Board Level Interconnect products Amphenol 2 "NQIFOPMt#PBSE-FWFM Interconnect products Table of Contents About Amphenol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Quick Selection Guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Amphenol Socapex Box Capabilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 HiLinx - The 100% modular and high density hybrid connector HiLinX product range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 Female signal contacts for receptacles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Male signal contacts for plugs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 4JHOBMDPOUBDUWFSTJPODPNQBUJCJMJUZXJUIUIF.*-%5- . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Special contacts for 3-row hybrid connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Non keying guides / Realignment capability / Mating sequence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 ,FZJOHHVJEFT$POOFDUPSQPMBSJ[BUJPO .*-%5- . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 4JHOBMDPOUBDUWFSTJPOUZQJDBMBSSBOHFNFOUTSPXT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4JHOBMDPOUBDUWFSTJPOMBZPVUTSPXT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hybrid version: dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hybrid version: layouts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . HDAS - High density rectangular pcb connector HDAS product range. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Female signal contacts for receptacles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Male signal contacts for plugs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Female & Male fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Realignment capability / Mating sequence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Typical arrangements 3 & 4 rows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Layouts 3 & 4 rows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Typical arrangements 5 & 6 rows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Layouts 5 & 6 rows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Tooling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 "NQIFOPMt#PBSE-FWFM Interconnect products 3 Table of Contents SMASH - High density PCB interconnect system for harsh environment applications SMASH product range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 Standard technology of contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Special technology of contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 Standard housings and shells . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 Special housings and shells . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 Layouts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 127 Series - Proven, reliable, and robust rectangular PCB connectors )&QSPEVDUSBOHF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Signal contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Special contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Female fittings for receptacles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Male fittings for plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5ZQJDBMBSSBOHFNFOUBOEMBZPVU TJHOBMDPOOFDUPST )&)& . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5ZQJDBMBSSBOHFNFOUBOEMBZPVU IZCSJEDPOOFDUPST )& . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tooling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fittings & contacts compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 54 56 60 64 66 69 70 Other Amphenol Board Level Interconnect Amphenol Aerospace - Brush contacts style connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ?? Amphenol Backplane Systems - VITA46 and 48 VIPER Interconnects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ?? Amphenol Teradyne Connection Systems - The widest high speed products solutions for high speed backplanes. . . . . . . ?? "NQIFOPMt#PBSE-FWFM Interconnect products 4 Amphenol in brief Amphenol is one of the largest manufacturers of interconnect products in the world. The Company designs, manufactures and markets electrical, electronic and fiber optic connectors, coaxial and flat-ribbon cable, and interconnect systems. The primary end markets for the Company's products are communications and information processing markets, including cable television, cellular telephone and data communication and information processing systems; aerospace and military electronics; and automotive, rail and other transportation and industrial applications. Amphenol Socapex in brief Amphenol Socapex is part of Amphenol Corporate. The company has subsidiaries in France, India, China, and in the United States. Amphenol Socapex is a market leader of MIL-DTL-38999 and derived products, high density board level connectors, GJFMECVTBOESVHHFE&UIFSOFUTPMVUJPOT IBSTIFOWJSPONFOUPQUJDBMDPOOFDUPST .*-%5-4FSJFT*SVHHFEJOEVTUSJBMTPMVUJPOTBOE&/DPOOFDUPST Amphenol Socapex is able to meet customer satisfaction through: * Agile & Lean Organization * Global Sourcing * State-of-the-Art Manufacturing * Custom design capability * Competitive Independent Workshops Amphenol Socapex is aware of environmental issues. Indeed, most of our product solutions are compliant with the European RoHS directive concerning electrical and electronic equipment. "NQIFOPMt#PBSE-FWFM Interconnect products Amphenol Socapex Markets Military & Aerospace markets: * Military and commercial avionics and airframe: engines, airframes, cockpit, landing gears... * C4ISR Land: communication systems, radio... * Ground vehicles * Marine applications * Weapons / Munitions * Space: communications satellites Industrial markets: * Oil & Gas: geophysics, drilling, production * Small Urban Electrical Vehicle * Mining: surface and underground mining, ... * Factory Automation: Machine tool, Networks, Field Buses,... * Railway: Signaling, Ground and On Board Equipments,... * )PNFMBOETFDVSJUZ$$57 WJEFP BDDFTTDPOUSPM y * Entertainment 5 "NQIFOPMt#PBSE-FWFM Interconnect products 6 Quick Selection Guide HiLinX HDAS SMASH HE8/127 INDUSTRIAL X X COMMERCIAL AVIONICS & AIRFRAME X X X X MILITARY AVIONICS & AIRFRAME X X X X MARKETS X X GROUND VEHICLE C4ISR X X NAVY X X X X X APPLICATIONS X RADAR ON BOARD COMPUTER DISPLAY UNITS X X X X X X ACTUATORS ENGINE X X X POWER UNITS X X X LANDING GEAR / BRAKING SYSTEMS X X X ORDNANCE X X GENERAL CHARACTERISTICS Male / Female Male / Female Male/Female All possible CONTACT TECHNOLOGY Female Starclip / Male Turned Female Starclip / Male Turned Female Starclip / Male Turned Female Tuning fork / Male Blade PLUG CONTACT TERMINATION 90 & straight PC tail/ Solder cup 90 & straight PC tail/ Solder cup SMT straddle mount SMT/90 & straight PC tail/Crimp/Solder cup RECEPTACLE CONTACT TERMINATION 90 & Straight PC tail/ Solder cup/Press fit 90 & Straight PC tail/ Press fit Straight PC tail/Press fit SMT/90 & straight PC tail/Crimp/Solder cup Yes No Yes No HF/POWER/OPTICAL OPTION $PBY4J[F" Radsok(R)/AmpheluxTM No $PBY4J[F" Radsok(R)/AmpheluxTM $PBY4J[F" DENSITY 0,16 cts/mm2 [103cts/ inch2] 0,16 cts/mm2 [103cts/ inch2] 0,34cts/mm2 [130cts/ inch2] 0,11 cts/mm2 [71cts/ inch2] 50-303 17-144 Consult us Consult us Yes No 8 24 38 48 PLUG/RECEPTACLE GENDER MODULARITY SIGNAL CONTACTS COUNT LATERAL FLOATMENT FEATURE SEE PAGE "NQIFOPMt#PBSE-FWFM Interconnect products 7 Amphenol Socapex Box Capabilities e a e c e e i e i i i a c e RJ Field DPOTVMUVT 5SBOTGPSNTBMMTUBOEBSEFYJTUJOH3+$BUFDPSETFUJOUPBOFOWJSPONFOUBMDPOOFDUPS XJUIPVUBOZDBCMJOH PQFSBUJPO BOEXJUIPVUBOZUPPM0UIFS*OGPDPNDPOOFDUPSTTVDIBT64% 64## 3+ 3+ *&&& .53+ LC, can also be rugged with the same concept. I/O Cylindrical connectors DPOTVMUVT Amphenol Socapex provides cylindrical I/O front panel connectors per various standards, including MIL DTL 4FSJFT* ** BOE*** )& &/ 7(&/.*-%5-4FSJFT* 7(/VNFSPVT platings and arrangements available, in addition to unique custom design capabilities (snatch release, rack BOEQBOFM IJHIEFOTJUZ 1$UBJMTUBOEPGGT )'DPOUBDUT IZCSJEPQUJDBMFMFDUSJDBMTPMVUJPOT e HDAS Series TFFQBHF e SIAL Series DPOTVMUVT e SMASH Series TFFQBHF i i- SMASH Derivated TFFQBHF High density rack and panel for rectangular in and out solutions. Possibilities of hybrid inserts, EMI shielding, as well as sealing and rear potting. Monolithic high density PCB interconnect. Provides higher current rate capability, and extreme withstanding to harsh environments, such as very high temperature and vibrations level. Modular PCB interconnect, which provides various combinations of both signal and HF contacts inserts. Highly robust advanced SEM E form factor connector. For the most demanding electronic packagings interconnects. Provides lateral floatment capability, and numerous features (Filter, shielding, matched JNQFEBODF EJGGFSFOUJBMQBJSTy 127/HE8 Series TFFQBHF Proven legacy product, which meets various worldwide standard. Various features, including a wide range of hardware and locking devices. i SIHD Series TFFQBHF i Thermal Clamps TFFQBHF Monolithic staggered grid connector, with floating capability feature. Chassis devices, which both help to dissipate components heating and block the daughter cards into the box slots grooves. Printed Circuit Boards for backplanes and daughter cards TFFQBHFT Fabrication capabilities include a wide variety