Data Sheet NESG2021M05 NPN SiGe RF Transistor for Low Noise, High-Gain Amplification Flat-Lead 4-Pin Thin-Type Super Minimold (M05) R09DS0034EJ0300 Rev. 3.00 Jun 20, 2012 FEATURES * This device is an ideal choice for low noise, high-gain at low current amplifications. NF = 0.9 dB TYP., Ga = 18.0 dB TYP. @ VCE = 2 V, IC = 3 mA, f = 2 GHz NF = 1.3 dB TYP., Ga = 10.0 dB TYP. @ VCE = 2 V, IC = 3 mA, f = 5.2 GHz * Maximum stable power gain: MSG = 22.5 dB TYP. @ VCE = 3 V, IC = 10 mA, f = 2 GHz * High breakdown voltage technology for SiGe Tr. adopted: VCEO (absolute maximum ratings) = 5.0 V * Flat-lead 4-pin thin-type super minimold (M05) package <R> ORDERING INFORMATION Part Number Order Number NESG2021M05 NESG2021M05-A NESG2021M05-T1 NESG2021M05-T1-A Remark Package Quantity Supplying Form Flat-lead 4-pin thintype supper minimold (M05, 2012 PKG) (Pb-Free) 50 pcs (Non reel) 3 kpcs/reel * 8 mm wide embossed taping * Pin 3 (Collector), Pin 4 (Emitter) face the perforation side of the tape To order evaluation samples, please contact your nearby sales office. Unit sample quantity is 50 pcs. ABSOLUTE MAXIMUM RATINGS (TA = +25C) Parameter Collector to Base Voltage Collector to Emitter Voltage Emitter to Base Voltage Collector Current Total Power Dissipation Junction Temperature Storage Temperature Note: Symbol VCBO VCEO VEBO IC Ptot Note Tj Tstg Ratings 13.0 5.0 1.5 35 175 150 -65 to +150 Unit V V V mA mW C C Mounted on 1.08 cm2 x 1.0 mm (t) glass epoxy PCB CAUTION Observe precautions when handling because these devices are sensitive to electrostatic discharge. The mark <R> shows major revised points. The revised points can be easily searched by copying an "<R>" in the PDF file and specifying it in the "Find what:" field. R09DS0034EJ0300 Rev. 3.00 Jun 20, 2012 Page 1 of 12 NESG2021M05 <R> ELECTRICAL CHARACTERISTICS (TA = +25C) Parameter DC Characteristics Collector Cut-off Current Emitter Cut-off Current DC Current Gain RF Characteristics Gain Bandwidth Product Insertion Power Gain Noise Figure (1) Symbol ICBO IEBO hFE Note 1 fT S21e2 NF Noise Figure (2) NF Associated Gain (1) Ga Associated Gain (2) Ga Reverse Transfer Capacitance Maximum Stable Power Gain Gain 1 dB Compression Output Power 3rd Order Intermodulation Distortion Output Intercept Point Cre Note 2 MSG Note 3 PO (1 dB) OIP3 Test Conditions MIN. TYP. MAX. Unit VCB = 5 V, IE = 0 VEB = 1 V, IC = 0 VCE = 2 V, IC = 5 mA - - 130 - - 190 100 100 260 nA nA - VCE = 3 V, IC = 10 mA, f = 2 GHz VCE = 3 V, IC = 10 mA, f = 2 GHz VCE = 2 V, IC = 3 mA, f = 2 GHz, ZS = ZSopt, ZL = ZLopt VCE = 2 V, IC = 3 mA, f = 5.2 GHz, ZS = ZSopt, ZL = ZLopt VCE = 2 V, IC = 3 mA, f = 2 GHz, ZS = ZSopt, ZL = ZLopt VCE = 2 V, IC = 3 mA, f = 5.2 GHz, ZS = ZSopt, ZL = ZLopt VCB = 2 V, IE = 0, f = 1 MHz VCE = 3 V, IC = 10 mA, f = 2 GHz VCE = 3 V, IC = 12 mA, f = 2 GHz, ZS = ZSopt, ZL = ZLopt 20 17.0 25 19.0 - - GHz dB - 0.9 1.2 dB - 1.3 - dB 15.0 18.0 - dB - 10.0 - dB - 20.0 0.1 22.5 0.2 - pF dB - 9.0 - dBm VCE = 3 V, IC = 12 mA, f = 2 GHz, ZS = ZSopt, ZL = ZLopt - 17.0 - dBm Notes: 1. Pulse measurement: PW 350 s, Duty Cycle 2% 2. Collector to base capacitance when the emitter grounded 3. MSG = S21 S12 hFE CLASSIFICATION <R> Rank Marking hFE Value FB/YFB T1G 130 to 260 