mm Reel Taping. (Part Number) GR 24 M 15 5 5C 1H 100 G Z01 D eDimension (LxW) yRated Voltage oIndividual Specification Code rDimension (T) uCapacitance !0Packaging PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 1 Temperature Compensating Type C0G(5C) Characteristics 1.6x0.8(18)<0603> LxW [mm] 100(2A) Rated Volt. [Vdc] Capacitance Tolerance 50(1H) Part Number 10pF(100) 5%(J) GRM1885C2A100JA01D GRM1885C1H100JA01D 12pF(120) 5%(J) GRM1885C2A120JA01D GRM1885C1H120JA01D 15pF(150) 5%(J) GRM1885C2A150JA01D GRM1885C1H150JA01D 18pF(180) 5%(J) GRM1885C2A180JA01D GRM1885C1H180JA01D 22pF(220) 5%(J) GRM1885C2A220JA01D GRM1885C1H220JA01D 27pF(270) 5%(J) GRM1885C2A270JA01D GRM1885C1H270JA01D 33pF(330) 5%(J) GRM1885C2A330JA01D GRM1885C1H330JA01D 39pF(390) 5%(J) GRM1885C2A390JA01D GRM1885C1H390JA01D 47pF(470) 5%(J) GRM1885C2A470JA01D GRM1885C1H470JA01D 56pF(560) 5%(J) GRM1885C2A560JA01D GRM1885C1H560JA01D 68pF(680) 5%(J) GRM1885C2A680JA01D GRM1885C1H680JA01D 82pF(820) 5%(J) GRM1885C2A820JA01D GRM1885C1H820JA01D 100pF(101) 5%(J) GRM1885C2A101JA01D GRM1885C1H101JA01D 120pF(121) 5%(J) GRM1885C2A121JA01D GRM1885C1H121JA01D 150pF(151) 5%(J) GRM1885C2A151JA01D GRM1885C1H151JA01D 180pF(181) 5%(J) GRM1885C2A181JA01D GRM1885C1H181JA01D 220pF(221) 5%(J) GRM1885C2A221JA01D GRM1885C1H221JA01D 270pF(271) 5%(J) GRM1885C2A271JA01D GRM1885C1H271JA01D 330pF(331) 5%(J) GRM1885C2A331JA01D GRM1885C1H331JA01D 390pF(391) 5%(J) GRM1885C2A391JA01D GRM1885C1H391JA01D 470pF(471) 5%(J) GRM1885C2A471JA01D GRM1885C1H471JA01D 560pF(561) 5%(J) GRM1885C2A561JA01D GRM1885C1H561JA01D 680pF(681) 5%(J) GRM1885C2A681JA01D GRM1885C1H681JA01D 820pF(821) 5%(J) GRM1885C2A821JA01D GRM1885C1H821JA01D 1000pF(102) 5%(J) GRM1885C2A102JA01D GRM1885C1H102JA01D 1200pF(122) 5%(J) GRM1885C2A122JA01D GRM1885C1H122JA01D 1500pF(152) 5%(J) GRM1885C2A152JA01D GRM1885C1H152JA01D 1800pF(182) 5%(J) GRM1885C1H182JA01D 2200pF(222) 5%(J) GRM1885C1H222JA01D 2700pF(272) 5%(J) GRM1885C1H272JA01D 3300pF(332) 5%(J) GRM1885C1H332JA01D 3900pF(392) 5%(J) GRM1885C1H392JA01D The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code 25 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 1 Temperature Compensating Type C0G(5C) Characteristics 2.0x1.25(21)<0805> LxW [mm] 100(2A) Rated Volt. [Vdc] Capacitance 3.2x1.6(31)<1206> 50(1H) Tolerance 100(2A) 50(1H) Part Number 100pF(101) 5%(J) GRM2165C2A101JA01D 120pF(121) 5%(J) GRM2165C2A121JA01D 150pF(151) 5%(J) GRM2165C2A151JA01D 180pF(181) 5%(J) GRM2165C2A181JA01D 220pF(221) 5%(J) GRM2165C2A221JA01D 270pF(271) 5%(J) GRM2165C2A271JA01D 330pF(331) 5%(J) GRM2165C2A331JA01D 390pF(391) 5%(J) GRM2165C2A391JA01D 470pF(471) 5%(J) GRM2165C2A471JA01D 560pF(561) 5%(J) GRM2165C2A561JA01D 680pF(681) 5%(J) GRM2165C2A681JA01D 820pF(821) 5%(J) GRM2165C2A821JA01D 1000pF(102) 5%(J) GRM2165C2A102JA01D 1200pF(122) 5%(J) GRM2165C2A122JA01D GRM2165C1H122JA01D 1500pF(152) 5%(J) GRM2165C2A152JA01D GRM2165C1H152JA01D 1800pF(182) 5%(J) GRM2165C2A182JA01D GRM2165C1H182JA01D GRM3195C2A182JA01D 2200pF(222) 5%(J) GRM2165C2A222JA01D GRM2165C1H222JA01D GRM3195C2A222JA01D 2700pF(272) 5%(J) GRM2165C2A272JA01D GRM2165C1H272JA01D GRM3195C2A272JA01D 3300pF(332) 5%(J) GRM2165C2A332JA01D GRM2165C1H332JA01D GRM3195C2A332JA01D 3900pF(392) 5%(J) GRM2165C1H392JA01D GRM3195C2A392JA01D 4700pF(472) 5%(J) GRM2165C1H472JA01D GRM3195C2A472JA01D GRM3195C1H472JA01D 5600pF(562) 5%(J) GRM2195C1H562JA01D GRM3195C2A562JA01D GRM3195C1H562JA01D 6800pF(682) 5%(J) GRM2195C1H682JA01D GRM3195C2A682JA01D GRM3195C1H682JA01D 8200pF(822) 5%(J) GRM2195C1H822JA01D GRM3195C2A822JA01D GRM3195C1H822JA01D 10000pF(103) 5%(J) GRM2195C1H103JA01D GRM3195C2A103JA01D GRM3195C1H103JA01D 12000pF(123) 5%(J) GRM2195C1H123JA01D GRM3195C1H123JA01D 15000pF(153) 5%(J) GRM2195C1H153JA01D GRM3195C1H153JA01D 18000pF(183) 5%(J) GRM21B5C1H183JA01L GRM3195C1H183JA01D 22000pF(223) 5%(J) GRM21B5C1H223JA01L GRM3195C1H223JA01D 27000pF(273) 5%(J) GRM3195C1H273JA01D 33000pF(333) 5%(J) GRM3195C1H333JA01D 39000pF(393) 5%(J) GRM3195C1H393JA01D 47000pF(473) 5%(J) GRM31M5C1H473JA01L 56000pF(563) 5%(J) GRM31M5C1H563JA01L 68000pF(683) 5%(J) GRM31C5C1H683JA01L 82000pF(823) 5%(J) GRM31C5C1H823JA01L 100000pF(104) 5%(J) GRM31C5C1H104JA01L The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code qProduct ID wSeries tTemperature Characteristics u i o !0 iCapacitance Tolerance q w e r t y Packaging Code in Part Number is a code shows STD 180mm Reel Taping. (Part Number) GR 26 M 21 6 5C 2A 101 J A01 D eDimension (LxW) yRated Voltage oIndividual Specification Code rDimension (T) uCapacitance !0Packaging PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 1 Temperature Compensating Type C0G(5C) Characteristics Low Profile 1.0x0.5(15)<0402> LxW [mm] 50(1H) Rated Volt. [Vdc] Capacitance Tolerance 1.0x0.5(15)<0402> LxW [mm] 50(1H) Rated Volt. [Vdc] Part Number Capacitance Tolerance Part Number 0.1pF(R10) 0.1pF(B) GRM1535C1HR10BDD5D 5.1pF(5R1) 0.5pF(D) GRM1535C1H5R1DDD5D 0.2pF(R20) 0.1pF(B) GRM1535C1HR20BDD5D 5.2pF(5R2) 0.5pF(D) GRM1535C1H5R2DDD5D 0.3pF(R30) 0.1pF(B) GRM1535C1HR30BDD5D 5.3pF(5R3) 0.5pF(D) GRM1535C1H5R3DDD5D 0.4pF(R40) 0.1pF(B) GRM1535C1HR40BDD5D 5.4pF(5R4) 0.5pF(D) GRM1535C1H5R4DDD5D 0.5pF(R50) 0.1pF(B) GRM1535C1HR50BDD5D 5.5pF(5R5) 0.5pF(D) GRM1535C1H5R5DDD5D 0.6pF(R60) 0.1pF(B) GRM1535C1HR60BDD5D 5.6pF(5R6) 0.5pF(D) GRM1535C1H5R6DDD5D 0.7pF(R70) 0.1pF(B) GRM1535C1HR70BDD5D 5.7pF(5R7) 0.5pF(D) GRM1535C1H5R7DDD5D 0.8pF(R80) 0.1pF(B) GRM1535C1HR80BDD5D 5.8pF(5R8) 0.5pF(D) GRM1535C1H5R8DDD5D 0.9pF(R90) 0.1pF(B) GRM1535C1HR90BDD5D 5.9pF(5R9) 0.5pF(D) GRM1535C1H5R9DDD5D 1.0pF(1R0) 0.25pF(C) GRM1535C1H1R0CDD5D 6.0pF(6R0) 0.5pF(D) GRM1535C1H6R0DDD5D 1.1pF(1R1) 0.25pF(C) GRM1535C1H1R1CDD5D 6.1pF(6R1) 0.5pF(D) GRM1535C1H6R1DDD5D 1.2pF(1R2) 0.25pF(C) GRM1535C1H1R2CDD5D 6.2pF(6R2) 0.5pF(D) GRM1535C1H6R2DDD5D 1.3pF(1R3) 0.25pF(C) GRM1535C1H1R3CDD5D 6.3pF(6R3) 0.5pF(D) GRM1535C1H6R3DDD5D 1.4pF(1R4) 0.25pF(C) GRM1535C1H1R4CDD5D 6.4pF(6R4) 0.5pF(D) GRM1535C1H6R4DDD5D 1.5pF(1R5) 0.25pF(C) GRM1535C1H1R5CDD5D 6.5pF(6R5) 0.5pF(D) GRM1535C1H6R5DDD5D 1.6pF(1R6) 0.25pF(C) GRM1535C1H1R6CDD5D 6.6pF(6R6) 0.5pF(D) GRM1535C1H6R6DDD5D 1.7pF(1R7) 0.25pF(C) GRM1535C1H1R7CDD5D 6.7pF(6R7) 0.5pF(D) GRM1535C1H6R7DDD5D 1.8pF(1R8) 0.25pF(C) GRM1535C1H1R8CDD5D 6.8pF(6R8) 0.5pF(D) GRM1535C1H6R8DDD5D 1.9pF(1R9) 0.25pF(C) GRM1535C1H1R9CDD5D 6.9pF(6R9) 0.5pF(D) GRM1535C1H6R9DDD5D 2.0pF(2R0) 0.25pF(C) GRM1535C1H2R0CDD5D 7.0pF(7R0) 0.5pF(D) GRM1535C1H7R0DDD5D 2.1pF(2R1) 0.25pF(C) GRM1535C1H2R1CDD5D 7.1pF(7R1) 0.5pF(D) GRM1535C1H7R1DDD5D 2.2pF(2R2) 0.25pF(C) GRM1535C1H2R2CDD5D 7.2pF(7R2) 0.5pF(D) GRM1535C1H7R2DDD5D 2.3pF(2R3) 0.25pF(C) GRM1535C1H2R3CDD5D 7.3pF(7R3) 0.5pF(D) GRM1535C1H7R3DDD5D 2.4pF(2R4) 0.25pF(C) GRM1535C1H2R4CDD5D 7.4pF(7R4) 0.5pF(D) GRM1535C1H7R4DDD5D 2.5pF(2R5) 0.25pF(C) GRM1535C1H2R5CDD5D 7.5pF(7R5) 0.5pF(D) GRM1535C1H7R5DDD5D 2.6pF(2R6) 0.25pF(C) GRM1535C1H2R6CDD5D 7.6pF(7R6) 0.5pF(D) GRM1535C1H7R6DDD5D 2.7pF(2R7) 0.25pF(C) GRM1535C1H2R7CDD5D 7.7pF(7R7) 0.5pF(D) GRM1535C1H7R7DDD5D 2.8pF(2R8) 0.25pF(C) GRM1535C1H2R8CDD5D 7.8pF(7R8) 0.5pF(D) GRM1535C1H7R8DDD5D 2.9pF(2R9) 0.25pF(C) GRM1535C1H2R9CDD5D 7.9pF(7R9) 0.5pF(D) GRM1535C1H7R9DDD5D 3.0pF(3R0) 0.25pF(C) GRM1535C1H3R0CDD5D 8.0pF(8R0) 0.5pF(D) GRM1535C1H8R0DDD5D 3.1pF(3R1) 0.25pF(C) GRM1535C1H3R1CDD5D 8.1pF(8R1) 0.5pF(D) GRM1535C1H8R1DDD5D 3.2pF(3R2) 0.25pF(C) GRM1535C1H3R2CDD5D 8.2pF(8R2) 0.5pF(D) GRM1535C1H8R2DDD5D 3.3pF(3R3) 0.25pF(C) GRM1535C1H3R3CDD5D 8.3pF(8R3) 0.5pF(D) GRM1535C1H8R3DDD5D 3.4pF(3R4) 0.25pF(C) GRM1535C1H3R4CDD5D 8.4pF(8R4) 0.5pF(D) GRM1535C1H8R4DDD5D 3.5pF(3R5) 0.25pF(C) GRM1535C1H3R5CDD5D 8.5pF(8R5) 0.5pF(D) GRM1535C1H8R5DDD5D 3.6pF(3R6) 0.25pF(C) GRM1535C1H3R6CDD5D 8.6pF(8R6) 0.5pF(D) GRM1535C1H8R6DDD5D 3.7pF(3R7) 0.25pF(C) GRM1535C1H3R7CDD5D 8.7pF(8R7) 0.5pF(D) GRM1535C1H8R7DDD5D 3.8pF(3R8) 0.25pF(C) GRM1535C1H3R8CDD5D 8.8pF(8R8) 0.5pF(D) GRM1535C1H8R8DDD5D 3.9pF(3R9) 0.25pF(C) GRM1535C1H3R9CDD5D 8.9pF(8R9) 0.5pF(D) GRM1535C1H8R9DDD5D 4.0pF(4R0) 0.25pF(C) GRM1535C1H4R0CDD5D 9.0pF(9R0) 0.5pF(D) GRM1535C1H9R0DDD5D 4.1pF(4R1) 0.25pF(C) GRM1535C1H4R1CDD5D 9.1pF(9R1) 0.5pF(D) GRM1535C1H9R1DDD5D 4.2pF(4R2) 0.25pF(C) GRM1535C1H4R2CDD5D 9.2pF(9R2) 0.5pF(D) GRM1535C1H9R2DDD5D 4.3pF(4R3) 0.25pF(C) GRM1535C1H4R3CDD5D 9.3pF(9R3) 0.5pF(D) GRM1535C1H9R3DDD5D 4.4pF(4R4) 0.25pF(C) GRM1535C1H4R4CDD5D 9.4pF(9R4) 0.5pF(D) GRM1535C1H9R4DDD5D 4.5pF(4R5) 0.25pF(C) GRM1535C1H4R5CDD5D 9.5pF(9R5) 0.5pF(D) GRM1535C1H9R5DDD5D 4.6pF(4R6) 0.25pF(C) GRM1535C1H4R6CDD5D 9.6pF(9R6) 0.5pF(D) GRM1535C1H9R6DDD5D 4.7pF(4R7) 0.25pF(C) GRM1535C1H4R7CDD5D 9.7pF(9R7) 0.5pF(D) GRM1535C1H9R7DDD5D 4.8pF(4R8) 0.25pF(C) GRM1535C1H4R8CDD5D 9.8pF(9R8) 0.5pF(D) GRM1535C1H9R8DDD5D 4.9pF(4R9) 0.25pF(C) GRM1535C1H4R9CDD5D 9.9pF(9R9) 0.5pF(D) GRM1535C1H9R9DDD5D 5.0pF(5R0) 0.25pF(C) GRM1535C1H5R0CDD5D The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code 27 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 1 Temperature Compensating Type C0G(5C) Characteristics Low Profile 1.0x0.5(15)<0402> LxW [mm] 50(1H) Rated Volt. [Vdc] Capacitance Tolerance Part Number 10pF(100) 5%(J) GRM1535C1H100JDD5D 12pF(120) 5%(J) GRM1535C1H120JDD5D 15pF(150) 5%(J) GRM1535C1H150JDD5D 18pF(180) 5%(J) GRM1535C1H180JDD5D 22pF(220) 5%(J) GRM1535C1H220JDD5D 27pF(270) 5%(J) GRM1535C1H270JDD5D 33pF(330) 5%(J) GRM1535C1H330JDD5D 39pF(390) 5%(J) GRM1535C1H390JDD5D 47pF(470) 5%(J) GRM1535C1H470JDD5D 56pF(560) 5%(J) GRM1535C1H560JDD5D 68pF(680) 5%(J) GRM1535C1H680JDD5D 82pF(820) 5%(J) GRM1535C1H820JDD5D 100pF(101) 5%(J) GRM1535C1H101JDD5D 120pF(121) 5%(J) GRM1535C1H121JDD5D 150pF(151) 5%(J) GRM1535C1H151JDD5D 180pF(181) 5%(J) GRM1535C1H181JDD5D 220pF(221) 5%(J) GRM1535C1H221JDD5D 270pF(271) 5%(J) GRM1535C1H271JDD5D 330pF(331) 5%(J) GRM1535C1H331JDD5D 390pF(391) 5%(J) GRM1535C1H391JDD5D 470pF(471) 5%(J) GRM1535C1H471JDD5D 560pF(561) 5%(J) GRM1535C1H561JDD5D 680pF(681) 5%(J) GRM1535C1H681JDD5D The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code qProduct ID wSeries tTemperature Characteristics u i o !0 iCapacitance Tolerance q w e r t y Packaging Code in Part Number is a code shows STD 180mm Reel Taping. (Part Number) GR 28 M 15 3 5C 1H 100 J DD5 D eDimension (LxW) yRated Voltage oIndividual Specification Code rDimension (T) uCapacitance !0Packaging PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 1 Temperature Compensating Type C0G(5C) Characteristics Low Profile 2.0x1.25(21)<0805> LxW [mm] 100(2A) Rated Volt. [Vdc] Capacitance 3.2x1.6(31)<1206> 50(1H) Tolerance 100(2A) 50(1H) Part Number 100pF(101) 5%(J) GRM2165C2A101JA01D 120pF(121) 5%(J) GRM2165C2A121JA01D 150pF(151) 5%(J) GRM2165C2A151JA01D 180pF(181) 5%(J) GRM2165C2A181JA01D 220pF(221) 5%(J) GRM2165C2A221JA01D 270pF(271) 5%(J) GRM2165C2A271JA01D 330pF(331) 5%(J) GRM2165C2A331JA01D 390pF(391) 5%(J) GRM2165C2A391JA01D 470pF(471) 5%(J) GRM2165C2A471JA01D 560pF(561) 5%(J) GRM2165C2A561JA01D 680pF(681) 5%(J) GRM2165C2A681JA01D 820pF(821) 5%(J) GRM2165C2A821JA01D 1000pF(102) 5%(J) GRM2165C2A102JA01D 1200pF(122) 5%(J) GRM2165C2A122JA01D GRM2165C1H122JA01D 1500pF(152) 5%(J) GRM2165C2A152JA01D GRM2165C1H152JA01D 1800pF(182) 5%(J) GRM2165C2A182JA01D GRM2165C1H182JA01D GRM3195C2A182JA01D 2200pF(222) 5%(J) GRM2165C2A222JA01D GRM2165C1H222JA01D GRM3195C2A222JA01D 2700pF(272) 5%(J) GRM2165C2A272JA01D GRM2165C1H272JA01D GRM3195C2A272JA01D 3300pF(332) 5%(J) GRM2165C2A332JA01D GRM2165C1H332JA01D GRM3195C2A332JA01D 3900pF(392) 5%(J) GRM2165C1H392JA01D GRM3195C2A392JA01D 4700pF(472) 5%(J) GRM2165C1H472JA01D GRM3195C2A472JA01D GRM3195C1H472JA01D 5600pF(562) 5%(J) GRM2195C1H562JA01D GRM3195C2A562JA01D GRM3195C1H562JA01D 6800pF(682) 5%(J) GRM2195C1H682JA01D GRM3195C2A682JA01D GRM3195C1H682JA01D 8200pF(822) 5%(J) GRM2195C1H822JA01D GRM3195C2A822JA01D GRM3195C1H822JA01D 10000pF(103) 5%(J) GRM2195C1H103JA01D GRM3195C2A103JA01D GRM3195C1H103JA01D 12000pF(123) 5%(J) GRM2195C1H123JA01D GRM3195C1H123JA01D 15000pF(153) 5%(J) GRM2195C1H153JA01D GRM3195C1H153JA01D 18000pF(183) 5%(J) GRM3195C1H183JA01D 22000pF(223) 5%(J) GRM3195C1H223JA01D 27000pF(273) 5%(J) GRM3195C1H273JA01D 33000pF(333) 5%(J) GRM3195C1H333JA01D 39000pF(393) 5%(J) GRM3195C1H393JA01D 47000pF(473) 5%(J) GRM31M5C1H473JA01L 56000pF(563) 5%(J) The part number code is shown in ( ) and Unit is shown in [ ]. GRM31M5C1H563JA01L < >: EIA [inch] Code 29 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 1 Temperature Compensating Type U2J(7U) Characteristics 0.6x0.3(03)<0201> LxW [mm] 50(1H) Rated Volt. [Vdc] Capacitance 1.0x0.5(15)<0402> 25(1E) Tolerance 50(1H) 1.0pF(1R0) 0.25pF(C) GRM0337U1H1R0CD01D GRM1557U1H1R0CZ01D 2.0pF(2R0) 0.25pF(C) GRM0337U1H2R0CD01D GRM1557U1H2R0CZ01D 3.0pF(3R0) 0.25pF(C) GRM0337U1H3R0CD01D GRM1557U1H3R0CZ01D 4.0pF(4R0) 0.25pF(C) GRM0337U1H4R0CD01D GRM1557U1H4R0CZ01D 5.0pF(5R0) 0.25pF(C) GRM0337U1H5R0CD01D GRM1557U1H5R0CZ01D 6.0pF(6R0) 0.5pF(D) GRM0337U1H6R0DD01D GRM1557U1H6R0DZ01D 7.0pF(7R0) 0.5pF(D) GRM0337U1H7R0DD01D GRM1557U1H7R0DZ01D 8.0pF(8R0) 0.5pF(D) GRM0337U1H8R0DD01D GRM1557U1H8R0DZ01D 9.0pF(9R0) 0.5pF(D) GRM0337U1H9R0DD01D GRM1557U1H9R0DZ01D 10pF(100) 5%(J) GRM0337U1H100JD01D GRM1557U1H100JZ01D 12pF(120) 5%(J) GRM0337U1H120JD01D GRM1557U1H120JZ01D 15pF(150) 5%(J) GRM0337U1H150JD01D 18pF(180) 5%(J) GRM0337U1E180JD01D GRM1557U1H180JZ01D 22pF(220) 5%(J) GRM0337U1E220JD01D GRM1557U1H220JZ01D 27pF(270) 5%(J) GRM0337U1E270JD01D GRM1557U1H270JZ01D 33pF(330) 5%(J) GRM0337U1E330JD01D GRM1557U1H330JZ01D 39pF(390) 5%(J) GRM0337U1E390JD01D GRM1557U1H390JZ01D 47pF(470) 5%(J) GRM0337U1E470JD01D GRM1557U1H470JZ01D 56pF(560) 5%(J) GRM0337U1E560JD01D GRM1557U1H560JZ01D 68pF(680) 5%(J) GRM0337U1E680JD01D GRM1557U1H680JZ01D 82pF(820) 5%(J) GRM0337U1E820JD01D GRM1557U1H820JZ01D 100pF(101) 5%(J) GRM0337U1E101JD01D GRM1557U1H101JZ01D 120pF(121) 5%(J) GRM1557U1H121JZ01D 150pF(151) 5%(J) GRM1557U1H151JZ01D 180pF(181) 5%(J) GRM1557U1H181JZ01D 1200pF(122) 5%(J) GRM1557U1A122JA01D 1500pF(152) 5%(J) GRM1557U1A152JA01D 1800pF(182) 5%(J) GRM1557U1A182JA01D 2200pF(222) 5%(J) GRM1557U1A222JA01D 2700pF(272) 5%(J) GRM1557U1A272JA01D 3300pF(332) 5%(J) GRM1557U1A332JA01D 3900pF(392) 5%(J) GRM1557U1A392JA01D 4700pF(472) 5%(J) GRM1557U1H150JZ01D GRM1557U1A472JA01D The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code qProduct ID wSeries tTemperature Characteristics u i o !0 iCapacitance Tolerance q w e r t y Packaging Code in Part Number is a code shows STD 180mm Reel Taping. (Part Number) GR 30 10(1A) Part Number M 03 3 7U 1H 1R0 C D01 D eDimension (LxW) yRated Voltage oIndividual Specification Code rDimension (T) uCapacitance !0Packaging PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 1 Temperature Compensating Type U2J(7U) Characteristics 1.6x0.8(18)<0603> LxW [mm] 50(1H) Rated Volt. [Vdc] Capacitance 10(1A) Tolerance Part Number 1000pF(102) 5%(J) GRM1887U1H102JA01D 1200pF(122) 5%(J) GRM1887U1H122JA01D 1500pF(152) 5%(J) GRM1887U1H152JA01D 1800pF(182) 5%(J) GRM1887U1H182JA01D 2200pF(222) 5%(J) GRM1887U1H222JA01D 2700pF(272) 5%(J) GRM1887U1H272JA01D 3300pF(332) 5%(J) GRM1887U1H332JA01D 3900pF(392) 5%(J) GRM1887U1H392JA01D 4700pF(472) 5%(J) GRM1887U1H472JA01D 5600pF(562) 5%(J) GRM1887U1H562JA01D 6800pF(682) 5%(J) GRM1887U1H682JA01D 8200pF(822) 5%(J) GRM1887U1H822JA01D 10000pF(103) 5%(J) GRM1887U1H103JA01D 12000pF(123) 5%(J) GRM1887U1A123JA01D 15000pF(153) 5%(J) GRM1887U1A153JA01D 18000pF(183) 5%(J) GRM1887U1A183JA01D 22000pF(223) 5%(J) GRM1887U1A223JA01D 2.0x1.25(21)<0805> LxW [mm] 50(1H) Rated Volt. [Vdc] Capacitance 3.2x1.6(31)<1206> 10(1A) Tolerance 50(1H) Part Number 10000pF(103) 5%(J) GRM2167U1H103JA01D 12000pF(123) 5%(J) GRM2167U1H123JA01D 15000pF(153) 5%(J) GRM2167U1H153JA01D 18000pF(183) 5%(J) GRM2167U1H183JA01D 22000pF(223) 5%(J) GRM2197U1H223JA01D 27000pF(273) 5%(J) GRM2197U1H273JA01D 33000pF(333) 5%(J) GRM21A7U1H333JA39L 39000pF(393) 5%(J) GRM21B7U1H393JA01L 47000pF(473) 5%(J) GRM21B7U1H473JA01L 56000pF(563) 5%(J) GRM2197U1A563JA01D GRM3197U1H563JA01D 68000pF(683) 5%(J) GRM21B7U1A683JA01L GRM31M7U1H683JA01L 82000pF(823) 5%(J) GRM21B7U1A823JA01L GRM31M7U1H823JA01L 100000pF(104) 5%(J) GRM21B7U1A104JA01L GRM31M7U1H104JA01L The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code 31 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 1 Temperature Compensating Type U2J(7U) Characteristics Low Profile 1.6x0.8(18)<0603> LxW [mm] 50(1H) Rated Volt. [Vdc] Capacitance 10(1A) Tolerance Part Number 2200pF(222) 5%(J) GRM1857U1H222JA44D 2700pF(272) 5%(J) GRM1857U1H272JA44D 3300pF(332) 5%(J) GRM1857U1H332JA44D 3900pF(392) 5%(J) GRM1857U1H392JA44D 4700pF(472) 5%(J) GRM1857U1H472JA44D 5600pF(562) 5%(J) GRM1857U1A562JA44D 6800pF(682) 5%(J) GRM1857U1A682JA44D 8200pF(822) 5%(J) GRM1857U1A822JA44D 10000pF(103) 5%(J) GRM1857U1A103JA44D 2.0x1.25(21)<0805> LxW [mm] 50(1H) Rated Volt. [Vdc] Capacitance 3.2x1.6(31)<1206> 10(1A) Tolerance 50(1H) Part Number 10000pF(103) 5%(J) GRM2167U1H103JA01D 12000pF(123) 5%(J) GRM2167U1H123JA01D 15000pF(153) 5%(J) GRM2167U1H153JA01D 18000pF(183) 5%(J) GRM2167U1H183JA01D 22000pF(223) 5%(J) GRM2197U1H223JA01D 27000pF(273) 5%(J) GRM2197U1H273JA01D 33000pF(333) 5%(J) GRM21A7U1H333JA39L 56000pF(563) 5%(J) 68000pF(683) 5%(J) GRM31M7U1H683JA01L 82000pF(823) 5%(J) GRM31M7U1H823JA01L 100000pF(104) 5%(J) GRM2197U1A563JA01D GRM3197U1H563JA01D GRM31M7U1H104JA01L The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code qProduct ID wSeries tTemperature Characteristics u i o !0 iCapacitance Tolerance q w e r t y Packaging Code in Part Number is a code shows STD 180mm Reel Taping. (Part Number) GR 32 M 18 5 7U 1H 222 J A44 D eDimension (LxW) yRated Voltage oIndividual Specification Code rDimension (T) uCapacitance !0Packaging PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 1 Temperature Compensating Type P2H(6P) Characteristics 1.0x0.5(15)<0402> LxW [mm] 50(1H) Rated Volt. [Vdc] Capacitance Tolerance 1.0pF(1R0) 0.25pF(C) GRM1556P1H1R0CZ01D 2.0pF(2R0) 0.25pF(C) GRM1556P1H2R0CZ01D 3.0pF(3R0) 0.25pF(C) GRM1556P1H3R0CZ01D 4.0pF(4R0) 0.25pF(C) GRM1556P1H4R0CZ01D 5.0pF(5R0) 0.25pF(C) GRM1556P1H5R0CZ01D 6.0pF(6R0) 0.5pF(D) GRM1556P1H6R0DZ01D 7.0pF(7R0) 0.5pF(D) GRM1556P1H7R0DZ01D 8.0pF(8R0) 0.5pF(D) GRM1556P1H8R0DZ01D 9.0pF(9R0) 0.5pF(D) GRM1556P1H9R0DZ01D 10pF(100) 5%(J) GRM1556P1H100JZ01D 12pF(120) 5%(J) GRM1556P1H120JZ01D 15pF(150) 5%(J) GRM1556P1H150JZ01D 18pF(180) 5%(J) GRM1556P1H180JZ01D 22pF(220) 5%(J) GRM1556P1H220JZ01D 27pF(270) 5%(J) GRM1556P1H270JZ01D The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code Temperature Compensating Type R2H(6R) Characteristics LxW [mm] Rated Volt. [Vdc] Capacitance 0.6x0.3(03)<0201> 1.0x0.5(15)<0402> 25(1E) 50(1H) Tolerance Part Number 1.0pF(1R0) 0.25pF(C) GRM0336R1E1R0CD01D GRM1556R1H1R0CD01D 2.0pF(2R0) 0.25pF(C) GRM0336R1E2R0CD01D GRM1556R1H2R0CZ01D 3.0pF(3R0) 0.25pF(C) GRM0336R1E3R0CD01D GRM1556R1H3R0CZ01D 4.0pF(4R0) 0.25pF(C) GRM0336R1E4R0CD01D GRM1556R1H4R0CZ01D 5.0pF(5R0) 0.25pF(C) GRM0336R1E5R0CD01D GRM1556R1H5R0CZ01D 6.0pF(6R0) 0.5pF(D) GRM0336R1E6R0DD01D GRM1556R1H6R0DZ01D 7.0pF(7R0) 0.5pF(D) GRM0336R1E7R0DD01D GRM1556R1H7R0DZ01D 8.0pF(8R0) 0.5pF(D) GRM0336R1E8R0DD01D GRM1556R1H8R0DZ01D 9.0pF(9R0) 0.5pF(D) GRM0336R1E9R0DD01D GRM1556R1H9R0DZ01D 10pF(100) 5%(J) GRM0336R1E100JD01D GRM1556R1H100JZ01D 12pF(120) 5%(J) GRM0336R1E120JD01D GRM1556R1H120JZ01D 15pF(150) 5%(J) GRM0336R1E150JD01D GRM1556R1H150JZ01D 18pF(180) 5%(J) GRM0336R1E180JD01D GRM1556R1H180JZ01D 22pF(220) 5%(J) GRM0336R1E220JD01D GRM1556R1H220JZ01D 27pF(270) 5%(J) GRM0336R1E270JD01D GRM1556R1H270JZ01D 33pF(330) 5%(J) GRM0336R1E330JD01D GRM1556R1H330JZ01D 39pF(390) 5%(J) GRM0336R1E390JD01D 47pF(470) 5%(J) GRM0336R1E470JD01D 56pF(560) 5%(J) GRM0336R1E560JD01D 68pF(680) 5%(J) GRM0336R1E680JD01D 82pF(820) 5%(J) GRM0336R1E820JD01D 100pF(101) 5%(J) GRM0336R1E101JD01D The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code 33 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 1 Temperature Compensating Type S2H(6S) Characteristics LxW [mm] 0.6x0.3(03)<0201> 1.0x0.5(15)<0402> 25(1E) 50(1H) Rated Volt. [Vdc] Capacitance Tolerance Part Number 1.0pF(1R0) 0.25pF(C) GRM0336S1E1R0CD01D GRM1556S1H1R0CD01D 2.0pF(2R0) 0.25pF(C) GRM0336S1E2R0CD01D GRM1556S1H2R0CZ01D 3.0pF(3R0) 0.25pF(C) GRM0336S1E3R0CD01D GRM1556S1H3R0CZ01D 4.0pF(4R0) 0.25pF(C) GRM0336S1E4R0CD01D GRM1556S1H4R0CZ01D 5.0pF(5R0) 0.25pF(C) GRM0336S1E5R0CD01D GRM1556S1H5R0CZ01D 6.0pF(6R0) 0.5pF(D) GRM0336S1E6R0DD01D GRM1556S1H6R0DZ01D 7.0pF(7R0) 0.5pF(D) GRM0336S1E7R0DD01D GRM1556S1H7R0DZ01D 8.0pF(8R0) 0.5pF(D) GRM0336S1E8R0DD01D GRM1556S1H8R0DZ01D 9.0pF(9R0) 0.5pF(D) GRM0336S1E9R0DD01D GRM1556S1H9R0DZ01D 10pF(100) 5%(J) GRM0336S1E100JD01D GRM1556S1H100JZ01D 12pF(120) 5%(J) GRM0336S1E120JD01D GRM1556S1H120JZ01D 15pF(150) 5%(J) GRM0336S1E150JD01D GRM1556S1H150JZ01D 18pF(180) 5%(J) GRM0336S1E180JD01D GRM1556S1H180JZ01D 22pF(220) 5%(J) GRM0336S1E220JD01D GRM1556S1H220JZ01D 27pF(270) 5%(J) GRM0336S1E270JD01D GRM1556S1H270JZ01D 33pF(330) 5%(J) GRM0336S1E330JD01D GRM1556S1H330JZ01D 39pF(390) 5%(J) GRM0336S1E390JD01D GRM1556S1H390JZ01D 47pF(470) 5%(J) GRM0336S1E470JD01D 56pF(560) 5%(J) GRM0336S1E560JD01D 68pF(680) 5%(J) GRM0336S1E680JD01D 82pF(820) 5%(J) GRM0336S1E820JD01D 100pF(101) 5%(J) GRM0336S1E101JD01D The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code qProduct ID wSeries tTemperature Characteristics u i o !0 iCapacitance Tolerance q w e r t y Packaging Code in Part Number is a code shows STD 180mm Reel Taping. (Part Number) GR 34 M 03 3 6S 1E 1R0 C D01 D eDimension (LxW) yRated Voltage oIndividual Specification Code rDimension (T) uCapacitance !0Packaging PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 1 Temperature Compensating Type T2H(6T) Characteristics LxW [mm] Rated Volt. [Vdc] Capacitance 0.6x0.3(03)<0201> 1.0x0.5(15)<0402> 25(1E) 50(1H) Tolerance Part Number 1.0pF(1R0) 0.25pF(C) GRM0336T1E1R0CD01D GRM1556T1H1R0CD01D 2.0pF(2R0) 0.25pF(C) GRM0336T1E2R0CD01D GRM1556T1H2R0CD01D 3.0pF(3R0) 0.25pF(C) GRM0336T1E3R0CD01D GRM1556T1H3R0CD01D 4.0pF(4R0) 0.25pF(C) GRM0336T1E4R0CD01D GRM1556T1H4R0CD01D 5.0pF(5R0) 0.25pF(C) GRM0336T1E5R0CD01D GRM1556T1H5R0CD01D 6.0pF(6R0) 0.5pF(D) GRM0336T1E6R0DD01D GRM1556T1H6R0DD01D 7.0pF(7R0) 0.5pF(D) GRM0336T1E7R0DD01D GRM1556T1H7R0DD01D 8.0pF(8R0) 0.5pF(D) GRM0336T1E8R0DD01D GRM1556T1H8R0DD01D 9.0pF(9R0) 0.5pF(D) GRM0336T1E9R0DD01D GRM1556T1H9R0DD01D 10pF(100) 5%(J) GRM0336T1E100JD01D GRM1556T1H100JD01D 12pF(120) 5%(J) GRM0336T1E120JD01D GRM1556T1H120JD01D 15pF(150) 5%(J) GRM0336T1E150JD01D GRM1556T1H150JD01D 18pF(180) 5%(J) GRM0336T1E180JD01D GRM1556T1H180JD01D 22pF(220) 5%(J) GRM0336T1E220JD01D GRM1556T1H220JD01D 27pF(270) 5%(J) GRM0336T1E270JD01D GRM1556T1H270JD01D 33pF(330) 5%(J) GRM0336T1E330JD01D GRM1556T1H330JD01D 39pF(390) 5%(J) GRM0336T1E390JD01D GRM1556T1H390JD01D 47pF(470) 5%(J) GRM0336T1E470JD01D GRM1556T1H470JD01D 56pF(560) 5%(J) GRM0336T1E560JD01D GRM1556T1H560JD01D 68pF(680) 5%(J) GRM0336T1E680JD01D GRM1556T1H680JD01D 82pF(820) 5%(J) GRM0336T1E820JD01D GRM1556T1H820JD01D 100pF(101) 5%(J) GRM0336T1E101JD01D GRM1556T1H101JD01D The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code 35 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 1 High Dielectric Constant Type X7R(R7) Characteristics 0.4x0.2(02)<01005> LxW [mm] 10(1A) Rated Volt. [Vdc] Capacitance Tolerance Part Number 68pF(680) 10%(K) GRM022R71A680KA01L 100pF(101) 10%(K) GRM022R71A101KA01L 150pF(151) 10%(K) GRM022R71A151KA01L 220pF(221) 10%(K) GRM022R71A221KA01L 330pF(331) 10%(K) GRM022R71A331KA01L 470pF(471) 10%(K) GRM022R71A471KA01L 0.6x0.3(03)<0201> LxW [mm] 25(1E) Rated Volt. [Vdc] Capacitance 16(1C) Tolerance 10(1A) Part Number 100pF(101) 10%(K) GRM033R71E101KA01D 150pF(151) 10%(K) GRM033R71E151KA01D 220pF(221) 10%(K) GRM033R71E221KA01D 330pF(331) 10%(K) GRM033R71E331KA01D 470pF(471) 10%(K) GRM033R71E471KA01D 680pF(681) 10%(K) GRM033R71E681KA01D 1000pF(102) 10%(K) GRM033R71E102KA01D 1500pF(152) 10%(K) GRM033R71E152KA01D 2200pF(222) 10%(K) GRM033R71C222KA88D 3300pF(332) 10%(K) GRM033R71C332KA88D 4700pF(472) 10%(K) GRM033R71A472KA01D 6800pF(682) 10%(K) GRM033R71A682KA01D 10000pF(103) 10%(K) GRM033R71A103KA01D The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code qProduct ID wSeries tTemperature Characteristics u i o !0 iCapacitance Tolerance q w e r t y Packaging Code in Part Number is a code shows STD 180mm Reel Taping. (Part Number) GR 36 M 02 2 R7 1A 680 K A01 L eDimension (LxW) rDimension (T) yRated Voltage uCapacitance oIndividual Specification Code !0Packaging* *GRM022: D is applicable. PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 1 High Dielectric Constant Type X7R(R7) Characteristics 1.0x0.5(15)<0402> LxW [mm] 100(2A) Rated Volt. [Vdc] Capacitance 50(1H) Tolerance 25(1E) 16(1C) Part Number 220pF(221) 10%(K) GRM155R72A221KA01D GRM155R71H221KA01D 330pF(331) 10%(K) GRM155R72A331KA01D GRM155R71H331KA01D 470pF(471) 10%(K) GRM155R72A471KA01D GRM155R71H471KA01D 680pF(681) 10%(K) GRM155R72A681KA01D GRM155R71H681KA01D 1000pF(102) 10%(K) GRM155R72A102KA01D GRM155R71H102KA01D 1500pF(152) 10%(K) GRM155R72A152KA01D GRM155R71H152KA01D 2200pF(222) 10%(K) GRM155R72A222KA01D GRM155R71H222KA01D 3300pF(332) 10%(K) GRM155R72A332KA01D GRM155R71H332KA01D 4700pF(472) 10%(K) GRM155R72A472KA01D GRM155R71H472KA01D GRM155R71E472KA01D 6800pF(682) 10%(K) GRM155R71H682KA88D GRM155R71E682KA01D 10000pF(103) 10%(K) GRM155R71H103KA88D GRM155R71E103KA01D 15000pF(153) 10%(K) GRM155R71H153KA12D GRM155R71E153KA61D GRM155R71C153KA01D 22000pF(223) 10%(K) GRM155R71H223KA12D GRM155R71E223KA61D GRM155R71C223KA01D 33000pF(333) 10%(K) GRM155R71E333KA88D GRM155R71C333KA01D 47000pF(473) 10%(K) GRM155R71E473KA88D GRM155R71C473KA01D 68000pF(683) 10%(K) GRM155R71C683KA88D 0.10F(104) 10%(K) GRM155R71C104KA88D 1.0x0.5(15)<0402> LxW [mm] 10(1A) Rated Volt. [Vdc] Capacitance Tolerance Part Number 68000pF(683) 10%(K) GRM155R71A683KA01D 0.10F(104) 10%(K) GRM155R71A104KA01D The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code 37 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 1 High Dielectric Constant Type X7R(R7)/X7S(C7) Characteristics 1.6x0.8(18)<0603> LxW [mm] 100(2A) Rated Volt. [Vdc] Capacitance 50(1H) Tolerance 25(1E) 16(1C) Part Number 220pF(221) 10%(K) GRM188R72A221KA01D GRM188R71H221KA01D 330pF(331) 10%(K) GRM188R72A331KA01D GRM188R71H331KA01D 470pF(471) 10%(K) GRM188R72A471KA01D GRM188R71H471KA01D 680pF(681) 10%(K) GRM188R72A681KA01D GRM188R71H681KA01D 1000pF(102) 10%(K) GRM188R72A102KA01D GRM188R71H102KA01D 1500pF(152) 10%(K) GRM188R72A152KA01D GRM188R71H152KA01D 2200pF(222) 10%(K) GRM188R72A222KA01D GRM188R71H222KA01D 3300pF(332) 10%(K) GRM188R72A332KA01D GRM188R71H332KA01D 4700pF(472) 10%(K) GRM188R72A472KA01D GRM188R71H472KA01D 6800pF(682) 10%(K) GRM188R72A682KA01D GRM188R71H682KA01D 10000pF(103) 10%(K) GRM188R72A103KA01D GRM188R71H103KA01D GRM188R71E103KA01D 15000pF(153) 10%(K) GRM188R71H153KA01D GRM188R71E153KA01D 22000pF(223) 10%(K) GRM188R71H223KA01D GRM188R71E223KA01D 33000pF(333) 10%(K) GRM188R71H333KA61D GRM188R71E333KA01D 47000pF(473) 10%(K) GRM188R71H473KA61D GRM188R71E473KA01D 68000pF(683) 10%(K) GRM188R71H683KA93D GRM188R71E683KA01D 0.10F(104) 10%(K) GRM188R71H104KA93D GRM188R71E104KA01D 0.15F(154) 10%(K) GRM188R71E154KA01D GRM188R71C154KA01D 0.22F(224) 10%(K) GRM188R71E224KA88D GRM188R71C224KA01D 0.33F(334) 10%(K) 0.47F(474) 10%(K) GRM188R71E474KA12D* GRM188R71C474KA88D 1.0F(105) 10%(K) GRM188R71E105KA12D* GRM188R71C105KA12D* GRM188R72A104KA35D GRM188R71C334KA01D 1.6x0.8(18)<0603> LxW [mm] 10(1A) Rated Volt. [Vdc] Capacitance 6.3(0J) Tolerance 4(0G) Part Number 0.33F(334) 10%(K) GRM188R71A334KA61D 0.47F(474) 10%(K) GRM188R71A474KA61D 0.68F(684) 10%(K) GRM188R71A684KA61D 1.0F(105) 10%(K) GRM188R71A105KA61D* 2.2F(225) 10%(K) GRM188R71A225KE15D* GRM188C70J225KE20D* GRM188C70G225KE20D* The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code *: Please refer to GRM Series Specifications and Test Method(2). qProduct ID wSeries tTemperature Characteristics u i o !0 iCapacitance Tolerance q w e r t y Packaging Code in Part Number is a code shows STD 180mm Reel Taping. (Part Number) GR 38 M 18 8 R7 2A 221 K A01 D eDimension (LxW) yRated Voltage oIndividual Specification Code rDimension (T) uCapacitance !0Packaging PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 1 High Dielectric Constant Type X7R(R7)/X7U(E7) Characteristics 2.0x1.25(21)<0805> LxW [mm] 100(2A) Rated Volt. [Vdc] Capacitance 50(1H) Tolerance 25(1E) 16(1C) Part Number 6800pF(682) 10%(K) GRM219R72A682KA01D 10000pF(103) 10%(K) GRM21BR72A103KA01L 15000pF(153) 10%(K) GRM21BR72A153KA01L 22000pF(223) 10%(K) GRM21BR72A223KA01L 33000pF(333) 10%(K) GRM21BR72A333KA01L GRM219R71H333KA01D 47000pF(473) 10%(K) GRM21BR72A473KA01L GRM21BR71H473KA01L 68000pF(683) 10%(K) GRM21BR71H683KA01L GRM219R71E683KA01D 0.10F(104) 10%(K) GRM21BR71H104KA01L GRM21BR71E104KA01L 0.15F(154) 10%(K) GRM21BR71H154KA01L GRM21BR71E154KA01L 0.22F(224) 10%(K) GRM21AR72A224KAC5L GRM21BR71H224KA01L GRM21BR71E224KA01L 0.33F(334) 10%(K) GRM21AR72A334KAC5L GRM219R71H334KA88D GRM21BR71E334KA01L 0.47F(474) 10%(K) GRM21BR72A474KA73L GRM21BR71H474KA88L GRM219R71E474KA88D 0.68F(684) 10%(K) GRM219R71E684KA88D GRM219R71C684KA01D 1.0F(105) 10%(K) GRM21BR71H105KA12L GRM21BR71E105KA99L GRM21BR71C105KA01L 2.2F(225) 10%(K) 4.7F(475) 10%(K) GRM219R71E105KA88D GRM21BR71E225KA73L* GRM21BR71C475KA73L* 2.0x1.25(21)<0805> LxW [mm] 10(1A) Rated Volt. [Vdc] Capacitance GRM21BR71C225KA12L Tolerance 6.3(0J) 4(0G) Part Number 2.2F(225) 10%(K) GRM21BR71A225KA01L 4.7F(475) 10%(K) GRM21BR71A475KA73L* 10F(106) 10%(K) GRM21BR71A106KE51L* 22F(226) 20%(M) GRM21BR70J106KE76L* GRM21BE70G226ME51L* The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code *: Please refer to GRM Series Specifications and Test Method(2). 39 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 1 High Dielectric Constant Type X7R(R7)/X7U(E7) Characteristics 3.2x1.6(31)<1206> LxW [mm] 100(2A) Rated Volt. [Vdc] Capacitance 50(1H) Tolerance 25(1E) 16(1C) GRM31MR71C225KA35L Part Number 15000pF(153) 10%(K) GRM319R72A153KA01L 22000pF(223) 10%(K) GRM31MR72A223KA01L 33000pF(333) 10%(K) GRM31MR72A333KA01L 47000pF(473) 10%(K) GRM31MR72A473KA01L 68000pF(683) 10%(K) GRM31MR72A683KA01L 0.10F(104) 10%(K) GRM319R72A104KA01D 0.15F(154) 10%(K) GRM31MR72A154KA01L GRM31MR71H154KA01L 0.22F(224) 10%(K) GRM31MR72A224KA01L GRM31MR71H224KA01L 0.33F(334) 10%(K) 0.47F(474) 10%(K) GRM31MR72A474KA35L GRM31MR71H474KA01L 0.68F(684) 10%(K) GRM31MR72A684KA35L GRM31MR71H684KA88L 1.0F(105) 10%(K) GRM31CR72A105KA01L GRM31MR71H105KA88L 2.2F(225) 10%(K) GRM31CR71H225KA88L GRM31MR71E225KA93L 4.7F(475) 10%(K) GRM31CR71H475KA12L GRM31CR71E475KA88L GRM31CR71C475KA01L 10F(106) 10%(K) GRM31CR71E106KA12L* GRM31CR71C106KAC7L* GRM319R71H334KA01D 3.2x1.6(31)<1206> LxW [mm] 10(1A) Rated Volt. [Vdc] Capacitance 6.3(0J) Tolerance 10F(106) 10%(K) GRM31CR71A106KA01L 22F(226) 20%(M) GRM31CR71A226ME15L* 47F(476) 20%(M) GRM31CR70J226ME19L* GRM31CE70G476ME15L* 3.2x2.5(32)<1210> LxW [mm] 100(2A) Rated Volt. [Vdc] Capacitance 50(1H) Tolerance 35(YA) 25(1E) GRM32ER7YA106KA12L GRM32DR71E106KA12L Part Number 0.68F(684) 10%(K) GRM32CR72A684KA01L 1.0F(105) 10%(K) GRM32CR72A105KA35L 2.2F(225) 10%(K) GRM32ER72A225KA35L 4.7F(475) 10%(K) 10F(106) 10%(K) 22F(226) 20%(M) GRM32NR71H684KA01L GRM32ER71H475KA88L GRM32ER71E226ME15L* 3.2x2.5(32)<1210> LxW [mm] 16(1C) Rated Volt. [Vdc] Capacitance 4(0G) Part Number 10(1A) Tolerance 22F(226) 20%(M) 47F(476) 20%(M) 6.3(0J) Part Number GRM32ER71C226ME18L* GRM32ER71A476ME15L* GRM32ER70J476ME20L* The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code *: Please refer to GRM Series Specifications and Test Method(2). qProduct ID wSeries tTemperature Characteristics u i o !0 iCapacitance Tolerance q w e r t y Packaging Code in Part Number is a code shows STD 180mm Reel Taping. (Part Number) GR 40 M 31 9 R7 2A 153 K A01 L eDimension (LxW) yRated Voltage oIndividual Specification Code rDimension (T) uCapacitance !0Packaging PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 1 High Dielectric Constant Type X7R(R7)/X7T(D7) Characteristics Low Profile 1.0x0.5(15)<0402> LxW [mm] 50(1H) Rated Volt. [Vdc] Capacitance 25(1E) Tolerance 16(1C) Part Number 220pF(221) 10%(K) GRM15XR71H221KA86D 330pF(331) 10%(K) GRM15XR71H331KA86D 470pF(471) 10%(K) GRM15XR71H471KA86D 680pF(681) 10%(K) GRM15XR71H681KA86D 1000pF(102) 10%(K) GRM15XR71H102KA86D 1500pF(152) 10%(K) GRM15XR71H152KA86D 2200pF(222) 10%(K) 3300pF(332) 10%(K) GRM15XR71C332KA86D 4700pF(472) 10%(K) GRM15XR71C472KA86D 6800pF(682) 10%(K) GRM15XR71C682KA86D 10000pF(103) 10%(K) GRM15XR71C103KA86D 1.6x0.8(18)<0603> LxW [mm] 10(1A) Rated Volt. [Vdc] Capacitance 1.0F(105) GRM15XR71E222KA86D Tolerance 10%(K) Part Number GRM185D71A105KE36D* 2.0x1.25(21)<0805> LxW [mm] 100(2A) Rated Volt. [Vdc] Capacitance 50(1H) Tolerance 25(1E) 16(1C) Part Number 6800pF(682) 10%(K) 33000pF(333) 10%(K) 68000pF(683) 10%(K) 0.22F(224) 10%(K) GRM21AR72A224KAC5L 0.33F(334) 10%(K) GRM21AR72A334KAC5L 0.47F(474) 10%(K) GRM219R71E474KA88D 0.68F(684) 10%(K) GRM219R71E684KA88D 1.0F(105) 10%(K) GRM219R71E105KA88D GRM219R72A682KA01D GRM219R71H333KA01D GRM219R71E683KA01D GRM219R71H334KA88D GRM219R71C684KA01D The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code *: Please refer to GRM Series Specifications and Test Method(2). High Dielectric Constant Type X7R(R7) Characteristics Low Profile 3.2x1.6(31)<1206> LxW [mm] 100(2A) Rated Volt. [Vdc] Capacitance 50(1H) Tolerance 15000pF(153) 10%(K) GRM319R72A153KA01L 22000pF(223) 10%(K) GRM31MR72A223KA01L 33000pF(333) 10%(K) GRM31MR72A333KA01L 47000pF(473) 10%(K) GRM31MR72A473KA01L 68000pF(683) 10%(K) GRM31MR72A683KA01L 0.10F(104) 10%(K) GRM319R72A104KA01D 0.15F(154) 10%(K) GRM31MR72A154KA01L GRM31MR71H154KA01L 0.22F(224) 10%(K) GRM31MR72A224KA01L GRM31MR71H224KA01L 0.33F(334) 10%(K) 0.47F(474) 10%(K) GRM31MR72A474KA35L GRM31MR71H474KA01L 0.68F(684) 10%(K) GRM31MR72A684KA35L GRM31MR71H684KA88L 1.0F(105) 10%(K) 2.2F(225) 10%(K) 16(1C) GRM31MR71E225KA93L GRM31MR71C225KA35L GRM319R71H334KA01D GRM31MR71H105KA88L 3.2x2.5(32)<1210> LxW [mm] 100(2A) Rated Volt. [Vdc] Capacitance 25(1E) Part Number Tolerance 50(1H) Part Number 0.68F(684) 10%(K) GRM32CR72A684KA01L 1.0F(105) 10%(K) GRM32CR72A105KA35L The part number code is shown in ( ) and Unit is shown in [ ]. GRM32NR71H684KA01L < >: EIA [inch] Code 41 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 1 High Dielectric Constant Type X6S(C8) Characteristics 0.6x0.3(03)<0201> LxW [mm] 6.3(0J) Rated Volt. [Vdc] Capacitance Tolerance 2.5(0E) Part Number 15000pF(153) 10%(K) GRM033C80J153KE01D* 22000pF(223) 10%(K) GRM033C80J223KE01D* 33000pF(333) 10%(K) GRM033C80J333KE01D* 47000pF(473) 10%(K) GRM033C80J473KE19D* 0.10F(104) 10%(K) GRM033C80J104KE84D* 0.22F(224) 10%(K) GRM033C80E224ME15D* 1.0x0.5(15)<0402> LxW [mm] 25(1E) Rated Volt. [Vdc] Capacitance 6.3(0J) Tolerance 4(0G) Part Number 68000pF(683) 10%(K) GRM155C81E683KA12D 0.10F(104) 10%(K) GRM155C81E104KA12D 0.15F(154) 10%(K) GRM155C80J154KE01D* GRM155C80G154KE01D* 0.22F(224) 10%(K) GRM155C80J224KE01D* GRM155C80G224KE01D* 0.33F(334) 10%(K) GRM155C80J334KE01D* GRM155C80G334KE01D* 0.47F(474) 10%(K) GRM155C80J474KE19D* GRM155C80G474KE01D* 0.68F(684) 10%(K) GRM155C80G684KE19D* 1.6x0.8(18)<0603> LxW [mm] 10(1A) Rated Volt. [Vdc] Capacitance 6.3(0J) Tolerance 1.0F(105) 10%(K) 2.2F(225) 10%(K) 4.7F(475) 10%(K) 10F(106) 20%(M) 2.5(0E) GRM188C80G105MA01D GRM188C81A225KE34D* GRM188C80J225KE19D* GRM188C80G475KE19D* GRM188C80E106ME47D* 2.0x1.25(21)<0805> LxW [mm] 25(1E) Rated Volt. [Vdc] Capacitance 4(0G) Part Number 16(1C) Tolerance 10(1A) 6.3(0J) Part Number 1.0F(105) 10%(K) GRM216C81C105KA12D* 2.2F(225) 10%(K) GRM219C81C225KA12D* 4.7F(475) 10%(K) 10F(106) 10%(K) GRM21BC81E475KA12L* GRM21BC81C475KA88L* GRM219C81A475KE34D* GRM219C80J475KE19D* GRM21BC81A106KE18L* GRM21BC80J106KE19L* GRM219C80J106KE39D* 2.0x1.25(21)<0805> LxW [mm] 4(0G) Rated Volt. [Vdc] Capacitance Tolerance Part Number 10F(106) 10%(K) GRM219C80G106KE19D* 22F(226) 20%(M) GRM21BC80G226ME39L* The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code *: Please refer to GRM Series Specifications and Test Method(2). qProduct ID wSeries tTemperature Characteristics u i o !0 iCapacitance Tolerance q w e r t y Packaging Code in Part Number is a code shows STD 180mm Reel Taping. (Part Number) GR 42 M 03 3 C8 0J 153 K E01 D eDimension (LxW) yRated Voltage oIndividual Specification Code rDimension (T) uCapacitance !0Packaging PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 1 High Dielectric Constant Type X6S(C8)/X6T(D8) Characteristics 3.2x1.6(31)<1206> LxW [mm] 25(1E) Rated Volt. [Vdc] Capacitance 10%(K) 4.7F(475) 10%(K) 10F(106) 10%(K) 22F(226) 20%(M) 47F(476) 20%(M) 6.3(0J) Part Number GRM316C81C225KA12D* GRM319C81C475KA12D* GRM31CC81E106KE15L* GRM31CC81A226ME19L* GRM31CC80J226ME19L* GRM31CC80J476ME18L* 3.2x1.6(31)<1206> LxW [mm] 4(0G) Rated Volt. [Vdc] Tolerance Part Number 47F(476) 20%(M) GRM31CC80G476ME19L* 100F(107) 20%(M) GRM31CD80G107ME39L* 3.2x2.5(32)<1210> LxW [mm] 25(1E) Rated Volt. [Vdc] Capacitance 10(1A) Tolerance 2.2F(225) Capacitance 16(1C) 10(1A) Tolerance 6.3(0J) Part Number 10F(106) 10%(K) GRM32DC81E106KA12L 22F(226) 20%(M) GRM32EC81E226ME15L* 47F(476) 20%(M) GRM32EC81A476ME19L* GRM32EC80J476ME64L* The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code *: Please refer to GRM Series Specifications and Test Method(2). High Dielectric Constant Type X6S(C8) Characteristics Low Profile 1.6x0.8(18)<0603> LxW [mm] 10(1A) Rated Volt. [Vdc] Capacitance 1.0F(105) Tolerance 10%(K) 6.3(0J) Part Number GRM185C81A105KE36D* GRM185C80J105KE26D* 16(1C) 10(1A) 2.0x1.25(21)<0805> LxW [mm] Rated Volt. [Vdc] Capacitance Tolerance 10%(K) GRM216C81C105KA12D* 2.2F(225) 10%(K) GRM219C81C225KA12D* 4.7F(475) 10%(K) 10F(106) 10%(K) GRM219C81A475KE34D* GRM219C80G106KE19D* 16(1C) Rated Volt. [Vdc] Tolerance Part Number 2.2F(225) 10%(K) GRM316C81C225KA12D* 4.7F(475) 10%(K) GRM319C81C475KA12D* 3.2x2.5(32)<1210> LxW [mm] 25(1E) Rated Volt. [Vdc] 10F(106) GRM219C80J475KE19D* GRM219C80J106KE39D* 3.2x1.6(31)<1206> LxW [mm] Capacitance 4(0G) Part Number 1.0F(105) Capacitance 6.3(0J) Tolerance 10%(K) Part Number GRM32DC81E106KA12L The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code *: Please refer to GRM Series Specifications and Test Method(2). 43 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 1 High Dielectric Constant Type X5R(R6) Characteristics 0.4x0.2(02)<01005> LxW [mm] 10(1A) Rated Volt. [Vdc] Capacitance Tolerance 6.3(0J) Part Number 68pF(680) 10%(K) GRM022R61A680KA01L 100pF(101) 10%(K) GRM022R61A101KA01L 150pF(151) 10%(K) GRM022R61A151KA01L 220pF(221) 10%(K) GRM022R61A221KA01L 330pF(331) 10%(K) GRM022R61A331KA01L 470pF(471) 10%(K) GRM022R61A471KA01L 680pF(681) 10%(K) GRM022R60J681KE19L* 1000pF(102) 10%(K) GRM022R60J102KE19L* 1500pF(152) 10%(K) GRM022R60J152KE19L* 2200pF(222) 10%(K) GRM022R60J222KE19L* 3300pF(332) 10%(K) GRM022R60J332KE19L* 4700pF(472) 10%(K) GRM022R60J472KE19L* 6800pF(682) 10%(K) GRM022R60J682KE19L* 10000pF(103) 10%(K) GRM022R60J103KE19L* 0.6x0.3(03)<0201> LxW [mm] 25(1E) Rated Volt. [Vdc] Capacitance 16(1C) Tolerance 10(1A) 6.3(0J) Part Number 100pF(101) 10%(K) 150pF(151) 10%(K) 220pF(221) 10%(K) 330pF(331) 10%(K) 470pF(471) 10%(K) 680pF(681) 10%(K) 1000pF(102) 10%(K) 1500pF(152) 10%(K) GRM033R61A152KA01D 2200pF(222) 10%(K) GRM033R61A222KA01D 3300pF(332) 10%(K) GRM033R61A332KA01D 4700pF(472) 10%(K) GRM033R61A472KA01D 6800pF(682) 10%(K) GRM033R61A682KA01D 10000pF(103) 10%(K) GRM033R61A103KA01D 15000pF(153) 10%(K) GRM033R60J153KE01D* 22000pF(223) 10%(K) GRM033R60J223KE01D* 33000pF(333) 10%(K) GRM033R60J333KE01D* 47000pF(473) 10%(K) 0.10F(104) 10%(K) GRM033R60J473KE19D* GRM033R61A104KE84D* The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code : Please refer to X7R(R7) etc Characteristics. *: Please refer to GRM Series Specifications and Test Method(2). qProduct ID wSeries tTemperature Characteristics u i o !0 iCapacitance Tolerance q w e r t y Packaging Code in Part Number is a code shows STD 180mm Reel Taping. (Part Number) GR 44 M 02 2 R6 1A 680 K A01 L eDimension (LxW) rDimension (T) yRated Voltage uCapacitance oIndividual Specification Code !0Packaging* *GRM022: D is applicable. PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 1 High Dielectric Constant Type X5R(R6) Characteristics 1.0x0.5(15)<0402> LxW [mm] 100(2A) Rated Volt. [Vdc] Capacitance 50(1H) Tolerance 25(1E) 16(1C) Part Number 220pF(221) 10%(K) 330pF(331) 10%(K) 470pF(471) 10%(K) 680pF(681) 10%(K) 1000pF(102) 10%(K) 1500pF(152) 10%(K) 2200pF(222) 10%(K) 3300pF(332) 10%(K) 4700pF(472) 10%(K) 6800pF(682) 10%(K) 10000pF(103) 10%(K) 15000pF(153) 10%(K) 22000pF(223) 10%(K) GRM155R61C223KA01D 33000pF(333) 10%(K) GRM155R61C333KA01D 47000pF(473) 10%(K) 68000pF(683) 10%(K) GRM155R61E683KA87D GRM155R61C683KA88D 0.10F(104) 10%(K) GRM155R61E104KA87D GRM155R61C104KA88D GRM155R61H102KA01D GRM155R61H222KA01D GRM155R61H472KA01D GRM155R61C473KA01D 1.0x0.5(15)<0402> LxW [mm] 10(1A) Rated Volt. [Vdc] Capacitance Tolerance 6.3(0J) 4(0G) Part Number 33000pF(333) 10%(K) GRM155R61A333KA01D 47000pF(473) 10%(K) GRM155R61A473KA01D 68000pF(683) 10%(K) GRM155R61A683KA01D 0.10F(104) 10%(K) GRM155R61A104KA01D 0.15F(154) 10%(K) GRM155R61A154KE19D* GRM155R60J154KE01D* 0.22F(224) 10%(K) GRM155R61A224KE19D* GRM155R60J224KE01D* 0.33F(334) 10%(K) GRM155R61A334KE15D* GRM155R60J334KE01D* 0.47F(474) 10%(K) GRM155R61A474KE15D* GRM155R60J474KE19D* 0.68F(684) 10%(K) GRM155R61A684KE15D* GRM155R60J684KE19D* 1.0F(105) 10%(K) GRM155R61A105KE15D* 4.7F(475) 20%(M) GRM155R60G475ME87D* The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code : Please refer to X7R(R7) etc Characteristics. *: Please refer to GRM Series Specifications and Test Method(2). 45 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 1 High Dielectric Constant Type X5R(R6) Characteristics 1.6x0.8(18)<0603> LxW [mm] 100(2A) Rated Volt. [Vdc] Capacitance 50(1H) Tolerance 25(1E) 16(1C) GRM188R61E104KA01D GRM188R61C104KA01D GRM188R61E224KA88D GRM188R61C224KA88D Part Number 220pF(221) 10%(K) 330pF(331) 10%(K) 470pF(471) 10%(K) 680pF(681) 10%(K) 1000pF(102) 10%(K) 1500pF(152) 10%(K) 2200pF(222) 10%(K) 3300pF(332) 10%(K) 4700pF(472) 10%(K) 6800pF(682) 10%(K) 10000pF(103) 10%(K) 15000pF(153) 10%(K) 22000pF(223) 10%(K) 33000pF(333) 10%(K) 47000pF(473) 10%(K) 68000pF(683) 10%(K) 0.10F(104) 10%(K) 0.15F(154) 10%(K) 0.22F(224) 10%(K) 0.33F(334) 10%(K) 0.47F(474) 10%(K) GRM188R61E474KA12D* GRM188R61C474KA93D* 1.0F(105) 10%(K) GRM188R61E105KA12D* GRM188R61C105KA93D* 2.2F(225) 10%(K) GRM188R61H102KA01D GRM188R61H222KA01D GRM188R61H472KA01D GRM188R61H103KA01D GRM188R61H223KA01D GRM188R61C225KE15D* 1.6x0.8(18)<0603> LxW [mm] 10(1A) Rated Volt. [Vdc] Capacitance 6.3(0J) Tolerance 4(0G) Part Number 0.15F(154) 10%(K) GRM188R61A154KA01D 0.22F(224) 10%(K) GRM188R61A224KA01D 0.33F(334) 10%(K) 0.47F(474) 10%(K) 0.68F(684) 10%(K) 2.2F(225) 10%(K) 4.7F(475) 10%(K) GRM188R60J475KE19D* 10F(106) 20%(M) GRM188R60J106ME47D* GRM188R61A474KA61D GRM188R61A225KE34D* GRM188R60G106ME47D* The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code : Please refer to X7R(R7) etc Characteristics. *: Please refer to GRM Series Specifications and Test Method(2). qProduct ID wSeries tTemperature Characteristics u i o !0 iCapacitance Tolerance q w e r t y Packaging Code in Part Number is a code shows STD 180mm Reel Taping. (Part Number) GR 46 M 18 8 R6 1H 102 K A01 D eDimension (LxW) yRated Voltage oIndividual Specification Code rDimension (T) uCapacitance !0Packaging PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 1 High Dielectric Constant Type X5R(R6) Characteristics 2.0x1.25(21)<0805> LxW [mm] 100(2A) Rated Volt. [Vdc] Capacitance 50(1H) Tolerance 25(1E) 16(1C) Part Number 6800pF(682) 10%(K) 10000pF(103) 10%(K) 15000pF(153) 10%(K) 22000pF(223) 10%(K) 33000pF(333) 10%(K) 47000pF(473) 10%(K) 68000pF(683) 10%(K) 0.10F(104) 10%(K) 0.15F(154) 10%(K) 0.22F(224) 10%(K) 0.33F(334) 10%(K) GRM21BR61C334KA01L 0.47F(474) 10%(K) GRM21BR61C474KA01L 0.68F(684) 10%(K) 1.0F(105) 10%(K) GRM216R61E105KA12D GRM21BR61C105KA01L 2.2F(225) 10%(K) GRM21BR61E225KA12L GRM21BR61C225KA88L* GRM219R61E225KA12D* GRM219R61C225KA88D* GRM21BR61E475KA12L* GRM21BR61C475KA88L* 4.7F(475) 10%(K) 10F(106) 10%(K) GRM219R61C475KE15D* GRM21BR61C106KE15L* 2.0x1.25(21)<0805> LxW [mm] 10(1A) Rated Volt. [Vdc] Capacitance Tolerance 6.3(0J) 4(0G) Part Number 2.2F(225) 10%(K) GRM21BR61A225KA01L 4.7F(475) 10%(K) GRM219R61A475KE34D* 10F(106) 10%(K) GRM21BR61A106KE19L* 22F(226) 20%(M) GRM219R60J106KE19D* GRM219R61A106KE44D* GRM21BR60J226ME39L* GRM219R60G226ME66D* The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code : Please refer to X7R(R7) etc Characteristics. *: Please refer to GRM Series Specifications and Test Method(2). 47 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 1 High Dielectric Constant Type X5R(R6) Characteristics 3.2x1.6(31)<1206> LxW [mm] 100(2A) Rated Volt. [Vdc] Capacitance 50(1H) 25(1E) Tolerance 15000pF(153) 10%(K) 22000pF(223) 10%(K) 33000pF(333) 10%(K) 47000pF(473) 10%(K) 68000pF(683) 10%(K) 0.10F(104) 10%(K) 0.15F(154) 10%(K) 0.22F(224) 10%(K) 0.33F(334) 10%(K) 0.47F(474) 10%(K) 0.68F(684) 10%(K) 1.0F(105) 10%(K) 2.2F(225) 10%(K) 4.7F(475) 10%(K) 10F(106) 10%(K) 22F(226) 20%(M) 16(1C) Part Number GRM31CR61H225KA88L GRM316R61E225KA12D* GRM31CR61E475KA88L GRM31CR61C475KA01L GRM319R61E475KA12D* GRM319R61C475KA88D* GRM31CR61E106KA12L* GRM31CR61C106KA88L GRM319R61C106KE15D* GRM31CR61C226ME15L* 3.2x1.6(31)<1206> LxW [mm] 10(1A) Rated Volt. [Vdc] Capacitance 6.3(0J) Tolerance 4(0G) Part Number 10F(106) 10%(K) GRM319R61A106KE19L* 22F(226) 20%(M) GRM31CR61A226ME19L* 47F(476) 20%(M) GRM31CR60J476ME19L* 100F(107) 20%(M) GRM31CR60J107ME39L* GRM31CR60J226ME19L* 3.2x2.5(32)<1210> LxW [mm] 100(2A) Rated Volt. [Vdc] Capacitance 50(1H) Tolerance 0.68F(684) 10%(K) 1.0F(105) 10%(K) 2.2F(225) 10%(K) 4.7F(475) 10%(K) 10F(106) 10%(K) 22F(226) 20%(M) 35(YA) 25(1E) Part Number GRM32ER6YA106KA12L GRM32DR61E106KA12L GRM32ER61E226ME15L* 3.2x2.5(32)<1210> LxW [mm] 16(1C) Rated Volt. [Vdc] Capacitance GRM31CR60G107ME39L* 10(1A) Tolerance 22F(226) 20%(M) 47F(476) 20%(M) 6.3(0J) Part Number GRM32ER61C476ME15L* GRM32ER61A476ME20L* The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code : Please refer to X7R(R7) etc Characteristics. *: Please refer to GRM Series Specifications and Test Method(2). qProduct ID wSeries tTemperature Characteristics u i o !0 iCapacitance Tolerance q w e r t y Packaging Code in Part Number is a code shows STD 180mm Reel Taping. (Part Number) GR 48 M 31 C R6 1H 225 K A88 L eDimension (LxW) yRated Voltage oIndividual Specification Code rDimension (T) uCapacitance !0Packaging PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 1 High Dielectric Constant Type X5R(R6) Characteristics Low Profile 1.0x0.5(15)<0402> LxW [mm] 16(1C) Rated Volt. [Vdc] Capacitance 220pF(221) 10%(K) 330pF(331) 10%(K) 470pF(471) 10%(K) 680pF(681) 10%(K) 1000pF(102) 10%(K) 1500pF(152) 10%(K) 2200pF(222) 10%(K) 3300pF(332) 10%(K) 4700pF(472) 10%(K) 6800pF(682) 10%(K) 10000pF(103) 10%(K) 1.6x0.8(18)<0603> 16(1C) Rated Volt. [Vdc] 1.0F(105) Tolerance 10%(K) 10(1A) Part Number GRM185R61C105KE44D* GRM185R61A105KE36D* 100(2A) 50(1H) 2.0x1.25(21)<0805> LxW [mm] Rated Volt. [Vdc] Capacitance 16(1C) Part Number LxW [mm] Capacitance 25(1E) Tolerance Tolerance 25(1E) 6800pF(682) 10%(K) 33000pF(333) 10%(K) 68000pF(683) 10%(K) 0.22F(224) 10%(K) 0.33F(334) 10%(K) 0.47F(474) 10%(K) 0.68F(684) 10%(K) 1.0F(105) 10%(K) GRM216R61E105KA12D 2.2F(225) 10%(K) GRM219R61E225KA12D* 4.7F(475) 10%(K) GRM219R61C225KA88D* GRM219R61C475KE15D* 2.0x1.25(21)<0805> LxW [mm] 10(1A) Rated Volt. [Vdc] Capacitance 16(1C) Part Number Tolerance 6.3(0J) 4(0G) Part Number 4.7F(475) 10%(K) GRM219R61A475KE34D* 10F(106) 10%(K) GRM219R61A106KE44D* 22F(226) 20%(M) GRM219R60J106KE19D* GRM219R60G226ME66D* The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code : Please refer to X7R(R7) etc Characteristics. *: Please refer to GRM Series Specifications and Test Method(2). 49 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 1 High Dielectric Constant Type X5R(R6) Characteristics Low Profile 3.2x1.6(31)<1206> LxW [mm] 100(2A) Rated Volt. [Vdc] Capacitance 50(1H) Tolerance 25(1E) 15000pF(153) 10%(K) 22000pF(223) 10%(K) 33000pF(333) 10%(K) 47000pF(473) 10%(K) 68000pF(683) 10%(K) 0.10F(104) 10%(K) 0.15F(154) 10%(K) 0.22F(224) 10%(K) 0.33F(334) 10%(K) 0.47F(474) 10%(K) 0.68F(684) 10%(K) 1.0F(105) 10%(K) 2.2F(225) 10%(K) GRM316R61E225KA12D* 4.7F(475) 10%(K) GRM319R61E475KA12D* 10F(106) 10%(K) 3.2x1.6(31)<1206> 10(1A) Rated Volt. [Vdc] Tolerance Part Number 10%(K) 10F(106) GRM319R61A106KE19D* 3.2x2.5(32)<1210> LxW [mm] 100(2A) Rated Volt. [Vdc] Capacitance GRM319R61C475KA88D* GRM319R61C106KE15D* LxW [mm] Capacitance 16(1C) Part Number 50(1H) Tolerance 0.68F(684) 10%(K) 1.0F(105) 10%(K) 10F(106) 10%(K) 25(1E) Part Number GRM32DR61E106KA12L The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code : Please refer to X7R(R7) etc Characteristics. *: Please refer to GRM Series Specifications and Test Method(2). qProduct ID wSeries tTemperature Characteristics u i o !0 iCapacitance Tolerance q w e r t y Packaging Code in Part Number is a code shows STD 180mm Reel Taping. (Part Number) GR 50 M 31 6 R6 1E 225 K A12 D eDimension (LxW) yRated Voltage oIndividual Specification Code rDimension (T) uCapacitance !0Packaging PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. GRM Series Specifications and Test (1) (Note1) Typical Inspection GRM Series Specifications andMethods Test Methods (1) (Note1) Typical Inspection (Note1) This Specifications and Test Methods indicates typical inspection. Please refer to individual specifications (our product specifications or the approval sheet). In case Non "*" is added in PNs table, please refer to GRM Series Specifications and Test Methods (1). In case "*" is added in PNs table, please refer to GRM Series Specifications and Test Methods (2). No. 1 Item Operating Temperature Range Specifications Temperature High Dielectric Type Compensating Type -55 to +125C (2P/R/S/T, 3P/R/S/T/U, 4P/R/S/T/U: -25 to +85C) B1, B3, F1: -25 to +85C R1, R7: -55 to +125C R6: -55 to +85C C8: -55 to +105C E4: +10 to +85C F5: -30 to +85C Test Method Reference temperature: 25C (2, 3, 4, B1, B3, F1, R1: 20C) 2 Rated Voltage See the previous pages. The rated voltage is defined as the maximum voltage which may be applied continuously to the capacitor. When AC voltage is superimposed on DC voltage, VP-P or VO-P, whichever is larger, should be maintained within the rated voltage range. 3 Appearance No defects or abnormalities Visual inspection 4 Dimensions Within the specified dimensions Using calipers (GRM02 size is based on Microscope) No defects or abnormalities No failure should be observed when 300%* of the rated voltage (temperature compensating type) or 250% of the rated voltage (high dielectric constant type) is applied between the terminations for 1 to 5 seconds, provided the charge/discharge current is less than 50mA. *200% for 500V 5 Dielectric Strength 6 Insulation Resistance 7 8 Capacitance Q/ Dissipation Factor (D.F.) CV0.047F: More than 10,000M CG0.047F: More than 500 * F C: Nominal Capacitance The insulation resistance should be measured with a DC voltage not exceeding the rated voltage at 20/25C and 75%RH max. and within 2 minutes of charging, provided the charge/ discharge current is less than 50mA. Within the specified tolerance 30pF and over: QU1000 30pF and below: QU400+20C C: Nominal Capacitance (pF) [R6, R7, C8] W.V.: 100V : 0.025 max. (CF0.068F) : 0.05 max. (CU0.068F) W.V.: 50/35/25V: : 0.025 max.