of materials to enable increasing signal speeds, deep NJDSPWJBT CVSJFE CMJOEBOECBDLESJMMFEWJBT TFRVFOUJBMMBNJOBUJPO QBOFMTJ[FTGSPNwYwVQUPwYw and layer counts up to 60 with a board thickness of 0.400". HiLinX Series TFFQBHF 6OJRVF.NPEVMBSJOUFSDPOOFDU4ZTUFNPGJOUFSMPDLJOHTJHOBM QPXFS GJCFSPQUJDT BOE)'NPEVMFT for dedicated board level mixed solution. Rigid and rigid flex PCBs TFFQBHFT Rigid-Flex circuit interconnects featuring blind and buried vias, microvias, bookbinder and other cuttingedge technologies including large format panels. "NQIFOPMt#PBSE-FWFM Interconnect products 48 127 / HE8 the well proven technology The 127 series is a medium-density range of multi-contact plug-in connectors for printe circuit boards. This range of 2.54 [.100] staggered grid, low profile connectors meets the common harsh environmental requirements. A wide range of fittings and guides, as well as numerous contact terminations, provide more flexibility to PCB designers. A well-proven technology t t c 5IFTFSJFTVTFTB<>TUBHHFSFEHSJEQJUDIXJUI<>CFUXFFOSPXT "WBJMBCMFJOPSSPXT The contact technology is based on the tuning fork and blade concept. Using advanced copper alloys provides optimized electrical conductivity as well as long-term mechanical reliability. e a e A large choice of attachments on Printed Circuit Boards t %JoFSFOUTUZMFT GSPNUPDPOUBDUTXJUIWBSJPVTUFSNJOBUJPOTTUSBJHIU SJHIUBOHMFE t 90, crimp barrel, solder cup, SMT and wire-wrapping. Hybrid patterns, with a combination of 3 to 10 special cavities, permit the usage of coaxial, power contacts, as well as optical termini. The 127 series connectors are available in 3 different versions: HE801 / HE804 / HE807 QUICK SELECTION GUIDE Signal contacts a FEMALE MALE Special contacts c Keying & Guiding e POWER 10A NON KEYING HE801 KEYING Round male contact Standard molding size LOCKING POWER 20A NON LOCKING PAGE 53 HE804 Rectangular male contact Molding smaller in size HE807 COAXIAL PAGE 52 Connector type Hybrid cavities PAGE 54 PAGE 56 PAGE 51 The 127 series serves various markets, including: Military avionics & airframe Commercial avionics & airframe C4ISR Ground vehicle Industrial This proven range of PCB connectors complies with numerous international standards: NFC UTE 93424 HE801, HE804 & HE807 BS9525 N0001, F0006, F0007 MIL-DTL-55302 140 to 155 All dimensions are given for information only and are in mm [inch], except as otherwise specified 49 127 Series "NQIFOPMt#PBSE-FWFM Interconnect products )&4FSJFT Proven, reliable and robust rectangular PCB connectors )&QSPEVDUSBOHF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 Signal contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Special contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 Female fittings for receptacles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 Male fittings for plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 5ZQJDBMBSSBOHFNFOUTBOEMBZPVUTTJHOBMDPOOFDUPST )&)& . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 5ZQJDBMBSSBOHFNFOUTBOEMBZPVUTIZCSJEDPOOFDUPST )& . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 Tooling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69 Fittings & contacts compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 All dimensions are given for information only and are in mm [inch], except as otherwise specified "NQIFOPMt#PBSE-FWFM Interconnect products 50 127 / HE8 >>> GENERAL SPECIFICATIONS t t 2.54 [.100] staggered grid (1.27 [.050] offset), 2.54 [.100] between rows Proven, reliable and robust rectangular PCB connectors t t Numerous contact terminations and fittings Hybrid patterns with power or coax contacts Main characteristics Terminations t t t t Density: 0.11 cts/mm2 [71 cts/inch2] 17 to 144 signal contacts 0 to 10 special contacts 3 A per signal contacts t Fully compatible with all the standard connectors HE801, HE804 & HE807 on the market Recommended configurations Markets Standards NFC UTE 93424 HE801, HE804 & HE807 BS9525 N0001, F0006, F0007 Main applications MIL-DTL-55302 140 to 155 How to order YES Hybrid Connector ? NO 3 rows 80/144 NO YES Square fittings? Reference Codable Lockable 'JUUJOHTGPSSFDFQUBDMF 9/PoUUJOHT Yes No K / A / P / B / KE / AE / L S / D / SC / DC No Yes KD / AD / KED / AED / KT / Yes Yes AT / KET / AET 'JUUJOHTGPSQMVH 9-/PoUUJOHT A/J/H/N/V/E/R Yes No PA / PC / T No No D / S / NF / EF / RF No Yes AS / JS / NS / ES / RS / ET / RT Yes Yes C NO YES H T O Socket YC YL T U Y YD W3 Z X1** OO Fittings (see page 56) Signal contacts (see page 52) Nothing / T / H / C 127 - --- --- Contacts Cavities marking* F: Socket / M: Pin O: normal B: reversed - - - - --- - --- - Number of cavities for special contacts (see page 54) Number of signal contacts ) or $ 5 3 rows 0 5 48 56 60 33 65 96 80 144 Special contacts? YES HE807 / 127H / 127C NO Fitting material 17 29 41 53 72 84 Pin Description Right angle PC tail Long right angle PC tail SMT with metallized terminals SMT double sided Straight PC tail Straight PC tail Wire wrap connections ZC Solder on wire X** Crimping tail OO /PTJHOBMDPOUBDUT )& O: nickel over brass 1: passivated stainless steel Stiffening bar YES $POUBDUT Z, ZC, X1, X, W3? NO A: OPTUJoFOJOHCBS Blank: TUJoFOJOHCBS B: TUJoFOJOHCBS Blank: OPTUJoFOJOHCBS OOO Plating 1: Tin lead on YC/Y/ZC/U/ YL/YD & Gold on W3/X/X1 4: #SJHIUQVSFUJO 3P)4 6: Tin lead on W3 3A 6A 7A 8A 10A Version HE804? NO Male contact M? YES YES O R NO N * Asymmetrical arrangements with female contacts always have plug marking. Asymmetrical arrangements with male contacts always have receptacle marking. ** Not available for HE801 and HE807 connectors. All dimensions are given for information only and are in mm [inch], except as otherwise specified "NQIFOPMt#PBSE-FWFM Interconnect products 51 127 / HE8 >>> TECHNICAL SPECIFICATIONS H A E H = 7.9 [.311] for HE801 & HE807 connectors )<>GPS)&DPOOFDUPST "<>GPSSPXDPOOFDUPST "UP<UP>GPSSPXDPOOFDUPST &UP<UP> FEMALE CONTACT 127 Series DIMENSIONAL CHARACTERISTICS 2,54 2,54 1,27 MALE CONTACT Female tuning fork contact t Compatible with other technologies * * For HE801 & HE807 connectors Contact section: NN[.0004 inch] 0,8 [0.031] * * For HE804 connectors Contact section: 0.48mm [.0007 inch] 0,6 [0.024] Material t $V4O1 CMBEF 0,6 [0.024] Plating t Termination: Gold on W3, X & X1 and tin lead or bright pure tin on YD, Y, Z, YC, YL, T & U t Active contact area: Gold Material: $V;O CMBEF Plating t Termination: Gold on W3, X & X1 and tin lead or bright pure tin on YD, Y, Z, YC, YL, T & U t Active contact area: Gold MARKING Plug marking MATERIALS Receptacle marking OVUTGPSNNTDSFXT CSBTTN/ - nuts for O 1.6mm screws, brass m.N ENVIRONMENTAL CHARACTERISTICS Thermal shocks $ Salt Spray hours ELECTRICAL CHARACTERISTICS Current ratingQFSDPOUBDUT " Insulation resistance ( Contact resistance (N Dielectric Withstanding Voltage 7SNT CapacitanceCFUXFFODPOUBDUT Q' Service voltageBU)[ 7SNT Fittings: Electroless nickel over brass or passivated stainless steel t "45. Plastic insert: Thermoset DAP, 30% glass-fiber filled HE801 HE804 HE807 1 MAX 1.60 MAX 1 MAX 1.60 MAX 1 MAX 1.60 MAX 0.14 MIN 500 10 g 100 g 0.14 MIN 500 10 g 100 g 0.14 MIN 10 g 100 g 0.15 0.15 0.15 96 96 1 : When both connectors are fully mated, the backoff is the maximum distance the connectors can be unmated while functioning properly Derating Curve 3.5 96 3 See derating curve 5 MIN MAX 1 000 5 MAX See derating curve 5 MIN MAX 1 000 5 MAX See derating curve 5 MIN MAX 1 000 5 MAX $VSSFOU " MECHANICAL CHARACTERISTICS Backoff1 NN Mating forceQFSDPOUBDU / Unmating force QFSDPOUBDU / Durability cycles Vibrations UP)[ NJDSPEJTDPOUJOVJUZT Shocks NJDSPEJTDPOUJOVJUZT Recommanded tightening torques t 1.5 1 0.5 0 0 50 100 150 5FNQFSBUVSF $ All dimensions are given for information only and are in mm [inch], except as otherwise specified "NQIFOPMt#PBSE-FWFM Interconnect products 52 127 / HE8 >>> SIGNAL CONTACTS (a) a FEMALE CONTACTS Long right angle PC tail e - Thru hole soldering - Single or double sided daughter board 5FSNJOBUJPOTFDUJPOY<Y> 1$#UIJDLOFTTMAX [.098] Termination style A A Right angle PC tail YC SMT single side e Termination style YL SMT double side A A - CMS soldering - Double side daughter board 4VSGBDFNPVOUBSFBY<Y> 1$#UIJDLOFTT<> - CMS soldering - Single side daughter board 4VSGBDFNPVOUBSFBY<Y> e Termination style T Straight PC tail e Termination style A - Hard-soldering on wire - O: 1mm MAX<>PODPSFTFDUJPONN<JODI> - Thru hole soldering - Mother board 5FSNJOBUJPOTFDUJPOY<Y> 1$#UIJDLOFTT<> 5FSNJOBUJPOTFDUJPOY<Y> 1$#UIJDLOFTT<> i U Solder cup A Termination style YD/Y Wire-wrap e Termination style Z Crimp barrel A A - Crimping on wire "8(HBVHFUP - Terminations protected by a casing cemented to the moulding 1$#UIJDLOFTT<> - Wire wrap connections "8(HBVHFUP 5FSNJOBUJPOTFDUJPOY<Y> 1$#UIJDLOFTT<> i - Thru hole soldering - Single or double sided daughter board 5FSNJOBUJPOTFDUJPOY<Y> - PCB thickness: 3.5 MAX [.138] Termination style W3 YC A MAX for HE801/HE807 A MAX for HE804 Active contact area plating m [in] Termination plating m [in] YL e Termination style X1 T U YD Y Z W3 X1 <> <> 4.5 [.177] 14.1 [.555] <> 3 [.118] 4 [.157] 4.7 [.185] 4.9 [.193] 3.8 [.150] <> <> 15 [.591] 8 [.315] <>/J 1 [.040] Au <>/J 1 [.04] Au <>/J 0.2 [.008] Au <>/J UP<UP>4O1C or bright pure Sn for RoHS version All dimensions are given for information only and