R09DS0034EJ0300 Rev. 3.00 Jun 20, 2012 Page 2 of 12 NESG2021M05 TYPICAL CHARACTERISTICS (TA = +25C, unless otherwise specified) TOTAL POWER DISSIPATION vs. AMBIENT TEMPERATURE Total Power Dissipation Ptot (mW) 250 Mounted on Glass Epoxy PCB (1.08 cm2 x 1.0 mm (t) ) 200 175 150 100 50 0 75 100 125 150 0.2 0.1 0 2 4 6 8 10 COLLECTOR CURRENT vs. BASE TO EMITTER VOLTAGE COLLECTOR CURRENT vs. BASE TO EMITTER VOLTAGE 100 VCE = 1 V Collector Current IC (mA) 0.1 0.01 0.001 0.5 0.6 0.7 0.8 0.9 1.0 VCE = 2 V 10 1 0.1 0.01 0.001 0.0001 0.4 0.5 0.6 0.7 0.8 0.9 1.0 Base to Emitter Voltage VBE (V) Base to Emitter Voltage VBE (V) COLLECTOR CURRENT vs. BASE TO EMITTER VOLTAGE COLLECTOR CURRENT vs. COLLECTOR TO EMITTER VOLTAGE 35 VCE = 3 V 200 A 180 A 160 A 140 A 120 A 30 10 1 0.1 0.01 0.001 0.0001 0.4 f = 1 MHz Collector to Base Voltage VCB (V) 1 100 0.3 Ambient Temperature TA (C) 10 0.0001 0.4 Collector Current IC (mA) 50 Collector Current IC (mA) Collector Current IC (mA) 100 25 Reverse Transfer Capacitance Cre (pF) REVERSE TRANSFER CAPACITANCE vs. COLLECTOR TO BASE VOLTAGE 25 20 100 A 15 80 A 10 60 A 40 A 5 IB = 20 A 0.5 0.6 0.7 0.8 0.9 1.0 Base to Emitter Voltage VBE (V) 0 1 2 3 4 5 6 Collector to Emitter Voltage VCE (V) Remark The graph indicates nominal characteristics. R09DS0034EJ0300 Rev. 3.00 Jun 20, 2012 Page 3 of 12 NESG2021M05 DC CURRENT GAIN vs. COLLECTOR CURRENT DC CURRENT GAIN vs. COLLECTOR CURRENT 1 000 1 000 100 10 0.1 VCE = 2 V DC Current Gain hFE DC Current Gain hFE VCE = 1 V 1 10 100 100 10 0.1 1 10 100 Collector Current IC (mA) Collector Current IC (mA) DC CURRENT GAIN vs. COLLECTOR CURRENT 1 000 DC Current Gain hFE VCE = 3 V 100 10 0.1 1 10 100 Collector Current IC (mA) Remark The graph indicates nominal characteristics. R09DS0034EJ0300 Rev. 3.00 Jun 20, 2012 Page 4 of 12 NESG2021M05 GAIN BANDWIDTH PRODUCT vs. COLLECTOR CURRENT Gain Bandwidth Product fT (GHz) 20 15 10 5 0 1 Gain Bandwidth Product fT (GHz) 30 25 10 10 5 10 100 GAIN BANDWIDTH PRODUCT vs. COLLECTOR CURRENT INSERTION POWER GAIN, MAG, MSG vs. FREQUENCY 15 10 5 0 1 Insertion Power Gain |S21e|2 (dB) Maximum Available Power Gain MAG (dB) Maximum Stable Power Gain MSG (dB) 15 Collector Current IC (mA) 20 10 100 40 VCE = 1 V IC = 10 mA 35 30 MSG MAG 25 20 15 |S21e|2 10 5 0 0.1 1 10 100 Collector Current IC (mA) Frequency f (GHz) INSERTION POWER GAIN, MAG, MSG vs. FREQUENCY INSERTION POWER GAIN, MAG, MSG vs. FREQUENCY 40 VCE = 2 V IC = 10 mA 35 MSG MAG 25 20 |S21e|2 15 10 5 0 0.1 20 Collector Current IC (mA) VCE = 3 V f = 2 GHz 30 25 VCE = 2 V f = 2 GHz 0 1 100 Insertion Power Gain |S21e|2 (dB) Maximum Available Power Gain MAG (dB) Maximum Stable Power Gain MSG (dB) 25 30 VCE = 1 V f = 2 GHz 1 10 100 Frequency f (GHz) Insertion Power Gain |S21e|2 (dB) Maximum Available Power Gain MAG (dB) Maximum Stable Power Gain MSG (dB) Gain Bandwidth Product fT (GHz) 30 GAIN BANDWIDTH PRODUCT vs. COLLECTOR CURRENT 40 VCE = 3 V IC = 10 mA 35 30 MSG MAG 25 20 |S21e|2 15 10 5 0 0.1 1 10 100 Frequency f (GHz) Remark The graph indicates nominal characteristics. R09DS0034EJ0300 Rev. 3.00 Jun 20, 2012 Page 5 of 12 NESG2021M05 25 VCE = 1 V f = 1 GHz MSG MAG 20 |S21e|2 15 10 5 0 1 10 100 Insertion Power Gain |S21e|2 (dB) Maximum Available