Roving Networks | RN-XV 1-408-395-5300 Products | Applications | Technology | Sales | Support | About | Contact Search | Wi-Fi Products | Wi-Fi Modules PRODUCTS RN-XV WI-FI PRODUCTS 802.11 b/g replacement for 802.15.4 systems Wi-Fi Modules REQUEST INFO RN-XV RN-131 RN-174 RN-171 DESCRIPTION RN-121 RN-123 RN-125 RN-134 Wi-Fi Adapters Wi-Fi Solutions Wi-Fi Development Tools BLUETOOTH PRODUCTS Bluetooth Modules Bluetooth Adapters Bluetooth Solutions Bluetooth Development Tools ACCESSORIES Antennas RESOURCES The RN-XV module is a certified Wi-Fi solution especially designed for customer who want to migrate their existing 80.15.4 architecture to a standard TCP/IP based platform without having to redesign their existing hardware. Data Sheets * RN-XV (PDF) The RN-XV module is based upon Roving Networks' robust RN-171 Wi-Fi module and incorporates 802.11 b/g radio, 32 bit processor, TCP/IP stack, real-time clock, crypto accelerator, power management unit and analog sensor interface. Presentations * WiFLY Training Presentation (PDF) The RN-XV module supports infrastructure networking for worldwide internet access directly by every node and adhoc connectivity for fully connected point to point networks, unlike many 802.15.4 implementations that need extensive, custom application profiles and additional bridging products. The RN-XV supports industrial temperature ranges, making it ideal for applications such as sensor networks, industrial or commercial controllers, utility meters, and M2M applications. The module offers additional functionality through its on-board programmable GPIOs (8) and ADCs (3). The ADCs provide 14-bit resolution while the GPIOs can be configured to provide standard functionality or status signaling to a host microcontroller to reduce the need for serial polling between the Wi-Fi module and host microcontroller. Certifications * RN-171 (ZIP) Application Notes * Wi-Fi Protected Setup (WPS) (PDF) > MORE RESOURCES... The module is pre-loaded with Roving firmware to simplify integration and minimize development time of your application. In the simplest configuration, the hardware only requires four connections (PWR, TX, RX and GND) to create a wireless data connection. Power Supplies Cables Contact: Address: Roving Networks, Inc 102 Cooper Court Los Gatos, CA 95032 USA Tel: 1-408-395-5300 Fax: 1-603-843-7550 Contact Roving Networks: Select Select OneOne Developers can opt to use the RN-174 evaluation board for prototyping and designing their Wi-Fi systems based on the RN-XVee. The RN-174-K kit includes the RN-171 module mounted on a carrier board with status LEDs, power regulation, and a serial link to a PC. Features Specifications Related Products BUY Show All FEATURES Direct Internet connectivity provides internet access to every node Point to point connectivity to every node without the need for custom profiles Based on common 802.15.4 footprint Ultra low power: 4uA sleep mode, 38mA active Onboard TCP/IP stack includes DHCP, UDP, DNS, ARP, ICMP, HTTP client, FTP client and TCP Firmware configurable transmit power: 0dBm to 12dBm Hardware interfaces:TTL UART Host data rate up to 464Kbps over UART Supports Adhoc and infrastructure networking 8 general purpose digital I/O 3 analog sensor inputs Real-time clock for time-stamping, auto-sleep, and auto-wakeup modes Accepts 3.3VDC regulated power supply Configuration over UART or wireless interface (via Telnet) using simple ASCII commands Over the air firmware upgrade (FTP) Secure WiFi authentication: WEP, WPA-TKIP , WPA2-AES http://www.rovingnetworks.com/products/RN_XV[2/23/2012 11:11:35 AM] Roving Networks | RN-XV APPLICATIONS Industrial metering HVAC control Room temperature sensors Pump configuration and control Telemetry Robotics PV / Solar controllers (c) 2012 Roving Networks Inc. All rights reserved. http://www.rovingnetworks.com/products/RN_XV[2/23/2012 11:11:35 AM] Contact | FAQs | Resources | Privacy Policy | Terms of Use | Site Map | Login