General Description
The LM4040 is a precision two-terminal shunt mode,
bandgap voltage reference available in fixed reverse
breakdown voltages of 2.048V, 2.500V, 3.000V, 4.096V,
and 5.000V. Ideal for space-critical applications, the
LM4040 is offered in the subminiature 3-pin SC70 sur-
face-mount package (1.8mm 1.8mm), 50% smaller
than comparable devices in SOT23 surface-mount
packages (SOT23 versions are also available).
Laser-trimmed resistors ensure precise initial accuracy.
With a 100ppm/°C temperature coefficient, the device
is offered in four grades of initial accuracy ranging from
0.1% to 1%. The LM4040 has a 60µA to 15mA shunt
current capability with low dynamic impedance, ensur-
ing stable reverse breakdown voltage accuracy over a
wide range of operating temperatures and currents.
The LM4040 does not require an external stabilizing
capacitor while ensuring stability with any capacitive
load.
For a 1.225V output version, refer to the LM4041 data
sheet.
________________________Applications
Portable, Battery-Powered Equipment
Notebook Computers
Cell Phones
Industrial Process Controls
Features
Ultra-Small 3-Pin SC70 Package
0.1% max Initial Accuracy
100ppm/°C max Temperature Coefficient
Guaranteed over -40°C to +85°C Temperature
Range
Wide Operating Current Range: 60µA to 15mA
Low 28µVRMS Output Noise (10Hz to 10kHz)
2.048V, 2.500V, 3.000V, 4.096V, and 5.000V Fixed
Reverse Breakdown Voltage
No Output Capacitors Required
Tolerates Capacitive Loads
LM4040
Improved Precision Micropower Shunt Voltage
Reference with Multiple Reverse Breakdown Voltages
________________________________________________________________ Maxim Integrated Products 1
-
1
3N.C.*
+
LM4040
SC70-3/SOT23-3
TOP VIEW
2
*PIN 3 MUST BE LEFT FLOATING
OR CONNECTED TO PIN 2.
PART TEMP.
RANGE
PIN-
PACKAGE
OUTPUT
VOLTAGE
(V)
LM4040_IX3-2.1 - 40°C to + 85°C 3 S OT23- 3 2.048
LM4040_IX3-2.1 - 40°C to + 85°C 3 S C 70- 3 2.048
LM4040_IM3-2.5 - 40°C to + 85°C 3 S OT23- 3 2.500
LM4040_IX3-2.5 - 40°C to + 85°C 3 S C 70- 3 2.500
LM4040_IM3-3.0 - 40°C to + 85°C 3 S OT23- 3 3.000
LM4040_IX3-3.0 - 40°C to + 85°C 3 S C 70- 3 3.000
LM4040_IM3-4.1 - 40°C to + 85°C 3 S OT23- 3 4.096
LM4040_IX3-4.1 - 40°C to + 85°C 3 S C 70- 3 4.096
LM4040_IM3-5.0 - 40°C to + 85°C 3 S OT23- 3 5.000
LM4040_IX3-5.0 - 40°C to + 85°C 3 S C 70- 3 5.000
Pin Configuration
Selector Guide
19-1787; Rev 0; 8/00
For free samples and the latest literature, visit www.maxim-ic.com or phone 1-800-998-8800.
For small orders, phone 1-800-835-8769.
Ordering Information appears at end of data sheet.