Power Gain MAG (dB) Maximum Stable Power Gain MSG (dB) 30 INSERTION POWER GAIN, MAG, MSG vs. COLLECTOR CURRENT 30 25 VCE = 1 V f = 2 GHz MSG MAG 20 15 |S21e|2 10 5 0 1 10 100 Collector Current IC (mA) INSERTION POWER GAIN, MAG, MSG vs. COLLECTOR CURRENT INSERTION POWER GAIN, MAG vs. COLLECTOR CURRENT 30 25 VCE = 1 V f = 3 GHz MSG 20 MAG 15 10 |S21e| 5 0 1 2 10 100 Insertion Power Gain |S21e|2 (dB) Maximum Available Power Gain MAG (dB) Collector Current IC (mA) 25 20 VCE = 1 V f = 5 GHz 15 MAG 10 5 |S21e|2 0 -5 1 10 100 Collector Current IC (mA) Collector Current IC (mA) INSERTION POWER GAIN, MAG, MSG vs. COLLECTOR CURRENT INSERTION POWER GAIN, MAG, MSG vs. COLLECTOR CURRENT 30 25 VCE = 2 V f = 1 GHz MSG 20 MAG |S21e|2 15 10 5 0 1 10 100 Collector Current IC (mA) Insertion Power Gain |S21e|2 (dB) Maximum Available Power Gain MAG (dB) Maximum Stable Power Gain MSG (dB) Insertion Power Gain |S21e|2 (dB) Maximum Available Power Gain MAG (dB) Maximum Stable Power Gain MSG (dB) Insertion Power Gain |S21e|2 (dB) Maximum Available Power Gain MAG (dB) Maximum Stable Power Gain MSG (dB) Insertion Power Gain |S21e|2 (dB) Maximum Available Power Gain MAG (dB) Maximum Stable Power Gain MSG (dB) INSERTION POWER GAIN, MAG, MSG vs. COLLECTOR CURRENT 30 25 VCE = 2 V f = 2 GHz MSG MAG 20 15 |S21e|2 10 5 0 1 10 100 Collector Current IC (mA) Remark The graph indicates nominal characteristics. R09DS0034EJ0300 Rev. 3.00 Jun 20, 2012 Page 6 of 12 NESG2021M05 25 VCE = 2 V f = 3 GHz MSG MAG 20 15 10 |S21e|2 5 0 1 10 100 Insertion Power Gain |S21e|2 (dB) Maximum Available Power Gain MAG (dB) 30 INSERTION POWER GAIN, MAG vs. COLLECTOR CURRENT 30 25 VCE = 2 V f = 5 GHz 20 MAG 15 10 |S21e|2 5 0 1 10 100 Collector Current IC (mA) INSERTION POWER GAIN, MAG, MSG vs. COLLECTOR CURRENT INSERTION POWER GAIN, MAG, MSG vs. COLLECTOR CURRENT 30 25 VCE = 3 V f = 1 GHz MSG 20 MAG |S21e|2 15 10 5 0 1 10 100 Insertion Power Gain |S21e|2 (dB) Maximum Available Power Gain MAG (dB) Maximum Stable Power Gain MSG (dB) Collector Current IC (mA) 30 25 VCE = 3 V f = 2 GHz MSG MAG 20 |S21e|2 15 10 5 0 1 10 100 Collector Current IC (mA) Collector Current IC (mA) INSERTION POWER GAIN, MAG, MSG vs. COLLECTOR CURRENT INSERTION POWER GAIN, MAG vs. COLLECTOR CURRENT 30 25 VCE = 3 V f = 3 GHz MSG MAG 20 15 |S21e| 2 10 5 0 1 10 100 Collector Current IC (mA) Insertion Power Gain |S21e|2 (dB) Maximum Available Power Gain MAG (dB) Insertion Power Gain |S21e|2 (dB) Maximum Available Power Gain MAG (dB) Maximum Stable Power Gain MSG (dB) Insertion Power Gain |S21e|2 (dB) Maximum Available Power Gain MAG (dB) Maximum Stable Power Gain MSG (dB) Insertion Power Gain |S21e|2 (dB) Maximum Available Power Gain MAG (dB) Maximum Stable Power Gain MSG (dB) INSERTION POWER GAIN, MAG, MSG vs. COLLECTOR CURRENT 30 25 VCE = 3 V f = 5 GHz 20 MAG 15 10 |S21e|2 5 0 1 10 100 Collector Current IC (mA) Remark The graph indicates nominal characteristics. R09DS0034EJ0300 Rev. 3.00 Jun 20, 2012 Page 7 of 12 NESG2021M05 OUTPUT POWER, COLLECTOR CURRENT vs. INPUT POWER OUTPUT POWER, COLLECTOR CURRENT vs. INPUT POWER 20 50 20 10 30 5 20 IC 10 0 -15 -10 -5 0 0 Pout 5 10 0 -5 -20 -15 -10 -5 0 5 0 Input Power Pin (dBm) OUTPUT POWER, COLLECTOR CURRENT vs. INPUT POWER OUTPUT