MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors Table of Contents Introduction This catalog has been designed to assist you, our customer, identify products to satisfy your connector needs for printed circuit board headers, mass termination connectors preloaded with contacts, crimp-snap contacts and housings, and card edge connectors with preloaded contacts. The list at right identifies by centerline the types of product available and is meant to be of assistance to you in the product selection process. IDC MTA-50 IDC MTA-100 Crimp CST-100 II IDC MTA-156 (c) 1977, 1978, 1979, 1980, 1983, 1986, 1988, 1992, 1993, 1994, 1995, 1999, 2000, 2001, 2002, 2003 and 2005 by Tyco Electronics Corporation. All International Rights Reserved. AMP, AMP-O-LECTRIC, AMP-O-MATIC, AMPOMATOR, CERTI-CRIMP, PRO-CRIMPER, MADISON CABLE and TYCO are trademarks. TEFLON is a trademark of E.I. DuPont De Nemours and Company. Other products, logos, and company names mentioned herein may be trademarks of their respective owners. Introduction and Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2, 3 Connector Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 .050 [1.27] Centerline Connectors MTA-50 IDC Connectors and Headers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-10 Introduction and Wire-to-Board Mateability Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 IDC Connector Kits (Feed-Thru and Closed End) Ribbon Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5, 6 Discrete Wire . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7, 8 Through-Hole Header Assemblies Vertical and Right-Angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 Surface Mount Header Assemblies Vertical and Right-Angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 .100 [2.54] Centerline Connectors MTA-100 IDC Connectors and Headers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11-31 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 Wire-to-Board Mateability Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12, 13 Connectors -- UL94V-2 and UL94V-0 Closed End with and without Polarizing Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14, 15 Feed-Thru with and without Polarizing Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14, 15 LED Closed End and Feed-Thru -- UL94V-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14, 15 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16, 17 Posted Connectors Mateability Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18, 19 MTA-100 Posted Connectors (Wire-to-Wire) UL94V-2 Closed End . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 Feed-Thru . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 Headers -- UL94V-0 Flat -- Straight and Right-Angle Posts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21 Narrow Flat -- Straight and Right-Angle Posts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22 Polarized -- Straight and Right-Angle Posts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23 Friction Lock -- Straight and Right-Angle Posts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24 Headers with Retention Peg -- Straight Posts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25 High Profile Headers -- Right-Angle Posts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26 Polarized -- High Temperature, Straight and Right-Angle Posts . . . . . . . . . . . . . . . . .27 Friction Lock -- High Temperature, Straight and Right-Angle Posts . . . . . . . . . . . . . .28 Polarized -- Surface Mount, Straight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29 Friction Lock -- Surface Mount, Straight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29 Shrouded -- Straight and Right-Angle Posts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30 CST-100 II Crimp Contacts, Housings and Shrouded Headers . . . . . . . . . . . . . . . . . . . . . . . . .31, 32 .156 [3.96] Centerline Connectors MTA-156 IDC Connectors and Headers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33-57 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33 Wire-to-Board Mateability Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34, 35 Connectors -- UL94V-2 and UL94V-0 Closed End with Locking Ramp, with and without Polarizing Tabs . . . . . . . . . . .36, 37 Closed End without Locking Ramp, with and without Polarizing Tabs . . . . . . . . .36, 37 Feed-Thru with Locking Ramp, with and without Polarizing Tabs . . . . . . . . . . . . .38, 39 Feed-Thru without Locking Ramp, with and without Polarizing Tabs . . . . . . . . . . .38, 39 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40-42 Posted Connectors Mateability Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43, 44 MTA-156 Posted Connectors (Wire-to-Wire) -- UL94V-2 Closed End . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45 Feed-Thru . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45 MTA-156 Headers -- UL94V-0 Flat -- Straight Posts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46 Flat -- Right-Angle Posts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47 Friction Lock -- Straight Posts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48 Friction Lock -- Right-Angle Posts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49 Polarized Lock -- Straight Posts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50 Polarized Lock -- Right-Angle Posts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51 Friction Lock -- High Temperature, Straight Posts . . . . . . . . . . . . . . . . . . . . . . . . . . . .52 Shrouded -- Straight and Right-Angle Posts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53 MTA-156 Quad Connectors -- UL94V-0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54, 55 Closed End with Locking Ramp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55 Feed-Thru with Locking Ramp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55 2 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors Table of Contents (Continued) Crimp SL-156 Crimp AMP EP Connectors Need more information? Call Technical Support at the numbers listed below. Technical Support is staffed with specialists well versed in Tyco Electronics products. They can provide you with: Technical support Catalogs Technical Documents Product Samples Authorized Distributor Locations MTA-156 Card Edge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56, 57 Connectors -- UL94V-0 Closed End with and without Mounting Ears . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56 Feed-Thru with and without Mounting Ears . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57 SL-156 Crimp Connectors and Headers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58-62 Wire-to-Board Mateability Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58 Wire-to-Board Crimp Contacts and Keying Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59 Wire-to-Board Housings -- UL94V-0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60 Housings with Through Board Latch -- UL94V-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61 Housings and Contacts for Large Insulation Diameter (LID) Wire . . . . . . . . . . . . . . . . . .62 AMP Economy Power (EP) Connector System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63-69 .156 [3.96] Centerline Connectors Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63 Crimp Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64 Plug Housings, Low-Profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64 Low-Profile Headers -- Straight and Right-Angle Posts . . . . . . . . . . . . . . . . . . . . . . . . . .65 Low-Profile Headers, High Temp. -- Straight and Right-Angle Posts . . . . . . . . . . . . . . .66 .200 [5.08] Centerline Connectors Plug Housings and Straight and Right-Angle Post Headers . . . . . . . . . . . . . . . . . . . . . .67 .312 [7.92] Centerline Connectors Low-Profile Headers -- Straight Posts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68 Single Connectors 1-Position Plug Housing and High-Profile Header -- Straight Post . . . . . . . . . . . . . . . . .69 MTA Wire Selection and Ribbon Cable Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .70 IDC Ribbon Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71-74 MTA Wire Termination Flowchart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .75 MTA Application Tooling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .76-79 Part Number Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80-82 Global Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .83 Connector Selection Guide Product Name .050" Centerline MTA-50 IDC Connector Kits and Headers .100" Centerline MTA-100 Connectors and Headers CST-100 II Contacts and Housings .156" Centerline MTA-156 Connectors and Headers Contact Wire-toCenter- TerminNo. of Wire line ation Option Positions .050 1.27 .100 2.54 .100 2.54 Quad Connectors .156 3.96 .156 3.96 SL-156 Contacts and Housings .156 3.96 SL-156 Large Ins. Dia. (LID) .156 Contacts and Housings 3.96 .156", .200" and .312" Centerlines .156 3.96 AMP Economy Power .200 (EP) Connector System 5.08 .312 7.92 Wire Wire Size Insulation (AWG) Dia. Max. IDC Planned 2-28 30-26 IDC Yes 2-28 28-22 2-28 26-22 Crimp Planned IDC Yes 2-24 26-18 IDC No 2-12 22-18 Crimp No Crimp No 2-24 24-16 Crimp No 1-12 22-18 Crimp No 2-12 22-18 Crimp No 2-5 22-18 1-24; 2-10 w/ through 24-18 board latch Current Rating (A)** .039* 0.99 .060* 1.52 .065 1.65 Voltage Operating ReplaceUL Rating Temp. ment Flammability Max. (VAC) Range (C) Contacts 1 30 -55 to +105 V-0 & V-2 No 5 250 -55 to +105 V-0 & V-2 Yes 4 250 -55 to +105 Yes V-0 .095* 2.41 .095* 2.41 7 600 -55 to +105 V-0 & V-2 Yes 12.5 600 -55 to +105 V-0 Yes .105 2.67 10 250 -25 to +105 V-0 Yes .112 2.84 10 250 -25 to +105 V-0 Yes 8 (1 pos.) 7.5 (2-12 Pos.) 250 -25 to +105 V-0 Yes 7.5 (2-12 Pos.) 250 -25 to +105 V-0 Yes 7.5 (2-5 Pos.) 250 -25 to +105 V-0 Yes .118 3.00 .118 3.00 .118 3.00 Approvals R R R R R R R R R R R R R R R R R R R R ** When terminated one position at a time. ** Current Rating is application dependent. 3 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors MTA-50 IDC Connectors and Headers Product Facts .503 [12.78] or .254 [6.45] Max. Vertical Max. Right-Angle Component Recognized by Underwriters Laboratories Inc. to US and Canadian Standards, File No. E28476 (Connectors and Headers) File No. E53793 (Ribbon Cable) These matrixes have been prepared to assist you in defining the correct mating halves for the MTA-50 header and connector kit combination. Where a "Y" is indicated the combination is a valid mating pair. Note: Tyco Electronics does NOT recommend intermating connectors and headers with different contact platings. The MTA-50 IDC Connector System is a wire-to-printed circuit board system with contacts in a staggered, single row on .050 [1.27] centerline. The design features wire feedthrough capability for daisychain applications. Insulation displacement contacts are used to terminate a wide range of conductor sizes. Ribbon cable can also be terminated when the appropriate receptacle assembly and strain relief cover are used. Header assemblies for board mount applications include right-angle (horizontal) and vertical mount products. These are available in through-hole and surface mount configurations. Typical uses of the MTA-50 IDC connectors would be in the Appliance, Commercial and Home Equipment and Security products industries. See the following pages for related products: Ribbon Cable (reels), .050 [1.27] centerline (p. 71) Application Tooling (p. 76) Cable Assemblies (p. 74) Performance Data Voltage Rating -- 30 VAC Current Rating -- 1 amp max. Low-Level Resistance -- 30 milliohms Dielectric Withstanding Voltage -- 500 VAC Insulation Resistance -- 1,000 megohms Operating Temperature -- -55C to +105C for connector only; cable rating may be lower Technical Documents Application Specification -- 114-13072 MTA-50 Connectors Product Specifications -- 108-2113 MTA-50 Connectors 100-4703 MADISON CABLE Cable Specification (28 AWG, 7/36 Tinned copper, PVC insulation) 100-6257 MADISON CABLE Cable Specification (28 AWG, 7/36 Tinned copper, TPO insulation) MTA-50 IDC Connector Kit / Header Mateability Guide Headers Headers 1445341 1445344 1445347 1445350 1445353 1445356 1445359 1445362 1445365 1445368 1445371 1445374 Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Matrix for Tin Plated Part Numbers Y Y Y Y Y Y Y Y Y Y Y Y Headers 1445343 1445346 1445349 1445352 1445355 1445358 1445361 1445364 1445367 1445370 1445373 1445376 Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Matrix for .000030 [0.00076] Gold Plated Part Numbers 1445 123 1445 124 1445 170 1445 173 Connector Kits 1445 125 1445 126 1445 171 1445 174 Connector Kits 2-28 contact positions Connectors terminate 26, 28 and 30 AWG discrete wire or .050 [1.27] centerline ribbon cable Color-coded housings Maximum cable insulation diameter of .039 [0.99] with PVC insulation only IDC contacts pre-loaded in receptacle housing 30 V, 1 A contact rating Contact design allows for gold-to-gold or tin-to-tin interface Contacts are lubricated to prevent fretting corrosion Wire feed-thru capability for daisy-chain wiring or closed end for point-to-point wiring Connectors are polarized for proper mating Manual and semiautomatic application tooling Mating heights shown below: 1445 120 1445 121 1445 169 1445 172 Connector Kits MTA-50 .050 [1.27] 1445342 1445345 1445348 1445351 1445354 1445357 1445360 1445363 1445366 1445369 1445372 1445375 Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Matrix for .000015 [0.00038] Gold Plated Part Numbers 4 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors MTA-50 IDC Connectors and Headers (Continued) Feed-Thru and Closed End Connectors Receptacle Assemblies -- Ribbon Cable MTA-50 .050 [1.27] .004 A [ 0.10] (See Note 1) .315 .006 [8.00 0.15] .150 [3.81] Material and Finish Housing -- UL 94V-2 rated, thermoplastic Contacts -- Phosphor bronze; .000100 [0.00254] min. tin in wire termination area, over .000050 [0.00127] min. nickel; choice on mating end: .000100 [0.00254] min. tin or .000030 [0.00076] gold or .000015 [0.00038] gold, over .000050 [0.00127] min. nickel Position 1 .050 Ref. [1.27] .035 Ref. [0.89] .190 .003 [4.83 0.08] .100 .003 [2.54 0.08] Notes: 1. To determine connector overall length (dim. A), multiply .050 x the number of circuits and add .082. Example: .050 x 10 circuits equals 0.50 + .082 = .582 [14.78]. Color Coding by Wire Size for UL94V-0 Connectors 2. Strain relief covers shown on page 6 are required and sold as part of the Connector Kit. 26 AWG -- Blue 28 AWG -- Green 30 AWG -- Brown 3. Stranded UL Style 1061 or equivalent wire is recommended. For Strain Relief Covers see page 6. For mating Headers see pages 9 and 10. For Mateability Guide, see matrixes on page 4. 4. Unless otherwise stated all tolerances (except plating) to be .005 [0.13]. 5. Consult Product Drawing for RoHS Compliant information. Connector Kits -- Ribbon Cable Base Part Numbers Connector Kit Ordering Information Connector Kit consists of Receptacle Assembly and Strain Relief Cover. Base part number prefixes and suffixes indicate the number of circuit positions, for example: Base part number 1445359 2 position = 0-1445359-2 and 28 position = 2-1445359-8 Note: Tin-plated connectors and headers in even position sizes from 2-12 and 18 are stocked parts; all other position sizes and products with gold-plated contacts are Make To Order. Connector Type & Wire Size Feed-Thru Connector Kit No. of Part Nos. Circuits Tin Plated 26 AWG 1445359 0.12-0.15 mm2 28 AWG 1445362 0.08-0.09 mm2 30 AWG 1445365 0.05-0.06 mm2 .000030 [0.00076] Gold Plated 26 AWG 1445361 0.12-0.15 mm2 28 AWG 1445364 0.08-0.09 mm2 30 AWG 1445367 0.05-0.06 mm2 .000015 [0.00038] Gold Plated 26 AWG 1445360 0.12-0.15 mm2 28 AWG 1445363 0.08-0.09 mm2 30 AWG 1445366 0.05-0.06 mm2 Closed End Connector Kit No. of Part Nos. Circuits 2-28 1445368 2-28 2-28 1445371 2-28 2-28 1445374 2-28 2-28 1445370 2-28 2-28 1445373 2-28 2-28 1445376 2-28 2-28 1445369 2-28 2-28 1445372 2-28 2-28 1445375 2-28 5 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors MTA-50 IDC Connectors and Headers (Continued) MTA-50 .050 [1.27] Connector Kits -- Ribbon Cable (Continued) .068 2 Plcs. [1.73] Strain Relief Covers Material and Finish .040 2 Plcs. [1.02] Strain Relief Cover -- UL 94V-0 rated, thermoplastic, black .090 4 Plcs. [2.29] Feed-Thru A .237 .008 [6.02 0.20] .123 .006 [3.12 0.15] Feed-Thru Closed End .255 [6.48] A .237 .008 [6.02 0.20] Closed End Feed-Thru and Closed End No. of Circuits 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Dim. A .260 6.60 .310 7.87 .360 9.14 .410 10.41 .460 11.68 .510 12.95 .560 14.22 .610 15.49 .660 16.76 .710 18.03 .760 19.30 .810 20.57 .860 21.84 .910 23.11 No. of Circuits 16 17 18 19 20 21 22 23 24 25 26 27 28 Dim. A .960 24.38 1.010 25.65 1.060 26.92 1.110 28.19 1.160 29.46 1.210 30.73 1.260 32.00 1.310 33.27 1.360 34.54 1.410 35.81 1.460 37.08 1.510 38.35 1.560 39.62 6 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors MTA-50 IDC Connectors and Headers (Continued) Feed-Thru and Closed End Connectors Receptacle Assemblies -- Discrete Wire .004 [ 0.10] (See Note 1) MTA-50 .050 [1.27] A .315 .006 [8.00 0.15] .150 [3.81] Material and Finish Housing -- UL 94V-2 rated, thermoplastic Contacts -- Phosphor bronze; .000100 [0.00254] min. tin in wire termination area, over .000050 [0.00127] min. nickel; choice on mating end: .000100 [0.00254] min. tin or .000030 [0.00076] gold or .000015 [0.00038] gold, over .000050 [0.00127] min. nickel Position 1 .050 Ref. [1.27] .035 Ref. [0.89] .190 .003 [4.83 0.08] .100 .003 [2.54 0.08] Notes: 1. To determine connector overall length (dim. A), multiply .050 x the number of circuits and add .082. Example: .050 x 10 circuits equals 0.50 + .082 = .582 [14.78]. Color Coding by Wire Size for UL94V-0 Connectors 2. Strain relief covers shown on page 8 are required and sold as part of the Connector Kit. 26 AWG -- Blue 28 AWG -- Green 30 AWG -- Brown 3. Stranded UL Style 1061 or equivalent wire is recommended. 4. Unless otherwise stated all tolerances (except plating) to be .005 [0.13]. For Strain Relief Covers see page 8. For mating Headers see pages 9 and 10. For Mateability Guide, see matrixes on page 4. 5. Consult Product Drawing for RoHS Compliant information. Connector Kits -- Discrete Wire Base Part Numbers Connector Kit Ordering Information Connector Kit consists of Receptacle Assembly and Strain Relief Cover. Base part number prefixes and suffixes indicate the number of circuit positions, for example: Base part number 1445341 2 position = 0-1445341-2 and 28 position = 2-1445341-8 Note: Tin-plated connectors and headers in even position sizes from 2-12 and 18 are stocked parts; all other position sizes and products with gold-plated contacts are Make To Order. Connector Type & Wire Size Feed-Thru Connector Kit No. of Part Nos. Circuits Tin Plated 26 AWG 1445341 0.12-0.15 mm2 28 AWG 1445344 0.08-0.09 mm2 30 AWG 1445347 0.05-0.06 mm2 .000030 [0.00076] Gold Plated 26 AWG 1445343 0.12-0.15 mm2 28 AWG 1445346 0.08-0.09 mm2 30 AWG 1445349 0.05-0.06 mm2 .000015 [0.00038] Gold Plated 26 AWG 1445342 0.12-0.15 mm2 28 AWG 1445345 0.08-0.09 mm2 30 AWG 1445348 0.05-0.06 mm2 Closed End Connector Kit No. of Part Nos. Circuits 2-28 1445350 2-28 2-28 1445353 2-28 2-28 1445356 2-28 2-28 1445352 2-28 2-28 1445355 2-28 2-28 1445358 2-28 2-28 1445351 2-28 2-28 1445354 2-28 2-28 1445357 2-28 7 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors MTA-50 IDC Connectors and Headers (Continued) MTA-50 .050 [1.27] Connector Kits -- Discrete Wire (Continued) .068 2 Plcs. [1.73] Strain Relief Covers Material and Finish .040 2 Plcs. [1.02] Strain Relief Cover -- UL 94V-0 rated, thermoplastic, black .090 4 Plcs. [2.29] Feed-Thru A .237 .008 [6.02 0.20] .123 .006 [3.12 0.15] Feed-Thru Closed End .255 [6.48] A .237 .008 [6.02 0.20] Closed End Feed-Thru and Closed End No. of Circuits 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Dim. A .260 6.60 .310 7.87 .360 9.14 .410 10.41 .460 11.68 .510 12.95 .560 14.22 .610 15.49 .660 16.76 .710 18.03 .760 19.30 .810 20.57 .860 21.84 .910 23.11 No. of Circuits 16 17 18 19 20 21 22 23 24 25 26 27 28 Dim. A .960 24.38 1.010 25.65 1.060 26.92 1.110 28.19 1.160 29.46 1.210 30.73 1.260 32.00 1.310 33.27 1.360 34.54 1.410 35.81 1.460 37.08 1.510 38.35 1.560 39.62 8 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors MTA-50 IDC Connectors and Headers (Continued) Through-Hole Header Assemblies Vertical Circuit #1 MTA-50 .050 [1.27] Note: To determine header overall length (dim. A), multiply .050 x the number of circuits and add .150. Example: .050 x 6 circuits equals .300 + .150 = .450 [11.43]. .035 [0.89] Ref. .170 [4.32] A .220 .003 [5.59 0.08] .060 [1.52] .125 [3.18] Ref. Material and Finish Housing -- UL 94V-0 rated, thermoplastic, black Contacts -- Brass, .000100 [0.00254] min. tin over .000050 [0.00127] min. nickel on solder legs; choice on mating end: .000100 [0.00254] min. tin or .000030 [0.00076] gold or .000015 [0.00038] gold, over .000050 [0.00127] min. nickel .035 Ref. [0.89] .016 Ref. [0.41] .050 Ref. [1.27] Base Part Numbers .068 [1.73] .100 Typ. [2.54] .060 .003 Dia. [1.52 0.08] .050 Typ. [1.27] .035 [0.89] Circuit #1 .0705 [1.90] .031 .002 Dia. Typ. [0.78 0.05] .250* [6.35] Recommended Mounting Hole Size and Pattern for .062 [1.57] Thick PC Board Through-Hole Header No. of Part Nos. Posts Standard UL 94V-0, Tin Plated 1445120 2-28 Standard UL 94V-0 .000030 [0.00076] Gold Plated 1445125 2-28 Standard UL 94V-0 .000015 [0.00038] Gold Plated 1445123 2-28 * 6-circuit Dim. shown, refer to Product Drawing for actual PCB Dimensions and RoHS Compliant information. Right-Angle .220 .003 [5.59 0.08] A Circuit #1 For mating Connector Kits see pages 5 through 8. .035 [0.89] Ref. .180 [4.57] For mateability options, see matrixes on page 4. .125 Ref. [3.18] Header Ordering Information Base part number prefixes and suffixes indicate the number of circuit positions, for example: Base part number 1445120 .035 [0.89] .100 [2.54] .031 .002 Dia. Typ. [0.78 0.05] Circuit #1 2 position = 0-1445120-2 and 28 position = 2-1445120-8 Note: Tin-plated connectors and headers in even position sizes from 2-12 and 18 are stocked parts; all other position sizes and products with gold-plated contacts are Make To Order. .016 [0.41] Ref. .050 Ref. [1.27] .210 [5.33] .250* [6.35] .050 Typ. [1.27] Recommended Mounting Hole Size and Pattern for .062 [1.57] Thick PC Board * 6-circuit Dim. shown, refer to Product Drawing for actual PCB Dimensions and RoHS Compliant information. .035 Ref. [0.89] Base Part Numbers Through-Hole Header No. of Part Nos. Posts Standard UL 94V-0, Tin Plated 1445169 2-28 Standard UL 94V-0 .000030 [0.00076] Gold Plated 1445171 2-28 Standard UL 94V-0 .000015 [0.00038] Gold Plated 1445170 2-28 9 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors MTA-50 IDC Connectors and Headers (Continued) MTA-50 .050 [1.27] Surface Mount Header Assemblies Note: To determine header overall length (dim. A), multiply .050 x the number of circuits and add .150. Example: .050 x 6 circuits equals .300 + .150 = .450 [11.43]. .035 Ref. [0.89] Vertical Circuit #1 .170 [4.32] A .220 .003 [5.59 0.08] .249 Ref. [6.32] .028 .001 Typ. [0.71 0.03] .100 Typ. [2.54] .050 Typ. [1.27] .100 .162 [2.54] [4.11] Material and Finish Housing -- UL 94V-0 rated, thermoplastic, black Contacts -- Brass, .000100 [0.00254] min. tin over .000050 [0.00127] min. nickel on solder pads; choice on mating end: .000100 [0.00254] min. tin or .000030 [0.00076] gold or .000015 [0.00038] gold, over .000050 [0.00127] min. nickel Boardlock -- Phosphor bronze, tin plated .000100 [0.000254] min. over .000050 [0.00127] min. nickel .065 .001 Typ. [1.65 0.03] .070 .003 2 Plcs. [1.78 0.08] .145 .003 [3.68 0.08] 2 Plcs. .100 [2.54] Circuit #1 .574* [14.58] Recommended PC Board Layout for use with .010 [0.25] Thick Stencil * 6-circuit Dim. shown, refer to Product Drawing for actual PCB Dimensions and RoHS Compliant information. Right-Angle Base Part Numbers Surface Mount Header No. of Part Nos. Posts Standard UL 94V-0, Tin Plated 1445121 2-28 Standard UL 94V-0 .000030 [0.00076] Gold Plated 1445126 2-28 Standard UL 94V-0 .000015 [0.00038] Gold Plated 1445124 2-28 Note: All SMT product is prepackaged in standard tape and reel format. A .050 Ref. [1.27] .035 Ref. [0.89] For mating Connector Kits see pages 5 through 8. .220 .003 [5.59 0.08] Circuit #1 .180 [4.57] For mateability options, see matrixes on page 4. Header Ordering Information Base part number prefixes and suffixes indicate the number of circuit positions, for example: Base part number 1445121 2 position = 0-1445121-2 and 28 position = 2-1445121-8 Note: Tin-plated connectors and headers in even position sizes from 2-12 and 18 are stocked parts; all other position sizes and products with gold-plated contacts are Make To Order. .162 [4.11] .128 [3.25] .100 [2.54] .028 .001 Typ. [0.71 0.03] .050 Typ. [1.27] Base Part Numbers Circuit #1 .075 .001 [1.91 0.03] .145 .003 [3.68 0.08] 2 Plcs. .574* [14.58] .270 Ref. [6.86] .070 .003 [1.78 0.08] 2 Plcs. Recommended PC Board Layout for use with .010 [0.25] Thick Stencil * 6-circuit Dim. shown, refer to Product Drawing for actual PCB Dimensions and RoHS Compliant information. Surface Mount Header No. of Part Nos. Posts Standard UL 94V-0, Tin Plated 1445172 2-28 Standard UL 94V-0 .000030 [0.00076] Gold Plated 1445174 2-28 Standard UL 94V-0 .000015 [0.00038] Gold Plated 1445173 2-28 10 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors .100 [2.54] Centerline MTA-100 IDC Connectors and Headers Product Facts R R Technical Documents Product Specification 108-1050 MTA-100 Connectors Application Specifications 114-1019 MTA-100 Connectors 114-1031 MTA-100 Ribbon Cable Assembly MTA-100 .100 [2.54] Connectors and headers for 2 through 28 positions; wire sizes of 22, 24, 26 and 28 AWG [0.4-0.08 mm2] Wire-to-Post Connectors preloaded with dual beam contacts Connectors and headers, except shrouded headers, are end-to-end stackable Connector styles include both closed end and feedthru connectors with locking ramps, with and without polarizing tabs Molded ribs on housing do not allow reverse mating Posted connectors for 2 through 19 positions Connectors preloaded with IDC contacts All contacts are slotted for insulation displacement (IDC) terminal technique Contacts are lubricated for fretting corrosion protection Benefits derived from the MTA-100 system include increased quality and ease of handling such as -- One-step assembly No wire stripping No contact damage Reduced wiring errors Simpler tooling Simple maintenance and repair Meets the material requirements of Table 23.1 of UL1410 Standards for Television Receiver and Video Products (wire-topost connectors only) Recognized under the Component Program of Underwriters Laboratories Inc., File No. E28476 Certified by Canadian Standards Association, File No. LR7189 MTA-100 connectors accept discrete and ribbon cable wire sizes ranging from 22 - 28 AWG [0.4 - 0.08 mm2] with maximum insulation outside diameter of .060 [1.52] for terminating single wire and .050 [1.27] for mass termination of wires. Tin plated solid, fused stranded, or stranded (7 strands) wire with PVC insulation can be used on 22 - 28 AWG [0.4 - 0.9 mm2] MTA-100 connectors and 19 stranded wire on 22-24 AWG [0.4- 0.2 mm2] MTA-100 connectors. Only one wire to be terminated into an IDC contact slot. The wire-to-post connector housing material is flame retardant thermoplastic, either UL94V-2 or UL94V-0 rated. A full line of .100 [2.54] centerline headers completes the system. Headers are available with straight or right-angle posts, in flat, polarized or friction lock styles. Headers are available in 2 through 28 positions. Shrouded headers are available in 2 through 14 positions. Performance Data* Voltage Rating -- 250 vac Current Rating -- 5 amp max. Low-Level Resistance -- 6 m max. initial Dielectric Withstanding Voltage -- 750 vac/1 min. Insulation Resistance -- 5000 M min. initial Operating Temperature -- 55 C to 105 C Note: Refer to page 70 for approved wire listings. *Refer to the Product Specification for additional electrical, mechanical and environmental performance tests and requirements. 