are in mm [inch], except as otherwise specified "NQIFOPMt#PBSE-FWFM Interconnect products 53 127 / HE8 >>> SIGNAL CONTACTS (a) a MALE CONTACTS Long right angle PC tail e Termination style - Thru hole soldering - Single or double sided daughter board - Termination section: 0.35x0.35[.014x.014] - PCB thickness: 3.7 [.146] A A - Thru hole soldering - Single or double sided daughter board - Termination section: 0.35x0.35[.014x.014] 1$#UIJDLOFTT<> YC Straight PC tail e Termination style A - Mother board i YL SMT double side - Thru hole soldering A 127 Series Right angle PC tail - Termination section: 0.35x035 [.014x.014] 1$#UIJDLOFTT<> Termination style Y Solder cup e - CMS soldering - Double sided daughter board 4VSGBDFNPVOUBSFBY<Y> 1$#UIJDLOFTT<> Termination style U Wire-wrap A - Hard-soldering on wire - O: 1 MAX<>PODPSFTFDUJPONN<JODI> 1$#UIJDLOFTT<> e Termination style ZC A i - Wire wrap connections "8(HBVHFUP 5FSNJOBUJPOTFDUJPOY<Y> 1$#UIJDLOFTT<> Termination style W3 Crimp barrel The mention i or e means the contact removal direction. A - Crimping on wire "8(HBVHFUP - Terminations protected by a casing cemented to the moulding 1$#UIJDLOFTT<> e YC A MAX for HE801/HE807 A MAX for HE804 Active contact area plating m [in] Termination plating m [in] YL Termination style Y U ZC 5.05 [.199] <> 4.3 [.169] <> <> 5 [.197] <> <> <>/J 1 [.040] Au <>/J UP<UP>4O1C or bright pure Sn for RoHS version X W3 X 15.05 [.593] <> <> 8 [.315] <>/J 1 [.040] Au <>/J 0.2 [.008] Au All dimensions are given for information only and are in mm [inch], except as otherwise specified "NQIFOPMt#PBSE-FWFM Interconnect products 54 c 127 / HE8 >>> SPECIAL CONTACTS (c) POWER CONTACTS** Current rating 10A Solder cup Straight PC tail A - Hard soldering on wire 8JSFEJBNFUFSVQUP> - Termination section: O<> - Current rating 10A A A A Pin Socket e M121* F121* Right angle PC tail - Thru hole soldering - Daughter board 5FSNJOBUJPOTFDUJPO<> 1$#UIJDLOFTTUP<UP> - Current rating 10A Pin Socket e M141* F141* Current rating at 5V (A) Maximum current rating at 5V (A) Contact resistance (m) Operating temperature rise (C) Contact retention (N) Insertion and extraction force per contact (N) 10 15 MAX MAX 50 MIN f F 15 A A - Thru hole soldering - Mother board 5FSNJOBUJPOTFDUJPO<> 1$#UIJDLOFTTVQUPMAX<> - Current rating 10A Pin Socket e M132* F132* Current rating 20A Solder cup A Straight PC tail - Hard soldering on wire 8JSFEJBNFUFSVQUP<> $VSSFOUSBUJOH" A e A Pin Socket MH1* FH1* - Thru hole soldering - Daughter board 5FSNJOBUJPOTFDUJPO<> 1$#UIJDLOFTTUP<UP> $VSSFOUSBUJOH" e Pin Socket MH2* FH2* Current rating at 5V (A) Contact resistance (m) Operating temperature rise (C) Contact retention (N) Insertion and extraction force per contact (N) MAX MAX 50 MIN f F 15 A A Right angle PC tail A - Thru hole soldering - Mother board - Termination section: 1.4 [.053] 1$#UIJDLOFTTVQUPMAX<> $VSSFOUSBUJOH" e Pin Socket A MAX Central contact area plating m [in] Other plating area m [in] MH3* FH3* M121/F121 <> M141/F141 3.8 [.150] M132/F132 MH1/FH1 3.8 [.150] <> <>/J 1.2 [.047] Au <>/J 0.4 [.016] Au MH2/FH2 <> MH3/FH3 3.8 [.150] All dimensions are given for information only and are in mm [inch], except as otherwise specified "NQIFOPMt#PBSE-FWFM Interconnect products 55 c 127 / HE8 >>> SPECIAL CONTACTS (c) COAXIAL CONTACTS** B - Thru hole soldering - Daughter board 5FSNJOBUJPOTFDUJPO<> 1$#UIJDLOFTTUP<UP> A A Right angle PC tail - Thru hole soldering - Mother board 5FSNJOBUJPOTFDUJPO<> 1$#UIJDLOFTTMAX<> A A 127 Series Straight PC tail B Pin Socket M041* F041* Straight on flexible cable A Pin Socket M032* F032* Straight on flexible cable - Hard-soldering on flexible cable - Hard-soldering on flexible cable A 8JSFPVUFSEJBNFUFSVQUP<> ,9"3(#6 A A Pin Socket Impedance () Voltage rating (Vrms) Current rating (mA) Contact retention (N) Frequency range (GHz) Contact resistance (m) SWR at 1 GHz Insertion and extraction force per contact (N) M011* F011* Pin Socket M021* F021* COAXIAL CONTACTS 50 180 500 50 MIN 0 to 1 MAX 1.3 MAX 1 F 15 OPTICAL TERMINI Consult us. A MAX B MAX Central contact area plating m [in] Other plating area m [in] M041/F041 3.8 [.150] M021/F021 <> M011/F011 <> M032/F032 <> <> <>/J 1.2 [.047] Au <>/J 0.4 [.016] Au * Coaxial contacts and power contacts have to be ordered separately against the here above part number. Example: F011 ** These contacts can be mounted in all types of connectors 127H-127C/HE807. All dimensions are given for information only and are in mm [inch], except as otherwise specified "NQIFOPMt#PBSE-FWFM Interconnect products 56 127 / HE8 >>> FEMALE FITTINGS (e) END FITTINGS FOR RECEPTACLES** e Codable & Non lockable fittings K A - Chassis or mother board - Fixed receptacle Compatibility - Female contact: 801 / 804 / 807 - Male contact: 807 E C D C - Nickel over brass* D - Nickel over brass* HE 801/ 807 HE 804 -Chassis or mother board - Fixed receptacle Compatibility - Male contact: 801 / 804 E EF 212 201 CF 229 202 P HE 801 HE 804 EF 212 201 CF 229 202 B - Chassis - Floating receptacle Compatibility - Female contact: 801 / 804 E ABC ABC - Nickel over brass* D HE 801 HE 804 - Chassis - Floating receptacle Compatibility - Female contact: 801 / 804 E EF 203 203 - Nickel over brass* CF 202 202 P D HE 801 HE 804 EF CF 203 202 203 202 L - Chassis - Floating receptacle Compatibility - Female contact: 807 - Male contact: 807 E AB F D A C - Nickel over brass * - Nickel over brass * HE 807 - Chassis or mother board - With insulating washer Compatibility - Female contact: 804 D E EF 226 CF 202 KE HE 804 EF CF 228 202 AE G A D H A' E - Daughter board or board to board mating - Free receptacle - with bracket - Connection board to board aligned with each other Compatibility - Female contact: 801 / 807 - Male contact: 807 G A D H A' - Nickel over brass * F HE 801 HE 807 E - Daughter board or board to board mating - Free receptacle - with bracket - Connection board to board aligned with each other Compatibility - Male contact: 801 - Nickel over brass * F EF 208 208 CF 209 208 KE HE 801 EF 208 CF 209 AE - Daughter board or board to board mating - Free receptacle - with bracket - Connection board to board aligned with each other Compatibility - Female contact: 804 G A B E A' F - Nickel over brass * HE 804 EF: End Fitting / CF: Central Fitting EF 209 CF 209 - Daughter board or board to board mating - Free receptacle - with bracket - Connection board to board aligned with each other Compatibility - Male contact: 804 G A B E A' F - Nickel over brass * HE 804 EF CF 209 209 All dimensions are given for information only and are in mm [inch], except as otherwise specified "NQIFOPMt#PBSE-FWFM Interconnect products 57 127 / HE8 >>> FEMALE FITTINGS (e) END FITTINGS FOR RECEPTACLES** e Non codable & lockable fittings D - Cables, free receptacle - Locking device-extractor - tapped female fitting - Locking and unlocking shall be carried out simultaneously at both ends Compatibility - Female contact: 801 / 804 - Cables, free receptacle - Locking device-extractor - tapped female fitting - Locking and unlocking shall be carried out simultaneously at both ends Compatibility - Male contact: 801/ 804 D A A D - Nickel over brass * - Nickel over brass * EF 219 220 HE 801 HE 804 CF 229 202 SC HE 801 HE 804 EF 219 220 CF 229 202 EF 207 CF 202 EF 213 CF 229 DC - Cables, free receptacle - Flex, locking device-extractor Compatibility - Female contact: 804 E A E A - Nickel over brass * - Cables, free receptacle - Flex, locking device-extractor Compatibility - Male contact: 804 - Nickel over brass * D EF 207 HE 804 D CF 202 SC HE 804 DC - Chassis, floating receptacle - Locking device-extractor Compatibility - Female contact: 801 E A E A - Nickel over brass * - Chassis, floating receptacle - Locking device-extractor Compatibility - Male contact: 801 - Nickel over brass * D D EF 213 HE 801 CF 229 HE 801 S - Chassis, floating receptacle - Locking device-extractor - tapped female fitting - Locking and unlocking shall be carried out simultaneously at both ends Compatibility - Female contact: 807 - Male contact: 807 E A D A D E S 219 D 219 220 220 O<> 4.7 MAX [.185] SC 207 DC 207 SC DC 213 213 O<> 6 MAX<> MAX [.083] L 228 Hex 5 [.197] KE 208 AE 208 O 3.5 [.138] .<> S 213 - Nickel over brass * EF 213 HE 807 K 212/201 A A' B C D E F G H A 212/201 .<> 6 MAX<> MAX<> CF 229 P 203 B 203 O<> P 226 O<> O 4.5 [.177] .<> <> <> Hex 4.5 [.177] <> MAX [.083] <> .