* *GRM32D R7/R6/C8 1E106: 0.035 max. W.V.: 16/10V: 0.035 max. W.V.: 6.3/4V : 0.05 max. (CF3.3F) : 0.1 max. (CU3.3F) [E4] W.V.: 25Vmin: 0.025 max. [F1, F5] W.V.: 25V min. : 0.05 max. (CF0.1F) : 0.09 max. (CU0.1F) W.V.: 16/10V: 0.125 max. W.V.: 6.3V: 0.15 max. The capacitance/Q/D.F. should be measured at 20/25C at the frequency and voltage shown in the table. Char. Item C to 7U, 1X C (more than to 7U, 1X R6, R7, F5 1000pF) (1000pF and (C>10F) R6, R7, C8, below) F5, B1, B3, F1 Frequency 10.1MHz Voltage 0.5 to 5Vrms 10.1kHz 10.2Vrms E4 12024kHz 10.1kHz 0.5 0.5 0.1Vrms 0.05Vrms Continued on the following page. 51 1 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. GRM Series Specifications andMethods Test Methods (1) (Note1) Typical Inspection GRM Series Specifications and Test (1) (Note1) Typical Inspection Continued from the preceding page. No. Item No bias (Note1) This Specifications and Test Methods indicates typical inspection. Please refer to individual specifications (our product specifications or the approval sheet). In case Non "*" is added in PNs table, please refer to GRM Series Specifications and Test Methods (1). In case "*" is added in PNs table, please refer to GRM Series Specifications and Test Methods (2). Specifications Temperature High Dielectric Type Compensating Type Within the specified tolerance (Table A-1) B1, B3: Within 10% (-25 to +85C) R1, R7: Within 15% (-55 to +125C) R6: Within 15% (-55 to +85C) E4: Within +22/-56% (+10 to +85C) F1: Within +30/-80% (-25 to +85C) F5: Within +22/-82% (-30 to +85C) C8: Within 22% (-55 to +105C) Test Method The capacitance change should be measured after 5 min. at each specified temp. stage. (1)Temperature Compensating Type The temperature coefficient is determined using the capacitance measured in step 3 as a reference. When cycling the temperature sequentially from step 1 through 5 (5C: +25 to +125C/C: +20 to +125C: other temp. coeffs.: +25 to +85C/+20 to +85C) the capacitance should be within the specified tolerance for the temperature coefficient and capacitance change as Table A-1. The capacitance drift is calculated by dividing the differences between the maximum and minimum measured values in the step 1, 3 and 5 by the cap. value in step 3. Step 1 B1: Within +10/-30% R1: Within +15/-40% F1: Within +30/-95% 50% of the Rated Voltage 2 3 4 9 5 Capacitance Temperature Characteristics Within 0.2% or 0.05pF Capacitance (Whichever is larger.) Drift *Do not apply to 1X/25V *Initial measurement for high dielectric constant type Perform a heat treatment at 150+0/-10C for one hour and then set for 242 hours at room temperature. Perform the initial measurement. Step 1 2 3 5 6 7 8 No removal of the terminations or other defect should occur. c Temperature (C) Reference Temperature 2 -553 (for C to 7U/R6/R7/C8) -303 (for F5), 103 (for E4) -253 (for other TC) Reference Temperature 2 1253 (for C/R7), 1053 (for C8) 853 (for other TC) Reference Temperature 2 (2) High Dielectric Constant Type The ranges of capacitance change compared with the Reference Temperature value over the temperature ranges shown in the table should be within the specified ranges.* In case of applying voltage, the capacitance change should be measured after 1 more min. with applying voltage in equilibration of each temp. stage. 4 Temperature (C) Applying Voltage (V) Reference Temperature 2 -553 (for C8, R1, R7, R6) -253 (for B1, B3, F1) -303 (for F5)/103 (for E4) No bias Reference Temperature 2 1253 (for R1, R7)/ 853 (for B1, B3, R6 F1, F5, E4)/1053 (for C8) Reference Temperature 2 -553 (for R1)/ -253 (for B1, F1) 50% of the rated voltage Reference Temperature 2 1253 (for R1)/ 853 (for B1, F1) Solder the capacitor to the test jig (glass epoxy board) shown in Fig. 1a using an eutectic solder. Then apply 10N* force in parallel with the test jig for 101 sec. The soldering should be done either with an iron or using the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock. *1N (GRM02), 2N (GRM03), 5N (GRM15, GRM18) (in mm) a Adhesive Strength 10 of Termination b 1 Solder resist Baked electrode or copper foil Fig. 1a Type GRM02 GRM03 GRM15 GRM18 GRM21 GRM31 GRM32 GRM43 GRM55 a 0.2 0.3 0.4 1.0 1.2 2.2 2.2 3.5 4.5 b 0.56 0.9 1.5 3.0 4.0 5.0 5.0 7.0 8.0 c 0.23 0.3 0.5 1.2 1.65 2.0 2.9 3.7 5.6 Continued on the following page. 52 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. GRM Series Specifications and Test (1) (Note1) Typical Inspection GRM Series Specifications andMethods Test Methods (1) (Note1) Typical Inspection Continued from the preceding page. 11 Item Specifications Temperature High Dielectric Type Compensating Type Appearance No defects or abnormalities Capacitance Within the specified tolerance Vibration Resistance Q/D.F. [B1, B3, R6, R7, C8] W.V.: 100V : 0.025 max. (CF0.068F) : 0.05 max. (CU0.068F) W.V.: 50/35/25V: : 0.025 max.* *GRM32D R7/R6/C8 1E106: 0.035 max. W.V.: 16/10V: 0.035 max. W.V.: 6.3/4V : 0.05 max. (CF3.3F) : 0.1 max. (CU3.3F) [E4] W.V.: 25Vmin: 0.025 max. [F1, F5] W.V.: 25V min. : 0.05 max. (CF0.1F) : 0.09 max. (CU0.1F) W.V.: 16/10V: 0.125 max. W.V.: 6.3V: 0.15 max. 30pF and over: QU1000 30pF and below: QU400+20C C: Nominal Capacitance (pF) Appearance No marking defects Capacitance Change Within 5% or 0.5pF (Whichever is larger) Within 10% Test Method Solder the capacitor on the test jig (glass epoxy board) in the same manner and under the same conditions as (10). The capacitor should be subjected to a simple harmonic motion having a total amplitude of 1.5mm, the frequency being varied uniformly between the approximate limits of 10 and 55Hz. The frequency range, from 10 to 55Hz and return to 10Hz, should be traversed in approximately 1 minute. This motion should be applied for a period of 2 hours in each of 3 mutually perpendicular directions (total of 6 hours). Solder the capacitor on the test jig (glass epoxy board) shown in Fig. 2a using an eutectic solder. Then apply a force in the direction shown in Fig. 3a for 51 sec. The soldering should be done by the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock. SWT(c)\X,QRU|SVYZW VZ[_(R)]^ No. (Note1) This Specifications and Test Methods indicates typical inspection. Please refer to individual specifications (our product specifications or the approval sheet). In case Non "*" is added in PNs table, please refer to GRM Series Specifications and Test Methods (1). In case "*" is added in PNs table, please refer to GRM Series Specifications and Test Methods (2). b 40 4.5 c 20 12 Deflection 50 Pressurizing speed : 1.0mm/sec. Pressurize R230 a 100 Fig. 2a t: 1.6mm (GRM02/03/15: t: 0.8mm) Flexure : V1 Capacitance meter 45 45 Fig. 3a Type GRM02 GRM03 GRM15 GRM18 GRM21 GRM31 GRM32 GRM43 GRM55 a 0.2 0.3 0.4 1.0 1.2 2.2 2.2 3.5 4.5 b 0.56 0.9 1.5 3.0 4.0 5.0 5.0 7.0 8.0 c 0.23 0.3 0.5 1.2 1.65 2.0 2.9 3.7 5.6 (in mm) 13 Solderability of Termination 75% of the terminations are to be soldered evenly and continuously. Immerse the capacitor in a solution of ethanol (JIS-K-8101) and rosin (JIS-K-5902) (25% rosin in weight proportion). Preheat at 80 to 120C for 10 to 30 seconds. After preheating, immerse in an eutectic solder solution for 20.5 seconds at 2305C or Sn-3.0Ag-0.5Cu solder solution for 20.5 seconds at 2455C. Continued on the following page. 53 1 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 1 GRM Series Specifications andMethods Test Methods (1) (Note1) Typical Inspection GRM Series Specifications and Test (1) (Note1) Typical Inspection Continued from the preceding page. No. Item (Note1) This Specifications and Test Methods indicates typical inspection. Please refer to individual specifications (our product specifications or the approval sheet). In case Non "*" is added in PNs table, please refer to GRM Series Specifications and Test Methods (1). In case "*" is added in PNs table, please refer to GRM Series Specifications and Test Methods (2). Specifications Temperature High Dielectric Type Compensating Type Test Method The measured and observed characteristics should satisfy the specifications in the following table. Appearance No defects or abnormalities Capacitance Change Within 2.5% or 0.25pF (Whichever is larger) Resistance to 14 Soldering Heat Q/D.F. 30pF and over: QU1000 30pF and below: QU400+20C C: Nominal Capacitance (pF) B1, B3, R1, R6, R7, C8 : Within 7.5% F1, F5, E4: Within 20% [B1, B3, R6, R7, C8] W.V.: 100V : 0.025 max. (CF0.068F) : 0.05 max. (CU0.068F) W.V.: 50/35/25V: : 0.025 max.* *GRM32D R7/R6/C8 1E106: 0.035 max. W.V.: 16/10V: 0.035 max. W.V.: 6.3/4V : 0.05 max. (CF3.3F) : 0.1 max. (CU3.3F) [E4] W.V.: 25Vmin: 0.025 max. [F1, F5] W.V.: 25V min. : 0.05 max. (CF0.1F) : 0.09 max. (CU0.1F) W.V.: 16/10V: 0.125 max. W.V.: 6.3V: 0.15 max. I.R. More than 10,000M or 500 * F (Whichever is smaller) Dielectric Strength No defects Preheat the capacitor at 120 to 150C for 1 minute. Immerse the capacitor in an eutectic solder or Sn-3.0Ag-0.5Cu solder solution at 2705C for 100.5 seconds. Set at room temperature for 242 hours, then measure. *Initial measurement for high dielectric constant type Perform a heat treatment at 150+0/-10C for one hour and then set at room temperature for 242 hours. Perform the initial measurement. *Preheating for GRM32/43/55 Step 1 2 Temperature 100 to 120C 170 to 200C Time 1 min. 1 min. The measured and observed characteristics should satisfy the specifications in the following table. Appearance No defects or abnormalities Capacitance Change Within 2.5% or 0.25pF (Whichever is larger) Temperature 15 Cycle Q/D.F. 30pF and over: QU1000 30pF and below: QU400+20C C: Nominal Capacitance (pF) B1, B3, R1, R6, R7, C8 : Within 7.5% F1, F5, E4: Within 20% [B1, B3, R6, R7, C8] W.V.: 100V : 0.025 max. (CF0.068F) : 0.05 max. (CU0.068F) W.V.: 50/35/25V: : 0.025 max.* *GRM32D R7/R6/C8 1E106: 0.035 max. W.V.: 16/10V: 0.035 max. W.V.: 6.3/4V : 0.05 max. (CF3.3F) : 0.1 max. (CU3.3F) [E4] W.V.: 25Vmin: 0.05 max. [F1, F5] W.V.: 25V min. : 0.05 max. (CF0.1F) : 0.09 max. (CU0.1F) W.V.: 16/10V: 0.125 max. W.V.: 6.3V: 0.15 max. I.R. More than 10,000M or 500 * F (Whichever is smaller) Dielectric Strength No defects Fix the capacitor to the supporting jig in the same manner and under the same conditions as (10). Perform the five cycles according to the four heat treatments shown in the following table. Set for 242 hours at room temperature, then measure. Step 1 2 3 4 Min. Max. Room Room Temp. (C) Operating Operating Temp. Temp. Temp. +0/-3 Temp. +3/-0 Time (min.) 2 to 3 2 to 3 303 303 *Initial measurement for high dielectric constant type Perform a heat treatment at 150+0/-10C for one hour and then set at room temperature for 242 hours. Perform the initial measurement. Continued on the following page. 54 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. GRM Series Specifications and Test (1) (Note1) Typical Inspection GRM Series Specifications andMethods Test Methods (1) (Note1) Typical Inspection Continued from the preceding page. No. Item (Note1) This Specifications and Test Methods indicates typical inspection. Please refer to individual specifications (our product specifications or the approval sheet). In case Non "*" is added in PNs table, please refer to GRM Series Specifications and Test Methods (1). In case "*" is added in PNs table, please refer to GRM Series Specifications and Test Methods (2). Specifications Temperature High Dielectric Type Compensating Type Test Method The measured and observed characteristics should satisfy the specifications in the following table. Appearance No defects or abnormalities Capacitance Change Within 5% or 0.5pF (Whichever is larger) Humidity 16 (Steady State) Q/D.F. 30pF and over: QU350 10pF and over 30pF and below: QU275+2.5C 10pF and below: QU200+10C C: Nominal Capacitance (pF) I.R. B1, B3, R1, R6, R7, C8 : Within 12.5% F1, F5, E4: Within 30% [R6, R7, C8] W.V.: 100V : 0.05 max. (CF0.068F) : 0.075 max. (CU0.068F) W.V.: 50/35/25/16/10V : 0.05 max. W.V.: 6.3/4V : 0.075 max. (CF3.3F) : 0.125 max. (CU3.3F) [E4] W.V.: 25Vmin: 0.05 max. [F1, F5] W.V.: 25V min. : 0.075 max. (CF0.1F) : 0.125 max. (CU0.1F) W.V.: 16/10V: 0.15 max. W.V.: 6.3V: 0.2 max. Set the capacitor at 402C and in 90 to 95% humidity for 50012 hours. Remove and set for 242 hours at room temperature, then measure. More than 1,000M or 50 * F (Whichever is smaller) The measured and observed characteristics should satisfy the specifications in the following table. 17 Appearance No defects or abnormalities Capacitance Change Within 7.5% or 0.75pF (Whichever is larger) Humidity Load Q/D.F. 30pF and over: QU200 30pF and below: QU100+10C/3 C: Nominal Capacitance (pF) I.R. B1, B3, R1, R6, R7, C8 : Within 12.5% F1, F5, E4: Within 30% [W.V.: 10V max.] F1, F5: Within +30/-40% [B1, B3, R6, R7, C8] W.V.: 100V : 0.05 max. (CF0.068F) : 0.075 max. (CU0.068F) W.V.: 50/35/25/16/10V : 0.05 max. W.V.: 6.3/4V : 0.075 max. (CF3.3F) : 0.125 max. (CU3.3F) [E4] W.V.: 25Vmin: 0.05 max. [F1, F5] W.V.: 25V min. : 0.075 max. (CF0.1F) : 0.125 max. (CU0.1F) W.V.: 16/10V: 0.15 max. W.V.: 6.3V: 0.2 max. Apply the rated voltage at 402C and 90 to 95% humidity for 50012 hours. Remove and set for 242 hours at room temperature, then measure. The charge/discharge current is less than 50mA. *Initial measurement for F1, F5/10V max. Apply the rated DC voltage for 1 hour at 402C. Remove and set for 242 hours at room temperature. Perform initial measurement. More than 500M or 25 * F (Whichever is smaller) Continued on the following page. 55 1 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 1 GRM Series Specifications andMethods Test Methods (1) (Note1) Typical Inspection GRM Series Specifications and Test (1) (Note1) Typical Inspection Continued from the preceding page. No. (Note1) This Specifications and Test Methods indicates typical inspection. Please refer to individual specifications (our product specifications or the approval sheet). In case Non "*" is added in PNs table, please refer to GRM Series Specifications and Test Methods (1). In case "*" is added in PNs table, please refer to GRM Series Specifications and Test Methods (2). Specifications Temperature High Dielectric Type Compensating Type Item Test Method The measured and observed characteristics should satisfy the specifications in the following table. Appearance Capacitance Change High 18 Temperature Load Q/D.F. No defects or abnormalities Within 3% or 0.3pF (Whichever is larger) 30pF and over: QU350 10pF and over 30pF and below: QU275+2.5C 10pF and below: QU200+10C C: Nominal Capacitance (pF) I.R. B1, B3, R1, R6, R7, C8 : Within 12.5% F1, F5, E4: Within 30% [Except 10V max. and. CU1.0F] F1, F5: Within +30/-40% [10V max. and CU1.0F] [B1, B3, R6, R7, C8] W.V.: 100V : 0.05 max. (CF0.068F) : 0.075 max. (CU0.068F) W.V.: 50/35/25/16/10V : 0.05 max. W.V.: 6.3/4V : 0.075 max. (CF3.3F) : 0.125 max. (CU3.3F) [E4] W.V.: 25Vmin: 0.05 max. [F1, F5] W.V.: 25V min. : 0.075 max.(CF0.1F) : 0.125 max.(CU0.1F) W.V.: 16/10V: 0.15 max. W.V.: 6.3V: 0.2 max. Apply 200%* of the rated voltage at the maximum operating temperature 3C for 100012 hours. Set for 242 hours at room temperature, then measure. The charge/discharge current is less than 50mA. *Initial measurement for high dielectric constant type. Apply 200% of the rated voltage* at the maximum operating temperature 3C for one hour. Remove and set for 242 hours at room temperature. Perform initial measurement. *GRM155C81E 683/104, GRM21BR71H105, GRM21BR72A474, GRM21BR71C225, GRM31CR71H475, GRM32E R6/R7 YA106, GRM32D R7/R6/C8 1E106: 150% of the rated voltage. More than 1,000M or 50 * F (Whichever is smaller) Table A-1 (1) Char. 5C 6C 6P 6R 6S 6T 7U 1X Nominal Values (ppm/C)*1 0 30 0 60 -150 60 -220 60 -330 60 -470 60 -750120 +350 to -1000 -55 Max. 0.58 0.87 2.33 3.02 4.09 5.46 8.78 - Min. -0.24 -0.48 0.72 1.28 2.16 3.28 5.04 - Capacitance Change from 25C (%) -30 Max. Min. 0.40 -0.17 0.59 -0.33 1.61 0.50 2.08 0.88 2.81 1.49 3.75 2.26 6.04 3.47 - - -10 Max. 0.25 0.38 1.02 1.32 1.79 2.39 3.84 - Min. -0.11 -0.21 0.32 0.56 0.95 1.44 2.21 - *1: Nominal values denote the temperature coefficient within a range of 25C to 125C (for C)/85C (for other TC). (2) Char. 2C 3C 4C 2P 3P 4P 2R 3R 4R 2S 3S 4S 2T 3T 4T 3U 4U Nominal Values (ppm/C)*2 0 60 0120 0250 -150 60 -150120 -150250 -220 60 -220120 -220250 -330 60 -330120 -330250 -470 60 -470120 -470250 -750120 -750250 -55 Max. 0.82 1.37 2.56 - - - - - - - - - - - - - - Min. -0.45 -0.90 -1.88 - - - - - - - - - - - - - - Capacitance Change from 20C (%) -25 Max. Min. 0.49 -0.27 0.82 -0.54 1.54 -1.13 1.32 0.41 1.65 0.14 2.36 -0.45 1.70 0.72 2.03 0.45 2.74 -0.14 2.30 1.22 2.63 0.95 3.35 0.36 3.07 1.85 3.40 1.58 4.12 0.99 4.94 2.84 5.65 2.25 *2: Nominal values denote the temperature coefficient within a range of 20C to 125C (for C)/85C (for other TC). 56 -10 Max. 0.33 0.55 1.02 0.88 1.10 1.57 1.13 1.35 1.83 1.54 1.76 2.23 2.05 2.27 2.74 3.29 3.77 Min. -0.18 -0.36 -0.75 0.27 0.09 -0.30 0.48 0.30 -0.09 0.81 0.63 0.24 1.23 1.05 0.66 1.89 1.50 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. GRM Series Specifications and Test (2) (Note1) Typical Inspection GRM Series Specifications andMethods Test Methods (2) (Note1) Typical Inspection (Note1) This Specifications and Test Methods indicates typical inspection. Please refer to individual specifications (our product specifications or the approval sheet). In case Non "*" is added in PNs table, please refer to GRM Series Specifications and Test Methods (1). In case "*" is added in PNs table, please refer to GRM Series Specifications and Test Methods (2). No. 1 Item Operating Temperature Range Specifications Test Method B1, B3, F1: -25 to +85C R1, R7, C7, D7, E7: -55 to +125C C6, R6: -55 to +85C F5: -30 to +85C C8, D8: -55 to +105C, Reference temperature: 25C (B1, B3, R1, F1: 20C) 2 Rated Voltage See the previous pages. The rated voltage is defined as the maximum voltage which may be applied continuously to the capacitor. When AC voltage is superimposed on DC voltage, VP-P or VO-P, whichever is larger, should be maintained within the rated voltage range. 3 Appearance No defects or abnormalities Visual inspection 4 Dimensions Within the specified dimensions Using calipers (GRM02 size is based on Microscope) 5 Dielectric Strength No defects or abnormalities No failure should be observed when 250% of the rated voltage is applied between the terminations for 1 to 5 seconds, provided the charge/discharge current is less than 50mA. 6 Insulation Resistance More than 50 * F The insulation resistance should be measured with a DC voltage not exceeding the rated voltage at reference temperature and 75%RH max. and within 1 minutes of charging, provided the charge/discharge current is less than 50mA. Capacitance Within the specified tolerance *Table 1 GRM155 B3/R6 GRM185 B3/R6 GRM185 C8/D7 GRM188 B3/R6 GRM188 R7/C8 GRM188 B3/R6 GRM219 B3/R6 GRM219 C8 GRM21B B3/R6 GRM21B R7/C8 GRM319 B3/R6 7 8 Dissipation Factor (D.F.) No bias 1A 124 to 105 1C/1A 105 1A 105 1C/1A 225 1A 225 1A 335 1C/1A 475, 106 1A 475 1C/1A 106 1A 106 1C/1A 106 B1, B3, R1, R6*, R7*, C7, C8, E7, D7: 0.1 max. C6: 0.125 max. D8: 0.15 max. F1, F5: 0.2 max. *GRM31CR71E106: 0.125 max. GRM31CR6 0J/0G 107: 0.15 max. B1, B3 F1 R6 R1, R7 F5 C6 C7 C8 D7 E7 D8 : Within 10% (-25 to +85C) : Within +30/-80% (-25 to +85C) : Within 15% (-55 to +85C) : Within 15% (-55 to +125C) : Within +22/-82% (-30 to +85C) : Within 22% (-55 to +85C) : Within 22% (-55 to +125C) : Within 22% (-55 to +105C) : Within +22/-33% (-55 to +125C) : Within +22/-56% (-55 to +125C) : Within +22/-33% (-55 to +105C) The capacitance/D.F. should be measured at reference temperature at the measuring frequency and voltage shown in the table. Nominal Capacitance Measuring Frequency Measuring Voltage CV10F (10V min.)* 10.1kHz 1.00.2Vrms CV10F (6.3V max.) 10.1kHz 0.50.1Vrms CG10F 12024Hz 0.50.1Vrms *For items in Table1 10.1kHz 0.50.1Vrms GRM188C80E106: Perform a heat treatment at 150+0/-10C for one hour and then set for 242 hours at room temperature. The capacitance change should be measured after 5 min. at each specified temp. stage. The ranges of capacitance change compared with the reference temperature value over the temperature ranges shown in the table should be within the specified ranges.* In case of applying voltage, the capacitance change should be measured after 1 more min. with applying voltage in equilibration of each temp. stage. *GRM32DR60J226, GRM43 B1/B3/R6 0J/1A 336/476 only: 1.00.2Vrms Step 1 9 2 Capacitance Temperature Characteristics 3 4 50% of B1: Within +10/-30% the Rated R1: Within +15/-40% Voltage F1: Within +30/-95% 5 6 7 8 Temperature (C) Applying Voltage (V) 252 (for R6, R7, C6, C7, C8, D7, D8, E7, F5) 202 (for B1, B3, F1, R1) -553 (for R1, R6, R7, C6, C7, C8, D7, D8, E7) -303 (for F5) -253 (for B1, B3, F1) No bias 252 (for R6, R7, C6, C7, C8, D7, D8, E7, F5) 202 (for B1, B3, F1, R1) 1253 (for R1, R7, C7, D7, E7) 1053 (for C8, D8) 853 (for B1, B3, F1, F5, R6, C6) 202 (for B1, F1, R1) -553 (for R1) -253 (for B1, F1) 50% of the rated voltage 202 (for B1, F1, R1) 1253 (for R1) 853 (for B1, F1) *Initial measurement for high dielectric constant type Perform a heat treatment at 150 +0/-10C for one hour and then set for 242 hours at room temperature. Perform the initial measurement. Continued on the following page. 57 1 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. GRM Series Specifications andMethods Test Methods (2) (Note1) Typical Inspection GRM Series Specifications and Test (2) (Note1) Typical Inspection Continued from the preceding page. No. (Note1) This Specifications and Test Methods indicates typical inspection. Please refer to individual specifications (our product specifications or the approval sheet). In case Non "*" is added in PNs table, please refer to GRM Series Specifications and Test Methods (1). In case "*" is added in PNs table, please refer to GRM Series Specifications and Test Methods (2). Item Specifications Test Method No removal of the terminations or other defects should occur. c Adhesive Strength of Termination a 10 b Solder resist Baked electrode or copper foil Fig. 1a Appearance No defects or abnormalities Capacitance Within the specified tolerance D.F. B1, B3, R1, R6*, R7*, C7, C8, E7, D7: 0.1 max. C6: 0.125 max. D8: 0.15 max. F1, F5: 0.2 max. *GRM31CR71E106: 0.125 max. GRM31CR6 0J/0G 107: 0.15 max. Appearance No marking defects Capacitance Change Within 10% 11 Vibration Solder the capacitor on the test jig (glass epoxy board) shown in Fig. 1a using an eutectic solder. Then apply 10N* force in parallel with the test jig for 101sec. The soldering should be done either with an iron or using the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock. *1N: GRM02, 2N: GRM03, 5N: GRM15/GRM18 Type GRM02 GRM03 GRM15 GRM18 GRM21 GRM31 GRM32 GRM43 GRM55 a 0.2 0.3 0.4 1.0 1.2 2.2 2.2 3.5 4.5 b 0.56 0.9 1.5 3.0 4.0 5.0 5.0 7.0 8.0 c 0.23 0.3 0.5 1.2 1.65 2.0 2.9 3.7 5.6 Solder the capacitor on the test jig (glass epoxy board) in the same manner and under the same conditions as (10). The capacitor should be subjected to a simple harmonic motion having a total amplitude of 1.5mm, the frequency being varied uniformly between the approximate limits of 10 and 55Hz. The frequency range, from 10 to 55Hz and return to 10Hz, should be traversed in approximately 1 minute. This motion should be applied for a period of 2 hours in each of 3 mutually perpendicular directions (total of 6 hours). Solder the capacitor on the test jig (glass epoxy board) shown in Fig. 2a using an eutectic solder. Then apply a force in the direction shown in Fig. 3a for 51 sec. The soldering should be done by the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock. W T S R [\]^(R)_T(c)X|,QUVZ(R)]Y^Q, b o4.5 20 c 50 Pressurizing speed : 1.0mm/sec. Pressurize R230 40 1 a 100 12 Deflection t: 1.6mm Fig. 2a Flexure : V1 Capacitance meter 45 45 Fig.3a (GRM02/03/15: t: 0.8mm) Type GRM02 GRM03 GRM15 GRM18 GRM21 GRM31 GRM32 GRM43 GRM55 a 0.2 0.3 0.4 1.0 1.2 2.2 2.2 3.5 4.5 b 0.56 0.9 1.5 3.0 4.0 5.0 5.0 7.0 8.0 c 0.23 0.3 0.5 1.2 1.65 2.0 2.9 3.7 5.6 (in mm) 13 Solderability of Termination 75% of the terminations is to be soldered evenly and continuously. Immerse the capacitor in a solution of ethanol (JIS-K-8101) and rosin (JIS-K-5902) (25% rosin in weight proportion). Preheat at 80 to 120C for 10 to 30 seconds. After preheating, immerse in an eutectic solder solution for 20.5 seconds at 2305C or Sn-3.0Ag-0.5Cu solder solution for 20.5 seconds at 2455C. Continued on the following page. 58 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. GRM Series Specifications and Test (2) (Note1) Typical Inspection GRM Series Specifications andMethods Test Methods (2) (Note1) Typical Inspection Continued from the preceding page. No. 14 Item High Temperature 16 High Humidity (Steady) 17 Durability Specifications Appearance No defects or abnormalities Capacitance Change B1, B3, R1, R6*, R7, C6, C7, C8*, E7, D7, D8: Within 7.5% F1, F5: Within 20% *GRM188R6 0J/0G 106, GRM188C80E106, GRM219R60G226: within 12.5% GRM155R60G475: Within 15% Resistance to Soldering D.F. Heat Temperature 15 Sudden Change (Note1) This Specifications and Test Methods indicates typical inspection. Please refer to individual specifications (our product specifications or the approval sheet). In case Non "*" is added in PNs table, please refer to GRM Series Specifications and Test Methods (1). In case "*" is added in PNs table, please refer to GRM Series Specifications and Test Methods (2). B1, B3, R1, R6*, R7*, C7, C8, E7, D7: 0.1 max. C6: 0.125 max. D8: 0.15 max. F1, F5: 0.2 max. *GRM31CR71E106: 0.125 max. GRM31CR6 0J/0G 107: 0.15 max. Test Method Preheat the capacitor at 120 to 150C for 1 minute. Immerse the capacitor in an eutectic solder* or Sn-3.0Ag-0.5Cu solder solution at 2705C for 100.5 seconds. Set at room temperature for 242 hours, then measure. *Do not apply to GRM02. *Initial measurement for high dielectric constant type Perform a heat treatment at 150+0/-10C for one hour and then set at room temperature for 242 hours. Perform the initial measurement. *Preheating for GRM32/43/55 Step 1 2 Temperature 100 to 120C 170 to 200C Time 1 min. 1 min. I.R. More than 50 * F Dielectric Strength No defects Appearance No defects or abnormalities Capacitance Change B1, B3, R1, R6, R7, C6, C7, C8, D7, D8: Within 7.5% E7: Within 30% F1, F5: Within 20% D.F. B1, B3, R1, R6*, R7*, C7, C8, E7, D7: 0.1 max. C6: 0.125 max. D8: 0.15 max. F1, F5: 0.2 max. *GRM31CR71E106: 0.125 max. GRM31CR6 0J/0G 107: 0.15 max. I.R. More than 50 * F Dielectric Strength No defects Appearance No defects or abnormalities Capacitance Change B1, B3, R1, R6, R7, C6, C7, C8, E7, D7, D8: Within 12.5% F1, F5: Within 30% D.F. B1, B3, R1, R6, R7, C6, C7, C8, E7, D7, D8: 0.2 max. F1, F5: 0.4 max. I.R. More than 12.5 * F Appearance No defects or abnormalities Capacitance Change B1, B3, R1, R6*, R7, C6, C7, C8*, E7, D7, D8: Within 12.5% F1, F5: Within 30% *GRM188C80E106, GRM219R60G226: within 15% D.F. B1, B3, R1, R6, R7, C6, C7, C8, E7, D7, D8: 0.2 max. F1, F5: 0.4 max. *Initial measurement Perform a heat treatment at 150+0/-10C for one hour and then let sit for 242 hours at room temperature. Perform the initial measurement. I.R. More than 25 * F *Measurement after test Perform a heat treatment at 150+0/-10C for one hour and then let sit for 242 hours at room temperature, then measure. Fix the capacitor to the supporting jig in the same manner and under the same conditions as (10). Perform the five cycles according to the four heat treatments shown in the following table. Set for 242 hours at room temperature, then measure. Step 1 2 3 4 Min. Max. Room Room Temp. (C) Operating Operating Temp. Temp. Temp. +0/-3 Temp. +3/-0 Time (min.) 2 to 3 2 to 3 303 303 *Initial measurement for high dielectric constant type Perform a heat treatment at 150+0/-10C for one hour and then set at room temperature for 242 hours. Perform the initial measurement. GRM188R60J106 only Measurement after test Perform a heat treatment and then let sit for 242 hours at room temperature, then measure. Apply the rated voltage at 402C and 90 to 95% humidity for 50012 hours. The charge/discharge current is less than 50mA. *Initial measurement Perform a heat treatment at 150+0/-10C for one hour and then let sit for 242 hours at room temperature. Perform the initial measurement. *Measurement after test Perform a heat treatment at 150+0/-10C for one hour and then let sit for 242 hours at room temperature, then measure. Apply 150% of the rated voltage for 100012 hours at the maximum operating temperature 3C. Let sit for 242 hours at room temperature, then measure. The charge/discharge current is less than 50mA. 59 1 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. GRM Series Data Capacitance - Temperature Characteristics Measuring condition: 5C *** 1MHz, R *** 1kHz 20 5C R6 R7 10 Capacitance Change (%) 15 Capacitance Change (%) Capacitance Change - Aging Measuring condition: 5C *** 1MHz, R *** 1kHz 20 10 5 0 -5 -10 0 -10 -20 5C R -30 -15 -20 -60 -40 -40 -20 0 20 40 60 Temperature (C) 80 100 120 10 140 100 1000 10000 Time (Hr) Impedance - Frequency Characteristics 5C: GRM15 R: GRM15 100 100 10 Impedance () Impedance () 10 1 1pF 10pF 1 1000pF 0.1 0.01F 100pF 0.1 0.01 0.1F 1000pF 0.01 1 10 100 Frequency (MHz) 1000 10000 10 100 0.001 0.1 1 10 Frequency (MHz) 100 1000 R 100 GRM15 1F 10 Impedance () 1 1 GRM18 10F 0.1 0.01 0.001 0.01 GRM31 100F 0.1 1 Frequency (MHz) The data herein are given in typical values, not guaranteed ratings. Please refer to our Web site or contact our sales representatives for individual Part Number's data. Our Web Site: http://www.murata.com/products/capacitor/tech_data/index.html 60 Continued on the following page. PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. GRM Series Data GRM Series Data Continued from the preceding page. Capacitance - DC Voltage Characteristics Temperature Compensating Type: GRM1555C1H102JA01 High Dielectric Constant Type: GRM155R71E103KA01 Measuring condition: 1MHz 20 0 Capacitance Change (%) Capacitance Change (%) 0 -20 -40 -60 -80 -40 -60 -100 0 10 20 30 40 DC Voltage (VDC) 50 60 High Dielectric Constant Type: GRM155R71C104KA88 0 2 4 6 8 10 12 14 16 DC Voltage (VDC) 18 20 22 24 26 High Dielectric Constant Type: GRM155R61A105KE15 Measuring condition: 1kHz 20 Measuring condition: 1kHz 20 0 0 Capacitance Change (%) Capacitance Change (%) -20 -80 -100 -20 -40 -60 -20 -40 -60 -80 -80 -100 -100 0 2 4 6 8 10 12 DC Voltage (VDC) 14 16 18 High Dielectric Constant Type: GRM188R60J106ME47 0 1 2 3 4 5 6 7 DC Voltage (VDC) 8 9 10 11 High Dielectric Constant Type: GRM31CR60J107ME39 Measuring condition: 1kHz 20 Measuring condition: 120Hz 20 0 Capacitance Change (%) 0 Capacitance Change (%) Measuring condition: 1kHz 20 -20 -40 -60 -80 -20 -40 -60 -80 -100 -100 0 1 2 3 4 DC Voltage (VDC) 5 6 7 The data herein are given in typical values, not guaranteed ratings. Please refer to our Web site or contact our sales representatives for individual Part Number's data. Our Web Site: http://www.murata.com/products/capacitor/tech_data/index.html 0 1 2 3 4 DC Voltage (VDC) 5 6 7 Continued on the following page. 61 1 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. GRM Series Data Continued from the preceding page. Capacitance - AC Voltage Characteristics Temperature Compensating Type: GRM1555C1H102JA01 10 Capacitance Change (%) Capacitance Change (%) 20 10 0 -10 -20 -30 -20 -30 -40 -50 -50 1.0 1.5 AC Voltage (Vr.m.s.) 2.0 -60 0.0 2.5 High Dielectric Constant Type: GRM155R71C104KA88 10 Capacitance Change (%) 20 10 -10 -20 -30 -30 -50 2.0 -60 0.0 2.5 High Dielectric Constant Type: GRM188R60J106ME47 10 Capacitance Change (%) 20 10 -10 -20 -30 -20 -30 -40 -50 1.0 1.5 AC Voltage (Vr.m.s.) 2.0 2.5 The data herein are given in typical values, not guaranteed ratings. Please refer to our Web site or contact our sales representatives for individual Part Number's data. Our Web Site: http://www.murata.com/products/capacitor/tech_data/index.html 2.5 0 -50 0.5 2.0 -10 -40 -60 0.0 1.0 1.5 AC Voltage (Vr.m.s.) Measuring condition: 120Hz 30 20 0 0.5 High Dielectric Constant Type: GRM31CR60J107ME39 Measuring condition: 1kHz 30 Measuring condition: 1kHz -20 -40 1.0 1.5 AC Voltage (Vr.m.s.) 2.5 0 -50 0.5 2.0 -10 -40 -60 0.0 1.0 1.5 AC Voltage (Vr.m.s.) 30 20 0 0.5 High Dielectric Constant Type: GRM155R61A105KE15 Measuring condition: 1kHz 30 Capacitance Change (%) 0 -10 -40 0.5 Measuring condition: 1kHz 30 20 -60 0.0 62 High Dielectric Constant Type: GRM155R71E103KA01 Measuring condition: 1MHz 30 Capacitance Change (%) 1 -60 0.0 0.5 1.0 1.5 AC Voltage (Vr.m.s.) 2.0 2.5 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Chip Monolithic Ceramic Capacitors Capacitor Array GNM Series 2 Features 1. High density mounting due to mounting space saving 2. Mounting cost saving Applications General electronic equipment GNM0M2/1M2/212 P L Part Number GNM0M2 GNM1M2 GNM212 T T GNM214/314 P W Dimensions (mm) W T P L 0.6 0.05 0.45 0.05 0.45 0.05 0.9 0.05 0.5 +0.05/-0.10 0.6 0.1 0.64 0.05 1.37 0.15 1.0 0.15 0.8 +0/-0.15 0.6 0.1 1.0 0.1 2.0 0.15 1.25 0.15 0.85 0.1 L Part Number L GNM214 2.0 0.15 GNM314 3.2 0.15 Dimensions (mm) W T 0.5 +0.05/-0.1 1.25 0.15 0.6 0.1 0.85 0.1 0.8 0.1 0.85 0.1 1.6 0.15 1.0 0.1 1.15 0.1 W P 0.5 0.05 0.8 0.1 Capacitance Table Temperature Compensating Type C0G(5C) Characteristics 0.6 ex.0.6: T Dimension [mm] LxW 1.37x1.0 2.0x1.25 (1M) (21) [mm] <0504> <0805> 3.2x1.6 (31) <1206> 4(4) Number of Elements 2(2) Rated Voltage [Vdc] 50 (1H) 50 (1H) 100 (2A) 50 (1H) 10pF(100) 0.6 0.6 0.8 0.8 15pF(150) 0.6 0.6 0.8 0.8 22pF(220) 0.6 0.6 0.8 0.8 33pF(330) 0.6 0.6 0.8 0.8 47pF(470) 0.6 0.6 0.8 0.8 Capacitance 68pF(680) 0.6 0.6 0.8 0.8 100pF(101) 0.6 0.6 0.8 0.8 150pF(151) 0.6 0.6 0.8 0.8 220pF(221) 0.6 0.6 330pF(331) 0.8 0.8 The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code Continued on the following page. 63 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Capacitance Table Continued from the preceding page. 2 High Dielectric Constant Type X7R(R7)/X7S(C7) Characteristics 0.6 ex.0.6: T Dimension [mm] 1.37x1.0 (1M) <0504> 2(2) LxW [mm] Number of Elements Rated Voltage [Vdc] 50 (1H) 25 (1E) 16 (1C) TC X7R (R7) X7R (R7) X7R (R7) Capacitance 4(4) 10 (1A) X7R (R7) X7S (C7) 470pF(471) 1000pF(102) 3.2x1.6 (31) <1206> 2.0x1.25 (21) <0805> 50 (1H) 25 (1E) 16 (1C) 50 (1H) 25 (1E) 16 (1C) 6.3 (0J) X7R (R7) X7R (R7) X7R (R7) X7R (R7) X7R (R7) X7R (R7) X7R (R7) 0.6 0.6 0.6 2200pF(222) 0.6 0.6 4700pF(472) 0.6 0.6 10000pF(103) 0.6 0.6 22000pF(223) 0.6 0.6 47000pF(473) 0.6 0.6 0.10F(104) 0.6 0.85 0.6 0.85 0.85 0.85 0.85 1.0 1.0 0.85 1.0F(105) 1.15 The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code High Dielectric Constant Type X5R(R6) Characteristics 0.6 ex.0.6: T Dimension [mm] 0.9x0.6 (0M) <0302> LxW [mm] 1.37x1.0 (1M) <0504> 2(2) Number of Elements 2.0x1.25 (21) <0805> 4(4) Rated Voltage [Vdc] 16 (1C) 10 (1A) 6.3 (0J) 4 (0G) 50 (1H) 25 (1E) 16 (1C) 10 (1A) 6.3 (0J) 16 (1C) 10 (1A) 6.3 (0J) 10 (1A) 6.3 (0J) 16 (1C) 10 (1A) TC X5R (R6) X5R (R6) X5R (R6) X5R (R6) X5R (R6) X5R (R6) X5R (R6) X5R (R6) X5R (R6) X5R (R6) X5R (R6) X5R (R6) X5R (R6) X5R (R6) X5R (R6) X5R (R6) 0.85 0.85 0.85 0.85 Capacitance 1000pF(102) 0.6 2200pF(222) 0.6 4700pF(472) 0.6 10000pF(103) 0.45 0.45 0.45 22000pF(223) 0.45 0.45 0.45 0.6 0.6 47000pF(473) 0.45 0.45 0.45 0.6 0.6 0.10F(104) 0.45 0.45 0.45 0.6 0.6 0.22F(224) 0.8 0.47F(474) 0.85 1.0F(105) 0.45 0.8 2.2F(225) The part number code is shown in ( ) and Unit is shown in [ ]. 0.5 ex.0.5: T Dimension [mm] LxW 1.37x1.0 2.0x1.25 (1M) (21) [mm] <0504> <0805> Number of Elements 2(2) 4(4) Rated Voltage [Vdc] 16 (1C) 16 (1C) TC X7R (R7) X7R (R7) 0.5 0.5 Capacitance 0.10F(104) The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code 0.8 0.8 0.8 0.8 0.85 0.85 0.85 0.85 0.85 < >: EIA [inch] Code High Dielectric Constant Type X7R(R7) Characteristics Low Profile 64 3.2x1.6 (31) <1206> 2.0x1.25 (21) <0805> High Dielectric Constant Type X5R(R6) Characteristics Low Profile 0.5 ex.0.5: T Dimension [mm] LxW [mm] Number of Elements 1.37x1.0 (1M) <0504> 2(2) 2.0x1.25 (21) <0805> 4(4) Rated Voltage [Vdc] 16 (1C) 10 (1A) 16 (1C) TC X5R (R6) X5R (R6) X5R (R6) 0.5 0.5 0.5 Capacitance 1.0F(105) The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Temperature Compensating Type C0G(5C) Characteristics LxW [mm] 1.37x1.0(1M)<0504> 2.0x1.25(21)<0805> 50(1H) 50(1H) Rated Volt. [Vdc] Capacitance 3.2x1.6(31)<1206> 100(2A) Tolerance 2 50(1H) Part Number 10pF(100) 10%(K) GNM1M25C1H100KD01D GNM2145C1H100KD01D GNM3145C2A100KD01D GNM3145C1H100KD01D 15pF(150) 10%(K) GNM1M25C1H150KD01D GNM2145C1H150KD01D GNM3145C2A150KD01D GNM3145C1H150KD01D 22pF(220) 10%(K) GNM1M25C1H220KD01D GNM2145C1H220KD01D GNM3145C2A220KD01D GNM3145C1H220KD01D 33pF(330) 10%(K) GNM1M25C1H330KD01D GNM2145C1H330KD01D GNM3145C2A330KD01D GNM3145C1H330KD01D 47pF(470) 10%(K) GNM1M25C1H470KD01D GNM2145C1H470KD01D GNM3145C2A470KD01D GNM3145C1H470KD01D 68pF(680) 10%(K) GNM1M25C1H680KD01D GNM2145C1H680KD01D GNM3145C2A680KD01D GNM3145C1H680KD01D 100pF(101) 10%(K) GNM1M25C1H101KD01D GNM2145C1H101KD01D GNM3145C2A101KD01D GNM3145C1H101KD01D 150pF(151) 10%(K) GNM1M25C1H151KD01D GNM2145C1H151KD01D GNM3145C2A151KD01D 220pF(221) 10%(K) GNM1M25C1H221KD01D GNM2145C1H221KD01D 330pF(331) 10%(K) GNM3145C1H151KD01D GNM3145C1H221KD01D GNM3145C1H331KD01D The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code High Dielectric Constant Type X7R(R7)/X7S(C7) Characteristics 1.37x1.0(1M)<0504> LxW [mm] 2(2) Number of Elements 50(1H) Rated Volt. [Vdc] Capacitance 25(1E) Tolerance 16(1C) 10(1A) Part Number 1000pF(102) 20%(M) 2200pF(222) 20%(M) GNM1M2R71E222MA01D GNM1M2R71H102MA01D 4700pF(472) 20%(M) GNM1M2R71E472MA01D 10000pF(103) 20%(M) GNM1M2R71E103MA01D 22000pF(223) 20%(M) GNM1M2R71C223MA01D GNM1M2R71A223MA01D 47000pF(473) 20%(M) GNM1M2R71C473MA01D GNM1M2R71A473MA01D 0.10F(104) 20%(M) GNM1M2R71C104MA01D GNM1M2C71A104MA01D 2.0x1.25(21)<0805> LxW [mm] 4(4) Number of Elements 50(1H) Rated Volt. [Vdc] Capacitance 25(1E) Tolerance 16(1C) Part Number 470pF(471) 20%(M) GNM214R71H471MA01D 1000pF(102) 20%(M) GNM214R71H102MA01D 2200pF(222) 20%(M) GNM214R71E222MA01D 4700pF(472) 20%(M) GNM214R71E472MA01D 10000pF(103) 20%(M) GNM214R71E103MA01D 22000pF(223) 20%(M) 47000pF(473) 20%(M) GNM214R71C473MA01D 0.10F(104) 20%(M) GNM214R71C104MA01D GNM214R71C223MA01D 3.2x1.6(31)<1206> LxW [mm] 4(4) Number of Elements 50(1H) Rated Volt. [Vdc] Capacitance 25(1E) Tolerance 16(1C) 6.3(0J) Part Number 47000pF(473) 20%(M) GNM314R71H473MA11D 0.10F(104) 20%(M) GNM314R71H104MA11D 1.0F(105) 20%(M) GNM314R71C473MA01L GNM314R71E104MA11D GNM314R71C104MA01L GNM314R70J105MA01L The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code *: Please refer to GNM series Specifications and Test Method(2). qProduct ID wSeries tTemperature Characteristics u i o !0 iCapacitance Tolerance q w e r t y Packaging Code in Part Number is a code shows STD 180mm Reel Taping. (Part Number) GN M 1M 2 5C 1H 100 K D01 D eDimension (LxW) rNumber of Elements yRated Voltage uCapacitance oIndividual Specification Code !0Packaging 65 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. High Dielectric Constant Type X5R(R6) Characteristics 2 0.9x0.6(0M)<0302> LxW [mm] 2(2) Number of Elements Rated Volt. [Vdc] Capacitance 16(1C) 10(1A) Tolerance 6.3(0J) 4(0G) Part Number 10000pF(103) 20%(M) GNM0M2R61C103ME18D* GNM0M2R61A103ME17D* GNM0M2R60J103ME17D* 22000pF(223) 20%(M) GNM0M2R61C223ME18D* GNM0M2R61A223ME17D* GNM0M2R60J223ME17D* 47000pF(473) 20%(M) GNM0M2R61C473ME18D* GNM0M2R61A473ME17D* GNM0M2R60J473ME17D* 0.10F(104) 20%(M) GNM0M2R61C104ME18D* GNM0M2R61A104ME17D* GNM0M2R60J104ME17D* 1.0F(105) 20%(M) GNM0M2R60G105ME17D* 1.37x1.0(1M)<0504> LxW [mm] 2(2) Number of Elements 50(1H) Rated Volt. [Vdc] Capacitance 25(1E) Tolerance 16(1C) Part Number 1000pF(102) 20%(M) 2200pF(222) 20%(M) GNM1M2R61E222MA01D 4700pF(472) 20%(M) GNM1M2R61E472MA01D 10000pF(103) 20%(M) GNM1M2R61E103MA01D 22000pF(223) 20%(M) 47000pF(473) 20%(M) GNM1M2R61C473MA01D 0.22F(224) 20%(M) GNM1M2R61C224ME18D* 1.0F(105) 20%(M) GNM1M2R61C105ME18D* GNM1M2R61H102MA01D GNM1M2R61C223MA01D 1.37x1.0(1M)<0504> LxW [mm] 2(2) Number of Elements 10(1A) Rated Volt. [Vdc] Capacitance Tolerance 6.3(0J) Part Number 22000pF(223) 20%(M) GNM1M2R61A223MA01D 47000pF(473) 20%(M) GNM1M2R61A473MA01D 0.10F(104) 20%(M) GNM1M2R61A104MA01D 1.0F(105) 20%(M) GNM1M2R61A105ME17D* GNM1M2R60J105ME12D* 2.2F(225) 20%(M) GNM1M2R61A225ME18D* GNM1M2R60J225ME18D* 2.0x1.25(21)<0805> LxW [mm] 2(2) Number of Elements 16(1C) Rated Volt. [Vdc] Capacitance 10(1A) Tolerance 6.3(0J) Part Number 0.47F(474) 20%(M) GNM212R61C474MA16D 1.0F(105) 20%(M) GNM212R61C105MA16D 2.2F(225) 20%(M) GNM212R61A105MA13D GNM212R61A225ME16D* GNM212R60J225ME16D* The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code *: Please refer to GNM series Specifications and Test Method(2). (Part Number) GN q M 0M w e 2 R6 1C r t y 103 M u i E18 D o Packaging Code in Part Number is a code shows STD Tray. 66 !0 qProduct ID wSeries tTemperature Characteristics iCapacitance Tolerance eDimension (LxW) rNumber of Elements yRated Voltage uCapacitance oIndividual Specification Code !0Packaging PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. High Dielectric Constant Type X5R(R6) Characteristics 2.0x1.25(21)<0805> LxW [mm] 10(1A) Rated Volt. [Vdc] Capacitance Tolerance 1.0F(105) 20%(M) 2.2F(225) 20%(M) 6.3(0J) Part Number GNM214R61A105ME17D* 3.2x1.6(31)<1206> 4(4) Number of Elements 16(1C) Rated Volt. [Vdc] 1.0F(105) GNM214R60J105ME17D* GNM214R60J225ME18D* LxW [mm] Capacitance 2 4(4) Number of Elements Tolerance 20%(M) 10(1A) Part Number GNM314R61C105MA15D GNM314R61A105MA13D The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code *: Please refer to GNM series Specifications and Test Method(2). High Dielectric Constant Type X7R(R7) Characteristics Low Profile Number of Elements Rated Volt. [Vdc] Capacitance 0.10F(104) 2.0x1.25(21)<0805> 1.37x1.0(1M)<0504> LxW [mm] 2(2) 4(4) 16(1C) 16(1C) Tolerance 20%(M) Part Number GNM1M2R71C104MAA1D GNM214R71C104MAA1D High Dielectric Constant Type X5R(R6) Characteristics Low Profile 1.37x1.0(1M)<0504> LxW [mm] 2(2) Number of Elements 16(1C) Rated Volt. [Vdc] Capacitance 1.0F(105) Tolerance 20%(M) 10(1A) Part Number GNM1M2R61C105MEA2D* GNM1M2R61A105MEA4D* The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code *: Please refer to GNM series Specifications and Test Method(2). 67 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. GNM Series Specifications and Test Methods (1) In case Non "*" is added in PNs table, please refer to GNM Series Specifications and Test Methods (1). In case "*" is added in PNs table, please refer to GNM Series Specifications and Test Methods (2). Specifications No. 1 Item Operating Temperature Range Test Method Temperature Compensating Type 5C: -55 to +125C High Dielectric Type R7, C7: -55 to +125C R6: -55 to +85C 2 Rated Voltage See the previous pages. The rated voltage is defined as the maximum voltage which may be applied continuously to the capacitor. When AC voltage is superimposed on DC voltage, VP-P or VO-P, whichever is larger, should be maintained within the rated voltage range. 3 Appearance No defects or abnormalities Visual inspection 4 Dimensions Within the specified dimensions Using calipers 5 Dielectric Strength No defects or abnormalities No failure should be observed when 300% of the rated voltage (5C) or 250% of the rated voltage (R7) is applied between the terminations for 1 to 5 seconds, provided the charge/discharge current is less than 50mA. 6 Insulation Resistance More than 10,000M or 500 * F (Whichever is smaller) The insulation resistance should be measured with a DC voltage not exceeding the rated voltage at 25C and 75%RH max. and within 2 minutes of charging. 7 Capacitance Within the specified tolerance 8 Q/ Dissipation Factor (D.F.) 30pF min.: QU1000 30pF max.: QU400+20C C: Nominal Capacitance (pF) Char. 25V min. 16V R7, R6, 0.025 0.035 max. C7 max. Char. R7 Within the Capacitance specified tolerance Change (Table A) R6 C7 9 Temperature Coefficient Within the specified tolerance (Table A) Capacitance Drift Within 0.2% or 0.05pF (Whichever is larger.) Capacitance Temperature Characteristics The capacitance/Q/D.F. should be measured at 25C at the frequency and voltage shown in the table. 10V 0.035 max. 6.3V 0.05 max. Temp. Reference Cap. Range Temp. Change -55C to +125C Within 15% -55C 25C to +85C Within -55C 22% to +125C Char. Item Frequency Voltage 5C R7 10.1MHz 0.5 to 5Vrms 10.1kHz 1.00.2Vrms The capacitance change should be measured after 5 min. at each specified temperature stage. (1) Temperature Compensating Type The temperature coefficient is determined using the capacitance measured in step 3 as a reference. When cycling the temperature sequentially from step1 through 5, the capacitance should be within the specified tolerance for the temperature coefficient and capacitance change as Table A. The capacitance drift is calculated by dividing the differences between the maximum and minimum measured values in the steps 1, 3 and 5 by the cap. value in step 3. Step 1 2 3 4 5 Temperature (C) 252 -553 (for 5C/R7/C7), -303 (for F5) 252 1253 (for 5C/R7/C7), 853 (for F5) 252 (2) High Dielectric Constant Type The ranges of capacitance change compared with the above 25C value over the temperature ranges shown in the table should be within the specified ranges. * Initial measurement for high dielectric constant type. Perform a heat treatment at 150+0/-10C for one hour and then set for 242 hours at room temperature. Perform the initial measurement. No removal of the terminations or other defect should occur. GNMpp4 10 GNMpp2 d Adhesive Strength of Termination c b a c b a d 2 Solder resist Copper foil Solder resist Copper foil Solder the capacitor to the test jig (glass epoxy board) shown in Fig.1 using a eutectic solder. Then apply 5N force in parallel with the test jig for 101 sec. The soldering should be done either with an iron or using the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock. Type GNM1M2 GNM212 GNM214 GNM314 a 0.5 0.6 0.6 0.8 b 1.6 1.8 2.0 2.5 c 0.32 0.5 0.25 0.4 d 0.32 0.5 0.25 0.4 (in mm) Fig. 1 Continued on the following page. 68 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. GNM Series Specifications and Test Methods (1) GNM Series Specifications and Test Methods (1) In case Non "*" is added in PNs table, please refer to GNM Series Specifications and Test Methods (1). In case "*" is added in PNs table, please refer to GNM Series Specifications and Test Methods (2). Continued from the preceding page. Specifications No. Item High Dielectric Type Appearance No defects or abnormalities Capacitance Within the specified tolerance 11 Vibration Resistance Q/D.F. 30pF min.: QU1000 30pF max.: QU400+20C Char. 25V min. 16V R7, R6, 0.025 0.035 max. C7 max. C: Nominal Capacitance (pF) 10V 0.035 max. 6.3V 0.05 max. Appearance No marking defects Capacitance Within 5% or 0.5pF Change (Whichever is larger) \ \_ 40 *GNMpp2 40 Solder the capacitor to the test jig (glass epoxy board) in the same manner and under the same conditions as (10). The capacitor should be subjected to a simple harmonic motion having a total amplitude of 1.5mm, the frequency being varied uniformly between the approximate limits of 10 and 55Hz. The frequency range, from 10 to 55Hz and return to 10Hz, should be traversed in approximately 1 minute. This motion should be applied for a period of 2 hours in each of 3 mutually perpendicular directions (total of 6 hours). Solder the capacitor on the test jig (glass epoxy board) shown in Fig. 2 using a eutectic solder. Then apply a force in the direction shown in Fig. 3 for 51 sec. The soldering should be done by the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock. Within 10% *GNMpp4 5.0 a b 12 Deflection 2 Test Method Temperature Compensating Type 100 5.0 a b c 1.0 c d Type GNM1M2 GNM212 GNM214 GNM314 100 20 1.0 50 Pressurizing speed : 1.0mm/sec. Pressurize R230 d t=0.8mm a 2.00.05 2.00.05 2.00.05 2.50.05 b 0.50.05 0.60.05 0.70.05 0.80.05 c d 0.320.05 0.320.05 0.50.05 0.50.05 0.30.05 0.20.05 0.40.05 0.40.05 (in mm) Flexure : V1 Capacitance meter 45 45 Fig. 3 Fig. 2 13 Immerse the capacitor in a solution of ethanol (JIS-K-8101) and rosin (JIS-K-5902) (25% rosin in weight proportion). Preheat at 80 to 120C for 10 to 30 seconds. After preheating, immerse in eutectic solder solution for 20.5 seconds at 2305C or Sn-3.0Ag-0.5Cu solder solution for 20.5 seconds at 2455C. Solderability of Termination 75% of the terminations are to be soldered evenly and continuously. Resistance to Soldering Heat The measured and observed characteristics should satisfy the specifications in the following table. Appearance No marking defects Within 2.5% Capacitance or 0.25pF Change (Whichever is larger) 14 Q/D.F. 30pF min.: QU1000 30pF max.: QU400+20C C: Nominal Capacitance (pF) Preheat the capacitor at 120 to 150C for 1 minute. Immerse the capacitor in a eutectic solder or Sn-3.0Ag-0.5Cu solder solution at 2705C for 100.5 seconds. Let sit at room temperature for 242 hours, then measure. R7, R6, C7: Within 7.5% Char. 25V min. 16V R7, R6, 0.025 0.035 max. C7 max. 10V 0.035 max. I.R. More than 10,000M or 500 * F (Whichever is smaller) Dielectric Strength No failure 6.3V 0.05 max. * Initial measurement for high dielectric constant type Perform a heat treatment at 150+0/-10C for one hour and then let sit for 242 hours at room temperature. Perform the initial measurement. Continued on the following page. 69 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. GNM Series Specifications and Test Methods (1) Continued from the preceding page. 2 In case Non "*" is added in PNs table, please refer to GNM Series Specifications and Test Methods (1). In case "*" is added in PNs table, please refer to GNM Series Specifications and Test Methods (2). Specifications No. Item Temperature Cycle Temperature Compensating Type Test Method High Dielectric Type The measured and observed characteristics should satisfy the specifications in the following table. Appearance No marking defects Within 2.5% Capacitance or 0.25pF Change (Whichever is larger) R7, R6, C7: Within 7.5% Fix the capacitor to the supporting jig in the same manner and under the same conditions as (10). Perform the five cycles according to the four heat treatments listed in the following table. Let sit for 242 hours (temperature compensating type) or 484 hours (high dielectric constant type) at room temperature, then measure. Step 15 Q/D.F. 30pF min.: QU1000 30pF max.: QU400+20C C:Nominal Capacitance (pF) Char. 25V min. 16V R7, R6, 0.025 0.035 max. C7 max. 10V 0.035 max. I.R. More than 10,000M or 500 * F (Whichever is smaller) Dielectric Strength No failure Humidity Steady State 6.3V 0.05 max. 1 Min. Temp. (C) Operating Temp.+0/-3 Time (min.) 303 2 Room Temp. 2 to 3 3 Max. Operating Temp. +3/-0 303 4 Room Temp. 2 to 3 * Initial measurement for high dielectric constant type Perform a heat treatment at 150+0/-10C for one hour and then let sit for 242 hours at room temperature. Perform the initial measurement. The measured and observed characteristics should satisfy the specifications in the following table. Appearance No marking defects Within 5% Capacitance or 0.5pF Change (Whichever is larger) R7, R6, C7: Within 12.5% Sit the capacitor at 402C and 90 to 95% humidity for 50012 hours. Remove and let sit for 242 hours at room temperature, then measure. Q/D.F. 30pF and over: QU350 10pF and over, 30pF and below: QU275+5C/2 10pF and below: QU200+10C C: Nominal Capacitance (pF) I.R. More than 1,000M or 50 * F (Whichever is smaller) 16 Humidity Load Char. 25V min. R7, R6, 0.05 C7 max. 16V 0.05 max. 10V/6.3V 0.05 max. The measured and observed characteristics should satisfy the specifications in the following table. Appearance No marking defects Within 7.5% Capacitance or 0.75pF Change (Whichever is larger) 17 Q/D.F. 30pF and over: QU200 30pF and below: QU100+10C/3 R7, R6, C7: Within 12.5% Char. 25V min. R7, R6, 0.05 C7 max. 16V 0.05 max. 10V/6.3V 0.05 max. Apply the rated voltage at 402C and 90 to 95% humidity for 50012 hours. Remove and let sit for 242 hours at room temperature, then measure. The charge/discharge current is less than 50mA. C: Nominal Capacitance (pF) I.R. More than 500M or 25 * F (Whichever is smaller) Continued on the following page. 70 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. GNM Series Specifications and Test Methods (1) GNM Series Specifications and Test Methods (1) Continued from the preceding page. In case Non "*" is added in PNs table, please refer to GNM Series Specifications and Test Methods (1). In case "*" is added in PNs table, please refer to GNM Series Specifications and Test Methods (2). Specifications No. Item High Temperature Load Temperature Compensating Type 2 Test Method High Dielectric Type The measured and observed characteristics should satisfy the specifications in the following table. Appearance No marking defects Within 3% Capacitance or 0.3pF Change (Whichever is larger) Apply 200% of the rated voltage for 100012 hours at the maximum operating temperature 3C. Let sit for 242 hours at room temperature, then measure. The charge/discharge current is less than 50mA. R7, R6, C7: Within 12.5% Q/D.F. 30pF and over: QU350 10pF and over, 30pF and below: QU275+5C/2 10pF and below: QU200+10C C: Nominal Capacitance (pF) I.R. More than 1,000M or 50 * F (Whichever is smaller) 18 Char. 25V min. R7, R6, 0.04 C7 max. 16V 0.05 max. 10V/6.3V 0.05 max. * Initial measurement for high dielectric constant type. Apply 200% of the rated DC voltage for one hour at the maximum operating temperature 3C. Remove and let sit for 242 hours at room temperature. Perform initial measurement. Table A Char. 5C Nominal Values (ppm/C) Note 1 030 -55C Max. 0.58 Min. -0.24 Capacitance Change from 25C (%) -30C Max. Min. 0.40 -0.17 -10C Max. 0.25 Min. -0.11 Note 1: Nominal values denote the temperature coefficient within a range of 25 to 125C. 71 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. GNM Series Specifications and Test Methods (2) In case Non "*" is added in PNs table, please refer to GNM Series Specifications and Test Methods (1). In case "*" is added in PNs table, please refer to GNM Series Specifications and Test Methods (2). No. Item 1 Operating Temperature Range Specifications Test Method R6: -55C to +85C 2 Rated Voltage See the previous pages. The rated voltage is defined as the maximum voltage which may be applied continuously to the capacitor. When AC voltage is superimposed on DC voltage, VP-P or VO-P, whichever is larger, should be maintained within the rated voltage range. 