LM4040
Improved Precision Micropower Shunt Voltage
Reference with Multiple Reverse Breakdown Voltages
2 _______________________________________________________________________________________
ABSOLUTE MAXIMUM RATINGS
ELECTRICAL CHARACTERISTICSLM4040_I_3-2.1
(IR= 100µA, TA= TMIN to TMAX, unless otherwise noted. Typical values are at TA= +25°C.) (Note 1)
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
Reverse Current (cathode to anode) ..................................20mA
Forward Current (anode to cathode) ..................................10mA
ESD per Method 3015.7
Human Body Model .......................................................2000V
Machine Model.................................................................200V
Continuous Power Dissipation (TA= +70°C)
3-Pin SC70 (derate 2.17mW/°C above +70°C)............174mW
3-Pin SOT23 (derate 4.01mW/°C above +70°C)..........320mW
Operating Temperature Range ..........................-40°C to +85°C
Storage Temperature Range .............................-65°C to +150°C
Junction Temperature......................................................+150°C
Lead Temperature (soldering, 10s)..................................+300°C
PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS
LM4040A (0.1%) 2.046 2.048 2.050
LM4040B (0.2%) 2.044 2.048 2.052
LM4040C (0.5%) 2.038 2.048 2.058
Reverse Breakdown Voltage VRTA = +25°C
LM4040D (1.0%) 2.028 2.048 2.068
V
LM4040A ±2.0 ±15
LM4040B ±4.0 ±17
LM4040C ±10 ±23
Reverse Breakdown Voltage
Tolerance (Note 2) VR
LM4040D ±20 ±41
mV
LM4040A/B/C 45 65
Minimum Operating Current IRMIN LM4040D 45 70 µA
IR = 10mA ±20
LM4040A/B/C ±15 ±100
IR = 1mA LM4040D ±15 ±150
Average Reverse Voltage
Temperature Coefficient
(Note 2)
VR/T
IR = 100µA±15
ppm/°C
LM4040A/B/C 0.3 1.0
IRMIN IR 1mA LM4040D 0.3 1.2
LM4040A/B/C 2.5 8.0
Reverse Breakdown Voltage
Change with Operating
Current Change
VR/IR
1mA IR 15mA LM4040D 2.5 10.0
mV
LM4040A/B 0.3 0.8
LM4040C 0.3 0.9
Reverse Dynamic
Impedance (Note 3) ZRIR = 1mA, f = 120Hz,
IAC = 0.1IRLM4040D 0.3 1.1
Wideband Noise eNIR = 100µA, 10Hz f 10kHz 28 µVRMS
Reverse Breakdown Voltage
Long-Term Stability VRT = 1000h 120 ppm
LM4040
Improved Precision Micropower Shunt Voltage
Reference with Multiple Reverse Breakdown Voltages
_______________________________________________________________________________________ 3
ELECTRICAL CHARACTERISTICSLM4040_I_3-2.5
(IR= 100µA, TA= TMIN to TMAX, unless otherwise noted. Typical values are at TA= +25°C.) (Note 1)
PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS
LM4040A (0.1%) 2.4975 2.5000 2.5025
LM4040B (0.2%) 2.4950 2.5000 2.5050
LM4040C (0.5%) 2.4875 2.5000 2.5125
Reverse Breakdown Voltage VRTA = +25°C
LM4040D (1.0%) 2.2500 2.5000 2.7500
V
LM4040A ±2.0 ±19
LM4040B ±4.0 ±21
LM4040C ±10 ±29
Reverse Breakdown Voltage
Tolerance (Note 2) VR
LM4040D ±20 ±49
mV
LM4040A/B/C 45 65
Minimum Operating Current IRMIN LM4040D 45 70 µA
IR = 10mA ±20
LM4040A/B/C ±15 ±100
IR = 1mA LM4040D ±15 ±150
Average Reverse Voltage
Temperature Coefficient
(Note 2)
VR/T
IR = 100µA±15
ppm/°C
LM4040A/B/C 0.3 1.0
IRMIN IR 1mA LM4040D 0.4 1.2
LM4040A/B/C 2.5 8.0
Reverse Breakdown Voltage
Change with Operating