<> 6 MAX<> MAX [.106] KE 209 AE 209 O 3.5 [.138] Hex 4 [.157] 1 MAX [.039] 4.6 [.181] UP<UP> <> <> MAX<> MAX<> <> 5PPSEFSUIFTBNFoUUJOHJOQBTTJWBUFETUBJOMFTTTUFFM DIBOHFUIFiwJOUIF)&SFGFSFODFUPBiw YYYY 5PPSEFSUIFoUUJOHBMPOF)&$ YYY EF: End Fitting / CF: Central Fitting All dimensions are given for information only and are in mm [inch], except as otherwise specified 127 Series S "NQIFOPMt#PBSE-FWFM Interconnect products 58 127 / HE8 >>> FEMALE FITTINGS (e) END FITTINGS FOR RECEPTACLES** e Codable & lockable fittings KD AD - Chassis or mother board - Fixed receptacle - Locking ensuring resistance to vibrations Compatibility - Female contact: 801 / 804 / 807 - Male contact: 807 E D A C A' - Chassis or mother board - Fixed receptacle - Locking ensuring resistance to vibrations Compatibility - Male contact: 801 / 804 E D A C A' - Nickel over brass* - Nickel over brass* HE8C213 HE8C213 EF CF 221 229 221 202 HE 801 / 807 HE 804 KED HE 801 / 804 HE 804 EF CF 221 229 221 202 AED - Daughter board - Free receptacle - with bracket - Connection board to board aligned with each other - Locking ensuring resistance to vibrations Compatibility - Female contact: 804 D A C E C' - Daughter board - Free receptacle - with bracket - Connection board to board aligned with each other - Locking ensuring resistance to vibrations Compatibility - Male contact: 804 D A C E C' - Nickel over brass* - Nickel over brass* EF CF 223 209 HE 804 KED HE 804 EF 223 CF 209 AED D A C D' A' - Daughter board - Free receptacle - with bracket - Connection board to board aligned with each other - Locking ensuring resistance to vibrations Compatibility - Female contact: 801 / 807 - Male contact: 807 D A C D' A' - Daughter board - Free receptacle - with bracket - Connection board to board aligned with each other- Locking ensuring resistance to vibrations Compatibility - Male contact: 801 - Nickel over brass * - Nickel over brass * EF CF 224 209 224 208 HE 801 HE 807 KT HE 801 EF 224 CF 209 AT - Chassis or mother board - Fixed receptacle - Quarter turn locking on plug side - Female contact: 801 / 804/ 807 Compatibility - Male contact: 807 D A C - Chassis or mother board - Fixed receptacle - Quarter turn locking on plug side Compatibility - Male contact: 801/ 804 D A C - Passivated stainless steel only - Passivated stainless steel only EF CF 422 429 422 402 HE 801/ 807 HE 804 KET HE 801 HE 804 EF 422 422 CF 429 402 AET - Daughter board or board to board mating - Free receptacle - Quarter turn locking on plug side Compatibility - Female contact: 801/ 804/ 807 - Male contact: 807 D A C A' EF: End Fitting / CF: Central Fitting A C A' - Passivated stainless steel only HE 801/804/807 - Daughter board or board to board mating - Free receptacle - Quarter turn locking on plug side Compatibility - Male contact: 801/ 804 D EF CF 425 425 - Passivated stainless steel only HE 801/804 EF 425 CF 425 All dimensions are given for information only and are in mm [inch], except as otherwise specified "NQIFOPMt#PBSE-FWFM Interconnect products 59 127 / HE8 >>> FEMALE FITTINGS (e) CENTRAL FITTINGS FOR RECEPTACLES** e 202 Compatibility - Female contact: 801 / 807 - Male contact: 801/ 807 - EF: K / A / P / B / S / D / SC / DC / KD / AD D A Compatibility - Female contact: 804 - Male contact: 804 - EF: K / A / P / B / L / S / D / SC / DC / KD / AD D A - Nickel over brass * HE 801/807 - Nickel over brass * HE 804 229 429 202 402 Compatibility - Female contact: 801 / 807 - Male contact: 801 / 807 - EF: KT / AT D A Compatibility - Female contact: 804 - Male contact: 804 - EF: KT / AT D A - Passivated stainless steel * HE 801 / 807 - Passivated stainless steel * HE 804 429 208 402 209 Compatibility - Female contact: 801 / 807 - Male contact: 801 / 807 - EF: KE / AE / KED / AED G A D H A' E F Compatibility - Female contact: 804 - Male contact: 804 - EF: KE / AE / KED / AED G A B - Nickel over brass * E HE 801 / 807 - Nickel over brass * A' F HE 804 208 202 / 229 / 429 / 402 425 D A C HE 801/ 804 / 807 425 Hex 5 [.197] 4.6 [.181] 4.1 MAX [.161] UP<UP> E CF 208 209 O 3.5 [.138] 1 MAX [.039] 7 MAX<> <> F EF 224 208 B D - Passivated stainless steel * A' O 4 [.157] A Compatibility - Female contact: 801 / 804 / 807 - Male contact: 801 / 804 / 807 - EF: KET / AET 209 <> MAX<> G H <> A' .<> Hex 4 [.157] KD / AD 221 X HE804 = 18 MAX [.709] Y HE804MAX<> Z HE804 = 14 MAX [.551] X HE801/807 = 17 MAX [.669] Y HE801/807MAX [.988] Z HE801/807 = 13 MAX<> KT / AT 422 KET / AET 425 Hex 5 [.197] O 3.5 [.138] O 3.5 [.138] Z = 14 MAX [.551] Z = 13 MAX<> .<> HE804: 7 MAX<> HE801/807: 6 MAX<> 4.1 MAX [.161] 4.6 [.181] D' E MAX A' Hex 5 [.197] C' KED / AED 224 O 5 [.197] .<> C D KED / AED 223 O5 [.197] A Hex 4 [.157] .<> C UP<UP> .<> Hex 4 [.157] O1.6 [0.63] 5PPSEFSUIFoUUJOHBMPOF)&$ YYY 5PPSEFSUIFTBNFoUUJOHJOQBTTJWBUFETUBJOMFTTTUFFM DIBOHFUIFiwJOUIF)&SFGFSFODFUPBiw YYYY 5PPSEFSUIFTBNFoUUJOHJOOJDLFMPWFSCSBTT DIBOHFUIFiwJOUIF)&SFGFSFODFUPBiw YYYY x: unlocked - y: screw out - z: locked EF: End Fitting / CF: Central Fitting All dimensions are given for information only and are in mm [inch], except as otherwise specified 127 Series 229 "NQIFOPMt#PBSE-FWFM Interconnect products 60 127 / HE8 >>> MALE FITTINGS (e) END FITTINGS FOR PLUGS** e Non codable & Non lockable fittings PA PC C - Daughter board or extension board single or double sided - Free plug - with plated thru holes Compatibility - Female contact: 801 / 804 / 807 - Male contact: 807 D C D - Nickel over brass * - Nickel over brass * A HE 801/ 804/ 807 A EF CF 102 102 - Chassis or mother board - Board to board, board to chassis, parallel to one another Compatibility - Female contact: 801/ 804/ 807 - Male contact: 801/ 804 / 807 A C EF CF 102 102 HE 801 /804 T D - Daughter board or extension board single or double sided - Free plug - with plated thru holes Compatibility - Male contact: 801 / 804 PA / PC T A Hex 4 [.157] Hex 5 [.197] C UP<UP> .<> D 1.3 MAX [.051] 6 MAX<> - Nickel over brass * HE 801/807 HE 804 EF CF 118 129 111 113 Non codable & Non locking fittings D S C - Daughter board single or double sided - Free plug - with plated thru holes - Lockable on receptacle side Compatibility - Female contact: 801/ 804 / 807 - Male contact: 807 D A C D A - Nickel over brass * HE 801/804/807 - Nickel over brass * EF CF 103 102 EF - Daughter board single or double sided - Free plug - with plated thru holes - Lockable on receptacle side Compatibility - Male contact: 801/ 804 EF CF 103 102 HE 801/ 804 RF - Chassis or mother board - Board to board, board to chassis, parallel to one another, board to cable or chassis to cable - Lockable on receptacle side Compatibility - Female contact: 801 / 804 / 807 - Male contact: 807 D A C F - Chassis or mother board - Free plug - with plated thru holes - Lockable on receptacle side Compatibility - Male contact: 801 / 804 D A C - Nickel over brass * F - Nickel over brass * HE 801/ 807 HE 804 EF CF 119 129 112 113 NF D/S C G D F - SMT daughter board aligned with connector centerline - Lockable on receptacle side Compatibility - Female contact: 801 / 804 - Male contact: 801 / 804 EF CF 119 129 112 113 HE 801 HE 804 EF RF Hex 4 [.157] Hex 5 [.197] C UP<UP> . [.197] 1.6 [.063] D 1.3 MAX [.051] 6 MAX<> HE801 13.9 MAX [.547] )&MAX [.480] - Nickel over brass * HE 801 HE 804 EF: End Fitting / CF: Central Fitting EF CF 116 114 108 104 NF A F G MAX<> 1.1 [.043] 3.5 [.138] All dimensions are given for information only and are in mm [inch], except as otherwise specified "NQIFOPMt#PBSE-FWFM Interconnect products 61 127 / HE8 >>> MALE FITTINGS (e) END FITTINGS FOR PLUGS** e Codable & Non lockable fittings J - Daughter board single or double sided - Free plug - with plated thru holes Compatibility - Female contact: 801 / 804 / 807 - Male contact: 807 C A D - Daughter board single or double sided - Free plug - with plated thru holes Compatibility - Male contact: 801 / 804 C A - Nickel over brass * HE 801/ 804/ 807 D Nickel over brass * EF CF 101 102 N EF 101 HE 801 /804 CF 102 V C G D F - SMT daughter board aligned with connector centreline - Free plug - with plated thru holes Compatibility - Female contact: 801 / 804 - Male contact: 801 / 804 C G F D - Nickel over brass * HE 801 HE 804 - SMT daughter board aligned with connector centreline - Free plug - with plated thru holes Compatibility - Female contact:: 801 / 804 - Male contact: 801 / 804 - Nickel over brass * EF CF 115 114 106 104 E EF CF 114 114 104 104 HE 801 HE 804 R - Chassis or mother board - Board to board, board to chassis Compatibility - Female contact: 801/ 804 / 807 - Male contact: 807 D A C - Chassis or mother board (board to CPBSE CPBSEUPDIBTTJT Compatibility - Male contact: 801 / 804 D A C - Nickel over brass * - Nickel over brass * F HE 801 /807 HE 804 EF 117 110 F CF 129 113 H A C G D F - SMT daughter board 0oTFUGSPNDPOOFDUPSDFOUSFMJOF - Free plug - with plated thru holes Compatibility - Female contact: 804 EF CF 107 105 J N V E R CF 129 113 H A Hex 4 [.157] C UP [0.63 to 0.94] 1.6 [0.63] .<> 1.6 [0.63] D 1.3 MAX [.051] HE801 13.9 MAX [.547] )&MAX [.480] 6 MAX<> 13.05 MAX [.514] F 1.1 [.043] MAX<> G 3.5 [.138] - Nickel over brass * HE 804 EF 117 110 HE 801 HE 804 Hex 5 [.197] 1.1 [.043] <> 5PPSEFSUIFTBNFoUUJOHJOQBTTJWBUFETUBJOMFTTTUFFM DIBOHFUIFiwJOUIF)&SFGFSFODFUPBiw YYYY 5PPSEFSUIFoUUJOHBMPOF)&$ YYY EF: End Fitting / CF: Central Fitting All dimensions are given for information only and are in mm [inch], except as otherwise specified 127 Series A "NQIFOPMt#PBSE-FWFM Interconnect products 62 127 / HE8 >>> MALE FITTINGS (e) END FITTINGS FOR PLUGS** e Codable & lockable fittings AS JS C - Daughter board single or double sided - Free plug - with plated thru holes - Lockable on receptacle side Compatibility - Female contact: 801 / 804 / 807 - Male contact: 807 D A C - Daughter board single or double sided - Free plug - with plated thru holes - Lockable on receptacle side Compatibility - Male contact: 801 / 804 D A - Nickel over brass * - Nickel over brass * EF 124 HE 801/ 804/ 807 CF 102 ES EF 124 HE 801 /804 CF 102 RS - Chassis or mother board - Board to board, board to chassis, parallel to one another, board to cable or chassis to cable - Lockable on receptacle side Compatibility - Female contact: 801/ 804 / 807 - Male contact: 807 D A C F - Chassis or mother board - Board to board, board to chassis, parallel to one another, board to cable or chassis to cable - Lockable on receptacle side Compatibility - Male contact: 801 / 804 D A C F - Nickel over brass * - Nickel over brass * EF CF 125 129 125 113 HE 801 HE 804 ET EF 125 125 HE 801 HE 804 CF 129 113 RT - Cable to board or cable to chassis - Quarter turn locking - Dimensions given in reset position Compatibility - Female contact: 801/ 804 / 807 - Male contact: 807 D A - Cable to board or cable to chassis - Quarter turn locking - Dimensions given in reset position Compatibility - Male contact: 801/ 804 D A - Passivated stainless steel only - Passivated stainless steel only HE 801/807 HE 804 EF 327 327 CF 329 313 NS AS C G D F - SMT daughter board aligned with fitting centerline - Lockable on receptacle side Compatibility - Female contact: 801 / 804 - Male contact: 801 / 804 - Nickel over brass * HE 801 HE 804 EF: End Fitting / CF: Central Fitting CF 114 104 JS ES RS A Hex 4 [.157] Hex 5 [.197] C UP [.063 to .094] .