3 Appearance No defects or abnormalities Visual inspection 4 Dimensions Within the specified dimension Using calipers 5 Dielectric Strength No defects or abnormalities No failure should be observed when 250% of the rated voltage is applied between the terminations for 1 to 5 seconds, provided the charge/discharge current is less than 50mA. 6 Insulation Resistance 50 * F min. The insulation resistance should be measured with a DC voltage not exceeding the rated voltage at 25C and 75%RH max. and within 1 minute of charging. 7 Capacitance Within the specified tolerance The capacitance/D.F. should be measured at 25C at the frequency and voltage shown in the table. Nominal Capacitance Measuring Frequency Measuring Voltage CV10F *1 (10V min.) 10.1kHz 1.00.2Vrms CV10F *2 (6.3V max.) 10.1kHz 0.50.1Vrms *1For items in Table1 10.1kHz 0.50.1Vrms *2For items in Table2 10.1kHz 1.00.1Vrms 0.1 max.*3 8 Dissipation Factor (D.F.) Table 3 GNM0M2 GNM1M2 GNM1M2 GNM212 GNM212 GNM214 R6 R6 R6 R6 R6 R6 103/223/473/104 0J 105/225 1A 225 0J 225 1A 225 0J 225 Table 1 GNM0M2 GNM0M2 GNM1M2 GNM1M2 R6 R6 R6 R6 1A 1C 1A 1C 104 104 105/225 224/105 Table 2 GNM0M2 R6 0J 103/223/473 GNM212 R6 0J 225 GNM214 R6 0J 105 *3 However 0.125 max. about Table 3 items. The capacitance change should be measured after 5 min.at each specified temperature stage. 9 Capacitance Temperature Characteristics Char. Temp. Range R6 -55 to +85C Reference Temp. 25C Cap. Change Within 15% No removal of the terminations or other defects should occur. GNMpp4 a c c Adhesive Strength of Termination b a d 10 GNMpp2 b d 2 Solder resist Copper foil Solder resist Copper foil Fig. 1 Appearance No defects or abnormalities Capacitance Within the specified tolerance 11 Vibration D.F. 0.1 max.*3 *3 However 0.125 max. about Table 3 items. Step 1 2 3 4 5 Temperature (C) 252 -553 252 853 252 The ranges of capacitance change compared with the 25C value over the temperature ranges shown in the table should be within the specified ranges. * Initial measurement for high dielectric constant type. Perform a heat treatment at 150+0/-10C for one hour and then set for 242 hours at room temperature. Perform the initial measurement. Solder the capacitor to the test jig (glass epoxy board) shown in Fig. 1 using a eutectic solder. Then apply 5N (GNM0M2: 2N) force in parallel with the test jig for 101 sec. The soldering should be done either with an iron or using the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock. Type GNM0M2 GNM1M2 GNM212 GNM214 GNM314 a 0.2 0.5 0.6 0.6 0.8 b 0.96 1.6 1.8 2.0 2.5 c 0.25 0.32 0.5 0.25 0.4 d 0.2 0.32 0.5 0.25 0.4 (in mm) Solder the capacitor to the test jig (glass epoxy board) in the same manner and under the same conditions as (10). The capacitor should be subjected to a simple harmonic motion having a total amplitude of 1.5mm, the frequency being varied uniformly between the approximate limits of 10 and 55Hz. The frequency range, from 10 to 55Hz and return to 10Hz, should be traversed in approximately 1 minute. This motion should be applied for a period of 2 hours in each of 3 mutually perpendicular directions (total of 6 hours). Continued on the following page. 72 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. GNM Series Specifications and Test Methods (2) GNM Series Specifications and Test Methods (2) In case Non "*" is added in PNs table, please refer to GNM Series Specifications and Test Methods (1). In case "*" is added in PNs table, please refer to GNM Series Specifications and Test Methods (2). Continued from the preceding page. No. Item Specifications Test Method Appearance No marking defects Capacitance Within 10% Change 40 #GNMpp2 40 #GNMpp4 20 5.0 a b 12 Deflection 2 Solder the capacitor to the test jig (glass epoxy board) shown in Fig. 2 using a eutectic solder. Then apply a force in the direction shown in Fig. 3. The soldering should be done by the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock. 100 5.0 a b c 1.0 c d Type GNM0M2 GNM1M2 GNM212 GNM214 GNM314 b 0.20.05 0.50.05 0.60.05 0.70.05 0.80.05 50 Pressurizing speed : 1.0mm/sec. Pressurize R230 1.0 Thickness: 0.8mm d a 2.00.05 2.00.05 2.00.05 2.00.05 2.50.05 100 c 0.20.05 0.320.05 0.50.05 0.30.05 0.40.05 d 0.250.05 0.320.05 0.50.05 0.20.05 0.40.05 (in mm) Flexure : V1 Capacitance meter 45 45 Fig. 3 Fig. 2 13 Solderability of Termination 75% of the terminations are to be soldered evenly and continuously. Immerse the capacitor in a solution of ethanol (JIS-K-8101) and rosin (JIS-K-5902) (25% rosin in weight proportion). Preheat at 80 to 120C for 10 to 30 seconds. After preheating, immerse in eutectic solder solution for 20.5 seconds at 2305C or Sn-3.0Ag-0.5Cu solder solution for 20.5 seconds at 2455C. Appearance No marking defects Capacitance R6*4: Within 7.5% Change *4 GNM0M2R60E105: Within +15/-7.5% Resistance 14 to Soldering D.F. Heat I.R. 0.1 max. *3 *3 However 0.125 max. about Table 3 items. 50 * F min. Dielectric No failure Strength Appearance No marking defects Capacitance R6*5: Within 12.5% Change *5 GNM0M2R60E105: Within 15% 15 Temperature Cycle High Temperature 16 High Humidity (Steady) D.F. 0.1 max. *3 *3 However 0.125 max. about Table 3 items. I.R. 50 * F min. Preheat the capacitor at 120 to 150C for 1 minute. Immerse the capacitor in a eutectic solder or Sn-3.0Ag-0.5Cu solder solution at 2705C for 100.5 seconds. Let sit at room temperature for 242 hours, then measure. * Initial measurement Perform a heat treatment at 150 +0/-10C for one hour and then let sit for 242 hours at room temperature. Perform the initial measurement. Fix the capacitor to the supporting jig in the same manner and under the same conditions as (10). Perform the five cycles according to the four heat treatments listed in the following table. Let sit for 242 hours at room temperature, then measure. 4 Step 1 2 3 Temp. (C) Min. Operating Room Min. Operating Room Temp. Temp. Temp. Temp. Time (min.) 303 303 2 to 3 2 to 3 Dielectric No failure Strength * Initial measurement Perform a heat treatment at 150 +0/-10 C for one hour and then let sit for 242 hours at room temperature. Perform the initial measurement. Appearance No marking defects Apply the rated voltage at 402C and 90 to 95% humidity for 50012 hours. The charge/discharge current is less than 50mA. * Initial measurement Perform a heat treatment at 150 +0/-10C for one hour and then let sit for 242 hours at room temperature. Perform the initial measurement. * Measurement after test Perform a heat treatment at 150 +0/-10C for one hour and then let sit for 242 hours at room temperature, then measure. Capacitance R6: Within 12.5% Change D.F. 0.2 max. I.R. 12.5 * F min. Appearance No marking defects Capacitance R6: Within 12.5% Change D.F. 0.2 max. I.R. 25 * F min. 17 Durability Apply 150% (GNM1M2R61A225/1C105: 125% of the rated voltage) of the rated voltage for 100012 hours at the maximum operating temperature 3C. Let sit for 242 hours at room temperature, then measure. The charge/discharge current is less than 50mA. * Initial measurement Perform a heat treatment at 150 +0/-10C for one hour and then let sit for 242 hours at room temperature. Perform the initial measurement. * Measurement after test Perform a heat treatment at 150 +0/-10C for one hour and then let sit for 242 hours at room temperature, then measure. 73 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Chip Monolithic Ceramic Capacitors Low ESL LLL/LLA/LLM Series Reversed Geometry Low ESL Type L W T Features 1. Low ESL, good for noise reduction for high frequency 2. Small, high cap Applications 1. High speed micro processor 2. High frequency digital equipment Part Number LLL153 LLL185 LLL215 LLL216 LLL219 LLL315 LLL317 LLL31M L 0.5 0.05 0.8 0.1 Dimensions (mm) W 1.0 0.05 1.6 0.1 1.25 0.1 2.0 0.1 1.6 0.15 3.2 0.15 T 0.3 0.05 0.6 max. 0.5 +0/-0.15 0.6 0.1 0.85 0.1 0.5 +0/-0.15 0.7 0.1 1.15 0.1 Eight Terminals Low ESL Type W T L Features 1. Low ESL (100pH) , suitable to decoupling capacitor for 1GHz clock speed IC. 2. Small, large cap q 1. High speed micro processor 2. High frequency digital equipment e Equivalent Circuit r q e t u w r y i P i Applications w Part Number LLA185 LLA215 LLA219 LLA315 LLA319 LLA31M L 1.6 0.1 2.0 0.1 2.0 0.1 3.2 0.15 3.2 0.15 3.2 0.15 u y t Dimensions (mm) W T 0.8 0.1 0.5 +0.05/-0.1 1.25 0.1 0.5 +0.05/-0.1 1.25 0.1 0.85 0.1 1.6 0.15 0.5 +0.05/-0.1 1.6 0.15 0.85 0.1 1.6 0.15 1.15 0.1 P 0.4 0.1 0.5 0.05 0.5 0.05 0.8 0.1 0.8 0.1 0.8 0.1 Ten Terminals Low ESL Type W L Features T 3 1. Low ESL (45pH), suitable to decoupling capacitor for 2GHz clock speed IC. 2. Small, large cap q 74 e Equivalent Circuit r q e t u o P !0 o Applications 1. High speed micro processor 2. High frequency digital equipment w Part Number i u t y w r y i !0 Dimensions (mm) L W T P LLM215 2.0 0.1 1.25 0.1 0.5 +0.05/-0.1 0.5 0.05 LLM315 3.2 0.15 1.6 0.15 0.5 +0.05/-0.1 0.8 0.1 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Capacitance Table Reversed Geometry Low ESL Type X7R(R7)/X7S(C7)/X6S(C8)/X5R(R6) Characteristics 5 ex.5: T Dimension [mm] LxW [mm] 0.5x1.0 (15) <0204> 0.8x1.6 (18) <0306> 1.25x2.0 (21) <0508> 1.6x3.2 (31) <0612> Rated Voltage 6.3 [Vdc] (0J) 4 (0G) 50 (1H) 25 (1E) 16 (1C) 10 (1A) 4 (0G) 50 (1H) 25 (1E) 16 (1C) 10 (1A) 4 (0G) 50 (1H) 25 (1E) 16 (1C) 10 (1A) X6S (C8) X7S (C7) X7R (R7) X7R (R7) X7R (R7) X7R (R7) X7S (C7) X7R (R7) X7R (R7) X7R (R7) X7R (R7) X7S (C7) X7R (R7) X7R (R7) X7R (R7) X7R (R7) Capacitance TC 2200pF(222) 5 4700pF(472) 5 10000pF(103) 5 6 7 22000pF(223) 5 6 7 47000pF(473) 5 0.10F(104) 3 5 0.22F(224) 3 5 6 7 6 M M 5 9 M 1.0F(105) 5 9 2.2F(225) 5 0.47F(474) 3 X7R (R7) X5R (R6) 7 6 9 3 6.3 (0J) 7 7 M 7 M 9 4.7F(475) 7 M 10F(106) M The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code Reversed Geometry Low ESL Type X7R(R7)/X7S(C7) Characteristics Low Profile 5 ex.5: T Dimension [mm] 0.8x1.6 (18) <0306> LxW [mm] 1.25x2.0 (21) <0508> 1.6x3.2 (31) <0612> Rated Voltage 25 [Vdc] (1E) 16 (1C) 10 (1A) 4 (0G) 50 (1H) 25 (1E) 16 (1C) 10 (1A) 6.3 (0J) 4 (0G) 50 (1H) 25 (1E) 16 (1C) 10 (1A) X7R (R7) X7R (R7) X7R (R7) X7S (C7) X7R (R7) X7R (R7) X7R (R7) X7R (R7) X7R (R7) X7S (C7) X7R (R7) X7R (R7) X7R (R7) X7R (R7) Capacitance TC 10000pF(103) 5 47000pF(473) 5 0.10F(104) 0.22F(224) 5 5 5 22000pF(223) 5 5 5 5 5 5 5 5 5 1.0F(105) The part number code is shown in ( ) and Unit is shown in [ ]. 5 5 5 0.47F(474) 5 < >: EIA [inch] Code Continued on the following page. 75 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Capacitance Table Continued from the preceding page. Eight Terminals Low ESL Type X7S(C7)/X7R(R7) Characteristics 5 ex.5: T Dimension [mm] LxW 1.6x0.8 (18) [mm] <0603> 3 2.0x1.25 (21) <0805> 3.2x1.6 (31) <1206> Rated Voltage 4 [Vdc] (0G) 25 (1E) 16 (1C) 10 (1A) 6.3 (0J) 4 (0G) 16 (1C) 10 (1A) 4 (0G) X7S (C7) X7R (R7) X7R (R7) X7R (R7) X7R (R7) X7S (C7) X7R (R7) X7R (R7) X7R (R7) Capacitance TC 10000pF(103) 9 22000pF(223) 9 47000pF(473) 9 0.10F(104) 5 9 0.22F(224) 5 9 0.47F(474) 5 1.0F(105) 5 2.2F(225) 5 9 9 9 9 M 9 4.7F(475) 9 M 9 9 9 The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code Eight Terminals Low ESL Type X7R(R7)/X7S(C7) Characteristics Low Profile 5 ex.5: T Dimension [mm] 2.0x1.25 (21) <0805> LxW [mm] 3.2x1.6 (31) <1206> Rated Voltage 25 [Vdc] (1E) 16 (1C) 10 (1A) 6.3 (0J) 4 (0G) 16 (1C) 10 (1A) 6.3 (0J) X7R (R7) X7R (R7) X7R (R7) X7R (R7) X7S (C7) X7R (R7) X7R (R7) X7R (R7) Capacitance TC 10000pF(103) 5 22000pF(223) 5 47000pF(473) 5 0.10F(104) 5 0.22F(224) 5 5 0.47F(474) 5 5 1.0F(105) 5 5 2.2F(225) 5 5 4.7F(475) 5 The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code Ten Terminals Low ESL Type X7R(R7)/X7S(C7) Characteristics Low Profile 5 ex.5: T Dimension [mm] 2.0x1.25 (21) <0805> LxW [mm] 3.2x1.6 (31) <1206> Rated Voltage 25 [Vdc] (1E) 16 (1C) 6.3 (0J) 4 (0G) 16 (1C) 10 (1A) 6.3 (0J) X7R (R7) X7R (R7) X7R (R7) X7S (C7) X7R (R7) X7R (R7) X7R (R7) Capacitance TC 10000pF(103) 5 22000pF(223) 5 47000pF(473) 5 0.10F(104) 5 5 0.22F(224) 5 0.47F(474) 5 5 5 1.0F(105) 5 2.2F(225) 5 The part number code is shown in ( ) and Unit is shown in [ ]. 76 5 < >: EIA [inch] Code PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Reversed Geometry Low ESL Type X7R(R7)/X7S(C7)/X6S(C8) Characteristics 0.5x1.0(15)<0204> LxW [mm] 6.3(0J) Rated Volt. [Vdc] Capacitance Tolerance 4(0G) Part Number 0.10F(104) 20%(M) LLL153C80J104ME01E* 0.22F(224) 20%(M) LLL153C80J224ME14E* 0.47F(474) 20%(M) 3 LLL153C70G474ME17E* LLL153 Series 4V/0.47F(L: 0.5+0.07/-0.03mm) 0.8x1.6(18)<0306> LxW [mm] 50(1H) Rated Volt. [Vdc] Capacitance 25(1E) Tolerance 16(1C) 10(1A) Part Number 2200pF(222) 20%(M) LLL185R71H222MA01L 4700pF(472) 20%(M) LLL185R71H472MA01L 10000pF(103) 20%(M) LLL185R71E103MA01L 22000pF(223) 20%(M) LLL185R71E223MA01L 47000pF(473) 20%(M) 0.10F(104) 20%(M) LLL185R71A104MA01L 0.22F(224) 20%(M) LLL185R71A224MA01L LLL185R71C473MA01L 0.8x1.6(18)<0306> LxW [mm] 4(0G) Rated Volt. [Vdc] Capacitance Tolerance Part Number 0.47F(474) 20%(M) LLL185C70G474MA01L 1.0F(105) 20%(M) LLL185C70G105ME02L* 2.2F(225) 20%(M) LLL185C70G225ME01L* 1.25x2.0(21)<0508> LxW [mm] 50(1H) Rated Volt. [Vdc] Capacitance 25(1E) Tolerance 16(1C) 10(1A) LLL219R71C224MA01L LLL216R71A224MA01L Part Number 10000pF(103) 20%(M) LLL216R71H103MA01L 22000pF(223) 20%(M) LLL216R71H223MA01L 47000pF(473) 20%(M) LLL216R71E473MA01L 0.10F(104) 20%(M) LLL216R71E104MA01L 0.22F(224) 20%(M) 0.47F(474) 20%(M) LLL219R71A474MA01L 1.0F(105) 20%(M) LLL219R71A105MA01L 1.25x2.0(21)<0508> LxW [mm] 4(0G) Rated Volt. [Vdc] Capacitance 2.2F(225) Tolerance Part Number 20%(M) LLL219C70G225MA01L The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code *: Please refer to LLL/LLA/LLM Series Specifications and Test Method(2). qProduct ID wSeries tTemperature Characteristics u i o !0 iCapacitance Tolerance q w e r t y Packaging Code in Part Number is a code shows STD 180mm Reel Taping. (Part Number) LL L 15 3 C8 0J 104 M E01 E eDimension (LxW) yRated Voltage oIndividual Specification Code rDimension (T) uCapacitance !0Packaging 77 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Reversed Geometry Low ESL Type X7R(R7)/X5R(R6) Characteristics 1.6x3.2(31)<0612> LxW [mm] 50(1H) Rated Volt. [Vdc] Capacitance 3 25(1E) Tolerance 16(1C) 10000pF(103) 20%(M) LLL317R71H103MA01L 22000pF(223) 20%(M) LLL317R71H223MA01L 47000pF(473) 20%(M) LLL317R71H473MA01L 0.10F(104) 20%(M) LLL31MR71H104MA01L 0.22F(224) 20%(M) LLL31MR71E224MA01L 0.47F(474) 20%(M) LLL31MR71E474MA01L 1.0F(105) 20%(M) 2.2F(225) 20%(M) LLL317R71E104MA01L LLL317R71C224MA01L LLL317R71C474MA01L LLL31MR71C105MA01L LLL317R71A105MA01L LLL31MR71A225MA01L 1.6x3.2(31)<0612> LxW [mm] 6.3(0J) Rated Volt. [Vdc] Capacitance 10(1A) Part Number Tolerance Part Number 2.2F(225) 20%(M) LLL317R70J225MA01L 4.7F(475) 20%(M) LLL31MR70J475MA01L 10F(106) 20%(M) LLL31MR60J106ME01L* The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code *: Please refer to LLL/LLA/LLM Series Specifications and Test Method(2). Reversed Geometry Low ESL Type X7R(R7)/X7S(C7) Characteristics Low Profile 0.8x1.6(18)<0306> LxW [mm] 25(1E) Rated Volt. [Vdc] Capacitance 16(1C) Tolerance 10(1A) 10000pF(103) 20%(M) 22000pF(223) 20%(M) LLL185R71C223MA11L 47000pF(473) 20%(M) LLL185R71C473MA11L 0.10F(104) 20%(M) 0.22F(224) 20%(M) LLL185R71E103MA11L LLL185R71A104MA11L LLL185C70G224MA11L 1.25x2.0(21)<0508> LxW [mm] 50(1H) Rated Volt. [Vdc] Capacitance 25(1E) Tolerance 16(1C) 10(1A) Part Number 10000pF(103) 20%(M) 22000pF(223) 20%(M) 47000pF(473) 20%(M) LLL215R71C473MA11L 0.10F(104) 20%(M) LLL215R71C104MA11L 0.22F(224) 20%(M) LLL215R71H103MA11L LLL215R71E223MA11L LLL215R71A224MA11L 1.25x2.0(21)<0508> LxW [mm] 6.3(0J) Rated Volt. [Vdc] Capacitance 4(0G) Part Number Tolerance 0.47F(474) 20%(M) 1.0F(105) 20%(M) 4(0G) Part Number LLL215R70J474MA11L LLL215C70G105MA11L The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code *: Please refer to LLL/LLA/LLM Series Specifications and Test Method(2). qProduct ID wSeries tTemperature Characteristics u i o !0 iCapacitance Tolerance q w e r t y Packaging Code in Part Number is a code shows STD 180mm Reel Taping. (Part Number) LL 78 L 31 7 R7 1H 103 M A01 L eDimension (LxW) yRated Voltage oIndividual Specification Code rDimension (T) uCapacitance !0Packaging PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Reversed Geometry Low ESL Type X7R(R7) Characteristics Low Profile 1.6x3.2(31)<0612> LxW [mm] 50(1H) Rated Volt. [Vdc] Capacitance 25(1E) 16(1C) Tolerance 10(1A) Part Number 10000pF(103) 20%(M) LLL315R71H103MA11L 22000pF(223) 20%(M) LLL315R71H223MA11L 47000pF(473) 20%(M) LLL315R71E473MA11L 0.10F(104) 20%(M) LLL315R71E104MA11L 0.22F(224) 20%(M) 0.47F(474) 20%(M) 3 LLL315R71C224MA11L LLL315R71A474MA11L The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code *: Please refer to LLL/LLA/LLM Series Specifications and Test Method(2). Eight Terminals Low ESL Type X7R(R7)/X7S(C7) Characteristics 1.6x0.8(18)<0603> LxW [mm] 4(0G) Rated Volt. [Vdc] Capacitance Tolerance Part Number 0.10F(104) 20%(M) LLA185C70G104MA01L 0.22F(224) 20%(M) LLA185C70G224MA01L 0.47F(474) 20%(M) LLA185C70G474MA01L 1.0F(105) 20%(M) LLA185C70G105ME01L* 2.2F(225) 20%(M) LLA185C70G225ME16L* 2.0x1.25(21)<0805> LxW [mm] 25(1E) Rated Volt. [Vdc] Capacitance 16(1C) Tolerance 10(1A) 10000pF(103) 20%(M) LLA219R71E103MA01L 22000pF(223) 20%(M) LLA219R71E223MA01L 47000pF(473) 20%(M) LLA219R71E473MA01L 0.10F(104) 20%(M) LLA219R71C104MA01L 0.22F(224) 20%(M) LLA219R71C224MA01L 0.47F(474) 20%(M) 1.0F(105) 20%(M) LLA219R71A474MA01L LLA219R70J105MA01L 2.0x1.25(21)<0805> LxW [mm] 4(0G) Rated Volt. [Vdc] Capacitance Tolerance Part Number 2.2F(225) 20%(M) LLA219C70G225MA01L 4.7F(475) 20%(M) LLA219C70G475ME01L* 3.2x1.6(31)<1206> LxW [mm] 16(1C) Rated Volt. [Vdc] Capacitance 6.3(0J) Part Number Tolerance 10(1A) 4(0G) Part Number 0.10F(104) 20%(M) LLA319R71C104MA01L 0.22F(224) 20%(M) LLA319R71C224MA01L 0.47F(474) 20%(M) LLA319R71C474MA01L 1.0F(105) 20%(M) LLA31MR71C105MA01L 2.2F(225) 20%(M) LLA319R71A105MA01L LLA31MR71A225MA01L LLA319R70G225MA01L The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code *: Please refer to LLL/LLA/LLM Series Specifications and Test Method(2). 79 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Eight Terminals Low ESL Type X7R(R7)/X7S(C7) Characteristics Low Profile 2.0x1.25(21)<0805> LxW [mm] 25(1E) Rated Volt. [Vdc] Capacitance 3 16(1C) 10(1A) Tolerance 10000pF(103) 20%(M) LLA215R71E103MA14L 22000pF(223) 20%(M) LLA215R71E223MA14L 47000pF(473) 20%(M) LLA215R71C473MA14L 0.10F(104) 20%(M) LLA215R71C104MA14L 0.22F(224) 20%(M) 0.47F(474) 20%(M) LLA215R71A224MA14L LLA215R70J474MA14L 2.0x1.25(21)<0805> LxW [mm] 4(0G) Rated Volt. [Vdc] Capacitance Tolerance Part Number 1.0F(105) 20%(M) LLA215C70G105MA14L 2.2F(225) 20%(M) LLA215C70G225ME11L* 4.7F(475) 20%(M) LLA215C70G475ME19L* 3.2x1.6(31)<1206> LxW [mm] 16(1C) Rated Volt. [Vdc] Capacitance 6.3(0J) Part Number 10(1A) Tolerance 6.3(0J) Part Number 0.22F(224) 20%(M) 0.47F(474) 20%(M) 1.0F(105) 20%(M) LLA315R70J105MA14L 2.2F(225) 20%(M) LLA315R70J225MA14L LLA315R71C224MA14L LLA315R71A474MA14L The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code *: Please refer to LLL/LLA/LLM Series Specifications and Test Method(2). Ten Terminals Low ESL Type X7R(R7)/X7S(C7) Characteristics Low Profile 2.0x1.25(21)<0805> LxW [mm] 25(1E) Rated Volt. [Vdc] Capacitance 16(1C) Tolerance 6.3(0J) 4(0G) Part Number 10000pF(103) 20%(M) LLM215R71E103MA11L 22000pF(223) 20%(M) LLM215R71E223MA11L 47000pF(473) 20%(M) LLM215R71C473MA11L 0.10F(104) 20%(M) LLM215R71C104MA11L 0.22F(224) 20%(M) LLM215R70J224MA11L 0.47F(474) 20%(M) LLM215R70J474MA11L 1.0F(105) 20%(M) LLM215C70G105MA11L 2.2F(225) 20%(M) LLM215C70G225ME11L* 3.2x1.6(31)<1206> LxW [mm] 16(1C) Rated Volt. [Vdc] Capacitance 10(1A) Tolerance 6.3(0J) Part Number 0.10F(104) 20%(M) LLM315R71C104MA11L 0.22F(224) 20%(M) LLM315R71C224MA11L 0.47F(474) 20%(M) 2.2F(225) 20%(M) LLM315R71A474MA11L LLM315R70J225MA11L The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code *: Please refer to LLL/LLA/LLM Series Specifications and Test Method(2). qProduct ID wSeries tTemperature Characteristics u i o !0 iCapacitance Tolerance q w e r t y Packaging Code in Part Number is a code shows STD 180mm Reel Taping. (Part Number) LL 80 A 21 5 R7 1E 103 M A14 L eDimension (LxW) yRated Voltage oIndividual Specification Code rDimension (T) uCapacitance !0Packaging PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. LLL/LLA/LLM Series Specifications and Test Methods (1) and Test Methods (1) LLL/LLA/LLM Series Specifications In case Non "*" is added in PNs table, please refer to LLL/LLA/LLM Series Specifications and Test Methods (1). In case "*" is added in PNs table, please refer to LLL/LLA/LLM Series Specifications and Test Methods (2). No. 1 Specifications Item Operating Temperature Range Test Method R7, C7: Y55 to W125C 3 2 Rated Voltage See the previous pages. The rated voltage is defined as the maximum voltage which may be applied continuously to the capacitor. When AC voltage is superimposed on DC voltage, VP-P or VO-P, whichever is larger, should be maintained within the rated voltage range. 3 Appearance No defects or abnormalities Visual inspection 4 Dimensions Within the specified dimension Using calipers 5 Dielectric Strength No defects or abnormalities No failure should be observed when 250% of the rated voltage is applied between the terminations for 1 to 5 seconds, provided the charge/discharge current is less than 50mA. 6 Insulation Resistance CV0.047F: More than 10,000M CG0.047F: More than 500 * F C: Normal Capacitance The insulation resistance should be measured with a DC voltage not exceeding the rated voltage at 25C and 75%RH max. and within 2 minutes of charging. 7 Capacitance Within the specified tolerance 8 Dissipation Factor (D.F.) W.V.: 25V min.; 0.025 max. W.V.: 16V/10V max.; 0.035 max. W.V.: 6.3V max.; 0.05 max. The capacitance/D.F. should be measured at 25C at the frequency and voltage shown in the table. Frequency: 1T0.1kHz Voltage: 1T0.2Vrms *For LLA185C70G474, the capacitance should be measured unsing a voltage of 0.50.1Vrms. The capacitance change should be measured after 5 min. at each specified temperature stage. 9 10 11 12 Capacitance Temperature Characteristics Adhesive Strength of Termination R7 C7 Temp. Range (C) Y55 to +125 Y55 to +125 Reference Temp. 25C 25C No defects or abnormalities Capacitance Within the specified tolerance D.F. W.V.: 25V min.; 0.025 max. W.V.: 16V/10V max.; 0.035 max. W.V.: 6.3V max.; 0.05 max. Solderability of Termination Cap.Change Within T15% Within T22% No removal of the terminations or other defect should occur. Appearance Vibration Resistance Resistance 13 to Soldering Heat Char. 75% of the terminations are to be soldered evenly and continuously. Appearance No marking defects Capacitance Change Within T7.5% D.F. W.V.: 25V min.; 0.025 max. W.V.: 16V/10V max.; 0.035 max. W.V.: 6.3V max.; 0.05 max. I.R. More than 10,000M or 500 * F (Whichever is smaller) Dielectric Strength No failure Step 1 2 3 4 5 Temperature (C) 25T2 Y55T3 25T2 125T3 25T2 The ranges of capacitance change compared with the 25C value over the temperature ranges shown in the table should be within the specified ranges. * Initial measurement. Perform a heat treatment at 150+0/-10C for one hour and then set for 242 hours at room temperature. Perform the initial measurement. Solder the capacitor to the test jig (glass epoxy board) using a eutectic solder. Then apply 10N* force in parallel with the test jig for 10T1 sec. The soldering should be done either with an iron or using the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock. *LLL18 and LLA/LLM Series: 5N Solder the capacitor to the test jig (glass epoxy board) in the same manner and under the same conditions as (10). The capacitor should be subjected to a simple harmonic motion having a total amplitude of 1.5mm, the frequency being varied uniformly between the approximate limits of 10 and 55Hz. The frequency range, from 10 to 55Hz and return to 10Hz, should be traversed in approximately 1 minute. This motion should be applied for a period of 2 hours in each of 3 mutually perpendicular directions (total of 6 hours). Immerse the capacitor in a solution of ethanol (JIS-K-8101) and rosin (JIS-K-5902) (25% rosin in weight proportion). Preheat at 80 to 120C for 10 to 30 seconds. After preheating, immerse in eutectic solder solution for 2T0.5 seconds at 230T5C, or Sn-3.0Ag-0.5Cu solder solution for 2T0.5 seconds at 245T5C. Preheat the capacitor at 120 to 150C for 1 minute. Immerse the capacitor in a eutectic solder or Sn-3.0Ag-0.5Cu solder solution at 270T5C for 10T0.5 seconds. Let sit at room temperature for 24T2 hours, then measure. * Initial measurement. Perform a heat treatment at 150 +0 -10 C for one hour and then let sit for 24T2 hours at room temperature. Perform the initial measurement. Continued on the following page. 81 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. LLL/LLA/LLM Series Specifications and Test Methods (1) Continued from the preceding page. No. Specifications Item 3 14 In case Non "*" is added in PNs table, please refer to LLL/LLA/LLM Series Specifications and Test Methods (1). In case "*" is added in PNs table, please refer to LLL/LLA/LLM Series Specifications and Test Methods (2). Temperature Cycle Appearance No marking defects Capacitance Change Within T7.5% D.F. W.V.: 25V min.; 0.025 max. W.V.: 16V/10V max.; 0.035 max. W.V.: 6.3V max.; 0.05 max. I.R. More than 10,000M or 500 * F (Whichever is smaller) Test Method Fix the capacitor to the supporting jig in the same manner and under the same conditions as (10). Perform the five cycles according to the four heat treatments listed in the following table. Let sit for 24T2 hours at room temperature, then measure. Step 1 2 3 4 Min. Operating Room Max. Operating Room +3 Temp. (C) Temp. +0 -3 Temp. -0 Temp. Temp. Time (min.) 15 16 17 82 Humidity (Steady State) Humidity Load High Temperature Load Dielectric Strength No failure Appearance No marking defects Capacitance Change Within T12.5% D.F. W.V.: 10V min.; 0.05 max. W.V.: 6.3V max.; 0.075 max. I.R. More than 1,000M or 50 * F (Whichever is smaller) Appearance No marking defects Capacitance Change Within T12.5% D.F. W.V.: 10V min.; 0.05 max. W.V.: 6.3V max.; 0.075 max. I.R. More than 500M or 25 * F (Whichever is smaller) Appearance No marking defects Capacitance Change Within T12.5% D.F. W.V.: 10V min.; 0.05 max. W.V.: 6.3V max.; 0.075 max. I.R. More than 1,000M or 50 * F (Whichever is smaller) 30T3 2 to 3 30T3 2 to 3 * Initial measurement. Perform a heat treatment at 150 +0 -10 C for one hour and then let sit for 24T2 hours at room temperature. Perform the initial measurement. Sit the capacitor at 40T2C and 90 to 95% humidity for 500T12 hours. Remove and let sit for 24T2 hours at room temperature, then measure. Apply the rated voltage at 40T2C and 90 to 95% humidity for 500T12 hours. Remove and let sit for 24T2 hours at room temperature, then measure. The charge/discharge current is less than 50mA. Apply 200% of the rated voltage for 1000T12 hours at the maximum operating temperature T3C. Let sit for 24T2 hours at room temperature, then measure. The charge/discharge current is less than 50mA. *Initial measurement. Apply 200% of the rated DC voltage for one hour at the maximum operating temperature T3C. Remove and let sit for 24T2 hours at room temperature. Perform initial measurement. PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. LLL/LLA/LLM Series Specifications and Test Methods (2) and Test Methods (2) LLL/LLA/LLM Series Specifications In case Non "*" is added in PNs table, please refer to LLL/LLA/LLM Series Specifications and Test Methods (1). In case "*" is added in PNs table, please refer to LLL/LLA/LLM Series Specifications and Test Methods (2). No. 1 Item Operating Temperature Range Specifications Test Method R6: -55 to +85C R7, C7: -55 to +125C C8: -55 to +105C 3 2 Rated Voltage See the previous pages. The rated voltage is defined as the maximum voltage which may be applied continuously to the capacitor. When AC voltage is superimposed on DC voltage, VP-P or VO-P, whichever is larger, should be maintained within the rated voltage range. 3 Appearance No defects or abnormalities Visual inspection 4 Dimensions Within the specified dimension Using calipers 5 Dielectric Strength No defects or abnormalities No failure should be observed when 250% of the rated voltage is applied between the terminations for 1 to 5 seconds, provided the charge/discharge current is less than 50mA. 6 Insulation Resistance 50 * F min. The insulation resistance should be measured with a DC voltage not exceeding the rated voltage at 25C and 75%RH max. and within 1 minute of charging. 7 Capacitance Within the specified tolerance 8 Dissipation Factor (D.F.) R6, R7, C7, C8: 0.120 max. Char. 9 10 Capacitance Temperature Characteristics Adhesive Strength of Termination R6 R7 C7 C8 Temp. Range (C) -55 to +85 -55 to +125 -55 to +125 -55 to +105 The capacitance/D.F. should be measured at 25C at the frequency and voltage shown in the table. Capacitance CV10F (10V min.) CV10F (6.3V max.) C>10F Reference Temp. Cap. Change 25C Within 15% Within 15% Within 22% Within 22% No removal of the terminations or other defect should occur. Appearance No defects or abnormalities Capacitance Within the specified tolerance 11 Vibration D.F. 12 Solderability of Termination R6, R7, C7, C8: 0.120 max. 75% of the terminations are to be soldered evenly and continuously. Appearance No marking defects Capacitance R6, R7, C7, C8: Within 7.5% Change Resistance 13 to Soldering D.F. R6, R7, C7, C8: 0.120 max. Heat I.R. 50 * F min. Dielectric No failure Strength Frequency 10.1kHz 10.1kHz 12024Hz Voltage 1.00.2Vrms 0.50.1Vrms 0.50.1Vrms The capacitance change should be measured after 5 min. at each specified temperature stage. The ranges of capacitance change compared with the 25C value over the temperature ranges shown in the table should be within the specified ranges. * Initial measurement. Perform a heat treatment at 150+0/-10C for one hour and then set for 242 hours at room temperature. Perform the initial measurement. Solder the capacitor to the test jig (glass epoxy board) using a eutectic solder. Then apply 10N* force in parallel with the test jig for 101 sec. The soldering should be done either with an iron or using the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock. *5N (LLL15, LLL18, LLA,LLM Series) Solder the capacitor to the test jig (glass epoxy board) in the same manner and under the same conditions as (10). The capacitor should be subjected to a simple harmonic motion having a total amplitude of 1.5mm, the frequency being varied uniformly between the approximate limits of 10 and 55Hz. The frequency range, from 10 to 55Hz and return to 10Hz, should be traversed in approximately 1 minute. This motion should be applied for a period of 2 hours in each of 3 mutually perpendicular directions (total of 6 hours). Immerse the capacitor in a solution of ethanol (JIS-K-8101) and rosin (JIS-K-5902) (25% rosin in weight proportion). Preheat at 80 to 120C for 10 to 30 seconds. After preheating, immerse in eutectic solder solution for 20.5 seconds at 2305C, or Sn-3.0Ag-0.5Cu solder solution for 20.5 seconds at 2455C. Preheat the capacitor at 120 to 150C for 1 minute. Immerse the capacitor in a eutectic solder or Sn-3.0Ag-0.5Cu solder solution at 2705C for 100.5 seconds. Let sit at room temperature for 242 hours, then measure. * Initial measurement. 0 Perform a heat treatment at 150+ -10C for one hour and then let sit for 242 hours at room temperature. Perform the initial measurement. Continued on the following page. 83 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. LLL/LLA/LLM Series Specifications and Test Methods (2) Continued from the preceding page. No. In case Non "*" is added in PNs table, please refer to LLL/LLA/LLM Series Specifications and Test Methods (1). In case "*" is added in PNs table, please refer to LLL/LLA/LLM Series Specifications and Test Methods (2). Item Specifications Appearance No marking defects Capacitance R6, R7, C7, C8: Within 12.5% Change 3 Temperature 14 Sudden Change Fix the capacitor to the supporting jig in the same manner and under the same conditions as (10).Perform the five cycles according to the four heat treatments listed in the following table. Let sit for 242 hours at room temperature, then measure. D.F. R6, R7, C7, C8: 0.120 max. I.R. 50 * F min. Dielectric Strength No failure * Initial measurement 0 -10C for one hour and then Perform a heat treatment at 150+ let sit for 242 hours at room temperature. Perform the initial measurement. Appearance No marking defects Apply the rated voltage at 402C and 90 to 95% humidity for 50012 hours. The charge/discharge current is less than 50mA. Apply the rated DC voltage. Capacitance R6, R7, C7, C8: Within 12.5% Change High Temperature High 15 Humidity (Steady State) Test Method D.F. 2 4 1 3 Min. Operating Room Min. Operating Room Temp. (C) 0 0 Temp. + Temp. Temp. + Temp. -3 -3 Time (min.) 303 2 to 3 303 2 to 3 Step R6, R7, C7, C8: 0.2 max. *Initial measurement 0 -10C for one hour and then Perform a heat treatment at 150+ let sit for 242 hours at room temperature. Perform the initial measurement. I.R. 12.5 * F min. *Measurement after test 0 Perform a heat treatment at 150+ -10C for one hour and then let sit for 242 hours at room temperature, then measure. Appearance No marking defects Capacitance R6, R7, C7, C8: Within 12.5% Change * LLL153C70G474: Within 20% D.F. R6, R7, C7, C8: 0.2 max. I.R. 25 * F min. 16 Durability Apply 150% of the rated voltage for 100012 hours at the maximum operating temperature 3C. The charge/discharge current is less than 50mA. *Initial measurement 0 Perform a heat treatment at 150+ -10C for one hour and then let sit for 242 hours at room temperature. Perform the initial measurement. *Measurement after test 0 Perform a heat treatment at 150+ -10C for one hour and then let sit for 242 hours at room temperature, then measure. 84 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Chip Monolithic Ceramic Capacitors High-Q Type GJM Series e Features g e 1. Mobile Telecommunication and RF module, mainly 2. Quality improvement of telephone call, Low power Consumption, yield ratio improvement T 4 Applications L W VCO, PA, Mobile Telecommunication Part Number GJM03 GJM15 Dimensions (mm) L W T e 0.6 0.03 0.3 0.03 0.3 0.03 0.1 to 0.2 1.0 0.05 0.5 0.05 0.5 0.05 0.15 to 0.3 g min. 0.2 0.4 85 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Capacitance Table Temperature Compensating Type C0G(5C)/C0H(6C) Characteristics 3 ex.3: T Dimension [mm] LxW [mm] 0.6x0.3 (03) <0201> Rated Voltage 25 [Vdc] (1A) Capacitance 0.1pF(R10) 4 6.3 (0J) 1.0x0.5 (15) <0402> 50 (1H) LxW [mm] Rated Voltage 25 [Vdc] (1A) Capacitance 6.3 (0J) 1.0x0.5 (15) <0402> 50 (1H) LxW [mm] 0.6x0.3 (03) <0201> Rated Voltage 25 [Vdc] (1A) Capacitance 6.3 (0J) 1.0x0.5 (15) <0402> 50 (1H) 5 5.0pF(5R0) 3 5 9.9pF(9R9) 3 5 0.2pF(R20) 3 5 5.1pF(5R1) 3 5 10pF(100) 3 5 0.3pF(R30) 3 5 5.2pF(5R2) 3 5 11pF(110) 3 5 0.4pF(R40) 3 5 5.3pF(5R3) 3 5 12pF(120) 3 5 0.5pF(R50) 3 5 5.4pF(5R4) 3 5 13pF(130) 3 5 0.6pF(R60) 3 5 5.5pF(5R5) 3 5 15pF(150) 3 5 0.7pF(R70) 3 5 5.6pF(5R6) 3 5 16pF(160) 3 5 0.8pF(R80) 3 5 5.7pF(5R7) 3 5 18pF(180) 3 5 0.9pF(R90) 3 5 5.8pF(5R8) 3 5 20pF(200) 3 1.0pF(1R0) 3 5 5.9pF(5R9) 3 5 22pF(220) 3 1.1pF(1R1) 3 5 6.0pF(6R0) 3 5 24pF(240) 3 1.2pF(1R2) 3 5 6.1pF(6R1) 3 5 27pF(270) 3 1.3pF(1R3) 3 5 6.2pF(6R2) 3 5 30pF(300) 3 1.4pF(1R4) 3 5 6.3pF(6R3) 3 5 33pF(330) 3 1.5pF(1R5) 3 5 6.4pF(6R4) 3 5 1.6pF(1R6) 3 5 6.5pF(6R5) 3 5 1.7pF(1R7) 3 5 6.6pF(6R6) 3 5 1.8pF(1R8) 3 5 6.7pF(6R7) 3 5 1.9pF(1R9) 3 5 6.8pF(6R8) 3 5 2.0pF(2R0) 3 5 6.9pF(6R9) 3 5 2.1pF(2R1) 3 5 7.0pF(7R0) 3 5 2.2pF(2R2) 3 5 7.1pF(7R1) 3 5 2.3pF(2R3) 3 5 7.2pF(7R2) 3 5 2.4pF(2R4) 3 5 7.3pF(7R3) 3 5 2.5pF(2R5) 3 5 7.4pF(7R4) 3 5 2.6pF(2R6) 3 5 7.5pF(7R5) 3 5 2.7pF(2R7) 3 5 7.6pF(7R6) 3 5 2.8pF(2R8) 3 5 7.7pF(7R7) 3 5 2.9pF(2R9) 3 5 7.8pF(7R8) 3 5 3.0pF(3R0) 3 5 7.9pF(7R9) 3 5 3.1pF(3R1) 3 5 8.0pF(8R0) 3 5 3.2pF(3R2) 3 5 8.1pF(8R1) 3 5 3.3pF(3R3) 3 5 8.2pF(8R2) 3 5 3.4pF(3R4) 3 5 8.3pF(8R3) 3 5 3.5pF(3R5) 3 5 8.4pF(8R4) 3 5 3.6pF(3R6) 3 5 8.5pF(8R5) 3 5 3.7pF(3R7) 3 5 8.6pF(8R6) 3 5 3.8pF(3R8) 3 5 8.7pF(8R7) 3 5 3.9pF(3R9) 3 5 8.8pF(8R8) 3 5 4.0pF(4R0) 3 5 8.9pF(8R9) 3 5 4.1pF(4R1) 3 5 9.0pF(9R0) 3 5 4.2pF(4R2) 3 5 9.1pF(9R1) 3 5 4.3pF(4R3) 3 5 9.2pF(9R2) 3 5 4.4pF(4R4) 3 5 9.3pF(9R3) 3 5 4.5pF(4R5) 3 5 9.4pF(9R4) 3 5 4.6pF(4R6) 3 5 9.5pF(9R5) 3 5 4.7pF(4R7) 3 5 9.6pF(9R6) 3 5 4.8pF(4R8) 3 5 9.7pF(9R7) 3 5 4.9pF(4R9) 3 5 9.8pF(9R8) 3 5 The part number code is shown in ( ) and Unit is shown in [ ]. 86 0.6x0.3 (03) <0201> < >: EIA [inch] Code 5 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Temperature Compensating Type C0G(5C) Characteristics LxW [mm] 0.6x0.3(03)<0201> 1.0x0.5(15)<0402> 25(1E) 50(1H) Rated Volt. [Vdc] Capacitance Tolerance Part Number 0.1pF(R10) 0.05pF(W) 0.2pF(R20) 0.05pF(W) 0.1pF(B) GJM0335C1ER20BB01D GJM1555C1HR20BB01D 0.3pF(R30) 0.05pF(W) GJM0335C1ER30WB01D GJM1555C1HR30WB01D 0.1pF(B) GJM0335C1ER30BB01D GJM1555C1HR30BB01D 0.05pF(W) GJM0335C1ER40WB01D GJM1555C1HR40WB01D 0.1pF(B) GJM0335C1ER40BB01D GJM1555C1HR40BB01D 0.5pF(R50) 0.05pF(W) GJM0335C1ER50WB01D GJM1555C1HR50WB01D 0.1pF(B) GJM0335C1ER50BB01D GJM1555C1HR50BB01D 0.6pF(R60) 0.05pF(W) GJM0335C1ER60WB01D GJM1555C1HR60WB01D 0.1pF(B) GJM0335C1ER60BB01D GJM1555C1HR60BB01D 0.7pF(R70) 0.05pF(W) GJM0335C1ER70WB01D GJM1555C1HR70WB01D 0.1pF(B) GJM0335C1ER70BB01D GJM1555C1HR70BB01D 0.8pF(R80) 0.05pF(W) GJM0335C1ER80WB01D GJM1555C1HR80WB01D 0.1pF(B) GJM0335C1ER80BB01D GJM1555C1HR80BB01D 0.05pF(W) GJM0335C1ER90WB01D GJM1555C1HR90WB01D 0.1pF(B) GJM0335C1ER90BB01D GJM1555C1HR90BB01D 0.05pF(W) GJM0335C1E1R0WB01D GJM1555C1H1R0WB01D GJM1555C1H1R0BB01D GJM1555C1HR10WB01D 0.1pF(B) 0.4pF(R40) 0.9pF(R90) 1.0pF(1R0) 1.1pF(1R1) 1.2pF(1R2) 1.3pF(1R3) 1.4pF(1R4) 1.5pF(1R5) 1.6pF(1R6) 1.7pF(1R7) 1.8pF(1R8) 1.9pF(1R9) 2.0pF(2R0) GJM1555C1HR10BB01D GJM0335C1ER20WB01D GJM1555C1HR20WB01D 0.1pF(B) GJM0335C1E1R0BB01D 0.25pF(C) GJM0335C1E1R0CB01D GJM1555C1H1R0CB01D 0.05pF(W) GJM0335C1E1R1WB01D GJM1555C1H1R1WB01D GJM1555C1H1R1BB01D 0.1pF(B) GJM0335C1E1R1BB01D 0.25pF(C) GJM0335C1E1R1CB01D GJM1555C1H1R1CB01D 0.05pF(W) GJM0335C1E1R2WB01D GJM1555C1H1R2WB01D GJM1555C1H1R2BB01D 0.1pF(B) GJM0335C1E1R2BB01D 0.25pF(C) GJM0335C1E1R2CB01D GJM1555C1H1R2CB01D 0.05pF(W) GJM0335C1E1R3WB01D GJM1555C1H1R3WB01D GJM1555C1H1R3BB01D 0.1pF(B) GJM0335C1E1R3BB01D 0.25pF(C) GJM0335C1E1R3CB01D GJM1555C1H1R3CB01D 0.05pF(W) GJM0335C1E1R4WB01D GJM1555C1H1R4WB01D 0.1pF(B) GJM0335C1E1R4BB01D GJM1555C1H1R4BB01D 0.25pF(C) GJM0335C1E1R4CB01D GJM1555C1H1R4CB01D 0.05pF(W) GJM0335C1E1R5WB01D GJM1555C1H1R5WB01D GJM1555C1H1R5BB01D 0.1pF(B) GJM0335C1E1R5BB01D 0.25pF(C) GJM0335C1E1R5CB01D GJM1555C1H1R5CB01D 0.05pF(W) GJM0335C1E1R6WB01D GJM1555C1H1R6WB01D GJM1555C1H1R6BB01D 0.1pF(B) GJM0335C1E1R6BB01D 0.25pF(C) GJM0335C1E1R6CB01D GJM1555C1H1R6CB01D 0.05pF(W) GJM0335C1E1R7WB01D GJM1555C1H1R7WB01D GJM1555C1H1R7BB01D 0.1pF(B) GJM0335C1E1R7BB01D 0.25pF(C) GJM0335C1E1R7CB01D GJM1555C1H1R7CB01D 0.05pF(W) GJM0335C1E1R8WB01D GJM1555C1H1R8WB01D GJM1555C1H1R8BB01D 0.1pF(B) GJM0335C1E1R8BB01D 0.25pF(C) GJM0335C1E1R8CB01D GJM1555C1H1R8CB01D 0.05pF(W) GJM0335C1E1R9WB01D GJM1555C1H1R9WB01D 0.1pF(B) GJM0335C1E1R9BB01D GJM1555C1H1R9BB01D 0.25pF(C) GJM0335C1E1R9CB01D GJM1555C1H1R9CB01D 0.05pF(W) GJM0335C1E2R0WB01D GJM1555C1H2R0WB01D 0.1pF(B) GJM0335C1E2R0BB01D GJM1555C1H2R0BB01D 0.25pF(C) GJM0335C1E2R0CB01D GJM1555C1H2R0CB01D The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code qProduct ID wSeries tTemperature Characteristics u i o !0 iCapacitance Tolerance q w e r t y Packaging Code in Part Number is a code shows STD 180mm Reel Taping. (Part Number) GJ M 03 3 5C 1E R20 W 4 B01 D eDimension (LxW) yRated Voltage oIndividual Specification Code rDimension (T) uCapacitance !0Packaging 87 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Temperature Compensating Type C0G(5C) Characteristics LxW [mm] 0.6x0.3(03)<0201> 1.0x0.5(15)<0402> 25(1E) 50(1H) Rated Volt. [Vdc] Capacitance Tolerance 2.1pF(2R1) 2.2pF(2R2) 4 2.3pF(2R3) 2.4pF(2R4) 2.5pF(2R5) 2.6pF(2R6) 2.7pF(2R7) 2.8pF(2R8) 2.9pF(2R9) 3.0pF(3R0) 3.1pF(3R1) 3.2pF(3R2) 3.3pF(3R3) 3.4pF(3R4) 3.5pF(3R5) 3.6pF(3R6) Part Number 0.05pF(W) GJM0335C1E2R1WB01D GJM1555C1H2R1WB01D 0.1pF(B) GJM0335C1E2R1BB01D GJM1555C1H2R1BB01D 0.25pF(C) GJM0335C1E2R1CB01D GJM1555C1H2R1CB01D 0.05pF(W) GJM0335C1E2R2WB01D GJM1555C1H2R2WB01D 0.1pF(B) GJM0335C1E2R2BB01D GJM1555C1H2R2BB01D 0.25pF(C) GJM0335C1E2R2CB01D GJM1555C1H2R2CB01D 0.05pF(W) GJM0335C1E2R3WB01D GJM1555C1H2R3WB01D GJM1555C1H2R3BB01D 0.1pF(B) GJM0335C1E2R3BB01D 0.25pF(C) GJM0335C1E2R3CB01D GJM1555C1H2R3CB01D 0.05pF(W) GJM0335C1E2R4WB01D GJM1555C1H2R4WB01D GJM1555C1H2R4BB01D 0.1pF(B) GJM0335C1E2R4BB01D 0.25pF(C) GJM0335C1E2R4CB01D GJM1555C1H2R4CB01D 0.05pF(W) GJM0335C1E2R5WB01D GJM1555C1H2R5WB01D GJM1555C1H2R5BB01D 0.1pF(B) GJM0335C1E2R5BB01D 0.25pF(C) GJM0335C1E2R5CB01D GJM1555C1H2R5CB01D 0.05pF(W) GJM0335C1E2R6WB01D GJM1555C1H2R6WB01D GJM1555C1H2R6BB01D 0.1pF(B) GJM0335C1E2R6BB01D 0.25pF(C) GJM0335C1E2R6CB01D GJM1555C1H2R6CB01D 0.05pF(W) GJM0335C1E2R7WB01D GJM1555C1H2R7WB01D 0.1pF(B) GJM0335C1E2R7BB01D GJM1555C1H2R7BB01D 0.25pF(C) GJM0335C1E2R7CB01D GJM1555C1H2R7CB01D 0.05pF(W) GJM0335C1E2R8WB01D GJM1555C1H2R8WB01D 0.1pF(B) GJM0335C1E2R8BB01D GJM1555C1H2R8BB01D 0.25pF(C) GJM0335C1E2R8CB01D GJM1555C1H2R8CB01D 0.05pF(W) GJM0335C1E2R9WB01D GJM1555C1H2R9WB01D 0.1pF(B) GJM0335C1E2R9BB01D GJM1555C1H2R9BB01D 0.25pF(C) GJM0335C1E2R9CB01D GJM1555C1H2R9CB01D 0.05pF(W) GJM0335C1E3R0WB01D GJM1555C1H3R0WB01D GJM1555C1H3R0BB01D 0.1pF(B) GJM0335C1E3R0BB01D 0.25pF(C) GJM0335C1E3R0CB01D GJM1555C1H3R0CB01D 0.05pF(W) GJM0335C1E3R1WB01D GJM1555C1H3R1WB01D 0.1pF(B) GJM0335C1E3R1BB01D GJM1555C1H3R1BB01D 0.25pF(C) GJM0335C1E3R1CB01D GJM1555C1H3R1CB01D 0.05pF(W) GJM0335C1E3R2WB01D GJM1555C1H3R2WB01D GJM1555C1H3R2BB01D 0.1pF(B) GJM0335C1E3R2BB01D 0.25pF(C) GJM0335C1E3R2CB01D GJM1555C1H3R2CB01D 0.05pF(W) GJM0335C1E3R3WB01D GJM1555C1H3R3WB01D GJM1555C1H3R3BB01D 0.1pF(B) GJM0335C1E3R3BB01D 0.25pF(C) GJM0335C1E3R3CB01D GJM1555C1H3R3CB01D 0.05pF(W) GJM0335C1E3R4WB01D GJM1555C1H3R4WB01D 0.1pF(B) GJM0335C1E3R4BB01D GJM1555C1H3R4BB01D 0.25pF(C) GJM0335C1E3R4CB01D GJM1555C1H3R4CB01D 0.05pF(W) GJM0335C1E3R5WB01D GJM1555C1H3R5WB01D 0.1pF(B) GJM0335C1E3R5BB01D GJM1555C1H3R5BB01D 0.25pF(C) GJM0335C1E3R5CB01D GJM1555C1H3R5CB01D 0.05pF(W) GJM0335C1E3R6WB01D GJM1555C1H3R6WB01D 0.1pF(B) GJM0335C1E3R6BB01D GJM1555C1H3R6BB01D 0.25pF(C) GJM0335C1E3R6CB01D GJM1555C1H3R6CB01D The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code qProduct ID wSeries tTemperature Characteristics u i o !0 iCapacitance Tolerance q w e r t y Packaging Code in Part Number is a code shows STD 180mm Reel Taping. (Part Number) GJ 88 M 03 3 5C 1E 2R1 W B01 D eDimension (LxW) yRated Voltage oIndividual Specification Code rDimension (T) uCapacitance !0Packaging PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Temperature Compensating Type C0G(5C) Characteristics LxW [mm] Rated Volt. [Vdc] Capacitance 3.7pF(3R7) 3.8pF(3R8) 3.9pF(3R9) 4.0pF(4R0) 4.1pF(4R1) 4.2pF(4R2) 4.3pF(4R3) 4.4pF(4R4) 4.5pF(4R5) 4.6pF(4R6) 4.7pF(4R7) 4.8pF(4R8) 4.9pF(4R9) 5.0pF(5R0) 5.1pF(5R1) 5.2pF(5R2) 0.6x0.3(03)<0201> 1.0x0.5(15)<0402> 25(1E) 50(1H) Tolerance Part Number 0.05pF(W) GJM0335C1E3R7WB01D GJM1555C1H3R7WB01D 0.1pF(B) GJM0335C1E3R7BB01D GJM1555C1H3R7BB01D 0.25pF(C) GJM0335C1E3R7CB01D GJM1555C1H3R7CB01D 0.05pF(W) GJM0335C1E3R8WB01D GJM1555C1H3R8WB01D 0.1pF(B) GJM0335C1E3R8BB01D GJM1555C1H3R8BB01D 0.25pF(C) GJM0335C1E3R8CB01D GJM1555C1H3R8CB01D 0.05pF(W) GJM0335C1E3R9WB01D GJM1555C1H3R9WB01D GJM1555C1H3R9BB01D 0.1pF(B) GJM0335C1E3R9BB01D 0.25pF(C) GJM0335C1E3R9CB01D GJM1555C1H3R9CB01D 0.05pF(W) GJM0335C1E4R0WB01D GJM1555C1H4R0WB01D GJM1555C1H4R0BB01D 0.1pF(B) GJM0335C1E4R0BB01D 0.25pF(C) GJM0335C1E4R0CB01D GJM1555C1H4R0CB01D 0.05pF(W) GJM0335C1E4R1WB01D GJM1555C1H4R1WB01D GJM1555C1H4R1BB01D 0.1pF(B) GJM0335C1E4R1BB01D 0.25pF(C) GJM0335C1E4R1CB01D GJM1555C1H4R1CB01D 0.05pF(W) GJM0335C1E4R2WB01D GJM1555C1H4R2WB01D GJM1555C1H4R2BB01D 0.1pF(B) GJM0335C1E4R2BB01D 0.25pF(C) GJM0335C1E4R2CB01D GJM1555C1H4R2CB01D 0.05pF(W) GJM0335C1E4R3WB01D GJM1555C1H4R3WB01D 0.1pF(B) GJM0335C1E4R3BB01D GJM1555C1H4R3BB01D 0.25pF(C) GJM0335C1E4R3CB01D GJM1555C1H4R3CB01D 0.05pF(W) GJM0335C1E4R4WB01D GJM1555C1H4R4WB01D 0.1pF(B) GJM0335C1E4R4BB01D GJM1555C1H4R4BB01D 0.25pF(C) GJM0335C1E4R4CB01D GJM1555C1H4R4CB01D 0.05pF(W) GJM0335C1E4R5WB01D GJM1555C1H4R5WB01D 0.1pF(B) GJM0335C1E4R5BB01D GJM1555C1H4R5BB01D 0.25pF(C) GJM0335C1E4R5CB01D GJM1555C1H4R5CB01D 0.05pF(W) GJM0335C1E4R6WB01D GJM1555C1H4R6WB01D GJM1555C1H4R6BB01D 0.1pF(B) GJM0335C1E4R6BB01D 0.25pF(C) GJM0335C1E4R6CB01D GJM1555C1H4R6CB01D 0.05pF(W) GJM0335C1E4R7WB01D GJM1555C1H4R7WB01D 0.1pF(B) GJM0335C1E4R7BB01D GJM1555C1H4R7BB01D 0.25pF(C) GJM0335C1E4R7CB01D GJM1555C1H4R7CB01D 0.05pF(W) GJM0335C1E4R8WB01D GJM1555C1H4R8WB01D GJM1555C1H4R8BB01D 0.1pF(B) GJM0335C1E4R8BB01D 0.25pF(C) GJM0335C1E4R8CB01D GJM1555C1H4R8CB01D 0.05pF(W) GJM0335C1E4R9WB01D GJM1555C1H4R9WB01D GJM1555C1H4R9BB01D 0.1pF(B) GJM0335C1E4R9BB01D 0.25pF(C) GJM0335C1E4R9CB01D GJM1555C1H4R9CB01D 0.05pF(W) GJM0335C1E5R0WB01D GJM1555C1H5R0WB01D 0.1pF(B) GJM0335C1E5R0BB01D GJM1555C1H5R0BB01D 0.25pF(C) GJM0335C1E5R0CB01D GJM1555C1H5R0CB01D 0.05pF(W) GJM0335C1E5R1WB01D GJM1555C1H5R1WB01D 0.1pF(B) GJM0335C1E5R1BB01D GJM1555C1H5R1BB01D 0.25pF(C) GJM0335C1E5R1CB01D GJM1555C1H5R1CB01D 0.5pF(D) GJM0335C1E5R1DB01D GJM1555C1H5R1DB01D 0.05pF(W) GJM0335C1E5R2WB01D GJM1555C1H5R2WB01D 0.1pF(B) GJM0335C1E5R2BB01D GJM1555C1H5R2BB01D 0.25pF(C) GJM0335C1E5R2CB01D GJM1555C1H5R2CB01D 0.5pF(D) GJM0335C1E5R2DB01D GJM1555C1H5R2DB01D The part number code is shown in ( ) and Unit is shown in [ ]. 4 < >: EIA [inch] Code 89 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Temperature Compensating Type C0G(5C) Characteristics LxW [mm] 0.6x0.3(03)<0201> 1.0x0.5(15)<0402> 25(1E) 50(1H) Rated Volt. [Vdc] Capacitance Tolerance 5.3pF(5R3) 4 5.4pF(5R4) 5.5pF(5R5) 5.6pF(5R6) 5.7pF(5R7) 5.8pF(5R8) 5.9pF(5R9) 6.0pF(6R0) 6.1pF(6R1) 6.2pF(6R2) 6.3pF(6R3) 6.4pF(6R4) Part Number 0.05pF(W) GJM0335C1E5R3WB01D GJM1555C1H5R3WB01D 0.1pF(B) GJM0335C1E5R3BB01D GJM1555C1H5R3BB01D 0.25pF(C) GJM0335C1E5R3CB01D GJM1555C1H5R3CB01D 0.5pF(D) GJM0335C1E5R3DB01D GJM1555C1H5R3DB01D 0.05pF(W) GJM0335C1E5R4WB01D GJM1555C1H5R4WB01D 0.1pF(B) GJM0335C1E5R4BB01D GJM1555C1H5R4BB01D 0.25pF(C) GJM0335C1E5R4CB01D GJM1555C1H5R4CB01D 0.5pF(D) GJM0335C1E5R4DB01D GJM1555C1H5R4DB01D 0.05pF(W) GJM0335C1E5R5WB01D GJM1555C1H5R5WB01D 0.1pF(B) GJM0335C1E5R5BB01D GJM1555C1H5R5BB01D 0.25pF(C) GJM0335C1E5R5CB01D GJM1555C1H5R5CB01D 0.5pF(D) GJM0335C1E5R5DB01D GJM1555C1H5R5DB01D 0.05pF(W) GJM0335C1E5R6WB01D GJM1555C1H5R6WB01D 0.1pF(B) GJM0335C1E5R6BB01D GJM1555C1H5R6BB01D 0.25pF(C) GJM0335C1E5R6CB01D GJM1555C1H5R6CB01D 0.5pF(D) GJM0335C1E5R6DB01D GJM1555C1H5R6DB01D 0.05pF(W) GJM0335C1E5R7WB01D GJM1555C1H5R7WB01D 0.1pF(B) GJM0335C1E5R7BB01D GJM1555C1H5R7BB01D 0.25pF(C) GJM0335C1E5R7CB01D GJM1555C1H5R7CB01D 0.5pF(D) GJM0335C1E5R7DB01D GJM1555C1H5R7DB01D 0.05pF(W) GJM0335C1E5R8WB01D GJM1555C1H5R8WB01D 0.1pF(B) GJM0335C1E5R8BB01D GJM1555C1H5R8BB01D 0.25pF(C) GJM0335C1E5R8CB01D GJM1555C1H5R8CB01D 0.5pF(D) GJM0335C1E5R8DB01D GJM1555C1H5R8DB01D 0.05pF(W) GJM0335C1E5R9WB01D GJM1555C1H5R9WB01D 0.1pF(B) GJM0335C1E5R9BB01D GJM1555C1H5R9BB01D 0.25pF(C) GJM0335C1E5R9CB01D GJM1555C1H5R9CB01D 0.5pF(D) GJM0335C1E5R9DB01D GJM1555C1H5R9DB01D 0.05pF(W) GJM0335C1E6R0WB01D GJM1555C1H6R0WB01D 0.1pF(B) GJM0335C1E6R0BB01D GJM1555C1H6R0BB01D 0.25pF(C) GJM0335C1E6R0CB01D GJM1555C1H6R0CB01D 0.5pF(D) GJM0335C1E6R0DB01D GJM1555C1H6R0DB01D 0.05pF(W) GJM0335C1E6R1WB01D GJM1555C1H6R1WB01D 0.1pF(B) GJM0335C1E6R1BB01D GJM1555C1H6R1BB01D 0.25pF(C) GJM0335C1E6R1CB01D GJM1555C1H6R1CB01D 0.5pF(D) GJM0335C1E6R1DB01D GJM1555C1H6R1DB01D 0.05pF(W) GJM0335C1E6R2WB01D GJM1555C1H6R2WB01D 0.1pF(B) GJM0335C1E6R2BB01D GJM1555C1H6R2BB01D 0.25pF(C) GJM0335C1E6R2CB01D GJM1555C1H6R2CB01D 0.5pF(D) GJM0335C1E6R2DB01D GJM1555C1H6R2DB01D 0.05pF(W) GJM0335C1E6R3WB01D GJM1555C1H6R3WB01D 0.1pF(B) GJM0335C1E6R3BB01D GJM1555C1H6R3BB01D 0.25pF(C) GJM0335C1E6R3CB01D GJM1555C1H6R3CB01D 0.5pF(D) GJM0335C1E6R3DB01D GJM1555C1H6R3DB01D 0.05pF(W) GJM0335C1E6R4WB01D GJM1555C1H6R4WB01D 0.1pF(B) GJM0335C1E6R4BB01D GJM1555C1H6R4BB01D 0.25pF(C) GJM0335C1E6R4CB01D GJM1555C1H6R4CB01D 0.5pF(D) GJM0335C1E6R4DB01D GJM1555C1H6R4DB01D The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code qProduct ID wSeries tTemperature Characteristics u i o !0 iCapacitance Tolerance q w e r t y Packaging Code in Part Number is a code shows STD 180mm Reel Taping. (Part Number) GJ 90 M 03 3 5C 1E 5R3 W B01 D eDimension (LxW) yRated Voltage oIndividual Specification Code rDimension (T) uCapacitance !0Packaging PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Temperature Compensating Type C0G(5C)/C0H(6C) Characteristics LxW [mm] Rated Volt. [Vdc] Capacitance 6.5pF(6R5) 6.6pF(6R6) 6.7pF(6R7) 6.8pF(6R8) 6.9pF(6R9) 7.0pF(7R0) 7.1pF(7R1) 7.2pF(7R2) 7.3pF(7R3) 7.4pF(7R4) 7.5pF(7R5) 7.6pF(7R6) 7.7pF(7R7) 0.6x0.3(03)<0201> 1.0x0.5(15)<0402> 25(1E) 50(1H) Tolerance Part Number 0.05pF(W) GJM0335C1E6R5WB01D GJM1555C1H6R5WB01D 0.1pF(B) GJM0335C1E6R5BB01D GJM1555C1H6R5BB01D 0.25pF(C) GJM0335C1E6R5CB01D GJM1555C1H6R5CB01D 0.5pF(D) GJM0335C1E6R5DB01D GJM1555C1H6R5DB01D 0.05pF(W) GJM0335C1E6R6WB01D GJM1555C1H6R6WB01D 0.1pF(B) GJM0335C1E6R6BB01D GJM1555C1H6R6BB01D 0.25pF(C) GJM0335C1E6R6CB01D GJM1555C1H6R6CB01D 0.5pF(D) GJM0335C1E6R6DB01D GJM1555C1H6R6DB01D 0.05pF(W) GJM0335C1E6R7WB01D GJM1555C1H6R7WB01D 0.1pF(B) GJM0335C1E6R7BB01D GJM1555C1H6R7BB01D 0.25pF(C) GJM0335C1E6R7CB01D GJM1555C1H6R7CB01D 0.5pF(D) GJM0335C1E6R7DB01D GJM1555C1H6R7DB01D 0.05pF(W) GJM0335C1E6R8WB01D GJM1555C1H6R8WB01D 0.1pF(B) GJM0335C1E6R8BB01D GJM1555C1H6R8BB01D 0.25pF(C) GJM0335C1E6R8CB01D GJM1555C1H6R8CB01D 0.5pF(D) GJM0335C1E6R8DB01D GJM1555C1H6R8DB01D 0.05pF(W) GJM0336C1E6R9WB01D GJM1555C1H6R9WB01D 0.1pF(B) GJM0336C1E6R9BB01D GJM1555C1H6R9BB01D 0.25pF(C) GJM0336C1E6R9CB01D GJM1555C1H6R9CB01D 0.5pF(D) GJM0336C1E6R9DB01D GJM1555C1H6R9DB01D 0.05pF(W) GJM0336C1E7R0WB01D GJM1555C1H7R0WB01D 0.1pF(B) GJM0336C1E7R0BB01D GJM1555C1H7R0BB01D 0.25pF(C) GJM0336C1E7R0CB01D GJM1555C1H7R0CB01D 0.5pF(D) GJM0336C1E7R0DB01D GJM1555C1H7R0DB01D 0.05pF(W) GJM0336C1E7R1WB01D GJM1555C1H7R1WB01D 0.1pF(B) GJM0336C1E7R1BB01D GJM1555C1H7R1BB01D 0.25pF(C) GJM0336C1E7R1CB01D GJM1555C1H7R1CB01D 0.5pF(D) GJM0336C1E7R1DB01D GJM1555C1H7R1DB01D 0.05pF(W) GJM0336C1E7R2WB01D GJM1555C1H7R2WB01D 0.1pF(B) GJM0336C1E7R2BB01D GJM1555C1H7R2BB01D 0.25pF(C) GJM0336C1E7R2CB01D GJM1555C1H7R2CB01D 0.5pF(D) GJM0336C1E7R2DB01D GJM1555C1H7R2DB01D 0.05pF(W) GJM0336C1E7R3WB01D GJM1555C1H7R3WB01D 0.1pF(B) GJM0336C1E7R3BB01D GJM1555C1H7R3BB01D 0.25pF(C) GJM0336C1E7R3CB01D GJM1555C1H7R3CB01D 0.5pF(D) GJM0336C1E7R3DB01D GJM1555C1H7R3DB01D 0.05pF(W) GJM0336C1E7R4WB01D GJM1555C1H7R4WB01D 0.1pF(B) GJM0336C1E7R4BB01D GJM1555C1H7R4BB01D 0.25pF(C) GJM0336C1E7R4CB01D GJM1555C1H7R4CB01D 0.5pF(D) GJM0336C1E7R4DB01D GJM1555C1H7R4DB01D 0.05pF(W) GJM0336C1E7R5WB01D GJM1555C1H7R5WB01D 0.1pF(B) GJM0336C1E7R5BB01D GJM1555C1H7R5BB01D 0.25pF(C) GJM0336C1E7R5CB01D GJM1555C1H7R5CB01D 0.5pF(D) GJM0336C1E7R5DB01D GJM1555C1H7R5DB01D 0.05pF(W) GJM0336C1E7R6WB01D GJM1555C1H7R6WB01D 0.1pF(B) GJM0336C1E7R6BB01D GJM1555C1H7R6BB01D 0.25pF(C) GJM0336C1E7R6CB01D GJM1555C1H7R6CB01D 0.5pF(D) GJM0336C1E7R6DB01D GJM1555C1H7R6DB01D 0.05pF(W) GJM0336C1E7R7WB01D GJM1555C1H7R7WB01D 0.1pF(B) GJM0336C1E7R7BB01D GJM1555C1H7R7BB01D 0.25pF(C) GJM0336C1E7R7CB01D GJM1555C1H7R7CB01D 0.5pF(D) GJM0336C1E7R7DB01D GJM1555C1H7R7DB01D The part number code is shown in ( ) and Unit is shown in [ ]. 