11 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors MTA-100 Connector/Header Mateability Guide This matrix has been prepared to assist you, our customer, in defining the correct mating halves for the MTA-100 header and connector combination. Where a "Y" is indicated the combination is a valid mating pair. Where an "N" is indicated the combination is not acceptable for mating. Headers Connectors 6404 52 6404 53 6404 54 6404 55 6404 56 6404 57 6444 56 6444 57 6444 86 6444 88 6446 94 6446 95 6448 03 6448 61 6448 74 6448 75 6448 76 6448 77 6448 92 6448 93 6448 94 6470 47 6470 48 6470 50 6470 51 6471 06 6471 66 6475 02 6475 31 6476 09 6476 23 6475 32 1744 075 MTA-100 .100 [2.54] Matrix for Tin Plated Part Numbers 640440 640441 640442 640443 640468 640469 640470 640471 640620 640621 640622 640623 641311 641312 641313 641314 641534 641535 641536 641537 641653 641654 641655 641656 643498 643813 643814 643815 643816 643828 644083 644312 644313 644497 644511 644512 644513 644514 644540 644563 644564 644565 644574 644575 644576 644577 644578 644579 644795 *1375820 Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y N Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y N Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y N Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y N Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N Y N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N Y N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y *Select contact plating to match header plating. 12 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors MTA-100 Connector/Header Mateability Guide (Continued) This matrix has been prepared to assist you, our customer, in defining the correct mating halves for the MTA-100 header and connector combination. Where a "Y" is indicated the combination is a valid mating pair. Where an "N" is indicated the combination is not acceptable for mating. Matrix for .000030 [0.00076] Gold Plated Part Numbers Headers Connectors 6412 11 6412 12 6412 13 6412 14 6412 15 6412 16 6444 87 6444 89 6448 84 6448 85 6448 86 6448 87 6448 96 6448 97 6448 98 6471 08 6471 09 6471 14 6471 16 6471 17 6471 68 6476 26 6476 24 6475 34 1744 047 1744 163 MTA-100 .100 [2.54] 641237 641238 641239 641240 641241 641242 641243 641244 644020 644042 644043 644044 644702 644726 *1375820 Matrix for .000015 [0.00038] Gold Plated Part Numbers Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y N Y Y Y Y Y Y Y Y Y Y Y Y Y Y N Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y N N N N N N N N N N N N N N Y N N N N N N N N N N N N N N Y N N N N N N N N N N N N N N Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Connectors 6411 22 6411 23 6411 24 6411 25 6411 26 6411 27 6448 88 6448 89 6448 90 6448 91 6470 75 6470 76 6470 78 6470 79 6471 07 6471 67 6474 67 6476 25 6476 27 6475 33 1744 074 Headers 641190 641191 641192 641193 641198 641199 641200 641201 644038 644040 647477 647480 *1375820 1744020 Y Y Y Y Y Y Y Y Y Y Y Y N Y Y Y Y Y Y Y Y Y Y Y Y Y N Y Y Y Y Y Y Y Y Y Y Y Y Y N Y Y Y Y Y Y Y Y Y Y Y Y Y N Y Y Y Y Y Y Y Y Y Y Y Y Y N Y Y Y Y Y Y Y Y Y Y Y Y Y N Y Y Y Y Y Y Y Y Y Y Y Y Y N Y Y Y Y Y Y Y Y Y Y Y Y Y N Y Y Y Y Y Y Y Y Y Y Y Y Y N Y Y Y Y Y Y Y Y Y Y Y Y Y N Y Y Y Y Y Y Y Y Y Y Y Y Y N Y Y Y Y Y Y Y Y Y Y Y Y Y N Y Y Y Y Y Y Y Y Y Y Y Y Y N Y Y Y Y Y Y Y Y Y Y Y Y Y N Y Y Y Y Y Y Y Y Y Y Y Y Y N Y Y Y Y Y Y Y Y Y Y Y Y Y N Y Y Y Y Y Y Y Y Y Y Y Y Y N Y Y Y Y Y Y Y Y Y Y Y Y Y N Y Y Y Y Y Y Y Y Y Y Y Y Y N Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y *Select contact plating to match header plating. 13 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors MTA-100 IDC Connectors--Closed End and Feed-Thru Material and Finish Closed End Connectors MTA-100 .100 [2.54] Housing -- UL94V-2 rated, nylon, see below for color; or UL94V-0 rated, nylon, black Contacts -- Phosphor bronze, post tin plated, .000030 [0.00076] or .000015 [0.00038] post gold-plated over nickel .275 [6.99] .275 [6.99] Color Coding by Wire Size for UL94V-2 Connectors 28 AWG -- Green 26 AWG -- Blue 24 AWG -- White 22 AWG -- Red A .056 [1.42] .075 [1.91] .245 [6.22] .184 [4.67] .100 Typ. [2.54] .520 [13.21] Without Polarizing Tabs All wire sizes in UL94V-0 -- Black .075 [1.91] For mateability options, see matrix on pages 12 and 13. .228 [5.80] For mating half visuals, see pages 20 thru 30. With Polarizing Tabs Notes: 1. Refer to pages 70-74 for approved wire listing. 2. For strain reliefs and dust covers, see page 16. 3. For keying plugs, see page 17. 4. Other circuit sizes are available upon request. Minimums may apply. 5. Connector circuits can be molded closed for keying purposes. Minimums may apply. 6. Where no part numbers appear in the chart, parts can be made available upon request. Minimums may apply. 7. To determine connector overall length (dim. A), multiply .100 x the number of circuits. Example: .100 x 10 circuits equals 1.000 inch [25.4 mm]. Feed-Thru Connectors .275 [6.99] A .075 [1.91] .305 [7.75] .056 [1.42] .245 [6.22] .184 [4.67] .100 Typ. [2.54] .520 [13.21] Without Polarizing Tabs .075 [1.91] .228 [5.80] With Polarizing Tabs 14 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors MTA-100 IDC Connectors--Closed End and Feed-Thru (Continued) Connector Ordering Information Base Part Numbers Closed End No. of Pos. 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 Lead Free RoHS Prefix/Suffix 3-640440-2 3-640440-3 3-640440-4 3-640440-5 3-640440-6 3-640440-7 3-640440-8 3-640440-9 4-640440-0 4-640440-1 4-640440-2 4-640440-3 4-640440-4 4-640440-5 4-640440-6 4-640440-7 4-640440-8 4-640440-9 5-640440-0 5-640440-1 5-640440-2 5-640440-3 5-640440-4 5-640440-5 5-640440-6 5-640440-7 5-640440-8 Without Tabs Connector Type & Wire Size Connector Part Nos. Standard UL94V-2, Tin Plated 22 AWG 640440 0.3-0.4 mm2 24 AWG 640441 0.2 mm2 26 AWG 640442 0.12-0.15 mm2 28 AWG 640443 0.08-0.09 mm2 Feed-Thru With Tabs With Tabs RoHS Equiv. Connector Part Nos. RoHS Equiv. Connector Part Nos. RoHS Equiv. Connector Part Nos. RoHS Equiv. 32-58 643813 32-58 640620 32-58 6445401 32-45 32-58 643814 32-58 640621 32-58 6445631 32-54 32-58 643815 32-58 640622 32-58 6445641 32-45 32-58 643816 32-58 640623 32-58 6445651 32-45 644511 42-68 641311 32-58 -- -- 644512 32-58 641312 32-58 -- -- 644513 32-58 641313 32-58 -- -- 644514 32-58 641314 32-58 -- -- 644042 32-58 641241 32-58 6447021 32-45 644020 32-58 641242 32-58 -- -- 1 644043 32-44 641243 32-58 644726 6440441 32-44 641244 32-58 -- -- 32-44 641198 32-58 647477 32-46 32-44 641199 32-58 -- -- 32-44 641200 32-58 647480 32-43 -- 641201 32-58 -- -- Tape Mounted on Reel UL94V-2, Tin Plated 22 AWG 640468 32-58 0.3-0.4 mm2 24 AWG 640469 32-58 0.2 mm2 26 AWG 640470 32-58 0.12-0.15 mm2 28 AWG 640471 32-58 0.08-0.09 mm2 Standard UL94V-2, .000030 [0.00076] Gold Plated 22 AWG 641237 32-58 0.3-0.4 mm2 24 AWG 641238 32-58 0.2 mm2 26 AWG 641239 32-58 0.12-0.15 mm2 28 AWG 641240 32-58 0.8-0.9 mm2 Standard UL94V-2, .000015 [0.00038] Gold Plated 22 AWG 641190 32-58 6440381 0.3-0.4 mm2 24 AWG 641191 32-58 17440201 0.2 mm2 26 AWG 641192 32-58 6440401 0.12-0.15 mm2 28 AWG 641193 32-58 -- 0.08-0.09 mm2 LED*, UL94V-2, Tin Plated (See Note 1) 22 AWG 641534 0.3-0.4 mm2 24 AWG 641535 0.2 mm2 26 AWG 641536 0.12-0.15 mm2 28 AWG 641537 0.08-0.09 mm2 Without Tabs 1 32-45 32-33 -- -- 641653 32-33 -- -- 32-33 644795 32-33 641654 32-33 -- -- 32-33 -- -- 641655 32-33 -- -- 32-33 -- -- 641656 32-33 -- -- 32-45 6445781 32-45 32-45 6445791 32-45 32-45 6444971 32-45 Standard UL94V-0, Tin Plated (Gold is available, minimums may apply.) (Black in color) 22 AWG 32-45 6440831 32-45 6445751 6434981 0.3-0.4 mm2 24 AWG 6445741 32-45 6443121 32-45 6445761 0.2 mm2 26 AWG 6438281 32-45 6443131 32-45 6445771 0.12-0.15 mm2 MTA-100 .100 [2.54] The "Base Part Numbers" Chart at right shows the base part number, and their RoHS (Restrictions on Certain Hazardous Substances) Compliant (lead free) equivalent available for the described connectors. Prefixes and suffixes are determined by the number of circuit positions in the connector. For example, the complete part number for a 10-position closed end connector without polarizing tabs for 22 AWG wire would be: Base number 640440 plus prefix-and-suffix 4- -- -0 The correct ordering number is 4-640440-0 All part numbers are the RoHS equivalent version. Example: *LED connectors are designed to mate with .014-.020 [0.36-0.51] diameter posts or square leads. 1 Other circuit sizes are available upon request. Minimums may apply. 2 Tape mounted. Note: Blocked circuit configurations are available. Contact product engineer or product manager for details. Minimums may apply. Note: All RoHS equivalent part numbers may not be available upon catalog release. If the number you need is not available, please contact Product Engineering to expedite your request. 15 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors MTA-100 IDC Connector Accessories Covers Closed End Strain Relief Covers Strain Relief Cover -- UL94V-2 rated, nylon, white Dust Covers -- UL94V-0 rated, polyester, white MTA-100 .100 [2.54] .345 [8.76] .127 [3.23] Material (RoHS Compliant) Closed End Dust Covers .335 [8.51] Retention Dimple .340 [8.64] A .360 [9.14] .105 [2.67] .130 [3.3] A Note: This portion of the front locking bar may or may not be present. Feed-Thru Strain Relief Covers .127 [3.23] Feed-Thru Dust Covers .360 [9.14] Retention Dimple .245 [6.22] A Cover Ordering Information .395 [10.03] The "Base Part Numbers" Chart at right shows the base part number and number of circuits available for the described cover. Prefixes and suffixes are determined by the number of circuit positions in the cover. For example, the complete part number for a 10-position closed end strain relief cover would be: Base number 643075 plus prefix-and-suffix 1- -- -0 The correct ordering number is .130 [3.3] A Note: This portion of the front locking bar may or may not be present. Base Part Numbers Closed End Strain Relief Dust Covers Covers Cover No. of Cover No. of Part Nos. Circuits Part Nos. Circuits 643075 2-28 640550 2-28 Feed-Thru Strain Relief Dust Covers Covers Cover No. of Cover No. of Part Nos. Circuits Part Nos. Circuits 643077 2-28 640642 3-28 1-643075-0 Cover Length No. of Circuits 2 3 4 5 6 7 8 Dim. A .200 5.08 .300 7.62 .400 10.16 .500 12.7 .600 15.24 .700 17.78 .800 20.32 Prefix/ Suffix No. of Circuits -2 9 -3 10 -4 11 -5 12 -6 13 -7 14 -8 15 Dim. A .900 22.86 1.00 25.4 1.100 27.94 1.200 30.48 1.300 33.02 1.400 35.56 1.500 38.1 Prefix/ Suffix No. of Circuits -9 16 1- -0 17 1- -1 18 1- -2 19 1- -3 20 1- -4 21 1- -5 22 Dim. A 1.600 40.64 1.700 43.18 1.800 45.72 1.900 48.26 2.000 50.8 2.100 53.34 2.200 55.88 Prefix/ Suffix No. of Circuits 1- -6 23 1- -7 24 1- -8 25 1- -9 26 2- -0 27 2- -1 28 Dim. A 2.300 58.42 2.400 60.96 2.500 63.5 2.600 66.04 2.700 68.58 2.800 71.12 Prefix/ Suffix 2- -3 2- -4 2- -5 2- -6 2- -7 2- -8 2- -2 16 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors MTA-100 IDC Connector Accessories (Continued) Keying Plug with Carrier Strip (10 plugs per strip) Part No. 641994-1 .027 Sq. [0.69] .038 [0.97] .300 [7.62] Material (RoHS Compliant) MTA-100 .100 [2.54] UL94V-2 rated, nylon, natural color .065 [1.65] .077 [1.96] Note: Removal of contact is not necessary when using keying plug. .125 [3.18] .500 Ref. [12.7] 1.800 Ref. [45.72] Replacement IDC Contacts AWG mm 22 24 26 28 0.3-0.4 0.2 0.12-0.15 0.08-0.09 Material and Finish Phosphor bronze, post tin plated; .000030 [0.00076] or .000015 [0.00038] post gold plated over nickel Standard Tin Plated 640636-3 640637-3 640638-3 640639-2 2 Note: Tyco Electronics does not recommend terminating an MTA contact more than one time. Use replacement contacts when required for field repairs or wire changes. LED Tin Plated 641643-2 641644-2 641645-2 641646-2 2 .452 [11.48] .142 [3.61] Max. Crimp Snap-In Contacts Material and Finish Part Numbers .000030 [0.00076] .000015 [0.00038] Gold Plated Gold Plated 641186-4 641186-3 641187-4 641187-3 641188-4 641188-3 641189-4 641189-3 Wire Size .070 [1.78] Wire Size AWG mm2 26-22 0.12-0.4 .075 [1.91] Part Nos. Loose Piece* Strip** 640709-2 640708-2 **Hand Tool No. 59836-1 (IS 408-6527) **Applicator No. 466747-1 (IS 408-8040) Phosphor bronze, tin plated .425 [10.8] .070 [1.78] Special applications for crimp snap-in contacts are: 1. Double wire per contact 2. Coax or shielded wire 3. Mixed wire size in same connector Note: Only one crimp snap-in contact per connector. 17 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors MTA-100 Posted Connector/Connector Mateability Guide This matrix has been prepared to assist you, our customer, in defining the correct mating halves for the MTA-100 posted connector and connector combination. Where a "Y" is indicated the combination is a valid mating pair. Where an "N" is indicated the combination is not acceptable for mating. Posted Connectors Connectors 6470 00 6470 01 6470 02 6470 03 6470 04 6470 05 6470 06 6470 07 MTA-100 .100 [2.54] Matrix for Tin Plated Part Numbers 640440 640441 640442 640443 640468 640469 640470 640471 640620 640621 640622 640623 641311 641312 641313 641314 641534 641535 641536 641537 641653 641654 641655 641656 643498 643813 643814 643815 643816 643828 644083 644312 644313 644497 644511 644512 644513 644514 644540 644563 644564 644565 644574 644575 644576 644577 644578 644579 644795 1375820 Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y* Y* Y* Y* Y Y* Y* Y* Y* Y* Y* Y* Y* Y* Y* Y* Y* Y Y Y Y Y* Y* Y* N Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y* Y* Y* Y* Y Y* Y* Y* Y* Y* Y* Y* Y* Y* Y* Y* Y* Y Y Y Y Y* Y* Y* N Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y* Y* Y* Y* Y Y* Y* Y* Y* Y* Y* Y* Y* Y* Y* Y* Y* Y Y Y Y Y* Y* Y* N Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y* Y* Y* Y* Y Y* Y* Y* Y* Y* Y* Y* Y* Y* Y* Y* Y* Y Y Y Y Y* Y* Y* N Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y* Y* Y* Y* Y Y* Y* Y* Y* Y* Y* Y* Y* Y* Y* Y* Y* Y Y Y Y Y* Y* Y* N Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y* Y* Y* Y* Y Y* Y* Y* Y* Y* Y* Y* Y* Y* Y* Y* Y* Y Y Y Y Y* Y* Y* N Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y* Y* Y* Y* Y Y* Y* Y* Y* Y* Y* Y* Y* Y* Y* Y* Y* Y Y Y Y Y* Y* Y* N Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y* Y* Y* Y* Y Y* Y* Y* Y* Y* Y* Y* Y* Y* Y* Y* Y* Y Y Y Y Y* Y* Y* N *2 & 3 position MTA-100 Posted Connectors can not mate with MTA-100 connectors with polarizing tabs. 18 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors MTA-100 Posted Connector/Connector Mateability Guide (Continued) This matrix has been prepared to assist you, our customer, in defining the correct mating halves for the MTA-100 posted connector and connector combination. Where a "Y" is indicated the combination is a valid mating pair. Where an "N" is indicated the combination is not acceptable for mating. Matrix for .000030 [0.00076] Gold Plated Part Numbers Posted Connectors Connectors 6470 08 6470 09 6470 10 6470 11 6470 12 6470 13 6470 14 6470 15 MTA-100 .100 [2.54] 641237 641238 641239 641240 641241 641242 641243 641244 644020 644042 644043 644044 644702 644726 1375820 Y Y Y Y Y Y Y Y Y* Y* Y* Y* Y* Y* N Y Y Y Y Y Y Y Y Y* Y* Y* Y* Y* Y* N Y Y Y Y Y Y Y Y Y* Y* Y* Y* Y* Y* N Y Y Y Y Y Y Y Y Y* Y* Y* Y* Y* Y* N Y Y Y Y Y Y Y Y Y* Y* Y* Y* Y* Y* N Y Y Y Y Y Y Y Y Y* Y* Y* Y* Y* Y* N Y Y Y Y Y Y Y Y Y* Y* Y* Y* Y* Y* N Y Y Y Y Y Y Y Y Y* Y* Y* Y* Y* Y* N *2 & 3 position MTA-100 Posted Connectors can not mate with MTA-100 connectors with polarizing tabs. Matrix for .000015 [0.00038] Gold Plated Part Numbers Connectors 6470 08 6470 09 6470 10 6470 11 6470 12 6470 13 6470 14 6470 15 Posted Connectors 641190 641191 641192 641193 641198 641199 641200 641201 644038 644040 647477 647480 1375820 1744020 Y Y Y Y Y Y Y Y Y* Y* Y* Y* N Y* Y Y Y Y Y Y Y Y Y* Y* Y* Y* N Y* Y Y Y Y Y Y Y Y Y* Y* Y* Y* N Y* Y Y Y Y Y Y Y Y Y* Y* Y* Y* N Y* Y Y Y Y Y Y Y Y Y* Y* Y* Y* N Y* Y Y Y Y Y Y Y Y Y* Y* Y* Y* N Y* Y Y Y Y Y Y Y Y Y* Y* Y* Y* N Y* Y Y Y Y Y Y Y Y Y* Y* Y* Y* N Y* *2 & 3 position MTA-100 Posted Connectors can not mate with MTA-100 connectors with polarizing tabs. 19 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors MTA-100 IDC Posted Connectors (Wire-to-Wire)--Closed End, Feed-Thru Closed End Material and Finish Feed-Thru Housing -- UL 94V-2 rated, nylon, see chart for color Contacts -- Copper alloy, post tin or gold plated over nickel (see chart) B Dim. B Dim. MTA-100 .100 [2.54] Notes: 1. Mating half visuals - pages 14 & 15. 2. Use feed thru strain relief covers & feed thru dust covers (if needed) - page 16. 3. Approved wire listing - pages 70 thru 74. .843 [21.40] .079 [2.00] A Dim. .079 [2.00] A Dim. .025 Sq. [0.54] .025 Sq. [0.54] .303 [7.70] .303 [7.70] .415 [10.54] .415 [10.54] .100 Typ. [2.54] Connector Type & Wire Size The "Base Part Numbers" Chart at right shows the base part number. Prefixes and suffixes are determined by the number of circuit positions in the connector. For example, the complete part number for a 12-position closed end connector for 22 AWG wire would be: Base number 647000 plus prefix-and-suffix 4- -- -2 The correct ordering number is 4-647000-2 All part numbers are the RoHS equivalent version. Example: No. of Pos. 2 19 Lead Free RoHS Prefix/Suffix 3-647000-2 thru 4-647000-9 See page 15 for an explanation of RoHS lead free equivalents. Note: All RoHS equivalent part numbers may not be available upon catalog release. If the number you need is not available, please contact Product Engineering to expedite your request. Color Coding by Wire Size for UL 94V-2 Connectors 22 AWG -- Red 24 AWG -- White 26 AWG -- Blue 28 AWG -- Green .100 Typ. [2.54] Base Part Numbers Connector Ordering Information Part Nos. Standard UL 94V-2, Tin Plated 22 AWG 0.3-0.4 mm2 24 AWG 0.2 mm2 26 AWG 0.12-0.15 mm2 28 AWG 0.08-0.09 mm2 Closed End Connector RoHS Equiv. 32-491 647004 --2 647001 32-491 647005 --2 647002 32-49 1 647006 --2 32-49 1 647007 --2 32-491 647012 --2 32-49 1 647013 --2 32-49 1 647014 --2 32-491 647015 --2 32-491 647020 --2 1 647021 --2 32-491 647022 --2 32-491 647023 --2 647003 Standard UL 94V-2, .000015 [0.00038] Gold Plated 22 AWG 647016 0.3-0.4 mm2 24 AWG 647017 0.2 mm2 26 AWG 647018 0.12-0.15 mm2 28 AWG 647019 0.08-0.09 mm2 2 Feed-Thru Connector Part Nos. No. of Circuits 647000 Standard UL 94V-2, .000030 [0.00076] Gold Plated 22 AWG 647008 0.3-0.4 mm2 24 AWG 647009 0.2 mm2 26 AWG 647010 0.12-0.15 mm2 28 AWG 647011 0.08-0.09 mm2 1 .843 [21.40] 32-49 2 and 3 position MTA-100 Posted Connectors (Closed End) can not mate with MTA-100 connectors with polarizing tabs. Parts may be manufactured upon request. Minimums may apply. Contact product engineer or product manager for details. No. of Circuits 2 3 4 5 Dim. A B .300 .227 [7.62] [5.77] .400 .327 [10.16] [8.31] .500 .427 [12.70] [10.85] .600 .527 [15.24] [13.39] No. of Circuits 6 7 8 9 Dim. A B .700 .627 [17.78] [15.93] .800 .727 [20.32] [18.47] .900 .827 [22.86] [21.01] 1.000 .927 [25.40] [23.55] No. of Circuits 10 11 12 13 Dim. A B 1.100 1.027 [27.94] [26.09] 1.200 1.127 [30.48] [28.63] 1.300 1.227 [33.02] [31.17] 1.400 1.327 [35.56] [33.71] No. of Circuits 14 15 16 17 18 Contacts -- Copper alloy, post tin or gold plated over nickel Performance Data -55C to +105C Voltage Rating -- 250 VAC Current Rating -- 4 amp max. Low-Level Resistance -- 16 m max. initial Dielectric Withstanding Voltage -- 750 VAC/1 min. Insulation Resistance -- 5000 M min. initial Operating Temperature -- Technical Documents Product Specification 108-1050-1 MTA-100 Posted Connector Application Specification 114-1019 MTA-100 Connectors Replacement IDC Contacts Material and Finish 19 Dim. A B 1.500 1.427 [38.10] [36.25] 1.600 1.527 [40.64] [38.79] 1.700 1.627 [43.18] [41.33] 1.800 1.727 [45.72] [43.87] 1.900 1.827 [48.26] [46.41] 2.000 1.927 [50.80] [48.95] Part Numbers Tin .000030 Plated [.00076] Gold Plated 22 0.3-0.4 3-647030-1 3-647030-2 24 0.2 3-647031-1 3-647031-2 26 0.12-0.15 3-647032-1 3-647032-2 28 0.8-0.9 3-647033-1 3-647033-2 Wire Size AWG mm2 .075 [1.91] .083 [2.10] .770 [19.55] .025 [0.64] 20 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors MTA-100 Flat Headers--Straight and Right-Angle Material and Finish Straight Post (.025 [0.64] Square) Right-Angle Post (.025 [0.64] Square) Housing -- UL94V-0 rated, polyester, white Posts -- Copper alloy, tin plated, .000030 [0.00076] or .000015 [0.00038] gold over nickel .200 [5.08] .200 [5.08] A .025 [0.64] Sq. .100 [2.54] .050 Typ. [1.27] Typ. Post No. 1 A .100 [2.54] .295 [7.49] .025 [0.64] Sq. .140 [3.56] Ref. .100 [2.54] For mateability options, see matrix on pages 12 and 13. .062 [1.57] .140 [3.56] Ref. .535 [13.59] .050 [1.27] Typ. MTA-100 .100 [2.54] Notes: 1. Post(s) can be omitted for keying purposes. Specify the desired post(s) to be omitted using the figure to identify Post No. 1. 2. Gold headers are duplex plated, gold on mating end of post and tin on the solder tail. 3. To determine header overall length (dim. A) multiply .100 x the number of posts. Example: .100 x 10 posts equals 1.000 inch [25.4 mm]. Post No. 1 .295 [7.49] .100 [2.54] Typ. For mating half visuals, see pages 14, 15 and 31. Header Ordering Information The "Base Part Numbers" Chart at right shows the base part number. Prefixes and suffixes are determined by the number of post positions in the header. For example, the complete part number for a 10-position header with straight posts would be: Base number 641211 plus prefix-and-suffix 4- -- -0 The correct ordering number is 4-641211-0 All part numbers are the RoHS equivalent version. Example: No. of Pos. 2 28 X = .120 [3.05] min., .240 [6.1] max. when mated with MTA-100 Connector. X = .120 [3.05] min., when mated with CST-100 II Connector. Edge of Board .120 [3.05] Min. .050/.040 Dia. [1.27/1.02] Edge of Board .100 [2.54] Typ. See page 15 for an explanation of RoHS lead free equivalents. Note: All RoHS equivalent part numbers may not be available upon catalog release. If the number you need is not available, please contact Product Engineering to expedite your request. Note: Select load headers (omitted pin headers) are available upon request. Please contact product engineer or product manager for details. .100 Typ. [2.54] X Recommended Mounting Hole Pattern for .062 [1.57] Thk. PC Board Lead Free RoHS Prefix/Suffix 3-641211-2 thru 5-641211-8 .050/.040 Dia. [1.27/1.02] Recommended Mounting Hole Pattern for .062 [1.57] Thk. PC Board Note: Consult Product Drawing for details on placing headers onto PC boards. Base Part Numbers Straight Posts Header No. of Posts/ Part Nos. RoHS Equiv. Standard UL94V-0, Tin Plated 640452 2-28 Right-Angle Posts Header No. of Posts/ Part Nos. RoHS Equiv. 640453 2-28 Standard UL94V-0, .000030 [0.00076] Gold Plated 2-28 641211 641212 32-58 2-28 32-58 Standard UL94V-0, .000015 [0.00038] Gold Plated 2-28 641122 641123 32-58 2-28 32-58 21 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors MTA-100 Narrow Flat Headers--Straight and Right-Angle Material and Finish Straight Post (.025 [0.64] Square) Right-Angle Post (.025 [0.64] Square) Housing -- UL94V-0 rated, polyester, white Posts -- Copper alloy, tin plated, .000030 [0.00076] or .000015 [0.00038] gold over nickel MTA-100 .100 [2.54] Notes: 1. Post(s) can be omitted for keying purposes. Specify the desired post(s) to be omitted using the figure to identify Post No. 1. 2. Headers without retentive legs are suitable for breakaway application. 3. 2 or 3 retentive leg(s) per header, depending upon number of positions. 4. Gold headers are duplex plated, gold on mating end of post and tin on the solder tail. 5. To determine header overall length (dim. A) multiply .100 x the number of posts minus (-) .012. Example: .100 x 10 posts - .012 = .988 inches [25.1 mm]. .110 [2.79] Ref. .0335 [0.85] .092 [2.34] A A .092 [2.34] .100 [2.54] Typ. .150 [3.81] .100 [2.54] Typ. Post No. 1 .295 [7.49] .100 [2.54] Straight and Right-Angle Post with Retentive Legs .100 [2.54] .505 [12.83] For mateability options, see matrix on pages 12 and 13. For mating half visuals, see pages 14, 15 and 31. .044 [1.12] Typ. .025 [0.64] Sq. .260 [6.6] Post No. 1 .044 [1.12] Typ. .025 [0.64] Sq. .110 [2.79] Ref. .110 Ref. [2.79] Connector Ordering Information The "Base Part Numbers" Chart at right shows the base part number. Prefixes and suffixes are determined by the number of post positions in the header. For example, the complete part number for a 10-position header with straight posts and without retentive legs would be: Base number 644456 plus prefix-and-suffix 4- -- -0 The correct ordering number is 4-644456-0 All part numbers are the RoHS equivalent version. Example: No. of Pos. 2 28 Lead Free RoHS Prefix/Suffix 3-644456-2 thru 5-644456-8 See page 15 for an explanation of RoHS lead free equivalents. Note: All RoHS equivalent part numbers may not be available upon catalog release. If the number you need is not available, please contact Product Engineering to expedite your request. Note: Select load headers (omitted pin headers) are available upon request. Please contact product engineer or product manager for details. .100 [2.54] Typ. .100 [2.54] Typ. Edge of Board .050/.040 Dia. [1.27/1.02] For Straight Leg Headers .037 .002 Dia. [0.94 0.05] For Retentive Leg Headers .060 [1.52] Min. Recommended Mounting Hole Pattern for .062 [1.57] Thk. PC Board Edge of Board .050/.040 Dia. [1.27/1.02] For Straight Leg Headers .002 .037 Dia. [0.94 0.05] For Retentive Leg Headers .060 [1.52] Min. Recommended Mounting Hole Pattern for .062 [1.57] Thk. PC Board Note: Consult Product Drawing for details on placing headers onto PC boards. Base Part Numbers Straight Posts Without With Retentive Legs Retentive Legs Header RoHS Header RoHS Part Nos. Equiv. Part Nos. Equiv. Standard UL94V-0, Tin Plated 644456 32-58 Right-Angle Posts Without With Retentive Legs Retentive Legs Header RoHS Header RoHS Part Nos. Equiv. Part Nos. Equiv. 32-58 644457 32-58 644694 32-58 Standard UL94V-0, .000030 [0.00076] Gold Plated 644884 2-28 644886 2-28 644885 2-28 644887 2-28 Standard UL94V-0, .000015 [0.00038] Gold Plated 644888 2-28 644890 2-28 644889 2-28 644891 2-28 644695 High temperature product available. Please contact Sales Engineer or Product Information Center. 22 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors MTA-100 Polarized Headers--Straight and Right-Angle Material and Finish Straight Post (.025 [0.64] Square) Housing -- UL94V-0 rated, polyester, white Posts -- Copper alloy, tin plated, .000030 [0.00076] or .000015 [0.00038] gold over nickel .225 [5.72] .225 [5.72] .125 [3.18] .125 [3.18] A A .100 [2.54] Typ. .025 [0.64] Sq. .035 Min. [0.89] Post No. 1 .295 [7.49] .295 [7.49] .290 [7.37] .535 [13.59] For mateability options, see matrix on pages 12 and 13. For mating half visuals, see pages 14, 15 and 31. .100 [2.54] Typ. .050 [1.27] Typ. .025 [0.64] Sq. .035 [0.89] Min. .050 [1.27] Typ. Post No. 1 MTA-100 .100 [2.54] Notes: 1. Post(s) can be omitted for keying purposes. Specify the desired post(s) to be omitted using the figure to identify Post No. 1. 