Current Change
VR/IR
1mA IR 15mA LM4040D 2.5 10.0
mV
LM4040A/B 0.3 0.8
LM4040C 0.3 0.9
Reverse Dynamic
Impedance (Note 3) ZRIR = 1mA, f = 120Hz,
IAC = 0.1IRLM4040D 0.3 1.1
Wideband Noise eNIR = 100µA, 10Hz f 10kHz 35 µVRMS
Reverse Breakdown Voltage
Long-Term Stability VRT = 1000h 120 ppm
LM4040
Improved Precision Micropower Shunt Voltage
Reference with Multiple Reverse Breakdown Voltages
4 _______________________________________________________________________________________
ELECTRICAL CHARACTERISTICSLM4040_I_3-3.0
(IR= 100µA, TA= TMIN to TMAX, unless otherwise noted. Typical values are at TA= +25°C.) (Note 1)
PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS
LM4040A (0.1%) 2.997 3.000 3.003
LM4040B (0.2%) 2.994 3.000 3.006
LM4040C (0.5%) 2.985 3.000 3.015
Reverse Breakdown Voltage VRTA = +25°C
LM4040D (1.0%) 2.970 3.000 3.030
V
LM4040A ±3.0 ±22
LM4040B ±6.0 ±26
LM4040C ±15 ±34
Reverse Breakdown Voltage
Tolerance (Note 2) VR
LM4040D ±30 ±59
mV
LM4040A/B/C 45 67
Minimum Operating Current IRMIN LM4040D 45 70 µA
IR = 10mA ±20
LM4040A/B/C ±15 ±100
IR = 1mA LM4040D ±15 ±150
Average Reverse Voltage
Temperature Coefficient
(Note 2)
VR/T
IR = 100µA±15
ppm/°C
LM4040A/B/C 0.3 1.0
IRMIN IR 1mA LM4040D 0.3 1.2
LM4040A/B/C 2.5 8.0
Reverse Breakdown Voltage
Change with Operating
Current Change
VR/IR
1mA IR 15mA LM4040D 2.5 10.0
mV
LM4040A/B 0.3 0.8
LM4040C 0.3 0.9
Reverse Dynamic
Impedance (Note 3) ZRIR = 1mA, f = 120Hz,
IAC = 0.1IRLM4040D 0.3 1.1
Wideband Noise eNIR = 100µA, 10Hz f 10kHz 45 µVRMS
Reverse Breakdown Voltage
Long-Term Stability VRT = 1000h 120 ppm
LM4040
Improved Precision Micropower Shunt Voltage
Reference with Multiple Reverse Breakdown Voltages
_______________________________________________________________________________________ 5
ELECTRICAL CHARACTERISTICSLM4040_I_3-4.1
(IR= 100µA, TA= TMIN to TMAX, unless otherwise noted. Typical values are at TA= +25°C.) (Note 1)
PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS
LM4040A (0.1%) 4.092 4.096 4.100
LM4040B (0.2%) 4.088 4.096 4.104
LM4040C (0.5%) 4.076 4.096 4.116
Reverse Breakdown Voltage VRTA = +25°C
LM4040D (1.0%) 4.055 4.096 4.137
V
LM4040A ±4.1 ±31
LM4040B ±8.2 ±35
LM4040C ±20 ±47
Reverse Breakdown Voltage
Tolerance (Note 2) VR
LM4040D ±41 ±81
mV
LM4040A/B/C 50 73
Minimum Operating Current IRMIN LM4040D 50 78 µA
IR = 10mA ±30
LM4040A/B/C ±20 ±100
IR = 1mA LM4040D ±20 ±150
Average Reverse Voltage
Temperature Coefficient
(Note 2)
VR/T
IR = 100µA±15
ppm/°C
LM4040A/B/C 0.5 1.2
IRMIN IR 1mA LM4040D 0.5 1.5
LM4040A/B/C 3.0 10.0
Reverse Breakdown Voltage
Change with Operating
Current Change
VR/IR
1mA IR 15mA LM4040D 3.0 13.0
mV
LM4040A/B/C 0.5 1.0
Reverse Dynamic
Impedance (Note 3) ZRIR = 1mA, f = 120Hz,
IAC = 0.1IRLM4040D 0.5 1.3
Wideband Noise eNIR = 100µA, 10Hz f 10kHz 28 µVRMS
Reverse Breakdown Voltage
Long-Term Stability VRT = 1000h 120 ppm
LM4040
Improved Precision Micropower Shunt Voltage
Reference with Multiple Reverse Breakdown Voltages
6 _______________________________________________________________________________________
Note 1: All devices are 100% production tested at +25°C and are guaranteed by design for TA= TMIN to TMAX, as specified.