4 < >: EIA [inch] Code 91 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Temperature Compensating Type C0G(5C)/C0H(6C) Characteristics LxW [mm] 0.6x0.3(03)<0201> 1.0x0.5(15)<0402> 25(1E) 50(1H) Rated Volt. [Vdc] Capacitance Tolerance 7.8pF(7R8) 4 7.9pF(7R9) 8.0pF(8R0) 8.1pF(8R1) 8.2pF(8R2) 8.3pF(8R3) 8.4pF(8R4) 8.5pF(8R5) 8.6pF(8R6) 8.7pF(8R7) 8.8pF(8R8) 8.9pF(8R9) Part Number 0.05pF(W) GJM0336C1E7R8WB01D GJM1555C1H7R8WB01D 0.1pF(B) GJM0336C1E7R8BB01D GJM1555C1H7R8BB01D 0.25pF(C) GJM0336C1E7R8CB01D GJM1555C1H7R8CB01D 0.5pF(D) GJM0336C1E7R8DB01D GJM1555C1H7R8DB01D 0.05pF(W) GJM0336C1E7R9WB01D GJM1555C1H7R9WB01D 0.1pF(B) GJM0336C1E7R9BB01D GJM1555C1H7R9BB01D 0.25pF(C) GJM0336C1E7R9CB01D GJM1555C1H7R9CB01D 0.5pF(D) GJM0336C1E7R9DB01D GJM1555C1H7R9DB01D 0.05pF(W) GJM0336C1E8R0WB01D GJM1555C1H8R0WB01D 0.1pF(B) GJM0336C1E8R0BB01D GJM1555C1H8R0BB01D 0.25pF(C) GJM0336C1E8R0CB01D GJM1555C1H8R0CB01D 0.5pF(D) GJM0336C1E8R0DB01D GJM1555C1H8R0DB01D 0.05pF(W) GJM0336C1E8R1WB01D GJM1555C1H8R1WB01D 0.1pF(B) GJM0336C1E8R1BB01D GJM1555C1H8R1BB01D 0.25pF(C) GJM0336C1E8R1CB01D GJM1555C1H8R1CB01D 0.5pF(D) GJM0336C1E8R1DB01D GJM1555C1H8R1DB01D 0.05pF(W) GJM0336C1E8R2WB01D GJM1555C1H8R2WB01D 0.1pF(B) GJM0336C1E8R2BB01D GJM1555C1H8R2BB01D 0.25pF(C) GJM0336C1E8R2CB01D GJM1555C1H8R2CB01D 0.5pF(D) GJM0336C1E8R2DB01D GJM1555C1H8R2DB01D 0.05pF(W) GJM0336C1E8R3WB01D GJM1555C1H8R3WB01D 0.1pF(B) GJM0336C1E8R3BB01D GJM1555C1H8R3BB01D 0.25pF(C) GJM0336C1E8R3CB01D GJM1555C1H8R3CB01D 0.5pF(D) GJM0336C1E8R3DB01D GJM1555C1H8R3DB01D 0.05pF(W) GJM0336C1E8R4WB01D GJM1555C1H8R4WB01D 0.1pF(B) GJM0336C1E8R4BB01D GJM1555C1H8R4BB01D 0.25pF(C) GJM0336C1E8R4CB01D GJM1555C1H8R4CB01D 0.5pF(D) GJM0336C1E8R4DB01D GJM1555C1H8R4DB01D 0.05pF(W) GJM0336C1E8R5WB01D GJM1555C1H8R5WB01D 0.1pF(B) GJM0336C1E8R5BB01D GJM1555C1H8R5BB01D 0.25pF(C) GJM0336C1E8R5CB01D GJM1555C1H8R5CB01D 0.5pF(D) GJM0336C1E8R5DB01D GJM1555C1H8R5DB01D 0.05pF(W) GJM0336C1E8R6WB01D GJM1555C1H8R6WB01D 0.1pF(B) GJM0336C1E8R6BB01D GJM1555C1H8R6BB01D 0.25pF(C) GJM0336C1E8R6CB01D GJM1555C1H8R6CB01D 0.5pF(D) GJM0336C1E8R6DB01D GJM1555C1H8R6DB01D 0.05pF(W) GJM0336C1E8R7WB01D GJM1555C1H8R7WB01D 0.1pF(B) GJM0336C1E8R7BB01D GJM1555C1H8R7BB01D 0.25pF(C) GJM0336C1E8R7CB01D GJM1555C1H8R7CB01D 0.5pF(D) GJM0336C1E8R7DB01D GJM1555C1H8R7DB01D 0.05pF(W) GJM0336C1E8R8WB01D GJM1555C1H8R8WB01D 0.1pF(B) GJM0336C1E8R8BB01D GJM1555C1H8R8BB01D 0.25pF(C) GJM0336C1E8R8CB01D GJM1555C1H8R8CB01D 0.5pF(D) GJM0336C1E8R8DB01D GJM1555C1H8R8DB01D 0.05pF(W) GJM0336C1E8R9WB01D GJM1555C1H8R9WB01D 0.1pF(B) GJM0336C1E8R9BB01D GJM1555C1H8R9BB01D 0.25pF(C) GJM0336C1E8R9CB01D GJM1555C1H8R9CB01D 0.5pF(D) GJM0336C1E8R9DB01D GJM1555C1H8R9DB01D The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code qProduct ID wSeries tTemperature Characteristics u i o !0 iCapacitance Tolerance q w e r t y Packaging Code in Part Number is a code shows STD 180mm Reel Taping. (Part Number) GJ 92 M 03 3 6C 1E 7R8 W B01 D eDimension (LxW) yRated Voltage oIndividual Specification Code rDimension (T) uCapacitance !0Packaging PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Temperature Compensating Type C0G(5C)/C0H(6C) Characteristics LxW [mm] Rated Volt. [Vdc] Capacitance 9.0pF(9R0) 9.1pF(9R1) 9.2pF(9R2) 9.3pF(9R3) 9.4pF(9R4) 9.5pF(9R5) 9.6pF(9R6) 9.7pF(9R7) 9.8pF(9R8) 9.9pF(9R9) 0.6x0.3(03)<0201> 1.0x0.5(15)<0402> 25(1E) 50(1H) Tolerance Part Number 0.05pF(W) GJM0336C1E9R0WB01D GJM1555C1H9R0WB01D 0.1pF(B) GJM0336C1E9R0BB01D GJM1555C1H9R0BB01D 0.25pF(C) GJM0336C1E9R0CB01D GJM1555C1H9R0CB01D 0.5pF(D) GJM0336C1E9R0DB01D GJM1555C1H9R0DB01D 0.05pF(W) GJM0336C1E9R1WB01D GJM1555C1H9R1WB01D 0.1pF(B) GJM0336C1E9R1BB01D GJM1555C1H9R1BB01D 0.25pF(C) GJM0336C1E9R1CB01D GJM1555C1H9R1CB01D 0.5pF(D) GJM0336C1E9R1DB01D GJM1555C1H9R1DB01D 0.05pF(W) GJM0336C1E9R2WB01D GJM1555C1H9R2WB01D 0.1pF(B) GJM0336C1E9R2BB01D GJM1555C1H9R2BB01D 0.25pF(C) GJM0336C1E9R2CB01D GJM1555C1H9R2CB01D 0.5pF(D) GJM0336C1E9R2DB01D GJM1555C1H9R2DB01D 0.05pF(W) GJM0336C1E9R3WB01D GJM1555C1H9R3WB01D 0.1pF(B) GJM0336C1E9R3BB01D GJM1555C1H9R3BB01D 0.25pF(C) GJM0336C1E9R3CB01D GJM1555C1H9R3CB01D 0.5pF(D) GJM0336C1E9R3DB01D GJM1555C1H9R3DB01D 0.05pF(W) GJM0336C1E9R4WB01D GJM1555C1H9R4WB01D 0.1pF(B) GJM0336C1E9R4BB01D GJM1555C1H9R4BB01D 0.25pF(C) GJM0336C1E9R4CB01D GJM1555C1H9R4CB01D 0.5pF(D) GJM0336C1E9R4DB01D GJM1555C1H9R4DB01D 0.05pF(W) GJM0336C1E9R5WB01D GJM1555C1H9R5WB01D 0.1pF(B) GJM0336C1E9R5BB01D GJM1555C1H9R5BB01D 0.25pF(C) GJM0336C1E9R5CB01D GJM1555C1H9R5CB01D 0.5pF(D) GJM0336C1E9R5DB01D GJM1555C1H9R5DB01D 0.05pF(W) GJM0336C1E9R6WB01D GJM1555C1H9R6WB01D 0.1pF(B) GJM0336C1E9R6BB01D GJM1555C1H9R6BB01D 0.25pF(C) GJM0336C1E9R6CB01D GJM1555C1H9R6CB01D 0.5pF(D) GJM0336C1E9R6DB01D GJM1555C1H9R6DB01D 0.05pF(W) GJM0336C1E9R7WB01D GJM1555C1H9R7WB01D 0.1pF(B) GJM0336C1E9R7BB01D GJM1555C1H9R7BB01D 0.25pF(C) GJM0336C1E9R7CB01D GJM1555C1H9R7CB01D 0.5pF(D) GJM0336C1E9R7DB01D GJM1555C1H9R7DB01D 0.05pF(W) GJM0336C1E9R8WB01D GJM1555C1H9R8WB01D 0.1pF(B) GJM0336C1E9R8BB01D GJM1555C1H9R8BB01D 0.25pF(C) GJM0336C1E9R8CB01D GJM1555C1H9R8CB01D 0.5pF(D) GJM0336C1E9R8DB01D GJM1555C1H9R8DB01D 0.05pF(W) GJM0336C1E9R9WB01D GJM1555C1H9R9WB01D 0.1pF(B) GJM0336C1E9R9BB01D GJM1555C1H9R9BB01D 0.25pF(C) GJM0336C1E9R9CB01D GJM1555C1H9R9CB01D 0.5pF(D) GJM0336C1E9R9DB01D GJM1555C1H9R9DB01D The part number code is shown in ( ) and Unit is shown in [ ]. 4 < >: EIA [inch] Code 93 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Temperature Compensating Type C0G(5C)/C0H(6C) Characteristics 0.6x0.3(03)<0201> LxW [mm] 25(1E) Rated Volt. [Vdc] Capacitance Tolerance 50(1H) Part Number 2%(G) GJM0336C1E100GB01D 5%(J) GJM0336C1E100JB01D GJM1555C1H100JB01D 11pF(110) 2%(G) GJM0336C1E110GB01D GJM1555C1H110GB01D 5%(J) GJM0336C1E110JB01D GJM1555C1H110JB01D 12pF(120) 2%(G) GJM0336C1E120GB01D GJM1555C1H120GB01D 5%(J) GJM0336C1E120JB01D GJM1555C1H120JB01D 13pF(130) 2%(G) GJM0336C1E130GB01D GJM1555C1H130GB01D 5%(J) GJM0336C1E130JB01D GJM1555C1H130JB01D 15pF(150) 2%(G) GJM0336C1E150GB01D GJM1555C1H150GB01D 5%(J) GJM0336C1E150JB01D GJM1555C1H150JB01D 2%(G) GJM0336C1E160GB01D GJM1555C1H160GB01D 5%(J) GJM0336C1E160JB01D GJM1555C1H160JB01D 18pF(180) 2%(G) GJM0336C1E180GB01D GJM1555C1H180GB01D 5%(J) GJM0336C1E180JB01D GJM1555C1H180JB01D 20pF(200) 2%(G) GJM0336C1E200GB01D GJM1555C1H200GB01D 5%(J) GJM0336C1E200JB01D GJM1555C1H200JB01D 10pF(100) 4 1.0x0.5(15)<0402> 6.3(0J) 16pF(160) 22pF(220) 2%(G) GJM1555C1H100GB01D GJM0335C0J220GB01D 5%(J) GJM0335C0J220JB01D 24pF(240) 2%(G) GJM0335C0J240GB01D 5%(J) GJM0335C0J240JB01D 27pF(270) 2%(G) GJM0335C0J270GB01D 5%(J) GJM0335C0J270JB01D 30pF(300) 2%(G) GJM0335C0J300GB01D 5%(J) GJM0335C0J300JB01D 33pF(330) 2%(G) GJM0335C0J330GB01D 5%(J) GJM0335C0J330JB01D The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code qProduct ID wSeries tTemperature Characteristics u i o !0 iCapacitance Tolerance q w e r t y Packaging Code in Part Number is a code shows STD 180mm Reel Taping. (Part Number) GJ 94 M 03 3 6C 1E 100 G B01 D eDimension (LxW) yRated Voltage oIndividual Specification Code rDimension (T) uCapacitance !0Packaging PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. GJM Series Specifications and Test Methods (1) Specifications and Test Methods GJM Series Specifications No. Item Test Method Temperature Compensating Type 1 Operating Temperature Range Y55 to W125D Reference Temperature: 25D (2C, 3C, 4C: 20D) 2 Rated Voltage See the previous pages. The rated voltage is defined as the maximum voltage which may be applied continuously to the capacitor. When AC voltage is superimposed on DC voltage, VP-P or VO-P, whichever is larger, should be maintained within the rated voltage range. 3 Appearance No defects or abnormalities Visual inspection 4 Dimensions Within the specified dimensions Using calipers 5 Dielectric Strength No defects or abnormalities No failure should be observed when 300% of the rated voltage is applied between the terminations for 1 to 5 seconds, provided the charge/discharge current is less than 50mA. 6 Insulation Resistance 10,000M min. or 500 * F min. (Whichever is smaller) (I.R.) 7 Capacitance Within the specified tolerance 8 Q 30pF and over: QU1000 30pF and below: QU400W20C C: Nominal Capacitance (pF) Temperature Coefficient 9 Capacitance Temperature Characteristics Capacitance Drift Within the specified tolerance (Table A) Within T0.2% or T0.05pF (Whichever is larger.) 4 The insulation resistance should be measured with a DC voltage not exceeding the rated voltage at 25D and 75%RH max. and within 2 minutes of charging. The capacitance/Q should be measured at 25D at the frequency and voltage shown in the table. 1T0.1MHz Frequency 0.5 to 5Vrms Voltage The capacitance change should be measured after 5 min. at each specified temperature stage. Temperature Compensating Type The temperature coefficient is determined using the capacitance measured in step 3 as a reference. When cycling the temperature sequentially from step 1 through 5, (5C: W25 to 125D: other temp. coeffs.: W20 to 125D) the capacitance should be within the specified tolerance for the temperature coefficient and capacitance change as Table A. The capacitance drift is calculated by dividing the differences between the maximum and minimum measured values in steps 1, 3 and 5 by the capacitance value in step 3. Step 1 Temperature (D) Reference Temp. T2 2 Y55T3 3 Reference Temp. T2 4 125T3 5 Reference Temp. T2 Solder the capacitor to the test jig (glass epoxy board) shown in Fig. 1 using a eutectic solder. Then apply a 5N* force in parallel with the test jig for 10T1 sec. The soldering should be done either with an iron or using the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock. *2N (GJM03) Adhesive Strength of Termination No removal of the terminations or other defect should occur. a 10 b c Solder resist Baked electrode or copper foil Type GJM03 GJM15 a 0.3 0.4 b 0.9 1.5 c 0.3 0.5 (in mm) Fig. 1 Continued on the following page. 95 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. GJM Series Specifications and Test Methods (1) Continued from the preceding page. Specifications No. Item Test Method Temperature Compensating Type 4 No defects or abnormalities Capacitance Within the specified tolerance Q 30pF and over: QU1000 30pF and below: QU400W20C C: Nominal Capacitance (pF) Appearance No marking defects Capacitance Change Within T5% or T0.5pF (Whichever is larger) Vibration Resistance 12 4.5 VWZ[(c)XT_\|U(R)]YZSTW,QRV^[ Y]^(R)Z b Solder the capacitor to the test jig (glass epoxy board) in the same manner and under the same conditions as (10). The capacitor should be subjected to a simple harmonic motion having a total amplitude of 1.5mm, the frequency being varied uniformly between the approximate limits of 10 and 55Hz. The frequency range, from 10 to 55Hz and return to 10Hz, should be traversed in approximately 1 minute. This motion should be applied for a period of 2 hours in each of 3 mutually perpendicular directions (total of 6 hours). c Deflection Solder the capacitor to the test jig (glass epoxy boards) shown in Fig. 2 using a eutectic solder. Then apply a force in the direction shown in Fig. 3. The soldering should be done by the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock. 20 40 11 Appearance R230 a t: 0.8mm 100 Type GJM03 GJM15 a 0.3 0.4 50 Pressurizing speed : 1.0mm/sec. Pressurize b 0.9 1.5 c 0.3 0.5 Flexure : V1 Capacitance meter 45 45 (in mm) (in mm) Fig. 2 Fig. 3 13 Solderability of Termination 75% of the terminations are to be soldered evenly and continuously. Immerse the capacitor in a solution of ethanol (JIS-K-8101) and rosin (JIS-K-5902) (25% rosin in weight proportion). Preheat at 80 to 120D for 10 to 30 seconds. After preheating, immerse in eutectic solder solution for 2T0.5 seconds at 230T5D or Sn-3.0Ag-0.5Cu solder solution for 20.5 seconds at 2455C. The measured and observed characteristics should satisfy the specifications in the following table. Resistance 14 to Soldering Heat Appearance No marking defects Capacitance Change Within T2.5% or T0.25pF (Whichever is larger) Q 30pF and over: QU1000 30pF and below: QU400W20C C: Nominal Capacitance (pF) I.R. More than 10,000M or 500 * F (Whichever is smaller) Dielectric Strength No failure Preheat the capacitor at 120 to 150D for 1 minute. Immerse the capacitor in a eutectic solder or Sn-3.0Ag-0.5Cu solder solution at 270T5D for 10T0.5 seconds. Let sit at room temperature for 24T2 hours. The measured and observed characteristics should satisfy the specifications in the following table. 15 Fix the capacitor to the supporting jig in the same manner and under the same conditions as (10). Perform the five cycles according to the four heat treatments listed in the following table. Let sit for 24T2 hours at room temperature, then measure. Appearance No marking defects Capacitance Change Within T2.5% or T0.25pF (Whichever is larger) Q 30pF and over: QU1000 30pF and below: QU400W20C C: Nominal Capacitance (pF) Temp. (D) I.R. More than 10,000M or 500 * F (Whichever is smaller) Time (min.) Dielectric Strength No failure Temperature Cycle Step 1 2 3 4 Min. Operating Room Max. Operating Room W0 W3 Temp. Y3 Temp. Y0 Temp. Temp. 30T3 2 to 3 30T3 2 to 3 The measured and observed characteristics should satisfy the specifications in the following table. 16 Humidity, Steady State Appearance No marking defects Capacitance Change Within T5% or T0.5pF (Whichever is larger) Q 30pF and below: QU350 10pF and over, 30pF and below: QU275W 5 2 C 10pF and below: QU200W10C C: Nominal Capacitance (pF) I.R. More than 10,000M or 500 * F (Whichever is smaller) Let the capacitor sit at 40T2D and 90 to 95% humidity for 500T12 hours. Remove and let sit for 24T2 hours (temperature compensating type) at room temperature, then measure. Continued on the following page. 96 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. GJM Series Specifications and Test Methods (1) Specifications and Test Methods GJM Series Continued from the preceding page. Specifications No. Item Test Method Temperature Compensating Type The measured and observed characteristics should satisfy the specifications in the following table. 17 Humidity Load Appearance No marking defects Capacitance Change Within T7.5% or T0.75pF (Whichever is larger) Q 30pF and over: QU200 30pF and below: QU100W 10 3 C C: Nominal Capacitance (pF) I.R. More than 500M or 25 * F (Whichever is smaller) Apply the rated voltage at 40T2D and 90 to 95% humidity for 500T12 hours. Remove and let sit for 24T2 hours at room temperature, then measure. The charge/discharge current is less than 50mA. 4 The measured and observed characteristics should satisfy the specifications in the following table. 18 19 High Temperature Load ESR Appearance No marking defects Capacitance Change Within T3% or T0.3pF (Whichever is larger) Q 30pF and over: QU350 10pF and over, 30pF and below: QU275W 5 2 C 10pF and below: QU200W10C C: Nominal Capacitance (pF) I.R. More than 1,000M or 50 * F (Whichever is smaller) Apply 200% of the rated voltage for 1000T12 hours at the maximum operating temperature T3D. Let sit for 24T2 hours (temperature compensating type) at room temperature, then measure. The charge/discharge current is less than 50mA. 0.1pFVCV1pF: 350m * pF below 1pFFCV5pF: 300m below 5pFFCV10pF: 250m below The ESR should be measured at room temperature, and frequency 1T0.2GHz with the equivalent of BOONTON Model 34A. 10pFFCV33pF: 400m below The ESR should be measured at room temperature, and frequency 500T50MHz with the equivalent of HP8753B. Table A (1) Capacitance Change from 25D Value (%) Char. Code Temp. Coeff. (ppm/D) *1 Y30D Y55D Max. Min. Y0.24 0T30 0.58 5C Y0.48 0T60 0.87 6C *1: Nominal values denote the temperature coefficient within a range of 25 to 125D. Max. 0.40 0.60 Y10D Min. Y0.17 Y0.33 Max. 0.25 0.38 Min. Y0.11 Y0.21 (2) Capacitance Change from 20D Value (%) Char. Nominal Values (ppm/D) *2 Y25D Y55D Max. Min. Y0.45 0T60 0.82 2C Y0.90 0T120 1.37 3C Y1.88 0T250 2.56 4C *2: Nominal values denote the temperature coefficient within a range of 20 to 125D. Max. 0.49 0.82 1.54 Y10D Min. Y0.27 Y0.54 Y1.13 Max. 0.33 0.55 1.02 Min. Y0.18 Y0.36 Y0.75 97 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Chip Monolithic Ceramic Capacitors High Frequency GQM Series e g e Features 5 T 1. HiQ and low ESR at VHF, UHF, Microwave 2. Feature improvement, low power consumption for mobile telecommunication. (Base station, terminal, etc.) L Applications Part Number High frequency circuit (Mobile telecommunication, etc.) GQM187 GQM188 GQM219 (50,100V) GQM219 (250V) L 1.6 0.15 1.6 0.1 2.0 0.1 2.0 0.15 W Dimensions (mm) W T e g min. 0.8 0.15 0.7 0.1 0.2 to 0.5 0.5 0.8 0.1 0.8 0.1 0.2 to 0.5 0.5 1.25 0.1 0.85 0.1 0.2 to 0.7 0.7 1.25 0.15 0.85 0.15 0.2 to 0.7 0.7 Capacitance Table Temperature Compensating Type C0G(5C) Characteristics 7 ex.7: T Dimension [mm] C0G(5C) TC 1.6x0.8 (18) <0603> LxW [mm] Rated Voltage [Vdc] 250 (2E) 0.10pF(R10) 0.20pF(R20) 50 (1H) 250 (2E) LxW [mm] 250 (2E) 50 (1H) 250 (2E) 100 (2A) 7 7.5pF(7R5) 7 8.0pF(8R0) 7 8 9 9 7 8 9 0.30pF(R30) 7 9 8.2pF(8R2) 7 8 9 9 0.40pF(R40) 7 9.0pF(9R0) 7 8 9 9 0.50pF(R50) 7 8 9 0.75pF(R75) 7 8 9 9 9.1pF(9R1) 7 8 9 9 9 10pF(100) 7 8 9 1.0pF(1R0) 7 8 9 9 9 11pF(110) 7 8 9 1.1pF(1R1) 7 9 8 9 9 12pF(120) 7 8 9 9 1.2pF(1R2) 7 8 9 9 13pF(130) 7 8 9 9 1.3pF(1R3) 7 8 9 9 15pF(150) 7 8 9 9 1.5pF(1R5) 7 8 9 9 16pF(160) 7 8 9 9 1.6pF(1R6) 7 8 9 9 18pF(180) 7 8 9 9 1.8pF(1R8) 7 8 9 9 20pF(200) 7 8 9 9 2.0pF(2R0) 7 8 9 9 22pF(220) 7 8 9 9 2.2pF(2R2) 7 8 9 9 24pF(240) 7 8 9 9 2.4pF(2R4) 7 8 9 9 27pF(270) 7 8 9 9 2.7pF(2R7) 7 8 9 9 30pF(300) 7 8 9 9 3.0pF(3R0) 7 8 9 9 33pF(330) 7 8 9 9 3.3pF(3R3) 7 8 9 9 36pF(360) 7 8 9 9 3.6pF(3R6) 7 8 9 9 39pF(390) 7 8 9 9 3.9pF(3R9) 7 8 9 9 43pF(430) 7 8 9 9 4.0pF(4R0) 7 8 9 9 47pF(470) 7 8 9 9 4.3pF(4R3) 7 8 9 9 51pF(510) 8 9 9 4.7pF(4R7) 7 8 9 9 56pF(560) 8 9 9 9 62pF(620) 8 9 9 Capacitance 100 (2A) 2.0x1.25 (21) <0805> 50 (1H) 50 (1H) 5.0pF(5R0) 7 8 9 5.1pF(5R1) 7 8 9 9 68pF(680) 8 9 9 5.6pF(5R6) 7 8 9 9 75pF(750) 8 9 9 6.0pF(6R0) 7 8 9 9 82pF(820) 8 9 9 6.2pF(6R2) 7 8 9 9 91pF(910) 8 9 9 6.8pF(6R8) 7 8 9 9 100pF(101) 8 9 9 7.0pF(7R0) 7 8 9 The part number code is shown in ( ) and Unit is shown in [ ]. 98 100 (2A) 1.6x0.8 (18) <0603> Rated Voltage [Vdc] Capacitance 100 (2A) C0G(5C) TC 2.0x1.25 (21) <0805> 9 < >: EIA [inch] Code PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Temperature Compensating Type C0G(5C) Characteristics 1.6x0.8(18)<0603> LxW [mm] 250(2E) Rated Volt. [Vdc] Capacitance Tolerance 100(2A) Part Number 0.10pF(R10) 0.1pF(B) GQM1875C2ER10BB12D 0.20pF(R20) 0.1pF(B) GQM1875C2ER20BB12D 0.30pF(R30) 0.1pF(B) GQM1875C2ER30BB12D 0.25pF(C) GQM1875C2ER30CB12D 0.1pF(B) GQM1875C2ER40BB12D 0.25pF(C) GQM1875C2ER40CB12D 0.1pF(B) GQM1875C2ER50BB12D GQM1885C2AR50BB01D 0.25pF(C) GQM1875C2ER50CB12D GQM1885C2AR50CB01D 0.40pF(R40) 0.50pF(R50) 0.75pF(R75) 1.0pF(1R0) 1.1pF(1R1) 1.2pF(1R2) 1.3pF(1R3) 1.5pF(1R5) 1.6pF(1R6) 1.8pF(1R8) 2.0pF(2R0) 2.2pF(2R2) 2.4pF(2R4) 2.7pF(2R7) 3.0pF(3R0) 3.3pF(3R3) 3.6pF(3R6) 3.9pF(3R9) 4.0pF(4R0) 4.3pF(4R3) 4.7pF(4R7) 5.0pF(5R0) 0.1pF(B) GQM1875C2ER75BB12D GQM1885C2AR75BB01D 0.25pF(C) GQM1875C2ER75CB12D GQM1885C2AR75CB01D 0.1pF(B) GQM1875C2E1R0BB12D GQM1885C2A1R0BB01D 0.25pF(C) GQM1875C2E1R0CB12D GQM1885C2A1R0CB01D 0.1pF(B) GQM1875C2E1R1BB12D GQM1885C2A1R1BB01D 0.25pF(C) GQM1875C2E1R1CB12D GQM1885C2A1R1CB01D 0.1pF(B) GQM1875C2E1R2BB12D GQM1885C2A1R2BB01D 0.25pF(C) GQM1875C2E1R2CB12D GQM1885C2A1R2CB01D 0.1pF(B) GQM1875C2E1R3BB12D GQM1885C2A1R3BB01D 0.25pF(C) GQM1875C2E1R3CB12D GQM1885C2A1R3CB01D 0.1pF(B) GQM1875C2E1R5BB12D GQM1885C2A1R5BB01D 0.25pF(C) GQM1875C2E1R5CB12D GQM1885C2A1R5CB01D 0.1pF(B) GQM1875C2E1R6BB12D GQM1885C2A1R6BB01D 0.25pF(C) GQM1875C2E1R6CB12D GQM1885C2A1R6CB01D 0.1pF(B) GQM1875C2E1R8BB12D GQM1885C2A1R8BB01D 0.25pF(C) GQM1875C2E1R8CB12D GQM1885C2A1R8CB01D 0.1pF(B) GQM1875C2E2R0BB12D GQM1885C2A2R0BB01D 0.25pF(C) GQM1875C2E2R0CB12D GQM1885C2A2R0CB01D 0.1pF(B) GQM1875C2E2R2BB12D GQM1885C2A2R2BB01D 0.25pF(C) GQM1875C2E2R2CB12D GQM1885C2A2R2CB01D 0.1pF(B) GQM1875C2E2R4BB12D GQM1885C2A2R4BB01D 0.25pF(C) GQM1875C2E2R4CB12D GQM1885C2A2R4CB01D 0.1pF(B) GQM1875C2E2R7BB12D GQM1885C2A2R7BB01D 0.25pF(C) GQM1875C2E2R7CB12D GQM1885C2A2R7CB01D 0.1pF(B) GQM1875C2E3R0BB12D GQM1885C2A3R0BB01D 0.25pF(C) GQM1875C2E3R0CB12D GQM1885C2A3R0CB01D 0.1pF(B) GQM1875C2E3R3BB12D GQM1885C2A3R3BB01D 0.25pF(C) GQM1875C2E3R3CB12D GQM1885C2A3R3CB01D 0.1pF(B) GQM1875C2E3R6BB12D GQM1885C2A3R6BB01D 0.25pF(C) GQM1875C2E3R6CB12D GQM1885C2A3R6CB01D 0.1pF(B) GQM1875C2E3R9BB12D GQM1885C2A3R9BB01D 0.25pF(C) GQM1875C2E3R9CB12D GQM1885C2A3R9CB01D 0.1pF(B) GQM1875C2E4R0BB12D GQM1885C2A4R0BB01D 0.25pF(C) GQM1875C2E4R0CB12D GQM1885C2A4R0CB01D 0.1pF(B) GQM1875C2E4R3BB12D GQM1885C2A4R3BB01D 0.25pF(C) GQM1875C2E4R3CB12D GQM1885C2A4R3CB01D 0.1pF(B) GQM1875C2E4R7BB12D GQM1885C2A4R7BB01D 0.25pF(C) GQM1875C2E4R7CB12D GQM1885C2A4R7CB01D 0.1pF(B) GQM1875C2E5R0BB12D GQM1885C2A5R0BB01D 0.25pF(C) GQM1875C2E5R0CB12D GQM1885C2A5R0CB01D The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code qProduct ID wSeries tTemperature Characteristics u i o !0 iCapacitance Tolerance q w e r t y Packaging Code in Part Number is a code shows STD 180mm Reel Taping. (Part Number) GQ M 18 7 5C 2E R10 B 5 B12 D eDimension (LxW) yRated Voltage oIndividual Specification Code rDimension (T) uCapacitance !0Packaging 99 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Temperature Compensating Type C0G(5C) Characteristics 1.6x0.8(18)<0603> LxW [mm] 250(2E) Rated Volt. [Vdc] Capacitance 50(1H) Part Number 0.25pF(C) GQM1875C2E5R1CB12D GQM1885C2A5R1CB01D 0.5pF(D) GQM1875C2E5R1DB12D GQM1885C2A5R1DB01D 0.25pF(C) GQM1875C2E5R6CB12D GQM1885C2A5R6CB01D 0.5pF(D) GQM1875C2E5R6DB12D GQM1885C2A5R6DB01D 6.0pF(6R0) 0.25pF(C) GQM1875C2E6R0CB12D GQM1885C2A6R0CB01D 0.5pF(D) GQM1875C2E6R0DB12D GQM1885C2A6R0DB01D 6.2pF(6R2) 0.25pF(C) GQM1875C2E6R2CB12D GQM1885C2A6R2CB01D 0.5pF(D) GQM1875C2E6R2DB12D GQM1885C2A6R2DB01D 0.25pF(C) GQM1875C2E6R8CB12D GQM1885C2A6R8CB01D 0.5pF(D) GQM1875C2E6R8DB12D GQM1885C2A6R8DB01D 0.25pF(C) GQM1875C2E7R0CB12D GQM1885C1H7R0CB01D 0.5pF(D) GQM1875C2E7R0DB12D GQM1885C1H7R0DB01D 0.25pF(C) GQM1875C2E7R5CB12D GQM1885C1H7R5CB01D 0.5pF(D) GQM1875C2E7R5DB12D GQM1885C1H7R5DB01D 0.25pF(C) GQM1875C2E8R0CB12D GQM1885C1H8R0CB01D 0.5pF(D) GQM1875C2E8R0DB12D GQM1885C1H8R0DB01D 0.25pF(C) GQM1875C2E8R2CB12D GQM1885C1H8R2CB01D 0.5pF(D) GQM1875C2E8R2DB12D GQM1885C1H8R2DB01D 0.25pF(C) GQM1875C2E9R0CB12D GQM1885C1H9R0CB01D 0.5pF(D) GQM1875C2E9R0DB12D GQM1885C1H9R0DB01D 0.25pF(C) GQM1875C2E9R1CB12D GQM1885C1H9R1CB01D 0.5pF(D) GQM1875C2E9R1DB12D GQM1885C1H9R1DB01D 2%(G) GQM1875C2E100GB12D GQM1885C1H100GB01D 5%(J) GQM1875C2E100JB12D GQM1885C1H100JB01D 2%(G) GQM1875C2E110GB12D GQM1885C1H110GB01D 5%(J) GQM1875C2E110JB12D GQM1885C1H110JB01D 2%(G) GQM1875C2E120GB12D GQM1885C1H120GB01D 5%(J) GQM1875C2E120JB12D GQM1885C1H120JB01D 13pF(130) 2%(G) GQM1875C2E130GB12D GQM1885C1H130GB01D 5%(J) GQM1875C2E130JB12D GQM1885C1H130JB01D 15pF(150) 2%(G) GQM1875C2E150GB12D GQM1885C1H150GB01D 5%(J) GQM1875C2E150JB12D GQM1885C1H150JB01D 2%(G) GQM1875C2E160GB12D GQM1885C1H160GB01D 5%(J) GQM1875C2E160JB12D GQM1885C1H160JB01D 18pF(180) 2%(G) GQM1875C2E180GB12D GQM1885C1H180GB01D 5%(J) GQM1875C2E180JB12D GQM1885C1H180JB01D 20pF(200) 2%(G) GQM1875C2E200GB12D GQM1885C1H200GB01D 5%(J) GQM1875C2E200JB12D GQM1885C1H200JB01D 22pF(220) 2%(G) GQM1875C2E220GB12D GQM1885C1H220GB01D 5%(J) GQM1875C2E220JB12D GQM1885C1H220JB01D 24pF(240) 2%(G) GQM1875C2E240GB12D GQM1885C1H240GB01D 5%(J) GQM1875C2E240JB12D GQM1885C1H240JB01D 2%(G) GQM1875C2E270GB12D GQM1885C1H270GB01D 5%(J) GQM1875C2E270JB12D GQM1885C1H270JB01D 2%(G) GQM1875C2E300GB12D GQM1885C1H300GB01D 5%(J) GQM1875C2E300JB12D GQM1885C1H300JB01D 5.1pF(5R1) 5.6pF(5R6) 5 100(2A) Tolerance 6.8pF(6R8) 7.0pF(7R0) 7.5pF(7R5) 8.0pF(8R0) 8.2pF(8R2) 9.0pF(9R0) 9.1pF(9R1) 10pF(100) 11pF(110) 12pF(120) 16pF(160) 27pF(270) 30pF(300) The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code qProduct ID wSeries tTemperature Characteristics u i o !0 iCapacitance Tolerance q w e r t y Packaging Code in Part Number is a code shows STD 180mm Reel Taping. (Part Number) GQ M 100 18 7 5C 2E 5R1 C B12 D eDimension (LxW) yRated Voltage oIndividual Specification Code rDimension (T) uCapacitance !0Packaging PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Temperature Compensating Type C0G(5C) Characteristics 1.6x0.8(18)<0603> LxW [mm] 250(2E) Rated Volt. [Vdc] Capacitance Tolerance 50(1H) Part Number 2%(G) GQM1875C2E330GB12D 5%(J) GQM1875C2E330JB12D GQM1885C1H330JB01D 36pF(360) 2%(G) GQM1875C2E360GB12D GQM1885C1H360GB01D 5%(J) GQM1875C2E360JB12D GQM1885C1H360JB01D 39pF(390) 2%(G) GQM1875C2E390GB12D GQM1885C1H390GB01D 5%(J) GQM1875C2E390JB12D GQM1885C1H390JB01D 43pF(430) 2%(G) GQM1875C2E430GB12D GQM1885C1H430GB01D 5%(J) GQM1875C2E430JB12D GQM1885C1H430JB01D 2%(G) GQM1875C2E470GB12D GQM1885C1H470GB01D 5%(J) GQM1875C2E470JB12D GQM1885C1H470JB01D 33pF(330) 47pF(470) 51pF(510) 2%(G) GQM1885C1H330GB01D GQM1885C1H510GB01D 5%(J) GQM1885C1H510JB01D 56pF(560) 2%(G) GQM1885C1H560GB01D 5%(J) GQM1885C1H560JB01D 62pF(620) 2%(G) GQM1885C1H620GB01D 5%(J) GQM1885C1H620JB01D 2%(G) GQM1885C1H680GB01D 68pF(680) 5%(J) GQM1885C1H680JB01D 75pF(750) 2%(G) GQM1885C1H750GB01D 5%(J) GQM1885C1H750JB01D 82pF(820) 2%(G) GQM1885C1H820GB01D 5%(J) GQM1885C1H820JB01D 91pF(910) 2%(G) GQM1885C1H910GB01D 5%(J) GQM1885C1H910JB01D 100pF(101) 2%(G) GQM1885C1H101GB01D 5%(J) GQM1885C1H101JB01D The part number code is shown in ( ) and Unit is shown in [ ]. 5 < >: EIA [inch] Code 101 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Temperature Compensating Type C0G(5C) Characteristics 2.0x1.25(21)<0805> LxW [mm] 250(2E) Rated Volt. [Vdc] Capacitance 0.50pF(R50) 0.75pF(R75) 1.0pF(1R0) 1.1pF(1R1) 5 1.2pF(1R2) 1.3pF(1R3) 1.5pF(1R5) 1.6pF(1R6) 1.8pF(1R8) 2.0pF(2R0) 2.2pF(2R2) 2.4pF(2R4) 2.7pF(2R7) 3.0pF(3R0) 3.3pF(3R3) 3.6pF(3R6) 3.9pF(3R9) 4.0pF(4R0) 4.3pF(4R3) 4.7pF(4R7) 5.0pF(5R0) 5.1pF(5R1) 5.6pF(5R6) 6.0pF(6R0) Tolerance 100(2A) Part Number 0.1pF(B) GQM2195C2ER50BB12D GQM2195C2AR50BB01D 0.25pF(C) GQM2195C2ER50CB12D GQM2195C2AR50CB01D 0.1pF(B) GQM2195C2ER75BB12D GQM2195C2AR75BB01D 0.25pF(C) GQM2195C2ER75CB12D GQM2195C2AR75CB01D 0.1pF(B) GQM2195C2E1R0BB12D GQM2195C2A1R0BB01D 0.25pF(C) GQM2195C2E1R0CB12D GQM2195C2A1R0CB01D 0.1pF(B) GQM2195C2E1R1BB12D GQM2195C2A1R1BB01D 0.25pF(C) GQM2195C2E1R1CB12D GQM2195C2A1R1CB01D 0.1pF(B) GQM2195C2E1R2BB12D GQM2195C2A1R2BB01D 0.25pF(C) GQM2195C2E1R2CB12D GQM2195C2A1R2CB01D 0.1pF(B) GQM2195C2E1R3BB12D GQM2195C2A1R3BB01D 0.25pF(C) GQM2195C2E1R3CB12D GQM2195C2A1R3CB01D 0.1pF(B) GQM2195C2E1R5BB12D GQM2195C2A1R5BB01D 0.25pF(C) GQM2195C2E1R5CB12D GQM2195C2A1R5CB01D 0.1pF(B) GQM2195C2E1R6BB12D GQM2195C2A1R6BB01D 0.25pF(C) GQM2195C2E1R6CB12D GQM2195C2A1R6CB01D 0.1pF(B) GQM2195C2E1R8BB12D GQM2195C2A1R8BB01D 0.25pF(C) GQM2195C2E1R8CB12D GQM2195C2A1R8CB01D 0.1pF(B) GQM2195C2E2R0BB12D GQM2195C2A2R0BB01D 0.25pF(C) GQM2195C2E2R0CB12D GQM2195C2A2R0CB01D 0.1pF(B) GQM2195C2E2R2BB12D GQM2195C2A2R2BB01D 0.25pF(C) GQM2195C2E2R2CB12D GQM2195C2A2R2CB01D 0.1pF(B) GQM2195C2E2R4BB12D GQM2195C2A2R4BB01D 0.25pF(C) GQM2195C2E2R4CB12D GQM2195C2A2R4CB01D 0.1pF(B) GQM2195C2E2R7BB12D GQM2195C2A2R7BB01D 0.25pF(C) GQM2195C2E2R7CB12D GQM2195C2A2R7CB01D 0.1pF(B) GQM2195C2E3R0BB12D GQM2195C2A3R0BB01D 0.25pF(C) GQM2195C2E3R0CB12D GQM2195C2A3R0CB01D 0.1pF(B) GQM2195C2E3R3BB12D GQM2195C2A3R3BB01D 0.25pF(C) GQM2195C2E3R3CB12D GQM2195C2A3R3CB01D 0.1pF(B) GQM2195C2E3R6BB12D GQM2195C2A3R6BB01D 0.25pF(C) GQM2195C2E3R6CB12D GQM2195C2A3R6CB01D 0.1pF(B) GQM2195C2E3R9BB12D GQM2195C2A3R9BB01D 0.25pF(C) GQM2195C2E3R9CB12D GQM2195C2A3R9CB01D 0.1pF(B) GQM2195C2E4R0BB12D GQM2195C2A4R0BB01D 0.25pF(C) GQM2195C2E4R0CB12D GQM2195C2A4R0CB01D 0.1pF(B) GQM2195C2E4R3BB12D GQM2195C2A4R3BB01D 0.25pF(C) GQM2195C2E4R3CB12D GQM2195C2A4R3CB01D 0.1pF(B) GQM2195C2E4R7BB12D GQM2195C2A4R7BB01D 0.25pF(C) GQM2195C2E4R7CB12D GQM2195C2A4R7CB01D 0.1pF(B) GQM2195C2E5R0BB12D GQM2195C2A5R0BB01D 0.25pF(C) GQM2195C2E5R0CB12D GQM2195C2A5R0CB01D 0.25pF(C) GQM2195C2E5R1CB12D GQM2195C2A5R1CB01D 0.5pF(D) GQM2195C2E5R1DB12D GQM2195C2A5R1DB01D 0.25pF(C) GQM2195C2E5R6CB12D GQM2195C2A5R6CB01D 0.5pF(D) GQM2195C2E5R6DB12D GQM2195C2A5R6DB01D 0.25pF(C) GQM2195C2E6R0CB12D GQM2195C2A6R0CB01D 0.5pF(D) GQM2195C2E6R0DB12D GQM2195C2A6R0DB01D The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code qProduct ID wSeries tTemperature Characteristics u i o !0 iCapacitance Tolerance q w e r t y Packaging Code in Part Number is a code shows STD 180mm Reel Taping. (Part Number) GQ M 102 21 9 5C 2E R50 B B12 D eDimension (LxW) yRated Voltage oIndividual Specification Code rDimension (T) uCapacitance !0Packaging PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Temperature Compensating Type C0G(5C) Characteristics 2.0x1.25(21)<0805> LxW [mm] 250(2E) Rated Volt. [Vdc] Capacitance 100(2A) Tolerance 50(1H) Part Number 0.25pF(C) GQM2195C2E6R2CB12D GQM2195C2A6R2CB01D 0.5pF(D) GQM2195C2E6R2DB12D GQM2195C2A6R2DB01D 0.25pF(C) GQM2195C2E6R8CB12D GQM2195C2A6R8CB01D 0.5pF(D) GQM2195C2E6R8DB12D GQM2195C2A6R8DB01D 7.0pF(7R0) 0.25pF(C) GQM2195C2E7R0CB12D GQM2195C2A7R0CB01D 0.5pF(D) GQM2195C2E7R0DB12D GQM2195C2A7R0DB01D 7.5pF(7R5) 0.25pF(C) GQM2195C2E7R5CB12D GQM2195C2A7R5CB01D 0.5pF(D) GQM2195C2E7R5DB12D GQM2195C2A7R5DB01D 0.25pF(C) GQM2195C2E8R0CB12D GQM2195C2A8R0CB01D 0.5pF(D) GQM2195C2E8R0DB12D GQM2195C2A8R0DB01D 0.25pF(C) GQM2195C2E8R2CB12D GQM2195C2A8R2CB01D 0.5pF(D) GQM2195C2E8R2DB12D GQM2195C2A8R2DB01D 0.25pF(C) GQM2195C2E9R0CB12D GQM2195C2A9R0CB01D 0.5pF(D) GQM2195C2E9R0DB12D GQM2195C2A9R0DB01D 0.25pF(C) GQM2195C2E9R1CB12D GQM2195C2A9R1CB01D 0.5pF(D) GQM2195C2E9R1DB12D GQM2195C2A9R1DB01D 2%(G) GQM2195C2E100GB12D GQM2195C2A100GB01D 5%(J) GQM2195C2E100JB12D GQM2195C2A100JB01D 11pF(110) 2%(G) GQM2195C2E110GB12D GQM2195C2A110GB01D 5%(J) GQM2195C2E110JB12D GQM2195C2A110JB01D 12pF(120) 2%(G) GQM2195C2E120GB12D GQM2195C2A120GB01D 5%(J) GQM2195C2E120JB12D GQM2195C2A120JB01D 13pF(130) 2%(G) GQM2195C2E130GB12D GQM2195C2A130GB01D 5%(J) GQM2195C2E130JB12D GQM2195C2A130JB01D 15pF(150) 2%(G) GQM2195C2E150GB12D GQM2195C2A150GB01D 5%(J) GQM2195C2E150JB12D GQM2195C2A150JB01D 2%(G) GQM2195C2E160GB12D GQM2195C2A160GB01D 5%(J) GQM2195C2E160JB12D GQM2195C2A160JB01D 18pF(180) 2%(G) GQM2195C2E180GB12D GQM2195C2A180GB01D 5%(J) GQM2195C2E180JB12D GQM2195C2A180JB01D 20pF(200) 2%(G) GQM2195C2E200GB12D GQM2195C1H200JB01D GQM2195C1H220GB01D 6.2pF(6R2) 6.8pF(6R8) 8.0pF(8R0) 8.2pF(8R2) 9.0pF(9R0) 9.1pF(9R1) 10pF(100) 16pF(160) 5 GQM2195C1H200GB01D 5%(J) GQM2195C2E200JB12D 22pF(220) 2%(G) GQM2195C2E220GB12D 5%(J) GQM2195C2E220JB12D GQM2195C1H220JB01D 24pF(240) 2%(G) GQM2195C2E240GB12D GQM2195C1H240GB01D 5%(J) GQM2195C2E240JB12D GQM2195C1H240JB01D 27pF(270) 2%(G) GQM2195C2E270GB12D GQM2195C1H270GB01D 5%(J) GQM2195C2E270JB12D GQM2195C1H270JB01D 30pF(300) 2%(G) GQM2195C2E300GB12D GQM2195C1H300GB01D 5%(J) GQM2195C2E300JB12D GQM2195C1H300JB01D 33pF(330) 2%(G) GQM2195C2E330GB12D GQM2195C1H330GB01D 5%(J) GQM2195C2E330JB12D GQM2195C1H330JB01D 2%(G) GQM2195C2E360GB12D GQM2195C1H360GB01D 5%(J) GQM2195C2E360JB12D GQM2195C1H360JB01D 2%(G) GQM2195C2E390GB12D GQM2195C1H390GB01D 5%(J) GQM2195C2E390JB12D GQM2195C1H390JB01D 36pF(360) 39pF(390) The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code 103 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Temperature Compensating Type C0G(5C) Characteristics 2.0x1.25(21)<0805> LxW [mm] 250(2E) Rated Volt. [Vdc] Capacitance 50(1H) Part Number 2%(G) GQM2195C2E430GB12D 5%(J) GQM2195C2E430JB12D GQM2195C1H430JB01D 47pF(470) 2%(G) GQM2195C2E470GB12D GQM2195C1H470GB01D 5%(J) GQM2195C2E470JB12D GQM2195C1H470JB01D 51pF(510) 2%(G) GQM2195C2E510GB12D GQM2195C1H510GB01D 5%(J) GQM2195C2E510JB12D GQM2195C1H510JB01D 56pF(560) 2%(G) GQM2195C2E560GB12D GQM2195C1H560GB01D 5%(J) GQM2195C2E560JB12D GQM2195C1H560JB01D 62pF(620) 2%(G) GQM2195C2E620GB12D GQM2195C1H620GB01D 5%(J) GQM2195C2E620JB12D GQM2195C1H620JB01D 2%(G) GQM2195C2E680GB12D GQM2195C1H680GB01D 5%(J) GQM2195C2E680JB12D GQM2195C1H680JB01D 75pF(750) 2%(G) GQM2195C2E750GB12D GQM2195C1H750GB01D 5%(J) GQM2195C2E750JB12D GQM2195C1H750JB01D 82pF(820) 2%(G) GQM2195C2E820GB12D GQM2195C1H820GB01D 5%(J) GQM2195C2E820JB12D GQM2195C1H820JB01D 2%(G) GQM2195C2E910GB12D GQM2195C1H910GB01D 5%(J) GQM2195C2E910JB12D GQM2195C1H910JB01D 2%(G) GQM2195C2E101GB12D GQM2195C1H101GB01D 5%(J) GQM2195C2E101JB12D GQM2195C1H101JB01D 43pF(430) 5 Tolerance 68pF(680) 91pF(910) 100pF(101) The part number code is shown in ( ) and Unit is shown in [ ]. GQM2195C1H430GB01D < >: EIA [inch] Code qProduct ID wSeries tTemperature Characteristics u i o !0 iCapacitance Tolerance q w e r t y Packaging Code in Part Number is a code shows STD 180mm Reel Taping. (Part Number) GQ M 104 21 9 5C 2E 430 G B12 D eDimension (LxW) yRated Voltage oIndividual Specification Code rDimension (T) uCapacitance !0Packaging PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. GQM Series Specifications and TestGQM Methods (1)Specifications and Test Methods Series 1 Specifications Item No. Operating Temperature Test Method Y55 to 125D Reference Temperature: 25D The rated voltage is defined as the maximum voltage which may be applied continuously to the capacitor. When AC voltage is superimposed on DC voltage, VP-P or VO-P, whichever is larger, should be maintained within the rated voltage range. 2 Rated Voltage See the previous page. 3 Appearance No defects or abnormalities Visual inspection 4 Dimension Within the specified dimensions Using calipers No defects or abnormalities No failure should be observed when 300% of the rated voltage is applied between the terminations for 1 to 5 seconds, provided the charge/discharge current is less than 50mA. 250V only 250% 5 Dielectric Strength 6 Insulation Resistance More than 10,000M 7 Capacitance 8 Q The insulation resistance should be measured with a DC voltage not exceeding the rated voltage at 25D and 75%RH max. and within 2 minutes of charging. Within the specified tolerance The capacitance/Q should be measured at 25D at the frequency and voltage shown in the table. 30pF min.: QU1400 30pF max.: QU800W20C Capacitance Change Within the specified tolerance (Table A) Temperature Coefficient Within the specified tolerance (Table A) Capacitance Drift Within T0.2% or T0.05pF (Whichever is larger) The temperature coefficient is determined using the capacitance measured in step 3 as a reference. When cycling the temperature sequentially from step 1 through 5 the capacitance should be within the specified tolerance for the temperature coefficient and capacitance change as in Table A. The capacitance drift is calculated by dividing the differences between the maximum and minimum measured values in the steps 1, 3 and 5 by the capacitance value in step 3. Capacitance Temperature Characteristics Step 1 No removal of the terminations or other defect should occur. c a Adhesive Strength of Termination b 10 Solder resist Baked electrode or copper foil 11 Appearance No defects or abnormalities Capacitance Within the specified tolerance Vibration Resistance Q 30pF min.: QU1400 30pF max.: QU800W20C C: Nominal Capacitance (pF) 0.5 to 5Vrms Voltage C: Nominal Capacitance (pF) 9 1T0.1MHz Frequency Temperature (D) Reference Temp. T2 2 Y55T3 3 Reference Temp. T2 4 125T3 5 Reference Temp. T2 Solder the capacitor to the test jig (glass epoxy board) shown in Fig. 1 using a eutectic solder. Then apply 10N* force in parallel with the test jig for 10T1 sec. The soldering should be done either with an iron or using the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock. *5N (GQM188) Type GQM18 GQM21 a 1.0 1.2 b 3.0 4.0 c 1.2 1.65 (in mm) Fig. 1 Solder the capacitor to the test jig (glass epoxy board) in the same manner and under the same conditions as (10). The capacitor should be subjected to a simple harmonic motion having a total amplitude of 1.5mm, the frequency being varied uniformly between the approximate limits of 10 and 55Hz. The frequency range, from 10 to 55Hz and return to 10Hz, should be traversed in approximately 1 minute. This motion should be applied for a period of 2 hours in each of 3 mutually perpendicular directions (total of 6 hours). Continued on the following page. 105 5 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. GQM Series Specifications and Test Methods (1) Continued from the preceding page. Specifications Item Appearance No marking defects Capacitance Change Within T5% or T0.5pF (Whichever is larger) 4.5 VWZ[(c)XT_\|U(R)]YZSTWQ,RV^[ Y]^(R)Z b Test Method c 12 Solder the capacitor on the test jig (glass epoxy board) shown in Fig. 2 using a eutectic solder. Then apply a force in the direction shown in Fig. 3. The soldering should be done by the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock. 40 No. 20 a Deflection 100 50 Pressurizing speed : 1.0mm/sec. Pressurize R230 t: 1.6mm 5 Type GQM18 GQM21 a 1.0 1.2 b 3.0 4.0 Flexure : V1 c 1.2 1.65 Capacitance meter 45 45 (in mm) Fig. 2 13 Solderability of Termination 75% of the terminations are to be soldered evenly and continuously. Fig. 3 Immerse the capacitor in a solution of ethanol (JIS-K-8101) and rosin (JIS-K-5902) (25% rosin in weight proportion). Preheat at 80 to 120D for 10 to 30 seconds. After preheating, immerse in eutectic solder solution for 2T0.5 seconds at 230T5D or Sn-3.0Ag-0.5Cu solder solution for 2T0.5 seconds at 245T5C. The measured and observed characteristics should satisfy the specifications in the following table. Resistance 14 to Soldering Heat Appearance No marking defects Capacitance Change Within T2.5% or T0.25 pF (Whichever is larger) Q 30pF min.: QU1400 30pF max.: QU800W20C Preheat the capacitor at 120 to 150D for 1 minute. Immerse the capacitor in a eutectic solder or Sn-3.0Ag-0.5Cu solder solution at 270T5D for 10T0.5 seconds. Let sit at room temperature for 24T2 hours. C: Nominal Capacitance (pF) I.R. More than 10,000M Dielectric Strength No failure The measured and observed characteristics should satisfy the specifications in the following table. 15 Appearance No marking defects Capacitance Change Within T2.5% or T0.25pF (Whichever is larger) Temperature Cycle 30pF min.: QU1400 30pF max.: QU800W20C Fix the capacitor to the supporting jig in the same manner and under the same conditions as (10). Perform the five cycles according to the four heat treatments listed in the following table. Let sit for 24T2 hours at room temperature, then measure. C: Nominal Capacitance (pF) 1 2 3 4 Min. Operating Room Max. Operating Room Temp. (D) Temp. W0/Y3 Temp. Temp. W3/Y0 Temp. I.R. More than 10,000M Time (min.) Dielectric Strength No failure Q Step 30T3 2 to 3 30T3 2 to 3 The measured and observed characteristics should satisfy the specifications in the following table. 16 Humidity Steady State Appearance No marking defects Capacitance Change Within T5% or T0.5pF (Whichever is larger) Q 30pF min.: QU350 10pF and over, 30pF and below: QU275+5C/2 10pF max.: QU200W10C Let the capacitor sit at 40T2D and 90 to 95% humidity for 500T12 hours. Remove and let sit for 24T2 hours (temperature compensating type) at room temperature, then measure. C: Nominal Capacitance (pF) I.R. More than 1,000M Continued on the following page. 106 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. GQM Series Specifications and TestGQM Methods (1)Specifications and Test Methods Series Continued from the preceding page. No. Specifications Item Test Method The measured and observed characteristics should satisfy the specifications in the following table. 17 Humidity Load Appearance No marking defects Capacitance Change Within T7.5% or T0.75pF (Whichever is larger) Q Apply the rated voltage at 40T2D and 90 to 95% humidity for 500T12 hours. Remove and let sit for 24T2 hours at room temperature then measure. The charge/discharge current is less than 50mA. 30pF min.: QU200 30pF max.: QU100W10C/3 C: Nominal Capacitance (pF) I.R. More than 500M 5 The measured and observed characteristics should satisfy the specifications in the following table. 18 High Temperature Load Appearance No marking defects Capacitance Change Within T3% or T0.3pF (Whichever is larger) Q 30pF min.: QU350 10pF and over, 30pF and below: QU275W5C/2 10pF max.: QU200W10C I.R. More than 1,000M Apply 200% of the rated voltage for 1000T12 hours at the maximum operating temperature T3D. Let sit for 24T2 hours (temperature compensating type) at room temperature, then measure. The charge/discharge current is less than 50mA. C: Nominal Capacitance (pF) Table A Capacitance Change from 25D (%) Char. Nominal Values (ppm/D) *1 Y30D Y55D Max. Min. 0T30 Y0.24 0.58 5C *1: Nominal values denote the temperature coefficient within a range of 25 to 125D. Max. 0.40 Y10D Min. Y0.17 Max. 0.25 Min. Y0.11 107 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. GQM Series Data Q - Frequency Characteristics Resonant Frequency - Capacitance GQM18 10000 6.8pF 2.4pF Resonant Frequency (GHz) 100 1pF Q 1000 100 10 GQM21 1 GQM18 10 0 0.1 5 1 100M 1G Frequency (Hz) 108 10G 1 10 Capacitance (pF) 100 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Chip Monolithic Ceramic Capacitors High Frequency Type ERB Series e g e 1. Negligible inductance is achieved by its monolithic structure so the series can be used at frequencies above 1GHz. 2. Nickel barriered terminations of ERB series improve solderability and decrease solder leaching. 3. ERB18/21 series are designed for both flow and reflow soldering and ERB32 series are designed for reflow soldering. Applications T Features (ERB Series) L W Dimensions (mm) Part Number L W T max. e min. ERB188 1.60.1 0.80.1 0.9 0.2 g min. 0.5 ERB21B 2.00.3 1.250.3 1.35 0.25 0.7 ERB32Q 3.20.3 2.50.3 1.7 0.3 1.0 High frequency and high-power circuits 109 6 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Capacitance Table Temperature Compensating Type C0G(5C) Characteristics 8 ex.8: T Dimension [mm] C0G(5C) TC LxW 1.6x0.8 (18) [mm] <0603> 2.0x1.25 (21) <0805> Rated Voltage 250 250 100 50 500 300 250 100 50 [Vdc] (2E) (2E) (2A) (1H) (2H) (YD) (2E) (2A) (1H) Capacitance 6 LxW 1.6x0.8 (18) [mm] <0603> 2.0x1.25 (21) <0805> 3.2x2.5 (32) <1210> Rated Voltage 250 250 100 50 500 300 250 100 50 [Vdc] (2E) (2E) (2A) (1H) (2H) (YD) (2E) (2A) (1H) Capacitance 0.50pF(R50) 8 B 47pF(470) 8 B Q 0.75pF(R75) 8 B 51pF(510) 8 B Q 1.0pF(1R0) 8 B 56pF(560) 8 B Q 1.1pF(1R1) 8 B 62pF(620) 8 B Q 1.2pF(1R2) 8 B 68pF(680) 8 B Q 1.3pF(1R3) 8 B 75pF(750) 8 B Q 1.5pF(1R5) 8 B 82pF(820) 8 B Q 1.6pF(1R6) 8 B 91pF(910) 8 B Q 1.8pF(1R8) 8 B 100pF(101) 8 B 2.0pF(2R0) 8 B 110pF(111) B Q 2.2pF(2R2) 8 B 120pF(121) B Q 2.4pF(2R4) 8 B 130pF(131) B 2.7pF(2R7) 8 B 150pF(151) B 3.0pF(3R0) 8 B 160pF(161) B 3.3pF(3R3) 8 B Q 180pF(181) Q 3.6pF(3R6) 8 B Q 200pF(201) Q 3.9pF(3R9) 8 B Q 220pF(221) Q 4.0pF(4R0) 8 B Q 240pF(241) Q 4.3pF(4R3) 8 B Q 270pF(271) Q 4.7pF(4R7) 8 B Q 300pF(301) Q 5.0pF(5R0) 8 B Q 330pF(331) Q Q Q Q Q 5.1pF(5R1) 8 B Q 360pF(361) Q 5.6pF(5R6) 8 B Q 390pF(391) Q 6.0pF(6R0) 8 B Q 430pF(431) Q 6.2pF(6R2) 8 B Q 470pF(471) Q 6.8pF(6R8) 8 B Q 510pF(511) Q 7.0pF(7R0) 8 B Q 560pF(561) Q 7.5pF(7R5) 8 B Q 620pF(621) Q 8.0pF(8R0) 8 B Q 680pF(681) Q 8.2pF(8R2) 8 B Q 750pF(751) Q 9.0pF(9R0) 8 B Q 820pF(821) Q 9.1pF(9R1) 8 B Q 910pF(911) Q 10pF(100) 8 B Q 1000pF(102) Q 11pF(110) 8 B Q 12pF(120) 8 B Q 13pF(130) 8 B Q 15pF(150) 8 B Q 16pF(160) 8 B Q 18pF(180) 8 B Q 20pF(200) 8 B Q 22pF(220) 8 B Q 24pF(240) 8 B Q 27pF(270) 8 B Q 30pF(300) 8 B Q 33pF(330) 8 B Q 36pF(360) 8 B Q 39pF(390) 8 B Q 43pF(430) 8 B Q The part number code is shown in ( ) and Unit is shown in [ ]. 110 C0G(5C) TC 3.2x2.5 (32) <1210> < >: EIA [inch] Code PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Temperature Compensating Type C0G(5C) Characteristics LxW [mm] 1.6x0.8(18)<0603> 2.0x1.25(21)<0805> 250(2E) 250(2E) Rated Volt. [Vdc] Capacitance Tolerance 0.50pF(R50) 0.75pF(R75) 1.0pF(1R0) 1.1pF(1R1) 1.2pF(1R2) 1.3pF(1R3) 1.5pF(1R5) 1.6pF(1R6) 1.8pF(1R8) 2.0pF(2R0) 2.2pF(2R2) 2.4pF(2R4) 2.7pF(2R7) 3.0pF(3R0) 3.3pF(3R3) 3.6pF(3R6) 3.9pF(3R9) 4.0pF(4R0) 4.3pF(4R3) 4.7pF(4R7) 5.0pF(5R0) 5.1pF(5R1) 5.6pF(5R6) 6.0pF(6R0) Part Number 0.1pF(B) ERB1885C2ER50BDX1D ERB21B5C2ER50BDX1L 0.25pF(C) ERB1885C2ER50CDX1D ERB21B5C2ER50CDX1L 0.1pF(B) ERB1885C2ER75BDX1D ERB21B5C2ER75BDX1L 0.25pF(C) ERB1885C2ER75CDX1D ERB21B5C2ER75CDX1L 0.1pF(B) ERB1885C2E1R0BDX1D ERB21B5C2E1R0BDX1L 0.25pF(C) ERB1885C2E1R0CDX1D ERB21B5C2E1R0CDX1L 0.1pF(B) ERB1885C2E1R1BDX1D ERB21B5C2E1R1BDX1L 0.25pF(C) ERB1885C2E1R1CDX1D ERB21B5C2E1R1CDX1L 0.1pF(B) ERB1885C2E1R2BDX1D ERB21B5C2E1R2BDX1L 0.25pF(C) ERB1885C2E1R2CDX1D ERB21B5C2E1R2CDX1L 0.1pF(B) ERB1885C2E1R3BDX1D ERB21B5C2E1R3BDX1L 0.25pF(C) ERB1885C2E1R3CDX1D ERB21B5C2E1R3CDX1L 0.1pF(B) ERB1885C2E1R5BDX1D ERB21B5C2E1R5BDX1L 0.25pF(C) ERB1885C2E1R5CDX1D ERB21B5C2E1R5CDX1L 0.1pF(B) ERB1885C2E1R6BDX1D ERB21B5C2E1R6BDX1L 0.25pF(C) ERB1885C2E1R6CDX1D ERB21B5C2E1R6CDX1L 0.1pF(B) ERB1885C2E1R8BDX1D ERB21B5C2E1R8BDX1L 0.25pF(C) ERB1885C2E1R8CDX1D ERB21B5C2E1R8CDX1L 0.1pF(B) ERB1885C2E2R0BDX1D ERB21B5C2E2R0BDX1L 0.25pF(C) ERB1885C2E2R0CDX1D ERB21B5C2E2R0CDX1L 0.1pF(B) ERB1885C2E2R2BDX1D ERB21B5C2E2R2BDX1L 0.25pF(C) ERB1885C2E2R2CDX1D ERB21B5C2E2R2CDX1L 0.1pF(B) ERB1885C2E2R4BDX1D ERB21B5C2E2R4BDX1L 0.25pF(C) ERB1885C2E2R4CDX1D ERB21B5C2E2R4CDX1L 0.1pF(B) ERB1885C2E2R7BDX1D ERB21B5C2E2R7BDX1L 0.25pF(C) ERB1885C2E2R7CDX1D ERB21B5C2E2R7CDX1L 0.1pF(B) ERB1885C2E3R0BDX1D ERB21B5C2E3R0BDX1L 0.25pF(C) ERB1885C2E3R0CDX1D ERB21B5C2E3R0CDX1L 0.1pF(B) ERB1885C2E3R3BDX1D ERB21B5C2E3R3BDX1L 0.25pF(C) ERB1885C2E3R3CDX1D ERB21B5C2E3R3CDX1L 0.1pF(B) ERB1885C2E3R6BDX1D ERB21B5C2E3R6BDX1L 0.25pF(C) ERB1885C2E3R6CDX1D ERB21B5C2E3R6CDX1L 0.1pF(B) ERB1885C2E3R9BDX1D ERB21B5C2E3R9BDX1L 0.25pF(C) ERB1885C2E3R9CDX1D ERB21B5C2E3R9CDX1L 0.1pF(B) ERB1885C2E4R0BDX1D ERB21B5C2E4R0BDX1L 0.25pF(C) ERB1885C2E4R0CDX1D ERB21B5C2E4R0CDX1L 0.1pF(B) ERB1885C2E4R3BDX1D ERB21B5C2E4R3BDX1L 0.25pF(C) ERB1885C2E4R3CDX1D ERB21B5C2E4R3CDX1L 0.1pF(B) ERB1885C2E4R7BDX1D ERB21B5C2E4R7BDX1L 0.25pF(C) ERB1885C2E4R7CDX1D ERB21B5C2E4R7CDX1L 0.1pF(B) ERB1885C2E5R0BDX1D ERB21B5C2E5R0BDX1L 0.25pF(C) ERB1885C2E5R0CDX1D ERB21B5C2E5R0CDX1L 0.1pF(B) ERB1885C2E5R1BDX1D ERB21B5C2E5R1BDX1L 0.25pF(C) ERB1885C2E5R1CDX1D ERB21B5C2E5R1CDX1L 0.5pF(D) ERB1885C2E5R1DDX1D ERB21B5C2E5R1DDX1L 0.1pF(B) ERB1885C2E5R6BDX1D ERB21B5C2E5R6BDX1L 0.25pF(C) ERB1885C2E5R6CDX1D ERB21B5C2E5R6CDX1L 0.5pF(D) ERB1885C2E5R6DDX1D ERB21B5C2E5R6DDX1L 0.1pF(B) ERB1885C2E6R0BDX1D ERB21B5C2E6R0BDX1L 0.25pF(C) ERB1885C2E6R0CDX1D ERB21B5C2E6R0CDX1L 0.5pF(D) ERB1885C2E6R0DDX1D ERB21B5C2E6R0DDX1L The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code qProduct ID wSeries tTemperature Characteristics u i o !0 iCapacitance Tolerance q w e r t y Packaging Code in Part Number is a code shows STD 180mm Reel Taping. (Part Number) ER B 18 8 5C 2E R50 B 6 DX1 D eDimension (LxW) yRated Voltage oIndividual Specification Code rDimension (T) uCapacitance !0Packaging 111 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Temperature Compensating Type C0G(5C) Characteristics LxW [mm] 1.6x0.8(18)<0603> 2.0x1.25(21)<0805> 250(2E) 250(2E) Rated Volt. [Vdc] Capacitance Tolerance 6.2pF(6R2) 6.8pF(6R8) 7.0pF(7R0) Part Number 0.1pF(B) ERB1885C2E6R2BDX1D ERB21B5C2E6R2BDX1L 0.25pF(C) ERB1885C2E6R2CDX1D ERB21B5C2E6R2CDX1L 0.5pF(D) ERB1885C2E6R2DDX1D ERB21B5C2E6R2DDX1L 0.1pF(B) ERB1885C2E6R8BDX1D ERB21B5C2E6R8BDX1L 0.25pF(C) ERB1885C2E6R8CDX1D ERB21B5C2E6R8CDX1L 0.5pF(D) ERB1885C2E6R8DDX1D ERB21B5C2E6R8DDX1L 0.1pF(B) ERB1885C2E7R0BDX5D ERB21B5C2E7R0BDX1L 0.25pF(C) ERB1885C2E7R0CDX5D ERB21B5C2E7R0CDX1L 0.5pF(D) ERB1885C2E7R0DDX5D ERB21B5C2E7R0DDX1L 0.1pF(B) ERB1885C2E7R5BDX5D ERB21B5C2E7R5BDX1L 0.25pF(C) ERB1885C2E7R5CDX5D ERB21B5C2E7R5CDX1L 0.5pF(D) ERB1885C2E7R5DDX5D ERB21B5C2E7R5DDX1L 0.1pF(B) ERB1885C2E8R0BDX5D ERB21B5C2E8R0BDX1L 0.25pF(C) ERB1885C2E8R0CDX5D ERB21B5C2E8R0CDX1L 0.5pF(D) ERB1885C2E8R0DDX5D ERB21B5C2E8R0DDX1L 0.1pF(B) ERB1885C2E8R2BDX5D ERB21B5C2E8R2BDX1L 0.25pF(C) ERB1885C2E8R2CDX5D ERB21B5C2E8R2CDX1L 0.5pF(D) ERB1885C2E8R2DDX5D ERB21B5C2E8R2DDX1L 0.1pF(B) ERB1885C2E9R0BDX5D ERB21B5C2E9R0BDX1L 0.25pF(C) ERB1885C2E9R0CDX5D ERB21B5C2E9R0CDX1L 0.5pF(D) ERB1885C2E9R0DDX5D ERB21B5C2E9R0DDX1L 0.1pF(B) ERB1885C2E9R1BDX5D ERB21B5C2E9R1BDX1L 0.25pF(C) ERB1885C2E9R1CDX5D ERB21B5C2E9R1CDX1L 0.5pF(D) ERB1885C2E9R1DDX5D ERB21B5C2E9R1DDX1L 2%(G) ERB1885C2E100GDX5D ERB21B5C2E100GDX1L 5%(J) ERB1885C2E100JDX5D ERB21B5C2E100JDX1L 11pF(110) 2%(G) ERB1885C2E110GDX5D ERB21B5C2E110GDX1L 5%(J) ERB1885C2E110JDX5D ERB21B5C2E110JDX1L 12pF(120) 2%(G) ERB1885C2E120GDX5D ERB21B5C2E120GDX1L 5%(J) ERB1885C2E120JDX5D ERB21B5C2E120JDX1L 13pF(130) 2%(G) ERB1885C2E130GDX5D ERB21B5C2E130GDX1L 5%(J) ERB1885C2E130JDX5D ERB21B5C2E130JDX1L 2%(G) ERB1885C2E150GDX5D ERB21B5C2E150GDX1L 5%(J) ERB1885C2E150JDX5D ERB21B5C2E150JDX1L 16pF(160) 2%(G) ERB1885C2E160GDX5D ERB21B5C2E160GDX1L 5%(J) ERB1885C2E160JDX5D ERB21B5C2E160JDX1L 18pF(180) 2%(G) ERB1885C2E180GDX5D ERB21B5C2E180GDX1L 5%(J) ERB1885C2E180JDX5D ERB21B5C2E180JDX1L 20pF(200) 2%(G) ERB1885C2E200GDX5D ERB21B5C2E200GDX1L 5%(J) ERB1885C2E200JDX5D ERB21B5C2E200JDX1L 2%(G) ERB1885C2E220GDX5D ERB21B5C2E220GDX1L 5%(J) ERB1885C2E220JDX5D ERB21B5C2E220JDX1L 24pF(240) 2%(G) ERB1885C2E240GDX5D ERB21B5C2E240GDX1L 5%(J) ERB1885C2E240JDX5D ERB21B5C2E240JDX1L 27pF(270) 2%(G) ERB1885C2E270GDX5D ERB21B5C2E270GDX1L 5%(J) ERB1885C2E270JDX5D ERB21B5C2E270JDX1L 30pF(300) 2%(G) ERB1885C2E300GDX5D ERB21B5C2E300GDX1L 5%(J) ERB1885C2E300JDX5D ERB21B5C2E300JDX1L 2%(G) ERB1885C2E330GDX5D ERB21B5C2E330GDX1L 5%(J) ERB1885C2E330JDX5D ERB21B5C2E330JDX1L 7.5pF(7R5) 6 8.0pF(8R0) 8.2pF(8R2) 9.0pF(9R0) 9.1pF(9R1) 10pF(100) 15pF(150) 22pF(220) 33pF(330) The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code qProduct ID wSeries tTemperature Characteristics u i o !0 iCapacitance Tolerance q w e r t y Packaging Code in Part Number is a code shows STD 180mm Reel Taping. (Part Number) ER 112 B 18 8 5C 2E 6R2 B DX1 D eDimension (LxW) yRated Voltage oIndividual Specification Code rDimension (T) uCapacitance !0Packaging PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Temperature Compensating Type C0G(5C) Characteristics 1.6x0.8(18)<0603> LxW [mm] 250(2E) Rated Volt. [Vdc] Capacitance 2.0x1.25(21)<0805> 250(2E) Tolerance 100(2A) 2%(G) ERB1885C2E360GDX5D 5%(J) ERB1885C2E360JDX5D ERB21B5C2E360JDX1L 39pF(390) 2%(G) ERB1885C2E390GDX5D ERB21B5C2E390GDX1L 5%(J) ERB1885C2E390JDX5D ERB21B5C2E390JDX1L 43pF(430) 2%(G) ERB1885C2E430GDX5D ERB21B5C2E430GDX1L 5%(J) ERB1885C2E430JDX5D ERB21B5C2E430JDX1L 47pF(470) 2%(G) ERB1885C2E470GDX5D ERB21B5C2E470GDX1L 5%(J) ERB1885C2E470JDX5D ERB21B5C2E470JDX1L 51pF(510) 2%(G) ERB1885C2E510GDX5D ERB21B5C2E510GDX1L 5%(J) ERB1885C2E510JDX5D ERB21B5C2E510JDX1L 56pF(560) 2%(G) ERB1885C2E560GDX5D ERB21B5C2E560GDX1L 5%(J) ERB1885C2E560JDX5D ERB21B5C2E560JDX1L 62pF(620) 2%(G) ERB1885C2E620GDX5D ERB21B5C2E620GDX1L 5%(J) ERB1885C2E620JDX5D ERB21B5C2E620JDX1L 68pF(680) 2%(G) ERB1885C2E680GDX5D ERB21B5C2E680GDX1L 5%(J) ERB1885C2E680JDX5D ERB21B5C2E680JDX1L 2%(G) ERB1885C2E750GDX5D ERB21B5C2E750GDX1L 5%(J) ERB1885C2E750JDX5D ERB21B5C2E750JDX1L 82pF(820) 2%(G) ERB1885C2E820GDX5D ERB21B5C2E820GDX1L 5%(J) ERB1885C2E820JDX5D ERB21B5C2E820JDX1L 91pF(910) 2%(G) ERB1885C2E910GDX5D ERB21B5C2E910GDX1L 5%(J) ERB1885C2E910JDX5D ERB21B5C2E910JDX1L 100pF(101) 2%(G) ERB1885C2E101GDX5D ERB21B5C2E101GDX1L 5%(J) ERB1885C2E101JDX5D ERB21B5C2E101JDX1L 110pF(111) 2%(G) ERB21B5C2A111GDX1L 5%(J) ERB21B5C2A111JDX1L 2%(G) ERB21B5C2A121GDX1L 36pF(360) 75pF(750) 120pF(121) ERB21B5C2E360GDX1L 6 5%(J) ERB21B5C2A121JDX1L 130pF(131) 2%(G) ERB21B5C2A131GDX1L 5%(J) ERB21B5C2A131JDX1L 150pF(151) 2%(G) 160pF(161) 50(1H) Part Number ERB21B5C1H151GDX1L 5%(J) ERB21B5C1H151JDX1L 2%(G) ERB21B5C1H161GDX1L 5%(J) The part number code is shown in ( ) and Unit is shown in [ ]. ERB21B5C1H161JDX1L < >: EIA [inch] Code 113 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Temperature Compensating Type C0G(5C) Characteristics 3.2x2.5(32)<1210> LxW [mm] 500(2H) Rated Volt. [Vdc] Capacitance Tolerance 3.3pF(3R3) 3.6pF(3R6) 3.9pF(3R9) 4.0pF(4R0) 4.3pF(4R3) 6 4.7pF(4R7) 5.0pF(5R0) 5.1pF(5R1) 5.6pF(5R6) 6.0pF(6R0) 6.2pF(6R2) 6.8pF(6R8) 7.0pF(7R0) 7.5pF(7R5) 8.0pF(8R0) 8.2pF(8R2) 9.0pF(9R0) 9.1pF(9R1) 10pF(100) 3.2x2.5(32)<1210> 500(2H) Rated Volt. [Vdc] Capacitance Part Number 0.1pF(B) ERB32Q5C2H3R3BDX1L 0.25pF(C) ERB32Q5C2H3R3CDX1L 0.1pF(B) ERB32Q5C2H3R6BDX1L 0.25pF(C) ERB32Q5C2H3R6CDX1L 0.1pF(B) ERB32Q5C2H3R9BDX1L 0.25pF(C) ERB32Q5C2H3R9CDX1L 0.1pF(B) ERB32Q5C2H4R0BDX1L 0.25pF(C) ERB32Q5C2H4R0CDX1L 0.1pF(B) ERB32Q5C2H4R3BDX1L 0.25pF(C) ERB32Q5C2H4R3CDX1L 0.1pF(B) ERB32Q5C2H4R7BDX1L 0.25pF(C) ERB32Q5C2H4R7CDX1L 0.1pF(B) ERB32Q5C2H5R0BDX1L 0.25pF(C) ERB32Q5C2H5R0CDX1L 0.1pF(B) ERB32Q5C2H5R1BDX1L 0.25pF(C) ERB32Q5C2H5R1CDX1L 0.5pF(D) ERB32Q5C2H5R1DDX1L 0.1pF(B) ERB32Q5C2H5R6BDX1L 0.25pF(C) ERB32Q5C2H5R6CDX1L 0.5pF(D) ERB32Q5C2H5R6DDX1L 0.1pF(B) ERB32Q5C2H6R0BDX1L 0.25pF(C) ERB32Q5C2H6R0CDX1L 0.5pF(D) ERB32Q5C2H6R0DDX1L 0.1pF(B) ERB32Q5C2H6R2BDX1L 0.25pF(C) ERB32Q5C2H6R2CDX1L 0.5pF(D) ERB32Q5C2H6R2DDX1L 0.1pF(B) ERB32Q5C2H6R8BDX1L 0.25pF(C) ERB32Q5C2H6R8CDX1L 0.5pF(D) ERB32Q5C2H6R8DDX1L 0.1pF(B) ERB32Q5C2H7R0BDX1L 0.25pF(C) ERB32Q5C2H7R0CDX1L 0.5pF(D) ERB32Q5C2H7R0DDX1L 0.1pF(B) ERB32Q5C2H7R5BDX1L 0.25pF(C) ERB32Q5C2H7R5CDX1L 0.5pF(D) ERB32Q5C2H7R5DDX1L 0.1pF(B) ERB32Q5C2H8R0BDX1L 0.25pF(C) ERB32Q5C2H8R0CDX1L 0.5pF(D) ERB32Q5C2H8R0DDX1L 0.1pF(B) ERB32Q5C2H8R2BDX1L 0.25pF(C) ERB32Q5C2H8R2CDX1L 0.5pF(D) ERB32Q5C2H8R2DDX1L 0.1pF(B) ERB32Q5C2H9R0BDX1L 0.25pF(C) ERB32Q5C2H9R0CDX1L 0.5pF(D) ERB32Q5C2H9R0DDX1L 0.1pF(B) ERB32Q5C2H9R1BDX1L 0.25pF(C) ERB32Q5C2H9R1CDX1L 0.5pF(D) ERB32Q5C2H9R1DDX1L 2%(G) ERB32Q5C2H100GDX1L 5%(J) ERB32Q5C2H100JDX1L The part number code is shown in ( ) and Unit is shown in [ ]. LxW [mm] 11pF(110) Tolerance 2%(G) 114 B 32 Q 5C 2H 3R3 B ERB32Q5C2H110GDX1L 5%(J) ERB32Q5C2H110JDX1L 12pF(120) 2%(G) ERB32Q5C2H120GDX1L 5%(J) ERB32Q5C2H120JDX1L 13pF(130) 2%(G) ERB32Q5C2H130GDX1L 5%(J) ERB32Q5C2H130JDX1L 15pF(150) 2%(G) ERB32Q5C2H150GDX1L 5%(J) ERB32Q5C2H150JDX1L 16pF(160) 2%(G) ERB32Q5C2H160GDX1L 5%(J) ERB32Q5C2H160JDX1L 2%(G) ERB32Q5C2H180GDX1L 18pF(180) 5%(J) ERB32Q5C2H180JDX1L 20pF(200) 2%(G) ERB32Q5C2H200GDX1L 5%(J) ERB32Q5C2H200JDX1L 22pF(220) 2%(G) ERB32Q5C2H220GDX1L 5%(J) ERB32Q5C2H220JDX1L 2%(G) ERB32Q5C2H240GDX1L 24pF(240) 5%(J) ERB32Q5C2H240JDX1L 27pF(270) 2%(G) ERB32Q5C2H270GDX1L 5%(J) ERB32Q5C2H270JDX1L 30pF(300) 2%(G) ERB32Q5C2H300GDX1L 5%(J) ERB32Q5C2H300JDX1L 33pF(330) 2%(G) ERB32Q5C2H330GDX1L 5%(J) ERB32Q5C2H330JDX1L 36pF(360) 2%(G) ERB32Q5C2H360GDX1L 5%(J) ERB32Q5C2H360JDX1L 2%(G) ERB32Q5C2H390GDX1L 39pF(390) 5%(J) ERB32Q5C2H390JDX1L 43pF(430) 2%(G) ERB32Q5C2H430GDX1L 5%(J) ERB32Q5C2H430JDX1L 47pF(470) 2%(G) ERB32Q5C2H470GDX1L 5%(J) ERB32Q5C2H470JDX1L 2%(G) ERB32Q5C2H510GDX1L 51pF(510) 5%(J) ERB32Q5C2H510JDX1L 56pF(560) 2%(G) ERB32Q5C2H560GDX1L 5%(J) ERB32Q5C2H560JDX1L 62pF(620) 2%(G) ERB32Q5C2H620GDX1L 5%(J) ERB32Q5C2H620JDX1L 68pF(680) 2%(G) ERB32Q5C2H680GDX1L 5%(J) ERB32Q5C2H680JDX1L 75pF(750) 2%(G) ERB32Q5C2H750GDX1L 5%(J) ERB32Q5C2H750JDX1L 2%(G) ERB32Q5C2H820GDX1L 82pF(820) 5%(J) ERB32Q5C2H820JDX1L 91pF(910) 2%(G) ERB32Q5C2H910GDX1L 5%(J) ERB32Q5C2H910JDX1L 100pF(101) 2%(G) ERB32Q5C2H101GDX1L 5%(J) ERB32Q5C2H101JDX1L < >: EIA [inch] Code qProduct ID wSeries tTemperature Characteristics u i o !0 iCapacitance Tolerance q w e r t y Packaging Code in Part Number is a code shows STD 180mm Reel Taping. (Part Number) ER Part Number DX1 L eDimension (LxW) yRated Voltage oIndividual Specification Code rDimension (T) uCapacitance !0Packaging PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Temperature Compensating Type C0G(5C) Characteristics 3.2x2.5(32)<1210> LxW [mm] 500(2H) Rated Volt. [Vdc] Capacitance 110pF(111) 300(YD) Tolerance 2%(G) 250(2E) ERB32Q5C2H111GDX1L 5%(J) ERB32Q5C2H111JDX1L 120pF(121) 2%(G) ERB32Q5C2H121GDX1L 5%(J) ERB32Q5C2H121JDX1L 130pF(131) 2%(G) ERB32Q5CYD131GDX1L 5%(J) ERB32Q5CYD131JDX1L 150pF(151) 2%(G) ERB32Q5CYD151GDX1L 5%(J) ERB32Q5CYD151JDX1L 160pF(161) 2%(G) 180pF(181) 200pF(201) 100(2A) Part Number ERB32Q5C2E161GDX1L 5%(J) ERB32Q5C2E161JDX1L 2%(G) ERB32Q5C2E181GDX1L 5%(J) ERB32Q5C2E181JDX1L 2%(G) ERB32Q5C2E201GDX1L 5%(J) ERB32Q5C2E201JDX1L 220pF(221) 2%(G) ERB32Q5C2E221GDX1L 5%(J) ERB32Q5C2E221JDX1L 240pF(241) 2%(G) 6 ERB32Q5C2A241GDX1L 5%(J) ERB32Q5C2A241JDX1L 270pF(271) 2%(G) ERB32Q5C2A271GDX1L 5%(J) ERB32Q5C2A271JDX1L 300pF(301) 2%(G) ERB32Q5C2A301GDX1L 5%(J) ERB32Q5C2A301JDX1L 330pF(331) 2%(G) ERB32Q5C2A331GDX1L 5%(J) ERB32Q5C2A331JDX1L 360pF(361) 2%(G) ERB32Q5C2A361GDX1L 5%(J) ERB32Q5C2A361JDX1L 390pF(391) 2%(G) ERB32Q5C2A391GDX1L 5%(J) ERB32Q5C2A391JDX1L 430pF(431) 2%(G) ERB32Q5C2A431GDX1L 5%(J) ERB32Q5C2A431JDX1L 470pF(471) 2%(G) ERB32Q5C2A471GDX1L 5%(J) ERB32Q5C2A471JDX1L 3.2x2.5(32)<1210> LxW [mm] 50(1H) Rated Volt. [Vdc] Capacitance 510pF(511) Tolerance 2%(G) Part Number ERB32Q5C1H511GDX1L 5%(J) ERB32Q5C1H511JDX1L 560pF(561) 2%(G) ERB32Q5C1H561GDX1L 5%(J) ERB32Q5C1H561JDX1L 620pF(621) 2%(G) ERB32Q5C1H621GDX1L 5%(J) ERB32Q5C1H621JDX1L 680pF(681) 2%(G) ERB32Q5C1H681GDX1L 5%(J) ERB32Q5C1H681JDX1L 750pF(751) 2%(G) ERB32Q5C1H751GDX1L 5%(J) ERB32Q5C1H751JDX1L 820pF(821) 2%(G) ERB32Q5C1H821GDX1L 5%(J) ERB32Q5C1H821JDX1L 910pF(911) 2%(G) ERB32Q5C1H911GDX1L 5%(J) ERB32Q5C1H911JDX1L 1000pF(102) 2%(G) ERB32Q5C1H102GDX1L 5%(J) ERB32Q5C1H102JDX1L The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code 115 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. ERB Series Specifications and Test Methods Method (1) Item 1 Operating Temperature Range Specifications Test Method Y55 to W125D Reference Temperature: 25C See the previous pages. The rated voltage is defined as the maximum voltage which may be applied continuously to the capacitor. When AC voltage is superimposed on DC voltage, VP-P or VO-P, whichever is larger, should be maintained within the rated voltage range. 