POWER, COLLECTOR CURRENT vs. INPUT POWER 50 Pout 10 30 5 20 IC 10 0 -15 -10 -5 0 0 Input Power Pin (dBm) Output Power Pout (dBm) 40 Collector Current IC (mA) VCE = 3 V, f = 5.2 GHz Icq = 12 mA (RF OFF) 15 -20 50 20 VCE = 3 V, f = 3 GHz Icq = 12 mA (RF OFF) Output Power Pout (dBm) 20 IC Input Power Pin (dBm) 20 -5 -25 30 10 40 15 Pout 10 30 5 20 IC 10 0 -5 -20 -15 -10 -5 0 Collector Current IC (mA) -20 40 15 Collector Current IC (mA) Pout Output Power Pout (dBm) 40 15 -5 -25 50 VCE = 3 V, f = 2 GHz Icq = 12 mA (RF OFF) Collector Current IC (mA) Output Power Pout (dBm) VCE = 3 V, f = 1 GHz Icq = 12 mA (RF OFF) 0 5 Input Power Pin (dBm) Remark The graph indicates nominal characteristics. R09DS0034EJ0300 Rev. 3.00 Jun 20, 2012 Page 8 of 12 NESG2021M05 4 20 3 15 2 10 NF 1 5 3 15 2 10 NF 0 1 NOISE FIGURE, ASSOCIATED GAIN vs. COLLECTOR CURRENT 30 25 Ga 20 3 15 2 10 5 6 30 VCE = 2 V f = 2 GHz 5 Noise Figure NF (dB) VCE = 1 V f = 2 GHz 1 1 25 Ga 4 20 3 15 2 10 1 5 NF NF 0 0 100 10 1 0 100 10 Collector Current IC (mA) Collector Current IC (mA) NOISE FIGURE, ASSOCIATED GAIN vs. COLLECTOR CURRENT NOISE FIGURE, ASSOCIATED GAIN vs. COLLECTOR CURRENT 12 14 8 8 6 6 4 4 1 10 12 12 10 NF VCE = 2 V f = 5.2 GHz Ga 10 2 14 Noise Figure NF (dB) VCE = 1 V f = 5.2 GHz Ga Associated Gain Ga (dB) 14 Noise Figure NF (dB) 0 100 10 NOISE FIGURE, ASSOCIATED GAIN vs. COLLECTOR CURRENT 4 0 5 Collector Current IC (mA) 5 Noise Figure NF (dB) 20 Collector Current IC (mA) 6 0 25 4 1 0 100 10 Ga 12 10 10 8 8 6 6 4 4 2 2 0 100 0 Collector Current IC (mA) 14 NF 1 Associated Gain Ga (dB) 1 30 VCE = 2 V f = 1 GHz 5 Noise Figure NF (dB) 25 Associated Gain Ga (dB) Ga Associated Gain Ga (dB) Noise Figure NF (dB) 5 0 6 30 VCE = 1 V f = 1 GHz Associated Gain Ga (dB) 6 NOISE FIGURE, ASSOCIATED GAIN vs. COLLECTOR CURRENT Associated Gain Ga (dB) NOISE FIGURE, ASSOCIATED GAIN vs. COLLECTOR CURRENT 2 10 0 100 Collector Current IC (mA) Remark The graph indicates nominal characteristics. R09DS0034EJ0300 Rev. 3.00 Jun 20, 2012 Page 9 of 12 NESG2021M05 NOISE FIGURE, ASSOCIATED GAIN vs. COLLECTOR CURRENT 6 Ga Noise Figure NF (dB) 5 25 4 20 3 15 2 10 1 0 5 NF 1 Associated Gain Ga (dB) 30 VCE = 3 V f = 1 GHz 0 100 10 Collector Current IC (mA) NOISE FIGURE, ASSOCIATED GAIN vs. COLLECTOR CURRENT 6 Noise Figure NF (dB) 5 25 Ga 4 20 3 15 2 10 1 0 5 NF 1 Associated Gain Ga (dB) 30 VCE = 3 V f = 2 GHz 0 100 10 Collector Current IC (mA) NOISE FIGURE, ASSOCIATED GAIN vs. COLLECTOR CURRENT VCE = 3 V f = 5.2 GHz Noise Figure NF (dB) 12 14 12 10 10 Ga 8 8 6 6 4 4 2 0 Associated Gain Ga (dB) 14 2 NF 1 10 0 100 Collector Current IC (mA) Remark The graphs indicate nominal characteristics. R09DS0034EJ0300 Rev. 3.00 Jun 20, 2012 Page 10 of 12 NESG2021M05 <R> S-PARAMETERS S-parameters and noise parameters are provided on our web site in a form (S2P) that enables direct import of the parameters to microwave circuit simulators without the need for keyboard inputs. Click here to download S-parameters. [Products] [RF Devices] [Device Parameters] URL http://www.renesas.com/products/microwave/ R09DS0034EJ0300 Rev. 3.00 Jun 20, 2012 Page 11 of 12 NESG2021M05 PACKAGE DIMENSIONS FLAT-LEAD 4-PIN THIN-TYPE SUPER MINIMOLD (M05, 2012 PKG) (UNIT: mm) (Top View) (Bottom