2. Gold headers are duplex plated, gold on mating end of post and tin on the solder tail. 3. All posts on retentive leg headers are bent. 4. To determine header overall length (dim. A) multiply .100 x the number of posts. Example: .100 x 10 posts equals 1.000 inch [25.4 mm]. Right-Angle Post (.025 [0.64] Square) .290 [7.37] .100 [2.54] .140 [3.56] Ref. .140 Max. [3.56] .140 [3.56] .100 [2.54] Header Ordering Information The "Base Part Numbers" Chart at right shows the base part number. Prefixes and suffixes are determined by the number of post positions in the header. For example, the complete part number for a 10-position header with straight posts would be: Base number 641213 plus prefix-and-suffix 4- -- -0 The correct ordering number is 4-641213-0 All part numbers are the RoHS equivalent version. Example: No. of Pos. 2 28 Lead Free RoHS Prefix/Suffix 3-641213-2 thru 5-641213-8 See page 15 for an explanation of RoHS lead free equivalents. Note: All RoHS equivalent part numbers may not be available upon catalog release. If the number you need is not available, please contact Product Engineering to expedite your request. Note: Select load headers (omitted pin headers) are available upon request. Please contact product engineer or product manager for details. .125 [3.18] Ref. 34 .135 Ref. [3.43] 34 Retentive Leg .050/.040 Dia. for straight [1.27/1.02] leg headers .037 .002 Dia. for retentive [0.94 0.05] leg headers Edge of Board Edge of Board .100 [2.54] Typ. .130 [3.30] Min. Retentive Leg .050/.040 Dia. for straight [1.27/1.02] leg headers .037 .002 Dia. for retentive [0.94 0.05] leg headers X Recommended Mounting Hole Pattern for .062 [1.57] Thk. PC Board .100 [2.54] Typ. X = .110 [2.79] min., .160 [4.06] max. when mated with MTA-100 Connector. X = .110 [2.79] min., .120 [3.05] max. when mated with CST-100 II Connector. Recommended Mounting Hole Pattern for .062 [1.57] Thk. PC Board Note: Consult Product Drawing for details on placing headers onto PC boards. Base Part Numbers Straight Posts Without With Retentive Legs Retentive Legs Header RoHS Header RoHS Part Nos. Equiv. Part Nos. Equiv. Standard UL94V-0, Tin Plated 640454 2-28 Right-Angle Posts Without With Retentive Legs Retentive Legs Header RoHS Header RoHS Part Nos. Equiv. Part Nos. Equiv. 2-28 640455 2-28 644877 2-28 Standard UL94V-0, .000030 [0.00076] Gold Plated 641213 32-58 -- -- 641214 32-58 -- -- Standard UL94V-0, .000015 [0.00038] Gold Plated 641124 32-58 -- -- 641125 32-58 -- -- 644876 23 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors MTA-100 Friction Lock Headers--Straight and Right-Angle Material and Finish Straight Post (.025 [0.64] Square) MTA-100 .100 [2.54] Housing -- UL94V-0 rated, polyester, white Posts -- Copper alloy, tin plated, .000030 [0.00076] or .000015 [0.00038] gold over nickel Right-Angle Post (.025 [0.64] Square) .225 [5.72] .225 [5.72] Notes: 1. Post(s) can be omitted for keying purposes. Specify the desired post(s) to be omitted using the figure to identify Post No. 1. 2. Gold headers are duplex plated, gold on mating end of post and tin on the solder tail. 3. All posts on retentive leg headers are bent. 4. To determine header overall length (dim. A) multiply .100 x the number of posts. Example: .100 x 10 posts equals 1.000 inch [25.4 mm]. .125 [3.18] .125 [3.18] A A .025 [0.64] Sq. .040 [1.02] Max. .295 [7.49] Post No. 1 .050 [1.27] Typ. For mateability options, see matrix on pages 12 and 13. .140 [3.56] Ref. .025 [0.64] Sq. .040 [1.02] Max. .050 [1.27] Typ. .310 [7.87] .535 [13.59] .100 [2.54] Typ. .100 [2.54] Typ. Post No. 1 .100 [2.54] .295 [7.49] .100 [2.54] .310 [7.87] .140 [3.56] .140 [3.56] Max. For mating half visuals, see pages 14, 15 and 31. Header Ordering Information The "Base Part Numbers" Chart at right shows the base part number. Prefixes and suffixes are determined by the number of post positions in the header. For example, the complete part number for a 10-position header with straight posts would be: Base number 641215 plus prefix-and-suffix 4- -- -0 The correct ordering number is 4-641215-0 All part numbers are the RoHS equivalent version. Example: No. of Pos. Standard Prefix/Suffix 2 641215-2 thru 2-641215-8 28 Lead Free RoHS Prefix/Suffix 3-641215-2 .125 [3.18] Ref. 34 Retentive Leg Note: All RoHS equivalent part numbers may not be available upon catalog release. If the number you need is not available, please contact Product Engineering to expedite your request. Note: Select load headers (omitted pin headers) are available upon request. Please contact product engineer or product manager for details. Retentive Leg .050/.040 Dia. for straight [1.27/1.02] leg headers .037 .002 Dia. for retentive [0.94 0.05] leg headers Edge of Board Edge of Board .100 [2.54] Typ. .130 [3.30] Min. .050/.040 Dia. for straight [1.27/1.02] leg headers .037 .002 Dia. for retentive [0.94 0.05] leg headers X Recommended Mounting Hole Pattern for .062 [1.57] Thk. PC Board .100 [2.54] Typ. X = .110 [2.79] min., .160 [4.06] max. when mated with MTA-100 Connector. X = .110 [2.79] min., .120 [3.05] max. when mated with CST-100 II Connector. Recommended Mounting Hole Pattern for .062 [1.57] Thk. PC Board Note: Consult Product Drawing for details on placing headers onto PC boards. 5-641215-8 See page 15 for an explanation of RoHS lead free equivalents. .135 [3.43] 34 Base Part Numbers Straight Posts Without With Retentive Legs Retentive Legs Header RoHS Header RoHS Part Nos. Equiv. Part Nos. Equiv. Standard UL94V-0, Tin Plated 640456 2-28 Right-Angle Posts Without With Retentive Legs Retentive Legs Header RoHS Header RoHS Part Nos. Equiv. Part Nos. Equiv. 2-28 640457 2-28 644875 2-28 Standard UL94V-0, .000030 [0.00076] Gold Plated 641215 32-58 -- -- 641216 32-58 -- -- Standard UL94V-0, .000015 [0.00038] Gold Plated 641126 32-58 -- -- 641127 32-58 -- -- 644874 24 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors Page_Head (Continued) MTA-100 Headers with Retention Peg--Straight Friction Lock Material and Finish .113 [2.87] Housing -- UL94V-0 rated, thermoplastic, black Posts -- Copper alloy, tin plated, .000030 [0.00076] or .000015 [0.00038] gold over nickel .250 [6.35] For mateability options, see matrix on pages 12 and 13. For mating half visuals, see pages 14, 15 and 31. Post No. 1 .135 [3.43] .025 .001 [0.64 0.03] Square Typ. No. of Pos. Standard Prefix/Suffix 2 3 4 5 6 7 8 9 10 11 12 647609-2 647609-3 647609-4 647609-5 647609-6 647609-7 647609-8 647609-9 1-647609-0 1-647609-1 1-647609-2 .125 [3.18] .100 Typ. [2.54] Note: All RoHS equivalent part numbers may not be available upon catalog release. If the number you need is not available, please contact Product Engineering to expedite your request. .347 .010 [8.81 0.25] .550 .010 [13.97 0.25] .113 [2.87] Post No. 1 .290 .010 0.25] .135 [7.37 [3.43] .125 [3.18] .100 Typ. [2.54] .025 .001 [0.64 0.03] Square Typ. .055 Min. [1.39] .250 [6.35] A Lead Free RoHS Prefix/Suffix 3-647609-2 3-647609-3 3-647609-4 3-647609-5 3-647609-6 3-647609-7 3-647609-8 3-647609-9 4-647609-0 4-647609-1 4-647609-2 .290 .010 [7.37 0.25] .070 [1.78] .050 [1.27] Polarized Header Ordering Information The "Base Part Numbers" Chart at right shows the base part number. Prefixes and suffixes are determined by the number of post positions in the header. For example, the complete part number for a 10-position header with straight posts would be: Base number 647609 plus prefix-and-suffix 4- -- -0 The correct ordering number is 4-647609-0 All part numbers are the RoHS equivalent version. Example: .025-.040 [0.64-1.01] MTA-100 .100 [2.54] A Notes: 1. Post(s) can be omitted for keying purposes. Specify the desired post(s) to be omitted using the figure to identify Post No. 1. 2. Gold headers are duplex plated, gold on mating end of post and tin on the solder tail. 3. To determine header overall length (dim. A) multiply .100 x the number of posts. Example: .100 x 10 posts equals 1.000 inch [25.4 mm]. .100 Typ. [2.54] O .052 .002 [1.32 0.05] .055 [1.40] .070 [1.78] .050 [1.27] .347 .010 .550 .010 [8.81 0.25] [13.97 0.25] .070 Min. [1.78] .090 [2.29] O .040 .003 [1.02 0.07 ] Recommended Mounting Hole Pattern for .062 [1.57] Thk. PC Board Note: Consult Product Drawing for details on placing headers onto PC boards. Base Part Numbers Friction Lock Header RoHS Part Nos. Equiv. Header Part Nos. Polarized RoHS Equiv. Standard UL94V-0, Tin Plated 647609 32-42 647623 32-42 Standard UL94V-0, .000030 [0.00076] Gold Plated 647626 32-42 647624 32-42 Standard UL94V-0, .000015 [0.00038] Gold Plated 647627 32-42 647625 32-42 Note: Select load headers (omitted pin headers) are available upon request. Please contact product engineer or product manager for details. 25 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors MTA-100 .100 [2.54] MTA-100 High Profile Headers--Right-Angle Material and Finish Friction Lock Polarized Housing -- UL94V-0 rated, thermoplastic, black Posts -- Copper alloy, tin plated, .000030 [0.00076] or .000015 [0.00038] gold over nickel Right-Angle Post (.025 [0.64] Square) Right-Angle Post (.025 [0.64] Square) A Notes: 1. Post(s) can be omitted for keying .250 purposes. Specify the desired [6.35] post(s) to be omitted using the figure to identify Post No. 1. 2. Gold headers are duplex plated, gold on mating end of post and tin on the solder tail. 3. To determine header overall length (dim. A) multiply .100 x the number of posts. Example: .100 x 10 posts equals 1.000 inch [25.4 mm]. 4. This product can be mounted in the middle of the PC Board as shown in the PCB layout. .250 [6.35] A .025 [0.64] Sq. .290 [7.37] .050 [1.27] 2 3 4 5 6 7 8 9 10 11 12 Lead Free RoHS Prefix/Suffix 3-647630-2 3-647630-3 3-647630-4 3-647630-5 3-647630-6 3-647630-7 3-647630-8 3-647630-9 4-647630-0 4-647630-1 4-647630-2 .070 [1.78] .050 [1.27] .112 [2.84] .125 [3.18] .347 [8.81] .140 [3.56] .125 [3.18] The "Base Part Numbers" Chart at right shows the base part number. Prefixes and suffixes are determined by the number of post positions in the header. For example, the complete part number for a 10-position header with right-angle posts would be: Base number 647630 plus prefix-and-suffix 4- -- -0 The correct ordering number is 4-647630-0 All part numbers are the RoHS equivalent version. Example: No. of Pos. .100 [2.54] .290 Post No. 1 [7.37] .347 [8.81] .112 [2.84] .100 [2.54] .025 [0.64] Sq. .040 [1.02] Max. Post No. 1 For mateability options, see matrix on pages 12 and 13. For mating half visuals, see pages 14, 15 and 31. Header Ordering Information .113 [2.87] .113 [2.87] .100 Typ. [2.54] .040 .003 Dia. [1.02 0.07] Note: Consult Product Drawing for details on placing headers onto PC boards. Recommended Mounting Hole Pattern for .062 [1.57] Thk. PC Board Base Part Numbers Friction Lock Right-Angle Posts Header RoHS Part Nos. Equiv. Standard UL94V-0, Tin Plated 647630 32-42 Polarized Right-Angle Posts Header RoHS Part Nos. Equiv. 647651 32-42 Standard UL94V-0, .000030 [0.00076] Gold Plated 647629 32-42 647653 32-42 Standard UL94V-0, .000015 [0.00038] Gold Plated 647628 32-42 647652 32-42 Note: All RoHS equivalent part numbers may not be available upon catalog release. If the number you need is not available, please contact Product Engineering to expedite your request. Note: Select load headers (omitted pin headers) are available upon request. Please contact product engineer or product manager for details. 26 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors Page_Head (Continued) MTA-100 Polarized High Temperature Headers--Straight and Right-Angle Material and Finish For use with Infrared Reflow Process Notes: 1. Post(s) can be omitted for keying purposes. Specify the desired post(s) to be omitted using the figure to identify Post No. 1. 2. Gold headers are duplex plated, gold on mating end of post and tin on the solder tail. 3. To determine header overall length (dim. A) multiply .100 x the number of posts. Example: .100 x 10 posts equals 1.000 inch [25.4 mm]. Straight Post (.025 [0.64] Square) .250 [6.35] 2 12 13 18 Lead Free RoHS Prefix/Suffix 3-647047-2 thru 4-647047-2 NA thru NA .250 [6.35] .113 [2.87] .113 [2.87] A .100 [2.54] .025 [0.64] Sq. .070 [1.78] .050 [1.27] Post No. 1 .025 [0.64] Sq. .290 [7.37] .125 [3.18] .070 [1.78] .050 [1.27] .112 [2.84] .135 [3.43] .060 [1.52] Pre-Tinned Land Both Sides Typ. .100 [2.54] .290 Post No. 1 [7.37] .347 [8.81] .550 [13.97] Header Ordering Information No. of Pos. Right-Angle Post (.025 [0.64] Square) A For mateability options, see matrix on pages 12 and 13. For mating half visuals, see pages 14, 15 and 31. The "Base Part Numbers" Chart at right shows the base part number. Prefixes and suffixes are determined by the number of post positions in the header. For example, the complete part number for a 10-position header with straight posts would be: Base number 647047 plus prefix-and-suffix 4- -- -0 The correct ordering number is 4-647047-0 All part numbers are the RoHS equivalent version. Example: Maximum Temperature Rating: 2-12 Position: 280C 13-18 Position: 235C MTA-100 .100 [2.54] Housing -- 2-12 Position -- UL94V-0 rated, nylon, black 13-18 Position -- UL94V-0 rated, LCP, black Posts -- Copper alloy, tin plated, .000030 [0.00076] or .000015 [0.00038] gold over nickel .347 [8.81] .140 [3.56] .125 [3.18] .008 [0.20] Min. Thk. Solder Paste In Area Shown .100 [2.54] Typ. Post No. 1 .040 [1.02] Pre-Tinned Plated Thru Hole Typ. .300 [7.62] .150 [3.81] Note: Consult Product Drawing for details on placing headers onto PC boards. .0325 [0.826] .065 [1.65] Recommended Mounting Hole Pattern for .062 [1.57] Thick PC Board Base Part Numbers Straight Posts Header RoHS Part Nos. Equiv. Straight Posts (Tube Loaded) Header RoHS Part Nos. Equiv. Right-Angle Posts Header RoHS Part Nos. Equiv. See page 15 for an explanation of RoHS lead free equivalents. Standard UL94V-0, Tin Plated 647047 32-42 647298 32-42 647048 32-42 Note: All RoHS equivalent part numbers may not be available upon catalog release. If the number you need is not available, please contact Product Engineering to expedite your request. Standard UL94V-0, .000030 [0.00076] Gold Plated 647109 32-42 647300 32-42 647114 32-42 Standard UL94V-0, .000015 [0.00038] Gold Plated 647075 32-42 647299 32-42 647076 32-42 Note: Select load headers (omitted pin headers) are available upon request. Please contact product engineer or product manager for details. 27 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors MTA-100 Friction Lock High Temperature Headers--Straight and Right-Angle For use with Infrared Reflow Process Material and Finish MTA-100 .100 [2.54] Housing -- 2-12 Position -- UL94V-0 rated, nylon, black 13-18 Position -- UL94V-0 rated, LCP, black Posts -- Copper alloy, tin plated, .000030 [0.00076] or .000015 [0.00038] gold over nickel Notes: 1. Post(s) can be omitted for keying purposes. Specify the desired post(s) to be omitted using the figure to identify Post No. 1. 2. Gold headers are duplex plated, gold on mating end of post and tin on the solder tail. 3. To determine header overall length (dim. A) multiply .100 x the number of posts. Example: .100 x 10 posts equals 1.000 inch [25.4 mm]. For mateability options, see matrix on pages 12 and 13. For mating half visuals, see pages 14, 15 and 31. Straight Post (.025 [0.64] Square) .250 [6.35] 2 647050-2 thru 1-647050-2 1-647050-3 thru 1-647050-8 12 13 Lead Free RoHS Prefix/Suffix 3-647050-2 4-647050-2 NA .113 [2.87] .113 [2.87] A A .025 [0.64] Sq. .040 [1.02] Max. Post No. 1 .290 [7.37] .050 [1.27] .100 [2.54] .125 [3.18] .025 [0.64] Sq. .290 [7.37] .347 [8.81] .112 [2.84] .130 [3.30] .050 [1.27] .100 [2.54] .125 [3.18] .008 [0.20] Min. Thk. Solder Paste In Area Shown .100 [2.54] Typ. .060 [1.52] Pre-Tinned Land Both Sides Typ. .040 [1.02] Max. Post No. 1 .347 [8.81] .550 [13.97] The "Base Part Numbers" Chart at right shows the base part number. Prefixes and suffixes are determined by the number of post positions in the header. For example, the complete part number for a 10-position header with straight posts would be: Base number 647050 plus prefix-and-suffix 4- -- -0 The correct ordering number is 4-647050-0 All part numbers are the RoHS equivalent version. Example: Standard Prefix/Suffix Right-Angle Post (.025 [0.64] Square) .250 [6.35] Header Ordering Information No. of Pos. Maximum Temperature Rating: 2-12 Position: 280C 13-18 Position: 235C Post No. 1 .040 [1.02] Pre-Tinned Plated Thru Hole Typ. .300 [7.62] .150 [3.81] Note: Consult Product Drawing for details on placing headers onto PC boards. .0325 [0.826] .065 [1.65] Recommended Mounting Hole Pattern for .062 [1.57] Thick PC Board Base Part Numbers Straight Posts Header RoHS Part Nos. Equiv. Straight Posts (Tube Loaded) Header RoHS Part Nos. Equiv. Standard UL94V-0, Tin Plated 647050 32-42 Right-Angle Posts Header RoHS Part Nos. Equiv. 647295 32-42 647051 32-42 See page 15 for an explanation of RoHS lead free equivalents. Standard UL94V-0, .000030 [0.00076] Gold Plated 647116 32-42 647297 32-42 647117 32-42 Note: All RoHS equivalent part numbers may not be available upon catalog release. If the number you need is not available, please contact Product Engineering to expedite your request. Standard UL94V-0, .000015 [0.00038] Gold Plated 647078 32-42 647296 32-42 647079 32-42 18 NA Note: Select load headers (omitted pin headers) are available upon request. Please contact product engineer or product manager for details. 28 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors MTA-100 Polarized and Friction Lock Surface Mount Headers--Straight Material and Finish For use with Infrared Reflow Process Notes: 1. Post(s) can be omitted for keying purposes. Specify the desired post(s) to be omitted using the figure to identify Post No. 1. 2. Gold headers are duplex plated, gold on mating end of post and tin on the solder tail. 3. To determine header overall length (dim. A) multiply .100 x the number of posts. Example: .100 x 10 posts equals 1.000 inch [25.4 mm]. For mateability options, see matrix on pages 12 and 13. For mating half visuals, see pages 14, 15 and 31. Polarized Header Friction Lock Header .113 [2.87] .318 [8.08] Ref. .113 [2.87] .318 [8.08] Ref. .250 [6.35] .025 [0.64] Sq. .290 [7.37] .050 [1.27] .100 [2.54] .290 [7.37] .347 [8.81] .159 [4.04] Typ. .125 [3.18] .040 [1.02] Max. Post No. 1 .100 [2.54] .050 [1.27] .125 [3.18] .347 [8.81] .159 [4.04] .100 [2.54] Typ. Post No. 1 The "Base Part Numbers" Chart at right shows the base part number. Prefixes and suffixes are determined by the number of post positions in the header. For example, the complete part number for a 10-position surface mount polarized header would be: Base number 647106 plus prefix-and-suffix 4- -- -0 The correct ordering number is 4-647106-0 All part numbers are the RoHS equivalent version. Example: 2 12 .250 [6.35] .025 [0.64] Sq. .070 [1.78] Post No. 1 Header Ordering Information No. of Pos. Maximum Temperature Rating: 2-12 Position: 280C 13-18 Position: 235C MTA-100 .100 [2.54] Housing -- 2-12 Position -- UL94V-0 rated, nylon, black 13-18 Position -- UL94V-0 rated, LCP, black Posts -- Copper alloy, tin plated, .000030 [0.00076] or .000015 [0.00038] gold over nickel Lead Free RoHS Prefix/Suffix 3-647106-2 4-647106-2 See page 15 for an explanation of RoHS lead free equivalents. Note: All RoHS equivalent part numbers may not be available upon catalog release. If the number you need is not available, please contact Product Engineering to expedite your request. .060 [1.52] .235 [5.97] Note: Consult Product Drawing for details on placing headers onto PC boards. .070 [1.78] Recommended PC Board Layout for use with .010 [0.25] Thick Stencil Base Part Numbers Polarized Headers Header RoHS Part Nos. Equiv. Standard UL94V-0, Tin Plated 647106 32-42 Friction Lock Headers Header RoHS Part Nos. Equiv. 647166 32-42 Standard UL94V-0, .000030 [0.00076] Gold Plated 647108 32-42 647168 32-42 Standard UL94V-0, .000015 [0.00038] Gold Plated 647107 32-42 647167 32-42 Tape Mount Part Numbers Polarized Headers Header RoHS Part Nos. Equiv. Standard UL94V-0, Tin Plated 647531 32-42 Friction Lock Headers Header RoHS Part Nos. Equiv. 647502 32-42 Standard UL94V-0, .000030 [0.00076] Gold Plated 1744163 32-42 Standard UL94V-0, .000015 [0.00038] Gold Plated 647467 32-42 Note: Select load headers (omitted pin headers) are available upon request. Please contact product engineer or product manager for details. 29 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors MTA-100 Shrouded Headers--Straight and Right-Angle Material and Finish Straight Post (.025 [0.64] Square) Housing -- UL94V-0 rated, polyester, black Posts -- Copper alloy, tin plated; or .000030 [0.00076] gold over nickel Post No. 1 Post No. 1 Notes: 1. Post(s) can be omitted for keying purposes. Specify the desired post(s) to be omitted using the figure to identify Post No. 1. 2. Headers with .000015 [0.00038] gold plated post are available upon request. Minimums may apply. 3. Gold headers are duplex plated, gold on mating end of post and tin on the solder tail. MTA-100 .100 [2.54] Right-Angle (.025 [0.64] Square) A A .313 [7.95] For mateability options, see matrix on pages 12 and 13. For mating half visuals, see pages 14 and 15. .025 [0.64] Typ. .092 [2.34] Typ. Ref. .100 [2.54] Header Ordering Information .313 [7.95] .410 [10.41] .200 [5.08] .140 [3.56] .125 [3.18] .410 [10.41] .440 [11.18] .025 [0.64] Typ. .130 .092 [2.34] [3.30] Typ. Ref. .137 [3.48] Ref. .100 [2.54] .176 [4.47] Ref. .107 [2.72] Ref. .200 [5.08] .050 [1.27] Max. .176 [4.47] Ref. Front Bend The "Base Part Numbers" Chart at right shows the base part number. Prefixes and suffixes are determined by the number of post positions in the header. For example, the complete part number for a 10-position header with straight posts and with pegs would be: Base number 644486 plus prefix-and-suffix 4- -- -0 The correct ordering number is 4-644486-0 See page 15 for an explanation of RoHS lead free equivalents. Note: All RoHS equivalent part numbers may not be available upon catalog release. If the number you need is not available, please contact Product Engineering to expedite your request. Notes: 1. Select load headers (omitted pin headers) are available upon request. Please contact product engineer or product manager for details. 2. MTA-100 shrouded headers do not mate with CST-100 II housings. .206 [5.23] Ref. Polarized Retention Peg .125 [3.18] Min. .300 [7.62] Max. .042 [1.07] Edge of Board .130 [3.30] Ref. Edge of Board Rear Bend .124 [3.15] .100 [2.54] Typ. .050/.040 Dia. [1.27/1.02] .050/.040 Dia. [1.27/1.02] .100 [2.54] Typ. Note: Consult Product Drawing for details on placing headers onto PC boards. .081/.075 Dia. [2.06/1.91] Recommended Mounting Hole Pattern for .062 [1.57] Thk. PC Board (Solder Side of Board Shown) Recommended Mounting Hole Pattern for .062 [1.57] Thk. PC Board (Solder Side of Board Shown) Base Part Numbers Straight Posts Header Part Nos. RoHS Equiv. Right-Angle Posts Without Pegs Only Front Bend Rear Bend Header RoHS Header RoHS Part Nos. Equiv. Part Nos. Equiv. 644861 22-34 644488 22-34 644803 22-34 -- 644489 22-34 -- -- With Pegs Header Part Nos. Without Pegs RoHS Equiv. Standard UL94V-0, Tin Plated 644486 22-34 Standard UL94V-0, .000030 [0.00076] Gold Plated 644487 22-34 -- Header Length No. of Circuits 2 3 4 5 Dim. A .284 7.21 .384 9.75 .484 12.29 .584 14.83 Prefix/ Suffix No. of Circuits 3- -2 6 3- -3 7 3- -4 8 3- -5 9 Dim. A .684 17.37 .784 19.91 .884 22.45 .984 24.99 Prefix/ Suffix No. of Circuits 3- -6 10 3- -7 11 3- -8 12 3- -9 13 Dim. A 1.084 27.53 1.184 30.07 1.284 32.61 1.384 35.15 Prefix/ Suffix No. of Circuits 4- -0 14 Dim. A 1.484 37.69 Prefix/ Suffix 4- -4 4- -1 4- -2 4- -3 30 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors .100 [2.54] Centerline CST-100 II Crimp Contacts and Housings Product Facts Application Tooling Low cost wire-to-board interconnections Wide wire range for single contact Tin and gold plated contacts Mates with specified MTA and similar competitive notched headers Plastic latching feature in housing helps prevent contact backout Locking ramps and polarizing tabs are standard For keying purposes use keying plug 641994-1 (page 17) Recognized under the Component Program of Underwriters Laboratories Inc., File No. E28476 Certified by Canadian Standards (R) Association, File No. LR7189 For mateability options, see matrix on pages 12 and 13. For mating half visuals, see pages 21 thru 29 and 32. See page 15 for an explanation of RoHS lead free equivalents. Loose Piece Contacts -- Hand Tool No. 58517-3 (408-4064) Strip Contacts -- AMP-O-LECTRIC Model "G" Termination Machine* Applicator No. 567373-3 (Request Catalog 65828) AMP-O-MATIC Stripper-Crimper Machine* Applicator No. 567910-1 or 567827-1 (with CQM) (Request Catalog 65004) AMPOMATOR CLS IIIG Lead Making Machine* (Request Catalog 82659) *Requires applicators. For part numbers, call Technical Support. Contacts Part Numbers Tin Plated 15 Au Gold Plated 30 Au Gold Plated 1375819-1 (Strip) 1375819-2 (Strip) 1375819-3 (Strip) 1445336-1 (Loose Piece) 1445336-2 (Loose Piece) 1445336-3 (Loose Piece) Phosphor bronze, pretinned or .000015 [.00038] gold, over nickel .000030 [0.00076] gold over nickel Wire Range -- 22-26 AWG [0.35-0.13 mm2] Max. Ins. Dia. -- .065 [1.65] Housing* Material (RoHS Compliant) UL94V-0 rated, nylon, white No. of Pos. 3 4 5 Performance Data 6 7 8 9 10 11 Technical Documents Product Specification 108-1948 Application Specification 114-13036 Instruction Sheet 408-8493 .440 [11.17] .016.002 [.406.051] Material and Finish (RoHS Compliant) 2 Voltage Rating -- 250 vac Current Rating -- 4 amp max. Low-Level Resistance -- 6 m max. initial; 10 m max. final Insulation Resistance -- 1000 M min. initial; 100 M min. final Operating Temperature -- 55 C to 105 C .195 [4.95] CST-100 II .100 [2.54] 12 13 14 15 Dim. A .220 5.59 .320 8.13 .420 10.67 .520 13.21 .620 15.75 .720 18.29 .820 20.83 .920 23.37 1.020 25.91 1.120 28.45 1.220 30.99 1.320 33.53 1.420 36.07 1.520 38.61 Part Numbers No. of Pos. 1375820-2 16 1375820-3 17 1375820-4 18 1375820-5 19 1375820-6 20 1375820-7 21 1375820-8 22 1375820-9 23 1-1375820-0 24 1-1375820-1 25 1-1375820-2 26 1-1375820-3 27 1-1375820-4 28 Dim. A 1.620 41.15 1.720 43.69 1.820 46.23 1.920 48.77 2.020 51.31 2.120 53.85 2.220 56.39 2.320 58.93 2.420 61.47 2.520 64.01 2.620 66.55 2.720 69.09 2.820 71.63 Part Numbers .100 [2.54] Typ. 1-1375820-6 1-1375820-7 .060 [1.52] Typ. 1-1375820-8 1-1375820-9 2-1375820-0 A 2-1375820-1 .510 [12.95] 2-1375820-2 2-1375820-3 .260 [6.60] .190 Ref. [4.83] 2-1375820-4 2-1375820-5 2-1375820-6 2-1375820-7 2-1375820-8 *Housings without polarizing tabs may be manufactured upon request. Minimums may apply. Contact product engineering or product manager for details. 1-1375820-5 31 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors CST-100 II Shrouded Headers--Straight and Right-Angle Material and Finish Straight Post (.025 [0.64] Square) Right-Angle (.025 [0.64] Square) Housing -- UL94V-0 rated, polyester, black Posts -- Copper alloy, tin plated; or .000030 [0.00076] gold over nickel Post No. 1 Post No. 1 CST-100 II .100 [2.54] Notes: 1. Post(s) can be omitted for keying purposes. Specify the desired post(s) to be omitted using the figure to identify Post No. 1. 