2 Rated Voltage 3 Appearance No defects or abnormalities Visual inspection 4 Dimensions Within the specified dimension Using calipers 5 Dielectric Strength No defects or abnormalities No failure should be observed when 300%(*) of the rated voltage is applied between the terminations for 1 to 5 seconds, provided the charge/discharge current is less than 50mA. (*) 300V: 250%, 500V: 200% 6 Insulation Resistance 1,000,000M min. (CV470pF) 0,100,000M min. (CG470pF) (I.R.) 7 Capacitance Within the specified tolerance Q 220pF<CV1,220pF : QU10,000 220pF<CV1,470pF : QU15,000 470pF<CV1,000pF : QU13,000 C: Nominal Capacitance (pF) 8 9 The insulation resistance should be measured with a DC voltage not exceeding the rated voltage at 25D and standard humidity and within 2 minutes of charging. The capacitance/Q should be measured at 25D at the frequency and voltage shown in the table. Frequency Voltage Capacitance Change Within the specified tolerance (Table A-6) Temperature Coefficient Within the specified tolerance (Table A-6) Capacitance Drift Within T0.2% or T0.05pF (Whichever is larger) No removal of the terminations or other defects should occur. c Adhesive Strength of Termination 3 25T2 4 125T3 5 25T2 Solder the capacitor on the test jig (glass epoxy board) shown in Fig. 1 using an eutectic solder. Then apply 10N* force in parallel with the test jig for 101sec. The soldering should be done either with an iron or using the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock. a 10 1T0.1MHz 1T0.2Vrms The temperature coefficient is determined using the capacitance measured in step 3 as a reference. When cycling the temperature sequentially from step 1 through 5, the capacitance should be within the specified tolerance for the temperature coefficient and capacitance change as Table A. The capacitance drift is calculated by dividing the differences between the maximum and minimum measured values in steps 1, 3 and 5 by the capacitance value in step 3. Step Temperature (D) 1 25T2 2 Y55T3 Capacitance Temperature Characteristics b 6 No. Solder Resist Fig.1 Baked Electrode or Copper Foil Type ERB18 ERB21 ERB32 a 1.0 1.2 2.2 b 3.0 4.0 5.0 c 1.2 1.65 2.9 (in mm) *5N (ERB188) Continued on the following page. 116 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. ERB Series Specifications and Test Method (1) Specifications and Test Methods ERB Series Continued from the preceding page. 11 Specifications Item Appearance No defects or abnormalities Capacitance Within the specified tolerance Q Satisfies the initial value. 220pFFCV1,220pF : QU10,000 220pFFCV1,470pF : QU15,000 470pFFCV1,000pF : QU13,000 C: Nominal Capacitance (pF) Vibration Resistance Appearance No marking defects Capacitance Change Within T5% or T0.5pF (Whichever is larger) 20 Deflection Solder the capacitor to the test jig (glass epoxy board) in the same manner and under the same conditions as (10). The capacitor should be subjected to a simple harmonic motion having a total amplitude of 1.5mm, the frequency being varied uniformly between the approximate limits of 10 and 55Hz. The frequency range, from 10 to 55Hz and return to 10Hz, should be traversed in approximately 1 minute. This motion should be applied for a period of 2 hours in each of 3 mutually perpendicular directions (total of 6 hours). 50 Pressurizing speed : 1.0mm/sec. Pressurize b o4.5 R230 Flexure : V1 c a Capacitance meter 45 45 Fig.3a 13 Solderability of Termination Resistance to Soldering Heat Q Dielectric Strength a 1.0 1.2 2.2 b 3.0 4.0 5.0 c 1.2 1.65 2.9 (in mm) t : 1.6mm Fig. 2a 95% of the terminations are to be soldered evenly and continuously. Item Appearance Capacitance Change Type ERB18 ERB21 ERB32 100 The measured and observed characteristics should satisfy the specifications in the following table. 14 Solder the capacitor on the test jig (glass epoxy board) shown in Fig. 2a using an eutectic solder. Then apply a force in the direction shown in Fig. 3a. The soldering should be done by the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock. (c)_[\WXT(R)|]YZU,QRSVW (R)]^ 12 Test Method 40 No. Specifications No marked defect Within T2.5% or T0.25pF (Whichever is larger) 220pFFCV1,220pF : QU10,000 220pFFCV1,470pF : QU15,000 470pFFCV1,000pF : QU13,000 No failure Immerse the capacitor in a solution of isopropyl alcohol and rosin (25% rosin in weight proportion). Preheat at 80 to 120D for 10 to 30 seconds. After preheating, immerse in an eutectic solder or Sn-3.0Ag-0.5Cu solder solution for 50.5 seconds at 2455D. Preheat according to the conditions listed in the table below. Immerse the capacitor in an eutectic solder or Sn-3.0Ag-0.5Cu solder solution at 2705D for 100.5 seconds. Let sit at room temperature for 242 hours. Chip Size 2.0Z1.25mm max. 3.2Z2.5mm Preheat Condition 1minute at 120 to 150D Each 1 minute at 100 to 120D and then 170 to 200D C: Nominal Capacitance (pF) The measured and observed characteristics should satisfy the specifications in the following table. 15 Temperature Cycle Item Appearance Capacitance Change Q I.R. Dielectric Strength Specifications No marked defect Within T5% or T0.5pF (Whichever is larger) 10pFVCU30pF : QU350 10pFVCF30pF : QU275W 5 2 C 10pFVCF10pF : QU200W10C 1,000M min. No failure Fix the capacitor to the supporting jig in the same manner and under the same conditions as (10). Perform the five cycles according to the four heat treatments listed in the following table. Let sit for 24T2 hours at room temperature, then measure. Step 1 2 3 4 Min. Max. Room Room Operating Operating Temp. (D) Temp. Temp. Temp. W0/Y3 Temp. W3/Y0 Time (min.) 30T3 5 max. 30T3 5 max. C: Nominal Capacitance (pF) Continued on the following page. 117 6 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. ERB Series Specifications and Test Methods Method (1) Continued from the preceding page. No. Specifications Item Test Method 16 Humidity The measured and observed characteristics should satisfy the specifications in the following table. Item Specifications No marked defect Appearance Within T5% or T0.5pF Capacitance (Whichever is larger) Change 10pFVCU30pF : QU350 10pFVCF30pF : QU275W 5 2 C Q 10pFVCF10pF : QU200W10C 1,000M min. I.R. C: Nominal Capacitance (pF) 6 Temperature Apply the 24-hour heat (Y10 to W65D) and humidity (80 to 100%) treatment shown below, 10 consecutive times. Remove, let sit for 24T2 hours at room temperature, and measure. D 70 65 60 55 50 45 40 35 30 25 20 15 10 5 0 -5 -10 Humidity Humidity Humidity 80-98% Humidity 80-98% 90-98% Humidity90-98% 90-98% +10 -2 D Initial measurement Applied voltage 50Vdc One cycle 24 hours 0 1 2 3 4 5 6 7 8 9 10 1112 13 14 15 16 17 18 19 2021 22 23 24 Hours The measured and observed characteristics should satisfy the specifications in the following table. 17 High Temperature Load Item Appearance Capacitance Change Q I.R. Specifications No marked defect Within T3% or T0.3pF (Whichever is larger) 10pFVCU30pF : QU350 10pFVCF30pF : QU275W 5 2 C 10pFVCF10pF : QU200W10C 1,000M min. Apply 200% (500V only 150%) of the rated voltage for 1,000T12 hours at 125T3D. Remove and let sit for 24T2 hours at room temperature, then measure. The charge/discharge current is less than 50mA. C: Nominal Capacitance (pF) Table A-6 Capacitance Change from 25D (%) Char. Nominal Values (ppm/D) Note 1 Y55 Max. Min. Max. 0T30 Y0.24 0.58 0.40 5C Note 1: Nominal values denote the temperature coefficient within a range of 25 to 125D (for 5C) 118 Y30 Y10 Min. Y0.17 Max. 0.25 Min. Y0.11 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. ERB Series Data ERB Series Data Q - Frequency Characteristics Impedance - Frequency Characteristics ERB Series ERB Series ERB21 100000 ERB21 100k 10k 10000 PARALLEL RESONANCE 1k 1000 100 Impedance (Ohm) Q 1pF 100 10pF 10 10 1 1pF 100pF 6 10pF 100m 100pF 1 10m measured by BOONTON RESONANT COAXIAL-LINE 34A 0.1 100M 1G Frequency (Hz) 1m 1M 10G ESR - Frequency Characteristics 10M 1G 10G Self Resonant Frequency - Capacitance ERB Series ERB Series ERB21 100G Self Resonant Frequency (Hz) 1 ESR (Ohm) 100M Frequency (Hz) 1pF 10pF 100pF 0.1 13 10G ERB21 1G ERB32 measured by BOONTON RESONANT COAXIAL-LINE 34A 0.01 100M 1G 100M 0.1 10G 1 10 Capacitance (pF) Frequency (Hz) Allowable Voltage - Frequency [T=20C] [T=20C] 10 F p 00 ERB32 10 B2 1 B3 2 F 0p 10 100m 1 100pF 1000pF 0.1 10M ERB21 1 Ia (Arms) Va (Vrms) ER ER 1000 Allowable Current - Frequency 100 10 100 100M 1G Frequency (Hz) 10G 10m 10M 100M 1G 10G Frequency (Hz) Continued on the following page. 119 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. ERB Series Data Continued from the preceding page. Allowable Apparent Power - Frequency Allowable Effective Power - Frequency [T=20C] 100 B2 1 Pe (W) 10 00 pF 0 10 ER 100m pF Pa (VA) B3 1 B2 2 ER 10 ER pF 00 2 B3 ER 10 [T=20C] 1 10m 10 0p F 1 0.1 10M 100M 1G Frequency (Hz) 6 10G 1m 10M 100M 1G 10G Frequency (Hz) 13 120 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Chip Monolithic Ceramic Capacitors Monolithic Microchip GMA Series L W Features T 1. Better micro wave characteristics 2. Suitable for by-passing 3. High density mounting Outer electrode: Au plated Applications 1. Optical device for telecommunication 2. IC, IC packaging built-in 3. Measuring equipment Part Number GMA0D3 GMA05X GMA085 L 0.38 0.05 0.5 0.05 0.8 0.05 Dimensions (mm) W 0.38 0.05 0.5 0.05 0.8 0.05 T 0.3 0.05 0.35 0.05 0.5 0.1 7 Capacitance Table High Dielectric Constant Type X7R(R7)/X5R(R6) Characteristics X ex.X: T Dimension [mm] LxW 0.38x0.38 (0D) [mm] <015015> Rated Voltage [Vdc] 10 (1A) TC X7R (R7) Capacitance 0.5x0.5 (05) <0202> 100 (2A) 25 (1E) 0.8x0.8 (08) <0303> 10 (1A) X7R (R7) 100pF(101) X 150pF(151) X 220pF(221) X 330pF(331) X 470pF(471) X 680pF(681) X 1000pF(102) X 6.3 (0J) 100 (2A) X5R (R6) X 5 2200pF(222) X 5 3300pF(332) X 5 4700pF(472) X 10000pF(103) X5R (R6) 5 X 5 15000pF(153) X 5 22000pF(223) X 5 33000pF(333) 5 47000pF(473) 5 68000pF(683) 5 0.10F(104) X 0.47F(474) The part number code is shown in ( ) and Unit is shown in [ ]. 6.3 (0J) 5 X 3 10 (1A) X7R (R7) 1500pF(152) 6800pF(682) 25 (1E) 5 5 < >: EIA [inch] Code 121 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. High Dielectric Constant Type X7R(R7)/X5R(R6) Characteristics 0.38x0.38(0D)<015015> LxW [mm] 10(1A) Rated Volt. [Vdc] Capacitance Tolerance Part Number 20%(M) 10000pF(103) GMA0D3R71A103MA01T 0.5x0.5(05)<0202> LxW [mm] 100(2A) Rated Volt. [Vdc] Capacitance 7 25(1E) Tolerance 10(1A) 6.3(0J) Part Number 100pF(101) 20%(M) GMA05XR72A101MA01T 150pF(151) 20%(M) GMA05XR72A151MA01T 220pF(221) 20%(M) GMA05XR72A221MA01T 330pF(331) 20%(M) GMA05XR72A331MA01T 470pF(471) 20%(M) GMA05XR72A471MA01T 680pF(681) 20%(M) GMA05XR72A681MA01T 1000pF(102) 20%(M) GMA05XR72A102MA01T 1500pF(152) 20%(M) GMA05XR71E152MA11T 2200pF(222) 20%(M) GMA05XR71E222MA11T 3300pF(332) 20%(M) GMA05XR71E332MA11T 4700pF(472) 20%(M) GMA05XR71E472MA11T 6800pF(682) 20%(M) GMA05XR71A682MA01T 10000pF(103) 20%(M) GMA05XR71A103MA01T 15000pF(153) 20%(M) GMA05XR71A153MA01T 22000pF(223) 20%(M) GMA05XR71A223MA01T 33000pF(333) 20%(M) 47000pF(473) 20%(M) 68000pF(683) 20%(M) 0.10F(104) 20%(M) GMA05XR60J104ME12T* 0.8x0.8(08)<0303> LxW [mm] 100(2A) Rated Volt. [Vdc] Capacitance 25(1E) Tolerance 10(1A) 6.3(0J) Part Number 1500pF(152) 20%(M) GMA085R72A152MA01T 2200pF(222) 20%(M) GMA085R72A222MA01T 3300pF(332) 20%(M) GMA085R72A332MA01T 4700pF(472) 20%(M) GMA085R72A472MA01T 6800pF(682) 20%(M) GMA085R72A682MA01T 10000pF(103) 20%(M) GMA085R71E103MA11T 15000pF(153) 20%(M) GMA085R71E153MA11T 22000pF(223) 20%(M) GMA085R71E223MA11T 33000pF(333) 20%(M) GMA085R71A333MA01T 47000pF(473) 20%(M) GMA085R71A473MA01T 68000pF(683) 20%(M) GMA085R71A683MA01T 0.10F(104) 20%(M) GMA085R71A104MA01T 0.47F(474) 20%(M) GMA085R60J474ME12T* The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code *: Please refer to GMA series Specifications and Test Method(2). (Part Number) GM A 0D 3 R7 1A q w e r t y 103 M u i A01 T o Packaging Code in Part Number is a code shows STD Tray. 122 !0 qProduct ID wSeries tTemperature Characteristics iCapacitance Tolerance eDimension (LxW) yRated Voltage oIndividual Specification Code rDimension (T) uCapacitance !0Packaging PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. GMA Series Specifications and Test Methods (1) GMA Series Specifications and Test Methods(1) In case Non "*" is added in PNs table, please refer to GMA Series Specifications and Test Methods (1). In case "*" is added in PNs table, please refer to GMA Series Specifications and Test Methods (2). No. 1 Specifications Item Operating Temperature Range Test Method R7: Y55 to W125D Reference Temperature: 25D 2 Rated Voltage See the previous pages. The rated voltage is defined as the maximum voltage which may be applied continuously to the capacitor. When AC voltage is superimposed on DC voltage, VP-P or VO-P, whichever is larger, should be maintained within the rated voltage range. 3 Appearance No defects or abnormalities Visual inspection 4 Dimensions Within the specified dimensions Using calipers 5 Dielectric Strength No defects or abnormalities No failure should be observed when a voltage of 250% of the rated voltage is applied between the both terminations for 1 to 5 seconds, provided the charge/discharge current is less than 50mA. 6 Insulation Resistance More than 10,000M or 500F (Whichever is smaller) The insulation resistance should be measured with a DC voltage not exceeding the rated voltage at normal temperature and humidity and within 2 minutes of charging. 7 Capacitance Within the specified tolerance 8 Dissipation Factor (D.F.) R7: W.V.: 25V min.; 0.025 max. R7: W.V.: 16V/10V; 0.035 max. The capacitance/D.F. should be measured at reference temperature at the frequency and voltage shown in the table. Frequency Voltage 1T0.1kHz 1T0.2Vrms The capacitance change should be measured after 5min. at each specified temp. stage. #The ranges of capacitance change compared with the Reference Temperature value over the temperature ranges shown in the table should be within the specified ranges.* 9 Capacitance Temperature No bias Characteristics R7: Within W/-15% (-55 to W125C) Step 1 Temperature (C) 25T2 2 -55T3 3 25T2 4 125T3 *Initial measurement for high dielectric constant type Perform a heat treatment at 150 W0/Y10C for one hour and then let sit for 24T2 hours at room temperature. Perform the initial measurement. 10 Bond Strength Pull force: 0.03N min. MIL-STD-883 Method 2011 Condition D Mount the capacitor on a gold metallized alumina substrate with Au-Sn (80/20) and bond a 25m (0.001 inch) gold wire to the capacitor terminal using an ultrasonic ball bond. Then, pull wire. Die Shear Strength Die Shear force: 2N min. MIL-STD-883 Method 2019 Mount the capacitor on a gold metallized alumina substrate with Au-Sn (80/20). Apply the force parallel to the substrate. Appearance No defects or abnormalities Mechanical Strength Vibration Capacitance 11 Resistance D.F. Temperature 12 Cycle Within the specified tolerance R7: W.V.: 25V min.; 0.025 max. R7: W.V.: 16V/10V; 0.035 max. Appearance No defects or abnormalities Capacitance Change R7: Within T7.5% D.F. R7: W.V.: 25V min.; 0.025 max. R7: W.V.: 16V/10V; 0.035 max. I.R. More than 10,000M or 500 F (Whichever is smaller) Dielectric Strength No defects Ramp frequency from 10 to 55Hz then return to 10Hz all within 1 minute. Amplitude: 1.5 mm (0.06 inch) max. total excursion. Apply this motion for a period of 2 hours in each of 3 mutually perpendicular directions (total 6 hours). The capacitor should be set for 24T2 hours at room temperature after one hour heat of treatment at 150W0/Y10D, then measure for the initial measurement. Fix the capacitor to the supporting jig in the same manner and under the same conditions as (11) and conduct the five cycles according to the temperatures and time shown in the following table. Set it for 24T2 hours at room temperature, then measure. Step 1 2 3 4 Min. Operating Room Max. Operating Room Temp. (D) Temp. W0/Y3 Temp. Temp. W3/Y0 Temp. Time (min.) 30T3 2 to 3 30T3 2 to 3 Mounting for testing: The capacitors should be mounted on the substrate as shown below using die bonding and wire bonding when tests No.11 to 15 are performed. Continued on the following page. 123 7 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. GMA Series Specifications and Test Methods(1) Methods (1) Continued from the preceding page. No. 13 14 7 Specifications Item Appearance No defects or abnormalities Capacitance Change R7: Within T12.5% Humidity (Steady State) D.F. Humidity Load High 15 Temperature Load In case Non "*" is added in PNs table, please refer to GMA Series Specifications and Test Methods (1). In case "*" is added in PNs table, please refer to GMA Series Specifications and Test Methods (2). Test Method Set the capacitor for 500T12 hours at 40T2D, in 90 to 95% humidity. Take it out and set it for 24T2 hours at room temperature, then measure. R7: W.V.: 10V min.; 0.05 max. I.R. More than 1,000M or 50 F (Whichever is smaller) Appearance No defects or abnormalities Capacitance Change R7: Within T12.5% D.F. R7: W.V.: 10V min.; 0.05 max. I.R. More than 500M or 25 F (Whichever is smaller) Appearance No defects or abnormalities Capacitance Change R7: Within T12.5% D.F. R7: W.V.: 10V min.; 0.05 max. I.R. More than 1,000M or 50 F (Whichever is smaller) Apply the rated voltage for 500T12 hours at 40T2D, in 90 to 95% humidity and set it for 24T2 hours at room temperature,then measure. The charge/discharge current is less than 50mA. A voltage treatment should be given to the capacitor, in which a DC voltage of 200% the rated voltage is applied for one hour at the maximum operating temperature T3D then it should be set for 24T2 hours at room temperature and the initial measurement should be conducted. Then apply the above mentioned voltage continuously for 1000T12 hours at the same temperature, remove it from the bath, and set it for 24T2 hours at room temperature, then measure. The charge/discharge current is less than 50mA. Mounting for testing: The capacitors should be mounted on the substrate as shown below using die bonding and wire bonding when tests No.11 to 15 are performed. Capacitor Gold wire Die bond Gold land Alumina substrate Alumina substrate 124 Gold land PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. GMA Series Specifications and Test Methods (2) GMA Series Specifications and Test Methods(2) In case Non "*" is added in PNs table, please refer to GMA Series Specifications and Test Methods (1). In case "*" is added in PNs table, please refer to GMA Series Specifications and Test Methods (2). No. 1 Item Operating Temperature Range Specifications Test Method R6 : -55C to 85C Reference Temperature : 25C 2 Rated Voltage See the previous pages. The rated voltage is defined as the maximum voltage which may be applied continuously to the capacitor. When AC voltage is superimposed on DC voltage, VP-P or VO-P, whichever is larger, should be maintained within the rated voltage range. 3 Appearance No defects or abnormalities. Visual inspection. 4 Dimensions Within the specified dimensions. Using calipers. 5 Dielectric Strength No defects or abnormalities. No failure should be observed when 250% of the rated voltage is applied between the terminations for 1 to 5 seconds, provided the charge/discharge current is less than 50mA. 6 Insulation Resistance More than 50 * F The insulation resistance should be measured with a DC voltage not exceeding the rated voltage at normal temperature and humidity and within 1 minutes of charging. 7 Capacitance Within the specified tolerance. 8 Dissipation Factor (D.F.) R6 : 0.1 max. The capacitance/D.F. should be measured at reference temperature at the frequency and voltage shown in the table. Capacitance CV10F (6.3Vmax.) Frequency 10.1kHz Voltage 0.50.1Vrms The capacitance change should be measured after 5min. at each specified temp. stage. The ranges of capacitance change compared with the Reference Temperature value over the temperature ranges shown in the table should be within the specified ranges.* 9 Capacitance Temperature Characteristics No bias R6 : Within 15% (-55C to +85C) Step 1 2 3 4 Temperature (C) 252 -553 252 853 *Initial measurement for high dielectric constant type Perform a heat treatment at 150 +0/-10C for one hour and then let sit for 242 hours at room temperature. Perform the initial measurement. 10 Bond Pull force : 0.03N min. Strength MIL-STD-883 Method 2011 Condition D Mount the capacitor on a gold metallized alumina substrate with Au-Sn (80/20) and bond a 25m (0.001 inch) gold wire to the capacitor terminal using an ultrasonic ball bond. Then, pull wire. Die Shear Die Shear force : 2N min. Strength MIL-STD-883 Method 2019 Mount the capacitor on a gold metallized alumina substrate with Au-Sn (80/20). Apply the force parallel to the substrate. Mechanical Strength Appearance No defects or abnormalities. Vibration 11 Resistance Capacitance Within the specified tolerance. D.F. R6 : 0.1 max. Appearance No defects or abnormalities. Capacitance R6 : Within 7.5% Change D.F. Temperature I.R. 12 Sudden Change Dielectric Strength R6 : 0.1 max. More than 50 * F Ramp frequency from 10 to 55Hz then return to 10Hz all within 1 minute. Amplitude : 1.5 mm (0.06 inch) max. total excursion. Apply this motion for a period of 2 hours in each of 3 mutually perpendicular directions (total 6 hours). The capacitor should be set for 242 hours at room temperature after one hour heat of treatment at 150+0/-10C, then measure for the initial measurement. Fix the capacitor to the supporting jig in the same manner and under the same conditions as (11) and conduct the five cycles according to the temperatures and time shown in the following table. Set it for 484 hours at room temperature, then measure. Step No defects 1 Min. Temp. (C) Operating Temp.+0/-3 Time (min.) 303 2 Room Temp. 2 to 3 3 Max. Operating Temp. +3/-0 303 4 Room Temp. 2 to 3 Mounting for testing : The capacitors should be mounted on the substrate as shown below using die bonding and wire bonding when tests No.11 to 14 are performed. Continued on the following page. 125 7 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. GMA Series Specifications and Test Methods(2) Methods (2) Continued from the preceding page. No. Item In case Non "*" is added in PNs table, please refer to GMA Series Specifications and Test Methods (1). In case "*" is added in PNs table, please refer to GMA Series Specifications and Test Methods (2). Specifications Test Method Appearance No defects or abnormalities. Apply the rated voltage for 50012 hours at 402C, in 90 to 95% humidity and set it for 242 hours at room temperature, then measure. The charge/discharge current is less than 50mA. Capacitance R6 : Within 12.5% Change High Temperature 13 High Humidity (Steady) D.F. R6 : 0.2 max. * Initial measurement Perform a heat treatment at 150+0/-10C for one hour and then let sit for 242 hours at room temperature. Perform the initial measurement. I.R. More than 12.5 * F * Measurement after test Perform a heat treatment at 150+0/-10C for one hour and then let sit for 242 hours at room temperature, then measure. Appearance No defects or abnormalities. Apply 150% of the rated voltage for 100012 hours at the maximum operating temperature 3C. Let sit for 242 hours at room temperature, then measure. The charge/ discharge current is less than 50mA. Capacitance R6 : Within 12.5% Change D.F. 7 R6 : 0.2 max. * Initial measurement Perform a heat treatment at 150+0/-10C for one hour and then let sit for 242 hours at room temperature. Perform the initial measurement. 14 Durability I.R. More than 25 * F * Measurement after test Perform a heat treatment at 150+0/-10C for one hour and then let sit for 242 hours at room temperature, then measure. Mounting for testing : The capacitors should be mounted on the substrate as shown below using die bonding and wire bonding when tests No.11 to 14 are performed. Capacitor Gold wire Die bond Gold land Alumina substrate Alumina substrate 126 Gold land PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Chip Monolithic Ceramic Capacitors for Bonding GMD Series Features e 1. Small chip size (LxWxT: 0.6x0.3x0.3, 1.0x0.5x0.5mm) 2. Available for Wire/Die bonding due to Gold termination. 3. Suitable for Optical device for telecommunication, IC packaging built-in. Applications 1. Optical device for telecommunication 2. IC, IC packaging built-in g e T Outer electrode: Au L Part Number GMD033 GMD155 L 0.60.03 1.00.05 W Dimensions (mm) W T e g min. 0.30.03 0.30.03 0.12 to 0.22 0.16 0.50.05 0.50.05 0.15 to 0.35 0.3 8 127 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Capacitance Table High Dielectric Constant Type X7R(R7)/X5R(R6) Characteristics 3 ex.3: T Dimension [mm] 0.6x0.3 (03) <0201> LxW [mm] Rated Voltage [Vdc] Capacitance 8 25 (1E) 16 (1C) 1.0x0.5 (15) <0402> 10 (1A) 50 (1H) 16 (1C) 6.3 (0J) X7R (R7) TC 1.0x0.5 (15) <0402> 10 (1A) 100pF(101) 3 120pF(121) 3 150pF(151) 3 180pF(181) 3 220pF(221) 3 5 270pF(271) 3 5 330pF(331) 3 5 390pF(391) 3 5 470pF(471) 3 5 560pF(561) 3 5 680pF(681) 3 5 820pF(821) 3 5 1000pF(102) 3 5 1200pF(122) 3 5 1500pF(152) 3 5 1800pF(182) 3 5 2200pF(222) 3 5 2700pF(272) 3 5 3300pF(332) 3 5 3900pF(392) 3 5 4700pF(472) 3 5 5600pF(562) 3 5 6800pF(682) 3 5 8200pF(822) 3 5 10000pF(103) 3 5 12000pF(123) 5 15000pF(153) 5 18000pF(183) 5 22000pF(223) 5 27000pF(273) 5 33000pF(333) 5 39000pF(393) 5 47000pF(473) 5 56000pF(563) 5 3 68000pF(683) 5 3 82000pF(823) 5 3 0.10F(104) 5 3 0.12F(124) 5 0.15F(154) 5 0.18F(184) 5 0.22F(224) 5 0.27F(274) 5 0.33F(334) 5 0.39F(394) 5 0.47F(474) 5 The part number code is shown in ( ) and Unit is shown in [ ]. 6.3 (0J) X5R (R6) 1.0F(105) 128 25 (1E) 0.6x0.3 (03) <0201> 5 < >: EIA [inch] Code PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. High Dielectric Constant Type X7R(R7) Characteristics 0.6x0.3(03)<0201> LxW [mm] 25(1E) Rated Volt. [Vdc] Capacitance 16(1C) Tolerance 10(1A) Part Number 100pF(101) 10%(K) GMD033R71E101KA01D 120pF(121) 10%(K) GMD033R71E121KA01D 150pF(151) 10%(K) GMD033R71E151KA01D 180pF(181) 10%(K) GMD033R71E181KA01D 220pF(221) 10%(K) GMD033R71E221KA01D 270pF(271) 10%(K) GMD033R71E271KA01D 330pF(331) 10%(K) GMD033R71E331KA01D 390pF(391) 10%(K) GMD033R71E391KA01D 470pF(471) 10%(K) GMD033R71E471KA01D 560pF(561) 10%(K) GMD033R71E561KA01D 680pF(681) 10%(K) GMD033R71E681KA01D 820pF(821) 10%(K) GMD033R71E821KA01D 1000pF(102) 10%(K) GMD033R71E102KA01D 1200pF(122) 10%(K) GMD033R71E122KA01D 1500pF(152) 10%(K) GMD033R71E152KA01D 1800pF(182) 10%(K) GMD033R71C182KA11D 2200pF(222) 10%(K) GMD033R71C222KA11D 2700pF(272) 10%(K) GMD033R71C272KA11D 3300pF(332) 10%(K) GMD033R71C332KA11D 3900pF(392) 10%(K) GMD033R71A392KA01D 4700pF(472) 10%(K) GMD033R71A472KA01D 5600pF(562) 10%(K) GMD033R71A562KA01D 6800pF(682) 10%(K) GMD033R71A682KA01D 8200pF(822) 10%(K) GMD033R71A822KA01D 10000pF(103) 10%(K) GMD033R71A103KA01D The part number code is shown in ( ) and Unit is shown in [ ]. 8 < >: EIA [inch] Code 129 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. High Dielectric Constant Type X7R(R7) Characteristics 1.0x0.5(15)<0402> LxW [mm] 50(1H) Rated Volt. [Vdc] Capacitance 25(1E) Tolerance 16(1C) Part Number 220pF(221) 10%(K) GMD155R71H221KA01D 270pF(271) 10%(K) GMD155R71H271KA01D 330pF(331) 10%(K) GMD155R71H331KA01D 390pF(391) 10%(K) GMD155R71H391KA01D 470pF(471) 10%(K) GMD155R71H471KA01D 560pF(561) 10%(K) GMD155R71H561KA01D 680pF(681) 10%(K) GMD155R71H681KA01D 820pF(821) 10%(K) GMD155R71H821KA01D 1000pF(102) 10%(K) GMD155R71H102KA01D 1200pF(122) 10%(K) GMD155R71H122KA01D 1500pF(152) 10%(K) GMD155R71H152KA01D 1800pF(182) 10%(K) GMD155R71H182KA01D 2200pF(222) 10%(K) GMD155R71H222KA01D 2700pF(272) 10%(K) GMD155R71H272KA01D 3300pF(332) 10%(K) GMD155R71H332KA01D 3900pF(392) 10%(K) GMD155R71H392KA01D 4700pF(472) 10%(K) GMD155R71H472KA01D 5600pF(562) 10%(K) GMD155R71E562KA01D 6800pF(682) 10%(K) GMD155R71E682KA01D 8200pF(822) 10%(K) GMD155R71E822KA01D 10000pF(103) 10%(K) GMD155R71E103KA01D 12000pF(123) 10%(K) GMD155R71E123KA01D 15000pF(153) 10%(K) GMD155R71E153KA01D 18000pF(183) 10%(K) GMD155R71E183KA01D 22000pF(223) 10%(K) GMD155R71E223KA01D 27000pF(273) 10%(K) GMD155R71E273KA11D 33000pF(333) 10%(K) GMD155R71E333KA11D 39000pF(393) 10%(K) GMD155R71E393KA11D 47000pF(473) 10%(K) GMD155R71E473KA11D 56000pF(563) 10%(K) GMD155R71C563KA11D 68000pF(683) 10%(K) GMD155R71C683KA11D 82000pF(823) 10%(K) GMD155R71C823KA11D 0.10F(104) 10%(K) 8 GMD155R71C104KA11D The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code qProduct ID wSeries tTemperature Characteristics u i o !0 iCapacitance Tolerance q w e r t y Packaging Code in Part Number is a code shows STD 180mm Reel Taping. (Part Number) GM 130 D 15 5 R7 1H 221 K A01 D eDimension (LxW) yRated Voltage oIndividual Specification Code rDimension (T) uCapacitance !0Packaging PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. High Dielectric Constant Type X5R(R6) Characteristics 0.6x0.3(03)<0201> LxW [mm] 6.3(0J) Rated Volt. [Vdc] Capacitance Tolerance 1.0x0.5(15)<0402> 10(1A) 6.3(0J) Part Number 56000pF(563) 10%(K) GMD033R60J563KE11D* 68000pF(683) 10%(K) GMD033R60J683KE11D* 82000pF(823) 10%(K) GMD033R60J823KE11D* 0.10F(104) 10%(K) GMD033R60J104KE11D* 0.12F(124) 10%(K) GMD155R61A124KE12D* 0.15F(154) 10%(K) GMD155R61A154KE12D* 0.18F(184) 10%(K) GMD155R61A184KE12D* 0.22F(224) 10%(K) GMD155R61A224KE12D* 0.27F(274) 10%(K) GMD155R61A274KE11D* 0.33F(334) 10%(K) GMD155R61A334KE11D* 0.39F(394) 10%(K) GMD155R61A394KE11D* 0.47F(474) 10%(K) GMD155R61A474KE11D* 1.0F(105) 10%(K) GMD155R60J105KE11D* The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code *: Please refer to GMD series Specifications and Test Method(2). 8 131 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. GMD Series Specifications and Test Methods (1) In case Non "*" is added in PNs table, please refer to GMD Series Specifications and Test Methods (1). In case "*" is added in PNs table, please refer to GMD Series Specifications and Test Methods (2). No. 1 Item Operating Temperature Range Specifications Test Method R7 : -55C to 125C Reference Temperature : 25C 2 Rated Voltage See the previous pages. The rated voltage is defined as the maximum voltage which may be applied continuously to the capacitor. When AC voltage is superimposed on DC voltage, VP-P or VO-P, whichever is larger, should be maintained within the rated voltage range. 3 Appearance No defects or abnormalities. Visual inspection. 4 Dimensions Within the specified dimensions. Using calipers. 5 Dielectric Strength No defects or abnormality. No failure should be observed when 250% of the rated voltage is applied between the terminations for 1 to 5 seconds, provided the charge/discharge current is less than 50mA. 6 Insulation Resistance More than 10,000M or 500 * F (Whichever is smaller) The insulation resistance should be measured with a DC voltage not exceeding the rated voltage at normal temperature and humidity and within 2 minutes of charging. 7 Capacitance Within the specified tolerance. 8 Dissipation Factor (D.F.) R7 : W.V. 25Vmin. : 0.025 max. W.V. 16/10V : 0.035 max. 8 The capacitance/D.F. should be measured at reference temperature at the frequency and voltage shown in the table. Frequency Voltage 10.1kHz 10.2Vrms The capacitance change should be measured after 5min. at each specified temp. stage. The ranges of capacitance change compared with the Reference Temperature value over the temperature ranges shown in the table should be within the specified ranges.* 9 Capacitance Temperature Characteristics No bias R7 : Within 15% (-55C to +125C) Step 1 2 3 4 Temperature (C) 252 -553 252 1253 *Initial measurement for high dielectric constant type Perform a heat treatment at 150 +0/-10C for one hour and then let sit for 242 hours at room temperature. Perform the initial measurement. 10 Bond Pull force : 0.03N min. Strength MIL-STD-883 Method 2011 Condition D Mount the capacitor on a gold metallized alumina substrate with Au-Sn (80/20) and bond a 25mm (0.001 inch) gold wire to the capacitor terminal using an ultrasonic ball bond. Then, pull wire. Die Shear Die Shear force : 2N min. Strength MIL-STD-883 Method 2019 Mount the capacitor on a gold metallized alumina substrate with Au-Sn (80/20). Apply the force parallel to the substrate. Mechanical Strength Appearance No defects or abnormalities. Vibration 11 Resistance Capacitance Within the specified tolerance. D.F. R7 : W.V. 25Vmin. : 0.025 max. W.V. 16/10V : 0.035 max. Appearance No defects or abnormalities. Capacitance R7 : Within 7.5% Change 12 Temperature Cycle D.F. R7 : W.V. 25Vmin. : 0.025 max. W.V. 16/10V : 0.035 max. I.R. More than 10,000M or 500 * F (Whichever is smaller) Dielectric Strength No defects Ramp frequency from 10 to 55Hz then return to 10Hz all within 1 minute. Amplitude : 1.5 mm (0.06 inch) max. total excursion. Apply this motion for a period of 2 hours in each of 3 mutually perpendicular directions (total 6 hours). The capacitor should be set for 242 hours at room temperature after one hour heat of treatment at 150+0/-10C, then measure for the initial measurement. Fix the capacitor to the supporting jig in the same manner and under the same conditions as (11) and conduct the five cycles according to the temperatures and time shown in the following table. Set it for 242 hours at room temperature, then measure. Step 1 Min. Temp. (C) Operating Temp.+0/-3 Time (min.) 30+/-3 2 Room Temp. 2 to 3 3 Max. Operating Temp. +3/-0 30+/-3 4 Room Temp. 2 to 3 Mounting for testing : The capacitors should be mounted on the substrate as shown below using die bonding. when tests No.11 to 15 are performed. Continued on the following page. 132 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. GMD Series Specifications and Test Methods (1) GMD Series Specifications and Test Methods (1) Continued from the preceding page. No. Item In case Non "*" is added in PNs table, please refer to GMD Series Specifications and Test Methods (1). In case "*" is added in PNs table, please refer to GMD Series Specifications and Test Methods (2). Specifications Test Method Appearance No defects or abnormalities. Capacitance R7 : Within 12.5% Change 13 Humidity (Steady State) D.F. I.R. Set the capacitor for 50012 hours at 402C, in 90 to 95% humidity. Take it out and set it for 242 hours at room temperature, then measure. R7 : W.V. 25Vmin. : 0.05 max. W.V. 16/10V : 0.05 max. More than 1,000M or 50 * F (Whichever is smaller) Appearance No defects or abnormalities. Capacitance R7 : Within 12.5% Change 14 Humidity Load D.F. I.R. Apply the rated voltage for 50012 hours at 402C, in 90 to 95% humidity and set it for 242 hours at room temperature, then measure. The charge/discharge current is less than 50mA. R7 : W.V. 25Vmin. : 0.05 max. W.V. 16/10V : 0.05 max. More than 500M or 25 * F (Whichever is smaller) Appearance No defects or abnormalities. A voltage treatment should be given to the capacitor, in which a DC voltage of 200% the rated voltage is applied for one hour at the maximum operating temperature 3C then it should be set for 242 hours at room temperature and the initial measurement should be conducted. Then apply the above mentioned voltage continuously for 100012 hours at the same temperature, remove it from the bath, and set it for 242 hours at room temperature, then measure. The charge/discharge current is less than 50mA. Capacitance R7 : Within 12.5% Change High 15 Temperature D.F. Load I.R. R7 : W.V. 25Vmin. : 0.05 max. W.V. 16/10V : 0.05 max. More than 1,000M or 50 * F (Whichever is smaller) Mounting for testing : The capacitors should be mounted on the substrate as shown below using die bonding. when tests No.11 to 15 are performed. Gold wire Die bond Gold wire Capacitor Alumina substrate Gold land Alumina substrate Gold land 133 8 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. GMD Series Specifications and Test Methods (2) In case Non "*" is added in PNs table, please refer to GMD Series Specifications and Test Methods (1). In case "*" is added in PNs table, please refer to GMD Series Specifications and Test Methods (2). No. 1 8 Item Operating Temperature Range Specifications Test Method R6 : -55C to 85C Reference Temperature : 25C 2 Rated Voltage See the previous pages. The rated voltage is defined as the maximum voltage which may be applied continuously to the capacitor. When AC voltage is superimposed on DC voltage, VP-P or VO-P, whichever is larger, should be maintained within the rated voltage range. 3 Appearance No defects or abnormalities. Visual inspection. 4 Dimensions Within the specified dimensions. Using calipers. 5 Dielectric Strength No defects or abnormalities. No failure should be observed when 250% of the rated voltage is applied between the terminations for 1 to 5 seconds, provided the charge/discharge current is less than 50mA. 6 Insulation Resistance More than 50 * F The insulation resistance should be measured with a DC voltage not exceeding the rated voltage at normal temperature and humidity and within 1 minutes of charging. 7 Capacitance Within the specified tolerance. 8 Dissipation Factor (D.F.) R6 : 0.1 max. The capacitance/D.F. should be measured at reference temperature at the frequency and voltage shown in the table. Capacitance CV10F (10Vmin.)*1 CV10F (6.3Vmax.) Frequency 10.1kHz 10.1kHz Voltage 1.00.2Vrms 0.50.1Vrms *1 GMD155 R6 1A 124 to 224 are applied to 0.50.1 Vrms. The capacitance change should be measured after 5min. at each specified temp. stage. The ranges of capacitance change compared with the Reference Temperature value over the temperature ranges shown in the table should be within the specified ranges.* 9 Capacitance Temperature Characteristics No bias R6 : Within 15% (-55C to +85C) Step 1 2 3 4 Temperature (C) 252 -553 252 853 *Initial measurement for high dielectric constant type Perform a heat treatment at 150 +0/-10C for one hour and then let sit for 242 hours at room temperature. Perform the initial measurement. 10 Bond Pull force : 0.03N min. Strength MIL-STD-883 Method 2011 Condition D Mount the capacitor on a gold metallized alumina substrate with Au-Sn (80/20) and bond a 25m (0.001 inch) gold wire to the capacitor terminal using an ultrasonic ball bond. Then, pull wire. Die Shear Die Shear force : 2N min. Strength MIL-STD-883 Method 2019 Mount the capacitor on a gold metallized alumina substrate with Au-Sn (80/20). Apply the force parallel to the substrate. Mechanical Strength Appearance No defects or abnormalities. Vibration 11 Resistance Capacitance Within the specified tolerance. D.F. R6 : 0.1 max. Appearance No defects or abnormalities. Capacitance R6 : Within 7.5% Change D.F. Temperature I.R. 12 Sudden Change Dielectric Strength R6 : 0.1 max. More than 50 * F Ramp frequency from 10 to 55Hz then return to 10Hz all within 1 minute. Amplitude : 1.5 mm (0.06 inch) max. total excursion. Apply this motion for a period of 2 hours in each of 3 mutually perpendicular directions (total 6 hours). The capacitor should be set for 242 hours at room temperature after one hour heat of treatment at 150+0/-10C, then measure for the initial measurement. Fix the capacitor to the supporting jig in the same manner and under the same conditions as (11) and conduct the five cycles according to the temperatures and time shown in the following table. Set it for 242 hours at room temperature, then measure. Step No defects 1 Min. Temp. (C) Operating Temp.+0/-3 Time (min.) 303 2 Room Temp. 2 to 3 3 Max. Operating Temp. +3/-0 303 4 Room Temp. 2 to 3 Mounting for testing : The capacitors should be mounted on the substrate as shown below using die bonding. when tests No.11 to 14 are performed. Continued on the following page. 134 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. GMD Series Specifications and Test Methods (2) GMD Series Specifications and Test Methods (2) Continued from the preceding page. No. Item In case Non "*" is added in PNs table, please refer to GMD Series Specifications and Test Methods (1). In case "*" is added in PNs table, please refer to GMD Series Specifications and Test Methods (2). Specifications Test Method Appearance No defects or abnormalities. Apply the rated voltage for 50012 hours at 402C, in 90 to 95% humidity and set it for 242 hours at room temperature, then measure. The charge/discharge current is less than 50mA. Capacitance R6 : Within 12.5% Change High Temperature 13 High Humidity (Steady) D.F. R6 : 0.2 max. * Initial measurement Perform a heat treatment at 150+0/-10C for one hour and then let sit for 242 hours at room temperature. Perform the initial measurement. I.R. More than 12.5 * F * Measurement after test Perform a heat treatment at 150+0/-10C for one hour and then let sit for 242 hours at room temperature, then measure. Apply 150%*2 of the rated voltage for 100012 hours at the maximum operating temperature 3C. Let sit for 242 hours at room temperature, then measure. The charge/ discharge current is less than 50mA. Appearance No defects or abnormalities. Capacitance R6 : Within 12.5% Change D.F. R6 : 0.2 max. *2 GMD155 R6 1A 274 to 474 are applied to 120%. * Initial measurement Perform a heat treatment at 150+0/-10C for one hour and then let sit for 242 hours at room temperature. Perform the initial measurement. 14 Durability I.R. More than 25 * F * Measurement after test Perform a heat treatment at 150+0/-10C for one hour and then let sit for 242 hours at room temperature, then measure. Mounting for testing : The capacitors should be mounted on the substrate as shown below using die bonding. when tests No.11 to 14 are performed. Gold wire Die bond Gold wire Capacitor Alumina substrate Gold land Alumina substrate Gold land 135 8 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Package Minimum Quantity Guide Part Number Dimensions (mm) L W T Packaging Code GRM02 GRM03 0.4 0.6 0.2 0.3 GRM15 1.0 0.5 GRM18 1.6 0.8 GRM21 2.0 1.25 GRM31 3.2 1.6 GRM32 3.2 2.5 For General Purpose 0.2 0.3 0.25/0.3 0.5 0.5 0.8 0.6 0.85 1.0/1.25 0.6/0.85 1.15 1.6 0.85 1.15 1.35 1.6 1.8/2.0 2.5 8 1.15 High Power Type High Frequency Microchip Array Low ESL 1) 2) 3) 4) GRM43 4.5 3.2 GRM55 5.7 5.0 GJM03 GJM15 GQM18 GQM21 ERB18 ERB21 ERB32 GMA0D GMA05 GMA08 GMD03 GMD15 GNM0M GNM1M GNM21 0.6 1.0 1.6 2.0 1.6 2.0 3.2 0.38 0.5 0.8 0.6 1.0 0.9 1.37 2.0 0.3 0.5 0.8 1.25 0.8 1.25 2.5 0.38 0.5 0.8 0.3 0.5 0.6 1.0 1.25 GNM31 3.2 1.6 LLL15 LLL18 0.5 0.8 1.0 1.6 LLL21 1.25 2.0 LLL31 1.6 3.2 LLA18 1.6 0.8 LLA21 2.0 1.25 LLA31 3.2 1.6 LLM21 LLM31 2.0 3.2 1.25 1.6 1.35/1.6 1.8/2.0 2.5 2.8 1.15 1.35/1.6 1.8/2.0 2.5 3.2 0.3 0.5 0.7/0.8 0.85 0.9 max. 1.35 max. 1.7 max. 0.3 0.35 0.5 0.3 0.5 0.45 0.5/0.6/0.8 0.5/0.6/0.85 0.8/0.85 1.0/1.15 0.3 0.5 0.5/0.6 0.85 0.5/0.7 1.15 0.5 0.5 0.85 0.5 0.85 1.15 0.5 0.5 o180mm Reel Paper Tape Embossed Tape Quantity (pcs.) o330mm Reel Paper Tape Embossed Tape Bulk Case D L J K C 20,000 1) 15,000 10,000 10,000 4,000 4,000 4,000 4,000 4,000 4,000 15,000 10,000 4,000 4,000 4,000 15,000 10,000 10,000 4,000 4,000 4,000 10,000 4) - 40,000 1) 3,000 3,000 2,000 3,000 2,000 2,000 1,000 1,000 1,000 500 500 1,000 1,000 500 300 3,000 2,000 3,000 4,000 4,000 3,000 4,000 3,000 4,000 4,000 3,000 4,000 3,000 3,000 4,000 4,000 50,000 50,000 50,000 10,000 10,000 10,000 10,000 10,000 10,000 50,000 50,000 10,000 10,000 10,000 50,000 50,000 50,000 10,000 10,000 10,000 50,000 4) - 10,000 10,000 6,000 10,000 8,000 6,000 4,000 5,000 4,000 2,000 1,500 5,000 4,000 2,000 1,500 10,000 8,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 50,000 15,000 2) 10,000 5,000 2) 50,000 - Bulk Bag Bulk : B Tray : T 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 500 1,000 1,000 500 500 1,000 1,000 1,000 1,000 1,000 1,000 1,000 400 3) 400 3) 400 3) 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 8mm width 2mm pitch Paper Taping. 4mm width 1mm pitch Embossed Taping. There are parts number without bulk case. Tray LLL15: o180mm Reel Paper Taping Packaging Code: E, o330mm Reel Paper Taping Packaging Code: F Continued on the following page. 136 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Package Continued from the preceding page. Tape Carrier Packaging (1) Dimensions of Reel o180mm Reel o330mm Reel 2.00.5 2.00.5 o3282.0 o50 min. o50 min. o21.00.8 o1782.0 o13.00.5 o13.00.5 o21.00.8 51.5 for 4mm wide tape 101.5 for 8mm wide tape 141.5 for 12mm wide tape 101.5 for 8mm wide tape 141.5 for 12mm wide tape (in mm) 8 (2) Dimensions of Paper Tape 8mm width 2mm pitch Tape 4.00.1 4.00.1 8.00.3 B A A A B GRM18 GQM18 ERB18 1.050.1 1.850.1 GNM1M 1.170.05 1.550.05 GRM21 (TV0.85mm) GQM21 GNM21 1.550.15 1.750.1 Direction of Feed Direction of Feed Part Number 2.00.1 +0.1 o1.5 -0 3.50.05 1.1 max. 1.750.1 2.00.05 B 2.00.1 3.50.05 4.00.1 +0.1 o1.5- 0 0.4 max. (GRM02) 0.5 max. (GJM03/GRM03/GMD03) 0.8 max. (GJM15/GRM15/GMD15 LLL15/GNM0M) 8.00.3 8mm width 4mm pitch Tape 2.30.15 GRM31 (TV0.85mm) GNM31 (TV0.8mm) 2.00.2 3.60.2 GRM32 (TV0.85mm) 2.80.2 3.60.2 A* B* GRM02 Part Number 0.25 0.45 GJM03 GRM03 GMD03 0.37 0.67 GJM15 GRM15 GMD15 LLL15 0.65 1.15 GNM0M 0.72 1.02 *Nominal Value (in mm) Continued on the following page. 137 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Package Continued from the preceding page. (3) Dimensions of Embossed Tape 4mm width 1mm pitch Tape A 0.5 max. Part Number GRM02 A* B* 0.23 0.43 Direction of feed 2.5 max. (3.0 max. for T=1.8/2.0mm) (3.7 max. for TU2.5mm) Part Number A B *GRM03 is also available by 4mm width 1mm pitch Tape. LLL18, LLA18 1.050.1 1.850.1 12mm width 8mm pitch Tape GRM21 (TU1.0mm) LLL21 LLA21, LLM21 1.450.2 2.250.2 ERB21 1.550.2 2.30.2 GRM31 (TU1.15mm) LLL31 LLA31, LLM31 GNM31 (TU1.0mm) 1.90.2 3.50.2 GRM32, ERB32 (TU1.0mm) 2.80.2 3.50.2 *Nominal Value +0.1 o1.5 -0 1.750.1 5.50.1 8.00.1 2.00.1 4.00.1 B A Direction of feed Part Number 0.30.1 12.00.3 8 1.750.1 3.50.05 1.80.02 B A 2.00.1 4.00.1 o1.5 -0 8.00.3 +0.1 0.15 to 0.4 B 1.00.02 o0.80.04 0.20.1 (LLp) 0.250.1 (TV2.0mm) 0.30.1 (T=2.5mm) 4.00.1 4.00.05 1.00.02 8mm width 4mm pitch Tape 0.90.05 2.00.04 2.5 max. for GRM43/55 (3.7 max. for T=2.5mm) (4.7 max. for TU3.0mm) A* B* GRM43 3.6 4.9 GRM55 5.2 6.1 *Nominal Value (4) Taping Method q Tapes for capacitors are wound clockwise. The sprocket holes are to the right as the tape is pulled toward the user. w Part of the leader and part of the empty tape should be attached to the end of the tape as follows. e The top tape and base tape are not attached at the end of the tape for a minimum of 5 pitches. r Missing capacitors number within 0.1% of the number per reel or 1 pc, whichever is greater, and are not continuous. t The top tape and bottom tape should not protrude beyond the edges of the tape and should not cover sprocket holes. y Cumulative tolerance of sprocket holes, 10 pitches: 0.3mm. u Peeling off force: 0.1 to 0.6N* in the direction shown below. *GRM02 GRM03 : 0.05 to 0.5N GJM03 GMD03 } (in mm) Vacant Section Chip-mounting Unit Vacant Section Leader unit 160 min. 190 min. Direction of Feed 210 min. (Top Tape alone) (in mm) 165 to 180 Top Tape Base Tape Continued on the following page. 138 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Package Continued from the preceding page. Dimensions of Bulk Case Packaging 6.8 8.8 12.0 The bulk case uses antistatic materials. Please contact Murata for details. 31.5 36.0 1.5 2.0 3.0 110 (in mm) 8 139 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. !Caution Storage and Operation condition 1. The performance of chip monolithic ceramic capacitors may be affected by the storage conditions. 1-1. Store capacitors in the following conditions: Temperature of +5C to +40C and a Relative Humidity of 20% to 70%. (1) Sunlight, dust, rapid temperature changes, corrosive gas atmosphere or high temperature and humidity conditions during storage may affect the solderability and the packaging performance. Please use product within six months of receipt. (2) Please confirm solderability before using after six months. Store the capacitors without opening the original bag. Even if the storage period is short, do not exceed the specified atmospheric conditions. 