Note 2: The overtemperature limit for Reverse Breakdown Voltage Tolerance is defined as the room-temperature Reverse
Breakdown Voltage Tolerance ±[(VR/ T)(maxT)(VR)], where VR/ T is the VRtemperature coefficient, maxT is the
maximum difference in temperature from the reference point of +25°C to TMIN or TMAX, and VRis the reverse breakdown
voltage. The total overtemperature tolerance for the different grades in the temperature range where maxT = +65°C is
shown below:
A grade: ±0.75% = ±0.1% ±100 ppm/°C 65°C
B grade: ±0.85% = ±0.2% ±100 ppm/°C 65°C
C grade: ±1.15% = ±0.5% ±100 ppm/°C 65°C
D grade: ±1.98% = ±1.0% ±150 ppm/°C 65°C
Note 3: Guaranteed by design.
ELECTRICAL CHARACTERISTICSLM4040_I_3-5.0
(IR= 100µA, TA= TMIN to TMAX, unless otherwise noted. Typical values are at TA= +25°C.) (Note 1)
PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS
LM4040A (0.1%) 4.995 5.000 5.005
LM4040B (0.2%) 4.990 5.000 5.010
LM4040C (0.5%) 4.975 5.000 5.025
Reverse Breakdown Voltage VRTA = +25°C
LM4040D (1.0%) 4.950 5.000 5.050
V
LM4040A ±5.0 ±38
LM4040B ±10 ±43
LM4040C ±25 ±58
Reverse Breakdown Voltage
Tolerance (Note 2) VR
LM4040D ±50 ±99
mV
LM4040A/B/C 54 80
Minimum Operating Current IRMIN LM4040D 54 85 µA
IR = 10mA ±30
LM4040A/B/C ±20 ±100
IR = 1mA LM4040D ±20 ±150
Average Reverse Voltage
Temperature Coefficient
(Note 2)
VR/T
IR = 100µA±15
ppm/°C
LM4040A/B/C 0.5 1.4
IRMIN IR 1mA LM4040D 0.5 1.8
LM4040A/B/C 3.5 12.0
Reverse Breakdown Voltage
Change with Operating
Current Change
VR/IR
1mA IR 15mA LM4040D 3.5 15.0
mV
LM4040A/B/C 0.5 1.1
Reverse Dynamic
Impedance (Note 3) ZRIR = 1mA, f = 120Hz,
IAC = 0.1IRLM4040D 0.5 1.5
Wideband Noise eNIR = 100µA, 10Hz f 10kHz 80 µVRMS
Reverse Breakdown Voltage
Long-Term Stability VRT = 1000h 120 ppm
LM4040
Improved Precision Micropower Shunt Voltage
Reference with Multiple Reverse Breakdown Voltages
_______________________________________________________________________________________ 7
-2.8
-1.6
-2.0
-2.4
-1.2
-0.8
-0.4
0
0.4
-40 10-15 35 60 85
LM4040-2.5V
TEMPERATURE DRIFT
LM4040-02
TEMPERATURE (°C)
REVERSE VOLTAGE CHANGE (mV)
-6
-4
-5
-3
-2
-1
0
1
-40 10-15 35 60 85
LM4040-5.0V
TEMPERATURE DRIFT
LM4040-03
TEMPERATURE (°C)
REVERSE VOLTAGE CHANGE (mV)
Typical Operating Characteristics
(IR= 100µA, SC70-3 package, TA= +25°C, unless otherwise noted.)
0
1
2
3
4
5
6
050100
REVERSE CHARACTERISTICS AND
MINIMUM OPERATING CURRENT
LM4040-01
REVERSE CURRENT (µA)
REVERSE VOLTAGE (V)
LM4040_I_3-5.0
LM4040_I_3-4.1
LM4040_I_3-3.0
LM4040_I_3-2.5
LM4040_I_3-2.1
0
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
0 5 10 15 20
LM4040-5.0V
REVERSE VOLTAGE vs. ISHUNT
LM4040-05
ISHUNT (mA)
REVERSE VOLTAGE CHANGE (mV)
0.5
TA = -40°C
TA = +25°C
TA = +85°C
0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
0 5 10 15 20
LM4040-2.5V
REVERSE VOLTAGE vs. ISHUNT
LM4040-04
ISHUNT (mA)
REVERSE VOLTAGE CHANGE (mV)
1.0
0.5
TA = +85°C
TA = +25°C
TA = -40°C
LM4040
Improved Precision Micropower Shunt Voltage
Reference with Multiple Reverse Breakdown Voltages
8 _______________________________________________________________________________________
VGEN
VR AC-COUPLED
+25µA
-25µA
10mV/div
LM4040-5.0V
LOAD-TRANSIENT RESPONSE
LM4040-07
40µs/div
ISHUNT = 100µA ± 25µA
RL = 100kΩ, SEE FIGURE 1
VGEN
VR AC-COUPLED
+250µA
-250µA
10mV/div
LM4040-2.5V
LOAD-TRANSIENT RESPONSE
LM4040-08
10µs/div
ISHUNT = 1mA ± 250µA
RL = 10kΩ, SEE FIGURE 1
Typical Operating Characteristics (continued)
(IR= 100µA, SC70-3 package, TA= +25°C, unless otherwise noted.)