<> D 1.3 MAX [.051] 7 MAX<> F EF 114 126 EF 327 327 HE 801 HE 804 G ."9 ET RT CF 329 313 NS <> 1.6 [.063] 16 MAX [.630] HE801 13.9 MAX [.547] )&MAX [.480] 1.1 [.043] 3.5 [.138] All dimensions are given for information only and are in mm [inch], except as otherwise specified "NQIFOPMt#PBSE-FWFM Interconnect products 63 127 / HE8 >>> MALE FITTINGS (e) CENTRAL FITTINGS FOR PLUGS** e 104 Compatibility - Female contact: 801 - Male contact: 801 - N / V / NF / NS - Nickel over brass * HE 801 A G F D A G D F 114 129 Compatibility - Female contact: 804 - Male contact: 804 - N / V / NF / NS - Nickel over brass * HE 804 104 Compatibility - Female contact: 804 - Male contact: 804 - E / R / T / EF / RF / ES / RS - Nickel over brass * HE 804 113 Compatibility - Female contact: 804 - Male contact: 804 - ER / RT - Passivated stainless steel * HE 804 313 113 Compatibility - Female contact: 801 / 807 - Male contact: 801 / 807 - E / R / T / EF / RF / ES / RS - Nickel over brass * HE 801/807 D A D A 129 329 313 Compatibility - Female contact: 801/ 807 - Male contact: 801/ 807 - ER / RT -Passivates stainless steel * HE 801/ 807 D A D A 329 102 105 F Compatibility - Female contact: 801 / 804 / 807 - Male contact: 801 / 804 / 807 "+1"1$%4"4+4 - Nickel over brass * HE 801/ 804/ 807 D A Compatibility - Female contact: 804 -H - Nickel over brass * A G D F 102 HE 804 114 A D 104 1.6 [.063] 13.9 MAX [.547] MAX [.480] F 1.1 [.043] G 3.5 [.514] 129 113 329 313 105 102 105 O 4 [.157] Hex 4 [.157] 1.1 [.043] 7 MAX<> 1.3 MAX [.051] MAX [.480] UP [.063 to .094] 1.6 [.063] <> 5PPSEFSUIFoUUJOHBMPOF)&$ YYY 5PPSEFSUIFTBNFoUUJOHJOQBTTJWBUFETUBJOMFTTTUFFM DIBOHFUIFiwJOUIF)&SFGFSFODFUPBiw YYYY 5PPSEFSUIFTBNFoUUJOHJOOJDLFMPWFSCSBTT DIBOHFUIFiwJOUIF)&SFGFSFODFUPBiw YYYY All dimensions are given for information only and are in mm [inch], except as otherwise specified 127 Series 114 "NQIFOPMt#PBSE-FWFM Interconnect products 64 127 / HE8 >>> HE 801 & HE 804 TYPICAL ARRANGEMENTS n indicates the total number of signal contacts Signal contacts on 2 rows without central fitting* O PS B A B C D E A C D E 6.3 O 9 # # % Signal contacts on 2 rows with central fittings * B O PS B ** A B D E A B B D/2 D/2 D E 6.3 O 9 9 # % Signal contacts on 3 rows without central fittings * n = 80 E A F C D GFNBMFDPOOFDUPS PS GFNBMFDPOOFDUPS 66.04 76.3 MAX 83.4 MAX 3.1 A C D E F Signal contacts on 3 rows with central fittings * n = 144 E B B D/2 D/2 F A ** A B D E F 8.4 MAX 137.16 144.36 MAX 3.1 Panel drilling* L Receptacle with A-AD-AT fittings or plug with R-RF-RS-T fittings with male contact W3-ZC-X t Receptacle with K-KD-KT-L fittings or plug with E-EF-ES-T fittings with female contact W3-Z = = R t h D L h R See above D - 4.6 9.5 MIN MIN D t t L = = R h Receptacle with B fitting and male contact W3-ZC-X Receptacle with P fitting and female contact W3-Z D L h See above D - 4.6 9.5 MIN R D * in mm: 1mm = 0.03937 inch ** The standard version presents a stiffening bar with W3-ZC-Z contacts and no stiffening bar with YC-V-Y-YD-X contacts. Put an A in the part number code to have no stiffening bar on the connector with W3-ZC-Zcontacts or a B to have a stiffening bar on the connector with YC-U-Y-YD-X contacts. All dimensions are given for information only and are in mm [inch], except as otherwise specified "NQIFOPMt#PBSE-FWFM Interconnect products 65 1,27 2,54 2,54 127 / HE8 >>> HE 801 & HE 804 LAYOUTS The boards are shown from the connector side. The drawings show various footprints for connectors with a central attachment on board. 'PSTNBMMFSDPOOFDUPST BOEDPOUBDUT PNJUUIFDFOUFSESJMMJOH All contacts outputs are equidistant. For daughterboard, the first contact's marking is indicated for reference only. d2 P/2 P d2 h R1 d1 d1 P t 3FDFQUBDMFXJUI,&5"&5oUUJOHTPSQMVHXJUI"%"41"+4+41$oUUJOHT d2 t :$ NBMFBOEGFNBMFDPOUBDU d2 t t Plug with H-N-NF-NS-V fittings 6 NBMFBOEGFNBMFDPOUBDU 127 Series Daughterboard drilling for YC contact* R2 D/2 D/2 D Daughterboard drilling for U contact* d2 P d1 h d1 u 4 R1 D/2 D/2 D Daughterboard drilling for YC contact* d2 P/2 d1 R2 d1 d2 P/2 h h4 P/2 t Receptacle with KE-KED-AE-AED fittings t :$ NBMFBOEGFNBMFDPOUBDU t Receptacle with A-AD-AT fittings or plug with R-RF-RS-T fittings t : NBMFBOEGFNBMFDPOUBDU t t Receptacle with K-L-KD-KT fittings or plug with E-EF-ES-T fittings :% GFNBMFDPOUBDUPOMZ P 0 R1 D/2 D/2 D Motherboard drilling for Y contact (male and female)* d2 P/2 d1 d2 d1 P/2 P/2 R1 R2 D/2 D/2 D Motherboard drilling for YD contacts (socket only)* d2 P/2 d1 d1 d2 h2 h1 R1 R2 D/2 D/2 D D d1 d2 p p/2 h h1 h2 h4 R0 See above 3.81 [.150] 5.08 <> [.100] [.050] 3 MAX [.118] 1.9 [.075] 0.64 <> 8 MAX [.315] O 1.8 MIN [.071] * in mm: 1mm = 0.03937 inch R1 R2 R4 u MIN <> O 0.75 MIN [.030] MIN [.094] [.063 > All dimensions are given for information only and are in mm [inch], except as otherwise specified "NQIFOPMt#PBSE-FWFM Interconnect products 66 127 / HE8 >>> HE 807 TYPICAL ARRANGEMENTS n indicates the total number of signal contacts h indicates the total number of hybrid contacts n signal contacts + 3 cavities without central fittings* D B arrangements: 5 + 3 ; 17 + 3 ; 29 + 3 ; 41 + 3 ; 53 + 3 Note: t Asymmetrical arrangements with female contacts always have plug marking t Asymmetrical arrangements with male contacts always have receptacle marking A C t O PS t h=3 O 9 O Y % B D E E n signal contacts + 6 cavities without central fittings* t t B O PS h=6 O 9 O Y % B D E A C E n signal contacts + 3 cavities with central fittings* A D/2 D/2 D E Note: t Asymmetrical arrangements with female contacts always have plug marking t Asymmetrical arrangements with male contacts always have receptacle marking t t O PS h=3 6.3 O Y % A D E n signal contacts + 6 cavities with central fittings* t A D/2 O t h=6 A D E D/2 D E 6.3 O Y % Panel drilling* L = = R h t Receptacle with K-KD-KT fittings or plug with E-EF-ES fittings and male contacts W3-ZC-X and special contacts t Receptacle with K-KD-KT fittings or plug with E-EF-ES fittings and female contacts W3-ZC-X1 and special contacts t '. '. D t Receptacle with P fitting with male contacts W3-ZC-X and special contacts t Receptacle with P fitting with female contact W3-ZC-X1 and special contacts t '. '. L = = R h D * in mm: 1mm = 0.03937 inch '. ').) D L h R D L h '. ').) See above D - 4.6 9.5 MIN OMIN See above D - 4.6 9.5 MIN O R All dimensions are given for information only and are in mm [inch], except as otherwise specified "NQIFOPMt#PBSE-FWFM Interconnect products 67 1,27 2,54 2,54 127 / HE8 >>> HE 807 LAYOUTS COAXIAL CONTACTS Daughterboard drilling YC + F032/M032 contacts* d1 P R1 R2 d1 d1 d2 t t Receptacle with KET fittings or plug A-D-AS-PA :$DPBYJBM'.DPOUBDUT NBMFGFNBMF t Receptacle KE t :$DPBYJBM'.DPOUBDUT NBMFGFNBMF t Receptacle IE t :$DPBYJBM'.DPOUBDUT NBMFGFNBMF t t Receptacle with K-KD-KT fittings and plug E-EF-ES-T fittings. :DPBYJBM'.DPOUBDUT NBMFGFNBMFDPOUBDUT P/2 d2d2 R2 h0 PP 127 Series d2 P/2 D Daughterboard drilling YC + F032/M032 contacts* R1 d1 d1 P P/2 P/2 h d1 d2 d2 d2d2d2 P/2 R2 D Daughterboard drilling YC + F032/M032 contacts* R1 d1 d1 d1 d2 d2 h2 P h1 d2d2d2 P/2 R2 D Motherboard drilling Y + F041/M041 contacts* R1 d1 d2 d1 P P/2 R2 d2d2d2 P d2 D Contact F041/M041 Contact F032/M032 P d2 d2 P/2 P d2d22d12d1d2d2 P d2d22d12d1d2d2 D d1 d2 p p/2 h0 h1 h2 See above 3.81 [.150] 5.08 <> [.100] [.050] 3 MAX [.118] 1.9 [.075] <> * in mm: 1mm = 0.03937 inch R1 R2 MIN O 0.75 MIN <> [.030] h 9.35 [.368] All dimensions are given for information only and are in mm [inch], except as otherwise specified "NQIFOPMt#PBSE-FWFM Interconnect products 68 1,27 2,54 2,54 127 / HE8 >>> HE 807 LAYOUTS. POWER CONTACTS. Daughterboard drilling YC + FH3/MH3 & F132/M132 P/2 P d1 d1 d3 d2d2d2 t t Receptacle with KET fitting & plug with A-D-AS-PA fittings :$QPXFS').)'.DPOUBDUT NBMFGFNBMF t Receptacle with KE fitting t :$QPXFS').)'.DPOUBDUT NBMFGFNBMF t t Receptacle with IE fitting :$QPXFS').)'.DPOUBDUT NBMFGFNBMF t 3FDFQUBDMFXJUI,,%,5oUUJOHXJUI:QPXFS').)' .DPOUBDUT NBMFGFNBMF 1MVHXJUI&&'&45oUUJOHTXJUI:QPXFS').)'