8 140 1-2. Corrosive gas can react with the termination (external) electrodes or lead wires of capacitors, and result in poor solderability. Do not store the capacitors in an atmosphere consisting of corrosive gas (e.g., hydrogen sulfide, sulfur dioxide, chlorine, ammonia gas, etc.). 1-3. Due to moisture condensation caused by rapid humidity changes, or the photochemical change caused by direct sunlight on the terminal electrodes and/or the resin/epoxy coatings, the solderability and electrical performance may deteriorate. Do not store capacitors under direct sunlight or in high humidity conditions. PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. !Caution !Caution Rating 1. Temperature Dependent Characteristics 1. The electrical characteristics of the capacitor can change with temperature. 1-1. For capacitors having larger temperature dependency, the capacitance may change with temperature changes. The following actions are recommended in order to insure suitable capacitance values. (1) Select a suitable capacitance for the operating temperature range. Typical Temperature Characteristics Char. R7(X7R) Typical Temperature Characteristics Char. R6(X5R) 20 20 15 15 Capacitance Change (%) Capacitance Change (%) (2) The capacitance may change within the rated temperature. When you use a high dielectric constant type capacitors in a circuit that needs a tight (narrow) capacitance tolerance. Example: a time constant circuit., please carefully consider the characteristics of these capacitors, such as their aging, voltage, and temperature characteristics. And check capacitors using your actual appliances at the intended environment and operating conditions. 10 5 0 -5 -10 -15 -20 -75 -50 -25 0 25 50 75 100 Temperature (C) 10 8 5 0 -5 -10 -15 -20 -75 -50 -25 0 25 50 75 100 125 150 Temperature (C) Typical Temperature Characteristics Char. F5(Y5V) Capacitance Change (%) 40 20 0 -20 -40 -60 -80 -100 -50 -25 0 25 50 75 100 Temperature (C) 2. Measurement of Capacitance 1. Measure capacitance with the voltage and the frequency specified in the product specifications. 1-1. The output voltage of the measuring equipment may decrease when capacitance is high occasionally. Please confirm whether a prescribed measured voltage is impressed to the capacitor. 1-2. The capacitance values of high dielectric constant type capacitors change depending on the AC voltage applied. Please consider the AC voltage characteristics when selecting a capacitor to be used in a AC circuit. Continued on the following page. 141 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. !Caution Continued from the preceding page. 3. Applied Voltage 1. Do not apply a voltage to the capacitor that exceeds the rated voltage as called-out in the specifications. 1-1. Applied voltage between the terminals of a capacitor shall be less than or equal to the rated voltage. (1) When AC voltage is superimposed on DC voltage, the zero-to-peak voltage shall not exceed the rated DC voltage. When AC voltage or pulse voltage is applied, the peak-to-peak voltage shall not exceed the rated DC voltage. (2) Abnormal voltages (surge voltage, static electricity, pulse voltage, etc.) shall not exceed the rated DC voltage. Typical Voltage Applied to the DC Capacitor DC Voltage 8 E DC Voltage+AC E AC Voltage E Pulse Voltage 0 E 0 0 0 (E: Maximum possible applied voltage.) 1-2. Influence of overvoltage Overvoltage that is applied to the capacitor may result in an electrical short circuit caused by the breakdown of the internal dielectric layers . The time duration until breakdown depends on the applied voltage and the ambient temperature. 4. Applied Voltage and Self-heating Temperature 1. When the capacitor is used in a high-frequency voltage, pulse voltage, application, be sure to take into account self-heating may be caused by resistant factors of the capacitor. 1-1. The load should be contained to the level such that when measuring at atomospheric temperature of 25C, the product's self-heating remains below 20C and surface temperature of the capacitor in the actual circuit remains wiyhin the maximum operating temperature. Continued on the following page. 142 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. !Caution !Caution Continued from the preceding page. [DC Voltage Characteristics] Capacitance Change (%) 20 0 -20 -40 -60 -80 -100 0 1 2 3 4 5 6 7 DC Voltage (VDC) 8 [AC Voltage Characteristics] 30 Capacitance Change (%) 5. DC Voltage and AC Voltage Characteristic 1. The capacitance value of a high dielectric constant type capacitor changes depending on the DC voltage applied. Please consider the DC voltage characteristics when a capacitor is selected for use in a DC circuit. 1-1. The capacitance of ceramic capacitors may change sharply depending on the applied voltage. (See figure) Please confirm the following in order to secure the capacitance. (1) Whether the capacitance change caused by the applied voltage is within the range allowed or not. (2) In the DC voltage characteristics, the rate of capacitance change becomes larger as voltage increases. Even if the applied voltage is below the rated voltage. When a high dielectric constant type capacitor is in a circuit that needs a tight (narrow) capacitance tolerance. Example: a time constant circuit., please carefully consider the characteristics of these capacitors, such as their aging, voltage, and temperature characteristics. And check capacitors using your actual appliances at the intended environment and operating conditions. 2. The capacitance values of high dielectric constant type capacitors change depending on the AC voltage applied. Please consider the AC voltage characteristics when selecting a capacitor to be used in a AC circuit. 20 10 0 -10 -20 -30 -40 -50 -60 0.0 0.5 1.0 1.5 2.0 2.5 AC Voltage (Vr.m.s.) 20 Capacitor Change (%) 6. Capacitance Aging 1. The high dielectric constant type capacitors have the characteristic in which the capacitance value decreases with passage of time. When you use a high dielectric constant type capacitors in a circuit that needs a tight (narrow) capacitance tolerance. Example: a time constant circuit., please carefully consider the characteristics of these capacitors, such as their aging, voltage, and temperature characteristics. And check capacitors using your actual appliances at the intended environment and operating conditions. 10 0 -10 -20 5C -30 R -40 10 100 1000 10000 Time (Hr) Continued on the following page. 143 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. !Caution Continued from the preceding page. 7. Vibration and Shock 1. The capacitors mechanical actress (vibration and shock) shall be specified for the use environment. Please confirm the kind of vibration and/or shock, its condition, and any generation of resonance. Please mount the capacitor so as not to generate resonance, and do not allow any impact on the terminals. 2. Mechanical shock due to falling may cause damage or a crack in the dielectric material of the capacitor. Do not use a fallen capacitor because the quality and reliability may be deteriorated. 3. When printed circuit boards are piled up or handled, the corners of another printed circuit board should not be allowed to hit the capacitor in order to avoid a crack or other damage to the capacitor. 8 144 Crack Floor Mounting printed circuit board Crack PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. !Caution !Caution Soldering and Mounting 1. Mounting Position 1. Confirm the best mounting position and direction that minimizes the stress imposed on the capacitor during flexing or bending the printed circuit board. 1-1. Choose a mounting position that minimizes the stress imposed on the chip during flexing or bending of the board. [Component Direction] Locate chip horizontal to the direction in which stress acts. [Chip Mounting Close to Board Separation Point] Perforation A C Chip arrangement Worst A-C-(B~D) Best B D Slit 2. Information before Mounting 1. Do not re-use capacitors that were removed from the equipment. 2. Confirm capacitance characteristics under actual applied voltage. 3. Confirm the mechanical stress under actual process and equipment use. 4. Confirm the rated capacitance, rated voltage and other electrical characteristics before assembly. 5. Prior to use, confirm the Solderability for the capacitors that were in long-term storage. 6. Prior to measuring capacitance, carry out a heat treatment for capacitors that were in long-term storage. 7. The use of Sn-Zn based solder will deteriorate the reliability of the MLCC. Please contact our sales representative or product engineers on the use of Sn-Zn based solder in advance. 3. Maintenance of the Mounting (pick and place) Machine 1. Make sure that the following excessive forces are not applied to the capacitors. 1-1. In mounting the capacitors on the printed circuit board, any bending force against them shall be kept to a minimum to prevent them from any bending damage or cracking. Please take into account the following precautions and recommendations for use in your process. (1) Adjust the lowest position of the pickup nozzle so as not to bend the printed circuit board. (2) Adjust the nozzle pressure within a static load of 1N to 3N during mounting. 2. Dirt particles and dust accumulated between the suction nozzle and the cylinder inner wall prevent the nozzle from moving smoothly. This imposes greater force upon the chip during mounting, causing cracked chips. Also the locating claw, when worn out, imposes uneven forces on the chip when positioning, causing cracked chips. The suction nozzle and the locating claw must be maintained, checked and replaced periodically. [Incorrect] Suction Nozzle Deflection Board Board Guide [Correct] Support Pin Continued on the following page. 145 8 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. !Caution Continued from the preceding page. 4-1. Reflow Soldering [Standard Conditions for Reflow Soldering] ,,, ,,, ,,, ,,, ,,, ,,, ,,, ,,, ,,, Infrared Reflow Temperature (D) Soldering Peak Temperature Gradual Cooling 200C T 170C 150C 130C Preheating Time 60-120 seconds 30-60 seconds Vapor Reflow Temperature (D) Soldering Peak Temperature Gradual Cooling T 170C 150C 130C Table 1 Part Number Temperature Differential Preheating GRM02/03/15/18/21/31 GJM03/15 TV190C LLL15/18/21/31 60-120 seconds ERB18/21 GQM18/21 GRM32/43/55 Time 20 seconds max. [Allowable Reflow Soldering Temperature and Time] LLA18/21/31 TV130C LLM21/31 GNM ERB32 Recommended Conditions Pb-Sn Solder Infrared Reflow Vapor Reflow Lead Free Solder Peak Temperature 230 to 250C 230 to 240C 240 to 260C Atmosphere Air Air Air or N2 Soldering Temperature (D) 8 1. When sudden heat is applied to the components, the mechanical strength of the components will decrease because a sudden temperature change causes deformation inside the components. In order to prevent mechanical damage to the components, preheating is required for both the components and the PCB board. Preheating conditions are shown in table 1. It is required to keep the temperature differential between the solder and the components surface (T) as small as possible. 2. Solderability of Tin plating termination chips might be deteriorated when a low temperature soldering profile where the peak solder temperature is below the melting point of Tin is used. Please confirm the Solderability of Tin plated termination chips before use. 3. When components are immersed in solvent after mounting, be sure to maintain the temperature difference (T) between the component and the solvent within the range shown in the table 1. 280 270 260 250 240 230 220 0 30 60 90 120 Soldering Time (sec.) In case of repeated soldering, the accumulated soldering time must be within the range shown above. Pb-Sn Solder: Sn-37Pb Lead Free Solder: Sn-3.0Ag-0.5Cu 4. Optimum Solder Amount for Reflow Soldering 4-1. Overly thick application of solder paste results in a excessive solder fillet height. This makes the chip more susceptible to mechanical and thermal stress on the board and may cause the chips to crack. 4-2. Too little solder paste results in a lack of adhesive strength on the outer electrode, which may result in chips breaking loose from the PCB. 4-3. Make sure the solder has been applied smoothly to the end surface to a height of 0.2mm* min. 0.2mm min. GRM02/03: 1/3 of Chip Thickness min. in section Inverting the PCB Make sure not to impose any abnormal mechanical shocks to the PCB. Continued on the following page. 146 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. !Caution !Caution Continued from the preceding page. 4-2. Flow Soldering Table 2 Part Number Temperature Differential ,,,, ,,,, ,,,, ,,, ,,, [Standard Conditions for Flow Soldering] Temperature (D) Soldering Soldering Peak Temperature Gradual Cooling T Preheating Peak Temperature Preheating 30-90 seconds Time 5 seconds max. [Allowable Flow Soldering Temperature and Time] Soldering Temperature (D) 1. When sudden heat is applied to the components, the mechanical strength of the components will decrease because a sudden temperature change causes deformation inside the components. In order to prevent mechanical damage in the components, preheating should be required for both of the components and the PCB board. Preheating conditions are shown in table 2. It is required to keep temperature differential between the solder and the components surface (T) as small as possible. 2. Excessively long soldering time or high soldering temperature can result in leaching of the outer electrodes, causing poor adhesion or a reduction in capacitance value due to loss of contact between electrodes and end termination. 3. When components are immersed in solvent after mounting, be sure to maintain the temperature difference (T) between the component and solvent within the range shown in the table 2. 4. Do not apply flow soldering to chips not listed in table 2. 280 270 260 250 8 240 230 220 0 10 20 30 40 Soldering Time (sec.) In case of repeated soldering, the accumulated soldering time must be within the range shown above. GRM18/21/31 LLL21/31 TV150C ERB18/21 GQM18/21 Recommended Conditions Pb-Sn Solder Lead Free Solder Preheating Peak Temperature 90 to 110C 100 to 120C Soldering Peak Temperature 240 to 250C 250 to 260C Atmosphere Air N2 Pb-Sn Solder: Sn-37Pb Lead Free Solder: Sn-3.0Ag-0.5Cu 5. Optimum Solder Amount for Flow Soldering 5-1. The top of the solder fillet should be lower than the thickness of components. If the solder amount is excessive, the risk of cracking is higher during board bending or any other stressful condition. Up to Chip Thickness Adhesive in section Continued on the following page. 147 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. !Caution Continued from the preceding page. 4-3. Correction with a Soldering Iron 8 1. When sudden heat is applied to the components when using a soldering iron, the mechanical strength of the components will decrease because the extreme temperature change can cause deformations inside the components. In order to prevent mechanical damage to the components, preheating is required for both the components and the PCB board. Preheating conditions, (The "Temperature of the Soldering Iron Tip", "Preheating Temperature", "Temperature Differential" between the iron tip and the components and the PCB), should be within the conditions of table 3. It is required to keep the temperature differential between the soldering iron and the component surfaces (T) as small as possible. 2. After soldering, do not allow the component/PCB to rapidly cool down. 3. The operating time for the re-working should be as short as possible. When re-working time is too long, it may cause solder leaching, and that will cause a reduction in the adhesive strength of the terminations. 4. Optimum Solder amount when re-working with a Soldering lron 4-1. In case of sizes smaller than 0603, (GRM03/15/18, GJM03/15, GQM18, ERB18), the top of the solder fillet should be lower than 2/3's of the thickness of the component or 0.5mm whichever is smaller. In case of 0805 and larger sizes, (GRM21/31/32/43/55, GQM21, ERB21/32), the top of the solder fillet should be lower than 2/3's of the thickness of the component. If the solder amount is excessive, the risk of cracking is higher during board bending or under any other stressful condition. 4-2. A soldering iron with a tip of o3mm or smaller should be used. It is also necessary to keep the soldering iron from touching the components during the re-work. 4-3. Solder wire with o0.5mm or smaller is required for soldering. Table 3 Part Number Temperature Preheating Temperature of Soldering Differential Atmosphere Iron Tip Temperature (T) GRM03/15/18/21/31 GJM03/15 GQM18/21 350C max. 150C min. TV190C Air 280C max. 150C min. TV130C Air ERB18/21 GRM32/43/55 ERB32 *Applicable for both Pb-Sn and Lead Free Solder. Pb-Sn Solder: Sn-37Pb Lead Free Solder: Sn-3.0Ag-0.5Cu Solder Amount in section 4-4. Leaded Component Insertion 1. If the PCB is flexed when leaded components (such as transformers and ICs) are being mounted, chips may crack and solder joints may break. Before mounting leaded components, support the PCB using backup pins or special jigs to prevent warping. 5. Washing Excessive ultrasonic oscillation during cleaning can cause the PCBs to resonate, resulting in cracked chips or broken solder joints. Take note not to vibrate PCBs. Continued on the following page. 148 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. !Caution !Caution Continued from the preceding page. 6. Electrical Test on Printed Circuit Board 1. Confirm position of the support pin or specific jig, when inspecting the electrical performance of a capacitor after mounting on the printed circuit board. 1-1. Avoid bending printed circuit board by the pressure of a test pin, etc. The thrusting force of the test probe can flex the PCB, resulting in cracked chips or open solder joints. Provide support pins on the back side of the PCB to prevent warping or flexing. 1-2. Avoid vibration of the board by shock when a test pin contacts a printed circuit board. [Not Recommended] Peeling Test-pin [Recommended] Support Pin Test-pin 7. Printed Circuit Board Cropping 1. After mounting a capacitor on a printed circuit board, do not apply any stress to the capacitor that is caused by bending or twisting the board. 1-1. In cropping the board, the stress as shown right may cause the capacitor to crack. Try not to apply this type of stress to a capacitor. 8 [Bending] [Twisting] 2. Check of the cropping method for the printed circuit board in advance. 2-1. Printed circuit board cropping shall be carried out by using a jig or an apparatus to prevent the mechanical stress which can occur to the board. (1) Example of a suitable jig Recommended example: the board should be pushed as close to the near the cropping jig as possible and from the back side of board in order to minimize the compressive stress applied to capacitor. Not recommended example* when the board is pushed at a point far from the cropping jig and from the front side of board as below, the capacitor may form a crack caused by the tensile stress applied to capacitor. [Outline of Jig] Printed Circuit Board Boad Cropping Jig Recommended Direction of Load Printed Circuit Board V-groove Not recommended Direction of Load Load Point Components Load Point Printed Circuit Board Components Continued on the following page. 149 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. !Caution Continued from the preceding page. (2) Example of a suitable machine An outline of a printed circuit board cropping machine is shown as follows. Along the lines with the V-grooves on printed circuit board, the top and bottom blades are aligned to one another when cropping the board. The misalignment of the position between top and bottom blades may cause the capacitor to crack. [Outline of Machine] Top Blade Printed Circuit Board Top Blade [Principle of Operation] Bottom Blade V-groove [Cross-section Diagram] Printed Circuit Board V-groove 8 Recommended 150 Not Recommended Top-bottom Misalignment Left-right Misalignment Front-rear Misalignment Top Blade Top Blade Top Blade Top Blade Bottom Blade Bottom Blade Bottom Blade Bottom Blade PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. !Caution !Caution Others 1. Under Operation of Equipment 1-1. Do not touch a capacitor directly with bare hands during operation in order to avoid the danger of a electric shock. 1-2. Do not allow the terminals of a capacitor to come in contact with any conductive objects (short-circuit). Do not expose a capacitor to a conductive liquid, inducing any acid or alkali solutions. 1-3. Confirm the environment in which the equipment will operation is under the specified conditions. Do not use the equipment under the following environment. (1) Being spattered with water or oil. (2) Being exposed to direct sunlight. (3) Being exposed to Ozone, ultraviolet rays or radiation. (4) Being exposed to toxic gas (e.g., hydrogen sulfide, sulfur dioxide, chlorine, ammonia gas, etc.) (5) Any vibrations or mechanical shocks exceeding the specified limits. (6) Moisture condensing environments. 1-4. Use damp proof countermeasures if using under any conditions that can cause condensation. 2. Others 2-1. In an Emergency (1) If the equipment should generate smoke, fire or smell, immediately turn off or unplug the equipment. If the equipment is not turned off or unplugged, the hazards may be worsened by supplying continuous power. (2) In this type of situation, do not allow face and hands to come in contact with the capacitor or burns may be caused by the capacitors high temperature. 2-2. Disposal of Waste When capacitors are disposed, they must be burned or buried by the industrial waste vender with the appropriate licenses. 2-3. Circuit Design GRM, GCM, GMA/D, LLL/A/M, ERB, GQM, GJM, GNM Series capacitors in this catalog are not safety certified products. 2-4. Remarks Failure to follow the cautions may result, worst case, in a short circuit and smoking when the product is used. The above notices are for standard applications and conditions. Contact us when the products are used in special mounting conditions. Select optimum conditions for operation as they determine the reliability of the product after assembly. The data herein are given in typical values, not guaranteed ratings. 151 8 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Notice Rating 8 1. Operating Temperature 1. The operating temperature limit depends on the capacitor. 1-1. Do not apply temperatures exceeding the upper operating temperature. It is necessary to select a capacitor with a suitable rated temperature which will cover the operating temperature range. Also it is necessary to consider the temperature distribution in equipment and the seasonal temperature variable factor. 1-2. Consider the self-heating of the capacitor The surface temperature of the capacitor shall be the upper operating temperature or less when including the self-heating factors. 2. Atmosphere Surroundings (gaseous and liquid) 1. Restriction on the operating environment of capacitors. 1-1. The capacitor, when used in the above, unsuitable, operating environments may deteriorate due to the corrosion of the terminations and the penetration of moisture into the capacitor. 152 1-2. The same phenomenon as the above may occur when the electrodes or terminals of the capacitor are subject to moisture condensation. 1-3. The deterioration of characteristics and insulation resistance due to the oxidization or corrosion of terminal electrodes may result in breakdown when the capacitor is exposed to corrosive or volatile gases or solvents for long periods of time. 3. Piezo-electric Phenomenon 1. When using high dielectric constant type capacitors in AC or pulse circuits, the capacitor itself vibrates at specific frequencies and noise may be generated. Moreover, when the mechanical vibration or shock is added to capacitor, noise may occur. PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Notice Notice Soldering and Mounting 1. PCB Design 1. Notice for Pattern Forms 1-1. Unlike leaded components, chip components are susceptible to flexing stresses since they are mounted directly on the substrate. They are also more sensitive to mechanical and thermal stresses than leaded components. Excess solder fillet height can multiply these stresses and cause chip cracking. When designing substrates, take land patterns and dimensions into consideration to eliminate the possibility of excess solder fillet height. 1-2. It is possible for the chip to crack by the expansion and shrinkage of a metal board. Please contact us if you want to use our ceramic capacitors on a metal board such as Aluminum. Pattern Forms Prohibited 8 Correct Chassis Solder (ground) Solder Resist Placing Close to Chassis Electrode Pattern Lead Wire Solder Resist Placing of Chip Components and Leaded Components Soldering Iron Lead Wire Placing of Leaded Components after Chip Component Solder Resist Solder Resist Lateral Mounting Continued on the following page. 153 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Notice Continued from the preceding page. 2. Land Dimensions 2-1. Chip capacitor can be cracked due to the stress of PCB bending / etc if the land area is larger than needed and has an excess amount of solder. Please refer to the land dimensions in table 1 for flow soldering, table 2 for reflow soldering, table 3 for GNM & LLA, and table 4 for LLM. Please confirm the suitable land dimension by evaluating of the actual SET / PCB. Chip Capacitor Land c b a Solder Resist Table 1 Flow Soldering Method Dimensions Chip (LgW) a b c GRM18 GQM18 1.6g0.8 0.6 to 1.0 0.8 to 0.9 0.6 to 0.8 GRM21 GQM21 2.0g1.25 1.0 to 1.2 0.9 to 1.0 0.8 to 1.1 GRM31 3.2g1.6 2.2 to 2.6 1.0 to 1.1 1.0 to 1.4 LLL21 1.25g2.0 0.4 to 0.7 0.5 to 0.7 1.4 to 1.8 LLL31 1.6g3.2 0.6 to 1.0 0.8 to 0.9 2.6 to 2.8 ERB11 1.25g1.0 0.4 to 0.6 0.6 to 0.8 0.8 to 1.0 ERB21 2.0g1.25 1.0 to 1.2 0.9 to 1.0 0.8 to 1.0 ERF1D 1.4g1.4 0.5 to 0.8 0.8 to 0.9 1.0 to 1.2 Part Number 8 (in mm) Table 2 Reflow Soldering Method Dimensions Chip (LgW) a b c GRM02 0.4g0.2 0.16 to 0.2 0.12 to 0.18 0.2 to 0.23 GRM03 GJM03 0.6g0.3 0.2 to 0.3 0.2 to 0.35 0.2 to 0.4 GRM15 GJM15 1.0g0.5 0.3 to 0.5 0.35 to 0.45 0.4 to 0.6 GRM18 GQM18 1.6g0.8 0.6 to 0.8 0.6 to 0.7 0.6 to 0.8 GRM21 GQM21 2.0g1.25 1.0 to 1.2 0.6 to 0.7 0.8 to 1.1 GRM31 3.2g1.6 2.2 to 2.4 0.8 to 0.9 1.0 to 1.4 GRM32 3.2g2.5 2.0 to 2.4 1.0 to 1.2 1.8 to 2.3 GRM43 4.5g3.2 3.0 to 3.5 1.2 to 1.4 2.3 to 3.0 GRM55 5.7g5.0 4.0 to 4.6 1.4 to 1.6 3.5 to 4.8 LLL15 0.5g1.0 0.15 to 0.2 0.2 to 0.25 0.7 to 1.0 LLL18 0.8g1.6 0.2 to 0.3 0.3 to 0.4 1.4 to 1.6 LLL21 1.25g2.0 0.4 to 0.6 0.4 to 0.5 1.4 to 1.8 LLL31 1.6g3.2 0.6 to 0.8 0.6 to 0.7 2.6 to 2.8 ERB11 1.25g1.0 0.4 to 0.6 0.6 to 0.8 0.8 to 1.0 ERB21 2.0g1.25 1.0 to 1.2 0.6 to 0.8 0.8 to 1.0 ERB32 3.2g2.5 2.2 to 2.5 0.8 to 1.0 1.9 to 2.3 Part Number ERF1D 1.4g1.4 0.4 to 0.8 0.6 to 0.8 1.0 to 1.2 ERF22 2.8g2.8 1.8 to 2.1 0.7 to 0.9 2.2 to 2.6 (in mm) Continued on the following page. 154 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Notice Notice Continued from the preceding page. GNMpp2 GNMpp4 LLA Chip Capacitor Chip Capacitor a a b b c Land p c Land p Table 3 GNM, LLA Series for Reflow Soldering Land Dimensions Dimensions (mm) Part Number L W a b c p GNM0M2 0.9 0.6 0.12 to 0.20* 0.35 to 0.40* 0.3 0.45 GNM1M2 1.37 1.0 0.4 to 0.5 0.35 to 0.45 0.3 to 0.35 0.64 GNM212 2.0 1.25 0.6 to 0.7 0.5 to 0.7 0.4 to 0.5 1.0 GNM214 2.0 1.25 0.6 to 0.7 0.5 to 0.7 0.25 to 0.35 0.5 GNM314 3.2 1.6 0.8 to 1.0 0.7 to 0.9 0.3 to 0.4 0.8 LLA18 1.6 0.8 0.3 to 0.4 0.25 to 0.35 0.15 to 0.25 0.4 0.2 to 0.3 0.5 0.3 to 0.4 0.8 e f p LLA21 2.0 1.25 0.5 to 0.7 0.35 to 0.6 LLA31 3.2 1.6 0.7 to 0.9 0.4 to 0.7 8 * 0.82Va+2bV1.00 p LLM c b e a Chip Capacitor c' b' f d Table 4 LLM Series for Reflow Soldering Land Dimensions Dimensions (mm) Part Number a b, b' c, c' d LLM21 0.6 to 0.8 (0.3 to 0.5) 0.3 2.0 to 2.6 1.3 to 1.8 1.4 to 1.6 0.5 LLM31 1.0 (0.3 to 0.5) 0.4 3.2 to 3.6 1.6 to 2.0 2.6 0.8 b=(c-e)/2, b'=(d-f)/2 2. Adhesive Application 1. Thin or insufficient adhesive can cause the chips to loosen or become disconnected during flow soldering. The amount of adhesive must be more than dimension c, shown in the drawing at right, to obtain the correct bonding strength. The chip's electrode thickness and land thickness must also be taken into consideration. 2. Low viscosity adhesive can cause chips to slip after mounting. The adhesive must have a viscosity of 5000Pa * s (500ps) min. (at 25C). 3. Adhesive Coverage Part Number GRM18, GQM18 Chip Capacitor a=20 to 70m b=30 to 35m c=50 to 105m a c Board Adhesive Land b Adhesive Coverage* 0.05mg min. GRM21, LLL21, GQM21 0.1mg min. GRM31, LLL31 0.15mg min. *Nominal Value Continued on the following page. 155 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Notice Continued from the preceding page. 3. Adhesive Curing 1. Insufficient curing of the adhesive can cause chips to disconnect during flow soldering and causes deterioration in the insulation resistance between the outer electrodes due to moisture absorption. Control curing temperature and time in order to prevent insufficient hardening. 4. Flux Application 1. An excessive amount of flux generates a large quantity of flux gas, which can cause a deterioration of Solderability. So apply flux thinly and evenly throughout. (A foaming system is generally used for flow soldering). 2. Flux containing too a high percentage of halide may cause corrosion of the outer electrodes unless there is sufficient cleaning. Use flux with a halide content of 0.2% max. 3. Do not use strong acidic flux. 4. Do not use water-soluble flux. (*Water-soluble flux can be defined as non rosin type flux including wash-type flux and non-wash-type flux.) 8 5. Flow Soldering o Set temperature and time to ensure that leaching of the outer electrode does not exceed 25% of the chip end area as a single chip (full length of the edge A-B-C-D shown right) and 25% of the length A-B shown below as mounted on substrate. [As a Single Chip] A B D Outer Electrode C [As Mounted on Substrate] B A 6. Washing 1. Please evaluate a capacitor by actual cleaning equipment and condition surely for confirming the quality and select the applicable solvent. 2. Unsuitable cleaning solvent may leave residual flux, other foreign substances, causing deterioration of electrical characteristics and the reliability of the capacitors. 3. Select the proper cleaning conditions. 3-1. Improper cleaning conditions (excessive or insufficient) may result in the deterioration of the performance of the capacitors. Continued on the following page. 156 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Notice Notice Continued from the preceding page. 7. Coating 1. A crack may be caused in the capacitor due to the stress of the thermal contraction of the resin during curing process. The stress is affected by the amount of resin and curing contraction. Select a resin with small curing contraction. The difference in the thermal expansion coefficient between a coating resin or a molding resin and capacitor may cause the destruction and deterioration of the capacitor such as a crack or peeling, and lead to the deterioration of insulation resistance or dielectric breakdown. Select a resin for which the thermal expansion coefficient is as close to that of capacitor as possible. A silicone resin can be used as an under-coating to buffer against the stress. 2. Select a resin that is less hygroscopic. Using hygroscopic resins under high humidity conditions may cause the deterioration of the insulation resistance of a capacitor. An epoxy resin can be used as a less hygroscopic resin. 8. Die Bonding/Wire Bonding (GMA or GMD Series) 1. Die Bonding of Capacitors * Use the following materials for the Brazing alloys: Au-Sn (80/20) 300 to 320 degree C in N2 atmosphere * Mounting (1) Control the temperature of the substrate so it matches the temperature of the brazing alloy. (2) Place the brazing alloy on the substrate and place the capacitor on the alloy. Hold the capacitor and gently apply the load. Be sure to complete the operation within 1 minute. 2. Wire Bonding * Wire Gold wire: 25 micro m (0.001 inch) diameter * Bonding (1) Thermo compression, ultrasonic ball bonding. (2) Required stage temperature: 150 to 200 degree C (3) Required wedge or capillary weight: 0.2N to 0.5N (4) Bond the capacitor and base substrate or other devices with gold wire. 157 8 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Notice Others 1. Transportation 1. The performance of a capacitor may be affected by the conditions during transportation. 1-1. The capacitors shall be protected against excessive temperature, humidity and mechanical force during transportation. (1) Climatic condition * low air temperature: -40C * change of temperature air/air: -25C/+25C * low air pressure: 30 kPa * change of air pressure: 6 kPa/min. (2) Mechanical condition Transportation shall be done in such a way that the boxes are not deformed and forces are not directly passed on to the inner packaging. 8 158 1-2. Do not apply excessive vibration, shock, and pressure to the capacitor. (1) When excessive mechanical shock or pressure is applied to a capacitor, chipping or cracking may occur in the ceramic body of the capacitor. (2) When a sharp edge of an air driver, a soldering iron, tweezers, a chassis, etc. impacts strongly on the surface of capacitor, the capacitor may crack and short-circuit. 1-3. Do not use a capacitor to which excessive shock was applied by dropping, etc. The capacitor dropped accidentally during processing may be damaged. PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Reference Data 1. Solderability (1) Test Method Subject the chip capacitor to the following conditions. Then apply flux (an ethanol solution of 25% rosin) to the chip and dip it in 230D eutectic solder for 2 seconds. Conditions: Expose prepared at room temperature (for 6 months and 12 months, respectively) Prepared at high temperature (for 100 hours at 85D) Prepared left at high humidity (for 100 hours under 90%RH to 95%RH at 40D) (2) Test Samples GRM21 : Products for flow/reflow soldering. (3) Acceptance Criteria With a 60-power optical microscope, measure the surface area of the outer electrode that is covered with solder. (4) Results Refer to Table 1. Table 1 Sample Initial State GRM21 for flow/reflow soldering 95 to 100% 6 months 12 months Prepared at High Temperature for 100 Hours at 85D 95 to 100% 95% 90 to 95% Prepared at Room Temperature Prepared at High Humidity for 100 Hours at 90 to 95% RH and 40D 95% 8 2. Board Bending Strength for Solder Fillet Height (1) Test Method Solder the chip capacitor to the test PCB with the amount of solder paste necessary to achieve the fillet heights. Then bend the PCB using the method illustrated and measure capacitance. 20 50 Capacitor R230 Supporting Base 45 Capacitance Meter 1.65 1.2 40 1.0 S T W X \ (c) VYZ[^(c)[\ZXY(R)^_]WVTSTS(R)|]ZYWUVQR, ZY(R)|]VUQ, 45 Pressurizing Speed : 1.0mm/sec. Pressurize Note : The material of pressure application jig and support is the quenched metal. (hardness HB 183-255 or superhardness HRA90 or more) Flexure 4.0 100 Material : Glass Epoxy : Copper Foil (0.35mm thick) : Solder Resist Solder Amount Larger Fillet. Fillet up to Chip Thickness 1.6 (in mm) (2) Test Samples GRM21: 5C/R7/F5 Characteristics T=0.6mm (3) Acceptance Criteria Products should be determined to be defective if the change in capacitance has exceeded the values specified in Table 2. Table 2 1 Characteristics Change in Capacitance 5C Within T5% or T0.5pF, whichever is greater R7 Within T12.5% F5 Within T20% Continued on the following page. 159 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Reference Data Continued from the preceding page. R S T W X \ (c) S T X (c) (R)(c)_^]Z[\XW(R)^]Y|YUVSRQ,_\(R)]^Y(c)|^YZ[XUVWSQR, T _\(R)|_]^[YZVU(c)|[ZVWXUTRSQ,Q, (4) Results GRM21 5C (T=0.6) GRM21 R7 (T=0.6) 100 80 Survival Rate (%) Survival Rate (%) 100 Fillet up to Chip Thickness 60 Larger Fillet 40 20 80 Fillet up to Chip Thickness 60 40 Larger Fillet 20 0 0 0 2 4 Flexure (mm) 6 8 0 2 4 Flexure (mm) 6 8 GRM21 F5 (T=0.6) Survival Rate (%) 100 8 80 Fillet up to Chip Thickness 60 40 Larger Fillet 20 0 0 2 4 Flexure (mm) 6 8 3. Temperature Cycling for Solder Fillet Height (1) Test Method Solder the chips to the substrate of various test fixtures using sufficient amounts of solder to achieve the required fillet height. Then subject the fixtures to the cycle illustrated below 200 times. [Temperature Cycling] +125D Room Temperature Time (min.) -55D 5 Substrate 30 Glass Epoxy or Paper Phenol 1.3T w T e 1.6T 0.7T q T 0.5T Alumina 6Z4 Eutectic solder Solder to be used e Land Dimension 5 [Solder Amount] Solder Amount q Solder Amount Alumina substrates are typically designed for reflow soldering. Glass epoxy or paper phenol substrates are typically used for flow soldering. w Material Alumina (Thickness: 0.64mm) Glass epoxy (Thickness: 1.64mm) Paper phenol (Thickness: 1.64mm) 30 [Land Dimension] 1.5 Land Pattern Alumina Substrate 1.5 1.2 1.5 (in mm) Glass Epoxy Substrate Paper Phenol Substrate Ag/Pd=72/28 Thickness: 10 to 12m Cu Thickness: 35m Continued on the following page. 160 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Reference Data Continued from the preceding page. (2) Test Samples GRM21 5C/R7/F5 Characteristics T=0.6mm (3) Acceptance Criteria Products are determined to be defective if the change in capacitance has exceeded the values specified in Table 3. Table 3 Characteristics Change in Capacitance 5C Within T2.5% or T0.25pF, whichever is greater R7 Within T7.5% F5 Within T20% (4) Results Alumina Substrate (Thickness 0.64mm) GRM21 R7 (T=0.6) 80 60 40 20 0 0 50 e qw 100 150 200 Number of Cycles Accumulated Percent Defective (%) Accumulated Percent Defective (%) GRM21 F5 (T=0.6) 100 8 100 80 e 60 40 20 0 0 50 w q 100 150 200 Number of Cycles Accumulated Percent Defective (%) GRM21 5C (T=0.6) 100 80 e 60 40 w 20 0 0 50 100 q 150 200 Number of Cycles Glass Epoxy Substrate (Thickness 1.6mm) GRM21 R7 (T=0.6) 80 60 40 20 0 0 e 50 qw 100 150 200 Number of Cycles Accumulated Percent Defective (%) Accumulated Percent Defective (%) GRM21 F5 (T=0.6) 100 100 80 60 40 e 20 0 0 50 qw 100 150 200 Number of Cycles Accumulated Percent Defective (%) GRM21 5C (T=0.6) 100 80 60 40 e 20 0 0 50 100 qw 150 200 Number of Cycles Paper Phenol Substrate (Thickness 1.6mm) 60 40 20 50 qwe 100 150 200 Number of Cycles Accumulated Percent Defective (%) Accumulated Percent Defective (%) 80 0 0 GRM21 R7 (T=0.6) GRM21 F5 (T=0.6) 100 100 80 60 40 20 0 0 e 50 qw 100 150 200 Number of Cycles Accumulated Percent Defective (%) GRM21 5C (T=0.6) 100 80 60 40 20 0 0 50 100 e qw 150 200 Number of Cycles Continued on the following page. 161 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Reference Data Continued from the preceding page. 4. Board Bending Strength for Board Material (1) Test Method Solder the chip to the test board. Then bend the board using the method illustrated below, to measure capacitance. 20 Capacitor (c)\X(c)X|YU\_^[STRQ,(c)\[XVWRQ,|U Y X (c) , R Q U T S W V [ Z ] \ ^ _ | (R) _^ |U R230 1.65 45 1.2 Pressurizing Speed : 1.0mm/sec. Pressurize Note : Material of the pressurizing jig and the supporting base must be hardened steel (Hardness : HB183 to 255 or carbide Hardness : HRA90 min.) Flexure Capacitance Meter 40 1.0 45 Supporting Base 50 4.0 Solder Amount Up to Chip Thickness 1.6 100 : Copper Foil (0.035mm thick) : Solder Resist (in mm) 8 (2) Test Samples GRM21 5C/R7/F5 Characteristics T=0.6mm typical (3) Acceptance Criteria Products should be determined to be defective if the change in capacitance has exceeded the values specified in Table 4. Table 4 Characteristics Change in Capacitance 5C Within T5% or T0.5pF, whichever is greater R7 Within T12.5% F5 Within T20% S T T , Q R S T U V W Y X Z [ \ ^ _ | (c) T W X Z [ \ _ (c) , Q R U | _^\[(R)](R)|]ZYWVURQ,(R)^](R)(c)|_^]\[ZXYWVUSRQ, T (c)_\[ZXWT(R)(c)|_^]\[ZXYWVUTSRQ,|VUSRQ, (R)_^]Z |YU (4) Results GRM21 R7 (T=0.6) GRM21 5C (T=0.6) 100 100 Paper Phenol Survival Rate (%) Survival Rate (%) Paper Phenol 80 60 Glass Epoxy 40 20 80 60 40 Glass Epoxy 20 0 0 0 2 4 Flexure (mm) 6 8 0 2 4 Flexure (mm) 6 8 GRM21 F5 (T=0.6) Survival Rate (%) 100 Paper Phenol 80 60 40 Glass Epoxy 20 0 0 2 4 Flexure (mm) 6 8 Continued on the following page. 162 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Reference Data Continued from the preceding page. 5. Break Strength (2) Test Samples GRM21 5C/R7/F5 Characteristics GRM31 5C/R7/F5 Characteristics P Pressurizing speed : 2.5mm/sec. Amplifier Load cell Storage scope Loading Jig End 1.0mm T S X W \ (c) (R)]^_YZ|UQR, (1) Test Method Place the chip on a steel plate as illustrated on the right. Increase load applied to a point near the center of the test sample. Sample P0.5mm Steel plate (3) Acceptance Criteria Define the load that has caused the chip to break or crack, as the bending force. W Chip Size L 5C R7 F5 Charac- Charac- Characteristics teristics teristics W T (4) Explanation Break strength, P, is proportionate to the square of the thickness of the ceramic element and is expressed as a curve of secondary degree. The formula is: 2 WT2 P= (N) 3L W : Width of ceramic element (mm) T : Thickness of element (mm) L : Distance between fulcrums (mm) : Bending stress (N/mm2) L GRM21 1.5 1.2 GRM31 2.7 1.5 300 180 160 (in mm) 8 (5) Results GRM21 GRM31 R7 F5 100 80 60 40 20 0 0 0.4 0.8 1.2 Thickness of Ceramic Element (mm) 1.6 140 5C 120 100 R7 80 40 20 0 0 0.4 0.8 1.2 Thickness of Ceramic Element (mm) 6. Thermal Shock Dipping Speed : 25mm/sec. ,Q|RU ^ (R) ] \UY| (1) Test method After applying flux (an ethanol solution of 25% rosin), dip the chip in a solder bath (6Z4 eutectic solder) in accordance with the following conditions: F5 60 Temperature 5C 120 Bending-break Strength (N) Bending-break Strength (N) 140 Chip Capacitor 1.6 Solder Temperature T Natural Cooling Solder Bath 25D (2) Test samples GRM21 5C/R7/F5 Characteristics T=0.6mm typical 2 sec. Time (3) Acceptance criteria Visually inspect the test sample with a 60-power optical microscope. Chips exhibiting breaks or cracks should be determined to be defective. Continued on the following page. 163 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Reference Data Continued from the preceding page. (4) Results Incidence of Cracks (%) 100 80 60 F5 40 R7 20 5C 0 200 240 280 320 360 Temperature Differential T (D) 7. Solder Heat Resistance e Dip soldering: After dipping the test sample with a pair of tweezers in static solder (eutectic solder), check for leaching that may have occurred on the outer electrode. r Flux to be used: An ethanol solution of 25% rosin. (2) Test samples GRM21: For flow/reflow soldering T=0.6mm (3) Acceptance criteria The starting time of leaching should be defined as the time when the outer electrode has lost 25% of the total edge length of A-B-C-D as illustrated: A B D C Outer Electrode (4) Results Flow Soldering Soldering Temperature (D) Soldering Temperature (D) Reflow Soldering 280 270 260 250 240 230 220 210 0 60 120 180 240 Leaching Starting Time (sec.) 280 270 260 250 240 230 220 210 0 10 20 30 40 50 60 Leaching Starting Time (sec.) Dip Soldering Soldering Temperature (D) 8 (1) Test Method q Reflow soldering: Apply about 300 m of solder paste over the alumina substrate. After reflow soldering, remove the chip and check for leaching that may have occurred on the outer electrode. w Flow soldering: After dipping the test sample with a pair of tweezers in wave solder (eutectic solder), check for leaching that may have occurred on the outer electrode. 280 270 260 250 240 230 220 210 0 10 20 30 40 50 60 Leaching Starting Time (sec.) Continued on the following page. 164 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Reference Data Continued from the preceding page. 8. Thermal Shock when Making Corrections with a Soldering Iron (1) Test Method Apply a soldering iron meeting the conditions below to the soldered joint of a chip that has been soldered to a paper phenol board, while supplying wire solder. (Note: the soldering iron tip should not directly touch the ceramic element of the chip.) Mounting Solder Soldering lron Wire Solder Duration of Touching : Approx. 3 sec. Paper Phenol Substrate (2) Test Samples GRM21 5C/R7/F5 Characteristics T=0.6mm Soldering Iron Tip Diameter Ceramic heater 20W 3mm (3) Acceptance Criteria for Defects Observe the appearance of the test sample with a 60-power optical microscope. Those units displaying any breaks or cracks are determined to be defective. (4) Results 8 GRM21 R7 (T=0.6) 100 Incidence of Cracks (%) Incidence of Cracks (%) GRM21 5C (T=0.6) 80 60 40 20 0 200 240 280 320 Soldering Iron Tip Temperature (D) 360 100 80 60 40 20 0 200 240 280 320 Soldering Iron Tip Temperature (D) 360 Incidence of Cracks (%) GRM21 F5 (T=0.6) 100 80 60 40 20 0 200 240 280 320 Soldering Iron Tip Temperature (D) 360 165 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Chip Monolithic Ceramic Capacitors Medium Voltage Low Dissipation Factor e g e Features T 1. Low-loss and suitable for high frequency circuits 2. Murata's original internal electrode structure realizes high flash-over voltage. 3. A new monolithic structure for small, surfacemountable devices capable of operating at high voltage levels 4. Sn-plated external electrodes realize good solderability. 5. Use the GRM21/31 type with flow or reflow soldering, and other types with reflow soldering only. L Part Number W Dimensions (mm) L W T e min. 2.0 0.2 1.25 0.2 1.0 +0,- 0.3 3.2 0.2 1.6 0.2 1.25 +0,- 0.3 GRM21A GRM31A GRM31B 0.3 1.0 +0,- 0.3 GRM32A 3.2 0.2 2.5 0.2 1.25 +0,- 0.3 GRM32B GRM42A 4.5 0.3 2.0 0.2 1.0 +0,- 0.3 * GRM31A7U3D, GRM32A7U3D, GRM32B7U3D : 1.8mm min. g min. 0.7 1.5* 2.9 Applications Ideal for use on high frequency pulse circuits such as snubber circuits for switching power supplies, DC-DC converters, ballasts (inverter fluorescent lamps), etc. 9 Do not use these products in any Automotive Power train or Safety equipment including Battery charger for Electric Vehicles and Plug-in Hybrid. Only Murata products clearly stipulated as "for Automotive use" on its catalog can be used for automobile applications such as Power train and Safety equipment. *: In case of use C0G char., DC630V product with pulse voltage, be sure not to use with 10kHz and less pulse or ripple voltage condition. and these product are not suitable for commercial power line voltage application, such as AC filter. For those applications, be sure to use AC voltage rating product.(GA2/GA3 series) C0G Characteristics Electrode g min. (mm) Electrode e (mm) 1.0 1.5 0.3 min. 1.0 1.5 0.3 min. 1.6 1.0 1.5 0.3 min. 3.2 1.6 1.0 1.5 0.3 min. 3.2 1.6 1.0 1.5 0.3 min. 270 5% 3.2 1.6 1.0 1.5 0.3 min. C0G (EIA) 330 5% 3.2 1.6 1.0 1.5 0.3 min. DC630 C0G (EIA) 390 5% 3.2 1.6 1.0 1.5 0.3 min. GRM31A5C2J471JW01D DC630 C0G (EIA) 470 5% 3.2 1.6 1.0 1.5 0.3 min. GRM31A5C2J561JW01D DC630 C0G (EIA) 560 5% 3.2 1.6 1.0 1.5 0.3 min. GRM31B5C2J681JW01L DC630 C0G (EIA) 680 5% 3.2 1.6 1.25 1.5 0.3 min. GRM31B5C2J821JW01L DC630 C0G (EIA) 820 5% 3.2 1.6 1.25 1.5 0.3 min. GRM31B5C2J102JW01L DC630 C0G (EIA) 1000 5% 3.2 1.6 1.25 1.5 0.3 min. Part Number Rated Voltage (V) TC Code (Standard) Capacitance (pF) GRM31A5C2J101JW01D DC630 C0G (EIA) 100 5% 3.2 1.6 GRM31A5C2J121JW01D DC630 C0G (EIA) 120 5% 3.2 1.6 GRM31A5C2J151JW01D DC630 C0G (EIA) 150 5% 3.2 GRM31A5C2J181JW01D DC630 C0G (EIA) 180 5% GRM31A5C2J221JW01D DC630 C0G (EIA) 220 5% GRM31A5C2J271JW01D DC630 C0G (EIA) GRM31A5C2J331JW01D DC630 GRM31A5C2J391JW01D 166 Length L Width W Thickness T (mm) (mm) (mm) PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. U2J Characteristics Electrode g min. (mm) Electrode e (mm) 1.0 0.7 0.3 min. 1.25 1.0 0.7 0.3 min. 1.25 1.0 0.7 0.3 min. 2.0 1.25 1.0 0.7 0.3 min. 220 5% 2.0 1.25 1.0 0.7 0.3 min. U2J (EIA) 270 5% 2.0 1.25 1.0 0.7 0.3 min. DC250 U2J (EIA) 330 5% 2.0 1.25 1.0 0.7 0.3 min. DC250 U2J (EIA) 390 5% 2.0 1.25 1.0 0.7 0.3 min. GRM21A7U2E471JW31D DC250 U2J (EIA) 470 5% 2.0 1.25 1.0 0.7 0.3 min. GRM21A7U2E561JW31D DC250 U2J (EIA) 560 5% 2.0 1.25 1.0 0.7 0.3 min. GRM21A7U2E681JW31D DC250 U2J (EIA) 680 5% 2.0 1.25 1.0 0.7 0.3 min. GRM21A7U2E821JW31D DC250 U2J (EIA) 820 5% 2.0 1.25 1.0 0.7 0.3 min. GRM21A7U2E102JW31D DC250 U2J (EIA) 1000 5% 2.0 1.25 1.0 0.7 0.3 min. GRM21A7U2E122JW31D DC250 U2J (EIA) 1200 5% 2.0 1.25 1.0 0.7 0.3 min. GRM21A7U2E152JW31D DC250 U2J (EIA) 1500 5% 2.0 1.25 1.0 0.7 0.3 min. GRM21A7U2E182JW31D DC250 U2J (EIA) 1800 5% 2.0 1.25 1.0 0.7 0.3 min. GRM21A7U2E222JW31D DC250 U2J (EIA) 2200 5% 2.0 1.25 1.0 0.7 0.3 min. GRM31A7U2E272JW31D DC250 U2J (EIA) 2700 5% 3.2 1.6 1.0 1.5 0.3 min. GRM31A7U2E332JW31D DC250 U2J (EIA) 3300 5% 3.2 1.6 1.0 1.5 0.3 min. GRM31A7U2E392JW31D DC250 U2J (EIA) 3900 5% 3.2 1.6 1.0 1.5 0.3 min. GRM31A7U2E472JW31D DC250 U2J (EIA) 4700 5% 3.2 1.6 1.0 1.5 0.3 min. GRM31A7U2E562JW31D DC250 U2J (EIA) 5600 5% 3.2 1.6 1.0 1.5 0.3 min. GRM31B7U2E682JW31L DC250 U2J (EIA) 6800 5% 3.2 1.6 1.25 1.5 0.3 min. GRM31B7U2E822JW31L DC250 U2J (EIA) 8200 5% 3.2 1.6 1.25 1.5 0.3 min. GRM31B7U2E103JW31L DC250 U2J (EIA) 10000 5% 3.2 1.6 1.25 1.5 0.3 min. GRM31A7U2J100JW31D DC630 U2J (EIA) 10 5% 3.2 1.6 1.0 1.5 0.3 min. GRM31A7U2J120JW31D DC630 U2J (EIA) 12 5% 3.2 1.6 1.0 1.5 0.3 min. GRM31A7U2J150JW31D DC630 U2J (EIA) 15 5% 3.2 1.6 1.0 1.5 0.3 min. GRM31A7U2J180JW31D DC630 U2J (EIA) 18 5% 3.2 1.6 1.0 1.5 0.3 min. GRM31A7U2J220JW31D DC630 U2J (EIA) 22 5% 3.2 1.6 1.0 1.5 0.3 min. GRM31A7U2J270JW31D DC630 U2J (EIA) 27 5% 3.2 1.6 1.0 1.5 0.3 min. GRM31A7U2J330JW31D DC630 U2J (EIA) 33 5% 3.2 1.6 1.0 1.5 0.3 min. GRM31A7U2J390JW31D DC630 U2J (EIA) 39 5% 3.2 1.6 1.0 1.5 0.3 min. GRM31A7U2J470JW31D DC630 U2J (EIA) 47 5% 3.2 1.6 1.0 1.5 0.3 min. GRM31A7U2J560JW31D DC630 U2J (EIA) 56 5% 3.2 1.6 1.0 1.5 0.3 min. GRM31A7U2J680JW31D DC630 U2J (EIA) 68 5% 3.2 1.6 1.0 1.5 0.3 min. GRM31A7U2J820JW31D DC630 U2J (EIA) 82 5% 3.2 1.6 1.0 1.5 0.3 min. GRM31A7U2J101JW31D DC630 U2J (EIA) 100 5% 3.2 1.6 1.0 1.5 0.3 min. GRM31A7U2J121JW31D DC630 U2J (EIA) 120 5% 3.2 1.6 1.0 1.5 0.3 min. GRM31A7U2J151JW31D DC630 U2J (EIA) 150 5% 3.2 1.6 1.0 1.5 0.3 min. GRM31A7U2J181JW31D DC630 U2J (EIA) 180 5% 3.2 1.6 1.0 1.5 0.3 min. GRM31A7U2J221JW31D DC630 U2J (EIA) 220 5% 3.2 1.6 1.0 1.5 0.3 min. GRM31A7U2J271JW31D DC630 U2J (EIA) 270 5% 3.2 1.6 1.0 1.5 0.3 min. GRM31A7U2J331JW31D DC630 U2J (EIA) 330 5% 3.2 1.6 1.0 1.5 0.3 min. GRM31A7U2J391JW31D DC630 U2J (EIA) 390 5% 3.2 1.6 1.0 1.5 0.3 min. GRM31A7U2J471JW31D DC630 U2J (EIA) 470 5% 3.2 1.6 1.0 1.5 0.3 min. GRM31A7U2J561JW31D DC630 U2J (EIA) 560 5% 3.2 1.6 1.0 1.5 0.3 min. GRM31A7U2J681JW31D DC630 U2J (EIA) 680 5% 3.2 1.6 1.0 1.5 0.3 min. GRM31A7U2J821JW31D DC630 U2J (EIA) 820 5% 3.2 1.6 1.0 1.5 0.3 min. GRM31A7U2J102JW31D DC630 U2J (EIA) 1000 5% 3.2 1.6 1.0 1.5 0.3 min. GRM32A7U2J122JW31D DC630 U2J (EIA) 1200 5% 3.2 2.5 1.0 1.5 0.3 min. GRM32A7U2J152JW31D DC630 U2J (EIA) 1500 5% 3.2 2.5 1.0 1.5 0.3 min. GRM32A7U2J182JW31D DC630 U2J (EIA) 1800 5% 3.2 2.5 1.0 1.5 0.3 min. GRM32A7U2J222JW31D DC630 U2J (EIA) 2200 5% 3.2 2.5 1.0 1.5 0.3 min. Part Number Rated Voltage (V) TC Code (Standard) Capacitance (pF) Length L Width W Thickness T (mm) (mm) (mm) GRM21A7U2E101JW31D DC250 U2J (EIA) 100 5% 2.0 1.25 GRM21A7U2E121JW31D DC250 U2J (EIA) 120 5% 2.0 GRM21A7U2E151JW31D DC250 U2J (EIA) 150 5% 2.0 GRM21A7U2E181JW31D DC250 U2J (EIA) 180 5% GRM21A7U2E221JW31D DC250 U2J (EIA) GRM21A7U2E271JW31D DC250 GRM21A7U2E331JW31D GRM21A7U2E391JW31D Continued on the following page. 167 9 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Continued from the preceding page. 9 Electrode g min. (mm) Electrode e (mm) 1.0 1.5 0.3 min. 1.0 1.5 0.3 min. 1.6 1.0 1.5 0.3 min. 3.2 1.6 1.0 1.5 0.3 min. 22 5% 3.2 1.6 1.0 1.5 0.3 min. 27 5% 3.2 1.6 1.0 1.5 0.3 min. U2J (EIA) 33 5% 3.2 1.6 1.0 1.5 0.3 min. DC1000 U2J (EIA) 39 5% 3.2 1.6 1.0 1.5 0.3 min. GRM31A7U3A470JW31D DC1000 U2J (EIA) 47 5% 3.2 1.6 1.0 1.5 0.3 min. GRM31A7U3A560JW31D DC1000 U2J (EIA) 56 5% 3.2 1.6 1.0 1.5 0.3 min. GRM31A7U3A680JW31D DC1000 U2J (EIA) 68 5% 3.2 1.6 1.0 1.5 0.3 min. GRM31A7U3A820JW31D DC1000 U2J (EIA) 82 5% 3.2 1.6 1.0 1.5 0.3 min. GRM31A7U3A101JW31D DC1000 U2J (EIA) 100 5% 3.2 1.6 1.0 1.5 0.3 min. GRM31A7U3A121JW31D DC1000 U2J (EIA) 120 5% 3.2 1.6 1.0 1.5 0.3 min. GRM31A7U3A151JW31D DC1000 U2J (EIA) 150 5% 3.2 1.6 1.0 1.5 0.3 min. GRM31A7U3A181JW31D DC1000 U2J (EIA) 180 5% 3.2 1.6 1.0 1.5 0.3 min. GRM31A7U3A221JW31D DC1000 U2J (EIA) 220 5% 3.2 1.6 1.0 1.5 0.3 min. GRM31A7U3A271JW31D DC1000 U2J (EIA) 270 5% 3.2 1.6 1.0 1.5 0.3 min. GRM31A7U3A331JW31D DC1000 U2J (EIA) 330 5% 3.2 1.6 1.0 1.5 0.3 min. GRM31B7U3A391JW31L DC1000 U2J (EIA) 390 5% 3.2 1.6 1.25 1.5 0.3 min. GRM31B7U3A471JW31L DC1000 U2J (EIA) 470 5% 3.2 1.6 1.25 1.5 0.3 min. GRM31A7U3D100JW31D DC2000 U2J (EIA) 10 5% 3.2 1.6 1.0 1.8 0.3 min. GRM31A7U3D120JW31D DC2000 U2J (EIA) 12 5% 3.2 1.6 1.0 1.8 0.3 min. GRM31A7U3D150JW31D DC2000 U2J (EIA) 15 5% 3.2 1.6 1.0 1.8 0.3 min. GRM31A7U3D180JW31D DC2000 U2J (EIA) 18 5% 3.2 1.6 1.0 1.8 0.3 min. GRM31A7U3D220JW31D DC2000 U2J (EIA) 22 5% 3.2 1.6 1.0 1.8 0.3 min. GRM31A7U3D270JW31D DC2000 U2J (EIA) 27 5% 3.2 1.6 1.0 1.8 0.3 min. GRM31A7U3D330JW31D DC2000 U2J (EIA) 33 5% 3.2 1.6 1.0 1.8 0.3 min. GRM31A7U3D390JW31D DC2000 U2J (EIA) 39 5% 3.2 1.6 1.0 1.8 0.3 min. GRM31A7U3D470JW31D DC2000 U2J (EIA) 47 5% 3.2 1.6 1.0 1.8 0.3 min. GRM31A7U3D560JW31D DC2000 U2J (EIA) 56 5% 3.2 1.6 1.0 1.8 0.3 min. GRM31A7U3D680JW31D DC2000 U2J (EIA) 68 5% 3.2 1.6 1.0 1.8 0.3 min. GRM32A7U3D820JW31D DC2000 U2J (EIA) 82 5% 3.2 2.5 1.0 1.8 0.3 min. GRM32A7U3D101JW31D DC2000 U2J (EIA) 100 5% 3.2 2.5 1.0 1.8 0.3 min. GRM32A7U3D121JW31D DC2000 U2J (EIA) 120 5% 3.2 2.5 1.0 1.8 0.3 min. GRM32A7U3D151JW31D DC2000 U2J (EIA) 150 5% 3.2 2.5 1.0 1.8 0.3 min. GRM32B7U3D181JW31L DC2000 U2J (EIA) 180 5% 3.2 2.5 1.25 1.8 0.3 min. GRM32B7U3D221JW31L DC2000 U2J (EIA) 220 5% 3.2 2.5 1.25 1.8 0.3 min. GRM42A7U3F270JW31L DC3150 U2J (EIA) 27 5% 4.5 2.0 1.0 2.9 0.3 min. GRM42A7U3F330JW31L DC3150 U2J (EIA) 33 5% 4.5 2.0 1.0 2.9 0.3 min. GRM42A7U3F390JW31L DC3150 U2J (EIA) 39 5% 4.5 2.0 1.0 2.9 0.3 min. GRM42A7U3F470JW31L DC3150 U2J (EIA) 47 5% 4.5 2.0 1.0 2.9 0.3 min. GRM42A7U3F560JW31L DC3150 U2J (EIA) 56 5% 4.5 2.0 1.0 2.9 0.3 min. GRM42A7U3F680JW31L DC3150 U2J (EIA) 68 5% 4.5 2.0 1.0 2.9 0.3 min. GRM42A7U3F820JW31L DC3150 U2J (EIA) 82 5% 4.5 2.0 1.0 2.9 0.3 min. GRM42A7U3F101JW31L DC3150 U2J (EIA) 100 5% 4.5 2.0 1.0 2.9 0.3 min. Part Number Rated Voltage (V) TC Code (Standard) Capacitance (pF) GRM31A7U3A100JW31D DC1000 U2J (EIA) 10 5% 3.2 1.6 GRM31A7U3A120JW31D DC1000 U2J (EIA) 12 5% 3.2 1.6 GRM31A7U3A150JW31D DC1000 U2J (EIA) 15 5% 3.2 GRM31A7U3A180JW31D DC1000 U2J (EIA) 18 5% GRM31A7U3A220JW31D DC1000 U2J (EIA) GRM31A7U3A270JW31D DC1000 U2J (EIA) GRM31A7U3A330JW31D DC1000 GRM31A7U3A390JW31D 168 Length L Width W Thickness T (mm) (mm) (mm) PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Specifications and Test Methods Specifications No. Item Test Method 1 Operating Temperature Range Y55 to W125D 2 Appearance No defects or abnormalities Visual inspection 3 Dimensions Within the specified dimension Using calipers Y 4 Dielectric Strength No defects or abnormalities No failure should be observed when voltage in Table is applied between the terminations for 1 to 5 sec., provided the charge/ discharge current is less than 50mA. Rated Voltage Test Voltage DC250V 200% of the rated voltage DC630V 150% of the rated voltage DC1kV, DC2kV 120% of the rated voltage DC3.15kV DC4095V 5 Insulation Resistance (I.R.) More than 10,000M The insulation resistance should be measured with DC500T50V (DC250T25V in case of rated voltage: DC250V) and within 60T5 sec. of charging. 