EGP10A-EGP10K
EPG10A - EPG10K, Rev. C2001 Fairchild Semiconductor Corporation
EGP10A - EGP10K
Fast Rectifiers (Glass Passivated)
Absolute Maximum Ratings* TA = 25°C unless otherwise noted
*These ratings are limiting values above which the serviceability of any semiconductor device may be impaired.
Electrical Characteristics TA = 25°C unless otherwise noted
Features
Superfast recovery time for high
efficiency.
Low forward voltage, high current
capability.
Low leakage current.
High surge current capability.
DO-41
COLOR BAND DENOTES CATHODE
Thermal Characteristics
Symbol
Parameter
Value
Units
PD Power Dissipation 2.5 W
RθJA T hermal Resistance, Junction to Ambient 50 °C/W
Symbol
Parameter
Device
Units
10A 10B 10C 10D 10F 10G 10J 10K
VF Forward Voltage @ 1.0 A 0.95 1.25 1.7 V
trr Reverse Recovery Time
IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A 50
75 ns
IR Reverse Current @ rated VR TA = 25°C
TA = 125°C 5.0
100 µA
µA
CT Total Capacitance
V
R = 4.0 V, f = 1.0 MHz 22 15 pF
Symbol
Parameter
Value
Units
10A 10B 10C 10D 10F 10G 10J 10K
VRRM Maximum Repetitive Reverse Voltage 50 100 150 200 300 400 600 800 V
IF(AV) Average Rectifi ed Forward Current,
.375 " lead length @ TL = 55°C 1.0 A
IFSM Non-repetitive Peak Forward Surge Current
8.3 ms Single Half-Sine-Wave 30 A
Tstg Storage Temperature Range -65 to +150 °C
TJ Operating Junction Temperat ure -65 to +150 °C
EPG10A - EPG10K, Rev. C
EGP10A-EGP10K
2001 Fairchild Semiconductor Corporation
Typical Characteristics
Pulse
Generator
(Note 2)
50
NONINDUCTIVE 50
NONINDUCTIVE
DUT
(-)
(+)
OSCILLOSCOPE
(Note 1)
50
NONINDUCTIVE
50V
(approx)
NOTES:
1. Rise time = 7.0 ns max; Input impedance = 1.0 megaohm 22 pf.
2. Rise time = 10 ns max; Source impedance = 50 ohms.
Reverse Recovery Time Characterstic and Test Circuit Diagram
1.0cm SET TIME BASE FOR
trr
+0.5A
0
-0.25A
-1.0A
5/ 10 ns/ cm
1 2 5 10 20 50 100
0
5
10
15
20
25
30
Number of Cycles at 60Hz
Peak Forward Surge Current, IFSM [A]
0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8
0.01
0.1
1
10
50
Forward Voltage, VF [V]
Forward Current, IF [A]
P ulse Wi dth = 300µ
µµ
µs
2% Duty Cycle
T = 25 C
º
A
EGP10A-EGP10D
EGP10F-EGP10K
T = 150 C
º
A
0 20406080100120140
0.01
0.1
1
10
100
1000
Percent of Rated Peak Reverse Voltage [%]
Reverse Current, IR [mA]
T = 25 C
º
A
T = 10 0 C
º
A
T = 12 5 C
º
A
0.1 1 10 100 1000
0
10
20
30
40
50
60
Reverse Voltage, VR [V]
Total Capacitance, CT [pF]
EGP10F-EGP1 0K
EGP10A-EGP10D
25 50 75 100 125 150 175
0
0.25
0.5
0.75
1
Lead Temperature [ºC]
Average Rectified Forward Current, IF [A]
SINGLE PHASE
HA LF WAV E
60 HZ
RESISTIVE OR
INDUCTIVE LOAD
.375" (9.0mm) LEAD
LENGTH S
Figure 1. Forward Current Derating Curve Figure 2. Non-Repetitive Surge Current
Figure 3. Forward Voltage Characteristics Figure 4. Reverse Current vs Reverse Voltage
Figure 5. Total Capacitance
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER
NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD
DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT
OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT
RIGHTS, NOR THE RIGHTS OF OTHERS.
TRADEMARKS
The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is
not intended to be an exhaustive list of all such trademarks.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.
As used herein:
1. Life support devices or systems are devices or
systems which, (a) are intended for surgical implant into
the body, or (b) support or sustain life, or (c) whose
failure to perform when properly used in accordance
with instructions for use provided in the labeling, can be
reasonably expected to result in significant injury to the
user.
2. A critical component is any component of a life
support device or system whose failure to perform can
be reasonably expected to cause the failure of the life
support device or system, or to affect its safety or
effectiveness.
PRODUCT STATUS DEFINITIONS
Definition of Terms
Datasheet Identification Product Status Definition
Advance Information
Preliminary
No Identification Needed
Obsolete
This datasheet contains the design specifications for
product development. Specifications may change in
any manner without notice.
This datasheet contains preliminary data, and
supplementary data will be published at a later date.
Fairchild Semiconductor reserves the right to make
changes at any time without notice in order to improve
design.
This datasheet contains final specifications. Fairchild
Semiconductor reserves the right to make changes at
any time without notice in order to improve design.
This datasheet contains specifications on a product
that has been discontinued by Fairchild semiconductor.
The datasheet is printed for reference information only.
Formative or
In Design
First Production
Full Production
Not In Production
OPTOLOGIC™
OPTOPLANAR™
PACMAN™
POP™
Power247™
PowerTrench
QFET™
QS™
QT Optoelectronics™
Quiet Series™
SILENT SWITCHER
FAST
FASTr™
FRFET™
GlobalOptoisolator™
GTO™
HiSeC™
ISOPLANAR™
LittleFET™
MicroFET™
MicroPak™
MICROWIRE™
Rev. H4
ACEx™
Bottomless™
CoolFET™
CROSSVOLT
DenseTrench™
DOME™
EcoSPARK™
E2CMOSTM
EnSignaTM
FACT™
FACT Quiet Series™
SMART START™
STAR*POWER™
Stealth™
SuperSOT™-3
SuperSOT™-6
SuperSOT™-8
SyncFET™
TinyLogic™
TruTranslation™
UHC™
UltraFET
STAR*POWER is used under license
VCX™