. P d2 h0 h3 R2 R1 R3 D Daughterboard drilling YC + FH3/MH3 & F132/M132 d1 d2d2d2d3 d1 d2 P P/2 P/2 P/2 h R1 P/2 R2 R3 D Daughterboard drilling YC + FH3/MH3 & F132/M132 R1 h2 h d2 d2d2d3 d1 d1 d2 P h2 R3 P/2 R2 h1 D Daughterboard drilling Y + FH2/MH2 & F141/M141 R1 d2d2d2d3 d1 d1 d2 P P/2 R3 P/2 t DPOUBDUT NBMFGFNBMF P/2 R2 D D d1 d2 d3 p p/2 h0 h1 h2 h3 See above 3.81 [.150] 5.08 <> 6.35 <> [.100] [.050] 3 MAX 1.9 [.075] 0.64 <> [.300] [.118] R1 R2 R3 MIN O 0.75 MIN O 1.5 MIN <> [.030] [.059] h 9.35 [.368] All dimensions are given for information only and are in mm [inch], except as otherwise specified "NQIFOPMt#PBSE-FWFM Interconnect products 69 127 / HE8 >>> TOOLING REMOVAL TOOLS 24098 - Pin: ZC / X / YC / YL - Rear release Part number - Pin Y / W3 / U - Front release 1272 1271 Part number 24098 24099 4PDLFU:$6; )&)& - Rear release Part number 4PDLFU:$6; )& - Rear release 1271 20973 Part number 24099 20143 - Socket: W3 - Rear release Part number - Socket: Y / YD - Front release 20973 Part number 20143 23550 - Socket: particular contacts HE 807 - Rear release Part number 23550 CRIMPING TOOLS HE 8 20 051 809801 - Socket: X1 "8(UP "EEJUJPOBMUVSSFU .JMJUBSZSFGFSFODF. - Pin: X "8(UP - No additional turret Part number HE 8 20 051 Part number 809801 All dimensions are given for information only and are in mm [inch], except as otherwise specified 127 Series 1272 "NQIFOPMt#PBSE-FWFM Interconnect products 70 127 / HE8 >>> FITTINGS & CONTACT COMPATIBILITIES FEMALE FITTING RECEPTACLE HE801 X RT X JS NS RS NF RF T FEMALE CONTACTS X X X X X X X X X X X X X X X X X X X X X YD X1 X Z X X Y W3 A B U X X X X X X X X X X YC X X X X Connector with male contacts X X X X X X X X AD COMPATIBLE FEMALE FITTINGS X YL X X AT AET X X T X X AED X X X AE D DC X X X S J PC N V R X X X X X X X X X X X X X AET KET AT KT AED KED AD KD DC SC D S L AE KE B P A K A J PA PC H N V E R T D S NF EF RF AS JS NS ES RS ET RT MALE FITTING PLUG COMPATIBLE MALE FITTINGS Connector with male contacts COMPATIBLE MALE FITTINGS Connector with female contacts X X X X X X X X X X X X X X X X X X X YC YL X X X X X X X X U X X X X X X X X Y W3 ZC X D NF EF A PA N V E T MALE CONTACTS KE X X X X X X X X X S SC X X X AS NS ES K P X X X ET X X X X KD X KED X X X X X X X KT KET COMPATIBLE FEMALE FITTINGS Connector with female contacts "NQIFOPMt#PBSE-FWFM Interconnect products 71 127 / HE8 >>> FITTINGS & CONTACT COMPATIBILITIES FEMALE FITTING RECEPTACLE HE804 RT X JS NS RS NF RF T FEMALE CONTACTS X X X X X X X X X X X X X X X X X X X X X X YD X1 X Z X X Y W3 A B U X X X X X X X X X X YC X X X X Connector with male contacts X X X X X X X X AD COMPATIBLE FEMALE FITTINGS X YL X X AT AET X T X X AED X X X X AE D DC X X X X X X X S J PC N V R X X X X X X X X X X X X X AET KET AT KT AED KED AD KD DC SC D S L AE KE B P A K A J PA PC H N V E R T D S NF EF RF AS JS NS ES RS ET RT COMPATIBLE MALE FITTINGS Connector with female contacts X X X X X X X X X X X X X X X X X X X X X X YC YL X X X X U X X X X X X X X Y W3 ZC X D NF EF A PA N V E T MALE CONTACTS KE X X X X X X X X X S SC X X X AS NS ES K P X X X ET X X X X KD X KED X X X X X X X KT KET COMPATIBLE FEMALE FITTINGS Connector with female contacts 127 Series X MALE FITTING PLUG COMPATIBLE MALE FITTINGS Connector with male contacts "NQIFOPMt#PBSE-FWFM Interconnect products 72 127 / HE8 >>> FITTINGS & CONTACT COMPATIBILITIES FEMALE FITTING RECEPTACLE HE807 X ET X X X X X X X X AS ES X X X X X D EF X A PA E T FEMALE CONTACTS X X X X X X X X X X X YD X1 X Z X W3 X Y U X X T X YL X YC X X X X K P KE X X X X X X X X X X X X X S X X X X X X KD KED KT KET COMPATIBLE FEMALE FITTINGS Connector with male contacts X X X X X X X X X X AET KETX AT KT AED KED AD KD DC SC D S L AE KE B P A K A J PA PC H N V E R T D S NF EF RF AS JS NS ES RS ET RT MALE FITTING PLUG COMPATIBLE MALE FITTINGS Connector with male contacts COMPATIBLE MALE FITTINGS Connector with female contacts X X ET X X X X X AS ES X X X X X D EF X X X YC X YL X X X X X X X U X X X X X Y X W3 X ZC X X A PA E T MALE CONTACTS K P KE X X X X X X X X X X X X X X S X X KD X X X X X X X KED KT KET COMPATIBLE FEMALE FITTINGS Connector with female contacts "NQIFOPMt#PBSE-FWFM Interconnect products 73 127 Series NOTES All dimensions are given for information only and are in mm [inch], except as otherwise specified 74 "NQIFOPMt#PBSE-FWFM Interconnect products Other Amphenol Board Level Interconnect BRISTLE BRUSH BUNCH B3 CONTACT INTERCONNECTS Greenbrush Low mating force connector Amphenol's Low Mating Force Connectors are well known in the connector arena - with proven performance on the ground, in the air, and at sea. - In service for over ZFBST XJUI PWFS NJMMJPO CSVTI DPOUBDUT GJFMEFE BOE RVBMJGJFE GPS VTF PO ." "CSBNT ''BMDP '"3BQUPS '-JHIUOJOH** "*."43"".BOENBOZNPSF applications. HDB3 CONNECTORS The new connector series of brush connectors incorporates an even higher density contact pattern and lower mated height than Amphenol's standard low mating force rectangular connectors. These HDB3 connectors utilize the same durable and reliable B3 brush contact, but in a tighter .070 inch X .060 inch staggered grid spacing. They offer the advantage of a higher density pattern in a compact-height connector that will take up less board space; thus saving cost over adding additional connectors to meet power requirements. HDB3 connector styles include mother board, daughter board, input/output and a stacker style. HSB3 CONNECTORS The HSB3 is a further new development of the higher density HDB3 connector series. The HSB3 offers higher speed as well as higher density. Benefits include: "MMPXT EBUB SBUFT VQ UP (CT WJB PIN NBUDIFE JNQFEBODF EJGGFSFOUJBM t pairs Uses partially populated HDB3 mother board and daughter board inserts. See t HSB3 arrangements below. 'PSNPSFJOGPSNBUJPO SFGFSUP"NQIFOPMCSPDIVSF4- POMJOFBUXXXBNQIFOPM aerospace.com. or call 800-678-0141 and ask for Amphenol board level product marketing for assistance. "NQIFOPMt#PBSE-FWFM Interconnect products Other Amphenol Board Level Interconnect BRISTLE BRUSH BUNCH B3 CONTACT INTERCONNECTS AMPHENOL CONTINUES TO DEVELOP INTERCONNECTS THAT MEET THE DEMANDS OF THE AVIONICS INDUSTRY Starting with the development of the B3 contact, incorporated into the low mating force PCB connectors, the LRM line replaceable module followed as the avionics high density rectangular interconnect solution. LRM interconnects are combinations of module and backplane inserts, in one bay, two bay, three bay or more configurations. LRM products are used on major programs of aircraft and military vehicles. This page briefly describes the LRM family of connectors. For complete information QMFBTFTFF"NQIFOPM)JHI1FSGPSNBODF-JOF3FQMBDFBCMF.PEVMF -3. *OUFSDPOOFDUT catalog.* The Brush contact has superior performance in LRM interconnects due to its low mating force, stable electrical performance and extended life. Other LRM features include: t t t t t t t Backplane versatility: available with through-hole solder posts or with compliant pins for solderless applications Wide range of PCB/heat sink accommodations with standard surface mount tails or flex termination Polarization keys - up to 4096 possible keying positions Superior intermittancy-free performance under vibration Dielectric withstanding voltage: Staggered grid and GEN-X styles: 100 volts at sea MFWFM EVFUPUIFJODPSQPSBUJPOPG&4%TIJFME Temperature range: suitable for vapor phase soldering; normal operating temp. is o$UP $ $VSSFOUSBUJOH"EFSBUFEUP"UZQJDBM EFQFOEBOUPOMPBEJOH HIGH SPEED LRM GIGASTAK AND DIGASTAK INSERTS More and more speed is needed in today's interconnection products. Amphenol has recently developed a new family of high speed LRM connectors that are capable of BDIJFWJOHEBUBSBUFTJOFYDFTTPG(CQTWJBPINNBUDIFEJNQFEBODFEJGGFSFOtial pairs. Each insert arrangement has been optimized through strategic placement of signal and ground contacts for the perfect balance of impedance control and cross talk mitigation for a given data rate. As an enhancement over the standard LRM, this new series offers a unique solderless termination to module cards via Amphenol Intercon's cStack technology. 75 "NQIFOPMt#PBSE-FWFM Interconnect products 76 Other Amphenol Board Level Interconnect VIPER(R) INTERCONNECT PLATFORM Amphenol's VIPER(R) connector is a shielded, high-density, high-speed press fit, modular interconnect system. Optimized for differential pair architectures on a 1.8mm x 1.35mm grid, the waferized daughtercard assembly also provides single-ended and power wafer options integrated onto a stainless steel stiffener with stainless steel guidance and keying blocks. The backplane modules are available in 8 and 16 row increments on a 1.8mm x 1.8mm grid, with or without keying location blocks abd integrated stainless steel guidepin/keys. The new backplane signal contacts incorporate a highly reliable 4-points-of-contac beam design and the ground contacts leverage Amphenol's 40 year experience with robust compliant pin and contact fork designs. Key Features t t t t t t t t t t %FTJHOFEGPS (CQTEBUBSBUFQFSGPSNBODF 100 ohm impedance for differential pair configuration Separable interface offering 70 single-ended sigOBMTNNBOEEJGGFSFOUJBMTJHOBMTNN Reliable, redundant opposing cantilever contact beam design (SFBUFS UIBO Z NN 9 BOE : USBOTMBUJPO JO fully mated condition &4% QSPUFDUJPO TVQQPSUT MFWFM NBJOUFOBODF designs Ruggedized vibration performance greater than 0.6 G)[ (SNT Eye-of-the-needle compliant pins designed to pierce most conformal coatings Flexible modular design ideal for a standard 3U and 6U applications as well as unique custom configurations incorporating RF microwave