6 Capacitance Within the specified tolerance 7 Q 1,000 min. Capacitance Temperature Characteristics Temp. Coefficient C0G char. : 0T30ppm/D (Temp. Range : W25 to W125D) 0W30, Y72ppm/D (Temp. Range : Y55 to W25D) U2J char. : Y750T120ppm/D (Temp. Range : W25 to W125D) Y750W120, Y347ppm/D (Temp. Range : Y55 to W25D) 8 9 Adhesive Strength of Termination No removal of the terminations or other defect should occur. The capacitance/Q should be measured at the frequency and voltage shown as follows. Capacitance CF1,000pF CU1,000pF Frequency 1T0.2MHz 1T0.2kHz Voltage AC0.5 to 5V(r.m.s.) AC1T0.2V(r.m.s.) The capacitance measurement should be made at each step specified in Table. Step 1 Temperature (D) 25T2 2 Min. Operating Temp.T3 3 25T2 4 Max. Operating Temp.T2 5 25T2 9 Solder the capacitor to the testing jig (glass epoxy board) shown in Fig. 1. Then apply 10N force in the direction of the arrow. The soldering should be done using the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock. 10N, 10T1s Glass Epoxy Board Fig. 1 10 Appearance No defects or abnormalities Capacitance Within the specified tolerance Q 1,000 min. Vibration Resistance Solder the capacitor to the test jig (glass epoxy board). The capacitor should be subjected to a simple harmonic motion having a total amplitude of 1.5mm, the frequency being varied uniformly between the approximate limits of 10 and 55Hz. The frequency range, from 10 to 55Hz and return to 10Hz, should be traversed in approximately 1 min. This motion should be applied for a period of 2 hrs. in each of 3 mutually perpendicular directions (total of 6 hrs.). Solder resist Cu Glass Epoxy Board Continued on the following page. 169 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Specifications and Test Methods Continued from the preceding page. No. Specifications Item Test Method No cracking or marking defects should occur. b VZ[TX(c)_\W(R)|]ZYUSTWQ,VR^[ Y]^(R)Z 4.5 40 d c Solder the capacitor to the testing jig (glass epoxy board) shown in Fig. 2. Then apply a force in the direction shown in Fig. 3. The soldering should be done using the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock. 20 50 Pressurizing speed : 1.0mm/s Pressurize a 11 Deflection 100 LZW (mm) 2.0Z1.25 3.2Z1.6 3.2Z2.5 4.5Z2.0 t : 1.6 Dimension (mm) b c 4.0 1.65 5.0 2.0 5.0 2.9 7.0 2.4 a 1.2 2.2 2.2 3.5 R230 d Flexure=1 Capacitance meter 1.0 45 Fig. 3 Fig. 2 12 9 Solderability of Termination Resistance 13 to Soldering Heat 14 75% of the terminations are to be soldered evenly and continuously. Appearance No marking defects Capacitance Change Within T2.5% Q 1,000 min. I.R. More than 10,000M Dielectric Strength In accordance with item No.4 Appearance No marking defects Capacitance Change Within T2.5% Q 500 min. I.R. More than 10,000M Dielectric Strength In accordance with item No.4 Temperature Cycle (in mm) 45 Immerse the capacitor in a solution of ethanol (JIS-K-8101) and rosin (JIS-K-5902) (25% rosin in weight proportion). Immerse in solder solution for 2T0.5 sec. Immersing speed: 25T2.5mm/s Temp. of solder: 245T5C Lead Free Solder (Sn-3.0Ag-0.5Cu) 235T5C H60A or H63A Eutectic Solder Preheat the capacitor at 120 to 150D* for 1 min. Immerse the capacitor in solder solution at 260T5D for 10T1 sec. Let sit at room condition* for 24T2 hrs., then measure. #Immersing speed: 25T2.5mm/s *Preheating for more than 3.2Z2.5mm Temperature 100 to 120D 170 to 200D Step 1 2 Time 1 min. 1 min. Fix the capacitor to the supporting jig (glass epoxy board) shown in Fig. 4. Perform the 5 cycles according to the 4 heat treatments listed in the following table. Let sit for 24T2 hrs. at room condition*, then measure. Step 1 2 3 4 Temperature (D) Min. Operating Temp.T3 Room Temp. Max. Operating Temp.T2 Room Temp. Time (min.) 30T3 2 to 3 30T3 2 to 3 Solder resist Cu Glass Epoxy Board Fig. 4 15 16 Humidity (Steady State) Life Appearance No marking defects Capacitance Change Within T5.0% Q 350 min. I.R. More than 1,000M Dielectric Strength In accordance with item No.4 Appearance No marking defects Capacitance Change Within T3.0% Q 350 min. I.R. More than 1,000M Dielectric Strength In accordance with item No.4 Let the capacitor sit at 40T2D and relative humidity of 90 to 95% for 500 W24 Y00 hrs. Remove and let sit for 24T2 hrs. at room condition*, then measure. Apply voltage as Table for 1,000 W48 Y00 hrs. at maximum operating temperature T3D. Remove and let sit for 24T2 hrs. at room condition*, then measure. Rated Voltage DC250V DC630V, DC1kV, DC2kV, DC3.15kV 120% of the rated voltage The charge/discharge current is less than 50mA. * "Room condition" Temperature: 15 to 35D, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa 170 Applied Voltage 150% of the rated voltage PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Chip Monolithic Ceramic Capacitors Medium Voltage High Capacitance for General Use e g e Features T 1. A new monolithic structure for small, high capacitance capable of operating at high voltage levels. 2. Sn-plated external electrodes realizes good solderability. 3. Use the GRM18/21/31 types with flow or reflow soldering, and other types with reflow soldering only. L Part Number GRM188 GRM21A GRM21B GRM31B GRM31C GRM32Q GRM32D GRM43Q GRM43D GRM55D Applications L W Dimensions (mm) W T 1.6 0.1 0.8 0.1 2.0 0.2 1.25 0.2 3.2 0.2 1.6 0.2 3.2 0.3 2.5 0.2 4.5 0.4 3.2 0.3 5.7 0.4 5.0 0.4 e 0.8 0.1 0.2 to 0.5 1.0 +0,-0.3 1.25 0.2 1.25 +0,-0.3 1.6 0.2 1.5 +0,-0.3 0.3 min. 2.0 +0,-0.3 1.5 +0,-0.3 2.0 +0,-0.3 2.0 +0,-0.3 g min. 0.4 0.7 1.2 2.2 3.2 1. Ideal for use on diode-snubber circuits for switching power supplies. 2. Ideal for use as primary-secondary coupling for DC-DC converter. 3. Ideal for use on line filters and ringer detectors for telephones, facsimiles and modems. Do not use these products in any Automotive Power train or Safety equipment including Battery charger for Electric Vehicles and Plug-in Hybrid. Only Murata products clearly stipulated as "for Automotive use" on its catalog can be used for automobile applications such as Power train and Safety equipment. 10 Electrode g min. (mm) Electrode e (mm) 0.8 0.4 0.2 to 0.5 0.8 0.4 0.2 to 0.5 0.8 0.8 0.4 0.2 to 0.5 1.6 0.8 0.8 0.4 0.2 to 0.5 1.6 0.8 0.8 0.4 0.2 to 0.5 1000pF 10% 2.0 1.25 1.0 0.7 0.3 min. X7R (EIA) 1500pF 10% 1.6 0.8 0.8 0.4 0.2 to 0.5 DC250 X7R (EIA) 1500pF 10% 2.0 1.25 1.0 0.7 0.3 min. GRM188R72E222KW07D DC250 X7R (EIA) 2200pF 10% 1.6 0.8 0.8 0.4 0.2 to 0.5 GRM21AR72E222KW01D DC250 X7R (EIA) 2200pF 10% 2.0 1.25 1.0 0.7 0.3 min. GRM21AR72E332KW01D DC250 X7R (EIA) 3300pF 10% 2.0 1.25 1.0 0.7 0.3 min. GRM21AR72E472KW01D DC250 X7R (EIA) 4700pF 10% 2.0 1.25 1.0 0.7 0.3 min. GRM21AR72E682KW01D DC250 X7R (EIA) 6800pF 10% 2.0 1.25 1.0 0.7 0.3 min. GRM21BR72E103KW03L DC250 X7R (EIA) 10000pF 10% 2.0 1.25 1.25 0.7 0.3 min. GRM31BR72E153KW01L DC250 X7R (EIA) 15000pF 10% 3.2 1.6 1.25 1.2 0.3 min. GRM31BR72E223KW01L DC250 X7R (EIA) 22000pF 10% 3.2 1.6 1.25 1.2 0.3 min. GRM31CR72E333KW03L DC250 X7R (EIA) 33000pF 10% 3.2 1.6 1.6 1.2 0.3 min. GRM31CR72E473KW03L DC250 X7R (EIA) 47000pF 10% 3.2 1.6 1.6 1.2 0.3 min. GRM31BR72E683KW01L DC250 X7R (EIA) 68000pF 10% 3.2 1.6 1.25 1.2 0.3 min. GRM32QR72E683KW01L DC250 X7R (EIA) 68000pF 10% 3.2 2.5 1.5 1.2 0.3 min. GRM31CR72E104KW03L DC250 X7R (EIA) 0.10F 10% 3.2 1.6 1.6 1.2 0.3 min. GRM32DR72E104KW01L DC250 X7R (EIA) 0.10F 10% 3.2 2.5 2.0 1.2 0.3 min. GRM32QR72E154KW01L DC250 X7R (EIA) 0.15F 10% 3.2 2.5 1.5 1.2 0.3 min. GRM43QR72E154KW01L DC250 X7R (EIA) 0.15F 10% 4.5 3.2 1.5 2.2 0.3 min. Part Number Rated Voltage (V) TC Code (Standard) Capacitance Length L Width W Thickness T (mm) (mm) (mm) GRM188R72E221KW07D DC250 X7R (EIA) 220pF 10% 1.6 0.8 GRM188R72E331KW07D DC250 X7R (EIA) 330pF 10% 1.6 0.8 GRM188R72E471KW07D DC250 X7R (EIA) 470pF 10% 1.6 GRM188R72E681KW07D DC250 X7R (EIA) 680pF 10% GRM188R72E102KW07D DC250 X7R (EIA) 1000pF 10% GRM21AR72E102KW01D DC250 X7R (EIA) GRM188R72E152KW07D DC250 GRM21AR72E152KW01D Continued on the following page. 171 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Continued from the preceding page. 10 Electrode g min. (mm) Electrode e (mm) 2.0 1.2 0.3 min. 2.0 2.2 0.3 min. 3.2 2.0 2.2 0.3 min. 5.7 5.0 2.0 3.2 0.3 min. 0.47F 10% 4.5 3.2 2.0 2.2 0.3 min. 0.47F 10% 5.7 5.0 2.0 3.2 0.3 min. X7R (EIA) 1.0F 10% 5.7 5.0 2.0 3.2 0.3 min. DC630 X7R (EIA) 1000pF 10% 3.2 1.6 1.25 1.2 0.3 min. GRM31BR72J152KW01L DC630 X7R (EIA) 1500pF 10% 3.2 1.6 1.25 1.2 0.3 min. GRM31BR72J222KW01L DC630 X7R (EIA) 2200pF 10% 3.2 1.6 1.25 1.2 0.3 min. GRM31BR72J332KW01L DC630 X7R (EIA) 3300pF 10% 3.2 1.6 1.25 1.2 0.3 min. GRM31BR72J472KW01L DC630 X7R (EIA) 4700pF 10% 3.2 1.6 1.25 1.2 0.3 min. GRM31BR72J682KW01L DC630 X7R (EIA) 6800pF 10% 3.2 1.6 1.25 1.2 0.3 min. GRM31BR72J103KW01L DC630 X7R (EIA) 10000pF 10% 3.2 1.6 1.25 1.2 0.3 min. GRM31CR72J153KW03L DC630 X7R (EIA) 15000pF 10% 3.2 1.6 1.6 1.2 0.3 min. GRM32QR72J223KW01L DC630 X7R (EIA) 22000pF 10% 3.2 2.5 1.5 1.2 0.3 min. GRM32DR72J333KW01L DC630 X7R (EIA) 33000pF 10% 3.2 2.5 2.0 1.2 0.3 min. GRM32DR72J473KW01L DC630 X7R (EIA) 47000pF 10% 3.2 2.5 2.0 1.2 0.3 min. GRM43QR72J683KW01L DC630 X7R (EIA) 68000pF 10% 4.5 3.2 1.5 2.2 0.3 min. GRM43DR72J104KW01L DC630 X7R (EIA) 0.10F 10% 4.5 3.2 2.0 2.2 0.3 min. GRM55DR72J154KW01L DC630 X7R (EIA) 0.15F 10% 5.7 5.0 2.0 3.2 0.3 min. GRM55DR72J224KW01L DC630 X7R (EIA) 0.22F 10% 5.7 5.0 2.0 3.2 0.3 min. GRM31BR73A471KW01L DC1000 X7R (EIA) 470pF 10% 3.2 1.6 1.25 1.2 0.3 min. GRM31BR73A102KW01L DC1000 X7R (EIA) 1000pF 10% 3.2 1.6 1.25 1.2 0.3 min. GRM31BR73A152KW01L DC1000 X7R (EIA) 1500pF 10% 3.2 1.6 1.25 1.2 0.3 min. GRM31BR73A222KW01L DC1000 X7R (EIA) 2200pF 10% 3.2 1.6 1.25 1.2 0.3 min. GRM31BR73A332KW01L DC1000 X7R (EIA) 3300pF 10% 3.2 1.6 1.25 1.2 0.3 min. GRM31BR73A472KW01L DC1000 X7R (EIA) 4700pF 10% 3.2 1.6 1.25 1.2 0.3 min. GRM32QR73A682KW01L DC1000 X7R (EIA) 6800pF 10% 3.2 2.5 1.5 1.2 0.3 min. GRM32QR73A103KW01L DC1000 X7R (EIA) 10000pF 10% 3.2 2.5 1.5 1.2 0.3 min. GRM32DR73A153KW01L DC1000 X7R (EIA) 15000pF 10% 3.2 2.5 2.0 1.2 0.3 min. GRM32DR73A223KW01L DC1000 X7R (EIA) 22000pF 10% 3.2 2.5 2.0 1.2 0.3 min. GRM43DR73A333KW01L DC1000 X7R (EIA) 33000pF 10% 4.5 3.2 2.0 2.2 0.3 min. GRM43DR73A473KW01L DC1000 X7R (EIA) 47000pF 10% 4.5 3.2 2.0 2.2 0.3 min. GRM55DR73A104KW01L DC1000 X7R (EIA) 0.10F 10% 5.7 5.0 2.0 3.2 0.3 min. Part Number Rated Voltage (V) TC Code (Standard) Capacitance GRM32DR72E224KW01L DC250 X7R (EIA) 0.22F 10% 3.2 2.5 GRM43DR72E224KW01L DC250 X7R (EIA) 0.22F 10% 4.5 3.2 GRM43DR72E334KW01L DC250 X7R (EIA) 0.33F 10% 4.5 GRM55DR72E334KW01L DC250 X7R (EIA) 0.33F 10% GRM43DR72E474KW01L DC250 X7R (EIA) GRM55DR72E474KW01L DC250 X7R (EIA) GRM55DR72E105KW01L DC250 GRM31BR72J102KW01L 172 Length L Width W Thickness T (mm) (mm) (mm) PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Specifications and Test Methods Specifications No. Item Test Method 1 Operating Temperature Range Y55 to W125D 2 Appearance No defects or abnormalities Visual inspection 3 Dimensions Within the specified dimensions Using calipers Y 4 Dielectric Strength No defects or abnormalities No failure should be observed when 150% of the rated voltage (200% of the rated voltage in case of rated voltage: DC250V, 120% of the rated voltage in case of rated voltage: DC1kV) is applied between the terminations for 1 to 5 sec., provided the charge/discharge current is less than 50mA. 5 Insulation Resistance (I.R.) CU0.01F: More than 100M * F CF0.01F: More than 10,000M The insulation resistance should be measured with DC500T50V (DC250T25V in case of rated voltage: DC250V) and within 60T5 sec. of charging. 6 Capacitance Within the specified tolerance 7 Dissipation Factor (D.F.) 0.025 max. The capacitance/D.F. should be measured at a frequency of 1T0.2kHz and a voltage of AC1T0.2V(r.m.s.) The capacitance measurement should be made at each step specified in Table. 8 Capacitance Temperature Characteristics Cap. Change Within T15% (Temp. Range: Y55 to W125D) Step 1 2 3 4 5 Temperature (D) 25T2 Min. Operating Temp.T3 25T2 Max. Operating Temp.T2 25T2 #Pretreatment Perform a heat treatment at 150 W0 Y10 D for 60T5 min. and then let sit for 24T2 hrs. at room condition*. 9 Adhesive Strength of Termination No removal of the terminations or other defect should occur. Solder the capacitor to the testing jig (glass epoxy board) shown in Fig. 1. Then apply 10N force in the direction of the arrow. The soldering should be done using the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock. 10N (5N : Size 1.6g0.8mm only), 10T1s Glass Epoxy Board Fig. 1 10 Appearance No defects or abnormalities Capacitance Within the specified tolerance D.F. 0.025 max. Vibration Resistance Solder the capacitor to the test jig (glass epoxy board). The capacitor should be subjected to a simple harmonic motion having a total amplitude of 1.5mm, the frequency being varied uniformly between the approximate limits of 10 and 55Hz. The frequency range, from 10 to 55Hz and return to 10Hz, should be traversed in approximately 1 min. This motion should be applied for a period of 2 hrs. in each of 3 mutually perpendicular directions (total of 6 hrs.). Solder resist Cu Glass Epoxy Board * "Room condition" Temperature: 15 to 35D, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa Continued on the following page. 173 10 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Specifications and Test Methods Continued from the preceding page. No. Specifications Item Test Method No cracking or marking defects should occur. b VZ[TX(c)_\W(R)|]ZYUSTWQ,VR^[ Y]^(R)Z 4.5 40 d c Solder the capacitor to the testing jig (glass epoxy board) shown in Fig. 2. Then apply a force in the direction shown in Fig. 3. The soldering should be done using the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock. 20 50 Pressurizing speed : 1.0mm/s Pressurize a 100 11 Deflection LZW (mm) 1.6Z0.80 2.0Z1.25 3.2Z1.60 3.2Z2.50 4.5Z3.20 5.7Z5.00 t : 1.6 Dimension (mm) b c 1.25 3.0 1.65 4.0 2.05 5.0 2.95 5.0 3.75 7.0 5.65 8.0 a 1.0 1.2 2.2 2.2 3.5 4.5 R230 d Flexure=1 Capacitance meter 45 45 (in mm) 1.0 Fig. 3 Fig. 2 12 10 Solderability of Termination Resistance 13 to Soldering Heat 75% of the terminations are to be soldered evenly and continuously. Appearance No marking defects Capacitance Change Within T10% D.F. 0.025 max. I.R. CU0.01F: More than 100M * F CF0.01F: More than 10,000M Immerse the capacitor in a solution of ethanol (JIS-K-8101) and rosin (JIS-K-5902) (25% rosin in weight proportion). Immerse in solder solution for 2T0.5 sec. Immersing speed: 25T2.5mm/s Temp. of solder: 245T5C Lead Free Solder (Sn-3.0Ag-0.5Cu) 235T5C H60A or H63A Eutectic Solder Preheat the capacitor at 120 to 150D* for 1 min. Immerse the capacitor in solder solution at 260T5D for 10T1 sec. Let sit at room condition* for 24T2 hrs., then measure. #Immersing speed: 25T2.5mm/s #Pretreatment Perform a heat treatment at 150 W00 Y10 D for 60T5 min. and then let sit for 24T2 hrs. at room condition*. *Preheating for more than 3.2Z2.5mm 14 Dielectric Strength In accordance with item No.4 Appearance No marking defects Capacitance Change Within T7.5% D.F. 0.025 max. I.R. CU0.01F: More than 100M * F CF0.01F: More than 10,000M Temperature Cycle Temperature 100 to 120D 170 to 200D Step 1 2 Time 1 min. 1 min. Fix the capacitor to the supporting jig (glass epoxy board) shown in Fig. 4. Perform the 5 cycles according to the 4 heat treatments listed in the following table. Let sit for 24T2 hrs. at room condition*, then measure. Time (min.) Temperature (D) Step 1 Min. Operating Temp.T3 30T3 2 Room Temp. 2 to 3 3 Max. Operating Temp.T2 30T3 4 Room Temp. 2 to 3 #Pretreatment Perform a heat treatment at 150 W00 Y10 D for 60T5 min. and then let sit for 24T2 hrs. at room condition*. Dielectric Strength In accordance with item No.4 Solder resist Cu Glass Epoxy Board Fig. 4 15 Humidity (Steady State) Appearance No marking defects Capacitance Change Within T15% D.F. 0.05 max. I.R. CU0.01F: More than 10M * F CF0.01F: More than 1,000M Dielectric Strength In accordance with item No.4 Let the capacitor sit at 40T2D and relative humidity of 90 to 95% for 500 W24 Y00 hrs. Remove and let sit for 24T2 hrs. at room condition*, then measure. #Pretreatment Perform a heat treatment at 150 W00 Y10 D for 60T5 min. and then let sit for 24T2 hrs. at room condition*. * "Room condition" Temperature: 15 to 35D, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa Continued on the following page. 174 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Specifications and Test Methods Continued from the preceding page. No. 16 17 Specifications Item Life Humidity Loading (Application: DC250V, DC630V item) Appearance No marking defects Capacitance Change Within T15% (rated voltage: DC250V, DC630V) Within T20% (rated voltage: DC1kV) D.F. 0.05 max. I.R. CU0.01F: More than 10M * F CF0.01F: More than 1,000M Dielectric Strength In accordance with item No.4 Appearance No marking defects Capacitance Change Within T15% D.F. 0.05 max. I.R. CU0.01F: More than 10M * F CF0.01F: More than 1,000M Dielectric Strength In accordance with item No.4 Test Method Apply 120% of the rated voltage (150% of the rated voltage in case of rated voltage: DC250V, 110% of the rated voltage in case of rated voltage: DC1kV) for 1,000 W48 Y00 hrs. at maximum operating temperature T3D. Remove and let sit for 24T2 hrs. at room condition*, then measure. The charge/discharge current is less than 50mA. #Pretreatment Apply test voltage for 60T5 min. at test temperature. Remove and let sit for 24T2 hrs. at room condition*. Apply the rated voltage at 40T2D and relative humidity of 90 to 95% for 500 W24 Y00 hrs. Remove and let sit for 24T2 hrs. at room condition*, then measure. #Pretreatment Apply test voltage for 60T5 min. at test temperature. Remove and let sit for 24T2 hrs. at room condition*. * "Room condition" Temperature: 15 to 35D, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa 10 175 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Chip Monolithic Ceramic Capacitors Only for LCD Backlight Inverter Circuit Features e g e T 1. Low-loss and suitable for high frequency circuits 2. Murata's original internal electrode structure realizes high flash-over voltage. 3. A new monolithic structure for small, surfacemountable devices capable of operating at high voltage levels. 4. Sn-plated external electrodes realize good solderability. 5. Only for reflow soldering 6. The capacitors less than 22pF can be applied maximum 4.0kV peak to peak at 100kHz or less only for the ballast or the resonance usage in the LCD backlight inverter circuit. L Part Number GRM42A L 4.5 0.3 W Dimensions (mm) W T e min. 2.0 0.2 1.0 +0, - 0.3 0.3 g min. 2.9 Applications Ideal for use as the ballast in LCD backlight inverter. 11 Do not use these products in any Automotive Power train or Safety equipment including Battery charger for Electric Vehicles and Plug-in Hybrid. Only Murata products clearly stipulated as "for Automotive use" on its catalog can be used for automobile applications such as Power train and Safety equipment. Electrode g min. (mm) Electrode e (mm) 1.0 2.9 0.3 min. 1.0 2.9 0.3 min. 2.0 1.0 2.9 0.3 min. 2.0 1.0 2.9 0.3 min. 4.5 2.0 1.0 2.9 0.3 min. 22 5% 4.5 2.0 1.0 2.9 0.3 min. C0G (EIA) 27 5% 4.5 2.0 1.0 2.9 0.3 min. DC3150 C0G (EIA) 33 5% 4.5 2.0 1.0 2.9 0.3 min. DC3150 C0G (EIA) 39 5% 4.5 2.0 1.0 2.9 0.3 min. DC3150 C0G (EIA) 47 5% 4.5 2.0 1.0 2.9 0.3 min. Part Number Rated Voltage (V) TC Code (Standard) Capacitance (pF) GRM42A5C3F050DW01L DC3150 C0G (EIA) 5.0 0.5pF 4.5 2.0 GRM42A5C3F100JW01L DC3150 C0G (EIA) 10 5% 4.5 2.0 GRM42A5C3F120JW01L DC3150 C0G (EIA) 12 5% 4.5 GRM42A5C3F150JW01L DC3150 C0G (EIA) 15 5% 4.5 GRM42A5C3F180JW01L DC3150 C0G (EIA) 18 5% GRM42A5C3F220JW01L DC3150 C0G (EIA) GRM42A5C3F270JW01L DC3150 GRM42A5C3F330JW01L GRM42A5C3F390JW01L GRM42A5C3F470JW01L 176 Length L Width W Thickness T (mm) (mm) (mm) PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Specifications and Test Methods Specifications No. Item Test Method 1 Operating Temperature Range Y55 to W125D 2 Appearance No defects or abnormalities Visual inspection 3 Dimensions Within the specified dimension Using calipers 4 Dielectric Strength No defects or abnormalities No failure should be observed when DC4095V is applied between the terminations for 1 to 5 sec., provided the charge/ discharge current is less than 50mA. 5 Insulation Resistance (I.R.) More than 10,000M The insulation resistance should be measured with DC500T50V and within 60T5 sec. of charging. 6 Capacitance Within the specified tolerance 7 Q 1,000 min. Y The capacitance/Q should be measured at a frequency of 1T0.2MHz and a voltage of AC0.5 to 5V(r.m.s.) The capacitance measurement should be made at each step specified in Table. 8 9 Capacitance Temperature Characteristics Adhesive Strength of Termination Step 1 2 3 4 5 Temp. Coefficient 0T30ppm/D (Temp. Range: W25 to W125D) 0W30, Y72ppm/D (Temp. Range: Y55 to W25D) No removal of the terminations or other defect should occur. Temperature (D) 25T2 Min. Operating Temp.T3 25T2 Max. Operating Temp.T2 25T2 Solder the capacitor to the testing jig (glass epoxy board) shown in Fig. 1. Then apply 10N force in the direction of the arrow. The soldering should be done using the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock. 10N, 10T1s Glass Epoxy Board Fig. 1 10 Appearance No defects or abnormalities Capacitance Within the specified tolerance Q 1,000 min. Solder the capacitor to the test jig (glass epoxy board). The capacitor should be subjected to a simple harmonic motion having a total amplitude of 1.5mm, the frequency being varied uniformly between the approximate limits of 10 and 55Hz. The frequency range, from 10 to 55Hz and return to 10Hz, should be traversed in approximately 1 min. This motion should be applied for a period of 2 hrs. in each of 3 mutually perpendicular directions (total of 6 hrs.). Vibration Resistance Solder resist Cu Glass Epoxy Board No cracking or marking defects should occur. b VZ[TX(c)_\W(R)|]ZYUSTWQ,VR^[ Y]^(R)Z 4.5 40 d c Solder the capacitor to the testing jig (glass epoxy board) shown in Fig. 2. Then apply a force in the direction shown in Fig. 3. The soldering should be done using the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock. 20 50 Pressurizing speed : 1.0mm/s Pressurize a 11 Deflection 100 LZW (mm) 4.5Z2.0 a 3.5 t : 1.6 Dimension (mm) b c 7.0 2.4 Fig. 2 R230 d 1.0 Flexure=1 Capacitance meter 45 45 (in mm) Fig. 3 Continued on the following page. 177 11 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Specifications and Test Methods Continued from the preceding page. No. 12 Solderability of Termination Resistance 13 to Soldering Heat 14 Specifications Item 75% of the terminations are to be soldered evenly and continuously. Appearance No marking defects Capacitance Change Within T2.5% Q 1,000 min. I.R. More than 10,000M Dielectric Strength In accordance with item No.4 Appearance No marking defects Capacitance Change Within T2.5% Q 1,000 min. I.R. More than 10,000M Dielectric Strength In accordance with item No.4 Temperature Cycle Test Method Immerse the capacitor in a solution of ethanol (JIS-K-8101) and rosin (JIS-K-5902) (25% rosin in weight proportion). Immerse in solder solution for 2T0.5 sec. Immersing speed: 25T2.5mm/s Temp. of solder: 245T5C Lead Free Solder (Sn-3.0Ag-0.5Cu) 235T5C H60A or H63A Eutectic Solder Preheat the capacitor as table. Immerse the capacitor in solder solution at 260T5D for 10T1 sec. Let sit at room condition* for 24T2 hrs., then measure. #Immersing speed: 25T2.5mm/s *Preheating Step 1 2 Temperature 100 to 120D 170 to 200D Time 1 min. 1 min. Fix the capacitor to the supporting jig (glass epoxy board) shown in Fig. 4. Perform the 5 cycles according to the 4 heat treatments listed in the following table. Let sit for 24T2 hrs. at room condition*, then measure. Step 1 2 3 4 Temperature (D) Min. Operating Temp.T3 Room Temp. Max. Operating Temp.T2 Room Temp. Time (min.) 30T3 2 to 3 30T3 2 to 3 Solder resist Cu Glass Epoxy Board Fig. 4 11 15 16 Humidity (Steady State) Life Appearance No marking defects Capacitance Change Within T5.0% Q 350 min. I.R. More than 1,000M Dielectric Strength In accordance with item No.4 Appearance No marking defects Capacitance Change Within T3.0% Q 350 min. I.R. More than 1,000M Dielectric Strength In accordance with item No.4 Let the capacitor sit at 40T2D and relative humidity of 90 to 95% for 500 W24 Y00 hrs. Remove and let sit for 24T2 hrs. at room condition*, then measure. Apply 120% of the rated voltage for 1,000 W48 Y00 hrs. at maximum operating temperature T3D. Remove and let sit for 24T2 hrs. at room condition*, then measure. The charge/discharge current is less than 50mA. * "Room condition" Temperature: 15 to 35D, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa 178 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Chip Monolithic Ceramic Capacitors Only for Information Devices 0.3 min. g 0.3 min. Features T 1. These items are designed specifically for telecommunications devices (IEEE802.3) in Ethernet LAN and primary-secondary coupling for DC-DC converter. 2. A new monolithic structure for small, high capacitance capable of operating at high voltage levels 3. Sn-plated external electrodes realizes good solderability. 4. Only for reflow soldering 5. The low-profile type (thickness: 1.5mm max.) is available. Fit for use on thinner type equipment. L Part Number GR442Q GR443D GR443Q GR455D L 4.5 0.3 4.5 0.4 5.7 0.4 W Dimensions (mm) W T 2.0 0.2 1.5 +0, -0.3 2.0 +0, -0.3 3.2 0.3 1.5 +0, -0.3 5.0 0.4 2.0 +0, -0.3 g min. 2.5 3.2 Applications 1. Ideal for use on telecommunications devices in Ethernet LAN 2. Ideal for use as primary-secondary coupling for DC-DC converter Do not use these products in any Automotive Power train or Safety equipment including Battery charger for Electric Vehicles and Plug-in Hybrid. Only Murata products clearly stipulated as "for Automotive use" on its catalog can be used for automobile applications such as Power train and Safety equipment. 12 Electrode g min. (mm) Electrode e (mm) 1.5 2.5 0.3 min. 2.0 1.5 2.5 0.3 min. 2.0 1.5 2.5 0.3 min. 4.5 2.0 1.5 2.5 0.3 min. 220 10% 4.5 2.0 1.5 2.5 0.3 min. X7R (EIA) 270 10% 4.5 2.0 1.5 2.5 0.3 min. DC2000 X7R (EIA) 330 10% 4.5 2.0 1.5 2.5 0.3 min. DC2000 X7R (EIA) 390 10% 4.5 2.0 1.5 2.5 0.3 min. GR442QR73D471KW01L DC2000 X7R (EIA) 470 10% 4.5 2.0 1.5 2.5 0.3 min. GR442QR73D561KW01L DC2000 X7R (EIA) 560 10% 4.5 2.0 1.5 2.5 0.3 min. GR442QR73D681KW01L DC2000 X7R (EIA) 680 10% 4.5 2.0 1.5 2.5 0.3 min. GR442QR73D821KW01L DC2000 X7R (EIA) 820 10% 4.5 2.0 1.5 2.5 0.3 min. GR442QR73D102KW01L DC2000 X7R (EIA) 1000 10% 4.5 2.0 1.5 2.5 0.3 min. GR442QR73D122KW01L DC2000 X7R (EIA) 1200 10% 4.5 2.0 1.5 2.5 0.3 min. GR442QR73D152KW01L DC2000 X7R (EIA) 1500 10% 4.5 2.0 1.5 2.5 0.3 min. GR443QR73D182KW01L DC2000 X7R (EIA) 1800 10% 4.5 3.2 1.5 2.5 0.3 min. GR443QR73D222KW01L DC2000 X7R (EIA) 2200 10% 4.5 3.2 1.5 2.5 0.3 min. GR443QR73D272KW01L DC2000 X7R (EIA) 2700 10% 4.5 3.2 1.5 2.5 0.3 min. GR443QR73D332KW01L DC2000 X7R (EIA) 3300 10% 4.5 3.2 1.5 2.5 0.3 min. GR443QR73D392KW01L DC2000 X7R (EIA) 3900 10% 4.5 3.2 1.5 2.5 0.3 min. GR443DR73D472KW01L DC2000 X7R (EIA) 4700 10% 4.5 3.2 2.0 2.5 0.3 min. GR455DR73D103KW01L DC2000 X7R (EIA) 10000 10% 5.7 5.0 2.0 3.2 0.3 min. Part Number Rated Voltage (V) TC Code (Standard) Capacitance (pF) Length L Width W Thickness T (mm) (mm) (mm) GR442QR73D101KW01L DC2000 X7R (EIA) 100 10% 4.5 2.0 GR442QR73D121KW01L DC2000 X7R (EIA) 120 10% 4.5 GR442QR73D151KW01L DC2000 X7R (EIA) 150 10% 4.5 GR442QR73D181KW01L DC2000 X7R (EIA) 180 10% GR442QR73D221KW01L DC2000 X7R (EIA) GR442QR73D271KW01L DC2000 GR442QR73D331KW01L GR442QR73D391KW01L 179 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Specifications and Test Methods Specifications No. Item Test Method 1 Operating Temperature Range Y55 to W125D 2 Appearance No defects or abnormalities Visual inspection 3 Dimensions Within the specified dimensions Using calipers Y No failure should be observed when voltage in table is applied between the terminations, provided the charge/discharge current is less than 50mA. 4 Dielectric Strength No defects or abnormalities Test Voltage 120% of the rated voltage AC1500V(r.m.s.) Rated Voltage DC2kV 5 Pulse Voltage No self healing breakdowns or flash-overs have taken place in the capacitor. 6 Insulation Resistance (I.R.) More than 6,000M 7 Capacitance Within the specified tolerance 8 Dissipation Factor (D.F.) 0.025 max. Time 60T1 sec. 60T1 sec. 10 impulse of alternating polarity is subjected. (5 impulse for each polarity) The interval between impulse is 60 sec. Applied Voltage: 2.5kV zero to peak The insulation resistance should be measured with DC500T50V and within 60T5 sec. of charging. The capacitance/D.F. should be measured at a frequency of 1T0.2kHz and a voltage of AC1T0.2V(r.m.s.) The capacitance measurement should be made at each step specified in Table. 9 Capacitance Temperature Characteristics Cap. Change within T15% (Temp. Range: Y55 to W125D) Step 1 2 3 4 5 Temperature (D) 25T2 Min. Operating Temp.T3 25T2 Max. Operating Temp.T2 25T2 #Pretreatment Perform a heat treatment at 150 W0 Y10 D for 60T5 min. and then let sit for 24T2 hrs. at room condition*. 12 10 Adhesive Strength of Termination No removal of the terminations or other defect should occur. Solder the capacitor to the testing jig (glass epoxy board) shown in Fig. 1. Then apply 10N force in the direction of the arrow. The soldering should be done using the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock. 10N, 10T1s Glass Epoxy Board Fig. 1 11 Appearance No defects or abnormalities Capacitance Within the specified tolerance D.F. 0.025 max. Vibration Resistance Solder the capacitor to the test jig (glass epoxy board). The capacitor should be subjected to a simple harmonic motion having a total amplitude of 1.5mm, the frequency being varied uniformly between the approximate limits of 10 and 55Hz. The frequency range, from 10 to 55Hz and return to 10Hz, should be traversed in approximately 1 min. This motion should be applied for a period of 2 hrs. in each of 3 mutually perpendicular directions (total of 6 hrs.). Solder resist Cu Glass Epoxy Board * "Room condition" Temperature: 15 to 35D, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa Continued on the following page. 180 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Specifications and Test Methods Continued from the preceding page. No. Specifications Item Test Method No cracking or marking defects should occur. b VZ[TX(c)_\W(R)|]ZYUSTWQ,VR^[ Y]^(R)Z 4.5 40 d c Solder the capacitor to the testing jig (glass epoxy board) shown in Fig. 2. Then apply a force in the direction shown in Fig. 3. The soldering should be done using the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock. a 12 100 Deflection LZW (mm) 4.5Z2.0 4.5Z3.2 5.7Z5.0 Dimension (mm) b c 2.4 7.0 3.7 7.0 5.6 8.0 a 3.5 3.5 4.5 20 50 Pressurizing speed : 1.0mm/s Pressurize t : 1.6 R230 d Flexure=1 1.0 Capacitance meter 45 45 Fig. 2 (in mm) Fig. 3 13 Solderability of Termination Resistance 14 to Soldering Heat 75% of the terminations are to be soldered evenly and continuously. Appearance No marking defects Capacitance Change Within T10% D.F. 0.025 max. I.R. More than 1,000M Dielectric Strength In accordance with item No.4 Appearance No marking defects Capacitance Change Within T15% D.F. 0.05 max. I.R. More than 3,000M Immerse the capacitor in a solution of ethanol (JIS-K-8101) and rosin (JIS-K-5902) (25% rosin in weight proportion). Immerse in solder solution for 2T0.5 sec. Immersing speed: 25T2.5mm/s Temp. of solder: 245T5C Lead Free Solder (Sn-3.0Ag-0.5Cu) 235T5C H60A or H63A Eutectic Solder Preheat the capacitor as table. Immerse the capacitor in solder solution at 260T5D for 10T1 sec. Let sit at room condition* for 24T2 hrs., then measure. #Immersing speed: 25T2.5mm/s #Pretreatment Perform a heat treatment at 150 W00 Y10 D for 60T5 min. and then let sit for 24T2 hrs. at room condition*. *Preheating 15 Temperature Cycle Dielectric Strength Temperature 100 to 120D 170 to 200D Step 1 2 Time 1 min. 1 min. Fix the capacitor to the supporting jig (glass epoxy board) shown in Fig. 4. Perform the 5 cycles according to the 4 heat treatments listed in the following table. Let sit for 24T2 hrs. at room condition*, then measure. Time (min.) Temperature (D) Step 1 Min. Operating Temp.T3 30T3 2 Room Temp. 2 to 3 3 Max. Operating Temp.T2 30T3 4 Room Temp. 2 to 3 #Pretreatment Perform a heat treatment at 150 W00 Y10 D for 60T5 min. and then let sit for 24T2 hrs. at room condition*. In accordance with item No.4 Solder resist Cu Glass Epoxy Board Fig. 4 16 Humidity (Steady State) Appearance No marking defects Capacitance Change Within T15% D.F. 0.05 max. I.R. More than 1,000M Dielectric Strength In accordance with item No.4 Let the capacitor sit at 40T2D and relative humidity of 90 to 95% for 500 W24 Y00 hrs. Remove and let sit for 24T2 hrs. at room condition*, then measure. #Pretreatment Perform a heat treatment at 150 W00 Y10 D for 60T5 min. and then let sit for 24T2 hrs. at room condition*. * "Room condition" Temperature: 15 to 35D, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa Continued on the following page. 181 12 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Specifications and Test Methods Continued from the preceding page. No. 17 Specifications Item Life Appearance No marking defects Capacitance Change Within T20% D.F. 0.05 max. I.R. More than 2,000M Dielectric Strength In accordance with item No.4 Test Method Apply 110% of the rated voltage for 1,000 W48 Y00 hrs. at maximum operating temperature T3D. Remove and let sit for 24T2 hrs. at room condition*, then measure. The charge/discharge current is less than 50mA. #Pretreatment Apply test voltage for 60T5 min. at test temperature. Remove and let sit for 24T2 hrs. at room condition*. * "Room condition" Temperature: 15 to 35D, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa 12 182 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Chip Monolithic Ceramic Capacitors Only for Camera Flash Circuit 0.3 min. g 0.3 min. Features T 1. Suitable for the trigger of the flash circuit, because real capacitance is stable during operating voltage. 2. The thin type fit for thinner camera. 3. Sn-plated external electrodes realizes good solderability. 4. For flow and reflow soldering L Part Number GR731A GR731B GR731C Applications For strobe circuit L 3.2 0.2 W Dimensions (mm) W T 1.0 +0, -0.3 1.6 0.2 1.25 +0, -0.3 1.6 0.2 g min. 1.2 Do not use these products in any Automotive Power train or Safety equipment including Battery charger for Electric Vehicles and Plug-in Hybrid. Only Murata products clearly stipulated as Agfor Automotive useAh on its catalog can be used for automobile applications such as Power train and Safety equipment. Electrode g min. (mm) Electrode e (mm) 1.0 1.2 0.3 min. 1.0 1.2 0.3 min. 1.6 1.25 1.2 0.3 min. 3.2 1.6 1.25 1.2 0.3 min. 3.2 1.6 1.6 1.2 0.3 min. Part Number Rated Voltage (V) TC Code (Standard) Capacitance (pF) Length L Width W Thickness T (mm) (mm) (mm) GR731AW0BB103KW01D DC350 - 10000 10% 3.2 1.6 GR731AW0BB153KW01D DC350 - 15000 10% 3.2 1.6 GR731BW0BB223KW01L DC350 - 22000 10% 3.2 GR731BW0BB333KW01L DC350 - 33000 10% GR731CW0BB473KW03L DC350 - 47000 10% 13 183 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Specifications and Test Methods Specifications No. Item Test Method 1 Operating Temperature Range Y55 to W125D 2 Appearance No defects or abnormalities Visual inspection 3 Dimensions Within the specified dimensions Using calipers 4 Dielectric Strength No defects or abnormalities No failure should be observed when DC500V is applied between the terminations for 1 to 5 sec., provided the charge/discharge current is less than 50mA. 5 Insulation Resistance (I.R.) CU0.01F: More than 100M * F CF0.01F: More than 10,000M The insulation resistance should be measured with DC250T50V and within 60T5 sec. of charging. 6 Capacitance Within the specified tolerance 7 Dissipation Factor (D.F.) 0.025 max. Y The capacitance/D.F. should be measured at a frequency of 1T0.2kHz and a voltage of AC1T0.2V(r.m.s.) The capacitance measurement should be made at each step specified in Table. 8 Capacitance Temperature Characteristics Cap. Change Within T10% (Apply DC350V bias) Within W22 Y33 % (No DC bias) (Temp. Range : Y55 to W125D) Step 1 2 3 4 5 Temperature (D) 25T2 Min. Operating Temp.T3 25T2 Max. Operating Temp.T2 25T2 #Pretreatment Perform a heat treatment at 150 W0 Y10 D for 60T5 min. and then let sit for 24T2 hrs. at room condition*. 9 Adhesive Strength of Termination No removal of the terminations or other defect should occur. Solder the capacitor to the testing jig (glass epoxy board) shown in Fig. 1. Then apply 10N force in the direction of the arrow. The soldering should be done using the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock. 10N, 10T1s Glass Epoxy Board Fig. 1 Appearance No defects or abnormalities Capacitance Within the specified tolerance D.F. 0.025 max. 13 10 Vibration Resistance Solder the capacitor to the test jig (glass epoxy board). The capacitor should be subjected to a simple harmonic motion having a total amplitude of 1.5mm, the frequency being varied uniformly between the approximate limits of 10 and 55Hz. The frequency range, from 10 to 55Hz and return to 10Hz, should be traversed in approximately 1 min. This motion should be applied for a period of 2 hrs. in each of 3 mutually perpendicular directions (total of 6 hrs.). Solder resist Cu Glass Epoxy Board * "Room condition" Temperature: 15 to 35D, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa Continued on the following page. 184 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Specifications and Test Methods Continued from the preceding page. No. Specifications Item Test Method No cracking or marking defects should occur. b VZ[TX(c)_\W(R)|]ZYUSTWQ,VR^[ Y]^(R)Z 4.5 40 d c Solder the capacitor to the testing jig (glass epoxy board) shown in Fig. 2. Then apply a force in the direction shown in Fig. 3. The soldering should be done using the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock. 20 50 Pressurizing speed: 1.0mm/s Pressurize a 11 Deflection 100 LZW (mm) 3.2Z1.6 t : 1.6 Dimension (mm) b c 5.0 2.0 a 2.2 R230 d 1.0 Flexure=1 Capacitance meter Fig. 2 45 45 (in mm) Fig. 3 12 Solderability of Termination Resistance 13 to Soldering Heat 14 75% of the terminations are to be soldered evenly and continuously. Appearance No marking defects Capacitance Change Within T10% D.F. 0.025 max. I.R. CU0.01F: More than 100M * F CF0.01F: More than 10,000M Dielectric Strength In accordance with item No.4 Appearance No marking defects Capacitance Change Within T7.5% D.F. 0.025 max. I.R. CU0.01F: More than 100M * F CF0.01F: More than 10,000M Temperature Cycle Immerse the capacitor in a solution of ethanol (JIS-K-8101) and rosin (JIS-K-5902) (25% rosin in weight proportion). Immerse in solder solution for 2T0.5 sec. Immersing speed: 25T2.5mm/s Temp. of solder: 245T5C Lead Free Solder (Sn-3.0Ag-0.5Cu) 235T5C H60A or H63A Eutectic Solder Preheat the capacitor at 120 to 150D* for 1 min. Immerse the capacitor in solder solution at 260T5D for 10T1 sec. Let sit at room condition* for 24T2 hrs., then measure. #Immersing speed: 25T2.5mm/s #Pretreatment Perform a heat treatment at 150 W00 Y10 D for 60T5 min. and then let sit for 24T2 hrs. at room condition*. Fix the capacitor to the supporting jig (glass epoxy board) shown in Fig. 4. Perform the 5 cycles according to the 4 heat treatments listed in the following table. Let sit for 24T2 hrs. at room condition*, then measure. Time (min.) Temperature (D) Step 1 Min. Operating Temp.T3 30T3 2 Room Temp. 2 to 3 3 Max. Operating Temp.T2 30T3 4 Room Temp. 2 to 3 #Pretreatment Perform a heat treatment at 150 W00 Y10 D for 60T5 min. and then let sit for 24T2 hrs. at room condition*. Dielectric Strength In accordance with item No.4 Solder resist Cu Glass Epoxy Board Fig. 4 15 Humidity (Steady State) Appearance No marking defects Capacitance Change Within T15% D.F. 0.05 max. I.R. CU0.01F: More than 10M * F CF0.01F: More than 1,000M Dielectric Strength In accordance with item No.4 Let the capacitor sit at 40T2D and relative humidity of 90 to 95% for 500 W24 Y00 hrs. Remove and let sit for 24T2 hrs. at room condition*, then measure. #Pretreatment Perform a heat treatment at 150 W00 Y10 D for 60T5 min. and then let sit for 24T2 hrs. at room condition*. * "Room condition" Temperature: 15 to 35D, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa Continued on the following page. 185 13 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Specifications and Test Methods Continued from the preceding page. No. 16 17 Specifications Item Life Humidity Loading Appearance No marking defects Capacitance Change Within T15% D.F. 0.05 max. I.R. CU0.01F: More than 10M * F CF0.01F: More than 1,000M Dielectric Strength In accordance with item No.4 Appearance No marking defects Capacitance Change Within T15% D.F. 0.05 max. I.R. CU0.01F: More than 10M * F CF0.01F: More than 1,000M Dielectric Strength In accordance with item No.4 Test Method Apply DC350V for 1,000 W48 Y00 hrs. at maximum operating temperature T3D. Remove and let sit for 24T2 hrs. at room condition*, then measure. The charge/discharge current is less than 50mA. #Pretreatment Apply test voltage for 60T5 min. at test temperature. Remove and let sit for 24T2 hrs. at room condition*. Apply the rated voltage at 40T2D and relative humidity of 90 to 95% for 500 W24 Y00 hrs. Remove and let sit for 24T2 hrs. at room condition*, then measure. #Pretreatment Apply test voltage for 60T5 min. at test temperature. Remove and let sit for 24T2 hrs. at room condition*. * "Room condition" Temperature: 15 to 35D, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa 13 186 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Chip Monolithic Ceramic Capacitors AC250V (r.m.s.) Type (Which Meet Japanese Law) e g e Features T 1. Chip monolithic ceramic capacitor for AC lines. 2. A new monolithic structure for small, high capacitance capable of operating at high voltage levels. 3. Sn-plated external electrodes realizes good solderability. 4. Only for reflow soldering 5. Capacitance 0.01 to 0.1uF for connecting lines and 470 to 4700pF for connecting lines to earth. L Part Number GA242Q GA243D GA243Q GA255D L 4.5 0.3 4.5 0.4 5.7 0.4 W Dimensions (mm) W T e min. 2.0 0.2 1.5 +0, -0.3 2.0 +0, -0.3 3.2 0.3 0.3 1.5 +0, -0.3 5.0 0.4 2.0 +0, -0.3 g min. 2.5 3.2 Applications Noise suppression filters for switching power supplies, telephones, facsimiles, modems. Do not use these products in any Automotive Power train or Safety equipment including Battery charger for Electric Vehicles and Plug-in Hybrid. Only Murata products clearly stipulated as "for Automotive use" on its catalog can be used for automobile applications such as Power train and Safety equipment. Reference Standard GA2 series obtains no safety approval. This series is based on the standards of the electrical appliance and material safety law of Japan (separated table 4). Electrode g min. (mm) Electrode e (mm) 1.5 2.5 0.3 min. 1.5 2.5 0.3 min. 3.2 1.5 2.5 0.3 min. 4.5 3.2 1.5 2.5 0.3 min. 4.5 3.2 2.0 2.5 0.3 min. 10000pF 20% 4.5 3.2 1.5 2.5 0.3 min. 22000pF 20% 4.5 3.2 1.5 2.5 0.3 min. X7R (EIA) 47000pF 20% 4.5 3.2 2.0 2.5 0.3 min. X7R (EIA) 0.10F 20% 5.7 5.0 2.0 3.2 0.3 min. Part Number Rated Voltage (V) TC Code (Standard) GA242QR7E2471MW01L AC250 (r.m.s.) X7R (EIA) 470pF 20% 4.5 2.0 GA242QR7E2102MW01L AC250 (r.m.s.) X7R (EIA) 1000pF 20% 4.5 2.0 GA243QR7E2222MW01L AC250 (r.m.s.) X7R (EIA) 2200pF 20% 4.5 GA243QR7E2332MW01L AC250 (r.m.s.) X7R (EIA) 3300pF 20% GA243DR7E2472MW01L AC250 (r.m.s.) X7R (EIA) 4700pF 20% GA243QR7E2103MW01L AC250 (r.m.s.) X7R (EIA) GA243QR7E2223MW01L AC250 (r.m.s.) X7R (EIA) GA243DR7E2473MW01L AC250 (r.m.s.) GA255DR7E2104MW01L AC250 (r.m.s.) Capacitance Length L Width W Thickness T (mm) (mm) (mm) 187 14 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Specifications and Test Methods Specifications No. Item Test Method 1 Operating Temperature Range Y55 to W125D 2 Appearance No defects or abnormalities Visual inspection 3 Dimensions Within the specified dimensions Using calipers Y 4 Dielectric Strength No defects or abnormalities No failure should be observed when voltage in table is applied between the terminations for 60T1 sec., provided the charge/discharge current is less than 50mA. Nominal Capacitance Test Voltage CU10,000pF AC575V (r.m.s.) CF10,000pF AC1500V (r.m.s.) 5 Insulation Resistance (I.R.) More than 2,000M The insulation resistance should be measured with DC500T50V and within 60T5 sec. of charging. 6 Capacitance Within the specified tolerance 7 Dissipation Factor (D.F.) 0.025 max. The capacitance/D.F. should be measured at a frequency of 1T0.2kHz and a voltage of AC1T0.2V (r.m.s.) The capacitance measurement should be made at each step specified in Table. 8 Capacitance Temperature Characteristics Cap. Change Within T15% (Temp. Range: Y55 to W125D) Step 1 2 3 4 5 Temperature (D) 25T2 Min. Operating Temp.T3 25T2 Max. Operating Temp.T2 25T2 #Pretreatment Perform a heat treatment at 150 W00 Y10 D for 60T5 min. and then let sit for 24T2 hrs. at room condition*. As in Fig., discharge is made 50 times at 5 sec. intervals from the capacitor (Cd) charged at DC voltage of specified. 9 Discharge Test (Application: Nominal Capacitance CF10,000pF) R3 Appearance R1 No defects or abnormalities 10kV V Ct R2 Cd Ct: Capacitor under test Cd: 0.001F R1: 1,000 R2: 100M R3: Surge resistance 14 10 Adhesive Strength of Termination No removal of the terminations or other defects should occur. Solder the capacitor to the testing jig (glass epoxy board) shown in Fig. 1. Then apply 10N force in the direction of the arrow. The soldering should be done using the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock. 10N, 10T1s Glass Epoxy Board Fig. 1 11 Appearance No defects or abnormalities Capacitance Within the specified tolerance D.F. 0.025 max. Vibration Resistance Solder the capacitor to the test jig (glass epoxy board). The capacitor should be subjected to a simple harmonic motion having a total amplitude of 1.5mm, the frequency being varied uniformly between the approximate limits of 10 and 55Hz. The frequency range, from 10 to 55Hz and return to 10Hz, should be traversed in approximately 1 min. This motion should be applied for a period of 2 hrs. in each of 3 mutually perpendicular directions (total of 6 hrs.). Solder resist Cu Glass Epoxy Board * "Room condition" Temperature: 15 to 35D, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa Continued on the following page. 188 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Specifications and Test Methods Continued from the preceding page. No. Specifications Item Test Method No cracking or marking defects should occur. b VZ[TX(c)_\W(R)|]ZYUSTW^V[Q,R Y]^(R)Z 4.5 Solder the capacitor to the testing jig (glass epoxy board) shown in Fig. 2. Then apply a force in the direction shown in Fig. 3. The soldering should be done using the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock. d 12 Deflection 20 50 Pressurizing speed: 1.0mm/s Pressurize 40 c a 100 LZW (mm) 4.5Z2.0 4.5Z3.2 5.7Z5.0 Dimension (mm) b c 2.4 7.0 3.7 7.0 5.6 8.0 a 3.5 3.5 4.5 R230 t : 1.6 Flexure=1 d Capacitance meter 45 45 (in mm) 1.0 Fig. 3 Fig. 2 13 14 Solderability of Termination Humidity Insulation Resistance 15 to Soldering Heat 16 75% of the terminations are to be soldered evenly and continuously. Appearance No marking defects Capacitance Change Within T15% D.F. 0.05 max. I.R. More than 1,000M Dielectric Strength In accordance with item No.4 Appearance No marking defects Capacitance Change Within T10% D.F. 0.025 max. I.R. More than 2,000M Dielectric Strength In accordance with item No.4 Appearance No marking defects Capacitance Change Within T15% D.F. 0.05 max. I.R. More than 2,000M Temperature Cycle Dielectric Strength Immerse the capacitor in a solution of ethanol (JIS-K-8101) and rosin (JIS-K-5902) (25% rosin in weight proportion). Immerse in solder solution for 2T0.5 sec. Immersing speed: 25T2.5mm/s Temp. of solder: 245T5C Lead Free Solder (Sn-3.0Ag-0.5Cu) 235T5C H60A or H63A Eutectic Solder The capacitor should be subjected to 40T2D, relative humidity of 90 to 98% for 8 hrs., and then removed in room condition* for 16 hrs. until 5 cycles. Preheat the capacitor as table. Immerse the capacitor in solder solution at 260T5D for 10T1 sec. Let sit at room condition* for 24T2 hrs., then measure. #Immersing speed: 25T2.5mm/s #Pretreatment Perform a heat treatment at 150 W00 Y10 D for 60T5 min. and then let sit for 24T2 hrs. at room condition*. *Preheating Step 1 2 Temperature 100 to 120D 170 to 200D Time 1 min. 1 min. Fix the capacitor to the supporting jig (glass epoxy board) shown in Fig. 4. Perform the 5 cycles according to the 4 heat treatments listed in the following table. Let sit for 24T2 hrs. at room condition*, then measure. Time (min.) Temperature (D) Step 1 Min. Operating Temp.T3 30T3 2 Room Temp. 2 to 3 3 Max. Operating Temp.T2 30T3 4 Room Temp. 2 to 3 #Pretreatment Perform a heat treatment at 150 W00 Y10 D for 60T5 min. and then let sit for 24T2 hrs. at room condition*. In accordance with item No.4 Solder resist Cu Glass Epoxy Board Fig. 4 * "Room condition" Temperature: 15 to 35D, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa Continued on the following page. 189 14 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Specifications and Test Methods Continued from the preceding page. No. 17 18 19 Specifications Item Humidity (Steady State) Life Humidity Loading Appearance No marking defects Capacitance Change Within T15% D.F. 0.05 max. I.R. More than 1,000M Dielectric Strength In accordance with item No.4 Appearance No marking defects Capacitance Change Within T20% D.F. 0.05 max. I.R. More than 1,000M Test Method Let the capacitor sit at 40T2D and relative humidity of 90 to 95% for 500 W24 Y00 hrs. Remove and let sit for 24T2 hrs. at room condition*, then measure. #Pretreatment Perform a heat treatment at 150 W00 Y10 D for 60T5 min. and then let sit for 24T2 hrs. at room condition*. Apply voltage and time as Table at maximum operating temperature T3D. Remove and let sit for 24T2 hrs. at room condition*, then measure. The charge / discharge current is less than 50mA. Nominal Capacitance Test Voltage Test Time CU10,000pF 1,000W48 Y10 hrs. AC300V (r.m.s.) W48 CF10,000pF 1,500 Y10 hrs. AC500V (r.m.s.) * * Except that once each hour the voltage is increased to AC1,000V (r.m.s.) for 0.1 sec. Dielectric Strength In accordance with item No.4 Appearance No marking defects Capacitance Change Within T15% D.F. 0.05 max. I.R. More than 1,000M Dielectric Strength In accordance with item No.4 #Pretreatment Apply test voltage for 60T5 min. at test temperature. Remove and let sit for 24T2 hrs. at room condition*. Apply the rated voltage at 40T2D and relative humidity of 90 to 95% for 500 W24 Y00 hrs. Remove and let sit for 24T2 hrs. at room condition*, then measure. #Pretreatment Apply test voltage for 60T5 min. at test temperature. Remove and let sit for 24T2 hrs. at room condition*. * "Room condition" Temperature: 15 to 35D, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa 14 190 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Chip Monolithic Ceramic Capacitors Safety Standard Certified Type GC (UL, IEC60384-14 Class X1/Y2) e Features e T 1. Chip monolithic ceramic capacitor (certified as conforming to safety standards) for AC lines. 