VGEN
VR AC-COUPLED
+25µA
-25µA
2mV/div
LM4040-2.5V
LOAD-TRANSIENT RESPONSE
LM4040-06
10µs/div
CH1: VGEN 2V/div
CH2: VR AC-COUPLED 2mV/div
ISHUNT = 100µA ± 25µA, RL = 100kΩ, SEE FIGURE 1
VGEN
VR AC-COUPLED
+2.5mA
-2.5mA
20mV/div
LM4040-2.5V
LOAD-TRANSIENT RESPONSE
LM4040-10
10µs/div
ISHUNT = 10mA ± 2.5mA
RL = 1kΩ, SEE FIGURE 1
VGEN
VR AC-COUPLED
+2.5mA
-2.5mA
20mV/div
LM4040-5.0V
LOAD-TRANSIENT RESPONSE
LM4040-11
10µs/div
ISHUNT = 10mA ± 2.5mA
RL = 1kΩ, SEE FIGURE 1
VGEN
VR AC-COUPLED
+250µA
-250µA
10mV/div
LM4040-5.0V
LOAD-TRANSIENT RESPONSE
LM4040-09
10µs/div
ISHUNT = 1mA ± 250µA
RL = 10kΩ, SEE FIGURE 1
1k
VB
+
-
ISHUNT
VR
RL
VGEN
Figure 1. Load-Transient Test Circuit
LM4040
Improved Precision Micropower Shunt Voltage
Reference with Multiple Reverse Breakdown Voltages
_______________________________________________________________________________________ 9
VIN
VOUT
LM4040-5.0V
STARTUP CHARACTERISTICS
LM4040-13
0405020 3010 60 70 80 90
RESPONSE TIME (µs)
5V
0
0
4V
2V
RS = 16k
SEE FIGURE 2
0.1 101 100 1000
LM4040-2.5V
OUTPUT IMPEDANCE vs. FREQUENCY
LM4040-14
FREQUENCY (Hz)
IMPEDANCE ()
1000
0.1
1
10
100
IR = 150µA
IR = 1mA
C1 = 1µF
C1 = 0
Typical Operating Characteristics (continued)
(IR= 100µA, SC70-3 package, TA= +25°C, unless otherwise noted.)
VIN
VOUT
LM4040-2.5V
STARTUP CHARACTERISTICS
LM4040-12
01620812424283236
RESPONSE TIME (µs)
5V
0
0
2V
1V
RS = 30k
SEE FIGURE 2
110010 1000 10,000
LM4040-2.5V
NOISE vs. FREQUENCY
LM4040-16
FREQUENCY (Hz)
10,000
100
1000
NOISE (nV/Hz)
1 10010 1000 10,000
LM4040-5.0V
NOISE vs. FREQUENCY
LM4040-17
FREQUENCY (Hz)
10,000
100
1000
NOISE (nV/Hz)
0.1 101 100 1000
LM4040-5.0V
OUTPUT IMPEDANCE vs. FREQUENCY
LM4040-15
FREQUENCY (Hz)
IMPEDANCE ()
100
0.1
1
10 IR = 150µA
IR = 1mA
C1 = 0
C1 = 1µF
RS
VIN
1Hz RATE
50%
DUTY CYCLE
VR
Figure 2. Startup Characteristics Test Circuit
LM4040
Improved Precision Micropower Shunt Voltage
Reference with Multiple Reverse Breakdown Voltages
10 ______________________________________________________________________________________
Detailed Description
The LM4040 shunt references use the bandgap princi-
ple to produce a stable, accurate voltage. The device
behaves similarly to an ideal zener diode; a fixed volt-
age is maintained across its output terminals when
biased with 60µA to 15mA of reverse current. The
LM4040 behaves similarly to a silicon diode when
biased with forward currents up 10mA.