2. Headers with .000015 [0.00038] gold plated posts are available upon request. Minimums may apply. 3. Gold headers are duplex plated, gold on mating end of post and tin on the solder tail. For mateability options, see matrix on pages 12 and 13. For mating half visuals, see page 31. A A .313 [7.95] .025 [0.64] Typ. .092 [2.34] Ref. .100 [2.54] .410 [10.41] .280 [7.11] .140 [3.56] .125 [3.18] No. of Pos. 2 14 Lead Free RoHS Prefix/Suffix 3-644893-2 thru 4-644893-4 See page 15 for an explanation of RoHS lead free equivalents. Note: All RoHS equivalent part numbers may not be available upon catalog release. If the number you need is not available, please contact Product Engineering to expedite your request. Note: CST-100 II shrouded headers only mate with CST-100 II housings. All the MTA-100 headers except the MTA-100 shrouded headers mate with CST-100 II housings. .280 [7.11] .036 .520 [0.91] Max. [13.21] .107 [2.72] Ref. .025 [0.64] Typ. .140 [3.56] .100 [2.54] .042 [1.07] Edge of Board .050/.040 Dia. [1.27/1.02] .107 [2.72] Ref. .176 [4.47] Ref. Note: Consult Product Drawing for details on placing headers onto PC boards. Polarized Retention Peg .125 [3.18] Min. .092 [2.34] Typ. .176 [4.47] Ref. Header Ordering Information The "Base Part Numbers" Chart at right shows the base part number and number of posts available for the described headers. Prefixes and suffixes are determined by the number of post positions in the header. For example, the complete part number for a 10-position header with straight posts and with pegs would be: Base number 644893 plus prefix-and-suffix 4- -- -0 The correct ordering number is 4-644893-0 All part numbers are the RoHS equivalent version. Example: .313 [7.95] .450 [11.43] Max. .124 [3.15] .100 [2.54] Typ. Edge of Board .050/.040 Dia. [1.27/1.02] .081/.075 Dia. [2.06/1.91] Recommended Mounting Hole Pattern for .062 [1.57] Thk. PC Board (Solder Side of Board Shown) .100 [2.54] Typ. Recommended Mounting Hole Pattern for .062 [1.57] Thk. PC Board (Solder Side of Board Shown) Base Part Numbers Straight Posts With Pegs Right-Angle Posts Without Pegs Only Without Pegs Header Part Nos. No. of Posts/ RoHS Equiv. Header Part Nos. No. of Posts/ RoHS Equiv. 644892 32-44 644894 32-44 Standard UL94V-0, .000030 [0.00076] Gold Plated 644897 32-44 644896 32-44 644898 32-44 Header Part Nos. No. of Posts/ RoHS Equiv. Standard UL94V-0, Tin Plated 644893 32-44 Header Length No. of Circuits 2 3 4 Dim. A .284 7.21 .384 9.75 .484 12.29 Prefix/ Suffix No. of Circuits 3- -2 5 3- -3 6 3- -4 7 Dim. A .584 14.83 .684 17.37 .784 19.91 Prefix/ Suffix No. of Circuits 3- -5 8 3- -6 9 3- -7 10 Dim. A .884 22.45 .984 24.99 1.084 27.53 Prefix/ Suffix 3- -8 3- -9 4- -0 32 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors .156 [3.96] Centerline MTA-156 IDC Connectors and Headers Product Facts Connectors and headers for 2 through 24 positions; wire sizes of 18, 20, 22, 24 and 26 AWG [0 .9- 0.12 mm2] Connectors and headers, except shrouded headers, are end-to-end stackable Quad Connectors for higher current rating (page 54) Posted connectors for 2, 3, 4, 6, 9,12,15 and 24 positions Card edge connectors for 3, 6, 9,12,15,18 and 20 through 24 positions Connectors preloaded with IDC contacts All contacts are slotted for insulation displacement (IDC) termination technique Connector styles include both closed end and feedthru, with and without locking ramps and polarizing tabs Molded ribs on housing do not allow reverse mating Contacts are lubricated for fretting corrosion protection Benefits derived from the MTA-156 system include increases quality and ease of handling such as -- One-step assembly No wire stripping No contact damage Reduced wiring errors Simpler tooling Simple maintenance and repair Meets the material requirements of Table 23.1 of UL 1410 Standards for Television Receiver and Video Products (wire-topost connectors only) Recognized under the Component Program of Underwriters Laboratories Inc., File No. E28476 R Certified by Canadian Standards Association, File No. LR7189 MTA-156 .156 [3.96] MTA-156 connectors accept discrete and ribbon cable wire sizes ranging from 18 - 26 AWG [0.9- 0.12 mm2] with maximum insulation outside diameter.095 [2.41] for single wire and .070 [1.78] for mass termination of wires. Tin plated solid, fused stranded or stranded (7, 16, and 19 strands) wire with PVC insulation can be used on 18 AWG [0.8 - 0.9 mm2] MTA-156 connectors; 7, 10, and 19 stranded wire on 20 AWG [0.5 - 0.6 mm2 ] MTA-156 connectors; and 7 and 19 stranded wire on 22 - 26 AWG [0.4 - 0.12 mm2] MTA-156 connectors. The wire-to-post connector housing material is flame retardant thermoplastic, either UL94V-2 or UL94V-0 rated. A full line of .156 [3.96] centerline headers completes the system. Headers are available with straight or right-angle posts, in flat friction lock and shrouded styles. Headers are available in 2 through 24 positions. Performance Data* Voltage Rating -- 600 vac Current Rating -- 7 amp max. for MTA-156 Connector Low-Level Resistance -- 3.0 m max. initial Dielectric Withstanding Voltage -- 2200 vac/1 min. Insulation Resistance -- 5000 M min. initial Operating Temperature -- 55 C to 105 C *Refer to the Product Specification for additional electrical, mechanical and environmental performance tests and requirements. Only one wire to be terminated into an IDC contact slot. Technical Documents Mass termination of wire provides the lowest applied cost because it drastically reduces the labor content of virtually any cable or harness assembly required. Application Specifications 114-1020 MTA-156 Connectors, Posted Connectors and Card Edge Connectors Product Specification 108-1051 MTA-156 Connectors Note: Refer to page 70 for approved wire listings. 114-1032 MTA-156 Ribbon Cable Assembly R 33 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 Matrix for Tin Plated Part Numbers Connectors MTA-156 .156 [3.96] This matrix has been prepared to assist you, our customer, in defining the correct mating halves for the MTA-156 header and connector combination. Where a "Y" is indicated the combination is a valid mating pair. Where an "N" is indicated the combination is not acceptable for mating. 640426 640427 640428 640429 640430 640431 640432 640433 640434 640435 640472 640473 640474 640475 640476 640477 640478 640479 640480 640481 640595 640599 640600 640601 640602 640604 640605 640606 640607 640608 641301 641302 641303 641304 641305 641306 641307 641308 641309 641310 643817 643818 643819 643820 643821 644082 644461 644462 644463 644464 644465 644466 644467 644468 644469 644470 644471 644472 644501 644502 644566 644567 644569 644570 644572 644783 644791 644860 644878 6403 84 6403 85 6403 87 6403 88 6403 89 6404 45 6446 11 6446 12 6446 13 6446 14 6446 15 6446 16 6446 17 6447 49 6447 50 6447 51 6447 52 6447 53 6447 54 6447 55 6471 23 6471 24 6471 25 6471 26 6471 27 6471 28 6471 29 6471 30 6472 10 6472 11 6472 12 6472 27 6472 28 6472 29 6472 30 6476 46 6476 48 1744 017 83 6403 MTA-156 Connector/ Header Mateability Guide He a d e rs MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y N N N N N Y Y Y Y Y N N N N N Y Y Y Y Y N N N N N Y Y Y Y Y N N N N N Y Y Y Y Y N N N N N Y Y Y Y Y N N N N Y Y Y Y Y Y Y Y Y Y Y N Y N N Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y N N N N N Y Y Y Y Y N N N N N Y Y Y Y Y N N N N N Y Y Y Y Y N N N N N Y Y Y Y Y N N N N N Y Y Y Y Y N N N N Y Y Y Y Y Y Y Y Y Y Y N Y N N Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y N N N N N Y Y Y Y Y N N N N N Y Y Y Y Y N N N N N Y Y Y Y Y N N N N N Y Y Y Y Y N N N N N Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y N N N N Y Y Y Y Y Y Y Y Y Y Y N Y N N Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y N N N N N Y Y Y Y Y N N N N N Y Y Y Y Y N N N N N Y Y Y Y Y N N N N N Y Y Y Y Y N N N N N Y Y Y Y Y N N N N Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y N N N N N Y Y Y Y Y N N N N N Y Y Y Y Y N N N N N Y Y Y Y Y N N N N N Y Y Y Y Y N N N N N Y Y Y Y Y N N N N Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y N Y N N Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y N Y N N Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y 34 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors MTA-156 Connector/Header Mateability Guide (Continued) This matrix has been prepared to assist you, our customer, in defining the correct mating halves for the MTA-156 header and connector combination. Where a "Y" is indicated the combination is a valid mating pair. Where an "N" is indicated the combination is not acceptable for mating. Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y 6412 07 6412 08 6412 09 6412 10 6446 27 6446 28 6446 29 6446 30 6446 31 6446 32 6446 33 6447 56 6447 57 6447 58 6447 59 6447 60 6447 61 6447 62 6471 31 6471 32 6471 33 6471 34 6471 35 6471 36 6412 02 Matrix for .000015 [0.00038] Gold Plated Part Numbers 6412 6412 Connectors Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y N N N N N Y Y Y Y Y N N N N N Y Y Y Y Y N N N Y N N Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y N N N N N Y Y Y Y Y N N N N N Y Y Y Y Y N N N Y N N Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y N N N N N Y Y Y Y Y N N N N N Y Y Y Y Y N N N Y N N Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y MTA-156 .156 [3.96] 641217 641218 641219 641220 641221 641222 641223 641224 641225 641226 641227 641228 641229 641230 641231 641232 641233 641234 641235 641236 644460 644662 644663 644687 644718 644720 03 04 Headers Matrix for .000030 [0.00076] Gold Plated Part Numbers Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y 6411 18 6411 19 6411 20 6411 21 6447 63 6447 64 6447 65 6447 66 6447 67 6447 68 6447 69 6471 39 6471 40 6471 41 6471 42 6471 43 6471 44 6476 49 15 Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y 6411 14 Connectors 641148 641149 641150 641151 641152 641153 641154 641155 641156 641157 641168 641169 641170 641171 641172 641173 641174 641175 641176 641177 644284 647478 647479 647496 6411 Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y 6411 13 Headers N N N N N Y Y Y Y Y N N N N N Y Y Y Y Y N N N Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y N N N N N Y Y Y Y Y N N N N N Y Y Y Y Y N N N Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y 35 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors MTA-156 IDC Connectors--Closed End Material and Finish Closed End with Locking Ramp Housing -- UL94V-2 rated, nylon, see below for color; or UL94V-0 rated, nylon, black Contacts -- Phosphor bronze, post tin plated, .000030 [0.00076] or .000015 [.00038] post gold plated over nickel .245 [6.22] .050 [1.27] .725 [18.42] .156 Typ. [3.96] without Polarizing Tabs .100 [2.54] .258 [6.56] All Wire Sizes in UL94V-0 -- Black Notes: 1. Only connectors with locking ramp and without polarizing tabs mate with posted connectors on page 45. 2. Refer to pages 70 thru 74 for approved wire listing. 3. For strain reliefs and dust covers, see pages 40 and 41. 4. For keying plugs and panel mount end caps, see page 42. 5. Other circuit sizes are available upon request. Minimums may apply. 6. Connector circuits can be molded closed for keying purposes. Minimums may apply. 7. Where no part numbers appear in the chart, parts can be made available upon request. Minimums may apply. 8. To determine connector overall length (Dim. A), multiply .156 x the number of circuits. Example: .156 x 10 circuits equals 1.560 inches [39.62 mm]. .097 [2.46] .230 [5.84] .355 .325 [9.02] [8.26] Color Coding by Wire Size for UL94V-2 Connectors 26 AWG -- Blue 24 AWG -- White 22 AWG -- Red 20 AWG -- Yellow 18 AWG -- Orange MTA-156 .156 [3.96] A .100 [2.54] with Polarizing Tabs .050 [1.27] For mateability options, see matrix on pages 34 and 35. Mating half visuals for Closed End Connectors with Locking Ramp, see pages 45 thru 48, 50, 52, and 53, (49 and 51 Front Bend Headers Only). Closed End without Locking Ramp .245 [6.22] A .047 [1.19] .355 .325 [9.02] [8.26] .180 [4.57] .050 [1.27] .725 [18.42] .156 Typ. [3.96] without Polarizing Tabs .100 [2.54] .258 [6.56] with Polarizing Tabs .050 [1.27] For mateability options, see matrix on pages 34 and 35. Mating half visuals for Closed End Connectors without Locking Ramp, see pages 46 thru 53. 36 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors MTA-156 IDC Connectors--Closed End (Continued) Connector Ordering Information Base Part Numbers The "Base Part Numbers" Chart at right shows the base part number and number of circuits available for the described connectors. Base number 640426 plus prefix-and-suffix 4- -- -0 The correct ordering number is 4-640426-0 All part numbers in bold face are the RoHS equivalent version. Example: No. of Pos. 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 Lead Free RoHS Prefix/Suffix 3-640426-2 3-640426-3 3-640426-4 3-640426-5 3-640426-6 3-640426-7 3-640426-8 3-640426-9 4-640426-0 4-640426-1 4-640426-2 4-640426-3 4-640426-4 4-640426-5 4-640426-6 4-640426-7 4-640426-8 4-640426-9 5-640426-0 5-640426-1 5-640426-2 5-640426-3 5-640426-4 Connector Type & Wire Size Connector Part Nos. Standard UL94V-2, Tin Plated 18 AWG 640426 0.8-0.9 mm2 20 AWG 640427 0.5-0.6 mm2 22 AWG 640428 0.3-0.4 mm2 24 AWG 640429 0.2 mm2 26 AWG 640430 0.12-0.15 mm2 Connector RoHS Equiv. 32-54 32-54 Connector Part RoHS Nos. Equiv. 643817 643818 32-54 32-54 Connector Part Nos. RoHS Equiv. Part Nos. 640431 32-54 644461 640432 32-54 RoHS Equiv. 1 32-44 1 32-44 1 644462 32-54 643819 32-54 640433 32-54 644463 32-44 32-54 643820 32-54 640434 32-54 6444641 32-44 32-54 643821 32-54 640435 32-54 -- -- 644878 32-54 640477 32-54 -- -- -- -- 640478 32-54 -- -- 644783 32-54 640479 32-54 6447911 32-44 -- -- 640480 32-54 -- -- -- -- 640481 32-54 -- -- 32-42 641222 32-54 -- -- 32-42 641223 32-54 -- Tape Mounted on Reel UL94V-2, Tin Plated 18 AWG 640472 32-54 0.8-0.9 mm2 20 AWG 640473 32-54 0.5-0.6 mm2 22 AWG 640474 32-54 0.3-0.4 mm2 24 AWG 640475 32-54 0.2 mm2 26 AWG 640476 32-54 0.12-0.15 mm2 Standard UL94V-2, .000030 [0.00076] Gold Plated 1 18 AWG 641217 32-54 644460 0.8-0.9 mm2 20 AWG 641218 32-54 6446631 0.5-0.6 mm2 22 AWG 641219 32-54 6446621 0.3-0.4 mm2 24 AWG 641220 32-54 -- 0.2 mm2 26 AWG 641221 32-54 -- 0.12-0.15 mm2 Standard UL94V-2, .000015 [0.00038] Gold Plated 1 18 AWG 641148 32-54 644284 0.8-0.9 mm2 20 AWG 641149 32-54 -- 0.5-0.6 mm2 22 AWG 641150 32-54 6474781 0.3-0.4 mm2 24 AWG 641151 32-54 -- 0.2 mm2 26 AWG 641152 32-54 -- 0.12-0.15 mm2 Standard UL94V-0, Tin Plated (Black in color) 1 18 AWG 32-42 644860 0.8-0.9 mm2 22 AWG -- -- 0.3-0.4 mm2 1 Closed End without Locking Ramp Without Tabs With Tabs -- -- -- 1 32-42 641224 32-54 644687 -- 641225 32-54 -- -- -- 641226 32-54 -- -- 32-42 641153 32-54 -- -- -- 641154 32-54 -- -- 32-42 641155 32-54 -- -- -- 641156 32-54 -- -- -- 641157 32-54 -- -- -- 6445021 32-42 6440821 32-42 -- 1 32-42 1 32-42 644501 MTA-156 .156 [3.96] Prefixes and suffixes are determined by the number of circuit positions in the connector. For example, the complete part number for a 10-position closed end connector with locking ramp and without polarizing tabs for 18 AWG wire would be: Closed End with Locking Ramp Without Tabs With Tabs 644566 32-44 Other circuit sizes are available upon request. Minimums may apply. Note: Blocked circuit configurations are available upon request. Contact product engineer or product manager for details. Minimums may apply. Note: All RoHS equivalent part numbers may not be available upon catalog release. If the number you need is not available, please contact Product Engineering to expedite your request. 37 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors MTA-156 IDC Connectors--Feed-Thru Material and Finish Feed-Thru with Locking Ramp Housing -- UL94V-2 rated, nylon, see below for color; or UL94V-0 rated, nylon, black Contacts -- Phosphor bronze; post tin plated, .000030 [.00076] or .000015 [.00038] post gold plated over nickel .245 [6.22] A .100 [2.54] .097 [2.46] .385 .325 [9.78] [8.26] .050 [1.27] .725 [18.42] Color Coding by Wire Size for UL94V-2 Connectors 26 AWG -- Blue 24 AWG -- White 22 AWG -- Red 20 AWG -- Yellow 18 AWG -- Orange MTA-156 .156 [3.96] .230 [5.84] without Polarizing Tabs .100 [2.54] .258 [6.56] All Wire Sizes in UL94V-0 -- Black Notes: 1. Only connectors with locking ramp and without polarizing tabs mate with posted connectors on page 45. 2. Refer to pages 70 thru 74 for approved wire listing. 3. For strain reliefs and dust covers, see pages 40 and 41. 4. For keying plugs and panel mount end caps, see page 42. 5. Other circuit sizes are available upon request. Minimums may apply. 6. Connector circuits can be molded closed for keying purposes. Minimums may apply. 7. Where no part numbers appear in the chart, parts can be made available upon request. Minimums may apply. 8. To determine connector overall length (Dim. A), multiply .156 x the number of circuits. Example: .156 x 10 circuits equals 1.560 inches [39.62 mm]. .156 Typ. [3.96] .050 [1.27] with Polarizing Tabs For mateability options, see matrix on pages 34 and 35. Mating half visuals for Feed-Thru Connectors with Locking Ramp, see pages 45 thru 48, 50, 52, and 53, (49 and 51 Front Bend Headers Only). Feed-Thru without Locking Ramp .245 [6.22] A .047 [1.19] .325 .385 [9.78] [8.26] .180 [4.57] .050 [1.27] .725 [18.42] .156 Typ. [3.96] without Polarizing Tabs .100 [2.54] .258 [6.56] .050 [1.27] with Polarizing Tabs For mateability options, see matrix on pages 34 and 35. Mating half visuals for Feed-Thru Connectors without Locking Ramp, see pages 46 thru 53. 38 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors MTA-156 IDC Connectors--Feed-Thru (Continued) Connector Ordering Information Base Part Numbers The "Base Part Numbers" Chart at right shows the base part number and number of circuits available for the described connectors. Base number 640599 plus prefix-and-suffix 4- -- -0 The correct ordering number is 4-640599-0 The part numbers in bold face are the RoHS equivalent version. Example: No. of Pos. 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 Lead Free RoHS Prefix/Suffix 3-640599-2 3-640599-3 3-640599-4 3-640599-5 3-640599-6 3-640599-7 3-640599-8 3-640599-9 4-640599-0 4-640599-1 4-640599-2 4-640599-3 4-640599-4 4-640599-5 4-640599-6 4-640599-7 4-640599-8 4-640599-9 5-640599-0 5-640599-1 5-640599-2 5-640599-3 5-640599-4 Connector Type & Wire Size Connector Part Nos. Standard UL94V-2, Tin Plated 18 AWG 640599 0.8-0.9 mm2 20 AWG 640600 0.5-0.6 mm2 22 AWG 640601 0.3-0.4 mm2 24 AWG 640602 0.2 mm2 26 AWG 640595 0.12-0.15 mm2 Connector RoHS Equiv. 32-54 32-54 32-54 1 644465 1 644466 1 644467 1 32-44 32-44 32-44 Connector Part Nos. RoHS Equiv. Part Nos. 640604 32-54 644469 1 32-44 644470 1 32-44 644471 1 32-44 1 32-44 640605 640606 32-54 32-54 RoHS Equiv. 644468 32-44 640607 32-54 644472 32-54 -- -- 640608 32-54 -- -- -- -- 641306 32-54 -- -- -- -- 641307 32-54 -- -- -- -- 641308 32-54 -- -- -- -- 641309 32-54 -- -- -- -- 641310 32-54 -- -- 644718 32-44 641232 32-54 -- -- -- -- 641233 32-54 -- -- 644720 32-44 641234 32-54 -- -- -- -- 641235 32-54 -- -- -- -- 641236 32-54 -- -- 647479 32-42 641173 32-54 -- -- -- -- 641174 32-54 -- -- 647496 32-42 641175 32-54 -- -- -- -- 641176 32-54 -- -- -- -- 641177 32-54 -- -- -- -- 644567 1 32-42 644570 Standard UL94V-2, .00003 [.00076] Gold Plated 18 AWG 641227 32-54 0.8-0.9 mm2 20 AWG 641228 32-54 0.5-0.6 mm2 22 AWG 641229 32-54 0.3-0.4 mm2 24 AWG 641230 32-54 0.2 mm2 26 AWG 641231 32-54 0.12-0.15 mm2 Standard UL94V-2, .000015 [.00038] Gold Plated 18 AWG 641168 32-54 0.8-0.9 mm2 20 AWG 641169 32-54 0.5-0.6 mm2 22 AWG 641170 32-54 0.3-0.4 mm2 24 AWG 641171 32-54 0.2 mm2 26 AWG 641172 32-54 0.12-0.15 mm2 1 Connector Part RoHS Nos. Equiv. 32-54 Tape Mounted on Reel UL94V-2, Tin Plated 18 AWG 641302 32-54 0.8-0.9 mm2 20 AWG 641303 32-54 0.5-0.6 mm2 22 AWG 641304 32-54 0.3-0.4 mm2 24 AWG 641305 32-54 0.2 mm2 26 AWG 641301 32-54 0.12-0.15 mm2 Standard UL94V-0, Tin Plated 18 AWG -- 0.8-0.9 mm2 22 AWG -- 0.3-0.4 mm2 Feed-Thru without Locking Ramp Without Tabs With Tabs -- -- 1 1 1 1 -- -- 1 644569 32-42 1 32-42 1 32-42 644572 MTA-156 .156 [3.96] Prefixes and suffixes are determined by the number of circuit positions in the connector. For example, the complete part number for a 10-position feed-thru connector with locking ramp and without polarizing tabs for 18 AWG wire would be: Feed-Thru with Locking Ramp Without Tabs With Tabs Other circuit sizes are available upon request. Minimums may apply. Note: Blocked circuit configurations are available upon request. Contact product engineer or product manager for details. Minimums may apply. Note: All RoHS equivalent part numbers may not be available upon catalog release. If the number you need is not available, please contact Product Engineering to expedite your request. 39 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors MTA-156 Connector Accessories Closed End Covers Strain Relief Covers Dust Covers Retention Dimple .335 [8.51] Material (RoHS Compliant) .440 [11.18] Strain Relief Covers -- UL94V-2 rated, nylon, white Dust Covers -- UL94V-0 rated, polyester, white .440 [11.18] .335 [8.51] .127 [3.23] .105 [2.67] .130 [3.30] A A MTA-156 .156 [3.96] Base Part Numbers Closed End Strain Relief Dust Covers Covers Cover No. of Cover No. of Part Nos. Circuits Part Nos. Circuits 643067 2-24 640551 2-24 Note: This portion of front locking bar may or may not be present Feed-Thru Covers Strain Relief Covers Dust Covers Retention Dimple Material (RoHS Compliant) .470 [11.94] Strain Relief Covers -- UL94V-2 rated, nylon, white Dust Covers -- UL94V-0 rated, polyester, white .475 [12.07] .325 [8.26] .127 [3.23] .130 [3.3] A A Base Part Numbers Note: This portion of front locking bar may or may not be present Cover Ordering Information The "Base Part Numbers" Chart at right shows the base part number and number of circuits available for the described cover. Prefixes and suffixes are determined by the number of circuit positions in the cover. For example, the complete part number for a 10-position closed-end strain relief cover would be: Base number 643067 plus Feed-Thru Strain Relief Dust Covers Covers Cover No. of Cover No. of Part Nos. Circuits Part Nos. Circuits 643071 2-24 640643 2-24 Cover Length No. of Circuits 2 3 4 5 prefix-and-suffix 6 1- -- -0 7 The correct ordering number is 8 1-643067-0 9 Dim. A .312 7.92 .468 11.89 .624 15.85 .780 19.81 .936 23.77 1.092 27.74 1.248 31.7 1.404 35.66 Prefix/ Suffix No. of Circuits -2 10 -3 11 -4 12 -5 13 -6 14 -7 15 -8 16 -9 17 Dim. A 1.560 39.62 1.716 43.59 1.872 47.55 2.028 51.51 2.184 55.47 2.340 59.44 2.496 63.4 2.652 67.36 Prefix/ Suffix No. of Circuits 1- -0 18 1- -1 19 1- -2 20 1- -3 21 1- -4 22 1- -5 23 1- -6 24 Dim. A 2.808 71.32 2.964 75.29 3.120 79.25 3.276 83.21 3.432 87.17 3.588 91.14 3.744 95.1 Prefix/ Suffix 1- -8 1- -9 2- -0 2- -1 2- -2 2- -3 2- -4 1- -7 40 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors MTA-156 Connector Accessories (Continued) Replacement IDC Contacts .125 [3.18] Wire Size AWG mm2 Material and Finish Contacts -- Phosphor bronze, post tin plated; .000030 [0.00076] or .000015 [0.00038] post gold plated over nickel .637 [16.18] 18 20 22 24 26 Note: Tyco Electronics does not recommend terminating an MTA contact more than one time. Use replacement contacts when required for field repairs or wire changes. 0.8-0.9 0.5-0.6 0.3-0.4 0.2 0.12-0.15 Tin Plated 640631-3 640632-3 640633-3 640634-3 640635-3 Part Numbers .000030 [0.00076] Gold Plated 641143-4 641144-4 641145-4 641146-4 641147-4 .000015 [0.00038] Gold Plated 641143-3 641144-3 641145-3 641146-3 641147-3 MTA-156 .156 [3.96] Crimp Snap-in Contacts Wire Size AWG mm2 26-22 .12-0.3 22-18 0.3-0.9 .580 [14.73] Material and Finish Contacts -- Phosphor bronze, tin plated .105 [2.67] .110 [2.79] .165 Max. [4.19] Part Nos. Loose Piece* 640557-3 640559-3 Strip** 640556-3 640558-3 **Hand Tool No. 59837-1 (408-6528) **AMP-O-LECTRIC Model "G" Termination Machine (Request Catalog 65828) Note: Requires applicator. For part number, call Technical Support. Special applications for crimp snap-in contacts are: 1. Double wire per contact 2. Coax or shielded wire 3. Mixed wire size in same connector Note: Only one crimp snap-in contact per connector. 41 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors MTA-156 Connector Accessories (Continued) Keying Plugs Material (RoHS Compliant) Loose Piece Part No. 640629-1 (Flush) Used with keyed headers UL94V-2 rated, nylon, natural color Note: Removal of contact is not necessary when using keying plug. On Carrier Strip Part No. 641623-1 (Flush) (10 per strip) .300 [7.62] .066 [1.68] .500 [12.70] Ref. .065 [1.65] .051 [1.30] .085 [2.16] Flush 2.525 [64.14] Ref. MTA-156 .156 [3.96] Part No. 640630-1 (Long Nose) Used with staked post .300 [7.62] .375 [9.52] .051 [1.30] .300 [7.62] Ref. .065 [1.65] .125 [3.18] .066 [1.68] Long Nose .070 Dia. [1.78] Panel Mount End Caps Part No. 641440-1 Part No. 641533-1 (2-position only) Material (RoHS Compliant) Notes: 1. Both left-hand and right-hand end caps are attached by a connecting tab. This tab must be broken off prior to installing on connector. 2. For best results attach panel mount end caps to the MTA-156 (IDC) connectors shown on pages 36 thru 39. While not preferred, panel mount end caps can be attached to MTA-156 (IDC) posted connector on page 45. No. of Pos. 3 4 6 9 12 15 24 .564 [14.33] .550 .410 [13.97] [10.41] UL94V-2 rated, nylon, black Dim. A .736 18.69 .892 22.66 1.204 30.58 1.672 42.47 2.140 54.36 2.608 66.24 4.012 101.9 .440 [11.18] .520 [13.2] .440 [11.18] .520 [13.2] Two-Position Only 641533-1 3- thru 24-Position 641440-1 See Note 1 .578 [14.7] A .453 [11.5] .010 [.254] Max. R. Typ. at Min. Tolerance Cutout .010 [.254] Max. R. Typ. at Min. Tolerance Cutout .453 [11.5] Recommended Panel Cutout (Recommended Panel Thickness .062 [1.57] to .067 [1.70] max.) 42 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 6414 35 6414 36 6414 37 6414 38 6414 39 6415 22 6415 23 6415 24 6415 25 6415 26 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors MTA-156 Posted Connector/Connector Mateability Guide Matrix for Tin Plated Part Numbers Connectors Y Y Y Y Y N N N N N Y Y Y Y Y N N N N Y Y Y Y Y N N N N N Y Y Y Y Y N N N N Y Y Y Y Y N N N N N Y Y Y Y Y N N N N Y Y Y Y Y N N N N N Y Y Y Y Y N N N N Y Y Y Y Y N N N N N Y Y Y Y Y N N N N Y Y Y Y Y N N N N N Y Y Y Y Y N N N N Y Y Y Y Y N N N N N Y Y Y Y Y N N N N Y Y Y Y Y N N N N N Y Y Y Y Y N N N N Y Y Y Y Y N N N N N Y Y Y Y Y N N N N Y Y Y Y Y N N N N N Y Y Y Y Y N N N N 640481 640595 640599 640600 640601 640602 640604 640605 640606 640607 640608 641301 641302 641303 641304 641305 641306 641307 641308 641309 641310 643817 643818 643819 643820 643821 644082 644461 644462 644463 644464 644465 644466 644467 644468 644469 644470 644471 644472 644501 644502 644566 644567 644569 644570 644572 644783 644791 644860 644878 N Y Y Y Y Y N N N N N Y Y Y Y Y N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N Y N N Y Y Y Y Y N N N N N Y Y Y Y Y N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N Y N N Y Y Y Y Y N N N N N Y Y Y Y Y N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N Y N N Y Y Y Y Y N N N N N Y Y Y Y Y N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N Y N N Y Y Y Y Y N N N N N Y Y Y Y Y N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N Y N N Y Y Y Y Y N N N N N Y Y Y Y Y N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N Y N N Y Y Y Y Y N N N N N Y Y Y Y Y N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N Y N N Y Y Y Y Y N N N N N Y Y Y Y Y N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N Y N N Y Y Y Y Y N N N N N Y Y Y Y Y N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N Y N N Y Y Y Y Y N N N N N Y Y Y Y Y N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N Y N MTA-156 .156 [3.96] This matrix has been prepared to assist you, our customer, in defining the correct mating halves for the MTA-156 posted connector and connector combination. Where a "Y" is indicated the combination is a valid mating pair. Where an "N" is indicated the combination is not acceptable for mating. 