and optical MT solutions Fully footprint-compatible with VITA 46 and VITA 48 standards ABS developped the VIPER interconnect platform after FYUFOTJWF WPJDF PG UIF DPTUVNFS 70$ JOUFSWJFXT These interviews drove us to meet or exceed future avionic high-level vibration, mechanical shock and condensing moisture test requirements. Customers emphasized the need for ruggedization in the next generation of military packaging solutions thath can scale to higher bandwidths without costly and timeconsuming chassis redesigns. The VIPER connector platform offers the ability to scale from 80 Mbps to PWFS (CQT XIJMF SFUBJOJOH UIF TBNF NN UP NNCBDLQMBOFTMPUQJUDI Electrical attributes t t t Data rate: 6.5 Gbps scalable 10 Gbps t t Differential Impedance: 100 ohms Differential Insertion Loss: -5 dB up o 5 GHz (10 (CQT Differential return Loss: -5 dB up to 5 GHz (10 (CQT Far End Crosstalk: -35 dB up to 8 Ghz Near End Crosstalk: -33 dB up to 8 Ghz Signal Contacts: 1 amp Power Wafer: 8 amps per wafer at 10C T-Rise Compliant Pin to Plated Thru Hole Resistance: 1 t t milliohm max Dielectric Withstanding Voltage: 500 volts RMS Insultaion Resistance: 1000 megohms1 t t t t "NQIFOPMt#PBSE-FWFM Interconnect products 77 Other Amphenol Board Level Interconnect VIPER(R) INTERCONNECT PLATFORM VIPER MATERIALS AND FINISHES ENVIRONMENTAL ATTRIBUTES Backplane Signal and Ground Contacts: $DPQQFSBMMPZ NN 'JOJTIJTNNOJDLFMNJOJNVNBMMPWFS QFS 4"&".422/ $MBTT * 4FMFDUJWF NN HPME NJOJNVN QFS "45.# 5ZQF** (SBEF$ $MBTTJOUIFNBUJOHBSFBNN reflowed tin/lead minimum selectively plated in the compliant pin area. Differential, Power and Single-Ended Temperature:$UP$ Random Vibration:NJOVUFTQFS9 :BOE;BYJTBU()[ Mechanical Shock: 50 G'rms in Y axis, 80 G'rms en X and Z axis, 11 milliseconds, half sine Temperature Life:IPVSTBU$ PRINTED CIRCUIT BOARD Daughtercard Wafer Leadframes: $DPQQFSBMMPZNN 'JOJTIJTNNOJDLFMNJOJNVNBMMPWFS QFS 4"&".422/ $MBTT * 4FMFDUJWF NN HPME NJOJNVN QFS "45.# 5ZQF** (SBEF$ $MBTTJOUIFNBUJOHBSFBNN reflowed tin/lead minimum selectively plated in the compliant pin area. Backplane Insulators and Daughtercard Wafer Insert Mold Material: (MBTTSFJOGPSDFEQPMZFTUFS -JRVJE$SZTUBM1PMZNFS 6-70 $PMPS#MBDL 'SPOUBOE3FBS4UJGGFOFST4UBJOMFTT4UFFM NN 5ZQF )BSE 'JOJTI QFS.JMM# Backplane Guide Pin: Stainless Steel, Type 303, Passivated. Daughtercard Connector Guidance and Keying Blocks: Stainless Steel, Type 440, Passivated. MECHANICAL ATTRIBUTES Signal and Ground Contact Normal Force: 85 grams per beam Signal and Ground Contact Engagement Force: 45 grams max, 35 grams typical Signal and Ground Contact Separation Force: HSBNT NBY HSBNT typical Signal and Ground Contact Durability: 500 cycles minimum Contact Wipe Length: NNNJOJNVNGPSHSPVOEDPOUBDUTNNNJOJmum for power and signal contacts Backplane Signal and Ground Compliant Pin Insertion Force: 4.9 kiloHSBNT NBYJNVN LJMPHSBNT UP LJMPHSBNT EFQFOEJOH PO UIF TVSface finish of PCB. Backplane Signal and Ground Compliant Pin Retention Force:LJMPgrams minimum Daughtercard Wafer Compliant Pin Insertion Force: 1.8 kilograms to 3.6 kilograms depending on the surface finish of PCB. Daughtercard Wafer Compliant Pin Retention Force: 1.6 kilograms minimum Translation:ZNNJOCPUI9BOE:EJSFDUJPOGVMMZNBUFE Slot Pitch: NN Minimum Backplane and Daughtercard Thickness:NN Daughtercard Pattern Primary Drilled Hole Size: 0.55mm Daughtercard Pattern Finished Hole Size: 0.46 0.05mm Backplane Pattern Primary Drilled Hole Size: 0.65mm Backplane Pattern Finished Hole Size: 0.56 0.05mm Radial Hole Wall Deformation: 0.04mm per side as measured from drilled hole. Axial Hole Wall Deformation: 0.03mm as measured in the vertical plane "NQIFOPMt#PBSE-FWFM Interconnect products 78 Other Amphenol Board Level Interconnect Amphenol tcs offers the widest range of low-crosstalk, modular connector solutions using innovative and field-proven technologies: BACKPLACE Backplane, Mezzanine, Orthogonal, Optical and Co-Planar. XCede(R) (CQT r.FFUTUIF*&&&BQW(#"4&,3TUBOEBSEXJUINBSHJO r6QUPEJGGFSFOUJBMQBJSTQFSJODI EJGGFSFOUJBMQBJSTQFSDFOUJNFUFS * Secondary routing channels significantly lower backplane costs * 85 and 100 ohm components are readily available in all configurations without the hassle ofretooling and requalification XCede(R) LC 10 Gbps * Mates with standard XCede backplane module * Daughtercard wafer designed without resonance damping polymer to optimize cost * Fully compatible with the XCede family of components, including power and guidance * Available in 85 and 100 ohm impedance eHSD(R) 10 Gbps r.FFUTUIF*&&&BQW(#"4&,3TUBOEBSE * Fully backwards compatible with VHDM-HSD, delivering up to 10 dB lower crosstalk * Scale existing systems to next generation speeds rSFBMEJGGFSFOUJBMQBJSTQFSMJOFBSJODI SFBMEJGGFSFOUJBMQBJSTQFSDFOUJNFUFS Ventura(R) (CQT * High-density, high-performance single-ended connector r(CQTEJGGFSFOUJBM (CQTTJOHMFFOEFE rSFBMTJHOBMTQFSJODI TJHOBMTQFSDFOUJNFUFS * Surface mount attach GbX(R) 5.0 Gbps rEJGGFSFOUJBMQBJSTQFSJODI EJGGFSFOUJBMQBJSTQFSDFOUJNFUFS r*EFBMGPSY9"6*MJOLT r'VMMSBOHFPGQSPWFODPNQPOFOUT FHQPXFS HVJEBODF QPMBSJ[JOH * Robust mechanical design GbX(R) U-Series (CQT * Enhanced footprint for improved impedance and crosstalk performance * Backplane modules are compatible with all generations of GbX daughtercards * Up to 10 dB crosstalk improvement on actual backplanes GbX(R) E-Series (CQT * Enhanced electrical performance r$SPTTUBMLBTMPXBT * Backplane module shares the same footprint as standard GbX GbX(R) L-Series < 1 Gbps * 1.85mm x 1.85mm open pin field version of GbX * Customize signal integrity performance by varying ground-to-signal ratio * Ideal for TTL sense and control and other low-speed data lines AirMax VS(R) (CQT AirMax VS is a registered trademark of FCI * Shieldless connector system * Cost-effective interconnect for multi-gigabit applications * Up to 63 differential pairs/inch * 3, 4, and 5-Pair standard and reverse gender available ApteraTM (CQT r-PXQSPGJMF IJHISFMJBCJMJUZQJFDFFEHFDBSEDPOOFDUPS r(CQTQFSGPSNBODFEJGGFSFOUJBM(CQTTJOHMFFOEFE * Low profile construction reduces minimum slot pitch between daughtercards to 10mm w * Right angle and stacker versions available VHDM-HSDTM 5 Gbps * Optimized for high-speed differential backplane applications rEJGGFSFOUJBMQBJSTQFSJODI EJGGFSFOUJBMQBJSTQFSDFOUJNFUFS * Modular design enables mix of single-ended and differential signals within the same connector VHDM(R) (CQT * Optimized for single-ended, high-density applications rSFBMTJHOBMTQFSJODI SFBMTJHOBMTQFSDFOUJNFUFS * Less than 5% crosstalk * Stripline shielding allows 100% of the pins to be used for signals VHDM(R) H-Series (CQT * Superior signal integrity * Backwards compatible with the full VHDM product family - design into same slot for fast, easy system upgrades rw NN 1$#IPMFGPSJNQSPWFEQFSGPSNBODF HDM(R) HDM(R) Plus < 1 Gbps r&DPOPNJDBMNNNPEVMBSEFTJHO rSFBMTJHOBMTQFSJODI DPOUBDUTQFSDFOUJNFUFS * Can operate in applications with rise times as low as 500 pico seconds CrossbowTM (CQT * XCede(R) technology optimized for orthogonal midplane architectures r.FFUTUIF*&&&BQW(#"4&,3TUBOEBSEXJUINBSHJO r%FNPOTUSBUFE0INTJNQFEBODFBDSPTTBOFOUJSFMJOL * Less than 1.5 picoseconds in-pair skew * Crosstalk < 1.5% at 50 picoseconds * 4 x 4, 6 x 6, 8 x 8 and 8 x 9 configurations available XCede(R) Co-planar (CQT * Right angle male enables co-planar board-to-board or board-to-cable high-speed interconnection * Mates with standard right female daughtercards * Available in 85 and 100 ohm impedance GbX(R) Right Angle Male (RAM) 5.0 Gbps * Enables co-planar board-to-board or board-to-cable high-speed interconnection r$VSSFOUMZBWBJMBCMFJOQBJSDPOGJHVSBUJPO EJGGFSFOUJBMQBJSTQFSMJOFBSJODI * Available in two different heights - standard RAM and extended RAM * High-speed differential and L-Series versions available VHDM(R) Right Angle Male (RAM) (CQT * Right angle male enables co-planar board-to-board or board-to-cable high-speed interconnection rSFBMTJHOBMTQFSMJOFBSJODI SFBMTJHOBMTQFSDFOUJNFUFS * Grow systems horizontally by creating traditional backplane components in a right angle orientation XCede(R) Stacker (CQT * 4-pair size provides density and mechanical robustness to address increasing I/O counts * Modular construction and guidance options allow optimized connector lengths for each application * Heights available from 15mm up to 44mm * Press fit attachment NeXLev(R) 12.5 Gbps * Enhanced BGA attachment process to increase SMT process yields rNJDSPODPQMBOBSJUZ rSFBMTJHOBMTQFSMJOFBSDFOUJNFUFS TJHOBMTQFSJODI rTUBDLJOHIFJHIUTGSPNNN VHDM(R) Stacker (CQT * Press fit solution for stacking applications * Route single-ended or differentially rSFBMTJHOBMTQFSJODI SFBMTJHOBMTQFSDFOUJNFUFS * Stacking heights from 18mm and up ApteraTM Stacker (CQT * Mezzanine solution provides the same electrical performance as standard Aptera * Mates with standard backplane modules * Available in 40mm board-to-board stack heights * Uses proven GbX compliant pin technology HDM(R) Stacker < 1 Gbps r"WBJMBCMFJOQJOBOEQJOTJHOBMNPEVMFTJOTPMEFSUBJMPSQSFTTGJUDPOGJHVSBUJPOT rSFBMTJHOBMTQFSJODI DPOUBDUTQFSDFOUJNFUFS * 30 Amp power module, end stackable r4UBDLJOHIFJHIUTGSPNUPNN XCede(R) Cable Connectors & Assemblies (CQT * Ideal for front panel and backplane connections * Provides the same industry leading electrical and mechanical performance as the