Multi- Aperture cores (2867002402) Part Number: 2867002402 67 MULTI- APERTURE CORE Explanation of Part Numbers: -Digits 1 & 2 = Product Class - Digits 3 & 4 = Material Grade - Last digit 2 = Burnished Multi- aperture cores are used in suppression applications and in balun (balance- unbalance) and other broadband transformers. They are also employed in airbag designs to prevent accidental activation. All multi- aperture cores are supplied burnished. Our "Multi- Aperture Core Kit" (part number 0199000036) is available for prototype evaluation. For any multi- aperture requirement not listed here, feel free to contact our customer service group for availability and pricing. Catalog Drawing 3D Model Weight: 0.5 (g) Dim mm mm tol A 7 0.25 B 6.2 0.25 C 4.2 -0.25 E 2.9 0.10 H 1.7 +0.20 nominal inch 0.276 0.244 0.16 0.114 0.071 inch misc. _ _ _ _ _ Chart Legend + Test frequency Electrical Properties AL(nH) 48 Min Multi- aperture cores in 73 and 43 materials are controlled for impedance only. The 61 NiZn material is controlled for both impedance and AL value. The high frequency 67 material is controlled for AL value. Minimum impedance values are specified for the + marked frequencies. The minimum impedance is listed on our catalog drawing. Catalog Drawing Multi- aperture cores in 73 and 43 material are measured for impedance on the E4990A Impedance Analyzer. The 61 and 67 multi- aperture cores are tested on the E4991A / HP4291B Impedance Analyzer. All impedance measurements are performed with a single turn to both holes, using the shortest practical wire length. The 61 and 67 material multi- hole beads are tested for AL value. The test frequency is 10 kHz at < 10 gauss. The test winding is five turns wound through both holes. CSV Download Fair- Rite Products Corp. * One Commercial Row, Wallkill, New York 12589-0288 888-324-7748 * 845-895-2055 * Fax: 845-895-2629 * ferrites@fair- rite.com * www.fair- rite.com