640426 640427 640428 640429 640430 640431 640432 640433 640434 640435 640472 640473 640474 640475 640476 640477 640478 640479 640480 Posted Connectors 43 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors MTA-156 Posted Connector/Connector Mateability Guide (Continued) This matrix has been prepared to assist you, our customer, in defining the correct mating halves for the MTA-156 posted connector and connector combination. Where a "Y" is indicated the combination is a valid mating pair. Where an "N" is indicated the combination is not acceptable for mating. Matrix for .000030 [0.00076] Gold Plated Part Numbers Connectors MTA-156 .156 [3.96] 6448 07 6448 09 6448 12 6448 14 Posted Connectors 641217 641218 641219 641220 641221 641222 641223 641224 641225 641226 641227 641228 641229 641230 641231 641232 641233 641234 641235 641236 644460 644662 644663 644687 644718 644720 Y Y Y Y Y N N N N N Y Y Y Y Y N N N N N N N N N N N Y Y Y Y Y N N N N N Y Y Y Y Y N N N N N N N N N N N Y Y Y Y Y N N N N N Y Y Y Y Y N N N N N N N N N N N Y Y Y Y Y N N N N N Y Y Y Y Y N N N N N N N N N N N Posted Connectors Connectors 6439 95 6474 76 6474 81 6474 97 Matrix for .000015 [0.00038] Gold Plated Part Numbers 641148 641149 641150 Y Y Y Y Y Y Y Y Y Y Y Y 641151 641152 641153 641154 641155 641156 641157 641168 641169 641170 641171 641172 641173 641174 641175 641176 641177 644284 647478 647479 647496 Y Y N N N N N Y Y Y Y Y N N N N N N N N N Y Y N N N N N Y Y Y Y Y N N N N N N N N N Y Y N N N N N Y Y Y Y Y N N N N N N N N N Y Y N N N N N Y Y Y Y Y N N N N N N N N N 44 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors MTA-156 IDC Posted Connectors (Wire-to-Wire)--Closed End, Feed-Thru Material and Finish Closed End 4 Housing -- UL 94V-2 rated, nylon, see chart for color Contacts -- Copper alloy, post tin or .000030 [.00076] gold plated over nickel Feed-Thru 3 B Dim. 1 2 B Dim. A Dim. .105 [2.67] .010 [ 0.25 ] 1.010 [25.65] A Dim. .105 [2.67] .010 [ 0.25 ] 1.010 [25.65] .156 [3.96] .156 [3.96] .487 .355 [12.37] [9.02] Ref. .370 [9.4] .487 .385 [12.37] [9.78] Ref. .370 [9.4] MTA-156 .156 [3.96] .045 [1.14] Sq. .045 [1.14] Sq. Base Part Numbers Notes: 1. Mating half visuals - pages 36 thru 39. 2. Strain relief & dust covers - pages 40 & 41. 3. Approved wire listing - page 70. Connector Ordering Information The "Base Part Numbers" Chart at right shows the base part number and number of circuits available for the described connectors. Prefixes and suffixes are determined by the number of circuit positions in the connector. For example, the complete part number for a 12-position closed end connector for 18 AWG wire would be: Base number 641435 plus prefix-and-suffix 4- -- -2 The correct ordering number is 4-641435-2 See page 15 for an explanation of RoHS lead free equivalents. Note: All RoHS equivalent part numbers may not be available upon catalog release. If the number you need is not available, please contact Product Engineering to expedite your request. Closed End Connector1 Connector Type & Wire Size Standard UL 94V-2, Tin Plated 18 AWG 0.8-0.9 mm2 20 AWG 0.5-0.6 mm2 22 AWG 0.3-0.4 mm2 24 AWG 0.2 mm2 26 AWG 0.12-0.15 mm2 1 Part Nos. RoHS Equiv. 641435 32, 33, 34, 36, 39, 42, 45, 54 641522 32, 33, 34, 36, 39, 42, 45, 54 641436 32, 33, 34, 36, 39, 42, 45, 54 641523 32, 33, 34, 36, 39, 42, 45, 54 641437 32, 33, 34, 36, 39, 42, 45, 54 641524 32, 33, 34, 36, 39, 42, 45, 54 641438 32, 33, 34, 36, 39, 42, 45, 54 641525 32, 33, 34, 36, 39, 42, 45, 54 641439 32, 33, 34, 36, 39, 42, 45, 54 641526 32, 33, 34, 36, 39, 42, 45, 54 644812 32, 33, 34, 36, 39, 42, 45, 54 -- -- 2 644814 32, 33, 34, 36, 39, 42, 45, 54 --2 -- --2 -- 647481 32, 33, 34, 36, 39, 42, 45, 54 647497 32, 33, 34, 36, 39, 42, 45, 54 MTA-156 Posted Connectors (Closed End and Feed-Thru) will Only mate with MTA-156 connectors with locking ramp and without polarizing tabs. They will NOT mate with MTA-156 Quad Connectors. Parts can be made available upon request. Minimums may apply. 2 3 4 6 Voltage Rating -- 600 VAC Current Rating -- 7 amp max. Low-Level Resistance -- 7 m max. initial Dielectric Withstanding Voltage -- 1500 VAC/1 min. Insulation Resistance -- 5000 M min. initial Operating Temperature -- -55 C to 105 C RoHS Equiv. Standard UL 94V-2, .000015 [0.00038] Gold Plated 18 AWG 647476 32, 33, 34, 36, 39, 42, 45, 54 0.8-0.9 mm2 22 AWG 643995 32, 33, 34, 36, 39, 42, 45, 54 0.3-0.4 mm2 No. of Circuits Performance Data Part Nos. Standard UL 94V-2, .000030 [0.00076] Gold Plated 18 AWG 644807 32, 33, 34, 36, 39, 42, 45, 54 0.8-0.9 mm2 20 AWG 2 -- -- 0.5-0.6 mm2 22 AWG 644809 32, 33, 34, 36, 39, 42, 45, 54 0.3-0.4 mm2 24 AWG --2 -- 0.2 mm2 26 AWG --2 -- 0.12-0.15 mm2 2 Color Coding by Wire Size for UL 94V-2 Connectors 18 AWG --Orange 20 AWG -- Yellow 22 AWG -- Red 24 AWG -- White 26 AWG -- Blue Feed-Thru Connector1 Dim. A .468 11.89 .624 15.85 .780 19.81 1.092 27.74 -2 9 -3 12 -4 15 -6 24 Technical Documents Replacement IDC Contacts Product Specification 108-1065 MTA-156 Posted Connector Material and Finish Application Specification 114-1020 MTA-156 Connectors, Posted Connectors and Card Edge Connectors Dim. No. of Circuits Suffix B .316 8.03 .472 11.99 .628 15.95 .940 23.88 A 1.560 39.62 2.028 51.51 2.496 63.40 3.900 99.06 Contacts -- Copper alloy, post tin .126 plated over nickel [3.20] .045 [1.14] Sq. .840 [21.34] .100 [2.54] B 1.408 35.76 1.876 47.65 2.344 59.54 3.748 95.20 AWG 18 20 22 24 26 Wire Size mm2 0.8-0.9 0.5-0.6 0.3-0.4 0.2 0.12-0.15 Prefix/ Suffix -9 1- -2 1- -5 2- -4 Part Numbers 3-641425-1 3-641426-1 3-641427-1 3-641428-1 3-641429-1 45 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors MTA-156 Flat Headers--Straight Material and Finish Housing -- UL94V-0 rated, polyester, white Posts -- Copper alloy, tin plated, .000030 [0.00076] or .000015 [0.00038] gold over nickel .250 [6.35] .125 [3.18] A MTA-156 .156 [3.96] Notes: 1. Post(s) can be omitted for keying purposes. Specify the desired post(s) to be omitted using the figure to identify Post No. 1. 2. Gold headers are duplex plated, gold on mating end of post and tin on the solder tail. 3. .125 [3.18] solder tail lengths are for .062 [1.57] thick printed circuit boards and .175 [4.45] solder tail lengths are for .093-.125 [2.363.18] thick printed circuit boards. 4. To determine header overall length (Dim. A), multiply .156 x the number of posts. Example: .156 x 10 posts equals 1.560 inches [39.62 mm]. .156 [3.96] Typ. .045 [1.14] .078 [1.98] Typ. Post No. 1 .125 [3.18] .140 Min. [3.56] Solder tail Length (See Chart) Edge of Board For mateability options, see matrix on pages 34, 35, 54 and 58. For mating half visuals, see pages 36 thru 39, 55, 60 and 62. Recommended Mounting Hole Pattern for .062 [1.57] Thk. PC Board The "Base Part Numbers" Chart at right shows the base part number and number of posts available for the described headers. Prefixes and suffixes are determined by the number of post positions in the header. For example, the complete part number for a 10-position header with square posts and a .125 [3.18] solder tail length would be: Base number 640383 plus prefix-and-suffix 4- -- -0 The correct ordering number is 4-640383-0 The part numbers in bold face are the RoHS equivalent version. Example: 2 24 PC Board Hole Diameters Square Round Post Post .080/.070 .070/.060 [2.03/1.78] [1.78/1.52] .156 [3.96] Header Ordering Information No. of Pos. .450 Ref. [11.43] Note: Consult Product Drawing for details on placing headers onto PC boards. Base Part Numbers Square Posts .125 [3.18] .175 [4.45] Solder tail Solder tail Header RoHS Header RoHS Part Nos. Equiv. Part Nos. Equiv. Standard UL94V-0, Tin Plated 640383 2-24 Round Posts .125 [3.18] Solder tail Header RoHS Part Nos. Equiv. .175 [4.45] Solder tail Header RoHS Part Nos. Equiv. 2-24 640384 2-24 644750 2-24 Standard UL94V-0, .000030 [0.00076] Gold Plated 641202 32-54 644756 32-54 641203 32-54 644757 32-54 Standard UL94V-0, .000015 [0.00038] Gold Plated 641113 32-54 644763 32-54 641114 32-54 644764 32-54 644749 Lead Free RoHS Prefix/Suffix 3-640383-2 thru 5-640383-4 See page 15 for an explanation of RoHS lead free equivalents. Note: All RoHS equivalent part numbers may not be available upon catalog release. If the number you need is not available, please contact Product Engineering to expedite your request. Note: Select load headers (omitted pin headers) are available upon request. Please contact product engineer or product manager for details. 46 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors MTA-156 Flat Headers--Right-Angle Material and Finish Housing -- UL94V-0 rated, polyester, white Posts -- Copper alloy, tin plated, .000030 [0.00076] or .000015 [0.00038] gold over nickel Post No. 1 .125 [3.18] .125 [3.18] .390 [9.91] Solder tail Length (See Chart) Edge of Board .390 .015 [9.91 0.38] X .156 [3.96] .080/.070 [2.03/1.78] .125 [3.18] The "Base Part Numbers" Chart at right shows the base part number and number of posts available for the described headers. Prefixes and suffixes are determined by the number of post positions in the header. For example, the complete part number for a 10-position header with square posts and a .125 [3.18] solder tail length would be: Base number 641204 plus prefix-and-suffix 4- -- -0 The correct ordering number is 4-641204-0 The part numbers in bold face are the RoHS equivalent version. Example: 24 .100 [2.54] A Recommended Mounting Hole Pattern for .062 [1.57] Thk. PC Board Header Ordering Information 2 .250 [6.35] A For mateability options, see matrix on pages 34, 35, 54 and 58. For mating half visuals, see pages 36 thru 39, 55, 60 and 62. No. of Pos. .078 [1.98] Typ. MTA-156 .156 [3.96] Notes: 1. Post(s) can be omitted for keying purposes. Specify the desired post(s) to be omitted using the figure to identify Post No. 1. 2. Gold headers are duplex plated, gold on mating end of post and tin on the solder tail. 3. .125 [3.18] solder tail lengths are for .062 [1.57] thick printed circuit boards and .175 [4.45] solder tail lengths are for .093-.125 [2.363.18] thick printed circuit boards. 4. To determine header overall length (Dim. A), multiply .156 x the number of posts. Example: .156 x 10 posts equals 1.560 inches [39.62 mm]. .156 [3.96] Typ. .045 [1.14] Sq. Lead Free RoHS Prefix/Suffix 3-641204-2 thru 5-641204-4 X = .140 [3.56] Min., .430 [10.92] Max. when mated with MTA Connector. 16 Retentive Leg Edge of Board X = .140 [3.56] Min. when mated with SL-156 Wire-to-Board Connector. Y .156 Typ. [3.96] Note: Consult Product Drawing for details on placing headers onto PC boards. O .063 .002 Typ. [1.60 0.05] Recommended Mounting Hole Pattern for .063 [1.60] Thk. PC Board for Retentive Leg Header Y = .140 [3.56] Min., .430 [10.92] Max. when mated with MTA Connector. Base Part Numbers Retentive Leg Header RoHS Part Nos. Equiv. Square Posts .125 [3.18] Solder tail Header RoHS Part Nos. Equiv. Standard UL94V-0, Tin Plated 647646 2-12 .175 [4.45] Solder tail Header RoHS Part Nos. Equiv. 640385 2-24 644751 2-24 Standard UL94V-0, .000030 [0.00076] Gold Plated -- -- 641204 32-54 644758 32-54 Standard UL94V-0, .000015 [0.00038] Gold Plated -- -- 641115 32-54 644765 32-54 See page 15 for an explanation of RoHS lead free equivalents. Note: All RoHS equivalent part numbers may not be available upon catalog release. If the number you need is not available, please contact Product Engineering to expedite your request. Note: Select load headers (omitted pin headers) are available upon request. Please contact product engineer or product manager for details. 47 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors MTA-156 Friction Lock Headers--Straight .180 [4.57] Material and Finish Housing -- UL94V-0 rated, polyester, white Posts -- Copper alloy, tin plated, .000030 [0.00076] or .000015 [0.00038] gold over nickel MTA-156 .156 [3.96] Notes: 1. Post(s) can be omitted for keying purposes. Specify the desired post(s) to be omitted using the figure to identify Post No. 1. 2. Gold headers are duplex plated, gold on mating end of post and tin on the solder tail. 3. .125 [3.18] solder tail lengths are for .062 [1.57] thick printed circuit boards and .175 [4.45] solder tail lengths are for .093-.125 [2.363.18] thick printed circuit boards. 4. To determine header overall length (Dim. A), multiply .156 x the number of posts. Example: .156 x 10 posts equals 1.560 inches [39.62 mm]. For mateability options, see matrix on pages 34, 35, 54 and 58. For mating half visuals, use connectors with a locking ramp for polarization/retention purposes, see pages 36 thru 39, 55, 60 and 62. For polarizing purposes only use connectors without a locking ramp. See pages 36 thru 39, 55, 60 and 62. Header Ordering Information The "Base Part Numbers" Chart at right shows the base part number and number of posts available for the described headers. Prefixes and suffixes are determined by the number of post positions in the header. For example, the complete part number for a 10-position header with square posts and a .125 [3.18] solder tail length would be: Base number 641208 plus prefix-and-suffix 4- -- -0 The correct ordering number is 4-641208-0 The part numbers in bold face are the RoHS equivalent version. Example: No. of Pos. Standard Prefix/Suffix 2 641208-2 thru 2-641208-4 24 .300 [7.62] A .045 [1.14] .156 Typ. [3.96] Y .078 Typ. [1.98] Post No. 1 .450 Ref. [11.43] .425 [10.8] .125 [3.18] .175 Min. [4.45] Y = .073 [1.85] 9-24 position tin plated headers. Solder tail Length (See Chart) Edge of Board Y = .068 [1.73] Max. 2-8 position tin plated and 2-24 position gold plated headers. .068 [1.7] .156 [3.96] .400 [10.16] Recommended Mounting Hole Pattern for .062 [1.57] Thk. PC Board PC Board Hole Diameters Square Round Post Post .080/.070 .070/.060 [2.03/1.78] [1.78/1.52] 16 3 Retentive Leg Note: Consult Product Drawing for details on placing headers onto PC boards. Base Part Numbers Retentive Leg Header RoHS Part Nos. Equiv. Square Posts .125 [3.18] Solder tail Header RoHS Part Nos. Equiv. Standard UL94V-0, Tin Plated 1744017 2-12 640445 2-24 .175 [4.45] Solder tail Header RoHS Part Nos. Equiv. Round Posts .125 [3.18] .175 [4.45] Solder tail Solder tail Header RoHS Header RoHS Part Nos. Equiv. Part Nos. Equiv. 644752 2-24 640388 2-24 644753 2-24 Standard UL94V-0, .000030 [0.00076] Gold Plated -- -- 641208 32-54 644759 32-54 641209 32-54 644760 32-54 Standard UL94V-0, .000015 [0.00038] Gold Plated -- -- 641119 32-54 644766 32-54 641120 32-54 644767 32-54 Lead Free RoHS Prefix/Suffix 3-641208-2 5-641208-4 See page 15 for an explanation of RoHS lead free equivalents. Note: All RoHS equivalent part numbers may not be available upon catalog release. If the number you need is not available, please contact Product Engineering to expedite your request. Note: Select load headers (omitted pin headers) and tube loaded product are available upon request. Please contact product engineer or product manager for details. 48 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors MTA-156 Friction Lock Headers--Right-Angle Material and Finish Housing -- UL94V-0 rated, polyester, white Posts -- Copper alloy, tin plated, .000030 [0.00076] or .000015 [0.00038] gold over nickel .180 [4.57] .300 [7.62] Y = .068 [1.73] Max. 2-8 position tin plated and 2-24 position gold plated headers. Notes: For mateability options, see matrix on pages 34, 35, 54 and 58. When using Front Bend Headers -- for mating half visuals use connectors with a locking ramp for polarization/ retention purposes. When using Rear Bend Headers -- for mating half visuals use connectors without a locking ramp. For polarization purposes only see pages 36 thru 39, 55, 60 and 62. Header Ordering Information The "Base Part Numbers" Chart at right shows the base part number and number of posts available for the described headers. Prefixes and suffixes are determined by the number of post positions in the header. For example, the complete part number for a 10-position header with square posts, front bend, and a .125 [3.18] solder tail length would be: Base number 641210 plus prefix-and-suffix 4- -- -0 The correct ordering number is 4-641210-0 The part numbers in bold face are the RoHS equivalent version. Example: No. of Pos. Standard Prefix/Suffix 2 641210-2 thru 2-641210-4 24 Lead Free RoHS Prefix/Suffix 3-641210-2 5-641210-4 See page 15 for an explanation of RoHS lead free equivalents. Y = .073 [1.85] 9-24 position tin plated headers. A .156 Typ. [3.96] .045 [1.14] Sq. Y Y .078 [1.98] Typ. Post No. 1 .450 [11.43] .425 [10.8] .425 [10.8] .157 [3.99] .125 [3.18] .212 [5.38] Edge of Board Solder tail Length (See Chart) X .156 [3.96] MTA-156 .156 [3.96] 1. Post(s) can be omitted for keying purposes. Specify the desired post(s) to be omitted using the figure to identify Post No. 1. 2. Gold headers are duplex plated, gold on mating end of post and tin on the solder tail. 3. .125 [3.18] solder tail lengths are for .062 [1.57] thick printed circuit boards and .175 [4.45] solder tail lengths are for .093-.125 [2.36-3.18] thick printed circuit boards. 4. To determine header overall length (Dim. A), multiply .156 x the number of posts. Example: .156 x 10 posts equals 1.560 inches [39.62 mm]. Rear Bend Front Bend X = .325 [8.26] Min., .400 [10.16] Max., when mated with MTA Connector. .080/.070 X = .325 [8.26] Min., .345 [8.76] [2.03/1.78] Max., when mated with SL-156 Connector. X = .500 [12.7] Min., .650 [16.51] Max., when mated with MTA Connector. X = .500 [12.7] Min., when mated with SL-156 Connector. Recommended Mounting Hole Pattern for .062 [1.57] Thk. PC Board Note: Consult Product Drawing for details on placing headers onto PC boards. Base Part Numbers Square Posts Front Bend .125 [3.18] Solder tail Header RoHS Part Nos. Equiv. Standard UL94V-0, Tin Plated 640389 2-24 Rear Bend .175 [4.45] Solder tail Header RoHS Part Nos. Equiv. .125 [3.18] Solder tail Header RoHS Part Nos. Equiv. .175 [4.45] Solder tail Header RoHS Part Nos. Equiv. 2-24 640387 2-24 644755 2-24 Standard UL94V-0, .000030 [0.00076] Gold Plated 641210 32-54 644761 32-54 641207 32-54 644762 32-54 Standard UL94V-0, .000015 [0.00038] Gold Plated 641121 32-54 644768 32-54 641118 32-54 644769 32-54 644754 Note: All RoHS equivalent part numbers may not be available upon catalog release. If the number you need is not available, please contact Product Engineering to expedite your request. Note: Select load headers (omitted pin headers) are available upon request. Please contact product engineer or product manager for details. 49 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors MTA-156 Polarized Lock Headers--Straight Material and Finish Housing -- UL94V-0 rated, polyester, white Posts -- Copper alloy, tin plated or .000030 [0.00076] gold over nickel .210 [5.33] 90 Ref. Typ. Retention Tabs 4 Plc. Notes: MTA-156 .156 [3.96] 1. Post(s) can be omitted for keying purposes. Specify the desired post(s) to be omitted using the figure to identify Post No. 1. 2. Peg holes are not required in PC Boards when headers without pegs are used. 3. One peg only on a 2 position header, other position sizes have two pegs. 4. Headers with .00015 [0.00038] gold plated post are available upon request. Minimums may apply. 5. To determine header overall length (Dim. A), multiply .156 x the number of posts. Example: .156 x 10 posts equals 1.560 inches [39.62 mm]. Post No. 1 .125 [3.18] .125 [3.18] Polarized Retention Peg Peg Hole .066/.062 Dia. [1.68/1.57] Edge of Board Lead Free RoHS Prefix/Suffix 3-644615-2 thru 4-644615-8 See page 15 for an explanation of RoHS lead free equivalents. .545 [13.84] .167 [4.24] PC Board Hole Diameters Square Round Post Post .069/.065 .054/.050 [1.75/1.65] [1.37/1.27] .078 [1.98] .156 [3.96] .425 [10.80] .225 Min. [5.72] Recommended Mounting Hole Pattern for .062 [1.57] Thk. PC Board The "Base Part Numbers" Chart at right shows the base part number and number of posts available for the described headers. Prefixes and suffixes are determined by the number of post positions in the header. For example, the complete part number for a 10-position header with square posts with pegs would be: Base number 644615 plus prefix-and-suffix 4- -- -0 The correct ordering number is 4-644615-0 The part numbers in bold face are the RoHS equivalent version. Example: 18 .450 [11.43] .100 [2.54] Header Ordering Information 2 .073 [1.85] .045 [1.14] .076 [1.93] For mateability options, see matrix on pages 34, 35, 54 and 58. For mating half visuals, use connectors with a locking ramp for polarization/retention purposes, see pages 36 thru 39, 55, 60 and 62. For polarizing purposes only use connectors without a locking ramp. See pages 36 thru 39, 60 and 62. No. of Pos. Polarized Retention Peg A .156 [3.96] Typ. Note: Consult Product Drawing for details on placing headers onto PC boards. Base Part Numbers Square Posts Without Pegs With Pegs Header RoHS Header RoHS Part Nos. Equiv. Part Nos. Equiv. Standard UL94V-0, Tin Plated 644611 32-48 Round Posts Without Pegs Header RoHS Part Nos. Equiv. With Pegs Header RoHS Part Nos. Equiv. 32-48 644612 32-48 644616 32-48 Standard UL94V-0, .000030 [0.00076] Gold Plated 644627 32-48 644631 32-48 644628 32-48 644632 32-48 644615 Note: All RoHS equivalent part numbers may not be available upon catalog release. If the number you need is not available, please contact Product Engineering to expedite your request. Note: Select load headers (omitted pin headers) are available upon request. Please contact product engineer or product manager for details. 50 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors MTA-156 Polarized Lock Headers--Right-Angle Material and Finish Housing -- UL94V-0 rated, polyester, white Posts -- Copper alloy, tin plated or .000030 [0.00076] gold over nickel For mateability options, see matrix on pages 34, 35, 54 and 58. For mating half visuals, use only connectors with a locking ramp for polarization/retention purposes, see pages 36 thru 39, 55, 60 and 62. For polarizing purposes only use connectors without a locking ramp. See pages 36 thru 39, 60 and 62. Retention Tabs 4 Plc. Polarized Retention Peg A .156 Typ. [3.96] .076 [1.93] Typ. .100 [2.54] .073 [1.85] Typ. .210 [5.33] Typ. Ref. .045 Sq. [1.14] Post No. 1 .450 [11.43] .125 [3.18] .545 [13.84] .205 [5.21] Typ. .125 [3.18] .425 [10.80] Front Bend Front Bend Reg. Hole .066/.062 Dia. [1.68/1.57] Edge of Board x .069/.065 [1.75/1.65] .239 [6.07] .156 [3.96] X = .350 [8.89] Min., .825 [20.96] Max., when mated with MTA Connector. X = .350 [8.89] Min. when mated with SL-156 Connector. No. of Pos. 2 18 Lead Free RoHS Prefix/Suffix 3-644617-2 thru 4-644617-8 See page 15 for an explanation of RoHS lead free equivalents. .125 [3.18] RearRear Bend Bend X = .500 [12.7] Min., .700 [17.78] Max., when mated with MTA Connector. X = .500 [12.7] Min., when mated with SL-156 Connector. .078 [1.98] Note: Consult Product Drawing for details on placing headers onto PC boards. Recommended Mounting Hole Pattern for .062 [1.57] Thk. PC Board Header Ordering Information The "Base Part Numbers" Chart at right shows the base part number and number of posts available for the described headers. Prefixes and suffixes are determined by the number of post positions in the header. For example, the complete part number for a 10-position header with front bend and with pegs would be: Base number 644617 plus prefix-and-suffix 4- -- -0 The correct ordering number is 4-644617-0 The part numbers in bold face are the RoHS equivalent version. Example: .200 [5.08] Typ. MTA-156 .156 [3.96] Notes: 1. Post(s) can be omitted for keying purposes. Specify the desired post(s) to be omitted using the figure to identify Post No. 1. 2. Peg holes are not required in PC Boards when headers without pegs are used. 3. One peg only on a 2 position header, other position sizes have two pegs. 4. Headers with .00015 [0.00038] gold plated post are available upon request. Minimums may apply. 5. To determine header overall length (Dim. A), multiply .156 x the number of posts. Example: .156 x 10 posts equals 1.560 inches [39.62 mm]. 90 Ref. Typ. Base Part Numbers Square Posts Front Bend Without Pegs Header RoHS Part Nos. Equiv. With Pegs Header RoHS Part Nos. Equiv. Standard UL94V-0, Tin Plated 644613 32-48 Rear Bend Without Pegs Header RoHS Part Nos. Equiv. 644617 32-48 644614 32-48 Standard UL94V-0, .000030 [0.00076] Gold Plated 644629 32-48 644633 32-48 644630 32-48 Note: All RoHS equivalent part numbers may not be available upon catalog release. If the number you need is not available, please contact Product Engineering to expedite your request. Note: Select load headers (omitted pin headers) are available upon request. Please contact product engineer or product manager for details. 51 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors MTA-156 Friction Lock High Temperature Headers--Straight Material and Finish For use with Infrared Reflow Process Housing -- UL94V-0 rated, nylon, black Posts -- Copper alloy, tin plated, .000015 [0.00038] gold over nickel Temperature-- Maximum Temperature Rating: 280C A Notes: MTA-156 .156 [3.96] 1. Post(s) can be omitted for keying purposes. Specify the desired post(s) to be omitted using the figure to identify Post No. 1. 2. Gold headers are duplex plated, gold on mating end of post and tin-lead on the solder tail. 3. Headers with straight and right-angle square posts are available upon request. Minimums may apply. 4. To determine header overall length (Dim. A), multiply .156 x the number of posts. Example: .156 x 10 posts equals 1.560 inches [39.62 mm]. .156 Typ. [3.96] .076 .003 [1.93 0.08] 2 Plcs. Mating End Post No. 1 .700 .010 02 . 5 ] 7 1 [ 7 . 8 .125 [3.18] For mateability options, see matrix on pages 34, 35, 54 and 58. For mating half visuals, use connectors with a locking ramp for polarization/retention purposes, see pages 36 thru 39, 55, 60 and 62. For polarizing purposes only use connectors without a locking ramp. See pages 36 thru 39, 60 and 62. Solder tail 1 [ 5 .8 .450 Ref. [11.43] .545 .010 1 [ 843. .125 .010 02 . 5 ] 1 [3. 8 0.25 ] .335 [8.51] .425 [10.80] .156 [3.96]Typ. .120 [3.05]Typ. .008 [0.20] Min. Thick Solder Paste in Area Shown Position No. 1 Header Ordering Information .120 [3.05]Typ. The "Base Part Numbers" Chart at right shows the base part number and number of posts available for the described headers. Prefixes and suffixes are determined by the number of post positions in the header. For example, the complete part number for a 10-position header with round tin plated posts: Base number 647648 plus prefix-and-suffix 4- -- -0 The correct ordering number is 4-647648-0 The part numbers in bold face are the RoHS equivalent version. Example: 2 Lead Free RoHS Prefix/Suffix 3-647648-2 12 4-647648-2 No. of Pos. O .045 .001 Ref. [1.14 0.03] .005 .073 +- .010 p.yT +0.13 -02 . 