View) 2.050.1 1.250.1 2 1 4 0.30+0.1 -0.05 T1G (0.65) 0.65 1.30 3 (1.05) 2.00.1 0.11+0.1 -0.05 0.5 0.590.05 <R> PIN CONNENTION 1. Base 2. Emitter 3. Collector 4. Emitter Remark ( ) : Reference value R09DS0034EJ0300 Rev. 3.00 Jun 20, 2012 Page 12 of 12 Revision History NESG2021M05 Data Sheet Description Rev. - 3.00 Date Mar 2003 Jun 20, 2012 Page - Summary Previous No. : PU10188EJ02V0DS p.1 Modification of ORDERING INFORMATION p.2 Modification of ELECTRICAL CHARACTERISTICS Modification of hFE CLASSIFICATION p.11 Modification of S-PARAMETERS p.12 Modification of PACKAGE DIMENSIONS All trademarks and registered trademarks are the property of their respective owners. C-1 Notice 1. Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software, and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits, software, or information. 2. Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics does not warrant that such information is error free. Renesas Electronics 3. Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights of third parties by or arising from the use of Renesas Electronics products or assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein. technical information described in this document. No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of Renesas Electronics or others. 4. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part. Renesas Electronics assumes no responsibility for any losses incurred by you or 5. Renesas Electronics products are classified according to the following two quality grades: "Standard" and "High Quality". The recommended applications for each Renesas Electronics product depends on third parties arising from such alteration, modification, copy or otherwise misappropriation of Renesas Electronics product. the product's quality grade, as indicated below. "Standard": Computers; office equipment; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots etc. "High Quality": Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti-crime systems; and safety equipment etc. Renesas Electronics products are neither intended nor authorized for use in products or systems that may pose a direct threat to human life or bodily injury (artificial life support devices or systems, surgical implantations etc.), or may cause serious property damages (nuclear reactor control systems, military equipment etc.). You must check the quality grade of each Renesas Electronics product before using it in a particular application. You may not use any Renesas Electronics product for any application for which it is not intended. Renesas Electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for which the product is not intended by Renesas Electronics. 6. You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or damages arising out of the use of Renesas Electronics products beyond such specified ranges. 7. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further, Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or systems manufactured by you. 8. Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations. 