Figure 3 shows a typical operating circuit. The LM4040
is ideal for providing a stable reference from a high-
voltage power supply.
Applications Information
The LM4040s internal pass transistor is used to main-
tain a constant output voltage (VSHUNT) by sinking the
necessary amount of current across a source resistor.
The source resistance (RS) is determined from the load
current (ILOAD) range, supply voltage (VS) variations,
VSHUNT, and desired quiescent current.
Choose the value of RSwhen VSis at a minimum and
ILOAD is at a maximum. Maintain a minimum ISHUNT of
60µA at all times. The RSvalue should be large enough
to keep ISHUNT less than 15mA for proper regulation
when VSis maximum and ILOAD is at a minimum. To
prevent damage to the device, ISHUNT should never
exceed 20mA.
Therefore, the value of RSis bounded by the following
equation:
[VS(MIN) - VR] / [60µA + ILOAD(MAX)] > RS>
[VS(MAX) - VR] / [20mA + ILOAD(MIN)]
Choosing a larger resistance minimizes the total power
dissipation in the circuit by reducing the shunt current
(PD(TOTAL) = VSISHUNT). Provide a safety margin to
incorporate the worst-case tolerance of the resistor
used. Ensure that the resistors power rating is ade-
quate, using the following general power equation:
PDR= ISHUNT (VS(MAX) - VSHUNT)
Output Capacitance
The LM4040 does not require an external capacitor for
frequency stability and is stable for any output capaci-
tance.
Temperature Performance
The LM4040 typically exhibits an output voltage tem-
perature coefficient within ±15ppm/°C. The polarity of
the temperature coefficient may be different from one
device to another; some may have positive coefficients,
and others may have negative coefficients.
Figure 3. Typical Operating Circuit
LM4040
ILOAD
ISHUNT
RS
VS
VR
ISHUNT + ILOAD
Pin Description
PIN NAME FUNCTION
1 + Positive Terminal of the Shunt Reference
2Negative Terminal of the Shunt Reference
3 N.C. No connection. Leave this pin unconnected or connected to Pin 2.
Chip Information
TRANSISTOR COUNT: 60
PROCESS: BiCMOS
LM4040
Improved Precision Micropower Shunt Voltage
Reference with Multiple Reverse Breakdown Voltages
______________________________________________________________________________________ 11
PART
OUTPUT
VOLTAGE
(V)
INITIAL
ACCURACY
(%)
TEMPCO
(ppm/°C)
TEMP.