5 ] .210 Ref. [5.33] p.Ty See page 15 for an explanation of RoHS lead free equivalents. .650 .010 [16.51 0.25] Solder Paste Area .057 .003 [1.45 0.08] Pretinned Plated Thru Hole Typ. .100 [2.54] Pretinned Land (Both Sides) Typ. .070 Typ. [1.78] Recommended Mounting Hole Pattern for .062 [1.57] Thick PC Board Note: Consult Product Drawing for details on placing headers onto PC boards. Base Part Numbers Round Post Header Part Nos. RoHS Equiv. Standard UL94V-0, Tin Plated 647648 32-42 Standard UL94V-0, .000015 [0.00038] Gold Plated 647649 32-42 Note: All RoHS equivalent part numbers may not be available upon catalog release. If the number you need is not available, please contact Product Engineering to expedite your request. Note: Select load headers (omitted pin headers) are available upon request. Please contact product engineer or product manager for details. 52 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors MTA-156 Shrouded Headers--Straight and Right-Angle Straight Post (.045 [1.14] Square or Round) Material and Finish Housing -- UL94V-0 rated, polyester, black Posts -- Copper alloy, tin plated; or .000030 [0.00076] or .000015 [0.00038] gold over nickel For mateability options, see matrix on pages 34, 35, 54 and 58. For mating half visuals, see pages 36 thru 39 and 55. Header Ordering Information The "Base Part Numbers" Chart at right shows the base part number and number of posts available for the described headers. Prefixes and suffixes are determined by the number of post positions in the header. For example, the complete part number for a 10-position header with straight, square posts and with pegs would be: Base number 647127 plus prefix-and-suffix 4- -- -0 The correct ordering number is 4-647127-0 No. of Pos. 2 3 4 5 6 7 8 9 10 11 12 Dim. A .406 10.31 .562 14.27 .718 18.24 .874 22.20 1.030 26.16 1.186 30.12 1.342 34.09 1.498 38.05 1.654 42.01 1.810 45.97 1.966 49.94 RoHS Prefix/ Suffix 2--2 2--3 2--4 .455 [11.56] .300 [7.62] Post No. 1 2--7 2--8 2--9 3--0 3--1 3--2 Note: All RoHS equivalent part numbers may not be available upon catalog release. If the number you need is not available, please contact Product Engineering to expedite your request. .210 [5.33] .125 .010 [3.18 0.25] Front Bend .550 [13.97] .300 [7.62] Ref. .045 [1.14] .100 .167 [2.54] [4.24] .125 [3.18] .455 [11.56] .210 [5.33] .525 [13.34] Ref. .205 [5.21] PC Board Hole Diameters Square Post .069/.065 [1.75/1.65] Round Post .054/.050 [1.37/1.27] .156 Typ. Post [3.96] No. 1 .125 [3.18] Rear Bend Note: Consult Product Drawing for details on placing headers onto PC boards. .069/.065 Dia. [1.75/1.65] .167 [4.24] .066/062 [1.68/1.58] Dia. .245 Min. [6.22] .239 [6.07] .066/062 [1.68/1.58] Dia. .078 [1.98] Edge of Board .350/.700 [8.89/17.78] .078 [1.98] Edge of Board .156 [3.96] .156 [3.96] Recommended Mounting Hole Pattern for .062 [1.57] Thick PC Board Using a Straight Post Header Recommended Mounting Hole Pattern for .062 [1.57] Thick PC Board Using a Right-Angle Header Base Part Numbers Straight Square Posts Without Pegs With Pegs Header RoHS Header RoHS Part Nos. Equiv. Part Nos. Equiv. Standard UL94V-0, Tin Plated 647123 22-32 Straight Round Posts Without Pegs With Pegs Header RoHS Header RoHS Part Nos. Equiv. Part Nos. Equiv. 22-32 647124 22-32 647128 22-32 Standard UL94V-0, .000030 [0.00076] Gold Plated 647131 22-32 647135 22-32 647132 22-32 647136 22-32 Standard UL94V-0, .000015 [0.00038] Gold Plated 647139 22-32 647143 22-32 647140 22-32 647144 22-32 647127 2--5 2--6 .205 .002 .156 0.05] Typ. Post [5.21 [3.96] No. 1 .210 [5.33] .525 [13.34] .125 [3.18] .156 [3.96] .455 [11.56] .525 [13.34] Ref. Polarized Retention Peg A .045 [1.14] .300 [7.62] Ref. .045 [1.14] MTA-156 .156 [3.96] Notes: 1. Post(s) can be omitted for keying purposes. Specify the desired post(s) to be omitted using the figure to identify Post No. 1. 2. Gold headers are duplex plated, gold on mating end of post and tin on the solder tail. 3. Peg holes are not required in PC boards when headers without pegs are used. 4. One peg only on a 2 position header, other position sizes have two pegs. 5. Right-angle front and rear bend headers with retention pegs can be made available upon request. Minimums may apply. Right-Angle (.045 [1.14] Square) Square Posts Right-Angle Posts, Front Bend Without Pegs Header RoHS Part Nos. Equiv. Standard UL94V-0, Tin Plated 647125 Right-Angle Posts, Rear Bend Without Pegs Header RoHS Part Nos. Equiv. 22-32 647126 22-32 Standard UL94V-0, .000030 [0.00076] Gold Plated 647133 22-32 647134 22-32 Standard UL94V-0, .000015 [0.00038] Gold Plated 647141 22-32 647142 22-32 Note: Select load headers (omitted pin headers) are available upon request. Please contact product engineer or product manager for details. 53 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors MTA-156 IDC Quad Connectors Provides four points of contact Greater current carrying capability than Standard MTA-156 Connectors Connector styles include both closed end and feedthru with locking ramp, with and without polarizing tabs in 2 through 12 positions Available for wire ranges of 18 - 22 AWG [0.9- 0.3 mm] Contacts are lubricated for fretting corrosion protection Complies with Tyco Electronics Quality Specification 102-6, "Preparation of Design Objectives" Uses existing MTA application tooling for termination Quad connectors preloaded with contacts All contacts are slotted for insulation displacement (IDC) termination technique Connectors and headers are end-to-end stackable The MTA-156 Quad Connectors only mate with standard MTA156 square post headers and use existing MTA application tooling for termination. Only one wire to be terminated into an IDC contact slot. *The 102-6 Quality Specification is the new procedure for "Preparation of Design Objectives". Its purpose is to provide a means for verifying the maximum current carrying capacity of the device. Note: Refer to pages 70 through 74 for approved wire listings. AWG size is "frosted" on the side of the connector Product Specifications 108-1219 MTA-156 Quad Connector System Recognized under the Component Program of Underwriters Laboratories Inc., File No. E28476 Application Specifications 114-1048 MTA-156 Quad Connector 647 647 647 123 647 754 644 752 644 751 644 749 644 617 644 615 644 613 644 611 644 445 640 389 640 383 640 644329 644370 644371 644375 644376 644377 644381 644382 644383 644387 644388 644389 385 Headers Satisfies the VDE requirements according to VDE 110, Insulation Group B, 250 vac for air and creepage paths 640 R This matrix has been prepared to assist you, our customer, in defining the correct mating halves for the MTA-156 header and connector combination. Where a "Y" is indicated the combination is a valid mating pair. Connectors Certified by Canadian Standards Association, File No. LR 7189 Voltage Rating -- 600 vac Current Rating -- 12.5 amp max. on a single circuit. For Multiple Circuit Loading -- refer to Product Specification for current rating chart. Low-Level Resistance -- 3.0 m max. initial Dielectric Withstanding Voltage -- 1500 vac/1 min. Insulation Resistance -- 5000 M min. initial Operating Temperature -- -55 C to 105 C Technical Documents R Performance Data 127 The connectors are available for wire ranges of 18 - 22 AWG [0.9- 0.3 mm2] and in a variety of styles including closed end and feed-thru with locking ramp, with and without polarizing tabs. 126 The MTA-156 Quad Connector provides a connection with four points of contact. The UL94V-0 rated connector with multi-point contacts provides greater current carrying capability than the Standard MTA-156 Connector. These connectors comply with Tyco Electronics Quality Specification 102-6* and satisfy the VDE requirements according to VDE 110. 125 MTA-156 .156 [3.96] Product Facts Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y 54 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors MTA-156 IDC Quad Connectors--Closed End and Feed-Thru Closed End with Locking Ramp A .097 [2.46] .090 [2.29] .280 .230 [7.11] [5.84] .100 [2.54] .325 .355 [8.26] [9.02] AWG .180 [4.57] .156 Typ. [3.96] .245 [6.22] .100 [2.54] .308 [7.82] AWG .725 [18.42] without Polarizing Tabs with Polarizing Tabs Feed-Thru with Locking Ramp .245 [6.22] A .090 [2.29] .230 .280 [5.84] [7.11] .325 .385 [8.26] [9.78] AWG .180 [4.57] .156 Typ. [3.96] .100 [2.54] .100 [2.54] .308 [7.82] MTA-156 .156 [3.96] .097 [2.46] AWG .725 [18.42] with Polarizing Tabs without Polarizing Tabs Material and Finish Housing -- UL94V-0 rated, nylon, black Contacts -- High conductivity copper alloy, post tin plated For mateability options, see matrix on page 54. For strain relief and dust covers, see pages 40 and 41. For mating half visuals, see pages 46 thru 48 and 50, 52 and 53, (49 and 51 Front Bend Headers only). Mates with tin-plated square posts only. Refer to pages 70 thru 74 for approved wire listing. Note: To determine connector overall length (Dim. A), multiply .156 x the number of circuits. Example: .156 x 10 circuits equals 1.560 inches [39.62 mm]. Base Part Numbers Closed End with Locking Ramp Without Tabs With Tabs Connector Type & Wire Size Connector Part Nos. Standard UL94V-0, Tin Plated 18 AWG 644329 0.8-0.9 mm2 20 AWG 644370 0.5-0.6 mm2 22 AWG 644371 0.3-0.4 mm2 Feed-Thru with Locking Ramp Without Tabs With Tabs RoHS Equiv. Connector Part Nos. RoHS Equiv. Connector Part Nos. RoHS Equiv. Connector Part Nos. RoHS Equiv. 32-42 644381 32-42 644375 32-42 644387 32-42 32-42 644382 32-42 644376 32-42 644388 32-42 32-42 644383 32-42 644377 32-42 644389 32-42 Replacement IDC Contacts Connector Ordering Information The "Base Part Numbers" Chart above shows the base part number and number of circuits available for the described connectors. Prefixes and suffixes are determined by the number of circuit positions in the connector. For example, the complete part number for a 10-position closed end connector with locking ramp and without polarizing tabs for 18 AWG wire would be: Base number 644329 plus prefix-and-suffix 1- -- -0 The correct ordering number is 1-644329-0 Material and Finish The set of numbers in bold face are the RoHS equivalent version of the standard product. Example: No. of Pos. Standard Prefix/Suffix 2 644329-2 thru 1-644329-2 12 Lead Free RoHS Prefix/Suffix 3-644329-2 4-644329-2 See page 15 for an explanation of RoHS lead free equivalents. Note: All RoHS equivalent part numbers may not be available upon catalog release. If the number you need is not available, please contact Product Engineering to expedite your request. Contacts -- High conductivity copper alloy post tin plated .562 [14.27] .116 [2.95] Wire Size AWG mm2 18 0.8-0.9 20 0.5-0.6 22 0.3-0.4 Part Numbers 3-644508-1 3-644509-1 3-644510-1 Note: Tyco Electronics does not recommend terminating an MTA contact more than one time. Use replacement contacts when required for field repairs or wire gage changes. 55 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors MTA-156 IDC Card Edge Connectors--Closed End and Feed-Thru Material and Finish C B A Housing -- UL94V-0 rated, polyester, see chart for color Contacts -- Phosphor bronze, post tin plated .161 Ref. [4.09] .156 [3.96] Typ. .094 [2.39] .170 [4.32] Note: Refer to pages 70 thru 74 for approved wire listings. MTA-156 .156 [3.96] Color Coding by Wire Size for UL94V-0 Connectors 26 AWG -- Blue 24 AWG -- White 22 AWG -- Red 20 AWG -- Yellow 18 AWG -- Orange .075 [1.91] .300 [7.62] .380 [9.65] .440 [11.18] .125 Dia. [3.18] .677 [17.2] .100 [2.54] Min. D .005 [ 0.13 ] .100 [2.54] Min. .156 [3.96] Typ. .138 [3.51] E R. .075 [1.91] .015 .005 [0.38 0.13] x 45 Cham. Both sides .375 [9.53] Connector Ordering Information The "Base Part Numbers" Chart at right shows the base part number and number of circuits available for the described connectors. Prefixes and suffixes are determined by the number of circuit positions in the connector. For example, the complete part number for a 12-position closed end connector without mounting ears for 18 AWG wire would be: Base number 640859 plus prefix-and-suffix 1- -- -2 The correct ordering number is 1-640859-2 See page 15 for an explanation of RoHS lead free equivalents. Performance Data Voltage Rating -- 600 vac Current Rating -- 5 amp max. Low-Level Resistance -- 7 m max. initial Dielectric Withstanding Voltage -- 1250 vac/1 min. Insulation Resistance -- 5000 M min. initial Operating Temperature -- 55 C to 105 C Technical Documents Product Specification 108-1058 MTA-156 Card Edge Connectors Application Specification 114-1020 MTA-156 Connectors, Posted Connectors and Card Edge Connectors .312 .005 [7.92 0.13] Circuitry side .090 [2.29] Min. .130 [3.3] Typ. .145 [3.68] B Recommended Panel Cutout Recommended PC Board Layout for .062 [1.57] Thk. PC Board Base Part Numbers Closed End Without With Mounting Ears Mounting Ears No. of No. of Connector Circuits/ Connector Circuits/ Part Nos. RoHS Part Nos. RoHS Equiv. Equiv. Standard UL94V-0, Tin Plated 3, 6, 9, 12, 3, 6, 9, 12, 18 AWG 15,18, 20-24 640864 15,18, 20-24 640859 33, 36, 39, 42, 33, 36, 39, 42, 0.8-0.9 mm2 45, 48, 50-54 45, 48, 50-54 3, 6, 9, 12, 3, 6, 9, 12, 20 AWG 15,18, 20-24 640865 15,18, 20-24 640860 2 33, 36, 39, 42, 33, 36, 39, 42, 0.5-0.6 mm 45, 48, 50-54 45, 48, 50-54 3, 6, 9, 12, 3, 6, 9, 12, 22 AWG 15,18, 20-24 640866 15,18, 20-24 640861 2 33, 36, 39, 42, 33, 36, 39, 42, 0.3-0.4 mm 45, 48, 50-54 45, 48, 50-54 3, 6, 9, 12, 3, 6, 9, 12, 24 AWG 15,18, 20-24 640867 15,18, 20-24 640862 33, 36, 39, 42, 33, 36, 39, 42, 0.2 mm2 45, 48, 50-54 45, 48, 50-54 3, 6, 9, 12, 3, 6, 9, 12, 26 AWG 15,18, 20-24 640868 15,18, 20-24 640863 33, 36, 39, 42, 33, 36, 39, 42, 0.12-0.15 mm2 45, 48, 50-54 45, 48, 50-54 Connector Type & Wire Size No. of Circuits 3 6 9 12 15 18 20 21 22 23 24 A .500 [12.70] .968 [24.59] 1.436 [36.47] 1.904 [48.36] 2.372 [60.25] 2.840 [72.14] 3.152 [80.06] 3.308 [84.02] 3.464 [87.99] 3.620 [91.95] 3.776 [95.91] B .926 [23.52] 1.394 [35.41] 1.862 [47.29] 2.330 [59.18] 2.798 [71.07] 3.266 [82.96] 3.578 [90.88] 3.734 [94.84] 3.890 [98.81] 4.046 [102.77] 4.202 [106.73] Dimensions C 1.248 [31.70] 1.716 [43.59] 2.184 [55.47] 2.652 [67.36] 3.120 [79.25] 3.588 [91.14] 3.900 [99.06] 4.056 [103.02] 4.212 [106.98] 4.368 [110.95] 4.524 [114.91] Feed-Thru Without With Mounting Ears Mounting Ears No. of No. of Connector Circuits/ Connector Circuits/ Part Nos. RoHS Part Nos. RoHS Equiv. Equiv. 3, 6, 9, 12, 15,18, 20-24 641283 33, 36, 39, 42, 45, 48, 50-54 3, 6, 9, 12, 15,18, 20-24 641284 33, 36, 39, 42, 45, 48, 50-54 3, 6, 9, 12, 15,18, 20-24 641285 33, 36, 39, 42, 45, 48, 50-54 3, 6, 9, 12, 15,18, 20-24 641286 33, 36, 39, 42, 45, 48, 50-54 3, 6, 9, 12, 15,18, 20-24 641287 33, 36, 39, 42, 45, 48, 50-54 D .484 [12.29] .952 [24.18] 1.420 [36.07] 1.888 [47.96] 2.356 [59.84] 2.824 [71.73] 3.136 [79.65] 3.292 [83.62] 3.448 [87.58] 3.604 [91.54] 3.760 [95.50] 3, 6, 9, 12, 15,18, 20-24 641288 33, 36, 39, 42, 45, 48, 50-54 3, 6, 9, 12, 15,18, 20-24 641289 33, 36, 39, 42, 45, 48, 50-54 3, 6, 9, 12, 15,18, 20-24 641290 33, 36, 39, 42, 45, 48, 50-54 3, 6, 9, 12, 15,18, 20-24 641291 33, 36, 39, 42, 45, 48, 50-54 3, 6, 9, 12, 15,18, 20-24 641292 33, 36, 39, 42, 45, 48, 50-54 E .650 [16.51] 1.118 [28.40] 1.586 [40.28] 2.054 [52.17] 2.522 [64.06] 2.990 [75.95] 3.302 [83.87] 3.458 [87.83] 3.614 [91.80] 3.770 [95.76] 3.926 [99.72] Prefix/ Suffix 11122222- -3 -6 -9 -2 -5 -8 -0 -1 -2 -3 -4 56 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors MTA-156 IDC Card Edge Accessories Dust Cover Retention Dimple Material (RoHS Compliant) UL94V-0 rated, polyester, white .530 [13.46] Cover is for both Closed End and Feed-Thru connectors .130 [3.3] A Cover Ordering Information MTA-156 .156 [3.96] The "Base Part Numbers" Chart at right shows the base part number and number of circuits available for the described cover. Prefixes and suffixes are determined by the number of circuit positions in the cover. For example, the complete part number for a 12-position dust cover would be: Base number 641106 plus prefix-and-suffix 1- -- -2 The correct ordering number is 1-641106-2 Base Part Number Cover Part No. 641106 No. of Circuits 3, 6, 9, 12, 15, 18, 20-24 Locking Plugs No. of Circuits 3 6 9 12 15 18 20 21 22 23 24 Dim. A .504 12.80 .972 24.69 1.440 36.58 1.908 48.46 2.376 60.35 2.844 72.24 3.156 80.16 3.312 84.12 3.468 88.09 3.624 92.05 3.780 96.01 Prefix/ Suffix -3 Material (RoHS Compliant) -6 UL94V-2 rated, nylon, white Part Number 641101-1 -9 1- -2 1- -5 1- -8 2- -0 2- -1 2- -2 2- -3 2- -4 .075 [1.91] .195 [4.95] 1.150 [29.21] .074 [1.88] Note: Contact must be removed to install locking plug. Material (RoHS Compliant) UL94V-2 rated, nylon, white Part Number 641293-1 Replacement IDC Contacts .100 [2.54] .126 [3.2] Material and Finish Phosphor bronze; post tin plated .170 [4.32] .609 [15.47] Part Numbers 3-640991-1 (18 AWG [0.8-0.9 mm2]) 3-640992-1 (20 AWG [0.5-0.6 mm2]) 3-640993-1 (22 AWG [0.3-0.4 mm2]) 3-640994-1 (24 AWG [0.2 mm2]) 3-640995-1 (26 AWG [0.12-0.15 mm2]) .900 [22.86] .130 [3.3] .100 [2.54] Note: Contact can remain during locking plug installation. 57 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors .156 [3.96] Centerline SL-156 Crimp Contacts and Housings SL-156 .156 [3.96] Product Facts Rugged wire-to-board interconnection to mate with .045 square or round post headers or staked posts on .156 centers Standard Connectors accept wire range of 18-24 AWG [0.9-0.2 mm] and LID Connectors accept wire range of 18-24 AWG [0.9-0.2 mm] and a limited 16 AWG [1.29-1.42 mm] (2550-2800 CMA) Two-piece interconnection system (connector/header) Housing made of flame retardant nylon Meets the material requirements of Table 23.1 of UL1410 Standard for High-Voltage Television Receivers and Video Productions Recognized under the Component Program of Underwriters Laboratories Inc., File No. E28476 R Certified by Canadian Standards Association, File No. LR7189 Available in 1- through 24-position connector configurations Technical Documents Connectors are end-to-end stackable Application Specification 114-1021 Wire-to-board system offers polarization with friction lock for positive mating R Product Specification 108-1049, 108-1049-1, 108-1049-2 These matrixes represent only the housing and header combinations. You also need to consider the plating on the contacts and headers. Gold contacts with gold headers and tin contacts with tin headers. Matrix for Tin Plated Part Numbers The AMP SL-156 connectors shown on the following pages are designed to mate with .045 [1.14] square or round post headers or staked posts on .156 [3.96] centers. The wire-to-board connector is a two-piece connector system with the wire crimped to the contact, then inserted into the housing. This product mates with the MTA-156 flat, polarized and friction lock header, or staked posts (not MTA-156 shrouded headers). Performance Data Voltage Rating -- 250 vac Current Rating -- 10 amp max. at 250 vac Low-Level Resistance -- 3.0 m max. initial Dielectric Withstanding Voltage -- 2000 vac/1 min. Insulation Resistance -- 1000 M min. initial Operating Temperature -- 55 C to 105 C The Large Insulation Diameter (LID) Contacts and Housings are for use in applications where wire insulation is up to .112 [2.84] in diameter. Standard LID 640250 647401 640251 647400 770849 647402 6403 83 6403 84 6403 85 6403 87 6403 88 6403 89 6404 45 6446 11 6446 12 6446 13 6446 14 6446 15 6446 16 6446 17 6447 49 6447 50 6447 51 6447 52 6447 53 6447 54 6447 55 6472 27 6472 28 6472 29 6472 30 6472 60 6472 62 Housings Headers Matrix for .000030 [0.00076] Gold Plated Part Numbers Y Y Y N Y Y Y Y Y Y Y Y Y Y Y Y Y N Y Y Y Y Y Y N Y Y Y Y Y Y Y Y Y N Y Y Y Y Y Y Y Y Y Y Y N Y Y Y N Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y N Y Y Y N Y Y Y Y Y Y Y Y 02 6412 03 6412 04 6412 07 6412 08 6412 09 6412 10 6446 27 6446 28 6446 29 6446 30 6446 31 6446 32 6446 33 6447 56 6447 57 6447 58 6447 59 6447 60 6447 61 6447 62 LID Standard 640250 647401 640251 647400 770849 647402 6412 Housings Headers Y Y Y N Y Y Y Y Y Y N Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y N Y Y Y Y Y Y N Y Y Y Y Y Y Y Y Y N Y Y Y Y Y Y Y Y Y N 13 6411 6411 Housings Standard LID 640250 647401 640251 647400 770849 647402 14 6411 15 6411 18 6411 19 6411 20 6411 21 6443 22 6447 63 6447 64 6447 65 6447 66 6447 67 6447 68 6447 69 6472 61 Headers Matrix for .000015 [0.00038] Gold Plated Part Numbers Y Y Y N Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y N Y Y Y Y Y Y Y Y Y Y N Y Y Y Y Y Y Y Y Y Y Y Y Y N Y 58 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors SL-156 Crimp Contacts and Keying Plugs Contacts .180 [4.57] .115 [2.92] Material and Finish .012 [0.3] bright tin plated brass or phosphor bronze; .012 [0.3] pre-tin brass; or .012 [0.3] brass or phosphor bronze with .000030 [0.00076] gold over nickel (see chart) .121/.115 [3.07/2.92] .131 .004 [3.33 0.10] A High Force (6.5 Amp Max. Current Rating) All tin-plated contacts are post lubricated to resist fretting corrosion B Low Force (6.5 Amp Max. Current Rating) .230 [5.84] Maximum insulation diameter is .105 [2.67] .145/.140 [3.68/3.56] Wire range is 18-30 AWG [0.9-0.06 mm2] SL-156 .156 [3.96] C Hooded (Dual Wipe) (10 Amp. Max. Current Rating) Wire Size AWG mm2 24-30 0.2-0.06 Application Note Part No. 640252 has a higher mating and unmating force than Part No. 350980 and is recommended to be used only in housings with 1 through 12 positions. Part No. 350980 can be used in any size housing but is recommended to be used in housings with 13 through 24 positions. Part No. 770476 is recommended for use in any size housing. Its mating force is similar to Part No. 350980 while unmating force is similar to 640252. Contact A A 18-24 0.9-0.2 B C Material and Finish Strip brass, pre-tin plated Part Numbers Loose Piece 641550-1 brass, bright tin plated brass, pre-tin plated brass, RoHS Compliant brass, bright tin plated brass, pre-tin plated brass, gold plated brass, RoHS Compliant phosphor bronze, bright tin plated phosphor bronze, gold plated phosphor bronze, RoHS Compliant 640252-1 640252-2 3-640252-1 350980-1 350980-2 350980-3 3-350980-1 770476-1 770476-2 3-770476-1 -- 640706-1 640706-2 3-640706-1 640707-1 -- 770258-1 3-640707-1 770522-1 770522-2 3-770522-1 Application Tooling Extraction Tool Part No. 90471-1 Loose Piece Contacts -- PRO-CRIMPER II Hand Tool Part No. 58614-1 (408-4228) [For field service use only] For CERTI-CRIMP hand tool, contact Technical Support. For housings, see pages 60 and 61. Strip Contacts -- AMP-O-LECTRIC Model "G" Termination Machine* Applicator 680211-3 (Request Catalog 65828) AMP-O-LECTRIC Model "K" Termination Machine* Applicator 466468-2 AMP-O-MATIC Stripper-Crimper Machine* SCA 466947-1 or 567828-1 (with CQM) (Request Catalog 65004) AMPOMATOR CLS IV+ Lead Making Machine* Applicator 466468-1 (Request Catalog 82659) *Requires applicators. For part numbers, call Technical Support. Keying Plugs .300 [7.62] Material (RoHS Compliant) .225 [5.72] .300 [7.62] UL94V-2 rated, nylon, natural color Keying Plug Part No. 640254-1 Keying Pin Part No. 640255-1 59 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors SL-156 Housings--Wire-to-Board .660 [16.76] Housings A Material (RoHS Compliant) UL94V-0 rated, nylon, white .076 [1.93] Typ. .097 [2.46] .250 [6.35] Notes: 1. Accepts either .045 [1.14] square or round posts. Housings mate with flat and friction lock headers, or staked posts on .156 [3.96] centers. 1 2 23 24 .037 Ref. [0.93] (A) With Locking Ramp/With Polarizing Tabs 2. Housings without ramp, with polarizing tab, available upon request. Minimums may apply. .660 [16.76] A .100 [2.54] .156 [3.96] Typ. .250 [6.35] 3. Recommend contact: Part No. 640252 for 1 thru 12 positions; Part No. 350980 for 13 thru 24 positions; Part No. 770476 for 1 thru 24 positions. SL-156 .156 [3.96] .156 [3.96] Typ. .100 [2.54] .019 [0.48] 1 2 .076 [1.93] Typ. 23 .097 [2.46] .037 Ref. [0.93] 24 (B) With Locking Ramp/Without Polarizing Tabs For contacts, see page 59. For mateability options, see matrix on page 58. A .660 [16.76] For mating half visuals, for connectors with locking ramp, see pages 46, 47, 48, 50 and 52, (49 and 51 Front Bend Headers only.) .076 [1.93] Typ. .156 [3.96] Typ. .250 [6.35] 1 2 23 24 .060 [1.52] (C) Without Locking Ramp/Without PolarizingTabs For mating half visuals, for connectors without locking ramp, see pages 46 thru 52. Note: Dim. A = 0.156 (No. of Positions - 1) 0.152 No. of Positions* Housing Description Part Numbers* 2-24 A B C With Locking Ramp and Polarizing Tabs With Locking Ramp and without Polarizing Tabs Without Locking Ramp or Polarizing Tabs 770849 640250 640251 1-24 *Base Part Number Prefixes and Suffixes indicate number of contact positions, e.g. 2 Position = 0-xxxxxx-2 and 12 Position = 1-xxxxxx-2. Note: Housings not for use with LID Contacts. Shown on page 62. 60 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors SL-156 Housings With Through Board Latch Housings Material (RoHS Compliant) UL94V-2 rated, nylon, white .156 [3.96] Typ. .078 [1.98] Typ. 1 .075 [1.91] 2 3 4 7 8 9 10 .250 [6.35] .050 .007 [1.27 0.18] .003 0.08 ] SL-156 .156 [3.96] .063 [1.60 .125 [3.18] .063 .003 [1.60 0.08] .660 [16.76] A Mates with .045 square or round staked posts only. For contacts, see page 59 . 10 9 8 7 4 3 2 1 B .105 [2.67] .052 .002 [1.32 0.05] .105 [2.67] Latch Cutout .005 .163 +- .000 0.13 [4.14 +- 0.00 R. .015 Max. [0.38] 4 Plc. .078 [1.98] PC Board Posts .156 [3.96] Recommended PC Board Cutout for .062 [1.57] Thick PC Board No. of Pos. 2 3 4 5 6 7 8 9 10 Dimensions A .312 7.92 .468 11.89 .624 15.85 .780 19.81 .936 23.77 1.092 27.74 1.248 31.70 1.404 35.66 1.560 39.62 B Latch Location Centered Between Pos. Part Number -- 1 and 2 1-770894-21 -- 1 and 2 1-770894-31 -- 2 and 3 1-770894-41 -- 2 and 3 1-770894-51 -- 3 and 4 1-770894-61 -- 3 and 4 1-770894-71 -- 4 and 5 1-770894-81 1 and 2 & 8 and 9 1-770894-91 1 and 2 & 9 and 10 1-770894-01 1.092 27.74 1.248 31.70 Note: Not for use with LID Contacts. Shown on page 62. 61 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors SL-156 Housings and Contacts for Large Insulation Diameter (LID) Wire Housings UL 94V-0 rated, nylon, white Notes: 1. Accepts Standard and LID contacts. 2. Larger opening in housings eases contact insertion when using wires that have large insulation diameters (.100-.112 [2.54-2.84]). 3. Housings are not End-to-End stackable. .660 [16.76] .156 Typ. [3.96] Material (RoHS Compliant) .054 [1.37] Typ. .095 Typ. [2.41] .100 [2.54] .250 [6.35] .0365 [.927] Ref. .054 [1.37] A Note: Dim. A = 0.156 (No. of Positions - 1) 0.19 SL-156 .156 [3.96] For mateability options, see matrix on page 58. For mating half visuals, for connectors with locking ramp, see pages 46, 47, 48, 50 and 52, (49 and 51 Front Bend Headers only.) For mating half visuals, for connectors without locking ramp, see pages 46 thru 52. Description Part Numbers* Housings with Larger Openings for Oversize Wire Without Locking Ramp or Polarizing Tabs With Locking Ramp and without Polarizing Tabs With Locking Ramp and Polarizing Tabs 647401 (shown above) No. of Positions* 1-24 2-24 647400 647402 *Base Part Number Prefixes and Suffixes indicate number of contact positions, e.g. 2 Position = 0-xxxxxx-2 and 12 Position = 1-xxxxxx-2. Contacts Material and Finish .012 [0.3] bright tin plated phosphor bronze; .012 [0.3] phosphor bronze with .000030 [0.00076] gold over nickel (see chart) .160 [4.06] All tin-plated contacts are post lubricated to resist fretting corrosion Maximum insulation diameter is .112 [2.85] Wire range is 18-24 AWG [0.9-0.2 mm2] and a limited 16 AWG [1.29-1.42 mm2] (2550-2800 CMA) .112 [2.84] .108 [2.74] .524 [13.30] .143 Product Specifications 108-1049-1 and 108-1049-2 Hooded (Dual Wipe) (10 Amp Max. Current Rating) Application Specification 114-1021 Application Tooling Extraction Tool Part No. 90471-1 Loose Piece Contacts -- PRO-CRIMPER II Hand Tool Part No. 91368-1 [18-24 AWG] Part No. 91369-1 [16 AWG] (For field service use only.) For CERTI-CRIMP hand tool, contact Technical Support. Strip Contacts -- AMP-O-LECTRIC Model "G" Termination Machine* Applicator 1385048-3 [18-24 AWG] Applicator 1385219-3 [16 AWG] AMP-O-LECTRIC Model "K" Termination Machine* Applicator 1385048-2 [18-24 AWG] Applicator 1385219-2 [16 AWG] Wire Size Material 18-24 AWG Phosphor Bronze 16 AWG (2550-2800 CMA only) Phosphor Bronze Plating Tin Gold RoHS Compliant Tin Gold RoHS Compliant Part Numbers For LID* Wire Strip 647406-1 647406-2 3-647406-1 647466-1 647466-2 3-647466-1 Loose Piece 647409-1 647409-2 3-647409-1 647485-1 647485-2 3-647485-1 *Large Insulation Diameter (.100-.112 [2.54-2.84]) Notes: 1. For information on application tooling, call Technical Support. 