9. Renesas Electronics products and technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable domestic or foreign laws or regulations. You should not use Renesas Electronics products or technology described in this document for any purpose relating to military applications or use by the military, including but not limited to the development of weapons of mass destruction. When exporting the Renesas Electronics products or technology described in this document, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and regulations. 10. It is the responsibility of the buyer or distributor of Renesas Electronics products, who distributes, disposes of, or otherwise places the product with a third party, to notify such third party in advance of the contents and conditions set forth in this document, Renesas Electronics assumes no responsibility for any losses incurred by you or third parties as a result of unauthorized use of Renesas Electronics products. 11. This document may not be reproduced or duplicated in any form, in whole or in part, without prior written consent of Renesas Electronics. 12. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this document or Renesas Electronics products, or if you have any other inquiries. (Note 1) "Renesas Electronics" as used in this document means Renesas Electronics Corporation and also includes its majority-owned subsidiaries. (Note 2) "Renesas Electronics product(s)" means any product developed or manufactured by or for Renesas Electronics. http://www.renesas.com SALES OFFICES Refer to "http://www.renesas.com/" for the latest and detailed information. Renesas Electronics America Inc. 2880 Scott Boulevard Santa Clara, CA 95050-2554, U.S.A. Tel: +1-408-588-6000, Fax: +1-408-588-6130 Renesas Electronics Canada Limited 1101 Nicholson Road, Newmarket, Ontario L3Y 9C3, Canada Tel: +1-905-898-5441, Fax: +1-905-898-3220 Renesas Electronics Europe Limited Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K Tel: +44-1628-585-100, Fax: +44-1628-585-900 Renesas Electronics Europe GmbH Arcadiastrasse 10, 40472 Dusseldorf, Germany Tel: +49-211-65030, Fax: +49-211-6503-1327 Renesas Electronics (China) Co., Ltd. 7th Floor, Quantum Plaza, No.27 ZhiChunLu Haidian District, Beijing 100083, P.R.China Tel: +86-10-8235-1155, Fax: +86-10-8235-7679 Renesas Electronics (Shanghai) Co., Ltd. Unit 204, 205, AZIA Center, No.1233 Lujiazui Ring Rd., Pudong District, Shanghai 200120, China Tel: +86-21-5877-1818, Fax: +86-21-6887-7858 / -7898 Renesas Electronics Hong Kong Limited Unit 1601-1613, 16/F., Tower 2, Grand Century Place, 193 Prince Edward Road West, Mongkok, Kowloon, Hong Kong Tel: +852-2886-9318, Fax: +852 2886-9022/9044 Renesas Electronics Taiwan Co., Ltd. 13F, No. 363, Fu Shing North Road, Taipei, Taiwan Tel: +886-2-8175-9600, Fax: +886 2-8175-9670 Renesas Electronics Singapore Pte. Ltd. 1 harbourFront Avenue, #06-10, keppel Bay Tower, Singapore 098632 Tel: +65-6213-0200, Fax: +65-6278-8001 Renesas Electronics Malaysia Sdn.Bhd. Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No. 18, Jln Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia Tel: +60-3-7955-9390, Fax: +60-3-7955-9510 Renesas Electronics Korea Co., Ltd. 11F., Samik Lavied' or Bldg., 720-2 Yeoksam-Dong, Kangnam-Ku, Seoul 135-080, Korea Tel: +82-2-558-3737, Fax: +82-2-558-5141 (c) 2012 Renesas Electronics Corporation. All rights reserved. Colophon 2.0