standard right angle connectors r"WBJMBCMFJO1BJSBOE1BJSDPOGJHVSBUJPOT * Tightly matched impedance control at cable termination * Wafers are available for 85 and 100 ohm impedance r4VQQPSUTNVMUJQMFDBCMFEFTJHOTSBOHJOHGSPNUP"8( HD-OptyxTM * Blind-mate, modular, fiber optic interconnect solution * High fiber count r4VQQPSUTNNTJOHMFGJCFSBOE.5NVMUJGJCFSGFSSVMFT * Single-mode and multi-mode capable MEZZANINE CO-PLANAR ORTHOGONAL BACKPLACE VHDM(R) L-Series < 1 Gbps * Open pin-field version of VHDM * Fully compatible with the full VHDM product family to optimize cost and performance by mixing high- and low-speed signals on the same connector * Ideal for TTL sense and control and other low-speed data lines CABLES 79 OPTICAL "NQIFOPMt#PBSE-FWFM Interconnect products "NQIFOPMt#PBSE-FWFM Interconnect products 80 Other Amphenol Board Level Interconnect RIGID PRINTED CIRCUIT BOARD CAPABILITIES Amphenol Printed Circuits' "1$ DBQBCJMJUJFTBSFBNPOH the world's broadest and most advanced, delivering consistent quality and reliability for demanding high-bandwidth systems and mission critical applications for more than ZFBST1SPWFOFOHJOFFSJOH and manufacturing expertise eliminates printed circuit board design obstacles. APC's North America printed circuit board operation provides tightly controlled processes for prototype through production printed circuit CPBSEWPMVNFT5IF square foot New Hampshire facility features state-of-theart PCB manufacturing equipment and optimized material handling to ensure the highest quality and consistency. Design formats Mentor PADS Cadence Zuken Manufacturing formats 0%# 1SFGFSSFE %9' (FSCFS9 Maximum panel size Y NNYNN Y NNYNN Y NNYNN Maximum panel thickness NN Layer count Up to 64 Interconnection formation types Back Drilled Buried SMT Dual Diameter Electrically Isolated 5ISV)PMF #MJOE -BTFS.FDIBOJDBM * Includes conductive and non-conductive fill Aspect ratio - drilled size Backplane Daughtercard Finished hole size $PNQMJBOU1JO 7JB "3EFQFOEFOU #VSJFE7JBT .JDSPWJBT 6QUPFMFDUSJDBMMBZFST Blind via aspect ratio Internal features -JOFT 4QBDJOH Buried Resistors Buried Capacitance $PSF5IJDLOFTT NN P[DPQQFS NN P[DPQQFS No No NN NJOJNVN External features -JOFT 4QBDJOH NN P[DPQQFS NN P[DPQQFS Materials )JHI5H'3 *ODMVEJOHQIFOPMJDDVSF Megtron 6 Isola FR408 Nelco 4000-13 & Nelco 4000-SI Rogers 4350/FR4 #5 #JTNBMFJNJEFUSJB[JOFSFTJO Copper processing P[VQUPP[ 6-P[ Impedance single & differential Surface finishes &MFDUSPMZUJD/J"V )BSE4PGU HASL Immersion Tin Reflowed Tin/Lead &/*( Immersion Silver OSP-Entek 106 Certifications "4$FSUJGJDBUJPO *1$$MBTT* **BOE*** *5"33FHJTUSBUJPO .*-13'B *40 *40 .*-13'C .*-1 "VUPQMPU &YDFMMPO )1(- %1' (FSCFS% *1$% 17:1 15:1 NN NN NN NN 5BDPOJD Gore Cyanate Ester Polyimide Rogers 4350 * Consult factory "NQIFOPMt#PBSE-FWFM Interconnect products 81 Other Amphenol Board Level Interconnect FLEXIBLE AND RIGID-FLEX PRINTED CIRCUIT BOARD CAPABILITIES APC is one of the industry's leading manufacturers of flexible and rigid-flex circuit interconnects. For more than 30 years, APC has been providing quick turn prototypes from initial concept through full production with cuttingedge technologies including interconnects with blind and buried vias, microvias, and bookbinder. Our assembly centers of excellence, located in Nashua, New Hampshire and Nogales, Mexico are fully ITAR qualified, providing competitive valueadded services including SMT, wave and manual throughhole assembly. APC works closely with our customers to understand their true system requirements. This allows us to deliver the most cost-effective interconnect solutions with up-front engineering and consistent manufacturing techniques. From functional testing and turn-key assembly, APC's commitment to our customers success is what sets us apart in the indus- Design formats DXF Gerber IGES PADS Panel size Y Y Y Y Y Panel thickness UP NNUPNN Layer count Interconnection formation types Thru Hole Buried Blind SMT Filled Vias Dual Diameter Finished hole size $PNQMJBOU1JO 3JHJE[POFPOMZ 7JB "3EFQFOEFOU #VSJFE7JBT .JDSPWJBT 6QUPFMFDUSJDBMMBZFST Blind via aspect ratio Internal features DVXFJHIUEFQFOEFOU -JOF 4QBDJOH Materials Polyimide - FR Polyimide - AP Polyimide - GI 4PMEFSNBTL Copper processing 1/4 oz up to 15 oz Impedance single & differential Surface finishes HASL Reflowed Tin/ Lead OSP-Entek 106 &/*( Assembly capabilities Full Turn-Key 5ISV)PMF 8BWF.BOVBM 4.5 1JDL1MBDF NNYNN NNYNN NNYNN NNYNN NNYNN Consult Factory NN NN NN NN NN NN Polyimide - Standard Acrylic Silver Epoxy Shielding Copper Epoxy Shielding '3 * Consult factory Immersion Tin Immersion Silver Bright Tin &MFDUSPMZUJD/J"V )BSE4PGU Wire-Bond $SJNQ 3P)4$PNQMJBODF Assembly finishes Conformal Coat - UR, Acrylic, Parylene, Flouropel, Glop Top Test capabilities Overmolding Impedance Testing Hi-Pot up to 5,000 VDC 1PJOUTQFS$JSDVJU Insulation Resistance up to 1,000 VDC 'PVS8JSF,FMWJOUP Bed of Nails Flying Probe Flex Cycling &OWJSPONFOUBM Functional Test Certifications .*-1 5ZQFT IPC-6013 Class I, II and III, Types 1-5 ITAR Registration *40 IPC-610 AS9100 Certification try. Amphenol in the world NORTH AMERICA Amphenol Pcd, Inc. 72 Cherry Hill Drive Beverly, MA. 01915 - USA Telephone: +1-978-624-3400 info@amphenolpcd.com Amphenol BACKPLANE SYSTEMS 18 Celina Avenue - Nashua, New Hampshire 03063 - USA Telephone: +1-603-883-5100 Fax: +1-603-883-0171 Amphenol FSI 1300 Central Expwy N, Suite 100 Allen, TX 75013 - USA Toll-Free: +800-472-4225 - Fax: +214-547-9344 info@fibersystems.com Amphenol AEROSPACE OPERATIONS 40-60 Delaware Street - Sidney, New York 13838-1395 - USA Telephone: +1-607-563-5011 Fax: +1-607-563-5157 Amphenol CANADA CORPORATION 605 Milner Avenue - Toronto, Ontario Canada M1B 5X6 Telephone: +1-416-291-4401 Fax: +1-416-292-0647 Amphenol TCS 44 Simon Street Nashua, NH 03060 Telephone: +1 603-879-3000 www.amphenol-tcs.com Amphenol IBERICA Edificio "Burgosol" c/Comunidad de Madrid, 35 bis Oficina No 55 ES - 28230 Las Rozas - Madrid - Spain Telephone: +34-91-640-73-02/03/04 Fax: +34-91-640-73-07 SEFEE ZI des Cazes - BP 243 12403 Saint Affrique - France Telephone: +33-5-6598-1100 Fax: +33-5-6549-3712 EUROPE Amphenol AIR LB 10 Rue Champ Raymond 08110 Carignan - France Telephone: +33-3-2422-3270 Fax: +33-3-2422-387 Amphenol AIR LB GmbH Am Kleinbahnhof 4 - 66740 Saarlouis - Germany Telephone: +49-6831-981-00 Fax: +49-6831-981-030 Amphenol BENELUX Zadelmaker 121 NL - 2401 PD Alphen aan den Rijn The Netherlands Telephone: +31-172-444-903 Fax: +31-172-240-254 Amphenol SCANDINAVIA Angsullsvagen 7 - S-187 51 Taby - Sweden Telephone: +46-702-12-92-00 Fax: +46-702-63-46-77 Amphenol ITALIA Via Barbaiana n.5, 20020 Lainate - Milano - Italy Telephone: +39-02-93254-1 Fax: +39-02-93254-444 Amphenol SOCAPEX 948 Promenade de l'Arve - BP29 74311 Thyez Cedex - France Telephone: +33-4-5089-2800 Fax: +33-4-5096-1941 Amphenol LIMITED Thanet Way, Whitstable - Kent, CT5 3JF United Kingdom Telephone: +44-1227-773-200 Fax: +44-1227-276-571 Amphenol SOUTH EASTERN EUROPE 948 Promenade de l'Arve - BP29 74311 Thyez Cedex - France Telephone: +33-4-5089-2840 Fax: +33-4-5096-1941 Amphenol MIDDLE & EASTERN EUROPE Wiener gase 68 - 2380 Perchtoldsdorf - Austria Telephone: +43-699-10396-071 Fax: +43-699-40396-071 ASIA Amphenol DAESHIN 558 Sosa, SongNea Bucheon-city, Kyunggi-Do Korea 420-130 Telephone: +82-32-610-3800 Fax: +82-32-673-2507/665-6219 Amphenol INTERCONNECT INDIA PRIVATE LIMITED 105 Bhosari Industrial Area Pune 411 026 - India Telephone: +91-20-7120363/0463/0155 Fax: +91-20-712-0581 Amphenol JAPAN 689-1, Iseochi Ritto-shi Shiga 520-3044 - Japan Telephone: +81-77-553-8501 Fax: +81-77-551-2200 Amphenol PCD CO.LTD 2/F Building A5, Huafeng Technology Park Guan Tian, Bei Huan Road, Shi Yan Street BaoAn District, Shenzhen, China 518132 Tel: +86-755-8173-8281 Fax: +86-755-8173-8180 www.amphenolpcd.com.cn OTHER AREAS Amphenol ARGENTINA Av. Callao 930 2do piso Oficina B "Plaza" C1023 - AAP Buenos Aires - Argentina Telephone: +54-11-4815-6886 Fax: +54-11-4814-5779 Amphenol DO BRAZIL Rua Diogo Moreira,132, 20 andar, rooms 2001-2-3 CEP: 05423-010 Sao Paulo SP - Brazil Telephone: +55-11-3815-1003 Fax: +55-11-3815-1629 Amphenol SOUTH AFRICA 30 Impala Road 2196 Chislehurston-Sandton - South Africa Telephone: +27-11-783-9517 Fax : +27-11-783-9519 Amphenol AUSTRALIA PTY LIMITED 2 Fiveways Blvd, Keysborough Melbourne, Victoria 3173 - Australia Telephone: +61-3-8796-8888 Fax: +61-3-8796-8801 Amphenol MEXICO Prolongacion Reforma 61 - 6 B2 Col. Paseo de las Lomas - C.P.013130 - Mexico Telephone: +52-55-5258-9984 Fax: +52-55-5081-6890 Amphenol TURKEY Ayazaga Mah. Meydan Sok No:28 Beybi Giz Plaza Kat:26 34396 Maslak - Istanbul / Turkey Telephone: +90-212-335-25-01 Fax: +90-212-335-25-00 BAR TEC LTD 4 Hagavish St, PO Box 279 Kfar Saba 44102 - Israel Telephone: +972-9-767-4097 Fax: +972-9-767-4324 Amphenol RUSSIA 8 bldg., 2 Yaroslavskaja Street, 129164 Moscow - Russia Telephone: +7-495-937-6341 Fax: +7-495-937-6319 The information given in this document are as a guideline only. We reserve the right to modify our products in any way we deem necessary. Any duplication is prohibited, unless approved in writing. Design by Steven Kilgallont+VOF Gestion & Edition by AMPHENOL & COMALYON DOC-000090-ANG Amphenol Your local Contact: For more information, please visit our website: www.pcb-interconnect.com