2. Can not be used with Standard SL-156 Housings, must be used with LID Housings only. *For additional part numbers and information contact Technical Support. 62 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors AMP Economy Power (EP) Wire-to-Board Connector System Product Facts .156 [3.96], .200 [5.08] and .312 [7.92] centerline Wire-to-board connectors comprised of plug housings, receptacle contacts for discrete wire, and mating post headers Hooded contact designed to accept wire with insulation diameters up to .118 [3.00] Positive locking feature built into header back wall Locking mechanism on connector housing maximizes retention Number of positions: 1 to 11 for .156 [3.96] centerline; 2 to 12 for .200 [5.08] centerline; and 2 to 5 for .312 [7.92] centerline Straight, through-hole headers Positive latch design for easier mating and unmating Polarization tabs help prevent post misalignment and mismating Low-profile mating height of .641 [16.3] for 2 to 11 positions Straight headers are end-toend stackable to conserve PCB space Header packaging: bulk pack and tube loaded Plug housings and post headers intermateable with JST VH connectors Directive 2002/95/EC (RoHS Compliant Recognized under the Component Program of Underwriters Laboratories Inc., File No. E28476 R Certified by Canadian Standards Association, File No. LR 7189 R Applications Household appliances, garage door openers, power supplies, power connections, or other areas requiring additional connector retention AMP Economy Power (EP) Connectors are designed for secondary power circuit applications. They consist of wire-to-pc board plug housings (for receptacle contacts) and mating post headers. Three contact centerline spacings are available: .156 [3.96], .200 [5.08] and .312 [7.92]. Headers with .156 [3.96] centerline are offered in 2 through 11 positions; 2 through 12 positions for .200 [5.08] centerline; and .312 [7.92] centerline are available in 2 through 5 positions. Both versions are provided in bulk pack or in tubes for automatic machines. During mating, the positive locking lever on the outside of the plug housing engages the mating header housing to provide for greater retention. This helps maintain reliable connections, when other non-locking type connectors could vibrate apart. This same locking lever must be depressed to unmate the connectors. The slim, straight, post headers are stackable endto-end for greater flexibility when designing pc board configurations. The locking mechanism is also located high enough to help avoid interference with pc board clear plastic coating (potting), which is a common treatment for many home appliances. The mating height of a low-profile plug and vertical header is .642 [16.3]; even the 1-position high-profile style measures only .732 [18.6] above the pc board. Compact dimensions like these are well suited for most applications in confined spaces. AMP EP .156 [3.96], .200 [5.08] and .312 [7.92] Performance Characteristics Voltage Rating -- 250 VAC Current Rating -- 7.5 amp max. (2 to 11 pos.), 8 amp max. (1 pos.) Low Level Overall Resistance- Initial -- 10 m max. Final -- 20 m max. Dielectric Withstanding Voltage -- 1.5 kV AC, 1 min. Insulation Resistance -- Initial -- 1000 M min. Final -- 500 M min. Durability -- 50 mating and unmating cycles Operating Temperature -- -13F to +221F [-25C to +105C] Wire Size Range -- 18-22 AWG [0.89-0.30 mm2] Insulation Diameter -- .118 [3.00] max. Technical Documents Product Specification 108-5609 Application Specification 114-5253 Instruction Sheet 411-5899 63 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors AMP Economy Power (EP) Wire-to-Board Connector System (Continued) Contacts and Plug Housings, Low-Profile Crimp, Snap-in Receptacle Contacts .083 [2.11] Material and Finish (RoHS Compliant) See chart. .362 [9.19] .055 [1.40] .08 [2.1 Related Product Data Plug Housings -- Pages 64, 67 and 69 AMP EP .156 [3.96] Wire Size Range AWG mm2 Wire Insulation Diameter 18-22 0.89-0.30 .067-.118 1.70-3.00 Material and Finish Part Number Strip Form Loose Piece Phos. Brz., 1123721-1 Pre-Tin Brass, 1123721-2 Pre-Tin Applicator Part Number AMP-O-LECTRIC Terminator Model K Model G Part No. Part No. 1-471273-3 354500-1 AMPOMATOR CLS IV+ Lead Maker Base Part No. 356500 1318912-1* 1385286-1 1385286-2 1385286-3 -- * For 18-20 AWG, use Straight Action Hand Tool (SAHT) Part Number 91579-1. Plug Housings, Low-Profile Material and Finish (RoHS Compliant) .524 [13.31] Housing -- UL 94V-0 rated nylon, natural color Note: Alternate colors available upon request. Minimums may apply. Please contact product engineer or product manager for details. .284 [7.21] Circuit No. 1 (2 Pos.) .142 [3.61] .382 [9.70] Related Product Data Contacts -- see above Mating Post Headers -- Pages 65 and 66 .150 [3.81] A (3-11 Pos.) .295 [7.49] .059 [1.50] .224 [5.69] .154 [3.91] .039 [1.00] .156 [3.96] Section X-X Number of Positions 2 3 4 5 6 7 8 9 10 11 12 Dimension A .310 [ 7.86] .465 [11.82] .621 [15.78] .777 [19.74] .933 [23.70] 1.089 [27.66] 1.245 [31.62] 1.401 [35.58] 1.557 [39.54] 1.713 [43.50] 1.878 [47.70] .039 [1.00] Part Number 1-1123722-2 1-1123722-3 1-1123722-4 1-1123722-5 1-1123722-6 1-1123722-7 1-1123722-8 1-1123722-9 1-1123722-0 1-1123722-1 1-647690-2* * Consult Product Drawing for dimensional detail. 64 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors AMP Economy Power (EP) Wire-to-Board Connector System (Continued) Straight and Right-Angle Low-Profile Post Headers .156 [3.96] Typ. Straight .078 [1.98] Typ. Edge of Board A .156 [3.96] Centerline .190 [4.82] .028 [0.7] .335 [8.5] .268 [6.8] Material and Finish (RoHS Compliant) Housing -- UL 94V-0 rated natural color Note: Alternate colors available upon request. Minimums may apply. Please contact product engineer or product manager for details. Post -- Tin-plated brass .125 [3.18] .077 [1.95] .077 [1.95] .156 Centerline [3.96] .066/.062 [1.68/1.57] .045 Sq. Post [1.14] .069/.065 [1.75/1.65] Recommended Mounting Hole Pattern for .063 [1.6] Thick PC Board .303 [7.7] .244 [6.2] Post No. 1 .118 [3.0] .146 [3.7] Related Product Data Number of Positions Mating Plug Housings -- Page 64 Dimension A .310 [ 7.86] .465 [11.82] .621 [15.78] .777 [19.74] .933 [23.70] 1.089 [27.66] 1.245 [31.62] 1.401 [35.58] 1.557 [39.54] 1.713 [43.50] 1.871 [47.52] 2 3 4 5 6 7 8 9 10 11 12 Part Number Tube Loaded (Pcs. per Tube) 1-1318300-2 (61) 1-1318300-3 (40) 1-1318300-4 (30) 1-1318300-5 (24) 1-1318300-6 (20) 1-1318300-7 (17) 1-1318300-8 (15) 1-1318300-9 (13) 1-1318300-0 (12) 1-1318300-1 (11) -- Bulk Pack with Pegs 1744057-2 1744057-3 1744057-4 1744057-5 1744057-6 1744057-7 1744057-8 1744057-9 1-1744057-0 1-1744057-1 1-1744057-2 AMP EP .156 [3.96] Bulk Pack 1-1123723-2 1-1123723-3 1-1123723-4 1-1123723-5 1-1123723-6 1-1123723-7 1-1123723-8 1-1123723-9 1-1123723-0 1-1123723-1 1-647689-2* * Consult Product Drawing for dimensional detail. .156 [3.96] Centerline Right-Angle Edge of Board A Material and Finish (RoHS Compliant) Housing -- UL 94V-0 rated nylon, natural color Note: Alternate colors available upon request. Minimums may apply. Please contact product engineer or product manager for details. Post -- Tin-plated brass .350 [8.89] .020 [0.50] .339 [8.60] .272 [6.90] .045 Sq. Post [1.14] .156 [3.96] .126 [3.20] . . .079 .004 [2.00 0.10] .126 .004 [3.20 0.10] O .065/.069 [1.65/1.75] .339 [8.60] .370 [9.40] .156 Typ. [3.96] Recommended PC Board Layout Related Product Data Mating Plug Housings -- Page 64 Post No. 1 Number of Positions 2 3 4 5 6 7 8 9 10 11 12 .045 Ref. .142 [3.60] [1.14] Dimension A .312 [ 7.92] .468 [11.88] .624 [15.84] .780 [19.80] .935 [23.76] 1.091 [27.72] 1.247 [31.68] 1.403 [35.64] 1.559 [39.60] 1.715 [43.56] 1.871 [47.52] .323 [8.20] Part Number 647676-2 647676-3 647676-4 647676-5 647676-6 647676-7 647676-8 647676-9 1-647676-0 1-647676-1 1-647676-2 65 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors AMP Economy Power (EP) Wire-to-Board Connector System (Continued) Straight and Right-Angle Low-Profile Post Headers, High Temperature Straight Maximum Temperature Rating: 280C A Edge of Board .190 [4.82] .156 Typ. [3.96] Housing -- UL 94V-0 rated nylon, high temperature, natural color Note: Alternate colors available upon request. Minimums may apply. Please contact product engineer or product manager for details. Post -- Tin-plated brass .225 [5.72] .339 [8.60] .156 [3.96] Centerline Material and Finish (RoHS Compliant) .045 Sq. Post [1.14] Post No. 1 .059 [1.51] O .065/.069 [1.65/1.75] Recommended PC Board Layout .303 [7.70] .575 [14.60] .156 Typ. [3.96] .370 [9.40] .145 [3.69] .323 [8.21] Related Product Data AMP EP .156 [3.96] Mating Plug Housings -- Page 64 Number of Positions 2 3 4 5 6 7 8 9 10 11 Dimension A .312 [ 7.92] .468 [11.88] .624 [15.84] .780 [19.80] .935 [23.76] 1.091 [27.72] 1.247 [31.68] 1.403 [35.64] 1.559 [39.60] 1.715 [43.56] Part Number 1744055-2 1744055-3 1744055-4 1744055-5 1744055-6 1744055-7 1744055-8 1744055-9 1-1744055-0 1-1744055-1 Right-Angle Edge of Board A .156 [3.96] Centerline .190 [4.82] Material and Finish (RoHS Compliant) Housing -- UL 94V-0 rated nylon, high temperature, natural color Note: Alternate colors available upon request. Minimums may apply. Please contact product engineer or product manager for details. Post -- Tin-plated brass .156 Typ. [3.96] .350 [8.89] .339 [8.60] .045 Sq. Post [1.14] Post No. 1 .059 [1.51] O .065/.069 [1.65/1.75] .303 [7.70] .370 [9.40] .617 [15.68] .156 Typ. [3.96] Recommended PC Board Layout Related Product Data Mating Plug Housings -- Page 64 .142 [3.60] Number of Positions 2 3 4 5 6 7 8 9 10 11 12 Dimension A .312 [ 7.92] .468 [11.88] .624 [15.84] .780 [19.80] .935 [23.76] 1.091 [27.72] 1.247 [31.68] 1.403 [35.64] 1.559 [39.60] 1.715 [43.56] 1.871 [47.52] .323 [8.21] Part Number 1744056-2 1744056-3 1744056-4 1744056-5 1744056-6 1744056-7 1744056-8 1744056-9 1-1744056-0 1-1744056-1 1-1744056-2 66 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors AMP Economy Power (EP) Wire-to-Board Connector System (Continued) Plug Housings and Post Headers .406 [10.30] A Plug Housings .200 [5.08] Centerline Material and Finish (RoHS Compliant) Housing -- UL 94V-0 rated nylon, natural color Note: Alternate colors available upon request. Minimums may apply. Please contact product engineer or product manager for details. Related Product Data Contacts -- Page 64 Mating Post Headers -- See below .263 [8.88] .051 [1.30] Circuit No. 1 Number of Positions 2 3 4 5 6 7 8 9 10 11 12 Post Headers .200 [5.08] Centerline .053 Typ. [1.35] .051 [1.30] .200 Typ. [5.08] Dimension A .353 [ 8.98] .553 [14.06] .753 [19.14] .953 [24.22] 1.153 [29.30] 1.353 [34.38] 1.553 [39.46] 1.753 [44.54] 1.953 [49.62] 2.153 [54.70] 2.353 [59.78] Part Number 1744036-2 1744036-3 1744036-4 1744036-5 1744036-6 1744036-7 1744036-8 1744036-9 1-1744036-0 1-1744036-1 1-1744036-2 .200 Typ. [5.08] .190 [4.82] A .339 [8.60] Housing -- UL 94V-0 rated nylon, natural color Note: Alternate colors available upon request. Minimums may apply. Please contact product engineer or product manager for details. Post--Tin-plated brass .200 Typ. [5.08] O .065/.069 [1.65/1.75] .059 [1.51] .045 Sq. Post [1.14] Post No. 1 .575 [14.60] .146 [3.70] .303 [7.70] AMP EP .200 [5.08] Material and Finish (RoHS Compliant) Recommended PC Board Layout .370 [9.40] .323 [8.21] A Related Product Data Edge of Board .190 [4.82] Mating Plug Housings -- See above .669 Max. [17.00] .339 Ref. [8.60] .200 Typ. [5.08] .080 2 Plcs. [2.02] .045 Sq. Post [1.14] .303 [7.70] Post No. 1 .142 [3.60] Number of Positions Dimension A 2 3 4 5 6 7 8 9 10 11 12 .302 [ 7.68] .502 [12.76] .702 [17.84] .902 [22.92] 1.102 [28.00] 1.302 [33.08] 1.502 [38.16] 1.702 [43.24] 1.902 [48.32] 2.102 [53.40] 2.302 [58.48] .059 [1.51] O .065/.069 [1.65/1.75] Recommended PC Board Layout .370 [9.40] .323 [8.21] Part Number Straight 1744037-2 1744037-3 1744037-4 1744037-5 1744037-6 1744037-7 1744037-8 1744037-9 1-1744037-0 1-1744037-1 1-1744037-2 Right-Angle 1744048-2 1744048-3 1744048-4 1744048-5 1744048-6 1744048-7 1744048-8 1744048-9 1-1744048-0 1-1744048-1 1-1744048-2 67 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors AMP Economy Power (EP) Wire-to-Board Connector System (Continued) Straight Post Headers, Low-Profile .312 [7.92] Centerline .063 +.004/-0 Dia. Punched Hole [1.60 +0.1/-0] A Material and Finish (RoHS Compliant) .028 [0.7] Housing -- UL 94V-0 rated natural color Note: Alternate colors available upon request. Minimums may apply. Please contact product engineer or product manager for details. Post -- Tin-plated brass .065 +.004/-0 Dia. Drilled Hole [1.65 +0.1/-0] .335 [8.5] .268 [6.8] .312 [7.92] Centerline .077 [1.95] .077 [1.95] .312 [7.92] Centerline Recommended PC Board Layout Acceptable Board Thickness .062 [1.57] .045 Sq. Post [1.14] .303 [7.7] Post No. 1 .244 [6.2] .118 [3.0] Related Product Data .146 [3.7] Mating Plug Housings -- Page 64 Dimension A .465 [11.82] .777 [19.74] 1.089 [27.66] 1.401 [35.58] Part Number Tube Loaded (Pcs. per Tube) 1-1318301-2 (40) 1-1318301-3 (24) 1-1318301-4 (17) 1-1318301-5 (13) Bulk Pack 1-1123724-2 1-1123724-3 1-1123724-4 1-1123724-5 AMP EP .312 [7.92] Number of Positions 2 3 4 5 Mating Height (Low-Profile) Mating Height .642 [16.3] 68 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors AMP Economy Power (EP) Wire-to-Board Connector System (Continued) Plug Housing and Post Header, High-Profile 1 Position Plug Housing Part Number 1-1123823-1 .571 [14.5] .150 [3.8] .207 [5.3] .244 [6.2] .169 [4.3] .224 [5.7] Material and Finish (RoHS Compliant) Housing -- UL 94V-0 rated nylon, natural color Note: Alternate colors available upon request. Minimums may apply. Please contact product engineer or product manager for details. .039 [1.0] Section X-X Related Product Data Contacts -- Page 64 Mating Post Header -- See below 1 Position Post Header, Straight Part Numbers 1-1123824-1 (Bulk Pack) 1-1318831-1 (Tube Loaded, 55 pcs. per Tube) .118 [3.0] .528 [13.4] .347 .252 [8.8] [6.4] .327 Max. [8.3] Urethane Coating Area Material and Finish (RoHS Compliant) .045 [1.14] Sq. Post .128 [3.25] .337 [8.55] .118 [3.0] .189 [4.8] AMP EP High-Profile 1 Position Housing -- UL 94V-0 rated nylon, natural color Note: Alternate colors available upon request. Minimums may apply. Please contact product engineer or product manager for details. Post -- Tin-plated brass .146 [3.7] Section X-X .063 +.004/-0 Dia. Punched Hole [1.60 +0.1/-0] .079-.051+.004/-0 .065 +.004/-0 Dia. Drilled Hole [2-1.3+0.1/-0] [1.65 +0.1/-0] Component Mounting Side Related Product Data Mating Plug Housing -- See above .079-.032.004 [2-0.80.1] .154 [3.9] Max. Dia. Eyelet PC Board .079-.142.004 [2-3.60.1] .197 [5.0] Max. Dia. .158.004 [4.00.1] .315.004 [8.00.1] Soldering Side Recommended PC Board Layout Acceptable Board Thickness .062 [1.57] Mating Height (High-Profile) Mating Height .732 [18.6] Potting Height .327 [8.3] Max. Retention Lock 69 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors MTA Wire Selection Proper wire selection is critical to the success of a wire-toboard application. The chart identifies wires that have been evaluated and approved by the product engineering section. If you plan to use a wire not on the approved list, please submit a sample 12" length of wire to Tyco Electronics for evaluation. AWG Metric Equivalents 18 --0.8 -0.9 mm2 20 --0.5 -0.6 mm2 22 --0.3 -0.4 mm2 24 --0.2 mm2 26 --0.12 -0.15 mm2 28 --0.08 -0.09 mm2 Product Specifications 108-1050 -- MTA-100 Connectors 108-1050-1-- MTA-100 Posted Connectors 108-1051 -- MTA-156 Connectors 108-1219 -- MTA-156 Quad Connector System 108-1065 -- MTA-156 Posted Connectors 108-1058 -- MTA-156 Card Edge Connectors MTA Connectors Approved Wire Listing MTA-100 Connectors UL 1007 PVC Insulation UL 1061 Semi-Rigid PVC Insulation UL 1095 Semi-Rigid PVC Insulation UL 1371 TEFLON Insulation -- TFE UL 1429 Irradiated PVC -- X.L.P.V.C. UL 2464 PVC UL 3265 Irradiated Polyethylene -- X.L.P.E. UL 3266 Irradiated Polyethylene -- X.L.P.E. MIL-W-16878, Type B-PVC Insulation UL 1213 TEFLON Insulation--T.F.E. MTA-156 Connectors UL 1007 PVC Insulation UL 1061 Semi-Rigid PVC Insulation UL 1180 TEFLON Insulation -- T.F.E. UL 1213 TEFLON Insulation -- T.F.E. UL 1316 PVC/Nylon Wall UL 1429 Irradiated PVC -- X.L.P.V.C. UL 1430 Irradiated PVC -- X.L.P.V.C. UL 1569 PVC UL 3265 Irradiated Polyethylene -- X.L.P.E. UL 3266 Irradiated Polyethylene -- X.L.P.E. Wall .015 [0.381] .009 [0.229] .012 [0.305] .006 [0.152] .010 [0.254] .013 [0.330] .010 [0.254] .015 [0.381] .010 [0.254] .010 [0.254] Approved Wire AWG 22, 24, 26, 28 22, 24, 26, 28 24 22, 26 22, 24, 26, 28 24 22, 24 22, 24 22 22 .015 [0.381] .009 [0.229] .015 [0.381] 010 [0.254] .015 [0.381] .010 [0.254] .015 [0.381] .015 [0.381] .010 [0.254] .015 [0.381] 18, 20, 22, 24 18, 20, 22, 24 22 18, 22, 24 18, 22 18, 20, 22, 24 18, 20, 22, 24 18 22 18, 20, 22, 24 Note: When selecting approved wire styles noted on this list, the MTA Application Specifications guidelines must be followed. Also, due to wire variations in insulation wall thickness, hardness and wire stranding we would recommend evaluating the wire selected before final application approval. TEFLON is a trademark of E.I. DuPont de Nemours and Company. Application Specifications 114-1019 -- MTA-100 Connectors 114-1020 -- MTA-156 Connectors 114-1031 -- MTA-100 Ribbon Cable Connector Assembly 114-1032 -- MTA-156 Ribbon Cable Connector Assembly 114-1048 -- MTA-156 Quad Connector MTA-100 Ribbon Cable Preparation .036-.046 Standard (.046-.052 Allowable for 26-28 AWG Wire Only) .036-.046 Standard (.046-.052 Allowable for 26-28 AWG Wire Only) Dead-End Notch Feed-Thru Notch .280-.450 [7.112-11.43] MTA Wire Selection MTA-156 Ribbon Cable Preparation .500-1.000 [12.70-25.40] .156 [3.96] (Typ.) Conductor .064 [1.63] Typ. (Max.) After Notching Feed-Thru Notch .400-.600 [10.16-15.24] Insulation Web .050 [1.27] Dia. (Max.) For Mass Terminating .062-.080 [1.57-2.03] Flush-Mount Notch .400-.800 [10.16-20.32] .100 [2.54] (Typ.) .062-.080 [1.57-2.03] Ribbon Cable End View Insulation Conductor Web .070 [1.78] Dia. (Max.) For Mass Terminating .094 [2.39] Typ. (Max.) After Notching The dimensions shown represent the recommended minimum and maximum for notches; the actual dimension will depend on your application requirements. Notes: 1. Cable shall be notched, as indicated in the individual ribbon cable connector assembly drawing, according to the requirements specified in these figures. Conductor shall not be exposed after notching, nor shall individual wire stands be cut or nicked. 2. U.L. Style #2651 ribbon cable is approved for use with MTA-100 and MTA-156 connectors per Application Specification 114-1031 and 114-1032. Ribbon Cable -A- .010 Notes: 1. For MTA Cable Assemblies Contact US Engineering Cable Assembly Group. 2. For IDC Cable, see pages 71 thru 74. A Per Inch of Cable Width Cable Edge-to-End Alignment (Ends of the cable shall be prepared as indicated in this figure) 70 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors IDC Ribbon Cable Product Facts Compatible with a variety of Insulation Displacement Connectors Available on .025 [0.63], .0394 [1.00], .050 [1.27], .100 [2.54] and .156 [3.96] centerline Color code edge mark on conductor #1 Gray flame retardant flexible PVC insulation Insulation rated for temperature of -20C to +105C Recognized under the Component Program of Underwriters Laboratories Inc., File No. E53793 R The .100 [2.54] centerline cable is available in 28 to 22 AWG, either as tinned or as overcoated tinned wire, in 2 to 28 conductors. The .156 [3.96] centerline is available in 22 AWG and 18 AWG, either as tinned or overcoated tinned, in 2 to 24 conductors. IDC Ribbon Cable is produced to tighter standards than usually required for high yield insulation displacement terminations. The extra precision offers uncomplicated operation in fully automatic stripping, notching and termination equipment. IDC Ribbon Cable Tyco Electronics Corporation has an expanding array of MADISON CABLE planar PVC insulated product designed for compatibility with a variety of Insulation Displacement Connectors. AMP IDC terminations offer a quick, reliable, cost-effective cabling system which can be automated. .050 [1.27] Centerline, IDC Ribbon Cable Product Specifications Voltage Rating -- 30 VAC Component Recognized by UL to US and Canadian Standards -- AWM Style 2651 Sizes -- 26 AWG, 7/34 Tinned copper, PVC insulation (9 - 64 conductors), 500-ft reels (Base AMP Part Number 57034) 28 AWG, 7/36 Tinned copper, PVC insulation (9 - 64 conductors), 100-ft reels (Base AMP Part Number 57040) and 500-ft reels (Base AMP Part Number 971111) 30 AWG, Other conductor counts available on request. For ordering information, call Toll-Free: 1-877-623-4766 or visit: http://www.madisoncable.com/ fsproducts.htm 71 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors .100 [2.54] Centerline, IDC Ribbon Cable, PVC Insulation Product Specifications B Voltage Rating -- 300 Volts UL Recognized -- AWM Style 2651 CSA -- Available on request A .050 [1.27] Typ. C .010 [0.25] .100 [2.54] Typ. Edge Mark IDC Ribbon Cable No. of Conductors Dimensions B A Part Number C Insulation -- Gray Flame Retardant Flexible PVC .007 [0.17] Minimum Insulation Thickness Temperature Rating -- -20C to +105C Flammability -- UL: VW1 No. of Conductors A Dimensions B C Part Number 28 AWG 7/32 Tinned Copper 2 0.100 [2.54] 5 0.400 [10.16] 10 0.900 [22.86] 15 1.400 [35.56] 20 1.900 [48.26] 25 2.400 [60.96] 28 2.700 [68.58] 0.200 [5.08] 0.500 [12.70] 1.000 [25.40] 1.500 [38.10] 2.000 [50.80] 2.500 [63.50] 2.800 [71.12] 0.044 0.044 0.044 0.044 0.044 0.044 0.044 [1.12] [1.12] [1.12] [1.12] [1.12] [1.12] [1.12] 02WFY00006P 05WFY00006P 10WFY00006P 15WFY00006P 20WFY00006P 25WFY00006P 28WFY00006P 24 AWG 7/32 Overcoated Tinned Copper 2 0.100 [2.54] 0.200 [5.08] 5 0.400 [10.16] 0.500 [12.70] 10 0.900 [22.86] 1.000 [25.40] 15 1.400 [35.56] 1.500 [38.10] 20 1.900 [48.26] 2.000 [50.80] 25 2.400 [60.96] 2.500 [63.50] 28 2.700 [68.58] 2.800 [71.12] 0.044 0.044 0.044 0.044 0.044 0.044 0.044 [1.12] [1.12] [1.12] [1.12] [1.12] [1.12] [1.12] 02WFY00007P 05WFY00007P 10WFY00007P 15WFY00007P 20WFY00007P 25WFY00007P 28WFY00007P 26 AWG 7/34 Tinned Copper 2 0.100 [2.54] 5 0.400 [10.16] 10 0.900 [22.86] 15 1.400 [35.56] 20 1.900 [48.26] 25 2.400 [60.96] 28 2.700 [68.58] 0.200 [6.08] 0.500 [12.70] 1.000 [25.40] 1.500 [38.10] 2.000 [50.80] 2.500 [63.50] 2.800 [71.12] 0.039 0.039 0.039 0.039 0.039 0.039 0.039 [.99] [.99] [.99] [.99] [.99] [.99] [.99] 02WEY00008P 05WEY00004P 10WEY00012P 15WEY00002P 20WEY00008P 25WEY00008P 28WEY00008P 22 AWG 7/30 Tinned Copper 2 0.100 [2.54] 5 0.400 [10.16] 10 0.900 [22.86[ 15 1.400 [35.56] 20 1.900 [48.26] 25 2.400 [60.96] 28 2.700 [68.58] 0.051 0.051 0.051 0.051 0.051 0.051 0.051 [1.30] [1.30] [1.30] [1.30] [1.30] [1.30] [1.30] 02WGY00001P 05WGY00006P 10WGY00002P 15WGY00006P 20WGY00006P 25WGY00006P 28WGY00006P 26 AWG 7/34 Overcoated Tinned Copper 2 0.100 [2.54] 0.200 [5.08] 5 0.400 [10.16] 0.500 [12.70] 10 0.900 [22.86] 1.000 [25.40] 15 1.400 [35.56] 1.500 [38.10] 20 1.900 [48.26] 2.000 [50.80] 25 2.400 [60.96] 2.500 [63.50] 28 2.700 [68.58] 2.800 [71.12] 0.039 0.039 0.039 0.039 0.039 0.039 0.039 [.99] [.99] [.99] [.99] [.99] [.99] [.99] 02WEY00007P 05WEY00007P 10WEY00007P 15WEY00007P 20WEY00007P 25WEY00007P 28WEY00007P 0.200 [5.08] 0.500 [12.70] 1.000 [25.40] 1.500 [38.10] 2.000 [50.80] 2.500 [63.50] 2.800 [71.12] Other Conductor Counts Available on Request. Contact MADISON CABLE (1-877-MADISON), a Division of Tyco Electronics Corporation, for engineering questions or for order placement of this cable. 72 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors .156 [3.96] Centerline, Flat Ribbon Cable, PVC Insulation Product Specifications B Voltage Rating -- 300 Volts UL Recognized -- AWM Style 2651 CSA -- Available on request A .078 [1.98] Typ. C .010 [0.25] .156 [3.96] Typ. Edge Mark No. of Conductors A Insulation -- Gray Flame Retardant Flexible PVC .007 [0.17] Minimum Insulation Thickness Temperature Rating -- -20C to +105C Flammability -- UL: VW1 Dimensions B C Part Number 22 AWG 7/30 Tinned Copper 2 0.156 [3.96] 5 0.624 [15.85] 10 1.404 [35.66] 15 2.184 [55.47] 20 2.964 [75.29] 24 3.588 [91.14] 0.312 [7.92] 0.780 [19.81] 1.560 [39.62] 2.340 [59.44] 3.120 [79.25] 3.744 [95.10] 0.051 0.051 0.051 0.051 0.051 0.051 [1.30] [1.30] [1.30] [1.30] [1.30] [1.30] 02WGY00008P 05WGY00008P 10WGY00008P 15WGY00008P 20WGY00008P 24WGY00008P 18 AWG 7/26 Tinned Copper 2 0.156 [3.96] 5 0.624 [15.85] 10 1.404 [35.66] 15 2.184 [55.47] 20 2.964 [75.29] 24 3.588 [91.14] 0.312 [7.92] 0.780 [19.81] 1.560 [39.62] 2.340 [59.44] 3.120 [79.25] 3.744 [95.10] 0.068 0.068 0.068 0.068 0.068 0.068 [1.73] [1.73] [1.73] [1.73] [1.73] [1.73] 02WJY000001P 05WJY000010P 10WJY000010P 15WJY000010P 20WJY000010P 24WJY000010P Other Conductor Counts Available on Request. Contact MADISON CABLE (1-877-MADISON), a Division of Tyco Electronics Corporation, for engineering questions or for order placement of this cable. IDC Ribbon Cable 73 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors Prepared IDC Ribbon Cable In addition to bulk cable, the US Engineering Cable Assembly Group offers Prepared Cable for the .100 [2.54] and .156 [3.96] centerline cables. This can be in the form of prenotched cable on reels or cut-tolength cable segments. IDC Ribbon Cable Prenotched 250 foot reels of cable can be produced with notches at varying increments or repeating all along the cable. The maximum width of these cables is 20 conductor for the .100 [2.54] centerline and 13 conductor for the .156 [3.96] centerline. Prepared Cable is also available with a Strip and Retain feature allowing the cable assembly to be soldered directly to the PC Board. This saves space and cost and reduces spare parts inventory. Strip and Retain on both ends is used in family board applications to maintain the electrical connection when the PC Board is separated into smaller boards after soldering. Widths are limited to 20 conductors for the .100 [2.54] centerline and 13 conductors for the .156 [3.96] centerline. However, multiple cables can be placed side-by-side in a single connector. For other styles and configurations contact the product engineer or product manager. 