2. A new monolithic structure for small, high capacitance capable of operating at high voltage levels. 3. Compared to lead type capacitors, this new capacitor is greatly downsized and low-profiled to 1/10 or less in volume, and 1/4 or less in height. 4. The type GC can be used as an X1-class and Y2-class capacitor, line-by-pass capacitor of UL1414. 5. +125 degree C guaranteed 6. Only for reflow soldering g L Part Number GA355D L 5.7 0.4 W Dimensions (mm) W T e min. 5.0 0.4 2.0 0.3 0.3 g min. 4.0 Standard Certification Applications 1. Ideal for use as Y capacitor or X capacitor for various switching power supplies 2. Ideal for modem applications UL Do not use these products in any Automotive Power train or Safety equipment including Battery charger for Electric Vehicles and Plug-in Hybrid. Only Murata products clearly stipulated as "for Automotive use" on its catalog can be used for automobile applications such as Power train and Safety equipment. Standard No. Class UL1414 Line By-pass VDE IEC 60384-14 EN 60384-14 BSI EN 60065 (14.2) IEC 60384-14 EN 60384-14 SEMKO IEC 60384-14 EN 60384-14 ESTI EN 60065 IEC 60384-14 Rated Voltage AC250V (r.m.s.) X1, Y2 Electrode g min. (mm) Electrode e (mm) 2.0 4.0 0.3 min. 2.0 4.0 0.3 min. 5.0 2.0 4.0 0.3 min. 5.0 2.0 4.0 0.3 min. Part Number Rated Voltage (V) TC Code (Standard) Capacitance (pF) Length L Width W Thickness T (mm) (mm) (mm) GA355DR7GC101KY02L AC250 (r.m.s.) X7R (EIA) 100 10% 5.7 5.0 GA355DR7GC151KY02L AC250 (r.m.s.) X7R (EIA) 150 10% 5.7 5.0 GA355DR7GC221KY02L AC250 (r.m.s.) X7R (EIA) 220 10% 5.7 GA355DR7GC331KY02L AC250 (r.m.s.) X7R (EIA) 330 10% 5.7 15 191 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Chip Monolithic Ceramic Capacitors Safety Standard Certified Type GD (IEC60384-14 Class Y3) e g e Features T 1. Available for equipment based on IEC/EN60950 and UL1950 2. The type GD can be used as a Y3-class capacitor. 3. A new monolithic structure for small, high capacitance capable of operating at high voltage levels 4. +125 degree C guaranteed 5. Only for reflow soldering 6. The low-profile type (thickness: 1.5mm max.) is available. Fit for use on thinner type equipment. L Part Number GA342A GA342D GA342Q GA343D GA343Q Dimensions (mm) T 1.0 +0, -0.3 2.0 0.2 2.0 0.3 1.5 +0, -0.3 2.0 +0, -0.3 3.2 0.3 1.5 +0, -0.3 L W 4.5 0.3 4.5 0.4 e min. g min. 0.3 2.5 Standard Certification Applications 1. Ideal for use on line filters and couplings for DAA modems without transformers 2. Ideal for use on line filters for information equipment Standard No. Do not use these products in any Automotive Power train or Safety equipment including Battery charger for Electric Vehicles and Plug-in Hybrid. Only Murata products clearly stipulated as "for Automotive use" on its catalog can be used for automobile applications such as Power train and Safety equipment. Class Rated Voltage Y3 AC250V(r.m.s.) UL 60950-1 UL IEC 60384-14 EN 60384-14 SEMKO 16 W Applications Size Switching power supplies 4.5x3.2mm and under Y Communication network devices such as a modem Electrode g min. (mm) Electrode e (mm) 2.0 2.5 0.3 min. 2.0 2.5 0.3 min. 2.0 2.0 2.5 0.3 min. 2.0 2.0 2.5 0.3 min. 4.5 2.0 2.0 2.5 0.3 min. 27 5% 4.5 2.0 1.0 2.5 0.3 min. SL (JIS) 33 5% 4.5 2.0 1.0 2.5 0.3 min. AC250 (r.m.s.) SL (JIS) 39 5% 4.5 2.0 1.0 2.5 0.3 min. AC250 (r.m.s.) SL (JIS) 47 5% 4.5 2.0 1.0 2.5 0.3 min. GA342A1XGD560JW31L AC250 (r.m.s.) SL (JIS) 56 5% 4.5 2.0 1.0 2.5 0.3 min. GA342A1XGD680JW31L AC250 (r.m.s.) SL (JIS) 68 5% 4.5 2.0 1.0 2.5 0.3 min. GA342A1XGD820JW31L AC250 (r.m.s.) SL (JIS) 82 5% 4.5 2.0 1.0 2.5 0.3 min. GA342QR7GD101KW01L AC250 (r.m.s.) X7R (EIA) 100 10% 4.5 2.0 1.5 2.5 0.3 min. GA342QR7GD151KW01L AC250 (r.m.s.) X7R (EIA) 150 10% 4.5 2.0 1.5 2.5 0.3 min. GA342QR7GD221KW01L AC250 (r.m.s.) X7R (EIA) 220 10% 4.5 2.0 1.5 2.5 0.3 min. GA342QR7GD331KW01L AC250 (r.m.s.) X7R (EIA) 330 10% 4.5 2.0 1.5 2.5 0.3 min. GA342QR7GD471KW01L AC250 (r.m.s.) X7R (EIA) 470 10% 4.5 2.0 1.5 2.5 0.3 min. GA342QR7GD681KW01L AC250 (r.m.s.) X7R (EIA) 680 10% 4.5 2.0 1.5 2.5 0.3 min. GA342QR7GD102KW01L AC250 (r.m.s.) X7R (EIA) 1000 10% 4.5 2.0 1.5 2.5 0.3 min. GA342QR7GD152KW01L AC250 (r.m.s.) X7R (EIA) 1500 10% 4.5 2.0 1.5 2.5 0.3 min. GA343QR7GD182KW01L AC250 (r.m.s.) X7R (EIA) 1800 10% 4.5 3.2 1.5 2.5 0.3 min. GA343QR7GD222KW01L AC250 (r.m.s.) X7R (EIA) 2200 10% 4.5 3.2 1.5 2.5 0.3 min. GA343DR7GD472KW01L AC250 (r.m.s.) X7R (EIA) 4700 10% 4.5 3.2 2.0 2.5 0.3 min. Part Number Rated Voltage (V) TC Code (Standard) Capacitance (pF) GA342D1XGD100JY02L AC250 (r.m.s.) SL (JIS) 10 5% 4.5 2.0 GA342D1XGD120JY02L AC250 (r.m.s.) SL (JIS) 12 5% 4.5 2.0 GA342D1XGD150JY02L AC250 (r.m.s.) SL (JIS) 15 5% 4.5 GA342D1XGD180JY02L AC250 (r.m.s.) SL (JIS) 18 5% 4.5 GA342D1XGD220JY02L AC250 (r.m.s.) SL (JIS) 22 5% GA342A1XGD270JW31L AC250 (r.m.s.) SL (JIS) GA342A1XGD330JW31L AC250 (r.m.s.) GA342A1XGD390JW31L GA342A1XGD470JW31L 192 Length L Width W Thickness T (mm) (mm) (mm) PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Chip Monolithic Ceramic Capacitors Safety Standard Certified Type GF (IEC60384-14 Class Y2, X1/Y2) e g e Features T 1. Available for equipment based on IEC/EN60950 and UL1950. Besides, the GA352/355 types are available for equipment based on IEC/EN60065, UL1492, and UL6500 2. The type GF can be used as a Y2-class capacitor. 3. A new monolithic structure for small, high capacitance capable of operating at high voltage levels 4. +125 degree C guaranteed 5. Only for reflow soldering 6. The low-profile type (thickness: 1.5mm max.) is available. Fit for use on thinner type equipment. L Part Number L W Dimensions (mm) T 1.0 +0, -0.3 2.0 0.2 2.0 0.2* 1.5 +0, -0.3 2.8 0.3 1.5 +0, -0.3 2.0 +0, -0.3 5.0 0.4 1.5 +0, -0.3 W GA342A GA342D 4.5 0.3 GA342Q GA352Q GA355D 5.7 0.4 GA355Q * GA342D1X : 2.00.3 e min. g min. 2.5 0.3 4.0 Standard Certification Applications 1. Ideal for use on line filters and couplings for DAA modems without transformers 2. Ideal for use on line filters for information equipment 3. Ideal for use as Y capacitor or X capacitor for various switching power supplies (GA352/355 types only) UL Status of Certification Standard No. Class UL1414 X1, Y2 UL 60950-1 Y Size : 4.5x2.0mm Rated Size : 5.7x2.8mm Voltage and over Y Y Y VDE IEC 60384-14 X1, Y2 SEMKO EN 60384-14 Y2 AC250V (r.m.s.) Applications Do not use these products in any Automotive Power train or Safety equipment including Battery charger for Electric Vehicles and Plug-in Hybrid. Only Murata products clearly stipulated as "for Automotive use" on its catalog can be used for automobile applications such as Power train and Safety equipment. Size Switching power supplies 4.5x2.0mm Y Communication network devices such as a modem 5.7x2.8mm and over Electrode g min. (mm) Electrode e (mm) 2.0 2.5 0.3 min. 2.0 2.5 0.3 min. 2.0 2.0 2.5 0.3 min. 4.5 2.0 2.0 2.5 0.3 min. 4.5 2.0 2.0 2.5 0.3 min. 27 5% 4.5 2.0 1.0 2.5 0.3 min. SL (JIS) 33 5% 4.5 2.0 1.0 2.5 0.3 min. AC250 (r.m.s.) SL (JIS) 39 5% 4.5 2.0 1.0 2.5 0.3 min. GA342A1XGF470JW31L AC250 (r.m.s.) SL (JIS) 47 5% 4.5 2.0 1.0 2.5 0.3 min. GA342A1XGF560JW31L AC250 (r.m.s.) SL (JIS) 56 5% 4.5 2.0 1.0 2.5 0.3 min. GA342A1XGF680JW31L AC250 (r.m.s.) SL (JIS) 68 5% 4.5 2.0 1.0 2.5 0.3 min. GA342A1XGF820JW31L AC250 (r.m.s.) SL (JIS) 82 5% 4.5 2.0 1.0 2.5 0.3 min. GA342QR7GF101KW01L AC250 (r.m.s.) X7R (EIA) 100 10% 4.5 2.0 1.5 2.5 0.3 min. GA342QR7GF151KW01L AC250 (r.m.s.) X7R (EIA) 150 10% 4.5 2.0 1.5 2.5 0.3 min. GA342DR7GF221KW02L AC250 (r.m.s.) X7R (EIA) 220 10% 4.5 2.0 2.0 2.5 0.3 min. GA342DR7GF331KW02L AC250 (r.m.s.) X7R (EIA) 330 10% 4.5 2.0 2.0 2.5 0.3 min. GA342QR7GF471KW01L AC250 (r.m.s.) X7R (EIA) 470 10% 4.5 2.0 1.5 2.5 0.3 min. GA352QR7GF471KW01L AC250 (r.m.s.) X7R (EIA) 470 10% 5.7 2.8 1.5 4.0 0.3 min. GA342QR7GF681KW01L AC250 (r.m.s.) X7R (EIA) 680 10% 4.5 2.0 1.5 2.5 0.3 min. Rated Voltage (V) TC Code (Standard) Capacitance (pF) GA342D1XGF100JY02L AC250 (r.m.s.) SL (JIS) 10 5% 4.5 2.0 GA342D1XGF120JY02L AC250 (r.m.s.) SL (JIS) 12 5% 4.5 2.0 GA342D1XGF150JY02L AC250 (r.m.s.) SL (JIS) 15 5% 4.5 GA342D1XGF180JY02L AC250 (r.m.s.) SL (JIS) 18 5% GA342D1XGF220JY02L AC250 (r.m.s.) SL (JIS) 22 5% GA342A1XGF270JW31L AC250 (r.m.s.) SL (JIS) GA342A1XGF330JW31L AC250 (r.m.s.) GA342A1XGF390JW31L Part Number Length L Width W Thickness T (mm) (mm) (mm) Continued on the following page. 193 17 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Continued from the preceding page. Electrode g min. (mm) Electrode e (mm) 1.5 4.0 0.3 min. 2.0 2.5 0.3 min. 2.8 1.5 4.0 0.3 min. 5.7 2.8 1.5 4.0 0.3 min. 1800 10% 5.7 5.0 1.5 4.0 0.3 min. 2200 10% 5.7 5.0 1.5 4.0 0.3 min. X7R (EIA) 3300 10% 5.7 5.0 1.5 4.0 0.3 min. X7R (EIA) 4700 10% 5.7 5.0 2.0 4.0 0.3 min. Part Number Rated Voltage (V) TC Code (Standard) GA352QR7GF681KW01L AC250 (r.m.s.) X7R (EIA) 680 10% 5.7 2.8 GA342DR7GF102KW02L AC250 (r.m.s.) X7R (EIA) 1000 10% 4.5 2.0 GA352QR7GF102KW01L AC250 (r.m.s.) X7R (EIA) 1000 10% 5.7 GA352QR7GF152KW01L AC250 (r.m.s.) X7R (EIA) 1500 10% GA355QR7GF182KW01L AC250 (r.m.s.) X7R (EIA) GA355QR7GF222KW01L AC250 (r.m.s.) X7R (EIA) GA355QR7GF332KW01L AC250 (r.m.s.) GA355DR7GF472KW01L AC250 (r.m.s.) 17 194 Capacitance (pF) Length L Width W Thickness T (mm) (mm) (mm) PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Chip Monolithic Ceramic Capacitors Safety Standard Certified Type GB (IEC60384-14 Class X2) e g e Features T 1. The type GB can be used as an X2-class capacitor. 2. Chip monolithic ceramic capacitor (certified as conforming to safety standards) for AC lines 3. A new monolithic structure for small, high capacitance capable of operating at high voltage levels 4. Compared to lead type capacitors, this new capacitor is greatly downsized and low-profiled to 1/10 or less in volume, and 1/4 or less in height. 5. +125 degree C guaranteed 6. Only for reflow soldering L Part Number GA355Q GA355D GA355E GA355X L 5.7 0.4 W Dimensions (mm) W T e min. 1.5 +0,-0.3 2.0 +0,-0.3 5.0 0.4 0.3 2.5 +0,-0.3 2.9 +0,-0.4 g min. 3.0 Standard Certification Applications Ideal for use as X capacitor for various switching power supplies Standard No. Class Rated Voltage IEC 60384-14 EN 60384-14 X2 AC250V (r.m.s.) VDE SEMKO Do not use these products in any Automotive Power train or Safety equipment including Battery charger for Electric Vehicles and Plug-in Hybrid. Only Murata products clearly stipulated as "for Automotive use" on its catalog can be used for automobile applications such as Power train and Safety equipment. ESTI Electrode g min. (mm) Electrode e (mm) 1.5 3.0 0.3 min. 1.5 3.0 0.3 min. 5.0 2.0 3.0 0.3 min. 5.0 2.5 3.0 0.3 min. 5.7 5.0 2.5 3.0 0.3 min. 5.7 5.0 2.9 3.0 0.3 min. Part Number Rated Voltage (V) TC Code (Standard) Capacitance (pF) Length L Width W Thickness T (mm) (mm) (mm) GA355QR7GB103KW01L AC250 (r.m.s.) X7R (EIA) 10000 10% 5.7 5.0 GA355QR7GB153KW01L AC250 (r.m.s.) X7R (EIA) 15000 10% 5.7 5.0 GA355DR7GB223KW01L AC250 (r.m.s.) X7R (EIA) 22000 10% 5.7 GA355ER7GB333KW01L AC250 (r.m.s.) X7R (EIA) 33000 10% 5.7 GA355ER7GB473KW01L AC250 (r.m.s.) X7R (EIA) 47000 10% GA355XR7GB563KW06L AC250 (r.m.s.) X7R (EIA) 56000 10% 18 195 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. GA3 Series Specifications and Test Methods Specifications No. Item Test Method 1 Operating Temperature Range Y55 to W125D 2 Appearance No defects or abnormalities Visual inspection 3 Dimensions Within the specified dimensions Using calipers Y 4 Dielectric Strength No defects or abnormalities No failure should be observed when voltage in table is applied between the terminations for 60T1 sec., provided the charge/discharge current is less than 50mA. Test Voltage DC1075V Type GB AC1500V (r.m.s.) Type GC/GD/GF 5 Pulse Voltage (Application: Type GD/GF) No self healing breakdowns or flash-overs have taken place in the capacitor. 10 impulse of alternating polarity is subjected. (5 impulse for each polarity) The interval between impulse is 60 sec. Applied Voltage: 2.5kV zero to peak 6 Insulation Resistance (I.R.) More than 6,000M The insulation resistance should be measured with DC500T50V and within 60T5 sec. of charging. 7 Capacitance Within the specified tolerance 8 Dissipation Factor (D.F.) Q Char. X7R SL Specification D.F.V0.025 QU400W20C*2 (CF30pF) QU1000 (CU30pF) The capacitance/Q/D.F. should be measured at a frequency of 1T0.2kHz (SL char.: 1T0.2MHz) and a voltage of AC1T0.2V (r.m.s.) The capacitance measurement should be made at each step specified in Table. 9 Capacitance Temperature Characteristics Char. Capacitance Change Within T15% X7R Temperature characteristic guarantee is Y55 to W125D Char. Temperature Coefficient W350 to Y1000ppm/D SL Temperature characteristic guarantee is W20 to W85D Appearance No defects or abnormalities I.R. More than 1,000M Step 1 2 3 4 5 Temperature (D) 25T2 (20T2 for SL char.) Min. Operating Temp.T3 25T2 (20T2 for SL char.) Max. Operating Temp.T2 25T2 (20T2 for SL char.) SL char. : The capacitance should be measured at even 85D between step 3 and step 4. #Pretreatment for X7R char. Perform a heat treatment at 150 W00 Y10 D for 60T5 min. and then let sit for 24T2 hrs. at room condition*1. As in Fig., discharge is made 50 times at 5 sec. intervals from the capacitor (Cd) charged at DC voltage of specified. R3 10 Discharge Test (Application: Type GC) Dielectric Strength 10kV In accordance with item No.4 R1 V Ct R2 Cd Ct: Capacitor under test Cd: 0.001F R1: 1,000 R2: 100M R3: Surge resistance 11 Adhesive Strength of Termination No removal of the terminations or other defect should occur. Solder the capacitor to the testing jig (glass epoxy board) shown in Fig. 1. Then apply 10N force in the direction of the arrow. The soldering should be done using the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock. 10N, 10T1s Glass Epoxy Board 18 Fig. 1 *1 "Room condition" Temperature: 15 to 35D, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa *2 "C" expresses nominal capacitance value (pF). Continued on the following page. 196 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. GA3 Series Specifications and Test Methods Continued from the preceding page. No. 12 Specifications Item Vibration Resistance Appearance No defects or abnormalities Capacitance Within the specified tolerance D.F. Q Char. X7R SL Test Method Solder the capacitor to the test jig (glass epoxy board). The capacitor should be subjected to a simple harmonic motion having a total amplitude of 1.5mm, the frequency being varied uniformly between the approximate limits of 10 and 55Hz. The frequency range, from 10 to 55Hz and return to 10Hz, should be traversed in approximately 1 min. This motion should be applied for a period of 2 hrs. in each of 3 mutually perpendicular directions (total of 6 hrs.). Specification D.F.V0.025 QU400W20C*2 (CF30pF) QU1000 (CU30pF) Solder resist Cu Glass Epoxy Board No cracking or marking defects should occur. b VZ[TX(c)_\W(R)|]ZYUSTWQ,VR^[ Y]^(R)Z 4.5 40 d c Solder the capacitor to the testing jig (glass epoxy board) shown in Fig. 2. Then apply a force in the direction shown in Fig. 3. The soldering should be done using the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock. a 13 100 Deflection LZW (mm) 4.5Z2.0 4.5Z3.2 5.7Z2.8 5.7Z5.0 Dimension (mm) b c 7.0 2.4 7.0 3.7 8.0 3.2 8.0 5.6 a 3.5 3.5 4.5 4.5 20 50 Pressurizing speed: 1.0mm/s Pressurize t : 1.6 R230 d Flexure=1 1.0 Capacitance meter 45 Fig. 2 14 Solderability of Termination Appearance Resistance 15 to Soldering Heat Capacitance Change I.R. 75% of the terminations are to be soldered evenly and continuously. No marking defects Char. X7R SL Capacitance Change Within T10% Within T2.5% or T0.25pF (Whichever is larger) 45 (in mm) Fig. 3 Immerse the capacitor in a solution of ethanol (JIS-K-8101) and rosin (JIS-K-5902) (25% rosin in weight proportion). Immerse in solder solution for 2T0.5 sec. Immersing speed: 25T2.5mm/s Temp. of solder: 245T5C Lead Free Solder (Sn-3.0Ag-0.5Cu) 235T5C H60A or H63A Eutectic Solder Preheat the capacitor as table. Immerse the capacitor in solder solution at 260T5D for 10T1 sec. Let sit at room condition*1 for 24T2 hrs., then measure. #Immersing speed: 25T2.5mm/s #Pretreatment for X7R char. Perform a heat treatment at 150 W00 Y10 D for 60T5 min. and then let sit for 24T2 hrs. at room condition*1. More than 1,000M *Preheating Dielectric Strength In accordance with item No.4 Step 1 2 Temperature 100 to 120D 170 to 200D Time 1 min. 1 min. *1 "Room condition" Temperature: 15 to 35D, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa *2 "C" expresses nominal capacitance value (pF). Continued on the following page. 18 197 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. GA3 Series Specifications and Test Methods Continued from the preceding page. No. Appearance Capacitance Change 16 Specifications Item Temperature Cycle D.F. Q No marking defects Char. X7R SL Char. X7R SL Capacitance Change Within T15% Within T2.5% or T0.25pF (Whichever is larger) Specification D.F.V0.05 QU400W20C*2 (CF30pF) QU1000 (CU30pF) I.R. More than 3,000M Dielectric Strength In accordance with item No.4 Test Method Fix the capacitor to the supporting jig (glass epoxy board) shown in Fig. 4. Perform the 5 cycles according to the 4 heat treatments listed in the following table. Let sit for 24T2 hrs. at room condition*1, then measure. Time (min.) Temperature (D) Step 30T3 Min. Operating Temp.T3 1 2 to 3 Room Temp. 2 30T3 Max. Operating Temp.T2 3 2 to 3 Room Temp. 4 #Pretreatment for X7R char. Perform a heat treatment at 150 W00 Y10 D for 60T5 min. and then let sit for 24T2 hrs. at room condition*1. Solder resist Cu Glass Epoxy Board Fig. 4 Appearance Capacitance Change 17 Humidity (Steady State) D.F. Q Char. X7R SL Char. X7R SL Capacitance Change Within T15% Within T5.0% or T0.5pF (Whichever is larger) Specification D.F.V0.05 QU275W5/2C*2 (CF30pF) QU350 (CU30pF) I.R. More than 3,000M Dielectric Strength In accordance with item No.4 Appearance No marking defects Capacitance Change D.F. Q 18 No marking defects Char. X7R SL Char. X7R SL Capacitance Change Within T20% Within T3.0% or T0.3pF (Whichever is larger) Specification D.F.V0.05 QU275W5/2C*2 (CF30pF) QU350 (CU30pF) Life I.R. More than 3,000M Before this test, the test shown in the following is performed. *Item 11 Adhesive Strength of Termination (applied force is 5N) *Item 13 Deflection Let the capacitor sit at 40T2D and relative humidity of 90 to 95% for 500 W24 Y00 hrs. Remove and let sit for 24T2 hrs. at room condition*1, then measure. #Pretreatment for X7R char. Perform a heat treatment at 150 W00 Y10 D for 60T5 min. and then let sit for 24T2 hrs. at room condition*1. Before this test, the test shown in the following is performed. *Item 11 Adhesive Strength of Termination (apply force is 5N) *Item 13 Deflection Impulse Voltage Each individual capacitor should be subjected to a 2.5kV (Type GC/GF: 5kV) Impulse (the voltage value means zero to peak) for three times. Then the capacitors are applied to life test. GB In accordance with item No.4 100 90 50 (%) 30 0 t T T1 T2 Apply voltage as Table for 1,000 hrs. at 125 W2 Y0 D, relative humidity 50% max. Type Dielectric Strength Front time (T1)=1.2s=1.67T Time to half-value (T2)=50s GC GD GF Applied Voltage AC312.5V (r.m.s.), except that once each hour the voltage is increased to AC1,000V (r.m.s.) for 0.1 sec. AC425V (r.m.s.), except that once each hour the voltage is increased to AC1,000V (r.m.s.) for 0.1 sec. Let sit for 24T2 hrs. at room condition*1, then measure. #Pretreatment for X7R char. Perform a heat treatment at 150 W00 Y10 D for 60T5 min. and then let sit for 24T2 hrs. at room condition*1. *1 "Room condition" Temperature: 15 to 35D, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa *2 "C" expresses nominal capacitance value (pF). 18 Continued on the following page. 198 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. GA3 Series Specifications and Test Methods Continued from the preceding page. No. Appearance Capacitance Change 19 Specifications Item Humidity Loading D.F. Q Test Method No marking defects Char. X7R SL Char. X7R SL Capacitance Change Within T15% Within T5.0% or T0.5pF (Whichever is larger) Specification D.F.V0.05 QU275W5/2C*2 (CF30pF) QU350 (CU30pF) I.R. More than 3,000M Dielectric Strength In accordance with item No.4 Before this test, the test shown in the following is performed. *Item 11 Adhesive Strength of Termination (apply force is 5N) *Item 13 Deflection Apply the rated voltage at 40T2D and relative humidity of 90 to 95% for 500 W24 Y00 hrs. Remove and let sit for 24T2 hrs. at room condition*1, then measure. #Pretreatment for X7R char. Perform a heat treatment at 150 W00 Y10 D for 60T5 min. and then let sit for 24T2 hrs. at room condition*1. The capacitor should be individually wrapped in at least one but not more than two complete layers of cheesecloth. The capacitor should be subjected to 20 discharges. The interval between successive discharges should be 5 sec. The UAC should be maintained for 2 min. after the last discharge. F S1 Tr S2 C1 UAC L1 R L2 C2 C3 L3 Cx Ct Ut L4 Oscilloscope 20 Active Flammability The cheesecloth should not be on fire. C1,2 L1 to 4 Ct Cx F : 1FT10% C3 : 0.033FT5% 10kV : 1.5mHT20% 16A Rod core choke : 3FT5% 10kV R : 100T2% : Capacitor under test UAC : URT5% : Fuse, Rated 16A UR : Rated Voltage Ut : Voltage applied to Ct Ux Type GB, GD GC, GF Ui Ui 2.5kV 5kV time The burning time should not exceed 30 sec. The tissue paper should not ignite. Test Specimen 45 200T5mm Passive Flammability About 8mm 21 The capacitor under test should be held in the flame in the position which best promotes burning. Each specimen should only be exposed once to the flame. Time of exposure to flame: 30 sec. Length of flame : 12T1mm Gas burner : Length 35mm min. Inside Dia. 0.5T0.1mm Outside Dia. 0.9mm max. Gas : Butane gas Purity 95% min. Tissue About 10mm Thick Board *1 "Room condition" Temperature: 15 to 35D, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa *2 "C" expresses nominal capacitance value (pF). 18 199 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. GRM/GR4/GR7/GA2/GA3 Series Data (Typical Example) Capacitance - Temperature Characteristics C0G/U2J/SL Characteristics X7R Characteristics 20 30 15 20 U2J X7R Char. Spec.(upper) 5 C0G SL 0 U2J C0G -5 Cap. Change (%) Cap. Change (%) 10 10 0 -10 -10 SL -20 -60 X7R Char. Spec.(lower) -20 -15 -40 -20 0 20 40 60 80 -30 -60 100 120 140 -40 -20 0 20 40 60 80 100 120 140 Temperature (C) Temperature (C) GR4 Series 20 15 Cap. Change (%) 10 5 0 -5 -10 -15 -20 -60 -40 -20 0 20 40 60 80 100 120 140 Temperature (C) Impedance - Frequency Characteristics GRM Series (C0G Char. 630V) GRM Series (X7R Char. 250V) 10k 1k 1k 100 1000pF 470pF 100 10 Z () Z () 100pF 10 1000pF 100000pF 10000pF 1 1 100m 100m 10m 1M 10M 100M Frequency (Hz) 1G 10G 10m 1M 10M 100M 1G Frequency (Hz) Continued on the following page. 18 200 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. GRM/GR4/GR7/GA2/GA3 Series Data (Typical Example) Continued from the preceding page. Impedance - Frequency Characteristics GRM Series (X7R Char. 630V) GR4 Series 1k 1k 100 100 1000pF 100pF 1000pF 10 Z () Z () 10 10000pF 100000pF 4700pF 1 1 100m 100m 10m 1M 10M 100M Frequency (Hz) 10m 1M 1G 10M 100M 1G Frequency (Hz) GR7 Series GA2 Series 1k 1k 100 100 1000pF 10 Z () Z () 10 10000pF 1 10000pF 100000pF 1 22000pF 100m 10m 1M 100m 10M 100M 1G Frequency (Hz) 10m 1M GA3 Series (Type GD) 10M 100M Frequency (Hz) 1G GA3 Series (Type GF) 1K 1K 150pF 100 100 1000pF 1000pF 10 Z () Z () 10 2200pF 2200pF 1 1 100m 100m 10m 1M 10M 100M Frequency (Hz) 1G 10m 1M 10M 100M 1G Frequency (Hz) Continued on the following page. 18 201 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. GRM/GR4/GR7/GA2/GA3 Series Data (Typical Example) Continued from the preceding page. Impedance - Frequency Characteristics GA3 Series (Type GB) 100 10 Z () 10000pF 1 56000pF 0.1 33000pF 0.01 1M 10M 100M 1G Frequency (Hz) Capacitance - AC Voltage Characteristics GA3 Series (Type GD/GF, X7R char.) GA3 Series (Type GB) at Room Condition (25C) 60 60 40 40 20 20 Cap. Change (%) Cap. Change (%) at Room Condition (25C) 0 -20 10000pF 0 33000pF -20 56000pF -40 -40 -60 0 100 200 300 AC Voltage [V(r.m.s.)] 18 202 400 500 -60 0 200 400 600 AC Voltage [V(r.m.s.)] 800 1000 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Package Taping is standard packaging method. c Minimum Quantity Guide GRM18 GRM21 GRM31/GR731 Medium Voltage GRM32 GRM42/GR442 GRM43/GR443 AC250V o180mm Reel L W T Paper Tape Embossed Tape 1.6 0.8 0.8 4,000 - 1.0 4,000 - 1.25 - 3,000 1.0 4,000 - 1.25 - 3,000 1.6 - 2,000 1.0 4,000 - 1.25 - 3,000 1.5 - 2,000 2.0 - 1,000 1.0 - 3,000 1.5 - 2,000 2.0 - 2,000 1.5 - 1,000 2.0 - 1,000 2.5 - 500 2.0 3.2 3.2 4.5 4.5 1.25 1.6 2.5 2.0 3.2 GRM55/GR455 5.7 5.0 2.0 - 1,000 GA242 4.5 2.0 1.5 - 2,000 GA243 4.5 3.2 1.5 - 1,000 2.0 - 1,000 GA255 5.7 5.0 2.0 - 1,000 1.0 - 3,000 1.5 - 2,000 2.0 - 2,000 1.5 - 1,000 2.0 - 1,000 1.5 - 1,000 1.5 - 1,000 2.0 - 1,000 2.5 - 500 2.7 - 500 2.9 - 500 GA342 Safety Std. Certification Quantity (pcs.) Dimensions (mm) Part Number 4.5 2.0 GA343 4.5 3.2 GA352 5.7 2.8 GA355 5.7 5.0 c Tape Carrier Packaging (1) Appearance of Taping q Embossed Tape w Paper Tape Cover Tape: 0.06mm in thickness Top Tape: 0.05mm in thickness Sprocket Hole: As specified in (2) Sprocket Hole: As specified in (2) Cavity for Chip: As specified in (2) Cavity for Chip: As specified in (2) 18 Bottom Tape: 0.05mm in thickness Base Tape: As specified in (2) Packed Chips Chip Base Tape: As specified in (2) Packed Chips Chip Continued on the following page. 203 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Package Continued from the preceding page. (2) Dimensions of Tape q Embossed Tape 8mm width 4mm pitch Tape 12mm width 8mm/4mm pitch Tape W0.1 4.0T0.05 0.25T0.1 Direction of Feed 0.3T0.1 1.75T0.1 1.45 2.25 GRM31/GR731 (TU1.25mm) 2.0 3.6 2.9 3.6 12.0T0.3 5.5T0.05 Direction of Feed B* GRM21 (TU1.25mm) (TU1.25mm) 1.5 Y0 A 2.5 max. A* GRM32 2.0T0.05 4.0T0.1 8.0T0.3 B A Part Number 8.0T0.1*1 1.75T0.1 3.5T0.05 4.0T0.1 2.0T0.05 B W0.1 1.5 Y0 3.7 max. Part Number A* B* GRM42/GR442/GA242/GA342 2.5 5.1 GRM43/GR443/GA243/GA343 3.6 4.9 GA352 3.2 6.1 GRM55/GR455/GA255/GA355 5.4 6.1 *1 4.00.1mm in case of GRM42/GR442/GA242/GA342 *Nominal Value *Nominal Value (in mm) w Paper Tape (3) Dimensions of Reel 8mm width 4mm pitch Tape 4.0T0.1 2.0T0.05 1.1 max. 1.75T0.1 B A 13.0T1.0 (Tape width 8mm) 17.0T1.0 (Tape width 12mm) 8.0T0.3 W0.1 1.5 Y0 3.5T0.05 4.0T0.1 2.0T0.5 Direction of Feed 180 +0 -1.5 +1 60 -0 13T0.2 21T0.8 Part Number 18 A* B* GRM18 1.05 1.85 GRM21 (T=1.0mm) 1.45 2.25 GRM31/GR731 (T=1.0mm) 2.0 3.6 GRM32 (T=1.0mm) 2.9 3.6 +1.0 9.0 -0 (Tape width 8mm) *Nominal Value (in mm) +1.0 13.0 -0 (Tape width 12mm) (in mm) Continued on the following page. 204 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Package Continued from the preceding page. (4) Taping Method q Tapes for capacitors are wound clockwise. The sprocket holes are to the right as the tape is pulled toward the user. w Part of the leader and part of the empty tape should be attached to the end of the tape as shown at right. e The top tape or cover tape and base tape are not attached at the end of the tape for a minimum of 5 pitches. r Missing capacitors number within 0.1% of the number per reel or 1 pc, whichever is greater, and are not continuous. t The top tape or cover tape and bottom tape should not protrude beyond the edges of the tape and should not cover sprocket holes. y Cumulative tolerance of sprocket holes, 10 pitches: T0.3mm. u Peeling off force: 0.1 to 0.6N in the direction shown at right. Vacant section Chip mounting unit Vacant section 160 min. 160 min. 400 to 560 Direction of feed (Top Tape or Cover Tape alone) (in mm) 165 to 180 Top Tape or Cover Tape Base Tape 18 205 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. !Caution Storage and Operating Conditions Operating and storage environment Do not use or store capacitors in a corrosive atmosphere, especially where chloride gas, sulfide gas, acid, alkali, salt or the like are present. And avoid exposure to moisture. Before cleaning, bonding or molding this product, verify that these processes do not affect product quality by testing the performance of a cleaned, bonded or molded product in the intended equipment. Store the capacitors where the temperature and relative humidity do not exceed 5 to 40 degrees centigrade and 20 to 70%. Handling 1. Vibration and impact Do not expose a capacitor to excessive shock or vibration during use. 2. Do not directly touch the chip capacitor, especially the ceramic body. Residue from hands/fingers may create a short circuit environment. FAILURE TO FOLLOW THE ABOVE CAUTIONS MAY RESULT, WORST CASE, IN A SHORT CIRCUIT AND CAUSE FUMING OR PARTIAL DISPERSION WHEN THE PRODUCT IS USED. 18 206 Use capacitors within 6 months after delivered. Check the solderability after 6 months or more. FAILURE TO FOLLOW THE ABOVE CAUTIONS MAY RESULT, WORST CASE, IN A SHORT CIRCUIT AND CAUSE FUMING OR PARTIAL DISPERSION WHEN THE PRODUCT IS USED. PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. !Caution Caution (Rating) 1. Operating Voltage When DC-rated capacitors are to be used in AC or ripple current circuits, be sure to maintain the Vp-p value of the applied voltage or the Vo-p which contains DC bias within the rated voltage range. When the voltage is applied to the circuit, starting or stopping may generate irregular voltage for a transit period because of resonance or switching. Be sure to use a capacitor with a rated voltage range that includes these irregular voltages. When DC-rated capacitors are to be used in input circuits from commercial power source (AC filter), be sure to use Safety Certified Capacitors because various regulations on withstand voltage or impulse withstand established for each equipment should be taken into considerations. Voltage Positional Measurement DC Voltage V0-p DC+AC Voltage V0-p AC Voltage Vp-p Pulse Voltage (1) Vp-p Pulse Voltage (2) Vp-p 2. Operating Temperature, Self-generated Heat, and Load Reduction at High-frequency Voltage Condition Keep the surface temperature of a capacitor below the upper limit of its rated operating temperature range. Be sure to take into account the heat generated by the capacitor itself. When the capacitor is used in a highfrequency voltage, pulse voltage, it may self-generate heat due to dielectric loss. (1) In case of X7R char. Applied voltage should be the load such as selfgenerated heat is within 20C on the condition of atmosphere temperature 25C. When measuring, use a thermocouple of small thermal capacity -K of o0.1mm in conditions where the capacitor is not affected by radiant heat from other components or surrounding ambient fluctuations. Excessive heat may lead to deterioration of the capacitor's characteristics and reliability. (Never attempt to perform measurement with the cooling fan running. Otherwise, accurate measurement cannot be ensured.) Continued on the following page. 18 207 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. !Caution Continued from the preceding page. (2) In case of C0G, U2J char. Due to the low self-heating characteristics of lowdissipation capacitors, the allowable electric power of these capacitors is generally much higher than that of X7R characteristic capacitors. When a high frequency voltage which cause 20C self heating to the capacitor is applied, it will exceed capacitor's allowable electric power. The frequency of the applied sine wave voltage should be less than 500kHz (less than 100kHz in case of rated voltage: DC3.15kV). The applied voltage should be less than the value shown in figure below. While, in case of non-sine wave which include a harmonic frequency, please contact our sales representatives or product engineers. Excessive heat may lead to deterioration of the capacitor's characteristics and reliability. (Never attempt to perform measurement with the cooling fan running. Otherwise, accurate measurement cannot be ensured.) <C0G char., Rated Voltage: DC3.15kV> The capacitors less than 22pF can be applied maximum 4.0kV peak to peak at 100kHz or less only for the ballast or the resonance usage in the LCD backlight inverter circuit. <Capacitor Selection Tool> We are also offering free software the "capacitor selection tool: Murata Medium Voltage Capacitors Selection Tool by Voltage Form (*)" which will assist you in selecting a suitable capacitor. The software can be downloaded from Murata's Internet Website. (http://www.murata.com/designlib/mmcsv_e.html). By inputting capacitance values and applied voltage waveform of the specific capacitor series, this software will calculate the capacitor's power consumption and list suitable capacitors (non-sine wave is also available). * Subject series are below. * Temperature Characteristics C0G, U2J The temperature of the surface of capacitor: 125C or less (including self-heating) C0G char., Rated Voltage: DC630V 680pF 820pF 1000pF 1 10 100 Frequency [kHz] to 22pF 27 to 47pF (3150) 1000 1 1000 U2J char., Rated Voltage: DC250V to 4,700pF (250) 10,000pF 1 10 100 Frequency [kHz] Allowable voltage [Vp-p] Allowable voltage [Vp-p] 1000 100 U2J char., Rated Voltage: DC2kV 10 100 Frequency [kHz] (500)1000 1000 100 1 10 100 Frequency [kHz] (500)1000 U2J char., Rated Voltage: DC3.15kV to 100pF 150pF 220pF 1 10 100 Frequency [kHz] (500)1000 Allowable voltage [Vp-p] Allowable voltage [Vp-p] 1 to 470pF 10000 1000 100 1,000pF 2,200pF (500)1000 U2J char., Rated Voltage: DC1kV 10000 to 680pF (630) 10000 18 1000 U2J char., Rated Voltage: DC630V 1000 100 10 100 Frequency [kHz] Allowable voltage [Vp-p] 560pF (630) 100 C0G char., Rated Voltage: DC3.15kV 10000 100 to 470pF Allowable voltage [Vp-p] Allowable voltage [Vp-p] 1000 to 33pF 47pF 100pF (3150) 1000 1 10 100 Frequency [kHz] 1000 The sine-wave frequency VS allowable voltage Continued on the following page. 208 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. !Caution Continued from the preceding page. 3. Fail-safe Failure of a capacitor may result in a short circuit. Be sure to provide an appropriate fail-safe function such as a fuse on your product to help eliminate possible electric shock, fire, or fumes. Please consider using fuses on each AC line if the capacitors are used between the AC input lines and earth (line bypass capacitors), to prepare for the worst case, such as a short circuit. FUSE AC IN 4. Test Condition for AC Withstanding Voltage (1) Test Equipment Tests for AC withstanding voltage should be made with equipment capable of creating a wave similar to a 50/60 Hz sine wave. If the distorted sine wave or overload exceeding the specified voltage value is applied, a defect may be caused. (2) Voltage Applied Method The capacitor's leads or terminals should be firmly connected to the output of the withstanding voltage test equipment, and then the voltage should be raised from near zero to the test voltage. If the test voltage is applied directly to the capacitor without raising it from near zero, it should be applied with the zero cross*. At the end of the test time, the test voltage should be reduced to near zero, and then the capacitor's leads or terminals should be taken off the output of the withstanding voltage test equipment. If the test voltage is applied directly to the capacitor without raising it from near zero, surge voltage may occur and cause a defect. Voltage sine wave *ZERO CROSS is the point where voltage sine wave pass 0V. - See the figure at right - 0V zero cross FAILURE TO FOLLOW THE ABOVE CAUTIONS MAY RESULT, WORST CASE, IN A SHORT CIRCUIT AND CAUSE FUMING OR PARTIAL DISPERSION WHEN THE PRODUCT IS USED. 18 209 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. !Caution Caution (Soldering and Mounting) 1. Vibration and Impact Do not expose a capacitor to excessive shock or vibration during use. 2. Circuit Board Material It is possible for the chip to crack by the expansion and shrinkage of a metal board. Please contact us if you want to use our ceramic capacitors on a metal board such as Aluminum. 3. Land Layout for Cropping PC Board Choose a mounting position that minimizes the stress imposed on the chip during flexing or bending of the board. [Component Direction] [Chip Mounting Close to Board Separation Point] Locate chip horizontal to the direction in which stress acts. <Example to be avoided> <Examples of improvements> C Perforation B D A Chip arrangement Worst AGCGB~D Best Slit Continued on the following page. 18 210 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. !Caution Continued from the preceding page. 4. Reflow Soldering When sudden heat is given to the components, the mechanical strength of the components should go down because remarkable temperature change causes deformity of components inside. In order to prevent mechanical damage in the components, preheating should be required for both of the components and the PCB board. Preheating conditions are shown in Table 1. It is required to keep temperature differential between the soldering and the components surface (T) as small as possible. Solderability of Tin plating termination chip might be deteriorated when low temperature soldering profile where peak solder temperature is below the Tin melting point is used. Please confirm the solderability of Tin plating termination chip before use. When components are immersed in solvent after mounting, be sure to maintain the temperature difference (T) between the component and solvent within the range shown in the Table 1. [Standard Conditions for Reflow Soldering] ,,, ,,, ,,, ,,, ,,, ,,, ,,, ,,, ,,, Infrared Reflow Temperature (D) Soldering Peak Temperature Gradual Cooling 200C T 170C 150C 130C Preheating Time 60-120 seconds 30-60 seconds Vapor Reflow Temperature (D) Soldering Peak Temperature Gradual Cooling T 170C 150C 130C Table 1 Part Number Preheating Temperature Differential G--18/21/31 TV190D G--32/42/43/52/55 TV130D 60-120 seconds Recommended Conditions Lead Free Solder Peak Temperature 230-250C 230-240C 240-260C Atmosphere Air Air Air or N2 Pb-Sn Solder: Sn-37Pb Lead Free Solder: Sn-3.0Ag-0.5Cu [Allowable Soldering Temperature and Time] Soldering Temperature (D) Pb-Sn Solder Infrared Reflow Vapor Reflow Time 20 seconds max. 270 260 250 240 230 0 30 60 90 Soldering Time (sec.) In case of repeated soldering, the accumulated soldering time must be within the range shown above. Optimum Solder Amount for Reflow Soldering Overly thick application of solder paste results in excessive fillet height solder. This makes the chip more susceptible to mechanical and thermal stress on the board and may cause cracked chips. Too little solder paste results in a lack of adhesive strength on the outer electrode, which may result in chips breaking loose from the PCB. Make sure the solder has been applied smoothly to the end surface to a height of 0.2mm min. [Optimum Solder Amount for Reflow Soldering] 0.2mm min. in section 18 Inverting the PCB Make sure not to impose an abnormal mechanical shock on the PCB. Continued on the following page. 211 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. !Caution Continued from the preceding page. 5. Flow Soldering Table 2 ,,, ,,, ,,, ,,, ,,, ,,, [Standard Conditions for Flow Soldering] Temperature (D) Soldering Peak Temperature T Preheating 60-120 seconds Temperature Differential Time 5 seconds max. [Allowable Soldering Temperature and Time] 270 260 250 240 230 0 Part Number Gradual Cooling 170C 150C 130C Soldering Temperature (D) When sudden heat is given to the components, the mechanical strength of the components should go down because remarkable temperature change causes deformity of components inside. And an excessively long soldering time or high soldering temperature results in leaching by the outer electrodes, causing poor adhesion or a reduction in capacitance value due to loss of contact between electrodes and end termination. In order to prevent mechanical damage in the components, preheating should be required for both of the components and the PCB board. Preheating conditions are shown in Table 2. It is required to keep temperature differential between the soldering and the components surface (T) as small as possible. When components are immersed in solvent after mounting, be sure to maintain the temperature difference between the component and solvent within the range shown in Table 2. Do not apply flow soldering to chips not listed in Table 2. 10 20 30 Soldering Time (sec.) TV150D G--18/21/31 In case of repeated soldering, the accumulated soldering time must be within the range shown above. Recommended Conditions Pb-Sn Solder Lead Free Solder Peak Temperature 240-250C 250-260C Atmosphere Air N2 Pb-Sn Solder: Sn-37Pb Lead Free Solder: Sn-3.0Ag-0.5Cu Optimum Solder Amount for Flow Soldering The top of the solder fillet should be lower than the thickness of components. If the solder amount is excessively big, the risk of cracking is higher during board bending or under any other stressful conditions. Up to Chip Thickness Adhesive in section Continued on the following page. 18 212 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. !Caution Continued from the preceding page. 6. Correction with a Soldering Iron When sudden heat is applied to the components by use of a soldering iron, the mechanical strength of the components will go down because the extreme temperature change causes deformations inside the components. In order to prevent mechanical damage to the components, preheating is required for both the components and the PCB board. Preheating conditions, (The "Temperature of the Soldering Iron Tip", "Preheating Temperature", "Temperature Differential" between iron tip and the components and the PCB), should be within the conditions of table 3. It is required to keep the temperature differential between the soldering Iron and the components surface (T) as small as possible. After soldering, do not allow the component/PCB to cool down rapidly. The operating time for the re-working should be as short as possible. When re-working time is too long, it may cause solder leaching, and that will cause a reduction of the adhesive strength of the terminations. Table 3 Part Number Temperature Preheating Temperature of Soldering Differential Atmosphere Temperature Iron tip (T) G--18/21/31 350C max. 150C min. TV190D air G--32/42/43/ 52/55 280C max. 150C min. TV130D air *Applicable for both Pb-Sn and Lead Free Solder. Pb-Sn Solder: Sn-37Pb Lead Free Solder: Sn-3.0Ag-0.5Cu Optimum Solder Amount when re-working Using a Soldering Iron In case of smaller sizes than Gpp18, the top of the solder fillet should be lower than 2/3's of the thickness of the component or 0.5mm whichever is smaller. In case of larger sizes than Gpp21, the top of the solder fillet should be lower than 2/3's of the thickness of the component. If the solder amount is excessive, the risk of cracking is higher during board bending or under any other stressful conditions. A Soldering iron o3mm or smaller should be used. It is also necessary to keep the soldering iron from touching the components during the re-work. Solder wire with o0.5mm or smaller is required for soldering. Solder Amount in section 7. Washing Excessive output of ultrasonic oscillation during cleaning causes PCBs to resonate, resulting in cracked chips or broken solder. Take note not to vibrate PCBs. FAILURE TO FOLLOW THE ABOVE CAUTIONS MAY RESULT, WORST CASE, IN A SHORT CIRCUIT AND FUMING WHEN THE PRODUCT IS USED. 18 213 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Notice Notice (Soldering and Mounting) 1. Construction of Board Pattern After installing chips, if solder is excessively applied to the circuit board, mechanical stress will cause destruction resistance characteristics to lower. To prevent this, be extremely careful in determining shape and dimension before designing the circuit board diagram. Construction and Dimensions of Pattern (Example) Flow Soldering Chip Capacitor LgW Solder Resist c L W b a b c 1.6g0.8 0.6-1.0 0.8-0.9 0.6-0.8 2.0g1.25 1.0-1.2 0.9-1.0 0.8-1.1 3.2g1.6 2.2-2.6 1.0-1.1 1.0-1.4 Flow soldering : 3.2g1.6 or less available. Land a Reflow Soldering LgW 1.6g0.8 a b c 0.6-0.8 0.6-0.7 0.6-0.8 2.0g1.25 1.0-1.2 0.6-0.7 0.8-1.1 3.2g1.6 2.2-2.4 0.8-0.9 1.0-1.4 3.2g2.5 2.0-2.4 1.0-1.2 1.8-2.3 4.5g2.0 2.8-3.4 1.2-1.4 1.4-1.8 4.5g3.2 2.8-3.4 1.2-1.4 2.3-3.0 5.7g2.8 4.0-4.6 1.4-1.6 2.1-2.6 5.7g5.0 4.0-4.6 1.4-1.6 3.5-4.8 (in mm) Dimensions of Slit (Example) Chip Capacitor Slit Solder Resist d L e W Land Preparing slit helps flux cleaning and resin coating on the back of the capacitor. But, the length of slit design should be shorter enough as much as possible to prevent the mechanical damage in the capacitor. The longer slit design might receive more severe mechanical stress from the PCB. Recommendable slit design is shown in the Table. LgW d e 1.6g0.8 - - 2.0g1.25 - - 3.2g1.6 1.0-2.0 3.2-3.7 3.2g2.5 1.0-2.0 4.1-4.6 4.5g2.0 1.0-2.8 3.6-4.1 4.5g3.2 1.0-2.8 4.8-5.3 5.7g2.8 1.0-4.0 4.4-4.9 5.7g5.0 1.0-4.0 6.6-7.1 (in mm) Continued on the following page. 18 214 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Notice Continued from the preceding page. Land Layout to Prevent Excessive Solder Mounting Close to a Chassis d1 Chassis Mounting with Leaded Components Solder (Ground solder) Mounting Leaded Components Later Soldering Iron Lead Wire of Component to be Connected Later. Lead Wire Connected to a Part Provided with Lead Wires. Examples of Prohibition Adhesive Base board in section Land Pattern d2 Examples of Improvements by the Land Division in section Solder Resist d1<d2 in section Solder Resist Solder Resist in section in section in section 2. Mounting of Chips Thickness of adhesives applied Keep thickness of adhesives applied (50-105m or more) to reinforce the adhesive contact considering the thickness of the termination or capacitor (20-70m) and the land pattern (30-35m). Mechanical shock of the chip placer When the positioning claws and pick-up nozzle are worn, the load is applied to the chip while positioning is concentrated in one position, thus causing cracks, breakage, faulty positioning accuracy, etc. Careful checking and maintenance are necessary to prevent unexpected trouble. An excessively low bottom dead point of the suction nozzle imposes great force on the chip during mounting, causing cracked chips. Please set the suction nozzle's bottom dead point on the upper surface of the board. 3. Soldering (1) Limit of losing effective area of the terminations and conditions needed for soldering. Depending on the conditions of the soldering temperature and/or immersion (melting time), effective areas may be lost in some part of the terminations. To prevent this, be careful in soldering so that any possible loss of the effective area on the terminations will securely remain at a maximum of 25% on all edge length A-B-C-D-A of part with A, B, C, D, shown in the Figure below. A (2) Flux Application An excessive amount of flux generates a large quantity of flux gas, causing deteriorated solderability. So apply flux thinly and evenly throughout. (A foaming system is generally used for flow soldering.) Flux containing too high percentage of halide may cause corrosion of the outer electrodes unless sufficient cleaning. Use flux with a halide content of 0.2% max. Do not use strong acidic flux. Do not use water-soluble flux*. (*Water-soluble flux can be defined as non rosin type flux including wash-type flux and non-wash-type flux.) B D C Termination Continued on the following page. 215 18 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Notice Continued from the preceding page. 4. Cleaning Please confirm there is no problem in the reliability of the product beforehand when cleaning it with the intended equipment. The residue after cleaning it might cause the decrease in the surface resistance of the chip and the corrosion of the electrode part, etc. As a result it might cause reliability to deteriorate. Please confirm beforehand that there is no problem with the intended equipment in ultrasonic cleansing. 5. Resin Coating Please use it after confirming there is no influence on the product with a intended equipment beforehand when the resin coating and molding. A cracked chip might be caused at the cooling/heating cycle by the amount of resin spreading and/or bias thickness. The resin for coating and molding must be selected as the stress is small when stiffening and the hygroscopic is low as possible. Rating 1. Capacitance change of capacitor (1) In case of X7R char. Capacitors have an aging characteristic, whereby the capacitor continually decreases its capacitance slightly if the capacitor is left on for a long time. Moreover, capacitance might change greatly depending on the surrounding temperature or an applied voltage. So, it is not likely to be suitable for use in a time constant circuit. Please contact us if you need detailed information. (2) In case of any char. except X7R Capacitance might change a little depending on the surrounding temperature or an applied voltage. Please contact us if you intend to use this product in a strict time constant circuit. 18 216 2. Performance check by equipment Before using a capacitor, check that there is no problem in the equipment's performance and the specifications. Generally speaking, CLASS 2 (X7R char.) ceramic capacitors have voltage dependence characteristics and temperature dependence characteristics in capacitance. So, the capacitance value may change depending on the operating condition in the equipment. Therefore, be sure to confirm the apparatus performance of receiving influence in a capacitance value change of a capacitor, such as leakage current and noise suppression characteristics. Moreover, check the surge-proof ability of a capacitor in the equipment, if needed, because the surge voltage may exceed specific value by the inductance of the circuit. PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 09.9.18 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. ISO 9001 Certifications Qualified Standards The products listed here have been produced by ISO 9001 certified factory. Plant Fukui Murata Mfg. Co., Ltd. Izumo Murata Mfg. Co., Ltd. Okayama Murata Mfg. Co., Ltd. Murata Electronics Singapore (Pte.) Ltd. Beijing Murata Electronics Co., Ltd. Wuxi Murata Electronics Co., Ltd. 217 !Note * This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. C02E.pdf 09.9.18