Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 1 of 7
Device No
DIH-033-017 Prepared date
04-08-2008 Prepared by
JAINETSAI
Technical Data Sheet
5mm Infrared LED , T-1 3/4
HIR333C-A
Features
High reliability
High radiant intensity
Peak wavelength λp=850nm
2.54mm Lead spacing
Low forward voltage
Pb free
The product itself will remain within RoHS compliant version.
Descriptions
EVERLIGHT’S Infrared Emitting Diode(HIR333C-A)
is a high intensity diode , molded in a water clear plastic
package.
The device is spectrally matched with phototransistor , photodiode
and infrared receiver module.
Applications
Free air transmission system
Optoelectronic switch
Floppy disk drive
Infrared applied system
Device Selection Guide
Chip
LED Part No. Material Lens Color
HIR333C-A GaAlAs Water clear
Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 2 of 7
Device No
DIH-033-017 Prepared date
04-08-2008 Prepared by
JAINETSAI
HIR333C-A
Package Dimensions
Notes: 1.All dimensions are in millimeters
2.Tolerances unless dimensions ±0.25mm
Absolute Maximum Ratings (Ta=25
)
Parameter Symbol Rating Units
Continuous Forward Current I
F
100 mA
Peak Forward Current *1 I
FP
1.0 A
Reverse Voltage V
R
5 V
Operating Temperature T
opr
-40~+85
Storage Temperature T
stg
-40~ +100
Soldering Temperature *2 T
sol
260
Power Dissipation at(or below)
25Free Air Temperature
P
d
150 mW
Notes: *1:I
FP
Conditions--Pulse Width100μs and Duty1%.
*2:Soldering time5 seconds.
Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 3 of 7
Device No
DIH-033-017 Prepared date
04-08-2008 Prepared by
JAINETSAI
HIR333C-A
Electro-Optical Characteristics (Ta=25
)
Parameter Symbol
Condition Min.
Typ.
Max.
Units
I
F
=20mA 7.8 15 --
I
F
=100mA
Pulse Width
100
μ
s ,Duty
1%
-- 140 --
Radiant Intensity I
E
I
F
=1A
Pulse Width
100
μ
s ,Duty
1%.
-- 980 --
mW/sr
Peak Wavelength λp I
F
=20mA -- 850 -- nm
Spectral
Bandwidth
Δλ I
F
=20mA -- 45 -- nm
I
F
=20mA 1.45
1.65
I
F
=100mA
Pulse Width
100
μ
s ,Duty
1%
-- 1.80
2.40
Forward Voltage V
F
I
F
=1A
Pulse Width
100
μ
s ,Duty
1%.
-- 4.10
5.25
V
Reverse Current I
R
V
R
=5V -- -- 10 μA
View Angle 2θ1/2 I
F
=20mA -- 17 -- deg
Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 4 of 7
Device No
DIH-033-017 Prepared date
04-08-2008 Prepared by
JAINETSAI
0
-40 -20 40200 60 10080
20
40
60
100
80
120
140
0
20
40
60
80
100 I
F
=20mA
Ta=25° C
790 810 830 850 870 890 910 930 950
0
10
1
10
102
3
104
21 3 4 5 6 7 8
75
-25
800
0
825
850
25 50
875
900
100
HIR333C-A
Typical Electro-Optical Characteristics Curves
Fig.1 Forward Current vs. Fig.2 Spectral Distributio
n
Ambient Temperature
Fig.3 Peak Emission Wavelength Fig.4 Forward Current
Ambient Temperature vs. Forward Voltage
Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 5 of 7
Device No
DIH-033-017 Prepared date
04-08-2008 Prepared by
JAINETSAI
25
1
50 75 100 120
I
F
=20mA
1.6
1.4
1.2
0.6
-20
0.9
0.7
0.8
1.0
0.20.4 0 0.2 0.4 0.6
50
70
80
60
40
30
-10 0 2010
10
0
10
1
1000
100
321
10 1010
4
10
10
25
0
50 100
75 120
20
30
HIR333C-A
Typical Electro-Optical Characteristics Curves
Fig.5 Relative Intensity vs. Fig.6 Relative Radiant Intensity vs.
Forward Current Angular Displacement
Fig.7 Relative Intensity vs. Fig.8 Forward Current vs.
Ambient Temperature(
°
C) Ambient Temperature(
°
C)
Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 6 of 7
Device No
DIH-033-017 Prepared date
04-08-2008 Prepared by
JAINETSAI
HIR333C-A
Reliability Test Item And Condition
The reliability of products shall be satisfied with items listed below.
Confidence level90%
LTPD10%
NO.
Item Test Conditions Test Hours/
Cycles
Sample
Sizes
Failure
Judgement
Criteria
Ac/Re
1 Solder Heat TEMP.260℃±5 10secs 22pcs 0/1
2 Temperature Cycle
H : +100 15mins
5mins
L : -40 15mins
50Cycles 22pcs 0/1
3 Thermal Shock H :+100 5mins
10secs
L :-10 5mins
50Cycles 22pcs 0/1
4 High Temperature
Storage
TEMP.+100 1000hrs 22pcs 0/1
5 Low Temperature
Storage
TEMP.-40 1000hrs 22pcs 0/1
6 DC Operating Life I
F
=20mA 1000hrs 22pcs 0/1
7 High Temperature/
High Humidity
85 / 85% R.H 1000hrs 22pcs
I
R
U×2
I
E
L×0.8
V
F
U×1.2
UUpper
Specification
Limit
LLower
Specification
Limit
0/1
Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 7 of 7
Device No
DIH-033-017 Prepared date
04-08-2008 Prepared by
JAINETSAI
RoHS
HIR333C-A
Packing Quantity Specification
1.500PCS/1Bag5Bags/1Box
2.10Boxes/1Carton
Label Form Specification
CPN: Customer’s Production Number
P/N : Production Number
QTY: Packing Quantity
CAT: Ranks
HUE: Peak Wavelength
REF: Reference
LOT No: Lot Number
MADE IN TAIWAN: Production Place
Notes
1. Above specification may be changed without notice. EVERLIGHT will reserve authority on
material change for above specification.
2. When using this product, please observe the absolute maximum ratings and the instructions
for using outlined in these specification sheets. EVERLIGHT assumes no responsibility for
any damage resulting from use of the product which does not comply with the absolute
maximum ratings and the instructions included in these specification sheets.
3. These specification sheets include materials protected under copyright of EVERLIGHT
corporation. Please don’t reproduce or cause anyone to reproduce them without EVERLIGHT’s
consent.
EVERLIGHT ELECTRONICS CO., LTD. Tel: 886-2-2267-2000, 2267-9936
Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Fax: 886-2267-6244, 2267-6189, 2267-6306
Tucheng, Taipei 236, Taiwan, R.O.C http://www.everlight.com
HIR333C
-
A