74 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors MTA Wire Termination Flowchart Choose the appropriate MTA Connector from the MTA Catalog 82056. Select the proper wire style and AWG for the chosen MTA Connector (Refer to pages 70-74). Choose the MTA Termination Tooling (Refer to pages 76-79). Terminate the Wire-to-MTA Connector per Application Tooling Instruction Sheet. Inspect the MTA Wire Termination per Application Specification, especially the wire depth. See illustrations: 114-13072 -- MTA-50 Connectors, 114-1019 -- MTA-100 Connectors, 114-1020 -- MTA-156 Connectors, Posted Connector, Card Edge, 114-1048 -- MTA-156 Quad Connectors, 114-1031 -- MTA-100 Ribbon Cable Connector Assembly, and 114-1032 -- MTA-156 Ribbon Cable Connector Assembly. B Min. Top of Contact Conductor Bare wires will not be visible beyond back of housing A Centerline of Conductor Bare wires will not extend above top of contact Back of Housing Insulation Strain Relief MTA-100 Conductor Insulation will be contained within the confines of the insulation strain relief as indicated MTA-156 A .069-.087 [1.75-2.21] .090-.113 [2.29-2.87] MTA Wire Termination Flowchart Connector B .040 [1.02] .060 [1.52] Adjust the Termination Tooling (if needed) per Tooling Instruction Sheet (repeat the step above). 75 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors MTA Application Tooling Options Note: Max. Insulation Outside Diameter Wire: .060 [1.52] for MTA-100 Connectors /.095 [2.41] for MTA-156 Connectors One-At-A-Time Termination Tooling Part Numbers MTA Connector Assembly MTA-50 Interchangeable Head and Interchangeable Head and Interchangeable Head Loose-Piece Feed Track Tape Feed Track T-Handle Manual Hand Tool 58074-1 Special Air Bench Mount Air Bench Mount Air Hand Tool 58075-1 Applicator Maintenance Tool 58338-1 Tool 58338-1 Tool Air Bench Mount Tool 58338-1 Electric Bench Electric Bench Electric Bench Machine 931800-1 Machine 931800-1 Machine 931800-1 Closed End Feed Thru 1583503-1 58246-1 (Standard)*n 58246-2 (Ext Wear)* 58246-3 (Ribbon Cable) 58442-1 Closed End MTA-100 Connector Feed Thru Posted (Closed-End) *Repair Kit 856600-1 -- -- 933567-1 853546-1 & 853542-1 (Base) 466728-1 59803-1 -- -- -- 59803-1 -- -- 59803-1 933568-1 853547-1 & 853542-1 (Base) 466727-1 59804-1 -- -- -- 59804-1 58082-1 -- -- -- 59804-1 58061-1 -- -- 567020-1 59839-1 58392-1 -- -- -- 59804-1 58247-1 (Standard)** 58247-2 (Ext Wear) 58247-3 (Ribbon Cable) 58443-1 MTA-156 Connector Feed Thru Posted (Closed-End) MTA-156 Closed Card-Edge End MTA-156 Closed Quad End -- -- 58638-1 Closed End -- Notes: 1. A repair kit consists of a cam, a feed-slide sub-assembly and a locating pawl. Repair kits can be made available for other interchangeable heads. Consult Tyco Electronics. 2. Standard modular heads 58246-1 and 58247-1 are recommended for low volume use. 3. Extended wear modular heads 58246-2 and 58247-2 are recommended for high volume use. 4. T-Handle Maintenance Tools are for maintenance (field) use only. They are not recommended for production. 5. Some Manual Hand Tool Assemblies are available: a. Order 58579-1, comprised of Head 58246-1 with Manual Hand Tool 58074-1. b. Order 58580-1, comprised of Head 58247-1 with Manual Hand Tool 58074-1. c. Order 58639-1, comprised of Head 58638-1 with Manual Hand Tool 58074-1. **Repair Kit 856600-2 MTA-50 Mass Termination Tooling Part Numbers Manual Arbor Frame (with slide) Part Number 1583518-1* Upper Tooling Part Number 1583514-1* Fixture, Discrete Wire, Closed End Part Number 1583515-1 (28-26 AWG) Part Number 1583515-2 (30-28 AWG) Fixture, Discrete Wire, Feed-Thru Part Number 1583516-1 (28-26 AWG) Part Number 1583516-2 (30-28 AWG) Fixture, Ribbon Cable, Closed End or Feed-Thru Part Number 1583517-1 *Required, plus appropriate Fixture(s). MTA-100 and MTA-156 Mass Termination Tooling Part Numbers Interchangeable Head Part Number Used With MTA Connector Assembly Closed End -- -- Feed Thru 58644-1 (Discrete Wire) 58644-2 (Notched Cable) 58074-1 (Man Hd Tl) -- -- -- -- Application Tooling MTA-100 Connector MTA-156 Connector Closed End (Posted) Feed Thru (Posted) Closed End -- -- Feed Thru 58646-1 (Discrete Wire) 58646-2 (Notched Cable) 58074-1 (Man Hd Tl) Card Edge -- -- Closed End (Posted) -- -- Feed Thru (Posted) -- -- Note: Max. Insulation Outside Diameter Wire: .050 [1.27] for MTA-100 Connectors /.070 [1.78] for MTA-156 Connectors Harness Board Holding Fixture Used With Part Number Applicator Tooling Assembly Assembly 58242-1 -- 58242-3 58575-1 Manual Bench 58243-1 -- Tool 58024-1 58243-3 58575-1 and Tooling Assembly 58635-1 58575-1 58039-1 -- -- -- -- 58575-1 -- -- -- 58576-1 -- 58576-1 -- 58576-1 -- 854176-1 & 854200-1 (Base) 312522-1 -- -- -- -- 58576-1 -- -- 58010-2 58576-1 -- -- -- -- -- -- -- 58244-1 58244-3 -- 58576-1 Feed Thru -- -- 58245-1 58245-3 -- 58576-1 2- through 12-positions. 312522-1 58636-1 -- 854175-1 & 854200-1 (Base) 58244-1 58244-3 58245-1 58245-3 59848-1 59848-3 58009-1 58009-2 Closed End MTA-156 Quad Interchangeable Head and Tape Feed Track Part Number Used With Manual Bench Tool 58024-1 and Tooling Assembly 58040-1 Manual Bench Tool 58024-1 and Tooling Assy 58040-1 58024-1 and Tooling Assy 58040-1 2- through 8-positions. 76 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors MTA Application Tooling Options (Continued) One-At-A-Time Termination Tooling (Typical Tooling Combinations) Manual Hand Tool with Interchangeable Head Air Hand Tool with Interchangeable Head Air Bench Mount Tool with Interchangeable Head and Foot Switch Electric Bench Machine with Interchangeable Head Power Units Manual Hand Tool -- Pistol Grip Handle Part No. 58074-1 Air Hand Tool -- Pistol Grip Pneumatic Handle Part No. 58075-1 Easy to use Ratchet control will not release the trigger until it is fully bottomed Head may be rotated for user convenience Light weight Operates at air pressure between 40 and 70 psi [2.76 and 4.83 bar] Head may be rotated for user convenience Air Bench Mount Tool -- Bench Mount Power Assembly Part No. 58338-1 May be mounted with interchangeable head pointed up or down Operated by a foot switch Operates at air pressure between 40 and 70 psi [2.76 and 4.83 bar] Electric Bench Machine with Interchangeable Head and Tape Feed Track Air Bench Mount Tool with Interchangeable Head and Loose-Piece Feed Track Electric Bench Machine -- IDC Power Unit Part No. 931800-1 All electric: 120 VAC, 60 Hz, 2 A Compact, portable and quiet Operated by a foot switch AMP-O-LECTRIC Bench Machine with Special Applicator Interchangeable Heads and Applicators (Refer to page 76 for part numbers.) Terminates one unstripped wire per cycle Aligns and holds the connector in place for each termination Automatically advances the connector after each termination Interchangeable Head and Loose-Piece Feed Track No special setup required Connectors are easily loaded into feed track Connectors are fed using a simple spring-loaded pusher Interchangeable Head and Tape Feed Track No special setup required Tape-mounted connectors are transferred from product reel to feed track by simply pulling on the free end of the carrier tape Connectors are fed using a simple spring-loaded pusher Special Applicator Connectors are easily hand loaded into feed track Automatically advances the connector after each termination Cannot be cycled until the connector is properly positioned Application Tooling Interchangeable Head T-Handle Maintenance Tool 77 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors MTA Application Tooling Options (Continued) Mass Termination Tooling (Typical Tooling Combinations) Manual Bench Tool with Applicator and Holding Fixture Air Harness Tool with Applicator Air Bench Machine 2700 lb Air Bench Machine with Ribbon Cable Notcher Assembly Power Units Manual Bench Tool -- Arbor Frame Assembly Part No. 58024-1 Applicator and holding fixture can be oriented for operator convenience for closed-end or feed-thru terminations Ram height (insertion depth) is easily adjusted May be bench mounted Air Harness Tools -- Hand-Held Power Unit with Applicator Part No. 58575-1 (MTA-100) Part No. 58576-1 (MTA-156) Applicator can be rotated 360 for orientation with holding fixture Insertion depth is easily adjusted Operates at air pressure between 75 and 95 psi [5.17 and 6.55 bar] 2700 lb Air Bench Machine -- Part No. 312522-1 Air Bench Machine -- Pneumatic Unit Part No. 91112-2 Operated by a foot switch Operates at air pressure between 80 and 90 psi [5.52 and 6.21 bar] Not recommended for notching cable with more than 14 conductors Operated by a foot switch Capable of exerting 2,700 lb [12,000 N] of force at minimum 80 psi [5.52 bar] air pressure May be bench mounted Applicators and Notcher Assemblies Ribbon Cable Notcher Assembly Manual Bench Tool with Applicator and Tape Feed Track Applicator and Holding Fixture Application Tooling Wires are laced into plastic combs for mass termination Trims excess wire for closed-end terminations Holding fixture may be mounted to a harness board Applicator and Tape Feed Track Tape-mounted connectors are transferred from product reel to feed track by simply pulling on the free end of the carrier tape Connectors are fed using a simple spring-loaded pusher Feed stop easily adjusted for different connector sizes Notch cable with up to 28 conductors for .100 centerline, and 24 conductors for .156 centerline Pressure plate holds cable in position during notching Scrap conveniently removed through a chute with a blast of air from a built-in air valve Ribbon Cable Notcher Assembly Wire Size AWG Centerline Used With 854449-2 26-28 854449-4 22-28 .100 2.54 .100 2.54 854449-3 18-24 .156 3.96 Manual Bench Tool 58024-1 Air Bench Machine 91112-2 2700 lb Bench Machine 312522-1 AMP-O-LECTRIC Bench Machine 1-471273-3 (with Conversion Kit 690675-2) Part Number Use Adapter 854468-1 when putting Notcher in the AMP-O-LECTRIC Machine. Use Adapter 854468-2 when putting Notcher in the 2700 lb Air Bench Machine. 78 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors MTA Application Tooling Options (Continued) The following is a list of technical documents covering the installation, operation, adjustment, maintenance and repair of MTA application tooling. Technical Documents Instruction Sheets (IS) provide instructions for assembling or applying the product. They are intended for the Manufacturing Assembler or Operator. Customer Manuals (CM) provide complete, detailed instructions on the installation, operation, adjustment, maintenance and repair of complex tools and application machines. Applicator Instructions (AI) are similar to instruction sheets (which cover products and tools), and provide instructions for installation, adjustment and maintenance of applicators used in automatic and semiautomatic machines. Hand Tools, Power Units & Accessories Manual Arbor Frame (MTA-50) Upper Tooling (MTA-50) Manual Arbor Frame Assembly Ribbon Cable Applicator, .100 Ribbon Cable Applicator, .156 Manual Hand Tool Air Bench Mount Tool Air Hand Tool (MTA-100) Air Harness Tool (MTA-156) T-Handle Maintenance Tool (MTA-100) T-Handle Maintenance Tool (MTA-156) Air Arbor Frame Assembly 1583518-1 1583514-1 58024-1 58039-1 58040-1 58074-1 58338-1 58575-1 58576-1 59803-1 59804-1 91112-2 IS 408-8812 IS 408-8812 IS 408-6923 IS 408-6685 IS 408-6701 IS 408-6790 IS 408-9393 IS 408-4260 IS 408-4260 IS 408-7907 IS 408-7907 IS 408-7763 2700 lb Air Bench Machine Terminator Assembly, "G" Term AMP-O-LECTRIC Bench Machine Conversion Kit Base Assembly Base Adapter (AMP-O-LECTRIC) Adapter (2700 lb Machine) Repair Kit Repair Kit Electric Bench Mount Tool 312522-1 354500-1 1-471273-3 690675-2 853542-1 854200-1 854468-1 854468-2 856600-1 856600-2 931800-1 CM 409-5843 CM 409-5842 CM 409-5128 IS 408-8022 IS 408-9636 IS 408-9650 IS 408-9687 IS 408-9687 IS 408-9745 IS 408-9745 CM 409-5746 One-At-A-Time Termination Tooling Interchangeable Heads MTA-50 1583503-1 IS 408-8801 MTA-100 58246-1 IS 408-6929 58246-2 IS 408-9379 58246-3 IS 408-4147 58442-1 IS 408-9603 58638-1 IS 408-4358 58247-1 58247-2 58247-3 58443-1 58061-1 58082-1 58392-1 MTA-156 IS IS IS IS IS IS IS 58242-1 58242-3 58243-1 58635-1 58636-1 58644-1 58644-2 59844-1 59845-1 59845-3 MTA-100 IS IS IS IS IS IS IS IS IS IS 408-6930 408-9380 408-4146 408-9607 408-6794 408-6795 408-9450 Interchangeable Head & Loose Piece Feed Track MTA-100 MTA-156 933567-1 IS 408-9435 933568-1 IS 408-9466 Interchangeable Heads & Tape Feed Track MTA-100 MTA-156 853546-1 IS 408-9636 853547-1 IS 408-9637 Special Applicators MTA-100 MTA-156 466728-1 AI 408-8054 466727-1 AI 408-8054 567020-1 AI 408-8069 Mass Termination Tooling MTA-50 1583515-1 IS 1583515-2 IS 1583516-1 IS 1583516-2 IS 1583517-1 IS 408-8812 408-8812 408-8812 408-8812 408-8812 Typical Application Rates 408-7994 408-7994 408-7994 408-7994 408-7994 408-4406 408-4440 408-7994 408-7994 408-7994 58009-1 58009-2 58010-2 58244-1 58244-3 58245-1 58245-3 58646-1 58646-2 59848-1 59848-3 Produce 6-in. [15 cm] Long Jumpers, One 4-Position MTA-100 Connector per End, Discrete Wire Terminations Per Hour Method -- 854176-1 MTA-156 IS 408-9650 Produce 6-in. [15 cm] Long Jumpers, One 4-Position MTA-100 Connector per End, Ribbon Cable* Method Terminations Per Hour 2700 lb Air Bench Machine 312522-1 with Applicator and Tape Feed Track 854175-1 and 854200-1 (Base) 7,500 Application Tooling Manual Hand Tool 58074-1 with Interchangeable Head 58246-1 Electric Bench Machine 931800-1 with Interchangeable Head 58246-1 Electric Bench Machine 931800-1 with Interchangeable Head and Loose-Piece Feed Track 933567-1 Electric Bench Machine 931800-1 with Interchangeable Head and Tape Feed Track 853546-1 and 853542-1 (Base) Die Set Assembly MTA-100 854175-1 IS 408-9667 MTA-156 IS 408-7995 IS 408-7995 IS 408-7995 IS 408-7995 IS 408-7995 IS 408-7995 IS 408-7995 IS 408-4405 IS 408-4439 IS 408-7995 IS 408-7995 900 1,100 1,250 * Procedure: Mass terminate 12-conductor ribbon cable with three connectors per end. After terminating, separate by tearing the 12-conductor assembly into three 4-conductor assemblies. Cable Notching Cable Ends Per Hour Method 2700 lb Air Bench Machine 312522-1 with Ribbon Cable Notcher Assembly 854449-2 and 854468-2 (Adapter) Apply One 4-Position MTA-100 Feed-Thru Connector per Assembly, Discrete Wire 1,000 Terminations Per Hour Method Manual Bench Tool 58024-1 with Applicator and Holding Fixture 650 For further information about tooling call Technical Support. 79 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors Part Number Index Note: This index lists all cataloged parts by base no. only. Complete part nos. (with prefixes and/or suffixes) are shown on the page(s) indicated. Part Number Index Part No. 02WEY00007P 02WEY00008P 02WFY00006P 02WFY00007P 02WGY00001P 02WGY00008P 02WJY000001P 05WEY00004P 05WEY00007P 05WFY00006P 05WFY00007P 05WGY00006P 05WGY00008P 05WJY000010P 10WEY00007P 10WEY00012P 10WFY00006P 10WFY00007P 10WGY00002P 10WGY00008P 10WJY000010P 15WEY00002P 15WEY00007P 15WFY00006P 15WFY00007P 15WGY00006P 15WGY00008P 15WJY000010P 20WEY00007P 20WEY00008P 20WFY00006P 20WFY00007P 20WGY00006P 20WGY00008P 20WJY000010P 24WGY00008P 24WJY000010P 25WEY00007P 25WEY00008P 25WFY00006P 25WFY00007P 25WGY00006P 28WEY00007P 28WEY00008P 28WFY00006P 28WFY00007P 28WGY00006P 57034 57040 350980 640250 640251 640252 640383 640384 640385 640387 640388 Page 72 72 72 72 72 73 73 72 72 72 72 72 73 73 72 72 72 72 72 73 73 72 72 72 72 72 73 73 72 72 72 72 72 73 73 73 73 72 72 72 72 72 72 72 72 72 72 71 71 59, 60 60 60 59, 60 46 46 47 49 48 Part No. 640389 640426 640427 640428 640429 640430 640431 640432 640433 640434 640435 640440 640441 640442 640443 640445 640452 640453 640454 640455 640456 640457 640468 640469 640470 640471 640472 640473 640474 640475 640476 640477 640478 640479 640480 640481 640550 640551 640556 640557 640558 640559 640595 640599 640600 640601 640602 640604 640605 640606 640607 640608 640620 640621 640622 640623 640629 640630 640631 640632 640633 640634 Page 49 37 37 37 37 37 37 37 37 37 37 15 15 15 15 48 21 21 23 23 24 24 15 15 15 15 37 37 37 37 37 37 37 37 37 37 16 40 41 41 41 41 39 39 39 39 39 39 39 39 39 39 15 15 15 15 42 42 41 41 41 41 Part No. 640635 640636 640637 640638 640639 640642 640643 640706 640707 640708 640709 640859 640860 640861 640862 640863 640864 640865 640866 640867 640868 641101 641106 641113 641114 641115 641118 641119 641120 641121 641122 641123 641124 641125 641126 641127 641143 641144 641145 641146 641147 641148 641149 641150 641151 641152 641153 641154 641155 641156 641157 641168 641169 641170 641171 641172 641173 641174 641175 641176 641177 641186 Page 41 17 17 17 17 16 40 59 59 17 17 56 56 56 56 56 56 56 56 56 56 57 57 46 46 47 49 48 48 49 21 21 23 23 24 24 41 41 41 41 41 37 37 37 37 37 37 37 37 37 37 39 39 39 39 39 39 39 39 39 39 17 Part No. 641187 641188 641189 641190 641191 641192 641193 641198 641199 641200 641201 641202 641203 641204 641207 641208 641209 641210 641211 641212 641213 641214 641215 641216 641217 641218 641219 641220 641221 641222 641223 641224 641225 641226 641227 641228 641229 641230 641231 641232 641233 641234 641235 641236 641237 641238 641239 641240 641241 641242 641243 641244 641283 641284 641285 641286 641287 641288 641289 641290 641291 641292 Page 17 17 17 15 15 15 15 15 15 15 15 46 46 47 49 48 48 49 21 21 23 23 24 24 37 37 37 37 37 37 37 37 37 37 39 39 39 39 39 39 39 39 39 39 15 15 15 15 15 15 15 15 56 56 56 56 56 56 56 56 56 56 80 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors Part Number Index (Continued) Page 57 39 39 39 39 39 39 39 39 39 39 15 15 15 15 45 45 45 45 45 45 45 45 45 45 42 45 45 45 45 45 42 15 15 15 15 59 42 17 17 17 17 15 15 15 15 17 40 40 16 16 15 15 15 15 15 37 37 37 37 37 15 Part No. 643995 644020 644038 644040 644042 644043 644044 644082 644083 644284 644312 644313 644329 644370 644371 644375 644376 644377 644381 644382 644383 644387 644388 644389 644456 644457 644460 644461 644462 644463 644464 644465 644466 644467 644468 644469 644470 644471 644472 644486 644487 644488 644489 644497 644501 644502 644508 644509 644510 644511 644512 644513 644514 644540 644563 644564 644565 644566 644567 644569 644570 644572 Page 45 15 15 15 15 15 15 37 15 37 15 15 55 55 55 55 55 55 55 55 55 55 55 55 22 22 37 37 37 37 37 39 39 39 39 39 39 39 39 30 30 30 30 15 37 37 55 55 55 15 15 15 15 15 15 15 15 37 39 39 39 39 Part No. 644574 644575 644576 644577 644578 644579 644611 644612 644613 644614 644615 644616 644617 644627 644628 644629 644630 644631 644632 644633 644662 644663 644687 644694 644695 644702 644718 644720 644726 644749 644750 644751 644752 644753 644754 644755 644756 644757 644758 644759 644760 644761 644762 644763 644764 644765 644766 644767 644768 644769 644783 644791 644795 644803 644807 644809 644812 644814 644860 644861 644874 644875 Page 15 15 15 15 15 15 50 50 51 51 50 50 51 50 50 51 51 50 50 51 37 37 37 22 22 15 39 39 15 46 46 47 48 48 49 49 46 46 47 48 48 49 49 46 46 47 48 48 49 49 37 37 15 30 45 45 45 45 37 30 24 24 Part No. 644876 644877 644878 644884 644885 644886 644887 644888 644889 644890 644891 644892 644893 644894 644896 644897 644898 647000 647001 647002 647003 647004 647005 647006 647007 647008 647009 647010 647011 647012 647013 647014 647015 647016 647017 647018 647019 647020 647021 647022 647023 647030 647031 647032 647033 647047 647048 647050 647051 647075 647076 647078 647079 647106 647107 647108 647109 647114 647116 647117 647123 647124 Page 23 23 37 22 22 22 22 22 22 22 22 32 32 32 32 32 32 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 27 27 28 28 27 27 28 28 29 29 29 27 27 28 28 53 53 Part Number Index Part No. 641293 641301 641302 641303 641304 641305 641306 641307 641308 641309 641310 641311 641312 641313 641314 641425 641426 641427 641428 641429 641435 641436 641437 641438 641439 641440 641522 641523 641524 641525 641526 641533 641534 641535 641536 641537 641550 641623 641643 641644 641645 641646 641653 641654 641655 641656 641994 643067 643071 643075 643077 643498 643813 643814 643815 643816 643817 643818 643819 643820 643821 643828 81 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors Part Number Index (Continued) Part No. 647125 647126 647127 647128 647131 647132 647133 647134 647135 647136 647139 647140 647141 647142 647143 647144 647166 647167 647168 647295 647296 647297 647298 647299 647300 647400 647401 647402 647406 647409 647466 647476 647477 Page 53 53 53 53 53 53 53 53 53 53 53 53 53 53 53 53 29 29 29 28 28 28 27 27 27 62 62 62 62 62 62 45 15 Part No. 647478 647479 647480 647481 647485 647496 647497 647609 647623 647624 647625 647626 647627 647628 647629 647630 647646 647648 647649 647651 647652 647653 647676 647689 647690 770258 770476 770522 770849 770894 971111 1123721 1123722 Page 37 39 15 45 62 39 45 25 25 25 25 25 25 26 26 26 47 52 52 26 26 26 65 65 64 59 59, 60 59 60 61 71 64 64 Part No. 1123723 1123724 1123823 1123824 1318300 1318301 1318831 1318912 1375819 1375820 1445120 1445121 1445123 1445124 1445125 1445126 1445169 1445170 1445171 1445172 1445173 1445174 1445336 1445341 1445342 1445343 1445344 1445345 1445346 1445347 1445348 1445349 1445350 Page 65 68 69 69 65 68 69 64 31 31 9 10 9 10 9 10 9 9 9 10 10 10 31 7 7 7 7 7 7 7 7 7 7 Part No. 1445351 1445352 1445353 1445354 1445355 1445356 1445357 1445358 1445359 1445360 1445361 1445362 1445363 1445364 1445365 1445366 1445367 1445368 1445369 1445370 1445371 1445372 1445373 1445374 1445375 1445376 1744017 1744020 1744036 1744037 1744048 1744055 1744056 Page 7 7 7 7 7 7 7 7 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 48 15 67 67 67 66 66 Application Tooling Part Number Index Part No. Part Number Index 58009 58010 58024 58039 58040 58061 58074 58075 58082 58242 58243 58244 58245 58246 58247 58338 58392 58442 58443 Page 76, 79 76, 79 76, 78, 79 76, 79 76, 79 76, 79 76, 77, 79 76, 77 76, 79 76, 79 76, 79 76, 79 76, 79 76, 79 76, 79 76, 77, 79 76, 79 76, 79 76, 79 Part No. 58517 58575 58576 58579 58614 58635 58636 58638 58639 58644 58646 59803 59804 59836 59837 59839 59845 59848 90471 Page Part No. Page Part No. 31 79 79 76 59 79 79 79 76 79 79 79 79 17 41 76 79 79 59 91112 91579 312522 354500 466468 466727 466728 466747 466947 471273 567020 567373 567827 567828 567910 680211 690675 853542 853546 78, 79 64 76, 78, 79 79 59 76, 79 76, 79 17 59 78, 79 76, 79 31 31 59 31 59 78, 79 76, 79 76, 79 853547 854175 854176 854200 854449 854468 856600 931800 933567 933568 1385286 1583503 1583514 1583515 1583516 1583517 1583518 76, 78, 76, 78, 76, 76, 76, 76, 76, 76, 76, 76, Page 76, 76, 76, 76, 78, 76, 76, 77, 76, 76, 76, 76, 76, 76, 76, 76, 79 79 79 79 78 79 79 79 79 79 64 79 79 79 79 79 79 82 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 Global Contacts Americas Argentina - Buenos Aires Phone: +54-11-4733-2200 Fax: +54-11-4733-2211 Brasil - Sao Paulo Phone: +55-11-2103-6000 Fax: +55-11-2103-6030 Canada - Toronto Phone: +905-475-6222 Fax: +905-474-5520 Product Information Center: Phone: +905-470-4425 Fax: +905-474-5525 Chile - Santiago Phone: +56-2-345-0361 Fax: +56-2-223-1477 Colombia - Bogota Phone: +57-1-319-8959 Fax: +57-1-319-8960 Mexico - Mexico City Phone: +52-55-1106-0800 +01-800-733-8926 Fax: +52-55-1106-0901 For Latin/South American Countries not shown Phone: +54-11-4733-2015 Fax: +54-11-4733-2083 United States Harrisburg, PA Phone: +1-717-564-0100 Fax: +1-717-986-7575 Product Information Center: Phone: +1-800-522-6752 Fax: +1-717-986-7575 Troy, MI Phone: +1-248-273-3359 Fax: +1-248-273-3322 Asia/Pacific Australia - Sydney Phone: +61-2-9554-2600 Fax: +61-2-9502-2556 Product Information Center: Phone: +61-2-9840-8200 Fax: +61-2-9634-6188 Japan - Kawasaki, Kanagawa Phone: +81-44-844-8111 Fax: +81-44-812-3207 Product Information Center: Phone: +81-44-844-8013 Fax: +81-44-812-3200 India - Bangalore Phone: +91-80-285-40800 Fax: +91-80-285-40820 Korea - Seoul Phone: +82-2-3415-4500 Fax: +82-2-3486-3810 Indonesia - Jakarta Phone: +65-6482-0311 Fax: +65-6482-1012 Malaysia - Selangor Phone: +60-3-7805-3055 Fax: +60-3-7805-3066 New Zealand - Auckland Phone: +64-9-634-4580 Fax: +64-9-634-4586 Singapore - Singapore Phone: +65-6482-0311 Fax: +65-6482-1012 Philippines - Makati City Phone: +632-848-0171 Fax: +632-867-8661 Taiwan - Taipei Phone: +886-2-8768-2788 Fax: +886-2-8768-2268 People's Republic of China Hong Kong Phone: +852-2735-1628 Fax: +852-2735-0243 Thailand - Bangkok Phone: +66-2-955-0500 Fax: +66-2-955-0505 Shanghai Phone: +86-21-2407-1588 Fax: +86-21-2407-1599 Vietnam - Ho Chi Minh City Phone: +84-8-930-5546 Fax: +84-8-930-3443 Europe/Middle East /Africa Austria - Vienna Phone: +43-1-905-60-0 Fax: +43-1-905-60-1333 Product Information Center: Phone: +43-1-905-60-1249 Fax: +43-1-905-60-1251 France - Cergy-Pontoise Cedex Phone: +33-1-3420-8888 Fax: +33-1-3420-8600 Product Information Center: Phone: +33-1-3420-8686 Fax: +33-1-3420-8623 Belarus - Minsk Phone: +375 17 237 47 94 Fax: +375 17 237 47 94 France Export Divisions - Cergy-Pontoise Cedex Phone: +33-1-3420-8804 Fax: +33-1-3420-8699 Belgium - Kessel-Lo Phone: +32-16-352-300 Fax: +32-16-352-355 Bulgaria - Sofia Phone: +359-2-971-2152 Fax: +359-2-971-2153 Czech Republic and Slovakia Czech Republic - Kurim Phone: +420-541-162-111 Fax: +420-541-162-223 Product Information Center: Phone: +420-541-162-113 Fax: +420-541-162-132 Denmark - Glostrup Phone: +45-43-48-04-00 Fax: +45-43-44-14-14 Egypt - Cairo Phone: +202-419-2334 Fax: +202-417-7647 Estonia - Tartu Phone: +372-5138-274 Fax: +372-7400-779 Finland - Helsinki Phone: +358-95-12-34-20 Fax: +358-95-12-34-250 Tyco Electronics Corporation Germany - Bensheim Phone: +49-6251-133-0 Fax: +49-6251-133-1600 Product Information Center: Phone: +49-6251-133-1999 Fax: +49-6251-133-1988 Greece - Athens Phone: +30-210-9370-396/397 Fax: +30-210-9370-655 Hungary - Budapest Phone: +36-1-289-1000 Fax: +36-1-289-1010 Product Information Center: Phone: +36-1-289-1016 Fax: +36-1-289-1017 Ireland - Dublin Phone: +353-1-866-5612 Fax: +353-1-866-5714 Israel - Petach-Tikva Phone: +972-3-929-0999 Fax: +972-3-919-1088 Italy - Collegno (Torino) Phone: +39-011-4012-111 Fax: +39-011-4031-116 Product Information Center: Phone: +39-011-4012-428 Fax: +39-011-40-287-428 Lithuania and Latvia Lithuania - Vilnius Phone: +370-5-213-1402 Fax: +370-5-213-1403 Product Information Center: Phone: +370-5-211-3016 Fax: +370-5-213-1403 South Africa - Port Elizabeth Phone: +27-41-503-4500 Fax: +27-41-581-0440 Netherlands - 's-Hertogenbosch Phone: +31-73-6246-246 Fax: +31-73-6212-365 Product Information Center: Phone: +31-73-6246-999 Fax: +31-73-6246-998 Sweden - Upplands Vasby Phone: +46-8-50-72-50-00 Fax: +46-8-50-72-50-01 Norway - Nesbru Phone: +47-66-77-88-50 Fax: +47-66-77-88-55 Turkey - Istanbul Phone: +90-212-281-8181/2/3 +90-212-282-5130/5430 Fax: +90-212-281-8184 Poland - Warsaw Phone: +48-22-4576-700 Fax: +48-22-4576-720 Product Information Center: Phone: +48-22-4576-704 Fax: +48-22-4576-720 Romania - Bucharest Phone: +40-21-311-3479/3596 Fax: +40-21-312-0574 Russia - Moscow Phone: +7-495-790-7902 Fax: +7-495-721-1893 Product Information Center: Phone: +7-495-790-7902-404 Fax: +7-495-790-7902-401 Spain - Barcelona Phone: +34-93-291-0330 Fax: +34-93-201-7879 Switzerland - Steinach Phone: +41-71-447-0447 Fax: +41-71-447-0444 Ukraine - Kiev Phone: +380-44-206-2265 Fax: +380-44-206-2264 Product Information Center: Phone: +380-44-206-2265 Fax: +380-44-206-2264 United Kingdom - Stanmore, Middlesex Phone: +44-8706-080208 Fax: +44-208-954-6234 Product Information Center: Freephone (UK only): +0800-267-666 Phone: +44-8706-080208 Fax: +44-208-420-8095 Russia - St. Petersburg Phone: +7-812-718-8192 Fax: +7-812-718-8193 Slovenia - Ljubljana Phone: +386-1561-3270 Fax: +386-1561-3240 www.tycoelectronics.com Tyco Electronics Corporation Harrisburg, PA 82056-10K-MS-FP-6-08-OG3B