RANGE
PIN-
PACKAGE
TOP
MARK
LM4040AIM3-2.1 2.048 0.1 100 -40°C to +85°C 3 SOT23-3 FZEF
LM4040AIX3-2.1 2.048 0.1 100 -40°C to +85°C 3 SC70-3 ABJ
LM4040BIM3-2.1 2.048 0.2 100 -40°C to +85°C 3 SOT23-3 FZEG
LM4040BIX3-2.1 2.048 0.2 100 -40°C to +85°C 3 SC70-3 ABK
LM4040CIM3-2.1 2.048 0.5 100 -40°C to +85°C 3 SOT23-3 FZEH
LM4040CIX3-2.1 2.048 0.5 100 -40°C to +85°C 3 SC70-3 ABL
LM4040DIM3-2.1 2.048 1.0 150 -40°C to +85°C 3 SOT23-3 FZEI
LM4040DIX3-2.1 2.048 1.0 150 -40°C to +85°C 3-SC70-3 ABM
LM4040AIM3-2.5 2.500 0.1 100 -40°C to +85°C 3 SOT23-3 FZEJ
LM4040AIX3-2.5 2.500 0.1 100 -40°C to +85°C 3 SC70-3 ABN
LM4040BIM3-2.5 2.500 0.2 100 -40°C to +85°C 3 SOT23-3 FZEK
LM4040BIX3-2.5 2.500 0.2 100 -40°C to +85°C 3 SC70-3 ABO
LM4040CIM3-2.5 2.500 0.5 100 -40°C to +85°C 3 SOT23-3 FZEL
LM4040CIX3-2.5 2.500 0.5 100 -40°C to +85°C 3 SC70-3 ABP
LM4040DIM3-2.5 2.500 1.0 150 -40°C to +85°C 3 SOT23-3 FZEM
LM4040DIX3-2.5 2.500 1.0 150 -40°C to +85°C 3 SC70-3 ABQ
LM4040AIM3-3.0 3.000 0.1 100 -40°C to +85°C 3 SOT23-3 FZEN
LM4040AIX3-3.0 3.000 0.1 100 -40°C to +85°C 3 SC70-3 ABR
LM4040BIM3-3.0 3.000 0.2 100 -40°C to +85°C 3 SOT23-3 FZEO
LM4040BIX3-3.0 3.000 0.2 100 -40°C to +85°C 3 SC70-3 ABS
LM4040CIM3-3.0 3.000 0.5 100 -40°C to +85°C 3 SOT23-3 FZEP
LM4040CIX3-3.0 3.000 0.5 100 -40°C to +85°C 3 SC70-3 ABT
LM4040DIM3-3.0 3.000 1.0 150 -40°C to +85°C 3 SOT23-3 FZEQ
LM4040DIX3-3.0 3.000 1.0 150 -40°C to +85°C 3 SC70-3 ABU
LM4040AIM3-4.1 4.096 0.1 100 -40°C to +85°C 3 SOT23-3 FZER
LM4040AIX3-4.1 4.096 0.1 100 -40°C to +85°C 3 SC70-3 ABV
LM4040BIM3-4.1 4.096 0.2 100 -40°C to +85°C 3 SOT23-3 FZES
LM4040BIX3-4.1 4.096 0.2 100 -40°C to +85°C 3 SC70-3 ABW
LM4040CIM3-4.1 4.096 0.5 100 -40°C to +85°C 3 SOT23-3 FZET
LM4040CIX3-4.1 4.096 0.5 100 -40°C to +85°C 3 SC70-3 ABX
LM4040DIM3-4.1 4.096 1.0 150 -40°C to +85°C 3 SOT23-3 FZEU
LM4040DIX3-4.1 4.096 1.0 150 -40°C to +85°C 3 SC70-3 ABY
LM4040AIM3-5.0 5.000 0.1 100 -40°C to +85°C 3 SOT23-3 FZEV
LM4040AIX3-5.0 5.000 0.1 100 -40°C to +85°C 3 SC70-3 ABZ
LM4040BIM3-5.0 5.000 0.2 100 -40°C to +85°C 3 SOT23-3 FZEW
LM4040BIX3-5.0 5.000 0.2 100 -40°C to +85°C 3 SC70-3 ACA
LM4040CIM3-5.0 5.000 0.5 100 -40°C to +85°C 3 SOT23-3 FZEX
LM4040CIX3-5.0 5.000 0.5 100 -40°C to +85°C 3 SC70-3 ACB
LM4040DIM3-5.0 5.000 1.0 150 -40°C to +85°C 3 SOT23-3 FZEY
LM4040DIX3-5.0 5.000 1.0 150 -40°C to +85°C 3 SC70-3 ACC
Ordering Information
LM4040
Improved Precision Micropower Shunt Voltage
Reference with Multiple Reverse Breakdown Voltages
12 ______________________________________________________________________________________
SOTPO3L.EPS
Package Information
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are
implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.
13 ____________________Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600
© 2000 Maxim Integrated Products Printed USA is a registered trademark of Maxim Integrated Products.
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are
implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.
13 ____________________Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600
© 2000 Maxim Integrated Products Printed USA is a registered trademark of Maxim Integrated Products.
Package Information (continued)
SC70, 3L.EPS
Improved Precision Micropower Shunt Voltage
Reference with Multiple Reverse Breakdown Voltages
LM4040